summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-09drm/amdgpu/gfx9: rework lbpw enable codeAlex Deucher
To avoid changing the global lbpw module parameter directly. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-09drm/ttm: remove set but not used variable 'driver'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/ttm/ttm_execbuf_util.c: In function 'ttm_eu_fence_buffer_objects': drivers/gpu/drm/ttm/ttm_execbuf_util.c:190:24: warning: variable 'driver' set but not used [-Wunused-but-set-variable] It not used any more after commit f2c24b83ae90 ("drm/ttm: flip the switch, and convert to dma_fence") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-09drm/amdgpu: abstract the function of enter/exit safe mode for RLCLikun Gao
Abstract the function of amdgpu_gfx_rlc_enter/exit_safe_mode and some part of rlc_init to improve the reusability of RLC. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-09drm/amdgpu: separate amdgpu_rlc into a single fileLikun Gao
Separate the function and struct of RLC from the file of GFX. Abstract the function of amdgpu_gfx_rlc_fini. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-09drm/amdgpu: unify rlc function into structureLikun Gao
Put function rlc_init,rlc_fini,rlc_resume,rlc_stop,rlc_start into structure amdgpu_rlc_funcs and change the method to call rlc function for each verssion of GFX. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-09drm/amdgpu: Each PSP need to get latest topology info on XGMI configurationshaoyunl
Driver need to call each psp instance to get topology info before set topology Signed-off-by: shaoyunl <Shaoyun.Liu@amd.com> reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-09x86/cpu/vmware: Do not trace vmware_sched_clock()Steven Rostedt (VMware)
When running function tracing on a Linux guest running on VMware Workstation, the guest would crash. This is due to tracing of the sched_clock internal call of the VMware vmware_sched_clock(), which causes an infinite recursion within the tracing code (clock calls must not be traced). Make vmware_sched_clock() not traced by ftrace. Fixes: 80e9a4f21fd7c ("x86/vmware: Add paravirt sched clock") Reported-by: GwanYeong Kim <gy741.kim@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Alok Kataria <akataria@vmware.com> CC: GwanYeong Kim <gy741.kim@gmail.com> CC: "H. Peter Anvin" <hpa@zytor.com> CC: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org CC: Thomas Gleixner <tglx@linutronix.de> CC: virtualization@lists.linux-foundation.org CC: x86-ml <x86@kernel.org> Link: http://lkml.kernel.org/r/20181109152207.4d3e7d70@gandalf.local.home
2018-11-09drm/i915/query: fix subslice lengthDaniele Ceraolo Spurio
We dump the info as an array of u8, so we want to know the length in number of bytes. Current code is still safe because the variable we use BITS_PER_TYPE on is a u8. Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181109004013.34394-1-daniele.ceraolospurio@intel.com
2018-11-09drm/i915: fix subslice mask array sizeDaniele Ceraolo Spurio
We have a subslice mask per slice, not per subslice. MAX_SUBSLICES > MAX_SLICES, so the wrong size didn't cause any issue apart from using extra memory. Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106182918.5748-1-daniele.ceraolospurio@intel.com
2018-11-09drm/i915/psr: Move intel_psr_disable_source() code to intel_psr_disable_locked()José Roberto de Souza
In the past we had hooks to configure HW for VLV/CHV too, in the drop of VLV/CHV support the intel_psr_disable_source() code was not moved to the caller, so doing it here. Suggested-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106190843.18009-4-jose.souza@intel.com
2018-11-09drm/i915/icl: Reset PSR interruptionsJosé Roberto de Souza
All other interruptions gen11 interruptions are reset in gen11_irq_reset() also it is done for other gens that supports PSR. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106190843.18009-3-jose.souza@intel.com
2018-11-09drm/i915/psr: Always wait for idle state when disabling PSRJosé Roberto de Souza
It should always wait for idle state when disabling PSR because PSR could be inactive due a call to intel_psr_exit() and while PSR is still being disabled asynchronously userspace could change the modeset causing a call to psr_disable() that will not wait for PSR idle and then PSR will be enabled again while PSR is still not idle. v2: rebased on top of the patch reusing psr_exit() Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106190843.18009-2-jose.souza@intel.com
2018-11-09drm/i915/psr: Use intel_psr_exit() in intel_psr_disable_source()José Roberto de Souza
Both functions have the same code to disable PSR, so let's reuse that code instead of duplicate. Suggested-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106190843.18009-1-jose.souza@intel.com
2018-11-09usb: typec: ucsi: add support for Cypress CCGxAjay Gupta
Latest NVIDIA GPU cards have a Cypress CCGx Type-C controller over I2C interface. This UCSI I2C driver uses I2C bus driver interface for communicating with Type-C controller. Signed-off-by: Ajay Gupta <ajayg@nvidia.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-09serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeoutYoshihiro Shimoda
This patch fixes an issue that the sci_remove() could not remove dev_attr_rx_fifo_timeout because uart_remove_one_port() set the port->port.type to PORT_UNKNOWN. Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Fixes: 5d23188a473d ("serial: sh-sci: make RX FIFO parameters tunable via sysfs") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09drm/dp_mst: Check if primary mstb is nullStanislav Lisovskiy
Unfortunately drm_dp_get_mst_branch_device which is called from both drm_dp_mst_handle_down_rep and drm_dp_mst_handle_up_rep seem to rely on that mgr->mst_primary is not NULL, which seem to be wrong as it can be cleared with simultaneous mode set, if probing fails or in other case. mgr->lock mutex doesn't protect against that as it might just get assigned to NULL right before, not simultaneously. There are currently bugs 107738, 108616 bugs which crash in drm_dp_get_mst_branch_device, caused by this issue. v2: Refactored the code, as it was nicely noticed. Fixed Bugzilla bug numbers(second was 108616, but not 108816) and added links. [changed title and added stable cc] Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108616 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107738 Link: https://patchwork.freedesktop.org/patch/msgid/20181109090012.24438-1-stanislav.lisovskiy@intel.com
2018-11-09drm/i915: Generalize skl_ddb_allocation_overlaps()Ville Syrjälä
Make skl_ddb_allocation_overlaps() useful for other callers besides skl_update_crtcs(). We'll need it to do plane updates as well. And while we're here we can reduce the stack utilization a bit by noting that each struct skl_ddb_entry is 4 bytes whereas a pointer to one is 8 bytes (on 64bit). So we'll switch to an array of structs from the array of pointers we used before. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101150605.18235-9-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-11-09drm/i915: Clean up skl+ PLANE_POS vs. scaler handlingVille Syrjälä
On skl+ the scaler (when enabled) will take care of the plane output position. Make the code less ugly by just setting crtc_x/y to 0 when the scaler is enabled. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101150605.18235-6-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-11-09drm/i915: Polish the skl+ plane keyval/msk/max register setupVille Syrjälä
Due to the constant alpha we're going to have to program two of the the tree keying registers anyway, so might as well always program all three. And parametrize the plane constant alpha define while at it. v2: Rebase due to input CSC Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107184138.31359-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-11-09drm/i915: Remove the PS_PWR_GATE write from skl_program_scaler()Ville Syrjälä
If we don't need the PS_PWR_GATE write when programming the pipe scaler I don't see why we'd need it for plane scalers either. Just remove it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101150605.18235-4-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-11-09i2c: nvidia-gpu: make pm_ops staticWolfram Sang
sparse rightfully says: warning: symbol 'gpu_i2c_driver_pm' was not declared. Should it be static? Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-09i2c: add i2c bus driver for NVIDIA GPUAjay Gupta
Latest NVIDIA GPU card has USB Type-C interface. There is a Type-C controller which can be accessed over I2C. This driver adds I2C bus driver to communicate with Type-C controller. I2C client driver will be part of USB Type-C UCSI driver. Signed-off-by: Ajay Gupta <ajayg@nvidia.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [wsa: kept Makefile sorting] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-09ext4: missing !bh check in ext4_xattr_inode_write()Vasily Averin
According to Ted Ts'o ext4_getblk() called in ext4_xattr_inode_write() should not return bh = NULL The only time that bh could be NULL, then, would be in the case of something really going wrong; a programming error elsewhere (perhaps a wild pointer dereference) or I/O error causing on-disk file system corruption (although that would be highly unlikely given that we had *just* allocated the blocks and so the metadata blocks in question probably would still be in the cache). Fixes: e50e5129f384 ("ext4: xattr-in-inode support") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.13
2018-11-09can: flexcan: use can_rx_offload_queue_sorted() for flexcan_irq_bus_*()Oleksij Rempel
Currently, in case of bus error, driver will generate error message and put in the tail of the message queue. To avoid confusions, this change should place the bus related messages in proper order. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-09can: rx-offload: rename can_rx_offload_irq_queue_err_skb() to ↵Oleksij Rempel
can_rx_offload_queue_tail() This function has nothing todo with error. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-09can: flexcan: handle tx-complete CAN frames via rx-offload infrastructureOleksij Rempel
Current flexcan driver will put TX-ECHO in regular unsorted way, in this case TX-ECHO can come after the response to the same TXed message. In some cases, for example for J1939 stack, things will break. This patch is using new rx-offload API to put the messages just in the right place. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-09xhci: Add quirk to workaround the errata seen on Cavium Thunder-X2 SocCherian, George
Implement workaround for ThunderX2 Errata-129 (documented in CN99XX Known Issues" available at Cavium support site). As per ThunderX2errata-129, USB 2 device may come up as USB 1 if a connection to a USB 1 device is followed by another connection to a USB 2 device, the link will come up as USB 1 for the USB 2 device. Resolution: Reset the PHY after the USB 1 device is disconnected. The PHY reset sequence is done using private registers in XHCI register space. After the PHY is reset we check for the PLL lock status and retry the operation if it fails. From our tests, retrying 4 times is sufficient. Add a new quirk flag XHCI_RESET_PLL_ON_DISCONNECT to invoke the workaround in handle_xhci_port_status(). Cc: stable@vger.kernel.org Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09usb: xhci: fix timeout for transition from RExit to U0Aaron Ma
This definition is used by msecs_to_jiffies in milliseconds. According to the comments, max rexit timeout should be 20ms. Align with the comments to properly calculate the delay. Verified on Sunrise Point-LP and Cannon Lake. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09usb: xhci: fix uninitialized completion when USB3 port got wrong statusAaron Ma
Realtek USB3.0 Card Reader [0bda:0328] reports wrong port status on Cannon lake PCH USB3.1 xHCI [8086:a36d] after resume from S3, after clear port reset it works fine. Since this device is registered on USB3 roothub at boot, when port status reports not superspeed, xhci_get_port_status will call an uninitialized completion in bus_state[0]. Kernel will hang because of NULL pointer. Restrict the USB2 resume status check in USB2 roothub to fix hang issue. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09xhci: Add check for invalid byte size error when UAS devices are connected.Sandeep Singh
Observed "TRB completion code (27)" error which corresponds to Stopped - Length Invalid error(xhci spec section 4.17.4) while connecting USB to SATA bridge. Looks like this case was not considered when the following patch[1] was committed. Hence adding this new check which can prevent the invalid byte size error. [1] ade2e3a xhci: handle transfer events without TRB pointer Cc: <stable@vger.kernel.org> Signed-off-by: Sandeep Singh <sandeep.singh@amd.com> cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com> cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09xhci: handle port status events for removed USB3 hcdMathias Nyman
At xhci removal the USB3 hcd (shared_hcd) is removed before the primary USB2 hcd. Interrupts for port status changes may still occur for USB3 ports after the shared_hcd is freed, causing NULL pointer dereference. Check if xhci->shared_hcd is still valid before handing USB3 port events Cc: <stable@vger.kernel.org> Reported-by: Peter Chen <peter.chen@nxp.com> Tested-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09xhci: Fix leaking USB3 shared_hcd at xhci removalMathias Nyman
Ensure that the shared_hcd pointer is valid when calling usb_put_hcd() The shared_hcd is removed and freed in xhci by first calling usb_remove_hcd(xhci->shared_hcd), and later usb_put_hcd(xhci->shared_hcd) Afer commit fe190ed0d602 ("xhci: Do not halt the host until both HCD have disconnected their devices.") the shared_hcd was never properly put as xhci->shared_hcd was set to NULL before usb_put_hcd(xhci->shared_hcd) was called. shared_hcd (USB3) is removed before primary hcd (USB2). While removing the primary hcd we might need to handle xhci interrupts to cleanly remove last USB2 devices, therefore we need to set xhci->shared_hcd to NULL before removing the primary hcd to let xhci interrupt handler know shared_hcd is no longer available. xhci-plat.c, xhci-histb.c and xhci-mtk first create both their hcd's before adding them. so to keep the correct reverse removal order use a temporary shared_hcd variable for them. For more details see commit 4ac53087d6d4 ("usb: xhci: plat: Create both HCDs before adding them") Fixes: fe190ed0d602 ("xhci: Do not halt the host until both HCD have disconnected their devices.") Cc: Joel Stanley <joel@jms.id.au> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Jianguo Sun <sunjianguo1@huawei.com> Cc: <stable@vger.kernel.org> Reported-by: Jack Pham <jackp@codeaurora.org> Tested-by: Jack Pham <jackp@codeaurora.org> Tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09i2c: qcom-geni: Fix runtime PM mismatch with child devicesStephen Boyd
We need to enable runtime PM on this i2c controller before populating child devices with i2c_add_adapter(). Otherwise, if a child device uses runtime PM and stays runtime PM enabled we'll get the following warning at boot. Enabling runtime PM for inactive device (a98000.i2c) with active children [...] Call trace: pm_runtime_enable+0xd8/0xf8 geni_i2c_probe+0x440/0x460 platform_drv_probe+0x74/0xc8 [...] Let's move the runtime PM enabling and setup to before we add the adapter, so that this device can respond to runtime PM requests from children. Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-09MAINTAINERS: Add entry for i2c-omap driverVignesh R
Add separate entry for i2c-omap and add my name as maintainer for this driver. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-09i2c: omap: Enable for ARCH_K3Vignesh R
Allow I2C_OMAP to be built for K3 platforms. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-09dt-bindings: i2c: omap: Add new compatible for AM654 SoCsVignesh R
AM654 SoCs have same I2C IP as OMAP SoCs. Add new compatible to handle AM654 SoCs. While at that reformat the existing compatible list for older SoCs to list one valid compatible per line. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-09drm/i915/mst: Drop pre_pll_enable null checkJosé Roberto de Souza
MST is only supported in DDI ports that have this hook, so the null check can be dropped. Suggested-by: Imre Deak <imre.deak@intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107235449.32264-3-jose.souza@intel.com
2018-11-09drm/i915: Release DDI power well references in MST portsJosé Roberto de Souza
MST ports did not had the post_pll_disable() hook causing the references get in pre_pll_enable() never being released causing DDI and AUX CH being enabled all the times. v2: renamed intel_mst_post_pll_disable_dp() parameters Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107235449.32264-2-jose.souza@intel.com
2018-11-09drm/i915: Reuse the aux_domain cachedJosé Roberto de Souza
intel_dp_detect() caches the aux_domain in the beginning of the function as it is used twice, so lets also use it as the aux_domain don't change in runtime. v3: returning intel_dp_retrain_link() error insted of connector_status_disconnected Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107235449.32264-1-jose.souza@intel.com
2018-11-09can: rx-offload: introduce can_rx_offload_get_echo_skb() and ↵Oleksij Rempel
can_rx_offload_queue_sorted() functions Current CAN framework can't guarantee proper/chronological order of RX and TX-ECHO messages. To make this possible, drivers should use this functions instead of can_get_echo_skb(). Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-09can: dev: __can_get_echo_skb(): print error message, if trying to echo non ↵Marc Kleine-Budde
existing skb Prior to echoing a successfully transmitted CAN frame (by calling can_get_echo_skb()), CAN drivers have to put the CAN frame (by calling can_put_echo_skb() in the transmit function). These put and get function take an index as parameter, which is used to identify the CAN frame. A driver calling can_get_echo_skb() with a index not pointing to a skb is a BUG, so add an appropriate error message. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-09can: dev: __can_get_echo_skb(): Don't crash the kernel if can_priv::echo_skb ↵Marc Kleine-Budde
is accessed out of bounds If the "struct can_priv::echo_skb" is accessed out of bounds would lead to a kernel crash. Better print a sensible warning message instead and try to recover. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-09can: dev: __can_get_echo_skb(): replace struct can_frame by canfd_frame to ↵Marc Kleine-Budde
access frame length This patch replaces the use of "struct can_frame::can_dlc" by "struct canfd_frame::len" to access the frame's length. As it is ensured that both structures have a compatible memory layout for this member this is no functional change. Futher, this compatibility is documented in a comment. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-09can: dev: can_get_echo_skb(): factor out non sending code to ↵Marc Kleine-Budde
__can_get_echo_skb() This patch factors out all non sending parts of can_get_echo_skb() into a seperate function __can_get_echo_skb(), so that it can be re-used in an upcoming patch. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-09can: flexcan: remove not needed struct flexcan_priv::tx_mb and struct ↵Marc Kleine-Budde
flexcan_priv::tx_mb_idx The previous patch changes the TX path to always use the last mailbox regardless of the used offload scheme (rx-fifo or timestamp based). This means members "tx_mb" and "tx_mb_idx" of the struct flexcan_priv don't depend on the offload scheme, so replace them by compile time constants. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-09can: flexcan: Always use last mailbox for TXAlexander Stein
Essentially this patch moves the TX mailbox to position 63, regardless of timestamp based offloading or RX FIFO. So mainly the iflag register usage regarding TX has changed. The rest is consolidating RX FIFO and timestamp offloading as they now use both the same TX mailbox. The reason is a very annoying behavior regarding sending RTR frames when _not_ using RX FIFO: If a TX mailbox sent a RTR frame it becomes a RX mailbox. For that reason flexcan_irq disables the TX mailbox again. But if during the time the RTR was sent and the TX mailbox is disabled a new CAN frames is received, it is lost without notice. The reason is that so-called "Move-in" process starts from the lowest mailbox which happen to be a TX mailbox set to EMPTY. Steps to reproduce (I used an imx7d): 1. generate regular bursts of messages 2. send a RTR from flexcan with higher priority than burst messages every 1ms, e.g. cangen -I 0x100 -L 0 -g 1 -R can0 3. notice a lost message without notification after some seconds When running an iperf in parallel this problem is occurring even more frequently. Using filters is not possible as at least one single CAN-ID is allowed. Handling the TX MB during RX is also not possible as there is no race-free disable of RX MB. There is still a slight window when the described problem can occur. But for that all RX MB must be in use which is essentially next to an overrun. Still there will be no indication if it ever occurs. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-09can: flexcan: Unlock the MB unconditionallyPankaj Bansal
Unlock the MB irrespective of reception method being FIFO or timestamp based. It is optional but recommended to unlock Mailbox as soon as possible and make it available for reception. Reported-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-09can: hi311x: Use level-triggered interruptLukas Wunner
If the hi3110 shares the SPI bus with another traffic-intensive device and packets are received in high volume (by a separate machine sending with "cangen -g 0 -i -x"), reception stops after a few minutes and the counter in /proc/interrupts stops incrementing. Bus state is "active". Bringing the interface down and back up reconvenes the reception. The issue is not observed when the hi3110 is the sole device on the SPI bus. Using a level-triggered interrupt makes the issue go away and lets the hi3110 successfully receive 2 GByte over the course of 5 days while a ks8851 Ethernet chip on the same SPI bus handles 6 GByte of traffic. Unfortunately the hi3110 datasheet is mum on the trigger type. The pin description on page 3 only specifies the polarity (active high): http://www.holtic.com/documents/371-hi-3110_v-rev-kpdf.do Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Akshay Bhat <akshay.bhat@timesys.com> Cc: Casey Fitzpatrick <casey.fitzpatrick@timesys.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-09dt-bindings: can: rcar_can: Add r8a774a1 supportFabrizio Castro
Document RZ/G2M (r8a774a1) SoC specific bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-11-09can: rcar_can: Fix erroneous registrationFabrizio Castro
Assigning 2 to "renesas,can-clock-select" tricks the driver into registering the CAN interface, even though we don't want that. This patch improves one of the checks to prevent that from happening. Fixes: 862e2b6af9413b43 ("can: rcar_can: support all input clocks") Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit (git 2.34.1) at 2025-09-13 20:03:51 +0000