summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-11drm/i915/execlists: Enable timeslice on partial virtual engine dequeueChris Wilson
If we stop filling the ELSP due to an incompatible virtual engine request, check if we should enable the timeslice on behalf of the queue. This fixes the case where we are inspecting the last->next element when we know that the last element is the last request in the execution queue, and so decided we did not need to enable timeslicing despite the intent to do so! Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200306113012.3184606-1-chris@chris-wilson.co.uk (cherry picked from commit 3df2deed411e0f1b7312baf0139aab8bba4c0410) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-11drm/i915: be more solid in checking the alignmentMatthew Auld
The alignment is u64, and yet is_power_of_2() assumes unsigned long, which might give different results between 32b and 64b kernel. Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200305203534.210466-1-matthew.auld@intel.com Cc: stable@vger.kernel.org (cherry picked from commit 2920516b2f719546f55079bc39a7fe409d9e80ab) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-11drm/i915/gvt: Fix dma-buf display blur issue on CFLTina Zhang
Commit c3b5a8430daad ("drm/i915/gvt: Enable gfx virtualiztion for CFL") added the support on CFL. The vgpu emulation hotplug support on CFL was supposed to be included in that patch. Without the vgpu emulation hotplug support, the dma-buf based display gives us a blur face. So fix this issue by adding the vgpu emulation hotplug support on CFL. Fixes: c3b5a8430daad ("drm/i915/gvt: Enable gfx virtualiztion for CFL") Signed-off-by: Tina Zhang <tina.zhang@intel.com> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200227010041.32248-1-tina.zhang@intel.com (cherry picked from commit 135dde8853c7e00f6002e710f7e4787ed8585c0e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-11drm/i915: Return early for await_start on same timelineChris Wilson
Requests within a timeline are ordered by that timeline, so awaiting for the start of a request within the timeline is a no-op. This used to work by falling out of the mutex_trylock() as the signaler and waiter had the same timeline and not returning an error. Fixes: 6a79d848403d ("drm/i915: Lock signaler timeline while navigating") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200305134822.2750496-1-chris@chris-wilson.co.uk (cherry picked from commit ab7a69020fb5d5c7ba19fba60f62fd6f9ca9f779) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-11drm/i915: Actually emit the await_startChris Wilson
Fix the inverted test to emit the wait on the end of the previous request if we /haven't/ already. Fixes: 6a79d848403d ("drm/i915: Lock signaler timeline while navigating") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200305104210.2619967-1-chris@chris-wilson.co.uk (cherry picked from commit 07e9c59d63df6a1c44c1975c01827ba18b69270a) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-11dpaa_eth: Remove unnecessary boolean expression in dpaa_get_headroomNathan Chancellor
Clang warns: drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2860:9: warning: converting the result of '?:' with integer constants to a boolean always evaluates to 'true' [-Wtautological-constant-compare] return DPAA_FD_DATA_ALIGNMENT ? ALIGN(headroom, ^ drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:131:34: note: expanded from macro 'DPAA_FD_DATA_ALIGNMENT' \#define DPAA_FD_DATA_ALIGNMENT (fman_has_errata_a050385() ? 64 : 16) ^ 1 warning generated. This was exposed by commit 3c68b8fffb48 ("dpaa_eth: FMan erratum A050385 workaround") even though it appears to have been an issue since the introductory commit 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet") since DPAA_FD_DATA_ALIGNMENT has never been able to be zero. Just replace the whole boolean expression with the true branch, as it is always been true. Link: https://github.com/ClangBuiltLinux/linux/issues/928 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscryptLinus Torvalds
Pull fscrypt fix from Eric Biggers: "Fix a bug where if userspace is writing to encrypted files while the FS_IOC_REMOVE_ENCRYPTION_KEY ioctl (introduced in v5.4) is running, dirty inodes could be evicted, causing writes could be lost or the filesystem to hang due to a use-after-free. This was encountered during real-world use, not just theoretical. Tested with the existing fscrypt xfstests, and with a new xfstest I wrote to reproduce this bug. This fix does expose an existing bug with '-o lazytime' that Ted is working on fixing, but this fix is more critical and needed anyway regardless of the lazytime fix" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: fscrypt: don't evict dirty inodes after removing key
2020-03-11Merge tag 'mac80211-for-net-2020-03-11' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A couple of fixes: * three netlink validation fixes * a mesh path selection fix ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11binderfs: use refcount for binder control devices tooChristian Brauner
Binderfs binder-control devices are cleaned up via binderfs_evict_inode too() which will use refcount_dec_and_test(). However, we missed to set the refcount for binderfs binder-control devices and so we underflowed when the binderfs instance got unmounted. Pretty obvious oversight and should have been part of the more general UAF fix. The good news is that having test cases (suprisingly) helps. Technically, we could detect that we're about to cleanup the binder-control dentry in binderfs_evict_inode() and then simply clean it up. But that makes the assumption that the binder driver itself will never make use of a binderfs binder-control device after the binderfs instance it belongs to has been unmounted and the superblock for it been destroyed. While it is unlikely to ever come to this let's be on the safe side. Performance-wise this also really doesn't matter since the binder-control device is only every really when creating the binderfs filesystem or creating additional binder devices. Both operations are pretty rare. Fixes: f0fe2c0f050d ("binder: prevent UAF for binderfs devices II") Link: https://lore.kernel.org/r/CA+G9fYusdfg7PMfC9Xce-xLT7NiyKSbgojpK35GOm=Pf9jXXrA@mail.gmail.com Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Todd Kjos <tkjos@google.com> Link: https://lore.kernel.org/r/20200311105309.1742827-1-christian.brauner@ubuntu.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11ARC: define __ALIGN_STR and __ALIGN symbols for ARCEugeniy Paltsev
The default defintions use fill pattern 0x90 for padding which for ARC generates unintended "ldh_s r12,[r0,0x20]" corresponding to opcode 0x9090 So use ".align 4" which insert a "nop_s" instruction instead. Cc: stable@vger.kernel.org Acked-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-03-11ARC: show_regs: reduce lines of outputVineet Gupta
Before ------ | CPU: 1 PID: 29061 Comm: tst-dynarray-at Not tainted 5.6.0-rc1-00002-g941fcc018ca6-dirty #12 | | [ECR ]: 0x00090000 => | [EFA ]: 0x00000000 | [ERET ]: 0x2004aa6c | @off 0x2aa6c in [/lib/libc-2.31.9000.so] VMA: 0x20020000 to 0x20122000 | [STAT32]: 0x80080a82 [IE U ] | BTA: 0x2004aa18 SP: 0x5ffff8a8 FP: 0x5ffff8fc | LPS: 0x2008788e LPE: 0x20087896 LPC: 0x00000000 | r00: 0x00000000 r01: 0x5ffff8a8 r02: 0x00000000 | r03: 0x00000008 r04: 0xffffffff r05: 0x00000000 | r06: 0x00000000 r07: 0x00000000 r08: 0x00000087 | r09: 0x00000000 r10: 0x2010691c r11: 0x00000020 | r12: 0x2003b214 r13: 0x5ffff8a8 r14: 0x20126e68 | r15: 0x2001f26c r16: 0x2012a000 r17: 0x00000001 | r18: 0x5ffff8fc r19: 0x00000000 r20: 0x5ffff948 | r21: 0x00000001 r22: 0xffffffff r23: 0x5fffff8c | r24: 0x4008c2a8 r25: 0x2001f6e0 After ----- | CPU: 1 PID: 29061 Comm: tst-dynarray-at Not tainted 5.6.0-rc1-00002-g941fcc018ca6-dirty #12 | @off 0x2aa6c in [/lib/libc-2.31.9000.so] VMA: 0x20020000 to 0x20122000 | ECR: 0x00090000 EFA: 0x00000000 ERET: 0x2004aa6c | STAT32: 0x80080a82 [IE U ] BTA: 0x2004aa18 | BLK: 0x2003b214 SP: 0x5ffff8a8 FP: 0x5ffff8fc | LPS: 0x2008788e LPE: 0x20087896 LPC: 0x00000000 | r00: 0x00000000 r01: 0x5ffff8a8 r02: 0x00000000 | r03: 0x00000008 r04: 0xffffffff r05: 0x00000000 | r06: 0x00000000 r07: 0x00000000 r08: 0x00000087 | r09: 0x00000000 r10: 0x2010691c r11: 0x00000020 | r12: 0x2003b214 r13: 0x5ffff8a8 r14: 0x20126e68 | r15: 0x2001f26c r16: 0x2012a000 r17: 0x00000001 | r18: 0x5ffff8fc r19: 0x00000000 r20: 0x5ffff948 | r21: 0x00000001 r22: 0xffffffff r23: 0x5fffff8c | r24: 0x4008c2a8 r25: 0x2001f6e0 BTA: 0x2004aa18 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-03-11Merge tag 'for-linus-2020-03-10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull thread fix from Christian Brauner: "This contains a single fix for a regression which was introduced when we introduced the ability to select a specific pid at process creation time. When this feature is requested, the error value will be set to -EPERM after exiting the pid allocation loop. This caused EPERM to be returned when e.g. the init process/child subreaper of the pid namespace has already died where we used to return ENOMEM before. The first patch here simply fixes the regression by unconditionally setting the return value back to ENOMEM again once we've successfully allocated the requested pid number. This should be easy to backport to v5.5. The second patch adds a comment explaining that we must keep returning ENOMEM since we've been doing it for a long time and have explicitly documented this behavior for userspace. This seemed worthwhile because we now have at least two separate example where people tried to change the return value to something other than ENOMEM (The first version of the regression fix did that too and the commit message links to an earlier patch that tried to do the same.). I have a simple regression test to make sure we catch this regression in the future but since that introduces a whole new selftest subdir and test files I'll keep this for v5.7" * tag 'for-linus-2020-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: pid: make ENOMEM return value more obvious pid: Fix error return value in some cases
2020-03-11Merge tag 'trace-v5.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fix from Steven Rostedt: "Have ftrace lookup_rec() return a consistent record otherwise it can break live patching" * tag 'trace-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Return the first found result in lookup_rec()
2020-03-11Merge tag 'mips_fixes_5.6.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: "A few MIPS fixes: - DT fixes for CI20 - Fix command line handling - Correct patchwork URL" * tag 'mips_fixes_5.6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MAINTAINERS: Correct MIPS patchwork URL MIPS: DTS: CI20: fix interrupt for pcf8563 RTC MIPS: DTS: CI20: fix PMU definitions for ACT8600 MIPS: Fix CONFIG_MIPS_CMDLINE_DTB_EXTEND handling
2020-03-11Merge tag 'pinctrl-v5.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Some pin control fixes for the v5.6 series. It comes down to memory leaks in the core and driver fixes. Some should have been sent earlier but they kept piling up and the world is just so full of distractions these days. - Fix some inverted pins in the Meson GLX driver. - Align the i.MX SC message structs causing warnings from KASan. - Balance the kref in pinctrl hogs so they are actually free:d when removing a pin control module. We haven't seen it before as people don't use modules for pin control that much, I think. - Add a missing call to pinctrl_unregister_mappings() another memory leak when using modules. - Fix the fwspec parsing in the Qualcomm driver. - Fix a syntax error in the Falcon driver. - Assign .irq_eoi conditionally in the Qualcomm driver, fixing a bug affecting elder Qualcomm platforms" * tag 'pinctrl-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: Assign irq_eoi conditionally pinctrl: falcon: fix syntax error pinctrl: qcom: ssbi-gpio: Fix fwspec parsing bug pinctrl: madera: Add missing call to pinctrl_unregister_mappings pinctrl: core: Remove extra kref_get which blocks hogs being freed pinctrl: imx: scu: Align imx sc msg structs to 4 pinctrl: meson-gxl: fix GPIOX sdio pins
2020-03-11driver code: clarify and fix platform device DMA mask allocationChristoph Hellwig
This does three inter-related things to clarify the usage of the platform device dma_mask field. In the process, fix the bug introduced by cdfee5623290 ("driver core: initialize a default DMA mask for platform device") that caused Artem Tashkinov's laptop to not boot with newer Fedora kernels. This does: - First off, rename the field to "platform_dma_mask" to make it greppable. We have way too many different random fields called "dma_mask" in various data structures, where some of them are actual masks, and some of them are just pointers to the mask. And the structures all have pointers to each other, or embed each other inside themselves, and "pdev" sometimes means "platform device" and sometimes it means "PCI device". So to make it clear in the code when you actually use this new field, give it a unique name (it really should be something even more unique like "platform_device_dma_mask", since it's per platform device, not per platform, but that gets old really fast, and this is unique enough in context). To further clarify when the field gets used, initialize it when we actually start using it with the default value. - Then, use this field instead of the random one-off allocation in platform_device_register_full() that is now unnecessary since we now already have a perfectly fine allocation for it in the platform device structure. - The above then allows us to fix the actual bug, where the error path of platform_device_register_full() would unconditionally free the platform device DMA allocation with 'kfree()'. That kfree() was dont regardless of whether the allocation had been done earlier with the (now removed) kmalloc, or whether setup_pdev_dma_masks() had already been used and the dma_mask pointer pointed to the mask that was part of the platform device. It seems most people never triggered the error path, or only triggered it from a call chain that set an explicit pdevinfo->dma_mask value (and thus caused the unnecessary allocation that was "cleaned up" in the error path) before calling platform_device_register_full(). Robin Murphy points out that in Artem's case the wdat_wdt driver failed in platform_device_add(), and that was the one that had called platform_device_register_full() with pdevinfo.dma_mask = 0, and would have caused that kfree() of pdev.dma_mask corrupting the heap. A later unrelated kmalloc() then oopsed due to the heap corruption. Fixes: cdfee5623290 ("driver core: initialize a default DMA mask for platform device") Reported-bisected-and-tested-by: Artem S. Tashkinov <aros@gmx.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-11ARM: dts: sun8i: a33: add the new SS compatibleCorentin Labbe
Add the new A33 SS compatible to the crypto node. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2020-03-11mmc: sdhci-tegra: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSYUlf Hansson
It has turned out that the sdhci-tegra controller requires the R1B response, for commands that has this response associated with them. So, converting from an R1B to an R1 response for a CMD6 for example, leads to problems with the HW busy detection support. Fix this by informing the mmc core about the requirement, via setting the host cap, MMC_CAP_NEED_RSP_BUSY. Reported-by: Bitan Biswas <bbiswas@nvidia.com> Reported-by: Peter Geis <pgwipeout@gmail.com> Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com> Cc: <stable@vger.kernel.org> Tested-by: Sowjanya Komatineni <skomatineni@nvidia.com> Tested-By: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-11dt-bindings: crypto: add new compatible for A33 SSCorentin Labbe
The A33 SS has a difference with all other SS, it give SHA1 digest directly in BE. This difference need to be handlded by the driver and so need a new compatible. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2020-03-11mmc: sdhci-omap: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSYUlf Hansson
It has turned out that the sdhci-omap controller requires the R1B response, for commands that has this response associated with them. So, converting from an R1B to an R1 response for a CMD6 for example, leads to problems with the HW busy detection support. Fix this by informing the mmc core about the requirement, via setting the host cap, MMC_CAP_NEED_RSP_BUSY. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: Anders Roxell <anders.roxell@linaro.org> Reported-by: Faiz Abbas <faiz_abbas@ti.com> Cc: <stable@vger.kernel.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-11mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for erase/trim/discardUlf Hansson
The busy timeout that is computed for each erase/trim/discard operation, can become quite long and may thus exceed the host->max_busy_timeout. If that becomes the case, mmc_do_erase() converts from using an R1B response to an R1 response, as to prevent the host from doing HW busy detection. However, it has turned out that some hosts requires an R1B response no matter what, so let's respect that via checking MMC_CAP_NEED_RSP_BUSY. Note that, if the R1B gets enforced, the host becomes fully responsible of managing the needed busy timeout, in one way or the other. Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com> Cc: <stable@vger.kernel.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Sowjanya Komatineni <skomatineni@nvidia.com> Tested-by: Faiz Abbas <faiz_abbas@ti.com> Tested-By: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-11mmc: core: Allow host controllers to require R1B for CMD6Ulf Hansson
It has turned out that some host controllers can't use R1B for CMD6 and other commands that have R1B associated with them. Therefore invent a new host cap, MMC_CAP_NEED_RSP_BUSY to let them specify this. In __mmc_switch(), let's check the flag and use it to prevent R1B responses from being converted into R1. Note that, this also means that the host are on its own, when it comes to manage the busy timeout. Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com> Cc: <stable@vger.kernel.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Sowjanya Komatineni <skomatineni@nvidia.com> Tested-by: Faiz Abbas <faiz_abbas@ti.com> Tested-By: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-11gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 BYT + AXP288 modelHans de Goede
Commit aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism") was added to deal with spurious wakeups on one specific model of the HP x2 10 series. In the mean time I have learned that there are at least 3 different HP x2 10 models: Bay Trail SoC + AXP288 PMIC Cherry Trail SoC + AXP288 PMIC Cherry Trail SoC + TI PMIC And the original quirk is only correct for (and only matches the) Cherry Trail SoC + TI PMIC model. The Bay Trail SoC + AXP288 PMIC model has different DMI strings, has the external EC interrupt on a different GPIO pin and only needs to ignore wakeups on the EC interrupt, the INT0002 device works fine on this model. This commit adds an extra DMI based quirk for the HP x2 10 BYT + AXP288 model, ignoring wakeups for ACPI GPIO events on the EC interrupt pin on this model. This fixes spurious wakeups from suspend on this model. Fixes: aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200302111225.6641-3-hdegoede@redhat.com Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-11gpiolib: acpi: Rework honor_wakeup option into an ignore_wake optionHans de Goede
Commit aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism") was added to deal with spurious wakeups on one specific model of the HP x2 10 series. The approach taken there was to add a bool controlling wakeup support for all ACPI GPIO events. This was sufficient for the specific HP x2 10 model the commit was trying to fix, but in the mean time other models have turned up which need a similar workaround to avoid spurious wakeups from suspend, but only for one of the pins on which the ACPI tables request ACPI GPIO events. Since the honor_wakeup option was added to be able to ignore wake events, the name was perhaps not the best, this commit renames it to ignore_wake and changes it to a string with the following format: gpiolib_acpi.ignore_wake=controller@pin[,controller@pin[,...]] This allows working around spurious wakeup issues on a per pin basis. This commit also reworks the existing quirk for the HP x2 10 so that it functions as before. Note: -This removes the honor_wakeup parameter. This has only been upstream for a short time and to the best of my knowledge there are no users using this module parameter. -The controller@pin[,controller@pin[,...]] syntax is based on an existing kernel module parameter using the same controller@pin format. That version uses ';' as separator, but in practice that is problematic because grub2 cannot handle this without taking special care to escape the ';', so here we are using a ',' as separator instead which does not have this issue. Fixes: aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200302111225.6641-2-hdegoede@redhat.com Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-11gpiolib: acpi: Correct comment for HP x2 10 honor_wakeup quirkHans de Goede
Commit aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism") added a quirk for some models of the HP x2 10 series. There are 2 issues with the comment describing the quirk: 1) The comment claims the DMI quirk applies to all Cherry Trail based HP x2 10 models. In the mean time I have learned that there are at least 3 models of the HP x2 10 models: Bay Trail SoC + AXP288 PMIC Cherry Trail SoC + AXP288 PMIC Cherry Trail SoC + TI PMIC And this quirk's DMI matches only match the Cherry Trail SoC + TI PMIC SoC, which is good because we want a slightly different quirk for the others. This commit updates the comment to make it clear that the quirk is only for the Cherry Trail SoC + TI PMIC models. 2) The comment says that it is ok to disable wakeup on all ACPI GPIO event handlers, because there is only the one for the embedded-controller events. This is not true, there also is a handler for the special INT0002 device which is related to USB wakeups. We need to also disable wakeups on that one because the device turns of the USB-keyboard built into the dock when closing the lid. The XHCI controller takes a while to notice this, so it only notices it when already suspended, causing a spurious wakeup because of this. So disabling wakeup on all handlers is the right thing to do, but not because there only is the one handler for the EC events. This commit updates the comment to correctly reflect this. Fixes: aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200302111225.6641-1-hdegoede@redhat.com Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-11gpiolib: Fix irq_disable() semanticsLinus Walleij
The implementation if .irq_disable() which kicks in between the gpiolib and the driver is not properly mimicking the expected semantics of the irqchip core: the irqchip will call .irq_disable() if that exists, else it will call mask_irq() which first checks if .irq_mask() is defined before calling it. Since we are calling it unconditionally, we get this bug from drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c, as it only defines .irq_mask_ack and not .irq_mask: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = (ptrval) (...) PC is at 0x0 LR is at gpiochip_irq_disable+0x20/0x30 Fix this by only calling .irq_mask() if it exists. Cc: Brian Masney <masneyb@onstation.org> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Fixes: 461c1a7d4733 ("gpiolib: override irq_enable/disable") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200306132326.1329640-1-linus.walleij@linaro.org
2020-03-11x86/ioremap: Map EFI runtime services data as encrypted for SEVTom Lendacky
The dmidecode program fails to properly decode the SMBIOS data supplied by OVMF/UEFI when running in an SEV guest. The SMBIOS area, under SEV, is encrypted and resides in reserved memory that is marked as EFI runtime services data. As a result, when memremap() is attempted for the SMBIOS data, it can't be mapped as regular RAM (through try_ram_remap()) and, since the address isn't part of the iomem resources list, it isn't mapped encrypted through the fallback ioremap(). Add a new __ioremap_check_other() to deal with memory types like EFI_RUNTIME_SERVICES_DATA which are not covered by the resource ranges. This allows any runtime services data which has been created encrypted, to be mapped encrypted too. [ bp: Move functionality to a separate function. ] Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Joerg Roedel <jroedel@suse.de> Tested-by: Joerg Roedel <jroedel@suse.de> Cc: <stable@vger.kernel.org> # 5.3 Link: https://lkml.kernel.org/r/2d9e16eb5b53dc82665c95c6764b7407719df7a0.1582645327.git.thomas.lendacky@amd.com
2020-03-11ARM: dts: sun8i: r40: Move SPI device nodes based on address orderChen-Yu Tsai
When the SPI device nodes were added, they were added in the wrong location in the device tree file. The device nodes should be sorted by register address. Move the devices node to their correct positions within the file. Fixes: 554581b79139 ("ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes") Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2020-03-11ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3Chen-Yu Tsai
When the SPI device nodes were added, SPI2 and SPI3 had incorrect register base addresses. Fix the base address for both of them. Fixes: 554581b79139 ("ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes") Reported-by: JuanEsf <juanesf91@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2020-03-11ARM: dts: sun8i: r40: Move AHCI device node based on address orderChen-Yu Tsai
When the AHCI device node was added, it was added in the wrong location in the device tree file. The device nodes should be sorted by register address. Move the device node to before EHCI1, where it belongs. Fixes: 41c64d3318aa ("ARM: dts: sun8i: r40: add sata node") Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2020-03-11ftrace: Return the first found result in lookup_rec()Artem Savkov
It appears that ip ranges can overlap so. In that case lookup_rec() returns whatever results it got last even if it found nothing in last searched page. This breaks an obscure livepatch late module patching usecase: - load livepatch - load the patched module - unload livepatch - try to load livepatch again To fix this return from lookup_rec() as soon as it found the record containing searched-for ip. This used to be this way prior lookup_rec() introduction. Link: http://lkml.kernel.org/r/20200306174317.21699-1-asavkov@redhat.com Cc: stable@vger.kernel.org Fixes: 7e16f581a817 ("ftrace: Separate out functionality from ftrace_location_range()") Signed-off-by: Artem Savkov <asavkov@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-03-11bpf, sockmap: Remove bucket->lock from sock_{hash|map}_freeJohn Fastabend
The bucket->lock is not needed in the sock_hash_free and sock_map_free calls, in fact it is causing a splat due to being inside rcu block. | BUG: sleeping function called from invalid context at net/core/sock.c:2935 | in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 62, name: kworker/0:1 | 3 locks held by kworker/0:1/62: | #0: ffff88813b019748 ((wq_completion)events){+.+.}, at: process_one_work+0x1d7/0x5e0 | #1: ffffc900000abe50 ((work_completion)(&map->work)){+.+.}, at: process_one_work+0x1d7/0x5e0 | #2: ffff8881381f6df8 (&stab->lock){+...}, at: sock_map_free+0x26/0x180 | CPU: 0 PID: 62 Comm: kworker/0:1 Not tainted 5.5.0-04008-g7b083332376e #454 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 | Workqueue: events bpf_map_free_deferred | Call Trace: | dump_stack+0x71/0xa0 | ___might_sleep.cold+0xa6/0xb6 | lock_sock_nested+0x28/0x90 | sock_map_free+0x5f/0x180 | bpf_map_free_deferred+0x58/0x80 | process_one_work+0x260/0x5e0 | worker_thread+0x4d/0x3e0 | kthread+0x108/0x140 | ? process_one_work+0x5e0/0x5e0 | ? kthread_park+0x90/0x90 | ret_from_fork+0x3a/0x50 The reason we have stab->lock and bucket->locks in sockmap code is to handle checking EEXIST in update/delete cases. We need to be careful during an update operation that we check for EEXIST and we need to ensure that the psock object is not in some partial state of removal/insertion while we do this. So both map_update_common and sock_map_delete need to guard from being run together potentially deleting an entry we are checking, etc. But by the time we get to the tear-down code in sock_{ma[|hash}_free we have already disconnected the map and we just did synchronize_rcu() in the line above so no updates/deletes should be in flight. Because of this we can drop the bucket locks from the map free'ing code, noting no update/deletes can be in-flight. Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Reported-by: Jakub Sitnicki <jakub@cloudflare.com> Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/158385850787.30597.8346421465837046618.stgit@john-Precision-5820-Tower
2020-03-11HID: hid-sensor-custom: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-11HID: hid-picolcd_fb: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-11MAINTAINERS: rectify the INTEL IADX DRIVER entryLukas Bulwahn
Commit bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") added the INTEL IADX DRIVER entry in MAINTAINERS, which mentions include/linux/idxd.h as file entry. However, this header file was not added in this commit, nor in any later one. Hence, since then, ./scripts/get_maintainer.pl --self-test complains: warning: no file matches F: include/linux/idxd.h Drop the file entry to the non-existing file in INTEL IADX DRIVER now. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20200307205737.5829-1-lukas.bulwahn@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-11dmaengine: move .device_release missing log warning to debug levelVinod Koul
Dmaengine core warns the drivers registering for missing .device_release implementation. The warning is accurate for dmaengine controllers which hotplug but not for rest. So reduce this to a debug log. Link: https://lore.kernel.org/r/20200306135018.2286959-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-11ARM: dts: imx6: phycore-som: fix arm and soc minimum voltageMarco Felsch
The current set minimum voltage of 730000µV seems to be wrong. I don't know the document which specifies that but the imx6qdl datasheets says that the minimum voltage should be 0.925V for VDD_ARM (LDO bypassed, lowest opp) and 1.15V for VDD_SOC (LDO bypassed, lowest opp). Fixes: ddec5d1c0047 ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-11mac80211: Do not send mesh HWMP PREQ if HWMP is disabledNicolas Cavallari
When trying to transmit to an unknown destination, the mesh code would unconditionally transmit a HWMP PREQ even if HWMP is not the current path selection algorithm. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Link: https://lore.kernel.org/r/20200305140409.12204-1-cavallar@lri.fr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-11nl80211: add missing attribute validation for channel switchJakub Kicinski
Add missing attribute validation for NL80211_ATTR_OPER_CLASS to the netlink policy. Fixes: 1057d35ede5d ("cfg80211: introduce TDLS channel switch commands") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20200303051058.4089398-4-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-11nl80211: add missing attribute validation for beacon report scanningJakub Kicinski
Add missing attribute validation for beacon report scanning to the netlink policy. Fixes: 1d76250bd34a ("nl80211: support beacon report scanning") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20200303051058.4089398-3-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-11nl80211: add missing attribute validation for critical protocol indicationJakub Kicinski
Add missing attribute validation for critical protocol fields to the netlink policy. Fixes: 5de17984898c ("cfg80211: introduce critical protocol indication from user-space") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20200303051058.4089398-2-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-11KVM: s390: Also reset registers in sync regs for initial cpu resetChristian Borntraeger
When we do the initial CPU reset we must not only clear the registers in the internal data structures but also in kvm_run sync_regs. For modern userspace sync_regs is the only place that it looks at. Fixes: 7de3f1423ff9 ("KVM: s390: Add new reset vcpu API") Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-03-11staging: wfx: fix RCU usage between hif_join() and ieee80211_bss_get_ie()Jérôme Pouiller
Access to result of ieee80211_bss_get_ie() is protected by RCU. In other hand, function hif_join() can sleep and cannot be called with RCU locked. Provide a copy of "ssidie" to hif_join() to solve this behavior. Fixes: 9ced9b593741 ("staging: wfx: simplify hif_join()") Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200310101356.182818-6-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: wfx: fix RCU usage in wfx_join_finalize()Jérôme Pouiller
Access to sta->ht_cap is protected by RCU. However, hif_set_association_mode() may sleep, so it can't be called in RCU. This patch fix this behavior by handling sta and its RCU directly from function hif_set_association_mode(). Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Fixes: d00149011066 ("staging: wfx: fix RCU usage") Link: https://lore.kernel.org/r/20200310101356.182818-5-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: wfx: make warning about pending frame less scaryJérôme Pouiller
Removing station while some traffic is in progress may happen. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200310101356.182818-4-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: wfx: fix lines ending with a comma instead of a semicolonJérôme Pouiller
Obviously introduced by mistake. Fixes: 09779276f1ba ("staging: wfx: simplify hif_start() usage") Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200310101356.182818-3-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: wfx: fix warning about freeing in-use mutex during device unregisterJérôme Pouiller
After hif_shutdown(), communication with the chip is no more possible. It the only request that never reply. Therefore, hif_cmd.lock is never unlocked. hif_shutdown() unlock itself hif_cmd.lock to avoid a potential warning during disposal of device. hif_cmd.key_renew_lock should also been unlocked for the same reason. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200310101356.182818-2-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging/speakup: fix get_word non-space look-aheadSamuel Thibault
get_char was erroneously given the address of the pointer to the text instead of the address of the text, thus leading to random crashes when the user requests speaking a word while the current position is on a space character and say_word_ctl is not enabled. Reported-on: https://github.com/bytefire/speakup/issues/1 Reported-by: Kirk Reiser <kirk@reisers.ca> Reported-by: Janina Sajka <janina@rednote.net> Reported-by: Alexandr Epaneshnikov <aarnaarn2@gmail.com> Reported-by: Gregory Nowak <greg@gregn.net> Reported-by: deedra waters <deedra@the-brannons.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by: Alexandr Epaneshnikov <aarnaarn2@gmail.com> Tested-by: Gregory Nowak <greg@gregn.net> Tested-by: Michael Taboada <michael@michaels.world> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200306003047.thijtmqrnayd3dmw@function Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11ALSA: hda/realtek: Fix pop noise on ALC225Kai-Heng Feng
Commit 317d9313925c ("ALSA: hda/realtek - Set default power save node to 0") makes the ALC225 have pop noise on S3 resume and cold boot. So partially revert this commit for ALC225 to fix the regression. Fixes: 317d9313925c ("ALSA: hda/realtek - Set default power save node to 0") BugLink: https://bugs.launchpad.net/bugs/1866357 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200311061328.17614-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-03-10scsi: ipr: Fix softlockup when rescanning devices in petitbootWen Xiong
When trying to rescan disks in petitboot shell, we hit the following softlockup stacktrace: Kernel panic - not syncing: System is deadlocked on memory [ 241.223394] CPU: 32 PID: 693 Comm: sh Not tainted 5.4.16-openpower1 #1 [ 241.223406] Call Trace: [ 241.223415] [c0000003f07c3180] [c000000000493fc4] dump_stack+0xa4/0xd8 (unreliable) [ 241.223432] [c0000003f07c31c0] [c00000000007d4ac] panic+0x148/0x3cc [ 241.223446] [c0000003f07c3260] [c000000000114b10] out_of_memory+0x468/0x4c4 [ 241.223461] [c0000003f07c3300] [c0000000001472b0] __alloc_pages_slowpath+0x594/0x6d8 [ 241.223476] [c0000003f07c3420] [c00000000014757c] __alloc_pages_nodemask+0x188/0x1a4 [ 241.223492] [c0000003f07c34a0] [c000000000153e10] alloc_pages_current+0xcc/0xd8 [ 241.223508] [c0000003f07c34e0] [c0000000001577ac] alloc_slab_page+0x30/0x98 [ 241.223524] [c0000003f07c3520] [c0000000001597fc] new_slab+0x138/0x40c [ 241.223538] [c0000003f07c35f0] [c00000000015b204] ___slab_alloc+0x1e4/0x404 [ 241.223552] [c0000003f07c36c0] [c00000000015b450] __slab_alloc+0x2c/0x48 [ 241.223566] [c0000003f07c36f0] [c00000000015b754] kmem_cache_alloc_node+0x9c/0x1b4 [ 241.223582] [c0000003f07c3760] [c000000000218c48] blk_alloc_queue_node+0x34/0x270 [ 241.223599] [c0000003f07c37b0] [c000000000226574] blk_mq_init_queue+0x2c/0x78 [ 241.223615] [c0000003f07c37e0] [c0000000002ff710] scsi_mq_alloc_queue+0x28/0x70 [ 241.223631] [c0000003f07c3810] [c0000000003005b8] scsi_alloc_sdev+0x184/0x264 [ 241.223647] [c0000003f07c38a0] [c000000000300ba0] scsi_probe_and_add_lun+0x288/0xa3c [ 241.223663] [c0000003f07c3a00] [c000000000301768] __scsi_scan_target+0xcc/0x478 [ 241.223679] [c0000003f07c3b20] [c000000000301c64] scsi_scan_channel.part.9+0x74/0x7c [ 241.223696] [c0000003f07c3b70] [c000000000301df4] scsi_scan_host_selected+0xe0/0x158 [ 241.223712] [c0000003f07c3bd0] [c000000000303f04] store_scan+0x104/0x114 [ 241.223727] [c0000003f07c3cb0] [c0000000002d5ac4] dev_attr_store+0x30/0x4c [ 241.223741] [c0000003f07c3cd0] [c0000000001dbc34] sysfs_kf_write+0x64/0x78 [ 241.223756] [c0000003f07c3cf0] [c0000000001da858] kernfs_fop_write+0x170/0x1b8 [ 241.223773] [c0000003f07c3d40] [c0000000001621fc] __vfs_write+0x34/0x60 [ 241.223787] [c0000003f07c3d60] [c000000000163c2c] vfs_write+0xa8/0xcc [ 241.223802] [c0000003f07c3db0] [c000000000163df4] ksys_write+0x70/0xbc [ 241.223816] [c0000003f07c3e20] [c00000000000b40c] system_call+0x5c/0x68 As a part of the scan process Linux will allocate and configure a scsi_device for each target to be scanned. If the device is not present, then the scsi_device is torn down. As a part of scsi_device teardown a workqueue item will be scheduled and the lockups we see are because there are 250k workqueue items to be processed. Accoding to the specification of SIS-64 sas controller, max_channel should be decreased on SIS-64 adapters to 4. The patch fixes softlockup issue. Thanks for Oliver Halloran's help with debugging and explanation! Link: https://lore.kernel.org/r/1583510248-23672-1-git-send-email-wenxiong@linux.vnet.ibm.com Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-12 14:50:05 +0000