summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-06-09netvsc: pass net_device to netvsc_init_buf and netvsc_connect_vspstephen hemminger
Don't need to find netvsc_device structure, caller already had it. Also rearrange declarations. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09netvsc: mark error cases as unlikelystephen hemminger
Mark if() statements used for error handling only as unlikely() Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09netvsc: use typed pointer for internal statestephen hemminger
The element netvsc_device:extension is always a pointer to RNDIS information. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09netvsc: use hv_get_bytes_to_readstephen hemminger
Don't need need to look at write space in netvsc_close. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09netvsc: optimize calculation of number of slotsstephen hemminger
Speed up transmit check for fragmented packets by using existing macros to compute number of pages, and eliminate loop since skb fragments each take a page. Number of slots is also unsigned. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09Merge branch 'dsa-mv88e6xxx-ops-cosmetics'David S. Miller
Vivien Didelot says: ==================== net: dsa: mv88e6xxx: ops cosmetics This patchset brings no functional changes. It is a first step in a bigger cosmetics change to the driver. It simplifies print messages and polishes data types and chip operations. The next patchs will only prefix and document the port registers macros. Changes in v2: - KISS and simply use dev_* since chip->ds may not be initialized - add reviewers tags ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09net: dsa: mv88e6xxx: prefix PHY macrosVivien Didelot
Prefix the PHY_* macros with a Marvell specific MV88E6XXX_ prefix. There is no functional changes. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09net: dsa: mv88e6xxx: rework jumbo size operationVivien Didelot
Marvell chips have a Jumbo Mode to set the maximum frame size (MTU). The mv88e6xxx_ops structure is meant to contain generic functionalities, no driver logic. Change port_jumbo_config to port_set_jumbo_size setting the mode from a given maximum size value. There is no functional changes since we still use 10240 bytes. At the same time, correctly clear all Jumbo Mode bits before writing. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09net: dsa: mv88e6xxx: rework pause limit operationVivien Didelot
All Marvell chips supporting Pause frames limiting use 1-byte value for input and output. Old chips have both bytes adjacent in a 16-bit register. New ones have an indirect table using 8-bit data. The mv88e6xxx library functions (such as in port.c) must not contain driver logic, but only generic helpers. This patch changes the port_pause_config operation for port_pause_limit taking two u8 arguments for input and output limits. There is no functional changes. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09net: dsa: mv88e6xxx: do not prefix ops with g1Vivien Didelot
The mv88e6xxx_ops describe functionalities, regardless their locations (which can be Global1, Global2, or whatever register set.) Rename the g1_set_cpu_port and g1_set_egress_port ops to set_cpu_port and set_egress_port. No functional changes. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09net: dsa: mv88e6xxx: use bridge state valuesVivien Didelot
Reuse the BR_STATE_* values to abstract a port STP state value. This provides shorter names and better control over the DSA switch operation call. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09net: dsa: mv88e6xxx: add egress mode enumerationVivien Didelot
As for the frame mode, add a mv88e6xxx_egress_mode enumeration instead of a 16-bit register mask. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09net: dsa: mv888e6xxx: do not use netdev printingVivien Didelot
The mv888e6xxx driver accesses a port's netdev mostly for printing. This is bad for 2 reasons: DSA and CPU ports do not have a netdev pointer; it doesn't give us a correct picture of why a DSA driver might need to access a port's netdev. Instead simply use dev_* printing functions with chip->dev (or ds->dev depending on the scope, both guaranteed to exist), with a p%d prefix for the target port. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09device-dax: fix 'dax' device filesystem inode destruction crashDan Williams
The inode destruction path for the 'dax' device filesystem incorrectly assumes that the inode was initialized through 'alloc_dax()'. However, if someone attempts to directly mount the dax filesystem with 'mount -t dax dax mnt' that will bypass 'alloc_dax()' and the following failure signatures may occur as a result: kill_dax() must be called before final iput() WARNING: CPU: 2 PID: 1188 at drivers/dax/super.c:243 dax_destroy_inode+0x48/0x50 RIP: 0010:dax_destroy_inode+0x48/0x50 Call Trace: destroy_inode+0x3b/0x60 evict+0x139/0x1c0 iput+0x1f9/0x2d0 dentry_unlink_inode+0xc3/0x160 __dentry_kill+0xcf/0x180 ? dput+0x37/0x3b0 dput+0x3a3/0x3b0 do_one_tree+0x36/0x40 shrink_dcache_for_umount+0x2d/0x90 generic_shutdown_super+0x1f/0x120 kill_anon_super+0x12/0x20 deactivate_locked_super+0x43/0x70 deactivate_super+0x4e/0x60 general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC RIP: 0010:kfree+0x6d/0x290 Call Trace: <IRQ> dax_i_callback+0x22/0x60 ? dax_destroy_inode+0x50/0x50 rcu_process_callbacks+0x298/0x740 ida_remove called for id=0 which is not allocated. WARNING: CPU: 0 PID: 0 at lib/idr.c:383 ida_remove+0x110/0x120 [..] Call Trace: <IRQ> ida_simple_remove+0x2b/0x50 ? dax_destroy_inode+0x50/0x50 dax_i_callback+0x3c/0x60 rcu_process_callbacks+0x298/0x740 Add missing initialization of the 'struct dax_device' and inode so that the destruction path does not kfree() or ida_simple_remove() uninitialized data. Fixes: 7b6be8444e0f ("dax: refactor dax-fs into a generic provider of 'struct dax_device' instances") Reported-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-09af_unix: Add sockaddr length checks before accessing sa_family in bind and ↵Mateusz Jurczyk
connect handlers Verify that the caller-provided sockaddr structure is large enough to contain the sa_family field, before accessing it in bind() and connect() handlers of the AF_UNIX socket. Since neither syscall enforces a minimum size of the corresponding memory region, very short sockaddrs (zero or one byte long) result in operating on uninitialized memory while referencing .sa_family. Signed-off-by: Mateusz Jurczyk <mjurczyk@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09batman-adv: simplify return handling in some TT functionsSimon Wunderlich
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2017-06-09batman-adv: do not add loop detection mac addresses to global ttSimon Wunderlich
This change has been made for local TT already, add another one for global TT - but only for temporary entries (aka speedy join), to prevent inconsistencies between local and global tables in case an older batman-adv version is still announcing those entries from its local table. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2017-06-09batman-adv: tp_meter: mark init function with __initAntonio Quartulli
batadv_tp_meter_init() is invoked in batadv_init() only which is marked with __init. For this reason batadv_tp_meter_init() can be marked with __init as well and dropped after module load. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-06-09net: phy: add missing SPEED_14000Joe Perches
Fixes: 0d7e2d2166f6 ("IB/ipoib: add get_link_ksettings in ethtool") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09USB: gadget: fix GPF in gadgetfsAlan Stern
A NULL-pointer dereference bug in gadgetfs was uncovered by syzkaller: > kasan: GPF could be caused by NULL-ptr deref or user memory access > general protection fault: 0000 [#1] SMP KASAN > Dumping ftrace buffer: > (ftrace buffer empty) > Modules linked in: > CPU: 2 PID: 4820 Comm: syz-executor0 Not tainted 4.12.0-rc4+ #5 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 > task: ffff880039542dc0 task.stack: ffff88003bdd0000 > RIP: 0010:__list_del_entry_valid+0x7e/0x170 lib/list_debug.c:51 > RSP: 0018:ffff88003bdd6e50 EFLAGS: 00010246 > RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000010000 > RDX: 0000000000000000 RSI: ffffffff86504948 RDI: ffffffff86504950 > RBP: ffff88003bdd6e68 R08: ffff880039542dc0 R09: ffffffff8778ce00 > R10: ffff88003bdd6e68 R11: dffffc0000000000 R12: 0000000000000000 > R13: dffffc0000000000 R14: 1ffff100077badd2 R15: ffffffff864d2e40 > FS: 0000000000000000(0000) GS:ffff88006dc00000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 000000002014aff9 CR3: 0000000006022000 CR4: 00000000000006e0 > Call Trace: > __list_del_entry include/linux/list.h:116 [inline] > list_del include/linux/list.h:124 [inline] > usb_gadget_unregister_driver+0x166/0x4c0 drivers/usb/gadget/udc/core.c:1387 > dev_release+0x80/0x160 drivers/usb/gadget/legacy/inode.c:1187 > __fput+0x332/0x7f0 fs/file_table.c:209 > ____fput+0x15/0x20 fs/file_table.c:245 > task_work_run+0x19b/0x270 kernel/task_work.c:116 > exit_task_work include/linux/task_work.h:21 [inline] > do_exit+0x18a3/0x2820 kernel/exit.c:878 > do_group_exit+0x149/0x420 kernel/exit.c:982 > get_signal+0x77f/0x1780 kernel/signal.c:2318 > do_signal+0xd2/0x2130 arch/x86/kernel/signal.c:808 > exit_to_usermode_loop+0x1a7/0x240 arch/x86/entry/common.c:157 > prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] > syscall_return_slowpath+0x3ba/0x410 arch/x86/entry/common.c:263 > entry_SYSCALL_64_fastpath+0xbc/0xbe > RIP: 0033:0x4461f9 > RSP: 002b:00007fdac2b1ecf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca > RAX: fffffffffffffe00 RBX: 00000000007080c8 RCX: 00000000004461f9 > RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000007080c8 > RBP: 00000000007080a8 R08: 0000000000000000 R09: 0000000000000000 > R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 > R13: 0000000000000000 R14: 00007fdac2b1f9c0 R15: 00007fdac2b1f700 > Code: 00 00 00 00 ad de 49 39 c4 74 6a 48 b8 00 02 00 00 00 00 ad de > 48 89 da 48 39 c3 74 74 48 c1 ea 03 48 b8 00 00 00 00 00 fc ff df <80> > 3c 02 00 0f 85 92 00 00 00 48 8b 13 48 39 f2 75 66 49 8d 7c > RIP: __list_del_entry_valid+0x7e/0x170 lib/list_debug.c:51 RSP: ffff88003bdd6e50 > ---[ end trace 30e94b1eec4831c8 ]--- > Kernel panic - not syncing: Fatal exception The bug was caused by dev_release() failing to turn off its gadget_registered flag after unregistering the gadget driver. As a result, when a later user closed the device file before writing a valid set of descriptors, dev_release() thought the gadget had been registered and tried to unregister it, even though it had not been. This led to the NULL pointer dereference. The fix is simple: turn off the flag when the gadget is unregistered. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Andrey Konovalov <andreyknvl@google.com> CC: <stable@vger.kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-06-09efi: Fix boot panic because of invalid BGRT image addressDave Young
Maniaxx reported a kernel boot crash in the EFI code, which I emulated by using same invalid phys addr in code: BUG: unable to handle kernel paging request at ffffffffff280001 IP: efi_bgrt_init+0xfb/0x153 ... Call Trace: ? bgrt_init+0xbc/0xbc acpi_parse_bgrt+0xe/0x12 acpi_table_parse+0x89/0xb8 acpi_boot_init+0x445/0x4e2 ? acpi_parse_x2apic+0x79/0x79 ? dmi_ignore_irq0_timer_override+0x33/0x33 setup_arch+0xb63/0xc82 ? early_idt_handler_array+0x120/0x120 start_kernel+0xb7/0x443 ? early_idt_handler_array+0x120/0x120 x86_64_start_reservations+0x29/0x2b x86_64_start_kernel+0x154/0x177 secondary_startup_64+0x9f/0x9f There is also a similar bug filed in bugzilla.kernel.org: https://bugzilla.kernel.org/show_bug.cgi?id=195633 The crash is caused by this commit: 7b0a911478c7 efi/x86: Move the EFI BGRT init code to early init code The root cause is the firmware on those machines provides invalid BGRT image addresses. In a kernel before above commit BGRT initializes late and uses ioremap() to map the image address. Ioremap validates the address, if it is not a valid physical address ioremap() just fails and returns. However in current kernel EFI BGRT initializes early and uses early_memremap() which does not validate the image address, and kernel panic happens. According to ACPI spec the BGRT image address should fall into EFI_BOOT_SERVICES_DATA, see the section 5.2.22.4 of below document: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf Fix this issue by validating the image address in efi_bgrt_init(). If the image address does not fall into any EFI_BOOT_SERVICES_DATA areas we just bail out with a warning message. Reported-by: Maniaxx <tripleshiftone@gmail.com> Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code") Link: http://lkml.kernel.org/r/20170609084558.26766-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-09can: enable CAN FD for virtual CAN devices by defaultOliver Hartkopp
CAN FD capable CAN interfaces can handle (classic) CAN 2.0 frames too. New users usually fail at their first attempt to explore CAN FD on virtual CAN interfaces due to the current CAN_MTU default. Set the MTU to CANFD_MTU by default to reduce this confusion. If someone *really* needs a 'classic CAN'-only device this can be set with the 'ip' tool with e.g. 'ip link set vcan0 mtu 16' as before. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-06-09can: af_can: namespace support: fix lockdep splat: properly initialize spin_lockMarc Kleine-Budde
This patch uses spin_lock_init() instead of __SPIN_LOCK_UNLOCKED() to initialize the per namespace net->can.can_rcvlists_lock lock to fix this lockdep warning: | INFO: trying to register non-static key. | the code is fine but needs lockdep annotation. | turning off the locking correctness validator. | CPU: 0 PID: 186 Comm: candump Not tainted 4.12.0-rc3+ #47 | Hardware name: Marvell Kirkwood (Flattened Device Tree) | [<c0016644>] (unwind_backtrace) from [<c00139a8>] (show_stack+0x18/0x1c) | [<c00139a8>] (show_stack) from [<c0058c8c>] (register_lock_class+0x1e4/0x55c) | [<c0058c8c>] (register_lock_class) from [<c005bdfc>] (__lock_acquire+0x148/0x1990) | [<c005bdfc>] (__lock_acquire) from [<c005deec>] (lock_acquire+0x174/0x210) | [<c005deec>] (lock_acquire) from [<c04a6780>] (_raw_spin_lock+0x50/0x88) | [<c04a6780>] (_raw_spin_lock) from [<bf02116c>] (can_rx_register+0x94/0x15c [can]) | [<bf02116c>] (can_rx_register [can]) from [<bf02a868>] (raw_enable_filters+0x60/0xc0 [can_raw]) | [<bf02a868>] (raw_enable_filters [can_raw]) from [<bf02ac14>] (raw_enable_allfilters+0x2c/0xa0 [can_raw]) | [<bf02ac14>] (raw_enable_allfilters [can_raw]) from [<bf02ad38>] (raw_bind+0xb0/0x250 [can_raw]) | [<bf02ad38>] (raw_bind [can_raw]) from [<c03b5fb8>] (SyS_bind+0x70/0xac) | [<c03b5fb8>] (SyS_bind) from [<c000f8c0>] (ret_fast_syscall+0x0/0x1c) Cc: Mario Kicherer <dev@kicherer.org> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-06-09can: gs_usb: fix memory leak in gs_cmd_reset()Marc Kleine-Budde
This patch adds the missing kfree() in gs_cmd_reset() to free the memory that is not used anymore after usb_control_msg(). Cc: linux-stable <stable@vger.kernel.org> Cc: Maximilian Schneider <max@schneidersoft.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-06-09can: peak_usb: fix product-id endianness in error messageJohan Hovold
Make sure to use the USB device product-id stored in host-byte order in a probe error message. Also remove a redundant reassignment of the local usb_dev variable which had already been used to retrieve the product id. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-06-09can: peak_canfd: fix uninitialized symbol warningsStephane Grosjean
This patch fixes two uninitialized symbol warnings in the new code adding support of the PEAK-System PCAN-PCI Express FD boards, in the socket-CAN network protocol family. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-06-09can: dev: make can_change_state() robust to be called with cf == NULLMarc Kleine-Budde
In OOM situations where no skb can be allocated, can_change_state() may be called with cf == NULL. As this function updates the state and error statistics it's not an option to skip the call to can_change_state() in OOM situations. This patch makes can_change_state() robust, so that it can be called with cf == NULL. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-06-09cxl: Avoid double free_irq() for psl,slice interruptsVaibhav Jain
During an eeh call to cxl_remove can result in double free_irq of psl,slice interrupts. This can happen if perst_reloads_same_image == 1 and call to cxl_configure_adapter() fails during slot_reset callback. In such a case we see a kernel oops with following back-trace: Oops: Kernel access of bad area, sig: 11 [#1] Call Trace: free_irq+0x88/0xd0 (unreliable) cxl_unmap_irq+0x20/0x40 [cxl] cxl_native_release_psl_irq+0x78/0xd8 [cxl] pci_deconfigure_afu+0xac/0x110 [cxl] cxl_remove+0x104/0x210 [cxl] pci_device_remove+0x6c/0x110 device_release_driver_internal+0x204/0x2e0 pci_stop_bus_device+0xa0/0xd0 pci_stop_and_remove_bus_device+0x28/0x40 pci_hp_remove_devices+0xb0/0x150 pci_hp_remove_devices+0x68/0x150 eeh_handle_normal_event+0x140/0x580 eeh_handle_event+0x174/0x360 eeh_event_handler+0x1e8/0x1f0 This patch fixes the issue of double free_irq by checking that variables that hold the virqs (err_hwirq, serr_hwirq, psl_virq) are not '0' before un-mapping and resetting these variables to '0' when they are un-mapped. Cc: stable@vger.kernel.org Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09pinctrl: stm32: Fix bad function callAlexandre TORGUE
In stm32_pconf_parse_conf function, stm32_pmx_gpio_set_direction is called with wrong parameter value. Indeed, using NULL value for range will raise an oops. Fixes: aceb16dc2da5 ("pinctrl: Add STM32 MCUs support") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09pinctrl/amd: Use regular interrupt instead of chainedThomas Gleixner
The AMD pinctrl driver uses a chained interrupt to demultiplex the GPIO interrupts. Kevin Vandeventer reported, that his new AMD Ryzen locks up hard on boot when the AMD pinctrl driver is initialized. The reason is an interrupt storm. It's not clear whether that's caused by hardware or firmware or both. Using chained interrupts on X86 is a dangerous endavour. If a system is misconfigured or the hardware buggy there is no safety net to catch an interrupt storm. Convert the driver to use a regular interrupt for the demultiplex handler. This allows the interrupt storm detector to catch the malfunction and lets the system boot up. This should be backported to stable because it's likely that more users run into this problem as the AMD Ryzen machines are spreading. Reported-by: Kevin Vandeventer Link: https://bugzilla.suse.com/show_bug.cgi?id=1034261 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09gpio: mvebu: fix gpio bank registration when pwm is usedRichard Genoud
If more than one gpio bank has the "pwm" property, only one will be registered successfully, all the others will fail with: mvebu-gpio: probe of f1018140.gpio failed with error -17 That's because in alloc_pwms(), the chip->base (aka "int pwm"), was not set (thus, ==0) ; and 0 is a meaningful start value in alloc_pwm(). What was intended is mvpwm->chip->base = -1. Like that, the numbering will be done auto-magically Moreover, as the region might be already occupied by another pwm, we shouldn't force: mvpwm->chip->base = 0 nor mvpwm->chip->base = id * MVEBU_MAX_GPIO_PER_BANK; Tested on clearfog-pro (Marvell 88F6828) Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09gpio: mvebu: fix blink counter register selectionRichard Genoud
The blink counter A was always selected because 0 was forced in the blink select counter register. The variable 'set' was obviously there to be used as the register value, selecting the B counter when id==1 and A counter when id==0. Tested on clearfog-pro (Marvell 88F6828) Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09Merge branch 'rcu/urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into rcu/urgent Pull RCU fix from Paul E. McKenney: " This series enables srcu_read_lock() and srcu_read_unlock() to be used from interrupt handlers, which fixes a bug in KVM's use of SRCU in delivery of interrupts to guest OSes. " Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-09arm64: dts: hikey: Add external clock to the Bluetooth nodeUlf Hansson
To make the TI WiLink chip work again for Bluetooth, let's add the missing external clock to the Bluetooth node, such the driver can deal properly with it during power on/off. Fixes: ea452678734e ("arm64: dts: hikey: Fix WiFi support") Cc: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-06-09Bluetooth: hci_ll: Add support for the external clockUlf Hansson
Add support to manage the external clock provided to the WiLink combo chip as it's needed for any of the transport interfaces. To avoid breaking platforms not yet specifying the external clock, we make it optional. In case the clock is successfully fetched during ->probe(), let's manage it via the ->open|close() callbacks, to make sure the device get properly powered on/off. Fixes: ea452678734e ("arm64: dts: hikey: Fix WiFi support") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-06-09dt-bindings: net: Add binding for the external clock for TI WiLinkUlf Hansson
The external clock is provided to the TI WiLink combo chip and it's needed for any of the transport interfaces. However let's make it optional to avoid breaking existing platforms that yet doesn't specify the clock. Fixes: ea452678734e ("arm64: dts: hikey: Fix WiFi support") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-06-09Bluetooth: hci_ll: Add compatible values for more WL chipsSebastian Reichel
Add compatible values for WiLink chips from 128x and 180x series. Also the DT binding already contained compatible values for the 127x series, but the driver did not. This brings the list on par with the list from wlcore (the wifi driver). Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-06-09KEYS: fix refcount_inc() on zeroMark Rutland
If a key's refcount is dropped to zero between key_lookup() peeking at the refcount and subsequently attempting to increment it, refcount_inc() will see a zero refcount. Here, refcount_inc() will WARN_ONCE(), and will *not* increment the refcount, which will remain zero. Once key_lookup() drops key_serial_lock, it is possible for the key to be freed behind our back. This patch uses refcount_inc_not_zero() to perform the peek and increment atomically. Fixes: fff292914d3a2f1e ("security, keys: convert key.usage from atomic_t to refcount_t") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: David Windsor <dwindsor@gmail.com> Cc: Elena Reshetova <elena.reshetova@intel.com> Cc: Hans Liljestrand <ishkamiel@gmail.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: Convert KEYCTL_DH_COMPUTE to use the crypto KPP APIMat Martineau
The initial Diffie-Hellman computation made direct use of the MPI library because the crypto module did not support DH at the time. Now that KPP is implemented, KEYCTL_DH_COMPUTE should use it to get rid of duplicate code and leverage possible hardware acceleration. This fixes an issue whereby the input to the KDF computation would include additional uninitialized memory when the result of the Diffie-Hellman computation was shorter than the input prime number. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09crypto : asymmetric_keys : verify_pefile:zero memory content before freeingLoganaden Velvindron
Signed-off-by: Loganaden Velvindron <logan@hackers.mu> Signed-off-by: Yasir Auleear <yasirmx@hackers.mu> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: DH: add __user annotations to keyctl_kdf_paramsEric Biggers
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: DH: ensure the KDF counter is properly alignedEric Biggers
Accessing a 'u8[4]' through a '__be32 *' violates alignment rules. Just make the counter a __be32 instead. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: DH: don't feed uninitialized "otherinfo" into KDFEric Biggers
If userspace called KEYCTL_DH_COMPUTE with kdf_params containing NULL otherinfo but nonzero otherinfolen, the kernel would allocate a buffer for the otherinfo, then feed it into the KDF without initializing it. Fix this by always doing the copy from userspace (which will fail with EFAULT in this scenario). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: DH: forbid using digest_null as the KDF hashEric Biggers
Requesting "digest_null" in the keyctl_kdf_params caused an infinite loop in kdf_ctr() because the "null" hash has a digest size of 0. Fix it by rejecting hash algorithms with a digest size of 0. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: sanitize key structs before freeingEric Biggers
While a 'struct key' itself normally does not contain sensitive information, Documentation/security/keys.txt actually encourages this: "Having a payload is not required; and the payload can, in fact, just be a value stored in the struct key itself." In case someone has taken this advice, or will take this advice in the future, zero the key structure before freeing it. We might as well, and as a bonus this could make it a bit more difficult for an adversary to determine which keys have recently been in use. This is safe because the key_jar cache does not use a constructor. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: trusted: sanitize all key materialEric Biggers
As the previous patch did for encrypted-keys, zero sensitive any potentially sensitive data related to the "trusted" key type before it is freed. Notably, we were not zeroing the tpm_buf structures in which the actual key is stored for TPM seal and unseal, nor were we zeroing the trusted_key_payload in certain error paths. Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: David Safford <safford@us.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: encrypted: sanitize all key materialEric Biggers
For keys of type "encrypted", consistently zero sensitive key material before freeing it. This was already being done for the decrypted payloads of encrypted keys, but not for the master key and the keys derived from the master key. Out of an abundance of caution and because it is trivial to do so, also zero buffers containing the key payload in encrypted form, although depending on how the encrypted-keys feature is used such information does not necessarily need to be kept secret. Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: David Safford <safford@us.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: user_defined: sanitize key payloadsEric Biggers
Zero the payloads of user and logon keys before freeing them. This prevents sensitive key material from being kept around in the slab caches after a key is released. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: sanitize add_key() and keyctl() key payloadsEric Biggers
Before returning from add_key() or one of the keyctl() commands that takes in a key payload, zero the temporary buffer that was allocated to hold the key payload copied from userspace. This may contain sensitive key material that should not be kept around in the slab caches. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: fix freeing uninitialized memory in key_update()Eric Biggers
key_update() freed the key_preparsed_payload even if it was not initialized first. This would cause a crash if userspace called keyctl_update() on a key with type like "asymmetric" that has a ->preparse() method but not an ->update() method. Possibly it could even be triggered for other key types by racing with keyctl_setperm() to make the KEY_NEED_WRITE check fail (the permission was already checked, so normally it wouldn't fail there). Reproducer with key type "asymmetric", given a valid cert.der: keyctl new_session keyid=$(keyctl padd asymmetric desc @s < cert.der) keyctl setperm $keyid 0x3f000000 keyctl update $keyid data [ 150.686666] BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 [ 150.687601] IP: asymmetric_key_free_kids+0x12/0x30 [ 150.688139] PGD 38a3d067 [ 150.688141] PUD 3b3de067 [ 150.688447] PMD 0 [ 150.688745] [ 150.689160] Oops: 0000 [#1] SMP [ 150.689455] Modules linked in: [ 150.689769] CPU: 1 PID: 2478 Comm: keyctl Not tainted 4.11.0-rc4-xfstests-00187-ga9f6b6b8cd2f #742 [ 150.690916] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 [ 150.692199] task: ffff88003b30c480 task.stack: ffffc90000350000 [ 150.692952] RIP: 0010:asymmetric_key_free_kids+0x12/0x30 [ 150.693556] RSP: 0018:ffffc90000353e58 EFLAGS: 00010202 [ 150.694142] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000004 [ 150.694845] RDX: ffffffff81ee3920 RSI: ffff88003d4b0700 RDI: 0000000000000001 [ 150.697569] RBP: ffffc90000353e60 R08: ffff88003d5d2140 R09: 0000000000000000 [ 150.702483] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 150.707393] R13: 0000000000000004 R14: ffff880038a4d2d8 R15: 000000000040411f [ 150.709720] FS: 00007fcbcee35700(0000) GS:ffff88003fd00000(0000) knlGS:0000000000000000 [ 150.711504] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 150.712733] CR2: 0000000000000001 CR3: 0000000039eab000 CR4: 00000000003406e0 [ 150.714487] Call Trace: [ 150.714975] asymmetric_key_free_preparse+0x2f/0x40 [ 150.715907] key_update+0xf7/0x140 [ 150.716560] ? key_default_cmp+0x20/0x20 [ 150.717319] keyctl_update_key+0xb0/0xe0 [ 150.718066] SyS_keyctl+0x109/0x130 [ 150.718663] entry_SYSCALL_64_fastpath+0x1f/0xc2 [ 150.719440] RIP: 0033:0x7fcbce75ff19 [ 150.719926] RSP: 002b:00007ffd5d167088 EFLAGS: 00000206 ORIG_RAX: 00000000000000fa [ 150.720918] RAX: ffffffffffffffda RBX: 0000000000404d80 RCX: 00007fcbce75ff19 [ 150.721874] RDX: 00007ffd5d16785e RSI: 000000002866cd36 RDI: 0000000000000002 [ 150.722827] RBP: 0000000000000006 R08: 000000002866cd36 R09: 00007ffd5d16785e [ 150.723781] R10: 0000000000000004 R11: 0000000000000206 R12: 0000000000404d80 [ 150.724650] R13: 00007ffd5d16784d R14: 00007ffd5d167238 R15: 000000000040411f [ 150.725447] Code: 83 c4 08 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 85 ff 74 23 55 48 89 e5 53 48 89 fb <48> 8b 3f e8 06 21 c5 ff 48 8b 7b 08 e8 fd 20 c5 ff 48 89 df e8 [ 150.727489] RIP: asymmetric_key_free_kids+0x12/0x30 RSP: ffffc90000353e58 [ 150.728117] CR2: 0000000000000001 [ 150.728430] ---[ end trace f7f8fe1da2d5ae8d ]--- Fixes: 4d8c0250b841 ("KEYS: Call ->free_preparse() even after ->preparse() returns an error") Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-15 12:08:43 +0000