summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-07-21ixgbe/igb: catch invalid VF settingsAndy Gospodarek
Some ixgbe cards put an invalid VF device ID in the PCIe SR-IOV capability. The ixgbe driver is only valid for PFs or non SR-IOV hardware. It seems that the same problem could occur on igb hardware as well, so if we discover we are trying to initialize a VF in ixbge_probe or igb_probe, print an error and exit. Based on a patch for ixgbe from Chris Wright <chrisw@sous-sol.org>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Cc: Chris Wright <chrisw@sous-sol.org> Acked-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-21mac80211: proper IBSS lockingJohannes Berg
IBSS has never had locking, instead relying on some memory barriers etc. That's hard to get right, and I think we had it wrong too until the previous patch. Since this is not performance sensitive, it doesn't make sense to have the maintenance overhead of that, so add proper locking. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-21mac80211: fix IBSS lockdep complaintJohannes Berg
Bob reported a lockdep complaint originating in the mac80211 IBSS code due to the common work struct patch. The reason is that the IBSS and station mode code have different locking orders for the cfg80211 wdev lock and the work struct (where "locking" implies running/canceling). Fix this by simply not canceling the work in the IBSS code, it is not necessary since when the REQ_RUN bit is cleared, the work will run without effect if it runs. When the interface is set down, it is flushed anyway, so there's no concern about it running after memory has been invalidated either. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=16419 Additionally, looking into this I noticed that there's a small window while the IBSS is torn down in which the work may be rescheduled and the REQ_RUN bit be set again after leave() has cleared it when a scan finishes at exactly the same time. Avoid that by setting the ssid_len to zero before clearing REQ_RUN which signals to the scan finish code that this interface is not active. Reported-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-21mac80211: refuse shared key auth when WEP is unavailableJohannes Berg
When WEP is not available, we should reject shared key authentication because it could never succeed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-21cfg80211: fix race between sysfs and cfg80211Maxime Bizon
device_add() is called before adding the phy to the cfg80211 device list. So if a userspace program uses sysfs uevents to detect new phy devices, and queries nl80211 to get phy info, it can get ENODEV even though the phy exists in sysfs. An easy workaround is to hold the cfg80211 mutex until the phy is present in sysfs/cfg80211/debugfs. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-21b43: silence phy_n sparse warningsLarry Finger
drivers/net/wireless/b43/phy_n.c:512:53: warning: cast truncates bits from constant value (ffff0fff becomes fff) drivers/net/wireless/b43/phy_n.c:765:66: warning: cast truncates bits from constant value (ffff7fff becomes 7fff) drivers/net/wireless/b43/phy_n.c:1012:38: warning: cast truncates bits from constant value (ffff00ff becomes ff) drivers/net/wireless/b43/phy_n.c:1119:38: warning: cast truncates bits from constant value (ffff0fff becomes fff) drivers/net/wireless/b43/phy_n.c:2458:56: warning: cast truncates bits from constant value (ffff7fff becomes 7fff) drivers/net/wireless/b43/phy_n.c:2933:38: warning: cast truncates bits from constant value (ffff0fff becomes fff) drivers/net/wireless/b43/phy_n.c:3294:57: warning: cast truncates bits from constant value (ffff3fff becomes 3fff) Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-21b43: silence most sparse warningsJohn W. Linville
CHECK drivers/net/wireless/b43/main.c drivers/net/wireless/b43/main.c:111:5: warning: symbol 'b43_modparam_pio' was not declared. Should it be static? CHECK drivers/net/wireless/b43/phy_g.c drivers/net/wireless/b43/phy_g.c:975:56: warning: cast truncates bits from constant value (ffff7fff becomes 7fff) CHECK drivers/net/wireless/b43/phy_lp.c drivers/net/wireless/b43/phy_lp.c:2701:6: warning: symbol 'b43_lpphy_op_switch_analog' was not declared. Should it be static? drivers/net/wireless/b43/phy_lp.c:1148:30: warning: cast truncates bits from constant value (ffff1fff becomes 1fff) drivers/net/wireless/b43/phy_lp.c:1525:30: warning: cast truncates bits from constant value (ffff1fff becomes 1fff) drivers/net/wireless/b43/phy_lp.c:1529:30: warning: cast truncates bits from constant value (ffff1fff becomes 1fff) CHECK drivers/net/wireless/b43/wa.c drivers/net/wireless/b43/wa.c:385:60: warning: cast truncates bits from constant value (ffff00ff becomes ff) drivers/net/wireless/b43/wa.c:403:55: warning: cast truncates bits from constant value (ffff00ff becomes ff) drivers/net/wireless/b43/wa.c:405:55: warning: cast truncates bits from constant value (ffff00ff becomes ff) drivers/net/wireless/b43/wa.c:415:71: warning: cast truncates bits from constant value (ffff0fff becomes fff) AFAICT, none of these amount to real bugs. But this reduces warning spam from sparse w/o significantly affecting readability of the code (IMHO). Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-21arch/um/drivers: remove duplicate structure field initializationJulia Lawall
There are two initializations of ndo_set_mac_address, one to a local function that is not used otherwise and one to a function that is defined elsewhere. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier I, s, fld; position p0,p; expression E; @@ struct I s =@p0 { ... .fld@p = E, ...}; @s@ identifier I, s, r.fld; position r.p0,p; expression E; @@ struct I s =@p0 { ... .fld@p = E, ...}; @script:python@ p0 << r.p0; fld << r.fld; ps << s.p; pr << r.p; @@ if int(ps[0].line)<int(pr[0].line) or int(ps[0].column)<int(pr[0].column): cocci.print_main(fld,p0) // </smpl> akpm: - Use the standard eth_mac_addr() in uml_net_set_mac() - Remove unneeded and racy local set_ether_mac() - Remove duplicated (and incorrect) uml_netdev_ops.ndo_set_mac_address initializer. Fixes 8bb95b39a16ed55226810596f92216c53329d2fe ("uml: convert network device to netdevice ops"). [akpm@linux-foundation.org: rework as above] Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-21drivers/net/cxgb3/t3_hw.c: use new hex_to_bin() methodAndy Shevchenko
Get rid of own implementation of hex_to_bin(). Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Acked-by: Divy Le Ray <divy@chelsio.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-21bnx2x: Advance a module versionVladislav Zolotarov
Advance a module version to 1.52.53-2. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-21bnx2x: Protect statistics ramrod and sequence numberVladislav Zolotarov
Bug fix: Protect statistics ramrod sending code and a statistics counter update with a spinlock. Otherwise there was a race condition that would allow sending a statistics ramrods with the same sequence number or with sequence numbers not in a natural order, which would cause a FW assert. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-21bnx2x: Protect a SM state changeVladislav Zolotarov
Bug fix: Protect the statistics state machine state update with a spinlock. Otherwise there was a race condition that would cause the statistics to stay enabled despite the fact that they were disabled in the LINK_DOWN event handler. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-21Bluetooth: Support for Atheros AR300x serial chipSuraj Sumangala
Implements Atheros AR300x serial HCI protocol. This protocol extends H4 serial protocol to implement enhanced power management features supported by Atheros AR300x serial Bluetooth chipsets. Signed-off-by: Suraj Sumangala <suraj@atheros.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Use __packed annotation for driversGustavo F. Padovan
Use the __packed annotation instead of the __attribute__((packed)). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Use __packed annotationGustavo F. Padovan
To make net/ and include/net/ code consistent use __packed instead of __attribute__ ((packed)). Bluetooth subsystem was one of the last net subsys still using __attribute__ ((packed)). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Enable L2CAP Extended features by defaultGustavo F. Padovan
Change the enable_ertm param to disable_ertm and default value to 0. That means that L2CAP Extended features are enabled by default now. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Fix typo in hci_event.cGustavo F. Padovan
memmory -> memory Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Move bit-field variable in USB driver to data->flagsGustavo F. Padovan
did_iso_resume keeps only a bit-field value, so moving that to a proper flags place. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Add Google's copyright to L2CAPGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Implemented HCI frame reassembly for RX from streamSuraj Sumangala
Implemented frame reassembly implementation for reassembling fragments received from stream. Signed-off-by: Suraj Sumangala <suraj@atheros.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Modified hci_recv_fragment() to use hci_reassembly helperSuraj Sumangala
Modified packet based reassembly function hci_recv_fragment() to use hci_reassembly() Signed-off-by: Suraj Sumangala <suraj@atheros.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Implement hci_reassembly helper to reassemble RX packetsSuraj Sumangala
Implements feature to reassemble received HCI frames from any input stream Signed-off-by: Suraj Sumangala <suraj@atheros.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Add one more buffer for HCI stream reassemblySuraj Sumangala
Additional reassembly buffer to keep track of stream reasembly Signed-off-by: Suraj Sumangala <suraj@atheros.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Added support for controller shipped with iMac i5Cyril Lacoux
Device class is ff(vend.) instead of e0(wlcon). Output from command `usb-devices`: T: Bus=01 Lev=03 Prnt=03 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=8215 Rev=01.82 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller S: SerialNumber=7C6D62936607 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none) Signed-off-by: Cyril Lacoux <clacoux@ifeelgood.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Update L2CAP version informationGustavo F. Padovan
We did some changes on the L2CAP configuration process and its behaviour is bit different now. That justifies a updated on the L2CAP version. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Add Copyright notice to L2CAPGustavo F. Padovan
Copyright for the time I worked on L2CAP during the Google Summer of Code program. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Remove unnecessary casts of private_data in driversJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Add HCIUARTSETFLAGS and HCIUARTGETFLAGS ioctlsJohan Hedberg
This patch introduces two new ioctls: HCIUARTSETFLAGS and HCIUARTGETFLAGS. The only flag available for now is HCI_UART_RAW_DEVICE which allows to initialize a UART device into RAW mode from userspace. This is particularly useful for experimenting with Bluetooth controllers that don't yet have proper support in BlueZ. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Keep code under column 80Gustavo F. Padovan
Purely a cosmetic change, it doesn't change the code flow. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Fix bug in kzalloc allocation sizeGustavo F. Padovan
Probably a typo error. We were using the wrong struct to get size. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Add missing HCIUARTGETDEVICE ioctl to compat_ioctl.cJohan Hedberg
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Send ConfigReq after send a ConnectionRspGustavo F. Padovan
The extended L2CAP features requires that one should initiate a ConfigReq after send the ConnectionRsp. This patch changes the behaviour of the configuration process of our stack. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Fix error return on L2CAP-HCI interface.João Paulo Rechi Vita
L2CAP only deals with ACL links. EINVAL should be returned otherwise. Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Fix error value for wrong FCS.João Paulo Rechi Vita
Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Fix error return for l2cap_connect_rsp().João Paulo Rechi Vita
Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Fix error return value on sendmsg.João Paulo Rechi Vita
When the socket is in a bad state EBADFD is more appropriate then EINVAL. Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Fix error return value on sendmsg.João Paulo Rechi Vita
When we try to send a message bigger than the outgoing MTU value EMSGSIZE (message too long) should be returned. Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Make l2cap_streaming_send() void.João Paulo Rechi Vita
It doesn't make sense to have a return value since we always set it to 0. Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Fix l2cap_sock_connect error return.João Paulo Rechi Vita
Return a proper error value if socket is already connected. Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Improve ERTM local busy handlingGustavo F. Padovan
Now we also check if can push skb userspace just after receive a new skb instead of only wait the l2cap_busy_work wake up from time to time to check the local busy condition. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Add backlog queue to ERTM codeGustavo F. Padovan
backlog queue is the canonical mechanism to avoid race conditions due interrupts in bottom half context. After the socket lock is released the net core take care of push all skb in its backlog queue. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Remove the send_lock spinlock from ERTMGustavo F. Padovan
Using a lock to deal with the ERTM race condition - interruption with new data from the hci layer - is wrong. We should use the native skb backlog queue. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Don't accept ConfigReq if we aren't in the BT_CONFIG stateGustavo F. Padovan
If such event happens we shall reply with a Command Reject, because we are not expecting any configure request. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Disconnect early if mode is not supportedGustavo F. Padovan
When mode is mandatory we shall not send connect request and report this to the userspace as well. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Remove check for supported modeGustavo F. Padovan
Since now we have checks for the supported mode before on l2cap_info_rsp we can remove the check for it here. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Refuse ConfigRsp with different modeGustavo F. Padovan
If our mode is Basic Mode we have to refuse any ConfigRsp that proposes a different mode. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Actively send request for Basic ModeGustavo F. Padovan
The Profile Tuning Suite requires that we send a RFC containing the Basic Mode configuration when requesting Basic Mode. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Prefer Basic Mode on receipt of ConfigReqGustavo F. Padovan
If we choose to use Basic Mode then we have to refuse the received mode and propose Basic Mode again. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Disconnect the channel if we don't want the proposed modeGustavo F. Padovan
If the device is a STATE 2 then it should disconnect the channel if the remote device propose a mode different from its mandatory mode. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Change the way we set ERTM mode as mandatoryGustavo F. Padovan
If the socket type is SOCK_STREAM we set Enhanced Retransmisson Mode or Streaming Mode as mandatory. That means that we will close the channel if the other side doesn't support or request the the mandatory mode. Basic mode can't be set as mandatory. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit (git 2.34.1) at 2025-09-21 22:48:09 +0000