summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-05-05drm/core: Do not preserve framebuffer on rmfb, v4.Maarten Lankhorst
It turns out that preserving framebuffers after the rmfb call breaks vmwgfx userspace. This was originally introduced because it was thought nobody relied on the behavior, but unfortunately it seems there are exceptions. drm_framebuffer_remove may fail with -EINTR now, so a straight revert is impossible. There is no way to remove the framebuffer from the lists and active planes without introducing a race because of the different locking requirements. Instead call drm_framebuffer_remove from a workqueue, which is unaffected by signals. Changes since v1: - Add comment. Changes since v2: - Add fastpath for refcount = 1. (danvet) Changes since v3: - Rebased. - Restore lastclose framebuffer removal too. Cc: stable@vger.kernel.org #v4.4+ Fixes: 13803132818c ("drm/core: Preserve the framebuffer after removing it.") Testcase: kms_rmfb_basic References: https://lists.freedesktop.org/archives/dri-devel/2016-March/102876.html Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Thomas Hellstrom <thellstrom@vmware.com> #v3 Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/6c63ca37-0e7e-ac7f-a6d2-c7822e3d611f@linux.intel.com
2016-05-05ARC: support HIGHMEM even without PAE40Vineet Gupta
Initial HIGHMEM support on ARC was introduced for PAE40 where the low memory (0x8000_0000 based) and high memory (0x1_0000_0000) were physically contiguous. So CONFIG_FLATMEM sufficed (despite a peipheral hole in the middle, which wasted a bit of struct page memory, but things worked). However w/o PAE, highmem was not possible and we could only reach ~1.75GB of DDR. Now there is a use case to access ~4GB of DDR w/o PAE40 The idea is to have low memory at canonical 0x8000_0000 and highmem at 0 so enire 4GB address space is available for physical addressing This needs additional platform/interconnect mapping to convert the non contiguous physical addresses into linear bus adresses. From Linux point of view, non contiguous divide means FLATMEM no longer works and DISCONTIGMEM is needed to track the pfns in the 2 regions. This scheme would also work for PAE40, only better in that we don't waste struct page memory for the peripheral hole. The DT description will be something like memory { ... reg = <0x80000000 0x200000000 /* 512MB: lowmem */ 0x00000000 0x10000000>; /* 256MB: highmem */ } Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-05ARC: Fix PAE40 boot failures due to PTE truncationVineet Gupta
So a benign looking cleanup which macro'ized PAGE_SHIFT shifts turned out to be bad (since it was done non-sensically across the board). It caused boot failures with PAE40 as forced cast to (unsigned long) from newly introduced virt_to_pfn() was causing truncatiion of the (long long) pte/paddr values. It is OK to use this in accessors dealing with kernel virtual address, pointers etc, but not for PTE values themelves. Fixes: cJ2ff5cf2735c ("ARC: mm: Use virt_to_pfn() for addr >> PAGE_SHIFT pattern) Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-05ARC: Add missing io barriers to io{read,write}{16,32}be()Vineet Gupta
While reviewing a different change to asm-generic/io.h Arnd spotted that ARC ioread32 and ioread32be both of which come from asm-generic versions are not symmetrical in terms of calling the io barriers. generic ioread32 -> ARC readl() [ has barriers] generic ioread32be -> __be32_to_cpu(__raw_readl()) [ lacks barriers] While generic ioread32be is being remediated to call readl(), that involves a swab32(), causing double swaps on ioread32be() on Big Endian systems. So provide our versions of big endian IO accessors to ensure io barrier calls while also keeping them optimal Suggested-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: stable@vger.kernel.org [4.2+] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-05[media] media-device: fix builds when USB or PCI is compiled as moduleMauro Carvalho Chehab
Just checking ifdef CONFIG_USB is not enough, if the USB is compiled as module. The same applies to PCI. Tested with the following .config alternatives: CONFIG_USB=m CONFIG_MEDIA_CONTROLLER=y CONFIG_MEDIA_SUPPORT=m CONFIG_VIDEO_AU0828=m CONFIG_USB=m CONFIG_MEDIA_CONTROLLER=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_AU0828=m CONFIG_USB=y CONFIG_MEDIA_CONTROLLER=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_AU0828=m CONFIG_USB=y CONFIG_MEDIA_CONTROLLER=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_AU0828=y Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-05-05perf/x86/amd/iommu: Do not register a task ctx for uncore like PMUsPeter Zijlstra
The new sanity check introduced by: 26657848502b ("perf/core: Verify we have a single perf_hw_context PMU") ... triggered on the AMD IOMMU driver. IOMMUs are not per logical CPU, they cannot have per-task counters. Fix it. Reported-by: Borislav Petkov <bp@alien8.de> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: jroedel@suse.de Cc: suravee.suthikulpanit@amd.com Link: http://lkml.kernel.org/r/20160423224255.GB3430@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-05x86/platform/UV: Bring back the call to map_low_mmrs in uv_system_initAlex Thorlton
A while back the following commit: d394f2d9d8e1 ("x86/platform/UV: Remove EFI memmap quirk for UV2+") changed uv_system_init() to only call map_low_mmrs() on older UV1 hardware, which requires EFI_OLD_MEMMAP to be set in order to boot. The recent changes to the EFI memory mapping code in: d2f7cbe7b26a ("x86/efi: Runtime services virtual mapping") exposed some issues with the fact that we were relying on the EFI memory mapping mechanisms to map in our MMRs for us, after commit d394f2d9d8e1. Rather than revert the entire commit and go back to forcing EFI_OLD_MEMMAP on all UVs, we're going to add the call to map_low_mmrs() back into uv_system_init(), and then fix up our EFI runtime calls to use the appropriate page table. For now, UV2+ will still need efi=old_map to boot, but there will be other changes soon that should eliminate the need for this. Signed-off-by: Alex Thorlton <athorlton@sgi.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Russ Anderson <rja@sgi.com> Cc: Dimitri Sivanich <sivanich@sgi.com> Link: http://lkml.kernel.org/r/1462401592-120735-1-git-send-email-athorlton@sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-05perf/x86: Add model numbers for Kabylake CPUsAndi Kleen
Everything the same as Skylake, just new model numbers. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1461977748-17616-1-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-05drm: Fix up markup fumbleDaniel Vetter
It's & for struct references, not #. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462369327-26659-1-git-send-email-daniel.vetter@ffwll.ch
2016-05-05drm/fb_helper: Fix a few typosLyude
s/modest/modeset/ s/aftert/after/ Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462375734-8213-3-git-send-email-cpaul@redhat.com
2016-05-05drm/i915/mst: use reference counted connectors. (v3)Dave Airlie
Don't just free the connector when we get the destroy callback. Drop a reference to it, and set it's mst_port to NULL so no more mst work is done on it. v2: core mst accepts NULLs fine. Cleanup EDID code properly. v3: drop the extra reference we were taking. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-05drm/atomic: use connector references (v3)Dave Airlie
Take a reference when setting a crtc on a connecter, also take one when duplicating if a crtc is set, and drop one on destroy if a crtc is set. v2: take Daniel Stone's advice and simplify the ref/unref dances, also take care of NULL as connector to state reset. v3: remove need for connector NULL check. Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-05drm/crtc: take references to connectors used in a modeset. (v2)Dave Airlie
This just takes a reference on the connector when we set a mode in the non-atomic paths. v2: Follow Daniel Stone's suggestions on when to take/drop references. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-05drm/fb_helper: add connector reference counting. (v2)Dave Airlie
This takes a reference count when fbdev adds the connector, and drops it when it removes the connector. It also drops the now unneeded code to find connectors and remove the from the modeset as they are reference counted. v2: drop references when removing all connectors at end. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-05drm/modes: add connector reference counting. (v2)Dave Airlie
This uses the previous changes to add reference counts to drm connector objects. v2: move fbdev changes to their own patch. add some kerneldoc Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-05drm/fb: fix missing /** in kerneldoc comment.Dave Airlie
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-05Merge tag 'drm-intel-fixes-2016-05-02' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes i915 fixes for 4.6. A bit more than I'd like at this stage, but OTOH they're all stable material. * tag 'drm-intel-fixes-2016-05-02' of git://anongit.freedesktop.org/drm-intel: drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDW drm/i915: Fake HDMI live status drm/i915: Fix eDP low vswing for Broadwell drm/i915/ddi: Fix eDP VDD handling during booting and suspend/resume drm/i915: Fix system resume if PCI device remained enabled drm/i915: Avoid stalling on pending flips for legacy cursor updates
2016-05-05Merge branch 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes two fixes for hw lockups and one for a double free * 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: make sure vertical front porch is at least 1 drm/radeon: make sure vertical front porch is at least 1 drm/amdgpu: set metadata pointer to NULL after freeing.
2016-05-05gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloadingPhilipp Zabel
If of_node is set before calling platform_device_add, the driver core will try to use of: modalias matching, which fails because the device tree nodes don't have a compatible property set. This patch fixes imx-ipuv3-crtc module autoloading by setting the of_node property only after the platform modalias is set. Fixes: 304e6be652e2 ("gpu: ipu-v3: Assign of_node of child platform devices to corresponding ports") Reported-by: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-By: Dennis Gilmore <dennis@ausil.us> Cc: stable@vger.kernel.org # 4.4+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-04drm/amdgpu: Replace rcu_assign_pointer() with RCU_INIT_POINTER()Muhammad Falak R Wani
The rcu_assign_pointer() ensures that the initialization of a structure is carried out before storing a pointer to that structre. It is always safe to use RCU_INIT_POINTER() to NULL a pointer, instead of rcu_assign_pointer(). This results in slightly smaller/faster code. The following semantic patch was used: <smpl> @@ @@ - rcu_assign_pointer + RCU_INIT_POINTER (..., NULL) </smpl> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amdgpu: use drm_mode_vrefresh() rather than mode->vrefreshAlex Deucher
This is a port of radeon commit: 3d2d98ee1af0cf6eebfbd6bff4c17d3601ac1284 drm/radeon: use drm_mode_vrefresh() rather than mode->vrefresh to amdgpu. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-05-04drm/amdgpu/uvd6: add bypass support for fiji (v3)Alex Deucher
Handle uvd clock bypass settings as part of clockgating setup. v2: fix gate logic v3: fix header include Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amdgpu/fiji: set UVD CG state when enabling UVD DPM (v2)Alex Deucher
Need to call the IP cg callbacks. v2: fix gate logic Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/powerplay: add missing clockgating callback for tongaAlex Deucher
Without this clockgating is not enabled. Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amdgpu: Constify some tablesNils Wallménius
Some more tables with constant data were added with the polaris support v2: missed a few Signed-off-by: Nils Wallménius <nils.wallmenius@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: Delete dead struct declarationNils Wallménius
Signed-off-by: Nils Wallménius <nils.wallmenius@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay/hwmgr: don't add invalid voltageMoritz Kühner
if atomctrl_get_voltage_evv_on_sclk returns non zero (fail) in the expansion of the PP_ASSERT_WITH_CODE macro the continue will actually do nothing (The macro uses a do ... while(0) as scope, which eats the continue). Based on the code I don't think this was the intent. Unfortunately fixing this requires rewriting the control flow and removing the macros. v2: added signed of by fixed error message print v3: agd: drop DRM_ERROR Signed-off-by: Moritz Kühner <kuehner.moritz@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay/hwmgr: prevent VDDC from exceeding 2VMoritz Kühner
If the tonga gpu is controlled by SVID2 tonga_get_evv_voltage will only print an error if the voltage exceeds 2V although a comment clearly states that it needs be less than 2V. v2: added signed of by Signed-off-by: Moritz Kühner <kuehner.moritz@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04MAINTAINERS: Remove unneded wildcard for the Radeon/AMDGPU driversEmil Velikov
There are no other files but the UAPI headers, thus we can drop the wildcard. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/radeon: add cayman VM support for append packet.Dave Airlie
This adds support for SET_APPEND_CNT packet3 to the VM paths. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/amdgpu: Add debugfs entries for smc/didt/pcieTom St Denis
This adds 3 new files that can be read/written to access indirect GPU registers. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/amdgpu: Drop print_status callbacks.Tom St Denis
First patch in series to move to user mode debug tools we're removing the print_status callbacks. These functions were unused at the moment anyway. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: revise reading/writing pptable on Polaris10Eric Huang
Change the way we store pptables in the driver to better facilitate eventual runtime updates for debugging. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: revise reading/writing pptable on TongaEric Huang
Change the way we store pptables in the driver to better facilitate eventual runtime updates for debugging. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: revise reading/writing pptable on FijiEric Huang
Change the way we store pptables in the driver to better facilitate eventual runtime updates for debugging. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: revise caching the soft pptable and add it's sizeEric Huang
This fixes a bug in the pptable access interface that could lead to a crash. Check the pointer before using it. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: add dpm force multiple levels on cz/tonga/fiji/polaris (v2)Eric Huang
Allows you to force multiple levels rather than just one via the new sysfs interrface. v2: squash in: drm/amd/powerplay: ensure clock level set by user is valid. From Rex. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: fix fan speed percent setting error on Polaris10Eric Huang
The logic was reversed. Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: fix bug dpm can't work when resume back on PolarisEric Huang
Need to initialize the values to 0 since they get or'ed with additional values. If the initialization is missing, on resume, they may end up with a combination of stale data and new data. Fixes dpm on resume. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: fix some initialize error on polaris10.Rex Zhu
1. don't enable SclkThrottleLowNotification, it's not supported. 2. Set missing mclk_dpm0_activity_target Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: return 0 when interface not implement on some asic.Rex Zhu
Don't fail if certain optional interface callbacks are missing. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amdgpu: fix memory leak in CGS (FW info)Mykola Lysenko
Previously requested FW pointer should not be overwritten on a subsequent call. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: update vce power gate state for baffin.Rex Zhu
Forgot to save the current gate state so we don't know what the current state is if we try and gate/ungate the block. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: Fix a bug for enabling ACDC gpio interruptEric Huang
Only enable it if it's supported rather than unconitionally. Signed-off-by: Eric Yang <eric.yang2@amd.com> Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: fix issue that get wrong reference clock value.Rex Zhu
use wrong parameter to compute the reference clock. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: parameter updates according to SMC.Rex Zhu
Update to latest changes for SMC team. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: add fan control mode interface for baffinRex Zhu
Add interface for manual fan control. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: enable some feature for baffin/ellesmere. (v2)Rex Zhu
Sync up with internal updates. v2: squash in: drm/amd/powerplay: set revert flag for enable thermal protect. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amdgpu: code style refine.Rex Zhu
Whitespace fix. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: fix copy paste error in error messageAlex Deucher
Noticed-by: Vasily Anonimov <vasily.anonimov@googlemail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-11 08:27:14 +0000