summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-04-29Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "A few fixes all over the place: radeon is probably the biggest standout, it's a fix for screen corruption or hung black outputs so I thought it was worth pulling in. Otherwise some amdgpu power control fixes, some misc vmwgfx fixes, one etnaviv fix, one virtio-gpu fix, two DP MST fixes, and a single TTM fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: Fix order of operation drm/vmwgfx: use vmw_cmd_dx_cid_check for query commands. drm/vmwgfx: Enable SVGA_3D_CMD_DX_SET_PREDICATION drm/amdgpu: disable vm interrupts with vm_fault_stop=2 drm/amdgpu: print a message if ATPX dGPU power control is missing Revert "drm/amdgpu: disable runtime pm on PX laptops without dGPU power control" drm/radeon: fix vertical bars appear on monitor (v2) drm/ttm: fix kref count mess in ttm_bo_move_to_lru_tail drm/virtio: send vblank event after crtc updates drm/dp/mst: Restore primary hub guid on resume drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1() drm/etnaviv: don't move linear memory window on 3D cores without MC2.0
2016-04-29Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "Final set of -rc fixes for 4.6. I've collected up a number of patches that are all pretty small with the exception of only a couple. The hfi1 driver has a number of important patches, and it is what really drives the line count of this pull request up. These are all small and I've got this kernel built and running in the test lab (I have most of the hardware, I think nes is the only thing in this patch set that I can't say I've personally tested and have up and running). Summary: - A number of collected fixes for oopses, memory corruptions, deadlocks, etc. All of these fixes are small (many only 5-10 lines), obvious, and tested. - Fix for the security issue related to the use of write for bi-directional communications" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: RDMA/nes: don't leak skb if carrier down IB/security: Restrict use of the write() interface IB/hfi1: Use kernel default llseek for ui device IB/hfi1: Don't attempt to free resources if initialization failed IB/hfi1: Fix missing lock/unlock in verbs drain callback IB/rdmavt: Fix send scheduling IB/hfi1: Prevent unpinning of wrong pages IB/hfi1: Fix deadlock caused by locking with wrong scope IB/hfi1: Prevent NULL pointer deferences in caching code MAINTAINERS: Update iser/isert maintainer contact info IB/mlx5: Expose correct max_sge_rd limit RDMA/iw_cxgb4: Fix bar2 virt addr calculation for T4 chips iw_cxgb4: handle draining an idle qp iw_cxgb3: initialize ibdev.iwcm->ifname for port mapping iw_cxgb4: initialize ibdev.iwcm->ifname for port mapping IB/core: Don't drain non-existent rq queue-pair IB/core: Fix oops in ib_cache_gid_set_default_gid
2016-04-29Merge tag 'usb-serial-4.6-rc6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.6-rc6 Here are some new device ids. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-29raid5: delete unnecessary warnningShaohua Li
If device has R5_LOCKED set, it's legit device has R5_SkipCopy set and page != orig_page. After R5_LOCKED is clear, handle_stripe_clean_event will clear the SkipCopy flag and set page to orig_page. So the warning is unnecessary. Reported-by: Joey Liao <joeyliao@qnap.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-04-29Merge tag 'sunxi-fixes-for-4.6' of ↵Kevin Hilman
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Allwinner fixes for 4.6 A single regulator fix * tag 'sunxi-fixes-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sun8i-q8-common: Do not set constraints on dc1sw regulator
2016-04-29ARM: davinci: only use NVMEM when availableArnd Bergmann
The davinci platform contains code that calls into the nvmem subsystem, but that might be a loadable module, causing a link error: arch/arm/mach-davinci/built-in.o: In function `davinci_get_mac_addr': :(.text+0x1088): undefined reference to `nvmem_device_read' arch/arm/mach-davinci/built-in.o: In function `read_factory_config': :(.text+0x214c): undefined reference to `nvmem_device_read' Also, when NVMEM is completely disabled, the functions fail with nonobvious error messages. This ensures we only call the API functions when the code is actually reachable from the board file, and otherwise prints a unique log message. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: bec3c11bad0e ("misc: at24: replace memory_accessor with nvmem_device_read") Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-04-29Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge fixes from Andrew Morton: "20 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: Documentation/sysctl/vm.txt: update numa_zonelist_order description lib/stackdepot.c: allow the stack trace hash to be zero rapidio: fix potential NULL pointer dereference mm/memory-failure: fix race with compound page split/merge ocfs2/dlm: return zero if deref_done message is successfully handled Ananth has moved kcov: don't profile branches in kcov kcov: don't trace the code coverage code mm: wake kcompactd before kswapd's short sleep .mailmap: add Frank Rowand mm/hwpoison: fix wrong num_poisoned_pages accounting mm: call swap_slot_free_notify() with page lock held mm: vmscan: reclaim highmem zone if buffer_heads is over limit numa: fix /proc/<pid>/numa_maps for THP mm/huge_memory: replace VM_NO_THP VM_BUG_ON with actual VMA check mailmap: fix Krzysztof Kozlowski's misspelled name thp: keep huge zero page pinned until tlb flush mm: exclude HugeTLB pages from THP page_mapped() logic kexec: export OFFSET(page.compound_head) to find out compound tail page kexec: update VMCOREINFO for compound_order/dtor
2016-04-29ip_tunnel: fix preempt warning in ip tunnel creation/updatingPaolo Abeni
After the commit e09acddf873b ("ip_tunnel: replace dst_cache with generic implementation"), a preemption debug warning is triggered on ip4 tunnels updating; the dst cache helper needs to be invoked in unpreemptible context. We don't need to load the cache on tunnel update, so this commit fixes the warning replacing the load with a dst cache reset, which is preempt safe. Fixes: e09acddf873b ("ip_tunnel: replace dst_cache with generic implementation") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-30drm/exynos/mixer: enable HDMI-PHY before configuring MIXERAndrzej Hajda
According to documentation HDMI-PHY must be on prior to MIXER configuration. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/decon5433: enable HDMI-PHY before configuring DECONAndrzej Hajda
According to documentation and tests HDMI-PHY must be on prior to MIXER configuration. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
2016-04-30drm/exynos: add support for pipeline clock to the frameworkAndrzej Hajda
Components belonging to the same pipeline often requires synchronized clocks. Such clocks are sometimes provided by external clock controller, but they can be also provided by pipeline components. In latter case there should be a way to access them from another component belonging to the same pipeline. This is the case of: - DECON,FIMD -> HDMI and HDMI-PHY clock, - FIMD -> DP and DP clock in FIMD. The latter case has been solved by clock_enable callback in exynos_drm_crtc_ops. This solutin will not work with HDMI path as in this case clock is provided by encoder. This patch provides more generic solution allowing to register pipeline clock during initialization in exynos_drm_crtc structure. This way the clock will be easily accessible from both components. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: add helper to get crtc from pipeAndrzej Hajda
The helper abstracts out conversion from pipeline to crtc. Currently it is used in two places, but there will be more uses in next patches. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/decon5433: do not protect window in plane disableAndrzej Hajda
decon_atomic_begin and decon_atomic_flush protects all windows already. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/decon5433: reset decon on startAndrzej Hajda
Resetting IP at starting ensures that DECON will be in known state regardless of changes by bootloader. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/decon5433: fix DECON standalone updateAndrzej Hajda
DECON should be updated after un-protecting windows and after changing output parameters, otherwise image is not displayed in case of HDMI path. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: remove registry dumpAndrzej Hajda
HDMI registry dump unnecessary spoils console and is not very helpful. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: add core reset codeAndrzej Hajda
To ensure HDMI-PHY reprogramming will not affect HDMI the latter should be reset. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: add PHY power off signal handlingAndrzej Hajda
HDMI-PHY power off bit defaults to 0 in older HDMI versions. In case of Exynos5433 it defaults to 1. To make code consistent across all versions this bit is always unset/set in power on/off sequences. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: fix PHY configuration sequenceAndrzej Hajda
Proper PHY configuration should be as follow: 1. set HDMI clock parents to OSCCLK. 2. reconfigure PHY. 3. set HDMI clock parents to PHY. 4. wait for PLL stabilization. The patch fixes it and consolidates the code. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30dt-bindings: video: exynos5433-decon: add bindings for DECON-TVAndrzej Hajda
DECON-TV(Display and Enhancement Controller for TV) is a variation of DECON IP. Its main purpose is to produce video stream for HDMI IP. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30dt-bindings: video: add PCLK clock entry to exynos5433-deconAndrzej Hajda
DECON IP requires this clock to access configuration registers. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: add Exynos5433 supportAndrzej Hajda
HDMI on Exynos5433 differs from previous versions: - different HDMI-PHY settings, - different clocks, - SYSREG registers for enabling reference clock, - MODE_SET register in HDMI-PHY. It is distinguished from other variants by different compatible string. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30dt-bindings: exynos_hdmi: add bindings for Exynos5433 variantAndrzej Hajda
Exynos5433 variant of HDMI requires different set of clocks and sysreg phandle to system registers. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: stop programming registers with default valuesAndrzej Hajda
There is no point in rewriting default values, as the IP is reset anyway. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: code cleanupAndrzej Hajda
The patch performs following clean-ups: - remove unnecessary white spaces, - remove obvious comments, - fix tabulations, - remove NULL initializators, - re-order driver data. The patch does not change driver's behavior. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: use array specifier for HDMI-PHY configurationsAndrzej Hajda
HDMI-PHY configurations are stored as array pointer and count pair, we can re-use existing helpers to simplify their initialization. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: constify global variablesAndrzej Hajda
These variables should not be modified. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: clock code re-factoringAndrzej Hajda
With incoming support for newer SoCs different set of clocks will be required, depending on IP version. The patch prepares the driver for it. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: Use VIDEO_SAMSUNG_S5P_G2D=n as G2D Kconfig dependencyJavier Martinez Canillas
Commit 254d4d111ee1 ("drm/exynos: Add dependency for G2D in Kconfig") made the DRM_EXYNOS_G2D symbol to only be selectable if the s5p-g2d V4L2 driver is not enabled, since both use the same HW IP block. But added the dependency as depends on !VIDEO_SAMSUNG_S5P_G2D which isn't correct since Kconfig expressions are not boolean but tristate. So it will only evaluate to 'n' if VIDEO_SAMSUNG_S5P_G2D=y but it will evaluate to m if VIDEO_SAMSUNG_S5P_G2D=m. This means that both the V4L2 and DRM drivers can be enabled if the former is enabled as a module, which is not what we want. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: fix a warning messageDan Carpenter
The "ret = regmap_write()" assignment was missing so this error message is never printed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: mic: fix an error codeDan Carpenter
We accidentally return success instead of a negative error code here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: fimd: fix broken dp_clock controlMarek Szyprowski
Commit 1feafd3afd294b03dbbedb8e8f94e0c4db526f10 ("drm/exynos: add exynos5420 support for fimd") add support for Exynos 5420 SoC, but it broke enabling display clock feature because of incorrect condition check. This patch fixes it, so display is working again on platforms requiring display clock control (i.e. Exynos5250-based SNOW platform). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: build fbdev code conditionallyAndrzej Hajda
Fbdev code should be compiled only if CONFIG_DRM_FBDEV_EMULATION option is enabled. The patch fixes exynos-drm code trying to manipulate fbdev data which is not initialized in case CONFIG_DRM_FBDEV_EMULATION is disabled. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: fix adjusted_mode pointer in exynos_plane_mode_setAndrzej Hajda
exynos_plane_mode_set should use adjusted_mode from the same atomic state as plane state. Otherwise it will result in incorrect behavior in case crtc mode changes. The patch fixes bug with black console framebuffer in case of command mode panels. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: fix error handling in exynos_drm_subdrv_openArnd Bergmann
gcc-6 warns about a pointless loop in exynos_drm_subdrv_open: drivers/gpu/drm/exynos/exynos_drm_core.c: In function 'exynos_drm_subdrv_open': drivers/gpu/drm/exynos/exynos_drm_core.c:104:199: error: self-comparison always evaluates to false [-Werror=tautological-compare] list_for_each_entry_reverse(subdrv, &subdrv->list, list) { Here, the list_for_each_entry_reverse immediately terminates because the subdrv pointer is compared to itself as the loop end condition. If we were to take the current subdrv pointer as the start of the list (as we would do if list_for_each_entry_reverse() was not a macro), we would iterate backwards over the &exynos_drm_subdrv_list anchor, which would be even worse. Instead, we need to use list_for_each_entry_continue_reverse() to go back over each subdrv that was successfully opened until the first entry. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-29EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callbackTony Luck
Both of these drivers can return NOTIFY_BAD, but this terminates processing other callbacks that were registered later on the chain. Since the driver did nothing to log the error it seems wrong to prevent other interested parties from seeing it. E.g. neither of them had even bothered to check the type of the error to see if it was a memory error before the return NOTIFY_BAD. Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/72937355dd92318d2630979666063f8a2853495b.1461864507.git.tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-04-29MAINTAINERS: Remove Terje Bergström as Tegra DRM maintainerThierry Reding
Terje doesn't work on host1x anymore and doesn't have the time to help maintain the host1x and related drivers. Acked-by: Terje Bergstrom <tbergstrom@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-29Merge branch 'pm-cpufreq-fixes'Rafael J. Wysocki
* pm-cpufreq-fixes: cpufreq: intel_pstate: Fix processing for turbo activation ratio Revert "cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC"
2016-04-29batman-adv: Fix reference counting of hardif_neigh_node object for neigh_nodeSven Eckelmann
The batadv_neigh_node was specific to a batadv_hardif_neigh_node and held an implicit reference to it. But this reference was never stored in form of a pointer in the batadv_neigh_node itself. Instead batadv_neigh_node_release depends on a consistent state of hard_iface->neigh_list and that batadv_hardif_neigh_get always returns the batadv_hardif_neigh_node object which it has a reference for. But batadv_hardif_neigh_get cannot guarantee that because it is working only with rcu_read_lock on this list. It can therefore happen that a neigh_addr is in this list twice or that batadv_hardif_neigh_get cannot find the batadv_hardif_neigh_node for an neigh_addr due to some other list operations taking place at the same time. Instead add a batadv_hardif_neigh_node pointer directly in batadv_neigh_node which will be used for the reference counter decremented on release of batadv_neigh_node. Fixes: cef63419f7db ("batman-adv: add list of unique single hop neighbors per hard-interface") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-29batman-adv: Fix reference counting of vlan object for tt_local_entrySven Eckelmann
The batadv_tt_local_entry was specific to a batadv_softif_vlan and held an implicit reference to it. But this reference was never stored in form of a pointer in the tt_local_entry itself. Instead batadv_tt_local_remove, batadv_tt_local_table_free and batadv_tt_local_purge_pending_clients depend on a consistent state of bat_priv->softif_vlan_list and that batadv_softif_vlan_get always returns the batadv_softif_vlan object which it has a reference for. But batadv_softif_vlan_get cannot guarantee that because it is working only with rcu_read_lock on this list. It can therefore happen that an vid is in this list twice or that batadv_softif_vlan_get cannot find the batadv_softif_vlan for an vid due to some other list operations taking place at the same time. Instead add a batadv_softif_vlan pointer directly in batadv_tt_local_entry which will be used for the reference counter decremented on release of batadv_tt_local_entry. Fixes: 35df3b298fc8 ("batman-adv: fix TT VLAN inconsistency on VLAN re-add") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-29batman-adv: B.A.T.M.A.N V - make sure iface is reactivated upon NETDEV_UP eventAntonio Quartulli
At the moment there is no explicit reactivation of an hard-interface upon NETDEV_UP event. In case of B.A.T.M.A.N. IV the interface is reactivated as soon as the next OGM is scheduled for sending, but this mechanism does not work with B.A.T.M.A.N. V. The latter does not rely on the same scheduling mechanism as its predecessor and for this reason the hard-interface remains deactivated forever after being brought down once. This patch fixes the reactivation mechanism by adding a new routing API which explicitly allows each algorithm to perform any needed operation upon interface re-activation. Such API is optional and is implemented by B.A.T.M.A.N. V only and it just takes care of setting the iface status to ACTIVE Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-04-29batman-adv: fix DAT candidate selection (must use vid)Antonio Quartulli
Now that DAT is VLAN aware, it must use the VID when computing the DHT address of the candidate nodes where an entry is going to be stored/retrieved. Fixes: be1db4f6615b ("batman-adv: make the Distributed ARP Table vlan aware") Signed-off-by: Antonio Quartulli <a@unstable.cc> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-04-29ARC: [axs10x] Specify reserved memory for frame bufferAlexey Brodkin
Allocation of a frame buffer memory in a special memory region allows bypassing of so-called IO Coherency aperture which is typically set as a range 0x8z-0xAz. I.e. all data traffic to PGU bypasses IO Coherency block and saves its bandwidth for other peripherals. Even though for AXS101 (which sorts ARC770 CPU) IOC is not an option for a sake of keeping one DT description for the base-board (axs10x_mb.dtsi) we're still defining reserved memory location in the very end of DDR. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Cc: devicetree@vger.kernel.org
2016-04-29drm/arcpgu: use dedicated memory area for frame bufferAlexey Brodkin
Now when ARC supports reserved memory areas and per-device coherent DMA allocations we may switch ARC PGU to use of those dedicated areas. One of the benefits we may move frame-buffer area out from IO Coherency aperture and so significantly reduce IOC utilization allowing less demanding peripherals to use all perks of IOC. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-kernel@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org
2016-04-29MAINTAINERS: Add maintainer for hisilicon DRM driverXinliang Liu
Add maintainer and reviewer for hisilicon DRM driver. v8: - Append "/" to directory patterns. v7: None. v6: None. v5: None. v4: - Add Chen Feng <puck.chen@hisilicon.com> as Designated reviewer. v3: First version. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
2016-04-29drm/hisilicon: Add support for external bridgeXinliang Liu
Add support for external HDMI bridge. v8: None. v7: None. v6: None. v5: None. v4: None. v3: - Fix a typo: s/exteranl/external. v2: - Remove abtraction layer. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Reviewed-by: Archit Taneja <architt@codeaurora.org>
2016-04-29drm/hisilicon: Add designware dsi host driverXinliang Liu
Add DesignWare dsi host driver for hi6220 SoC. v8: None. v7: None. v6: None. v5: None. v4: None. v3: None. v2: - Remove abtraction layer. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Reviewed-by: Archit Taneja <architt@codeaurora.org>
2016-04-29drm/hisilicon: Add designware dsi encoder driverXinliang Liu
Add DesignWare MIPI DSI Host Controller v1.02 encoder driver for hi6220 SoC. v9: Fix module compile error. v8: None. v7: - A few regs define clean up. v6: - Change "pclk_dsi" to "pclk". v5: None. v4: None. v3: - Rename file name to dw_drm_dsi.c - Make encoder type as DRM_MODE_ENCODER_DSI. - A few cleanup. v2: - Remove abtraction layer. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Signed-off-by: Andy Green <andy.green@linaro.org>
2016-04-29drm/hisilicon: Add cma fbdev and hotplugXinliang Liu
Add cma Fbdev, Fbdev is legency and optional, you can enable/disable it by configuring DRM_FBDEV_EMULATION. Add hotplug. v8: None. v7: None. v6: None. v5: None. v4: None. v3: None. v2: - Use CONFIG_DRM_FBDEV_EMULATION instead of CONFIG_DRM_HISI_FBDEV. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
2016-04-29drm/hisilicon: Add vblank driver for ADEXinliang Liu
Add vblank irq handle. v8: None. v7: - Fix irq flag "DRIVER_IRQF_SHARED" to "IRQF_SHARED". v6: None. v5: None. v4: None. v3: - Remove hisi_get_crtc_from_index func. - A few cleanup. v2: - Remove abtraction layer. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
generated by cgit (git 2.34.1) at 2025-09-12 06:23:49 +0000