| Age | Commit message (Collapse) | Author |
|---|
|
In L3C uncore PMU drivers, bit16 is used to control all counters enable &
disable. Wrong value is given in the driver and its default value is 1'b1,
it can work because each PMU counter has its own control bits too.
Let's fix the wrong value.
Fixes: 2940bc433370 ("perf: hisi: Add support for HiSilicon SoC L3C PMU driver")
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1591350221-32275-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
CONFIG_FTRACE_WITH_REGS does not exist as a Kconfig symbol.
Fixes: 3b23e4991fb6 ("arm64: implement ftrace with regs")
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/b9b27f2233bd1fa31d72ff937beefdae0e2104e5.camel@perches.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Qualcomm APCS global block provides a bunch of generic properties which
are required in a device tree. Add YAML schema for these properties.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
No user pointers for sysctls anymore.
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Reported-by: build test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
No user pointers for sysctls anymore.
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Reported-by: build test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Remove the leftover __user annotation on the prototypes for
neigh_proc_dointvec*. The implementations already got this right, but
the headers kept the __user tags around.
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Reported-by: build test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
cpumask_parse_user works on __user pointers, so this is wrong now.
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Reported-by: build test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Fix test race, in which background poll can get either 5 or 6 samples,
depending on timing of notification. Prevent this by open-coding sample
triggering and forcing notification for the very last sample only.
Also switch to using atomic increments and exchanges for more obviously
reliable counting and checking. Additionally, check expected processed sample
counters for single-threaded use cases as well.
Fixes: 9a5f25ad30e5 ("selftests/bpf: Fix sample_cnt shared between two threads")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200608003615.3549991-1-andriin@fb.com
|
|
Commit b1394e745b94 ("KVM: x86: fix APIC page invalidation") tried
to fix inappropriate APIC page invalidation by re-introducing arch
specific kvm_arch_mmu_notifier_invalidate_range() and calling it from
kvm_mmu_notifier_invalidate_range_start. However, the patch left a
possible race where the VMCS APIC address cache is updated *before*
it is unmapped:
(Invalidator) kvm_mmu_notifier_invalidate_range_start()
(Invalidator) kvm_make_all_cpus_request(kvm, KVM_REQ_APIC_PAGE_RELOAD)
(KVM VCPU) vcpu_enter_guest()
(KVM VCPU) kvm_vcpu_reload_apic_access_page()
(Invalidator) actually unmap page
Because of the above race, there can be a mismatch between the
host physical address stored in the APIC_ACCESS_PAGE VMCS field and
the host physical address stored in the EPT entry for the APIC GPA
(0xfee0000). When this happens, the processor will not trap APIC
accesses, and will instead show the raw contents of the APIC-access page.
Because Windows OS periodically checks for unexpected modifications to
the LAPIC register, this will show up as a BSOD crash with BugCheck
CRITICAL_STRUCTURE_CORRUPTION (109) we are currently seeing in
https://bugzilla.redhat.com/show_bug.cgi?id=1751017.
The root cause of the issue is that kvm_arch_mmu_notifier_invalidate_range()
cannot guarantee that no additional references are taken to the pages in
the range before kvm_mmu_notifier_invalidate_range_end(). Fortunately,
this case is supported by the MMU notifier API, as documented in
include/linux/mmu_notifier.h:
* If the subsystem
* can't guarantee that no additional references are taken to
* the pages in the range, it has to implement the
* invalidate_range() notifier to remove any references taken
* after invalidate_range_start().
The fix therefore is to reload the APIC-access page field in the VMCS
from kvm_mmu_notifier_invalidate_range() instead of ..._range_start().
Cc: stable@vger.kernel.org
Fixes: b1394e745b94 ("KVM: x86: fix APIC page invalidation")
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=197951
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Message-Id: <20200606042627.61070-1-eiichi.tsukata@nutanix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
A couple of Lenovo ThinkCentre machines all have 2 front mics and they
use the same codec alc623 and have the same pin config, so add a
pintbl entry for those machines to apply the fixup
ALC283_FIXUP_HEADSET_MIC.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200608115541.9531-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add and use snd_pcm_stream_lock_nested() in snd_pcm_link/unlink
implementation. The code is fine, but generates a lockdep complaint:
============================================
WARNING: possible recursive locking detected
5.7.1mq+ #381 Tainted: G O
--------------------------------------------
pulseaudio/4180 is trying to acquire lock:
ffff888402d6f508 (&group->lock){-...}-{2:2}, at: snd_pcm_common_ioctl+0xda8/0xee0 [snd_pcm]
but task is already holding lock:
ffff8883f7a8cf18 (&group->lock){-...}-{2:2}, at: snd_pcm_common_ioctl+0xe4e/0xee0 [snd_pcm]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&group->lock);
lock(&group->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by pulseaudio/4180:
#0: ffffffffa1a05190 (snd_pcm_link_rwsem){++++}-{3:3}, at: snd_pcm_common_ioctl+0xca0/0xee0 [snd_pcm]
#1: ffff8883f7a8cf18 (&group->lock){-...}-{2:2}, at: snd_pcm_common_ioctl+0xe4e/0xee0 [snd_pcm]
[...]
Cc: stable@vger.kernel.org
Fixes: f57f3df03a8e ("ALSA: pcm: More fine-grained PCM link locking")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/37252c65941e58473b1219ca9fab03d48f47e3e3.1591610330.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
is_intercept takes an INTERCEPT_* constant, not SVM_EXIT_*; because
of this, the compiler was removing the body of the conditionals,
as if is_intercept returned 0.
This unveils a latent bug: when clearing the VINTR intercept,
int_ctl must also be changed in the L1 VMCB (svm->nested.hsave),
just like the intercept itself is also changed in the L1 VMCB.
Otherwise V_IRQ remains set and, due to the VINTR intercept being clear,
we get a spurious injection of a vector 0 interrupt on the next
L2->L1 vmexit.
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
GCC10 fails to build vmx_preemption_timer_test:
gcc -Wall -Wstrict-prototypes -Wuninitialized -O2 -g -std=gnu99
-fno-stack-protector -fno-PIE -I../../../../tools/include
-I../../../../tools/arch/x86/include -I../../../../usr/include/
-Iinclude -Ix86_64 -Iinclude/x86_64 -I.. -pthread -no-pie
x86_64/evmcs_test.c ./linux/tools/testing/selftests/kselftest_harness.h
./linux/tools/testing/selftests/kselftest.h
./linux/tools/testing/selftests/kvm/libkvm.a
-o ./linux/tools/testing/selftests/kvm/x86_64/evmcs_test
/usr/bin/ld: ./linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):
./linux/tools/testing/selftests/kvm/include/x86_64/vmx.h:603:
multiple definition of `ctrl_exit_rev'; /tmp/ccMQpvNt.o:
./linux/tools/testing/selftests/kvm/include/x86_64/vmx.h:603:
first defined here
/usr/bin/ld: ./linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):
./linux/tools/testing/selftests/kvm/include/x86_64/vmx.h:602:
multiple definition of `ctrl_pin_rev'; /tmp/ccMQpvNt.o:
./linux/tools/testing/selftests/kvm/include/x86_64/vmx.h:602:
first defined here
...
ctrl_exit_rev/ctrl_pin_rev/basic variables are only used in
vmx_preemption_timer_test.c, just move them there.
Fixes: 8d7fbf01f9af ("KVM: selftests: VMX preemption timer migration test")
Reported-by: Marcelo Bandeira Condotta <mcondotta@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200608112346.593513-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add x86_64/debug_regs to .gitignore.
Reported-by: Marcelo Bandeira Condotta <mcondotta@redhat.com>
Fixes: 449aa906e67e ("KVM: selftests: Add KVM_SET_GUEST_DEBUG test")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200608112346.593513-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
handle_vmptrst()/handle_vmread() stopped injecting #PF unconditionally
and switched to nested_vmx_handle_memory_failure() which just kills the
guest with KVM_EXIT_INTERNAL_ERROR in case of MMIO access, zeroing
'exception' in kvm_write_guest_virt_system() is not needed anymore.
This reverts commit 541ab2aeb28251bf7135c7961f3a6080eebcc705.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200605115906.532682-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Syzbot reports the following issue:
WARNING: CPU: 0 PID: 6819 at arch/x86/kvm/x86.c:618
kvm_inject_emulated_page_fault+0x210/0x290 arch/x86/kvm/x86.c:618
...
Call Trace:
...
RIP: 0010:kvm_inject_emulated_page_fault+0x210/0x290 arch/x86/kvm/x86.c:618
...
nested_vmx_get_vmptr+0x1f9/0x2a0 arch/x86/kvm/vmx/nested.c:4638
handle_vmon arch/x86/kvm/vmx/nested.c:4767 [inline]
handle_vmon+0x168/0x3a0 arch/x86/kvm/vmx/nested.c:4728
vmx_handle_exit+0x29c/0x1260 arch/x86/kvm/vmx/vmx.c:6067
'exception' we're trying to inject with kvm_inject_emulated_page_fault()
comes from:
nested_vmx_get_vmptr()
kvm_read_guest_virt()
kvm_read_guest_virt_helper()
vcpu->arch.walk_mmu->gva_to_gpa()
but it is only set when GVA to GPA conversion fails. In case it doesn't but
we still fail kvm_vcpu_read_guest_page(), X86EMUL_IO_NEEDED is returned and
nested_vmx_get_vmptr() calls kvm_inject_emulated_page_fault() with zeroed
'exception'. This happen when the argument is MMIO.
Paolo also noticed that nested_vmx_get_vmptr() is not the only place in
KVM code where kvm_read/write_guest_virt*() return result is mishandled.
VMX instructions along with INVPCID have the same issue. This was already
noticed before, e.g. see commit 541ab2aeb282 ("KVM: x86: work around
leak of uninitialized stack contents") but was never fully fixed.
KVM could've handled the request correctly by going to userspace and
performing I/O but there doesn't seem to be a good need for such requests
in the first place.
Introduce vmx_handle_memory_failure() as an interim solution.
Note, nested_vmx_get_vmptr() now has three possible outcomes: OK, PF,
KVM_EXIT_INTERNAL_ERROR and callers need to know if userspace exit is
needed (for KVM_EXIT_INTERNAL_ERROR) in case of failure. We don't seem
to have a good enum describing this tristate, just add "int *ret" to
nested_vmx_get_vmptr() interface to pass the information.
Reported-by: syzbot+2a7156e11dc199bdbd8a@syzkaller.appspotmail.com
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200605115906.532682-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
As recently reported, some platforms provide a list of power
resources for device power state D3hot, through the _PR3 object,
but they do not provide a list of power resources for device power
state D0.
Among other things, this causes acpi_device_get_power() to return
D3hot as the current state of the device in question if all of the
D3hot power resources are "on", because it sees the power_resources
flag set and calls acpi_power_get_inferred_state() which finds that
D3hot is the shallowest power state with all of the associated power
resources turned "on", so that's what it returns. Moreover, that
value takes precedence over the acpi_dev_pm_explicit_get() return
value, because it means a deeper power state. The device may very
well be in D0 physically at that point, however.
Moreover, the presence of _PR3 without _PR0 for a given device
means that only one D3-level power state can be supported by it.
Namely, because there are no power resources to turn "off" when
transitioning the device from D0 into D3cold (which should be
supported since _PR3 is present), the evaluation of _PS3 should
be sufficient to put it straight into D3cold, but this means that
the effect of turning "on" the _PR3 power resources is unclear,
so it is better to avoid doing that altogether. Consequently,
there is no practical way do distinguish D3cold from D3hot for
the device in question and the power states of it can be labeled
so that D3hot is the deepest supported one (and Linux assumes
that putting a device into D3hot via ACPI may cause power to be
removed from it anyway, for legacy reasons).
To work around the problem described above modify the ACPI
enumeration of devices so that power resources are only used
for device power management if the list of D0 power resources
is not empty and make it mart D3cold as supported only if that
is the case and the D3hot list of power resources is not empty
too.
Fixes: ef85bdbec444 ("ACPI / scan: Consolidate extraction of power resources lists")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205057
Link: https://lore.kernel.org/linux-acpi/20200603194659.185757-1-hdegoede@redhat.com/
Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: youling257@gmail.com
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
The reset member in i915_params was previously changed to unsigned, but
this failed to change the actual module parameter.
Fixes: aae970d8454b ("drm/i915: Mark i915.reset as unsigned")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200602151126.25626-1-jani.nikula@intel.com
(cherry picked from commit 34becfdb945a5eb819b7c8e4f0ec5cc5952ec68f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
If the execbuf is interrupted after building the cmdparser pipeline, and
before we commit to submitting the request to HW, we would attempt to
clean up the cmdparser early. While we held active references to the vma
being parsed and constructed, we did not hold an active reference for
the buffer pool itself. The result was that an interrupted execbuf could
still have run the cmdparser pipeline, but since the buffer pool was
idle, its target vma could have been recycled.
Note this problem only occurs if the cmdparser is running async due to
pipelined waits on busy fences, and the execbuf is interrupted.
Fixes: 686c7c35abc2 ("drm/i915/gem: Asynchronous cmdparser")
Fixes: 16e87459673a ("drm/i915/gt: Move the batch buffer pool from the engine to the gt")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200604103751.18816-1-chris@chris-wilson.co.uk
(cherry picked from commit 57a78ca4eceab1ecb0299fba8a10211289329889)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
rc is initialized to -ENIVAL but that's never used. Drop it.
Fixes: 5f1f79bbc9e2 ("virtio-mem: Paravirtualized memory hotplug")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
|
|
In the files:
- net/mac80211/rx.c
- net/wireless/Kconfig
the wiki url is still the old "wireless.kernel.org"
instead of the new "wireless.wiki.kernel.org"
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Link: https://lore.kernel.org/r/20200605154112.16277-10-f.suligoi@asem.it
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The wiki url is still the old "wireless.kernel.org"
instead of the new "wireless.wiki.kernel.org"
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Link: https://lore.kernel.org/r/20200605154112.16277-9-f.suligoi@asem.it
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In the files:
- regulatory.rst
- mac80211-injection.rst
the wiki url is still the old "wireless.kernel.org"
instead of the new "wireless.wiki.kernel.org"
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Link: https://lore.kernel.org/r/20200605154112.16277-2-f.suligoi@asem.it
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Directory is always locked until "out_unlock" label. So lock check is not
needed.
Signed-off-by: youngjun <her0gyugyu@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Replace the open-code with the new QUIRK_DEVICE_PROFILE() macro for
simplicity.
Fixes: 0c5086f56999 ("ALSA: usb-audio: Add vendor, product and profile name for HP Thunderbolt Dock")
Link: https://lore.kernel.org/r/20200608071513.570-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The HP Thunderbolt Dock has two separate USB devices, one is for speaker
and one is for headset. Add names for them so userspace can apply UCM
settings.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200608062630.10806-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
* new gpu support: a405, a640, a650
* dpu: color processing support
* mdp5: support for msm8x36 (the thing with a405)
* some prep work for per-context pagetables (ie the part that
does not depend on in-flight iommu patches)
* last but not least, UABI update for submit ioctl to support
syncobj (from Bas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGvLMubYPeKZ0rvOp45=+h4HZz-K9XNf0CXYcvPDVbnqLA@mail.gmail.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Includes gvt-next-fixes-2020-05-28
- Use after free fix for display global state.
- Whitelisting context-local timestamp on Gen9
and two scheduler fixes with deps (Cc: stable)
- Removal of write flag from sysfs files where
ineffective
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200604150454.GA59322@jlahtine-desk.ger.corp.intel.com
|
|
git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-fixes-5.8-2020-06-04
amdgpu:
- Prevent hwmon accesses while GPU is in reset
- CTF interrupt fix
- Backlight fix for renoir
- Fix for display sync groups
- Display bandwidth validation workaround
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200604181900.4609-1-alexander.deucher@amd.com
|
|
Pull networking fixes from David Miller:
- Fix the build with certain Kconfig combinations for the Chelsio
inline TLS device, from Rohit Maheshwar and Vinay Kumar Yadavi.
- Fix leak in genetlink, from Cong Lang.
- Fix out of bounds packet header accesses in seg6, from Ahmed
Abdelsalam.
- Two XDP fixes in the ENA driver, from Sameeh Jubran
- Use rwsem in device rename instead of a seqcount because this code
can sleep, from Ahmed S. Darwish.
- Fix WoL regressions in r8169, from Heiner Kallweit.
- Fix qed crashes in kdump mode, from Alok Prasad.
- Fix the callbacks used for certain thermal zones in mlxsw, from Vadim
Pasternak.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
net: dsa: lantiq_gswip: fix and improve the unsupported interface error
mlxsw: core: Use different get_trend() callbacks for different thermal zones
net: dp83869: Reset return variable if PHY strap is read
rhashtable: Drop raw RCU deref in nested_table_free
cxgb4: Use kfree() instead kvfree() where appropriate
net: qed: fixes crash while running driver in kdump kernel
vsock/vmci: make vmci_vsock_transport_cb() static
net: ethtool: Fix comment mentioning typo in IS_ENABLED()
net: phy: mscc: fix Serdes configuration in vsc8584_config_init
net: mscc: Fix OF_MDIO config check
net: marvell: Fix OF_MDIO config check
net: dp83867: Fix OF_MDIO config check
net: dp83869: Fix OF_MDIO config check
net: ethernet: mvneta: fix MVNETA_SKB_HEADROOM alignment
ethtool: linkinfo: remove an unnecessary NULL check
net/xdp: use shift instead of 64 bit division
crypto/chtls:Fix compile error when CONFIG_IPV6 is disabled
inet_connection_sock: clear inet_num out of destroy helper
yam: fix possible memory leak in yam_init_driver
lan743x: Use correct MAC_CR configuration for 1 GBit speed
...
|
|
Pull sparc updates from David Miller:
- Rework the sparc32 page tables so that READ_ONCE(*pmd), as done by
generic code, operates on a word sized element. From Will Deacon.
- Some scnprintf() conversions, from Chen Zhou.
- A pin_user_pages() conversion from John Hubbard.
- Several 32-bit ptrace register handling fixes and such from Al Viro.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
fix a braino in "sparc32: fix register window handling in genregs32_[gs]et()"
sparc32: mm: Only call ctor()/dtor() functions for first and last user
sparc32: mm: Disable SPLIT_PTLOCK_CPUS
sparc32: mm: Don't try to free page-table pages if ctor() fails
sparc32: register memory occupied by kernel as memblock.memory
sparc: remove unused header file nfs_fs.h
sparc32: fix register window handling in genregs32_[gs]et()
sparc64: fix misuses of access_process_vm() in genregs32_[sg]et()
oradax: convert get_user_pages() --> pin_user_pages()
sparc: use scnprintf() in show_pciobppath_attr() in vio.c
sparc: use scnprintf() in show_pciobppath_attr() in pci.c
tty: vcc: Fix error return code in vcc_probe()
sparc32: mm: Reduce allocation size for PMD and PTE tables
sparc32: mm: Change pgtable_t type to pte_t * instead of struct page *
sparc32: mm: Restructure sparc32 MMU page-table layout
sparc32: mm: Fix argument checking in __srmmu_get_nocache()
sparc64: Replace zero-length array with flexible-array
sparc: mm: return true,false in kern_addr_valid()
|
|
|
|
While trying to use the lantiq_gswip driver on one of my boards I made
a mistake when specifying the phy-mode (because the out-of-tree driver
wants phy-mode "gmii" or "mii" for the internal PHYs). In this case the
following error is printed multiple times:
Unsupported interface: 3
While it gives at least a hint at what may be wrong it is not very user
friendly. Print the human readable phy-mode and also which port is
configured incorrectly (this hardware supports ports 0..6) to improve
the cases where someone made a mistake.
Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- HDMI/DP audio HDA fixes
- display hang fix for Volta/Turing
- GK20A regression fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv4PW6tAZY6Uvrhi5OV+4rDXvrtNcoq2w_i35YajByj+ew@mail.gmail.com
|
|
The driver registers three different types of thermal zones: For the
ASIC itself, for port modules and for gearboxes.
Currently, all three types use the same get_trend() callback which does
not work correctly for the ASIC thermal zone. The callback assumes that
the device data is of type 'struct mlxsw_thermal_module', whereas for
the ASIC thermal zone 'struct mlxsw_thermal' is passed as device data.
Fix this by using one get_trend() callback for the ASIC thermal zone and
another for the other two types.
Fixes: 6f73862fabd9 ("mlxsw: core: Add the hottest thermal zone detection")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.8 kernel cycle.
It's just really boring this time. Zero core changes. Just linear
development, cleanups and misc noncritical fixes. Some new drivers for
very new Qualcomm and Intel chips.
New drivers:
- Intel Jasper Lake support.
- NXP Freescale i.MX8DXL support.
- Qualcomm SM8250 support.
- Renesas R8A7742 SH-PFC support.
Driver improvements:
- Severe cleanup and modernization of the MCP23s08 driver.
- Mediatek driver modularized.
- Setting config supported in the Meson driver.
- Wakeup support for the Broadcom BCM7211"
* tag 'pinctrl-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
pinctrl: sprd: Fix the incorrect pull-up definition
pinctrl: pxa: pxa2xx: Remove 'pxa2xx_pinctrl_exit()' which is unused and broken
pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'
pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()'
pinctrl: sirf: add missing put_device() call in sirfsoc_gpio_probe()
pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()'
pinctrl: bcm2835: Add support for wake-up interrupts
pinctrl: bcm2835: Match BCM7211 compatible string
dt-bindings: pinctrl: Document optional BCM7211 wake-up interrupts
dt-bindings: pinctrl: Document 7211 compatible for brcm, bcm2835-gpio.txt
dt-bindings: pinctrl: stm32: Add missing interrupts property
pinctrl: at91-pio4: Add COMPILE_TEST support
pinctrl: Fix return value about devm_platform_ioremap_resource()
MAINTAINERS: Renesas Pin Controllers are supported
dt-bindings: pinctrl: ocelot: Add Sparx5 SoC support
pinctrl: ocelot: Fix GPIO interrupt decoding on Jaguar2
pinctrl: ocelot: Remove instance number from pin functions
pinctrl: ocelot: Always register GPIO driver
dt-bindings: pinctrl: rockchip: update example
pinctrl: amd: Add ACPI dependency
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Not much this cycle apart from the ingenic rtc driver rework.
The fixes are mainly minor issues reported by coccinelle rather than
real world issues.
Subsystem:
- new VL flag for backup switch over
Drivers:
- ingenic: only support device tree
- pcf2127: report battery switch over, handle nowayout"
* tag 'rtc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (29 commits)
rtc: pcf2127: watchdog: handle nowayout feature
rtc: fsl-ftm-alarm: fix freeze(s2idle) failed to wake
rtc: abx80x: Provide debug feedback for invalid dt properties
rtc: abx80x: Add Device Tree matching table
rtc: rv3028: Add missed check for devm_regmap_init_i2c()
rtc: mpc5121: Use correct return value for mpc5121_rtc_probe()
rtc: goldfish: Use correct return value for goldfish_rtc_probe()
rtc: snvs: Add necessary clock operations for RTC APIs
rtc: snvs: Make SNVS clock always prepared
rtc: ingenic: Reset regulator register in probe
rtc: ingenic: Fix masking of error code
rtc: ingenic: Remove unused fields from private structure
rtc: ingenic: Set wakeup params in probe
rtc: ingenic: Enable clock in probe
rtc: ingenic: Use local 'dev' variable in probe
rtc: ingenic: Only support probing from devicetree
rtc: mc13xxx: fix a double-unlock issue
rtc: stmp3xxx: update contact email
rtc: max77686: Use single-byte writes on MAX77620
rtc: pcf2127: report battery switch over
...
|
|
Pull NTB updates from Jon Mason:
"Intel Icelake NTB support, Intel driver bug fixes, and lots of bug
fixes for ntb tests"
* tag 'ntb-5.8' of git://github.com/jonmason/ntb:
NTB: ntb_test: Fix bug when counting remote files
NTB: perf: Fix race condition when run with ntb_test
NTB: perf: Fix support for hardware that doesn't have port numbers
NTB: perf: Don't require one more memory window than number of peers
NTB: ntb_pingpong: Choose doorbells based on port number
NTB: Fix the default port and peer numbers for legacy drivers
NTB: Revert the change to use the NTB device dev for DMA allocations
NTB: ntb_tool: reading the link file should not end in a NULL byte
ntb_perf: avoid false dma unmap of destination address
ntb_perf: increase sleep time from one milli sec to one sec
ntb_tool: pass correct struct device to dma_alloc_coherent
ntb_perf: pass correct struct device to dma_alloc_coherent
ntb: hw: remove the code that sets the DMA mask
NTB: correct ntb_peer_spad_addr and ntb_peer_spad_read comment typos
ntb: intel: fix static declaration
ntb: intel: add hw workaround for NTB BAR alignment
ntb: intel: Add Icelake (gen4) support for Intel NTB
NTB: Fix static check warning in perf_clear_test
include/ntb: Fix typo in ntb_unregister_device description
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Features:
- Replace zero-length array with flexible-array
- add a valid state flags check
- add consistency check between state and dfa diff encode flags
- add apparmor subdir to proc attr interface
- fail unpack if profile mode is unknown
- add outofband transition and use it in xattr match
- ensure that dfa state tables have entries
Cleanups:
- Use true and false for bool variable
- Remove semicolon
- Clean code by removing redundant instructions
- Replace two seq_printf() calls by seq_puts() in aa_label_seq_xprint()
- remove duplicate check of xattrs on profile attachment
- remove useless aafs_create_symlink
Bug fixes:
- Fix memory leak of profile proxy
- fix introspection of of task mode for unconfined tasks
- fix nnp subset test for unconfined
- check/put label on apparmor_sk_clone_security()"
* tag 'apparmor-pr-2020-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: Fix memory leak of profile proxy
apparmor: fix introspection of of task mode for unconfined tasks
apparmor: check/put label on apparmor_sk_clone_security()
apparmor: Use true and false for bool variable
security/apparmor/label.c: Clean code by removing redundant instructions
apparmor: Replace zero-length array with flexible-array
apparmor: ensure that dfa state tables have entries
apparmor: remove duplicate check of xattrs on profile attachment.
apparmor: add outofband transition and use it in xattr match
apparmor: fail unpack if profile mode is unknown
apparmor: fix nnp subset test for unconfined
apparmor: remove useless aafs_create_symlink
apparmor: add proc subdir to attrs
apparmor: add consistency check between state and dfa diff encode flags
apparmor: add a valid state flags check
AppArmor: Remove semicolon
apparmor: Replace two seq_printf() calls by seq_puts() in aa_label_seq_xprint()
|
|
Commit 6cc7c266e5b4 ("ima: Call ima_calc_boot_aggregate() in
ima_eventdigest_init()") added a call to ima_calc_boot_aggregate() so that
the digest can be recalculated for the boot_aggregate measurement entry if
the 'd' template field has been requested. For the 'd' field, only SHA1 and
MD5 digests are accepted.
Given that ima_eventdigest_init() does not have the __init annotation, all
functions called should not have it. This patch removes __init from
ima_pcrread().
Cc: stable@vger.kernel.org
Fixes: 6cc7c266e5b4 ("ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
IPC MU has no power domain assigned and there could be IPC during
noirq suspend phase, so IRQF_NO_SUSPEND flag is needed for IPC MU.
However, for other MUs, they have power domain assigned and their
power will be turned off during noirq suspend phase, but with
IRQF_NO_SUSPEND set, their interrupts are NOT disabled even after
their power turned off, it will cause system crash when mailbox
driver trys to handle pending interrupts but the MU power is already
turned off.
So, IRQF_NO_SUSPEND flag should ONLY be added to IPC MU which has
power domain managed by SCU, then all other MUs' pending interrupts
after noirq suspend phase will be handled after system resume.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Some of i.MX8M SoCs have MU clock, they need to be managed in runtime
to make sure the MU clock can be off in runtime, add runtime PM callback
to handle MU clock.
And on i.MX8MP, the MU clock is combined with power domain and runtime
PM is enabled for the clock driver, during noirq suspend/resume phase,
runtime PM is disabled by device suspend, but the MU context save/restore
needs to enable MU clock for register access, calling clock prepare/enable
will trigger runtime resume failure and lead to system suspend failed.
Actually, the MU context save/restore is ONLY necessary for SCU IPC MU,
other MUs especially on i.MX8MP platforms which have MU clock assigned,
they need to runtime request/free mailbox channel in the consumer driver,
so no need to save/restore MU context for them, hence it can avoid this
issue, so the MU context save/restore is ONLY applied to i.MX platforms
MU instance without clock present.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
For "mem" mode suspend on i.MX8 SoCs, MU settings could be
lost because its power is off, so save/restore is needed
for MU settings during suspend/resume. However, the restore
can ONLY be done when MU settings are actually lost, for the
scenario of settings NOT lost in "freeze" mode suspend, since
there could be still IPC going on multiple CPUs, restoring the
MU settings could overwrite the TIE by mistake and cause system
freeze, so need to make sure ONLY restore the MU settings when
it is powered off, Anson fixes this by checking whether restore
is actually needed when resume.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
When the proxy isn't replaced and the profile is removed, the proxy
is being leaked resulting in a kmemleak check message of
unreferenced object 0xffff888077a3a490 (size 16):
comm "apparmor_parser", pid 128041, jiffies 4322684109 (age 1097.028s)
hex dump (first 16 bytes):
03 00 00 00 00 00 00 00 b0 92 fd 4b 81 88 ff ff ...........K....
backtrace:
[<0000000084d5daf2>] aa_alloc_proxy+0x58/0xe0
[<00000000ecc0e21a>] aa_alloc_profile+0x159/0x1a0
[<000000004cc9ce15>] unpack_profile+0x275/0x1c40
[<000000007332b3ca>] aa_unpack+0x1e7/0x7e0
[<00000000e25e31bd>] aa_replace_profiles+0x18a/0x1d10
[<00000000350d9415>] policy_update+0x237/0x650
[<000000003fbf934e>] profile_load+0x122/0x160
[<0000000047f7b781>] vfs_write+0x139/0x290
[<000000008ad12358>] ksys_write+0xcd/0x170
[<000000001a9daa7b>] do_syscall_64+0x70/0x310
[<00000000b9efb0cf>] entry_SYSCALL_64_after_hwframe+0x49/0xb3
Make sure to cleanup the profile's embedded label which will result
on the proxy being properly freed.
Fixes: 637f688dc3dc ("apparmor: switch from profiles to using labels on contexts")
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Fix two issues with introspecting the task mode.
1. If a task is attached to a unconfined profile that is not the
ns->unconfined profile then. Mode the mode is always reported
as -
$ ps -Z
LABEL PID TTY TIME CMD
unconfined 1287 pts/0 00:00:01 bash
test (-) 1892 pts/0 00:00:00 ps
instead of the correct value of (unconfined) as shown below
$ ps -Z
LABEL PID TTY TIME CMD
unconfined 2483 pts/0 00:00:01 bash
test (unconfined) 3591 pts/0 00:00:00 ps
2. if a task is confined by a stack of profiles that are unconfined
the output of label mode is again the incorrect value of (-) like
above, instead of (unconfined). This is because the visibile
profile count increment is skipped by the special casing of
unconfined.
Fixes: f1bd904175e8 ("apparmor: add the base fns() for domain labels")
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Currently apparmor_sk_clone_security() does not check for existing
label/peer in the 'new' struct sock; it just overwrites it, if any
(with another reference to the label of the source sock.)
static void apparmor_sk_clone_security(const struct sock *sk,
struct sock *newsk)
{
struct aa_sk_ctx *ctx = SK_CTX(sk);
struct aa_sk_ctx *new = SK_CTX(newsk);
new->label = aa_get_label(ctx->label);
new->peer = aa_get_label(ctx->peer);
}
This might leak label references, which might overflow under load.
Thus, check for and put labels, to prevent such errors.
Note this is similarly done on:
static int apparmor_socket_post_create(struct socket *sock, ...)
...
if (sock->sk) {
struct aa_sk_ctx *ctx = SK_CTX(sock->sk);
aa_put_label(ctx->label);
ctx->label = aa_get_label(label);
}
...
Context:
-------
The label reference count leak is observed if apparmor_sock_graft()
is called previously: this sets the 'ctx->label' field by getting
a reference to the current label (later overwritten, without put.)
static void apparmor_sock_graft(struct sock *sk, ...)
{
struct aa_sk_ctx *ctx = SK_CTX(sk);
if (!ctx->label)
ctx->label = aa_get_current_label();
}
And that is the case on crypto/af_alg.c:af_alg_accept():
int af_alg_accept(struct sock *sk, struct socket *newsock, ...)
...
struct sock *sk2;
...
sk2 = sk_alloc(...);
...
security_sock_graft(sk2, newsock);
security_sk_clone(sk, sk2);
...
Apparently both calls are done on their own right, especially for
other LSMs, being introduced in 2010/2014, before apparmor socket
mediation in 2017 (see commits [1,2,3,4]).
So, it looks OK there! Let's fix the reference leak in apparmor.
Test-case:
---------
Exercise that code path enough to overflow label reference count.
$ cat aa-refcnt-af_alg.c
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <sys/socket.h>
#include <linux/if_alg.h>
int main() {
int sockfd;
struct sockaddr_alg sa;
/* Setup the crypto API socket */
sockfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
if (sockfd < 0) {
perror("socket");
return 1;
}
memset(&sa, 0, sizeof(sa));
sa.salg_family = AF_ALG;
strcpy((char *) sa.salg_type, "rng");
strcpy((char *) sa.salg_name, "stdrng");
if (bind(sockfd, (struct sockaddr *) &sa, sizeof(sa)) < 0) {
perror("bind");
return 1;
}
/* Accept a "connection" and close it; repeat. */
while (!close(accept(sockfd, NULL, 0)));
return 0;
}
$ gcc -o aa-refcnt-af_alg aa-refcnt-af_alg.c
$ ./aa-refcnt-af_alg
<a few hours later>
[ 9928.475953] refcount_t overflow at apparmor_sk_clone_security+0x37/0x70 in aa-refcnt-af_alg[1322], uid/euid: 1000/1000
...
[ 9928.507443] RIP: 0010:apparmor_sk_clone_security+0x37/0x70
...
[ 9928.514286] security_sk_clone+0x33/0x50
[ 9928.514807] af_alg_accept+0x81/0x1c0 [af_alg]
[ 9928.516091] alg_accept+0x15/0x20 [af_alg]
[ 9928.516682] SYSC_accept4+0xff/0x210
[ 9928.519609] SyS_accept+0x10/0x20
[ 9928.520190] do_syscall_64+0x73/0x130
[ 9928.520808] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Note that other messages may be seen, not just overflow, depending on
the value being incremented by kref_get(); on another run:
[ 7273.182666] refcount_t: saturated; leaking memory.
...
[ 7273.185789] refcount_t: underflow; use-after-free.
Kprobes:
-------
Using kprobe events to monitor sk -> sk_security -> label -> count (kref):
Original v5.7 (one reference leak every iteration)
... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd2
... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4
... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd3
... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd5
... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4
... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd6
Patched v5.7 (zero reference leak per iteration)
... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593
... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593
... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593
... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
Commits:
-------
[1] commit 507cad355fc9 ("crypto: af_alg - Make sure sk_security is initialized on accept()ed sockets")
[2] commit 4c63f83c2c2e ("crypto: af_alg - properly label AF_ALG socket")
[3] commit 2acce6aa9f65 ("Networking") a.k.a ("crypto: af_alg - Avoid sock_graft call warning)
[4] commit 56974a6fcfef ("apparmor: add base infastructure for socket mediation")
Fixes: 56974a6fcfef ("apparmor: add base infastructure for socket mediation")
Reported-by: Brian Moyles <bmoyles@netflix.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
This has been found by the Kernel Test Robot:
http://lkml.iu.edu/hypermail/linux/kernel/2006.0/06862.html
With CONFIG_AMIGA_PCMCIA=n, io_mm.h does not pull in amigahw.h and
ZTWO_VADDR is undefined. Add forgotten include to i2c-icy.c
Fixes: 4768e90ecaec ("i2c: Add i2c-icy for I2C on m68k/Amiga")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
habanalabs: correctly cast u64 to void*
habanalabs: initialize variable to default value
extcon: arizona: Fix runtime PM imbalance on error
extcon: max14577: Add proper dt-compatible strings
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
extcon: remove redundant assignment to variable idx
w1: omap-hdq: print dev_err if irq flags are not cleared
w1: omap-hdq: fix interrupt handling which did show spurious timeouts
w1: omap-hdq: fix return value to be -1 if there is a timeout
w1: omap-hdq: cleanup to add missing newline for some dev_dbg
/dev/mem: Revoke mappings when a driver claims the region
misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
nvmem: qfprom: remove incorrect write support
habanalabs: handle MMU cache invalidation timeout
habanalabs: don't allow hard reset with open processes
habanalabs: GAUDI does not support soft-reset
habanalabs: add print for soft reset due to event
habanalabs: improve MMU cache invalidation code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core patches for 5.8-rc1.
Not all that huge this release, just a number of small fixes and
updates:
- software node fixes
- kobject now sends KOBJ_REMOVE when it is removed from sysfs, not
when it is removed from memory (which could come much later)
- device link additions and fixes based on testing on more devices
- firmware core cleanups
- other minor changes, full details in the shortlog
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (23 commits)
driver core: Update device link status correctly for SYNC_STATE_ONLY links
firmware_loader: change enum fw_opt to u32
software node: implement software_node_unregister()
kobject: send KOBJ_REMOVE uevent when the object is removed from sysfs
driver core: Remove unnecessary is_fwnode_dev variable in device_add()
drivers property: When no children in primary, try secondary
driver core: platform: Fix spelling errors in platform.c
driver core: Remove check in driver_deferred_probe_force_trigger()
of: platform: Batch fwnode parsing when adding all top level devices
driver core: fw_devlink: Add support for batching fwnode parsing
driver core: Look for waiting consumers only for a fwnode's primary device
driver core: Move code to the right part of the file
Revert "Revert "driver core: Set fw_devlink to "permissive" behavior by default""
drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish
firmware_loader: move fw_fallback_config to a private kernel symbol namespace
driver core: Add missing '\n' in log messages
driver/base/soc: Use kobj_to_dev() API
Add documentation on meaning of -EPROBE_DEFER
driver core: platform: remove redundant assignment to variable ret
debugfs: Use the correct style for SPDX License Identifier
...
|
