summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-18tilegx: enable SYSCALL_WRAPPERS supportChris Metcalf
Some discussion with the glibc mailing lists revealed that this was necessary for 64-bit platforms with MIPS-like sign-extension rules for 32-bit values. The original symptom was that passing (uid_t)-1 to setreuid() was failing in programs linked -pthread because of the "setxid" mechanism for passing setxid-type function arguments to the syscall code. SYSCALL_WRAPPERS handles ensuring that all syscall arguments end up with proper sign-extension and is thus the appropriate fix for this problem. On other platforms (s390, powerpc, sparc64, and mips) this was fixed in 2.6.28.6. The general issue is tracked as CVE-2009-0029. Cc: <stable@vger.kernel.org> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-05-18ipv6: remove csummode in ip6_append_data()Eric Dumazet
csummode variable is always CHECKSUM_NONE in ip6_append_data() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-18net: introduce netdev_alloc_frag()Eric Dumazet
Fix two issues introduced in commit a1c7fff7e18f5 ( net: netdev_alloc_skb() use build_skb() ) - Must be IRQ safe (non NAPI drivers can use it) - Must not leak the frag if build_skb() fails to allocate sk_buff This patch introduces netdev_alloc_frag() for drivers willing to use build_skb() instead of __netdev_alloc_skb() variants. Factorize code so that : __dev_alloc_skb() is a wrapper around __netdev_alloc_skb(), and dev_alloc_skb() a wrapper around netdev_alloc_skb() Use __GFP_COLD flag. Almost all network drivers now benefit from skb->head_frag infrastructure. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-18iwlwifi: dont pull too much payload in skb headEric Dumazet
As iwlwifi use fat skbs, it should not pull too much data in skb->head, and particularly no tcp data payload, or splice() is slower, and TCP coalescing is disabled. Copying payload to userland also involves at least two copies (part from header, part from fragment) Each layer will pull its header from the fragment as needed. (on 64bit arches, skb_tailroom(skb) at this point is 192 bytes) With this patch applied, I have a major reduction of collapsed/pruned TCP packets, a nice increase of TCPRcvCoalesce counter, and overall better Internet User experience. Small packets are still using a fragless skb, so that page can be reused by the driver. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-18Merge tag 'linus-mce-fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull a machine check recovery fix from Tony Luck. I really don't like how the MCE code does some of the things it does, but this does seem to be an improvement. * tag 'linus-mce-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: x86/mce: Only restart instruction after machine check recovery if it is safe
2012-05-18ASoC: OMAP: HDMI: Introduce codecRicardo Neri
Introduce codec for HDMI. At the moment, this is a dummy codec. In the future it will parse the EDID to modify the supported parameters, such as the number of channels and the sample rates. At the moment, it blindly supports all the sample rates and audio channels described in the HDMI 1.4a specification. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18Merge remote-tracking branch 'tip/perf/urgent' into perf/coreArnaldo Carvalho de Melo
Merge reason: We are going to queue up a dependent patch: "perf tools: Move parse event automated tests to separated object" That depends on: commit e7c72d8 perf tools: Add 'G' and 'H' modifiers to event parsing Conflicts: tools/perf/builtin-stat.c Conflicted with the recent 'perf_target' patches when checking the result of perf_evsel open routines to see if a retry is needed to cope with older kernels where the exclude guest/host perf_event_attr bits were not used. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-18mfd: palmas PMIC device support KconfigGraeme Gregory
Add the new palmas MFD to Kconfig and Makefile Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18mfd: palmas PMIC device supportGraeme Gregory
Palmas is a PMIC from Texas Instruments and this is the MFD part of the driver for this chip. The PMIC has SMPS and LDO regulators, a general purpose ADC, GPIO, USB OTG mode detection, watchdog and RTC features. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18ARM: mx31_3ds: Add sound supportPhilippe Rétornaz
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18ASoC: imx-mc13783 cleanupPhilippe Rétornaz
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18mx31moboard: Add sound supportPhilippe Rétornaz
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18ASoC: mc13783 codec cleanupsPhilippe Rétornaz
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18ASoC: add imx-mc13783 sound supportPhilippe Rétornaz
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18ASoC: Add mc13783 codecPhilippe Rétornaz
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18mfd: mc13xxx: add codec platform dataPhilippe Rétornaz
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18regulator: Enable Device Tree for the db8500-prcmu regulator driverLee Jones
Here we use the previous regulator register code separated from probe to register each of the regulators mentioned in Device Tree. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18regulator: db8500-prcmu: Separate regulator registration from probeLee Jones
This will provide us with a convenient way to register regulators when booting with Device Tree both enabled & disabled and will save us a great deal of code duplication in time. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18perf tools: Split term type into value type and term typeJiri Olsa
Introducing type_val and type_term for term instead of a single type value. Currently the term type marked out the value type as well. With this change we can have future string term values being specified by user and translated into proper number along the processing. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1335371102-11358-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-18gpio/omap: (re)fix wakeups on level-triggered GPIOsKevin Hilman
commit 1b1287032 (gpio/omap: fix missing check in *_runtime_suspend()) broke wakeups on level-triggered GPIOs by adding the enabled non-wakeup GPIO check before the workaround that enables wakeups on level-triggered IRQs, effectively disabling that workaround. To fix, move the enabled non-wakeup GPIO check after the level-triggered IRQ workaround. Reported-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Tested-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-18gpio/omap: fix broken context restore for non-OFF mode transitionsKevin Hilman
The fix in commit 1b1287032 (gpio/omap: fix missing check in *_runtime_suspend()) exposed another bug in the context restore path. Currently, the per-bank context restore happens whenever the context loss count is different in runtime suspend and runtime resume *and* whenever the per-bank contex_loss_count == 0: if (context_lost_cnt_after != bank->context_loss_count || !context_lost_cnt_after) { omap_gpio_restore_context(bank); Restoring context when the context_lost_cnt_after == 0 is clearly wrong, since this will be true until the first off-mode transition (which could be never, if off-mode is never enabled.) This check causes the context to be restored on *every* runtime PM transition. Before commit 1b1287032 (gpio/omap: fix missing check in *_runtime_suspend()), this code was never executed in non-OFF mode, so there were never spurious context restores happening. After that change though, spurious context restores could happen. To fix, simply remove the !context_lost_cnt_after check. It is not needed. This bug was found when noticing that the smc911x NIC on 3530/Overo was not working, and git bisect tracked it down to this patch. It seems that the spurious context restore was causing the smsc911x to not be properly probed on this platform. Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-18C6X: remove unused config itemsMark Salter
Signed-off-by: Mark Salter <msalter@redhat.com>
2012-05-18ALSA: hda - unlock on error in azx_interrupt()Dan Carpenter
There is an spin_unlock() missing on this error path. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-18ext2: trivial fix to comment for ext2_free_blocksWang Sheng-Hui
The function is ext2_free_blocks(), not ext2_free_blocks_sb(). Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-05-18Merge branch 'at91/dt' into next/dtArnd Bergmann
This should help the merge with the at91 adc driver that is currently in the staging tree. * at91/dt: ARM: at91: Add ADC driver to at91sam9260/at91sam9g20 dtsi files Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-18ARM: at91: Add ADC driver to at91sam9260/at91sam9g20 dtsi filesNicolas Ferre
Now that the bulk of at91sam9g20-related nodes are located in at91sam9260.dtsi, we have to re-create the path to this ADC node for SoC specific parts. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-18perf/x86: Update event scheduling constraints for AMD family 15h modelsRobert Richter
This update is for newer family 15h cpu models from 0x02 to 0x1f. Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: stable@vger.kernel.org # v2.6.39+ Link: http://lkml.kernel.org/r/1337337642-1621-1-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-18sched: Taint kernel with TAINT_WARN after sleep-in-atomic bugKonstantin Khlebnikov
Usually sleep-in-atomic bugs are followed by dozens other warnings. This patch should help to figure out original source of problem. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120510122004.4873.12726.stgit@zurg Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-18sh64: Fix up vmalloc fault range check.Paul Mundt
With the previous attempt reverted this switches to conditionalizing the end address. Nominally VMALLOC_END, but extended for P3_ADDR_MAX in the store queue case. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18Revert "sh: Ensure fixmap and store queue space can co-exist."Paul Mundt
This reverts commit 20e7c297efeca0861adcca073a0d283da659834b. With store queues enabled the area above P4SEG has special properties from the MMU's point of view, which was causing fixmap failure. We'll have to do something else to satisfy the vmalloc range check. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18drm/prime: expose capability flags for userspace.Dave Airlie
This lets the kernel tell userspace if the device supports prime import/export. This is useful for -modesetting at least, but would be nice for other drivers. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-18serial: sh-sci: Fix for port types without BRI interrupts.Paul Mundt
In doing the evt2irq() + muxed vector conversion for various port types it became apparent that some of the legacy port types will presently error out due to the irq requesting logic attempting to acquire the non-existent BRI IRQ. This adds some sanity checks to the request/free path to ensure that non-existence of a source in itself is not an error. This should restore functionality for legacy PORT_SCI ports. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18Merge branch 'sh/evt2irq-migration' into sh-latestPaul Mundt
Conflicts: arch/sh/kernel/cpu/sh3/setup-sh770x.c arch/sh/kernel/cpu/sh3/setup-sh7710.c arch/sh/kernel/cpu/sh3/setup-sh7720.c arch/sh/kernel/cpu/sh4/setup-sh7750.c arch/sh/kernel/cpu/sh4a/setup-sh7343.c arch/sh/kernel/cpu/sh4a/setup-sh7366.c arch/sh/kernel/cpu/sh4a/setup-sh7722.c arch/sh/kernel/cpu/sh4a/setup-sh7723.c arch/sh/kernel/cpu/sh4a/setup-sh7724.c arch/sh/kernel/cpu/sh4a/setup-sh7757.c arch/sh/kernel/cpu/sh4a/setup-sh7763.c arch/sh/kernel/cpu/sh4a/setup-sh7770.c arch/sh/kernel/cpu/sh4a/setup-sh7785.c arch/sh/kernel/cpu/sh4a/setup-sh7786.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: legacy PCI evt2irq migration.Paul Mundt
This converts over the legacy PCI IRQs to evt2irq() backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: cpu dma evt2irq migration.Paul Mundt
This migrates the cpu-family relative DMA IRQ definitions over to evt2irq() backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: sh7763rdp evt2irq migration.Paul Mundt
Migrate sh7763rdp to evt2irq backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: sdk7780 evt2irq migration.Paul Mundt
Migrate sdk7780 to evt2irq backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18x86-64: Fix accounting in kernel_physical_mapping_init()Jan Beulich
When finding a present and acceptable 2M/1G mapping, the number of pages mapped this way shouldn't be incremented (as it was already incremented when the earlier part of the mapping was established). Instead, last_map_addr needs to be updated in this case. Further, address increments were wrong in one place each in both phys_pmd_init() and phys_pud_init() (lacking the aligning down to the respective page boundary). As we're now doing the same calculation several times, fold it into a single instance using a local variable (matching how kernel_physical_mapping_init() itself does it at the PGD level). Observed during code inspection, not because of an actual problem. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/4FB3C27202000078000841A0@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-18x86/tlb: Clean up and unify TLB_FLUSH_ALL definitionAlex Shi
Since sizeof(long) is 4 in x86_32 mode, and it's 8 in x86_64 mode, sizeof(long long) is also 8 byte in x86_64 mode. use long mode can fit TLB_FLUSH_ALL defination here both in 32 or 64 bits mode. Signed-off-by: Alex Shi <alex.shi@intel.com> Link: http://lkml.kernel.org/n/tip-evv5bekiipi2pmyzdsy8lkkw@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-18sh: migor evt2irq migration.Paul Mundt
Migrate migor to evt2irq backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: landisk evt2irq migration.Paul Mundt
Migrate landisk to evt2irq backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18x86/apic: Implement EIO micro-optimizationMichael S. Tsirkin
We know both register and value for eoi beforehand, so there's no need to check it and no need to do math to calculate the msr. Saves instructions/branches on each EOI when using x2apic. I looked at the objdump output to verify that the generated code looks right and actually is shorter. The real improvemements will be on the KVM guest side though, those come in a later patch. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: gleb@redhat.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/e019d1a125316f10d3e3a4b2f6bda41473f4fb72.1337184153.git.mst@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-18x86/apic: Add apic->eoi_write() callbackMichael S. Tsirkin
Add eoi_write callback so that kvm can override eoi accesses without touching the rest of the apic. As a side-effect, this will enable a micro-optimization for apics using msr. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: gleb@redhat.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/0df425d746c49ac2ecc405174df87752869629d2.1337184153.git.mst@redhat.com [ tidied it up a bit ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-18x86/apic: Use symbolic APIC_EOI_ACKMichael S. Tsirkin
Use the symbol instead of hard-coded numbers, now that the reason for the value is documented where the constant is defined we don't need to duplicate this explanation in code. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: gleb@redhat.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/ecbe4c79d69c172378e47e5a587ff5cd10293c9f.1337184153.git.mst@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-18x86/apic: Fix typo EIO_ACK -> EOI_ACK and document itMichael S. Tsirkin
Fix typo in the macro name and document the reason it has this value. Update users. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: gleb@redhat.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/37867b31b9330690af2e60a2a7c4cb4b1b070caf.1337184153.git.mst@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-18regulator: ab3100: Use regulator_map_voltage_iterate()Axel Lin
regulator_map_voltage_iterate() is for drivers implementing set_voltage_sel() and list_voltage() to use it as their map_voltage() operation. In this case, regulator_map_voltage_iterate() happen to be doing the same thing as ab3100_get_best_voltage_index() function. So we can use it to replace ab3100_get_best_voltage_index() function. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18regulator: tps65217: Convert to set_voltage_sel and map_voltageAxel Lin
Convert tps65217_pmic_ops to use set_voltage_sel and map_voltage. After this convertion, we can also use tps65217_pmic_set_voltage_sel() for set_voltage_sel callback of tps65217_pmic_ldo1_ops. Thus this patch also removes tps65217_pmic_ldo1_set_voltage_sel() function. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18regulator: Enable the ab8500 for Device TreeLee Jones
Here we setup the ab8500 regulator driver for DT. We first do this in the normal way, by providing a match structure during initialisation, but then we provide information so that whilst probing we can use existing data structures to do DT look-ups. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18regulator: ab8500: Split up probe() into manageable piecesLee Jones
ab8500's probe() function is becoming quite large, so in the lead up to Device Tree enablement which will fork the thread of execution this patch splits it into 3 main areas; basic error checking will remain in probe(), but regulator register initialisation and regulator registration have been moved to their own functions which will be called in sequence by probe() and the DT equivalent. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18x86/xen/apic: Add missing #include <xen/xen.h>Ingo Molnar
This file depends on <xen/xen.h>, but the dependency was hidden due to: <asm/acpi.h> -> <asm/trampoline.h> -> <asm/io.h> -> <xen/xen.h> With the removal of <asm/trampoline.h>, this exposed the missing Cc: Len Brown <lenb@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/n/tip-7ccybvue6mw6wje3uxzzcglj@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-20 12:49:22 +0000