summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-12-09Merge tag 'linux-can-next-for-3.19-20141207' of ↵David S. Miller
git://gitorious.org/linux-can/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2014-12-07 this is a pull request of 8 patches for net-next/master. Andri Yngvason contributes 4 patches in which the CAN state change handling is consolidated and unified among the sja1000, mscan and flexcan driver. The three patches by Jeremiah Mahler fix spelling mistakes and eliminate the banner[] variable in various parts. And a patch by me that switches on sparse endianess checking by default. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09Merge tag 'linux-can-fixes-for-3.18-20141207' of ↵David S. Miller
git://gitorious.org/linux-can/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2014-12-07 this is a pull request of three patches by Stephane Grosjean which fix several bugs in the peak_usb CAN drivers. Please queue, if possible for 3.18, if it's too late these patches takes the slow lane via net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09tcp: refine TSO autosizingEric Dumazet
Commit 95bd09eb2750 ("tcp: TSO packets automatic sizing") tried to control TSO size, but did this at the wrong place (sendmsg() time) At sendmsg() time, we might have a pessimistic view of flow rate, and we end up building very small skbs (with 2 MSS per skb). This is bad because : - It sends small TSO packets even in Slow Start where rate quickly increases. - It tends to make socket write queue very big, increasing tcp_ack() processing time, but also increasing memory needs, not necessarily accounted for, as fast clones overhead is currently ignored. - Lower GRO efficiency and more ACK packets. Servers with a lot of small lived connections suffer from this. Lets instead fill skbs as much as possible (64KB of payload), but split them at xmit time, when we have a precise idea of the flow rate. skb split is actually quite efficient. Patch looks bigger than necessary, because TCP Small Queue decision now has to take place after the eventual split. As Neal suggested, introduce a new tcp_tso_autosize() helper, so that tcp_tso_should_defer() can be synchronized on same goal. Rename tp->xmit_size_goal_segs to tp->gso_segs, as this variable contains number of mss that we can put in GSO packet, and is not related to the autosizing goal anymore. Tested: 40 ms rtt link nstat >/dev/null netperf -H remote -l -2000000 -- -s 1000000 nstat | egrep "IpInReceives|IpOutRequests|TcpOutSegs|IpExtOutOctets" Before patch : Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/s 87380 2000000 2000000 0.36 44.22 IpInReceives 600 0.0 IpOutRequests 599 0.0 TcpOutSegs 1397 0.0 IpExtOutOctets 2033249 0.0 After patch : Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 2000000 2000000 0.36 44.27 IpInReceives 221 0.0 IpOutRequests 232 0.0 TcpOutSegs 1397 0.0 IpExtOutOctets 2013953 0.0 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09bury memcpy_toiovec()Al Viro
no users left Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09skb_copy_datagram_iovec() can dieAl Viro
no callers other than itself. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09ppp_read(): switch to skb_copy_datagram_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09switch memcpy_to_msg() and skb_copy{,_and_csum}_datagram_msg() to primitivesAl Viro
... making both non-draining. That means that tcp_recvmsg() becomes non-draining. And _that_ would break iscsit_do_rx_data() unless we a) make sure tcp_recvmsg() is uniformly non-draining (it is) b) make sure it copes with arbitrary (including shifted) iov_iter (it does, all it uses is iov_iter primitives) c) make iscsit_do_rx_data() initialize ->msg_iter only once. Fortunately, (c) is doable with minimal work and we are rid of one the two places where kernel send/recvmsg users would be unhappy with non-draining behaviour. Actually, that makes all but one of ->recvmsg() instances iov_iter-clean. The exception is skcipher_recvmsg() and it also isn't hard to convert to primitives (iov_iter_get_pages() is needed there). That'll wait a bit - there's some interplay with ->sendmsg() path for that one. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09first fruits - kill l2cap ->memcpy_fromiovec()Al Viro
Just use copy_from_iter(). That's what this method is trying to do in all cases, in a very convoluted fashion. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09put iov_iter into msghdrAl Viro
Note that the code _using_ ->msg_iter at that point will be very unhappy with anything other than unshifted iovec-backed iov_iter. We still need to convert users to proper primitives. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09vmci: propagate msghdr all way down to __qp_memcpy_from_queue()Al Viro
... and switch it to memcpy_to_msg() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09switch l2cap ->memcpy_fromiovec() to msghdrAl Viro
it'll die soon enough - now that kvec-backed iov_iter works regardless of set_fs(), both instances will become copy_from_iter() as soon as we introduce ->msg_iter... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09switch tcp_sock->ucopy from iovec (ucopy.iov) to msghdr (ucopy.msg)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09ip_generic_getfrag, udplite_getfrag: switch to passing msghdrAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09ipv6 equivalent of "ipv4: Avoid reading user iov twice after ↵Al Viro
raw_probe_proto_opt" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09raw.c: stick msghdr into raw_frag_vecAl Viro
we'll want access to ->msg_iter Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09Merge branch 'iov_iter' into for-davem-2Al Viro
2014-12-09chelsio: fix misspelling of current function in stringJulia Lawall
Replace a misspelled function name by %s and then __func__. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09hp100: fix misspelling of current function in stringJulia Lawall
Replace a misspelled function name by %s and then __func__. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09uli526x: fix misspelling of current function in stringJulia Lawall
Replace a misspelled function name by %s and then __func__. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09isdn: fix misspelling of current function in stringJulia Lawall
Replace a misspelled function name by %s and then __func__. In the first case, the print is just dropped, because kmalloc itself does enough error reporting. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09dmfe: fix misspelling of current function in stringJulia Lawall
The function name contains cleanup, not clean. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "Here's the usual mixed bag of arm64 updates, also including some related EFI changes (Acked by Matt) and the MMU gather range cleanup (Acked by you). Changes include: - support for alternative instruction patching from Andre - seccomp from Akashi - some AArch32 instruction emulation, required by the Android folks - optimisations for exception entry/exit code, cmpxchg, pcpu atomics - mmu_gather range calculations moved into core code - EFI updates from Ard, including long-awaited SMBIOS support - /proc/cpuinfo fixes to align with the format used by arch/arm/ - a few non-critical fixes across the architecture" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (70 commits) arm64: remove the unnecessary arm64_swiotlb_init() arm64: add module support for alternatives fixups arm64: perf: Prevent wraparound during overflow arm64/include/asm: Fixed a warning about 'struct pt_regs' arm64: Provide a namespace to NCAPS arm64: bpf: lift restriction on last instruction arm64: Implement support for read-mostly sections arm64: compat: align cacheflush syscall with arch/arm arm64: add seccomp support arm64: add SIGSYS siginfo for compat task arm64: add seccomp syscall for compat task asm-generic: add generic seccomp.h for secure computing mode 1 arm64: ptrace: allow tracer to skip a system call arm64: ptrace: add NT_ARM_SYSTEM_CALL regset arm64: Move some head.text functions to executable section arm64: jump labels: NOP out NOP -> NOP replacement arm64: add support to dump the kernel page tables arm64: Add FIX_HOLE to permanent fixed addresses arm64: alternatives: fix pr_fmt string for consistency arm64: vmlinux.lds.S: don't discard .exit.* sections at link-time ...
2014-12-09macvlan: play well with ipvlan deviceMahesh Bandewar
If device is already used as an ipvlan port then refuse to use it as a macvlan port at early stage of port creation. thost1:~# ip link add link eth0 ipvl0 type ipvlan thost1:~# echo $? 0 thost1:~# ip link add link eth0 mvl0 type macvlan RTNETLINK answers: Device or resource busy thost1:~# echo $? 2 thost1:~# Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09ipvlan: move the device check function into netdevice.hMahesh Bandewar
Move the port check [ipvlan_dev_master()] and device check [ipvlan_dev_slave()] functions to netdevice.h and rename them netif_is_ipvlan_port() and netif_is_ipvlan() resp. to be consistent with macvlan api naming. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09ipvlan: play well with macvlan deviceMahesh Bandewar
If a device is already a macvlan port then refuse to use it as an ipvlan port in the early stage of port creation. thost1:~# ip link add link eth0 mvl0 type macvlan thost1:~# echo $? 0 thost1:~# ip link add link eth0 ipvl0 type ipvlan RTNETLINK answers: Device or resource busy thost1:~# echo $? 2 thost1:~# Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09netdevice: Add a function to check macvlan portMahesh Bandewar
Similar to a check for macvlan device, netif_is_macvlan(), add another function to check if a device is used as macvlan port. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09dst: no need to take reference on DST_NOCACHE dstsHannes Frederic Sowa
Since commit f8864972126899 ("ipv4: fix dst race in sk_dst_get()") DST_NOCACHE dst_entries get freed by RCU. So there is no need to get a reference on them when we are in rcu protected sections. Cc: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Reviewed-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09dummy: add support for ethtool get_drvinfoFlavio Leitner
The command 'ethtool -i' is useful to find details about the interface like the device driver being used. This was missing for dummy driver. Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09bnx2x: Implement ndo_gso_check()Joe Stringer
Use vxlan_gso_check() to advertise offload support for this NIC. Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/mm: Eliminate memset after alloc_bootmem_pages nubus: Remove superfluous interrupt disable/restore
2014-12-09Documentation (ixgbe.txt): use a decimal address.Rami Rosen
This patch fixes the erronous usage of an hexadecimal address in the example, by replacing it with a decimal address. Signed-off-by: Rami Rosen <ramirose@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09openvswitch: set correct protocol on route lookupJiri Benc
Respect what the caller passed to ovs_tunnel_get_egress_info. Fixes: 8f0aad6f35f7e ("openvswitch: Extend packet attribute for egress tunnel info") Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09macvlan: allow setting LRO independently of lower deviceMichal Kubeček
Since commit fbe168ba91f7 ("net: generic dev_disable_lro() stacked device handling"), dev_disable_lro() zeroes NETIF_F_LRO feature flag first for a macvlan device and then for its lower device. As an attempt to set NETIF_F_LRO to zero is ignored, dev_disable_lro() issues a warning and taints kernel. Allowing NETIF_F_LRO to be set independently of the lower device consists of three parts: - add the flag to hw_features to allow toggling it - allow setting it to 0 even if lower device has the flag set - add the flag to MACVLAN_FEATURES to restore copying from lower device on macvlan creation Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09i40e/i40evf: Convert macro to static inlineJeff Kirsher
Inline functions are preferred over macros when they can be used interchangeably. CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: add to NVM update debug messageShannon Nelson
Add a little more state context to an NVM update debug message. Change-ID: I512160259052bcdbe5bdf1adf403ab2bf7984970 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: check for AQ timeout in aq_rc decodeShannon Nelson
Decoding the AQ return code is great except when the AQ send timed out and there's no return code set. This changes the handy decoder interface to help catch and properly report the condition as a useful errno rather than returning a misleading '0'. Change-ID: I07a1f94f921606da49ffac7837bcdc37cd8222eb Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: poll on NVM semaphore only if not other errorShannon Nelson
Only poll on the NVM semaphore if there's time left on a previous reservation. Also, add a little more info to debug messages. Change-ID: I2439bf870b95a28b810dcb5cca1c06440463cf8a Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: fix up NVM update sm error handlingShannon Nelson
The state transitions after an error were not managed well, so these changes get us back to the INIT state or don't transition out of the INIT state after most errors. Change-ID: I90aa0e4e348dc4f58cbcdce9c5d4b7fd35981c6c Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Michal Kosiarz <michal.kosiarz@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: set max limit for access pollingShannon Nelson
Don't bother trying to set a smaller timeout on the polling, just simplify the code and always use the max limit. Also, rename a variable for clarity and fix a comment. Change-ID: I0300c3562ccc4fd5fa3088f8ae52db0c1eb33af5 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Michal Kosiarz <michal.kosiarz@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: remove unused nvm_semaphore_waitShannon Nelson
The nvm_semaphore_wait field is set but never used, so let's just get rid of it. Change-ID: I2107bd29b69f99b1a61d7591d087429527c9d8fa Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Michal Kosiarz <michal.kosiarz@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: init NVM update state on adminq initShannon Nelson
The adminq init is run after the EMPR that is triggered by the NVM update. The final write command will cause the reset and will want to wait for the ARQ event that signals the end of the update, but the reset precludes the event being sent. The state is probably already at INIT, but we set it so here anyway, and clear the release_on_done flag as well. Change-ID: Ie9d724a39e71f988741abc3d51b4cb198c7e0272 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Michal Kosiarz <michal.kosiarz@intel.com> Acked-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: add range check to i40e_aq_rc_to_posixShannon Nelson
Just to be sure, add a range check to avoid any possible array index-out-of-bound issues. CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Change-ID: I9323bee6732c2a47599816e1d6c6b3a1f8dcbf54 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Michal Kosiarz <michal.kosiarz@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: rework debug messages for NVM updateShannon Nelson
Rework the debug messages in the NVM update state machine so that we can turn them on and off dynamically rather than forcing a recompile/reload. These can now be turned on with something like: ethtool -s eth1 msglvl 0xf000008f and off with: ethtool -s eth1 msglvl 0xf000000f The high 0xf0000000 gets the driver's attention that we want to change the internal debug flags, and the 0x80 bit is the NVM debug. Change-ID: I5efb9039400304b29a0fd6ddea3f47bb362e6661 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: let firmware catch the NVM busy errorShannon Nelson
The NVM update operations take time finish asynchronously, and follow-on update requests need to wait for the current one to finish. Early firmware didn't handle this well, so the code had to track the busy state. The released firmware handles the busy state correctly, returning I40E_AQ_RC_EBUSY if an update is still in progress, so the code no longer needs to track this. Change-ID: I6e6b4adc26d6dcc5fd7adfee5763423858a7d921 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: better error messages for NVM update issuesShannon Nelson
Add more detail to the NVM update error messages so folks have a better chance at diagnosing issues without having to resort to heroic measures to reproduce an issue. Change-ID: I270d1a9c903baceaef0bebcc55d29108ac08b0bd Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: clear NVM update state on ethtool testShannon Nelson
Once in a great while the NVMUpdate tools and the driver get out of phase with each other. This gives us a way to reset things without having to unload the driver. Change-ID: I353f688236249a666a90ba3e7233e0ed8c1a04e9 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09Merge tag 'nios2-v3.19-rc1' of git://git.rocketboards.org/linux-socfpga-nextLinus Torvalds
Pull Altera Nios II processor support from Ley Foon Tan: "Here is the Linux port for Nios II processor (from Altera) arch/nios2/ tree for v3.19. The patchset has been discussed on the kernel mailing lists since April and has gone through 6 revisions of review. The additional changes since then have been mostly further cleanups and fixes when merged with other trees. The arch code is in arch/nios2 and one asm-generic change (acked by Arnd)" Arnd Bergmann says: "I've reviewed the architecture port in the past and it looks good in its latest version" Acked-by: Arnd Bergmann <arnd@arndb.de> * tag 'nios2-v3.19-rc1' of git://git.rocketboards.org/linux-socfpga-next: (40 commits) nios2: Make NIOS2_CMDLINE_IGNORE_DTB depend on CMDLINE_BOOL nios2: Add missing NR_CPUS to Kconfig nios2: asm-offsets: Remove unused definition TI_TASK nios2: Remove write-only struct member from nios2_timer nios2: Remove unused extern declaration of shm_align_mask nios2: include linux/type.h in io.h nios2: move include asm-generic/io.h to end of file nios2: remove include asm-generic/iomap.h from io.h nios2: remove unnecessary space before define nios2: fix error handling of irq_of_parse_and_map nios2: Use IS_ENABLED instead of #ifdefs to check config symbols nios2: Build infrastructure Documentation: Add documentation for Nios2 architecture MAINTAINERS: Add nios2 maintainer nios2: ptrace support nios2: Module support nios2: Nios2 registers nios2: Miscellaneous header files nios2: Cpuinfo handling nios2: Time keeping ...
2014-12-09net: sched: cls_basic: fix error path in basic_change()Jiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09net: macb: Remove obsolete comment from KconfigJames Byrne
The Kconfig file says that Gigabit mode is not supported, but it has been supported since commit 140b7552fdff04bbceeb842f0e04f0b4015fe97b ("net/macb: Add support for Gigabit Ethernet mode"). Signed-off-by: James Byrne <james.byrne@origamienergy.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09net: ethernet: rocker: Add dependency to CONFIG_BRIDGE in KconfigAndreas Ruprecht
In a configuration with CONFIG_BRIDGE set to 'm' and CONFIG_ROCKER set to 'y', undefined references occur at link time: > drivers/built-in.o: In function `rocker_port_fdb_learn_work': > /home/jim/linux/drivers/net/ethernet/rocker/rocker.c:3014: undefined > reference to `br_fdb_external_learn_del' > /home/jim/linux/drivers/net/ethernet/rocker/rocker.c:3016: undefined > reference to `br_fdb_external_learn_add' This patch fixes these by declaring CONFIG_ROCKER as being dependent on CONFIG_BRIDGE. Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Andreas Ruprecht <rupran@einserver.de> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 19:07:55 +0000