summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-10-10arm64: dts: imx8mm-venice-gw73xx: add TPM deviceTim Harvey
Add the TPM device found on the GW73xx revision F PCB. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8mp-verdin: Remove invalid property from eqosFabio Estevam
Per nxp,dwmac-imx.yaml, it is not valid to pass 'phy-supply'. The reg_module_eth1phy regulator is marked with 'regulator-always-on', so it is safe to remove it from the eqos node. Remove it to fix the following schema warning: imx8mp-verdin-nonwifi-dahlia.dtb: ethernet@30bf0000: Unevaluated properties are not allowed ('phy-supply' was unexpected) from schema $id: http://devicetree.org/schemas/net/nxp,dwmac-imx.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8qm-ss-img: Fix jpegenc compatible entryFabio Estevam
The first compatible entry for the jpegenc should be 'nxp,imx8qm-jpgenc'. Change it accordingly to fix the following schema warning: imx8qm-apalis-eval.dtb: jpegenc@58450000: compatible: 'oneOf' conditional failed, one must be fixed: 'nxp,imx8qm-jpgdec' is not one of ['nxp,imx8qxp-jpgdec', 'nxp,imx8qxp-jpgenc'] 'nxp,imx8qm-jpgenc' was expected 'nxp,imx8qxp-jpgdec' was expected Fixes: 5bb279171afc ("arm64: dts: imx8: Add jpeg encoder/decoder nodes") Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx93: Fix the dmas entries orderFabio Estevam
Per fsl-lpuart.yaml, the dmas and dma-names entries should be 'rx' followed by 'tx'. Change the order to fix the following schema warning: imx93-11x11-evk.dtb: serial@44380000: dma-names:0: 'rx' was expected from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# imx93-11x11-evk.dtb: serial@44380000: dma-names:1: 'tx' was expected from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8mm-venice-gw790: Pass GSC address/size-cellsFabio Estevam
Per gateworks-gsc.yaml, #address-cells and #size-cells are mandatory properties. Pass them to fix the following schema warning: imx8mm-venice-gw7903.dtb: gsc@20: '#address-cells' is a required property from schema $id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml# imx8mm-venice-gw7903.dtb: gsc@20: '#size-cells' is a required property from schema $id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8dxl: Pass fsl,imx8dxl-sc-wdtFabio Estevam
Pass 'fsl,imx8dxl-sc-wdt' to fix the following schema warning: system-controller: watchdog:compatible:0: 'fsl,imx8qxp-sc-wdt' was expected from schema $id: http://devicetree.org/schemas/firmware/fsl,scu.yaml# system-controller: watchdog:compatible: ['fsl,imx-sc-wdt'] is too short from schema $id: http://devicetree.org/schemas/firmware/fsl,scu.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8dxl: Pass fsl,imx8dxl-sc-thermalFabio Estevam
Pass 'fsl,imx8dxl-sc-thermal' to fix the following schema warning: system-controller: thermal-sensor:compatible:0: 'fsl,imx8qxp-sc-thermal' was expected from schema $id: http://devicetree.org/schemas/firmware/fsl,scu.yaml# system-controller: thermal-sensor:compatible: ['fsl,imx-sc-thermal'] is too short from schema $id: http://devicetree.org/schemas/firmware/fsl,scu.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8dxl: Remove wakeup-irqFabio Estevam
wakeup-irq is not documented, and not used anywhere. Remove it. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8dxl: Pass fsl,imx8dl-scu-pdFabio Estevam
Pass 'fsl,imx8dl-scu-pd' to fix the following schema warning: system-controller: power-controller:compatible:0: 'fsl,scu-pd' is not one of ['fsl,imx8qm-scu-pd', 'fsl,imx8qxp-scu-pd'] from schema $id: http://devicetree.org/schemas/firmware/fsl,scu.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8qm-mek: enable 8qm lpuart2 and lpuart3Frank Li
Enable uart2 and uart3 for imx8qm-mek board. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8qxp-mek: enable 8qxp lpuart2 and lpuart3Frank Li
Enable uart2 and uart3 for imx8qxp-mek board. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8: update lpuart[0..3] irq numberFrank Li
Original irq number combined UART irq and DMA irq. These doesn't match uart driver and dma engine's expection. Update to the irq numbers, which just uart can trigger. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8qm: Update edma channel for uart[0..3]Frank Li
imx8qm have difference dma channel number for uart[0..3]. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8: add edma for uart[0..3]Frank Li
Add dma support uart[0..3]. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: imx8: add edma[0..3]Frank Li
edma<n> is missed, add them. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: ls208xa: use a pseudo-bus to constrain usb dma sizeLaurentiu Tudor
Wrap the usb controllers in an intermediate simple-bus and use it to constrain the dma address size of these usb controllers to the 40b that they generate toward the interconnect. This is required because the SoC uses 48b address sizes and this mismatch would lead to smmu context faults [1] because the usb generates 40b addresses while the smmu page tables are populated with 48b wide addresses. [1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002000010 xhci-hcd xhci-hcd.0.auto: irq 108, io mem 0x03100000 xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0xffffffb000, fsynr=0x0, cbfrsynra=0xc01, cb=3 Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10arm64: dts: freescale: add phyGATE-Tauri i.MX 8M Mini SupportYannic Moog
phyGATE-Tauri uses a phyCORE-i.MX8MM SoM. Add device tree for the board. Signed-off-by: Yannic Moog <y.moog@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10Merge tag 'imx-fixes-6.6' into imx/dt64Shawn Guo
i.MX fixes for 6.6: - A couple of i.MX8MP device tree changes from Adam Ford to fix clock configuration regressions caused by 16c984524862 ("arm64: dts: imx8mp: don't initialize audio clocks from CCM node"). - Fix pmic-irq-hog GPIO line in imx93-tqma9352 device tree. - Fix a mmemory leak with error handling path of imx_dsp_setup_channels() in imx-dsp driver. - Fix HDMI node in imx8mm-evk device tree. - Add missing clock enable functionality for imx8mm_soc_uid() function in soc-imx8m driver. - Add missing imx8mm-prt8mm.dtb build target.
2023-10-10dt-bindings: arm: fsl: Add TQ-Systems LS1088 based boardsGregor Herburger
TQMLS1088a uses a common board layout with TQMLS1043A/TQMLS1046A. MBLS10XXA is a starterkit baseboard usable for these SOMs. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10dt-bindings: arm: fsl: Add TQ-Systems LS1043A/LS1046A based boardsGregor Herburger
TQMLS1043A and TQMLS1046A use the LS1043A LS1046A SOC on a common layout. MBLS10XXA is a starterkit baseboard usable for both SOMs. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10dt-bindings: arm: Add SolidRun LX2162A SoM & Clearfog BoardJosua Mayer
SolidRun now have 2 product lines around NXP Layerscape SoC: - LX2160A COM Express 7 - LX2162A System on Module LX2162 is a smaller package and reduced feature set to LX2160A; LX2162 SoM is also a smaller form factor and reduced feature set to CEX. Since both product lines are physically incompatible, the existing group "SolidRun LX2160A based Boards" has been renamed to include "CEX" in its name, meaning products based on LX2160A COM Express Module, following this pattern: "solidrun,<board>", "solidrun,lx2160a-cex", "fsl,lx2160a" Add DT compatible for both SolidRun LX2162A SoM, and LX2162 Clearfog boards to a new group based on LX2162A SoM, following this pattern: "solidrun,<board>", "solidrun,lx2162a-som", "fsl,lx2160a" Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-09ARM: dts: ixp4xx: Use right restart keycodeLinus Walleij
The "reset" key on a few IXP4xx routers were sending KEY_ESC but what we want to send is KEY_RESTART which will make OpenWrt and similar userspace do a controlled reboot. Link: https://lore.kernel.org/r/20230908-ixp4xx-dts-v1-2-98d36264ed6d@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-10-09ARM: dts: ixp4xx-nslu2: Enable write on flashLinus Walleij
To upgrade the firmware and similar, the flash needs write access. Link: https://lore.kernel.org/r/20230908-ixp4xx-dts-v1-1-98d36264ed6d@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-10-09ARM: dts: ixp4xx: Add USRobotics USR8200 device treeLinus Walleij
This is a USRobotics NAS/Firewall/router that has been supported by OpenWrt in the past. It had dedicated users so let's get it properly supported. Some debugging and fixing was provided by Howard Harte. Link: https://lore.kernel.org/r/20231007-ixp4xx-usr8200-v1-1-aded3d6ff6f1@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-10-09ARM: dts: Use only the Linksys compatible for nowLinus Walleij
The Gemtek users can just use the Linksys device tree, triplet compatible is overdoing it. Link: https://lore.kernel.org/r/20231007-ixp4xx-usr8200-v3-3-ec46edd1ff0e@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-10-09dt-bindings: arm: List more IXP4xx devicesLinus Walleij
The ixp4xx bindings are lacking some of the devices we have out there in the wild, so let's add them. Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231007-ixp4xx-usr8200-v3-2-ec46edd1ff0e@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-10-09dt-bindings: Add vendor prefixesLinus Walleij
These vendor prefixes are used by some routers supported by e.g. OpenWrt. - ADI Engineering is a US telecom equipment company. - Arcom Controllers is a US manufacturer of repeaters. - Freecom Gmbh is a german telecom equipment company. - Gemtek Technology is a Taiwan telecom company. - Gateway Communications was a telecommunication company, now acquired by HKT Limited/PCCW. - Goramo Gorecki is a privately owned Polish telecom company. - U.S. Robotics Corporation, known through their brand name USRobotics is generally referred to as "USR" so use this prefix for the company's device tree bindings. Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231007-ixp4xx-usr8200-v3-1-ec46edd1ff0e@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-10-09ARM: dts: imx27-phytec: Use eeprom as the node nameFabio Estevam
Node names should be generic, so use 'eeprom' to fix the following schema warnings: at24@52: $nodename:0: 'at24@52' does not match '^eeprom@[0-9a-f]{1,2}$' from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-09ARM: dts: imx51: Remove invalid sahara compatibleFabio Estevam
Per fsl-imx-sahara.yaml, there should not be a 'fsl,imx51-sahara' compatible. Remove it to fix the following schema warning: imx51-apf51.dtb: crypto@83ff8000: compatible: ['fsl,imx53-sahara', 'fsl,imx51-sahara'] is too long from schema $id: http://devicetree.org/schemas/crypto/fsl-imx-sahara.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-09dt-bindings: arm: fsl: add phyGATE-Tauri-L boardYannic Moog
Add dt compatible for the phyGATE-Tauri-L board. It uses the phyCORE-i.MX8MM SoM Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Yannic Moog <y.moog@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-07ARM: dts: omap4-embt2ws: Fix pinctrl single node name warningTony Lindgren
Looks like one pinctrl single binding warning sneaked in while we were implementing the yaml binding. Let's fix the 'pinmux-wl12xx-gpio' does not match any of the regexes warning by adding -pins suffix. Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-10-07ARM: dts: motorola-mapphone: Add mdm6600 sleep pinsTony Lindgren
The sleep pins never got added earlier probably because the driver was not behaving correctly with the sleep pins. We need the sleep pins to prevent the modem from waking up on it's own if the reset pin glitches in deeper SoC idle states. Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Message-ID: <20230911035828.36984-1-tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-10-07ARM: dts: am3517: Configure ethernet aliasAdam Ford
The AM3517 has one ethernet controller called davinci_emac. Configuring the alias allows the MAC address to be passed from the bootloader to Linux. Signed-off-by: Adam Ford <aford173@gmail.com> Message-ID: <20230906095143.99806-2-aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-10-07ARM: dts: am3517-evm: Enable Ethernet PHY InterruptAdam Ford
The Ethernet PHY interrupt pin is routed to GPIO_58. Create a PHY node to configure this GPIO for the interrupt to avoid polling. Signed-off-by: Adam Ford <aford173@gmail.com> Message-ID: <20231005000402.50879-2-aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-10-07ARM: dts: am3517-evm: Fix LED3/4 pinmuxAdam Ford
The pinmux for LED3 and LED4 are incorrectly attached to the omap3_pmx_core when they should be connected to the omap3_pmx_wkup pin mux. This was likely masked by the fact that the bootloader used to do all the pinmuxing. Fixes: 0dbf99542caf ("ARM: dts: am3517-evm: Add User LEDs and Pushbutton") Signed-off-by: Adam Ford <aford173@gmail.com> Message-ID: <20231005000402.50879-1-aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-10-07ARM: dts: omap3-gta04: Drop superfluous omap36xx compatibleAndreas Kemnade
Drop omap36xx compatible as done in other omap3630 devices. This has apparently fallen through the lattice. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Message-ID: <20231004065323.2408615-1-andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-10-07ARM: dts: omap: omap4-embt2ws: Add IMU at control unitAndreas Kemnade
Add also the level-shifter flag to avoid probe failure in magnetometer probe. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Message-ID: <20230927173245.2151083-4-andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-10-05arm64: dts: renesas: ebisu: Document Ebisu-4D supportWolfram Sang
Document properly that Ebisu-support includes the Ebisu-4D variant, so there won't be confusion what happened with support for this board. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20231004152751.3917-1-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05arm64: dts: renesas: Add R-Car S4 Starter Kit supportKuninori Morimoto
Add initial support for the R-Car S4 Starter Kit with R8A779F4 SoC support. Based on a patch in the BSP. Signed-off-by: Michael Dege <michael.dege@renesas.com> Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Co-developed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/87pm1wfn8z.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05arm64: dts: renesas: Add Renesas R8A779F4 SoC supportKuninori Morimoto
The R8A779F4 (R-Car S4-8) SoC is an updated version of R8A779F0. Add support for it, using the r8a779f0 .dtsi internally. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/87r0mcfn95.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05arm64: dts: renesas: Add initial device tree for RZ/G3S SMARC EVK boardClaudiu Beznea
Add the initial device tree for the Renesas RZ/G3S SMARC EVK board. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929053915.1530607-28-claudiu.beznea@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05arm64: dts: renesas: Add initial device tree for RZ SMARC Carrier-II BoardClaudiu Beznea
Add the initial device tree for the RZ SMARC Carrier-II. At the moment it contains only the serial interface. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929053915.1530607-26-claudiu.beznea@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05arm64: dts: renesas: Add initial support for RZ/G3S SMARC SoMClaudiu Beznea
Add initial support for the RZ/G3S SMARC SoM. The following devices available on the SoM are added to this initial device tree: - RZ/G3S SoC: Renesas R9A08G045S33GBG - Clock Generator (only 24MHz output): Renesas 5L35023B - 1GiB LPDDR4 SDRAM: Micron MT53D512M16D1DS-046 - 64GB eMMC Flash (though SD ch0): Micron MTFC64GBCAQTC SD channel 0 of RZ/G3S is connected to an uSD card interface and an eMMC. The selection b/w them is done through a hardware switch. The DT will select b/w uSD and eMMC through the SW_SD0_DEV_SEL build flag. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929053915.1530607-25-claudiu.beznea@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05arm64: dts: renesas: Add initial DTSI for RZ/G3S SoCClaudiu Beznea
Add the initial DTSI for the RZ/G3S SoC. The files in this commit have the following meaning: - r9a08g045.dtsi: RZ/G3S family SoC common parts - r9a08g045s33.dtsi: RZ/G3S R0A08G045S33 SoC specific parts Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929053915.1530607-23-claudiu.beznea@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05Merge tag 'renesas-r9a08g045-dt-binding-defs-tag' into renesas-dts-for-v6.7Geert Uytterhoeven
Renesas RZ/G3S DT Binding Definitions Clock definitions for the Renesas RZ/G3S (R9A08G045) SoC, shared by driver and DT source files.
2023-10-05riscv: dts: renesas: rzfive-smarc: Enable the blocks which were explicitly ↵Lad Prabhakar
disabled Now that noncoherent dma support for the RZ/Five SoC has been added, enable the IP blocks which were disabled on the RZ/Five SMARC. This adds support for the below peripherals: * Ethernet * DMAC * SDHI * USB * RSPI * SSI Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929000704.53217-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05riscv: dts: renesas: r9a07g043f: Add dma-noncoherent propertyLad Prabhakar
RZ/Five is a noncoherent SoC so to indicate this add dma-noncoherent property to RZ/Five SoC DTSI. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929000704.53217-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05riscv: dts: renesas: r9a07g043f: Add L2 cache nodeLad Prabhakar
Add L2 cache node for RZ/Five SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929000704.53217-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05ARM: dts: renesas: bockw: Add FLASH nodeGeert Uytterhoeven
Add a device node for the Spansion S29GL512P NOR FLASH on the Bock-W development board. This FLASH resides in the external address space of the Local Bus State Controller. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/45e6343ae07ef1add8bba5e8281ef9e6a977c573.1694768311.git.geert+renesas@glider.be
2023-10-05arm64: dts: renesas: rz-smarc: Use versa3 clk for audio mclkBiju Das
Currently audio mclk uses a fixed clk of 11.2896MHz (multiple of 44.1kHz). Replace this fixed clk with the programmable versa3 clk that can provide the clocking to support both 44.1kHz (with a clock of 11.2896MHz) and 48kHz (with a clock of 12.2880MHz), based on audio sampling rate for playback and record. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230825090518.87394-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
generated by cgit (git 2.34.1) at 2025-09-19 06:09:00 +0000