summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-10-05Merge tag 'clk-fixes-for-linus' of ↵Geert Uytterhoeven
https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux into renesas-dts-for-v6.7 Adding versa3 clock generator nodes to DTS depends on the fixed clock index handling: - Fix the binding for versaclock3 that was introduced this merge window so we know what the values are for clk consumers
2023-10-05dt-bindings: soc: renesas: Document R-Car S4 Starter KitKuninori Morimoto
Add "renesas,s4sk" which targets the Renesas R-Car S4 Starter Kit board. Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/87sf6sfn9i.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05dt-bindings: soc: renesas: Document SMARC Carrier-II EVKClaudiu Beznea
Document the Renesas SMARC Carrier-II EVK board which is based on the Renesas RZ/G3S SMARC SoM. The SMARC Carrier-II EVK consists of an RZ/G3S SoM module and a SMARC Carrier-II carrier board; the SoM module sits on top of the carrier board. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929053915.1530607-27-claudiu.beznea@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05dt-bindings: soc: renesas: Document RZ/G3S SMARC SoMClaudiu Beznea
Document the Renesas RZ/G3S SMARC SoM board which is based on the Renesas RZ/G3S (R9A08G045S33) SoC. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929053915.1530607-24-claudiu.beznea@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-10-05dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3S SoCClaudiu Beznea
Add documentation for the RZ/G3S CPG. The RZ/G3S CPG module is almost identical to the one available in RZ/G2{L,UL}, the exception being some core clocks as follows: - The SD clock is composed of a mux and a divider, and the divider has some limitations (div = 1 cannot be set if mux rate is 800MHz), - There are 3 SD clocks, - The OCTA and TSU clocks are specific to RZ/G3S, - PLL1/4/6 are specific to RZ/G3S with its own computation formula. Even with this RZ/G3S could use the same bindings as RZ/G2L. Along with documentation bindings for the RZ/G3S (R9A08G045) Clock Pulse Generator (CPG) core clocks, module clocks and resets were added. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929053915.1530607-13-claudiu.beznea@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-09-29ARM: dts: at91: sam9x60_curiosity: Add mandatory dt property for RTTTudor Ambarus
atmel,rtt-rtc-time-reg is a mandatory property and encodes the GPBR register used to store the time base when the RTT is used as an RTC. Align the RTT with what's currently done for sam9x60ek and sama7g5ek, and enable it by default even if RTC is also enabled. Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> [nicolas.ferre@microchip.com: adapt to newer kernel] Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20230928143644.208515-1-nicolas.ferre@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-09-29ARM: dts: sunxi: add support for Anbernic RG-NanoChris Morgan
The Anbernic RG-Nano is a small portable game device based on the Allwinner V3s SoC. It has GPIO buttons on the face and side for input, a single mono speaker, a 240x240 SPI controlled display, a USB-C OTG port, an SD card slot for booting, and 64MB of RAM included in the SoC. There does not appear to be a crystal feeding the internal RTC so it does not keep proper time (for me it ran 8 hours slow in a 24 hour period). External RTC works just fine. Working/Tested: - SDMMC - UART (for debugging) - Buttons - Charging/battery/PMIC - Speaker - RTC (external RTC) - USB - Display Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20230929144441.3409-5-macroalpha82@gmail.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-29dt-bindings: arm: sunxi: add Anbernic RG-NanoChris Morgan
The Anbernic RG-Nano is a portable handheld console from Anbernic which uses the Allwinner V3s SoC. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20230929144441.3409-4-macroalpha82@gmail.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-29ARM: dts: sun8i: v3s: add EHCI and OHCI to v3s dtsChris Morgan
Add the EHCI and OHCI controller to the Allwinner v3s to support using USB in host mode. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230929144441.3409-3-macroalpha82@gmail.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-29arm: dts: sun8i: V3s: Add pinctrl for pwmChris Morgan
Add pinctrl nodes for pwm0 and pwm1. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230929144441.3409-2-macroalpha82@gmail.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-29ARM: dts: at91: sama5d29_curiosity: Add device tree for sama5d29_curiosity boardMihai Sain
Add initial device tree file for sama5d29_curiosity board. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20230919124606.26898-3-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-09-29dt-bindings: ARM: at91: Document Microchip SAMA5D29 CuriosityAndrei Simion
Document device tree binding of SAMA5D29 Curiosity, from Microchip. Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230919124606.26898-2-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-09-28Merge tag 'ux500-dts-for-armsoc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into soc/dt Ux500 device tree updates for v6.7: - Two fixes from Krzysztof fixing up DT properties on the touchscreen. * tag 'ux500-dts-for-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: st: href-tvk1281618: correct touchscreen syna,nosleep-mode ARM: dts: st: href-tvk1281618: fix touchscreen VIO supply Link: https://lore.kernel.org/r/CACRpkdZc5Yzsos2+gRPtCT-+ohmaV69ew5YFJLakD+9VFkrkfQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-28arm64: dts: Add AMD Pensando Elba SoC supportBrad Larson
Add AMD Pensando common and Elba SoC specific device nodes Signed-off-by: Brad Larson <blarson@amd.com> Link: https://lore.kernel.org/r/20230925195610.47971-5-blarson@amd.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-28dt-bindings: arm: add AMD Pensando boardsBrad Larson
Document the compatible for AMD Pensando Elba SoC boards. Signed-off-by: Brad Larson <blarson@amd.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230925195610.47971-2-blarson@amd.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-09-27ARM: dts: qcom: ipq8064: move keys and leds out of soc nodeKrzysztof Kozlowski
GPIO keys and LEDs are not part of the SoC, so move them to top-level to fix dtbs_check warnings like: qcom-ipq8064-rb3011.dtb: soc: gpio-keys: {'compatible': ['gpio-keys'], ... should not be valid under {'type': 'object'} from schema $id: http://devicetree.org/schemas/simple-bus.yaml# Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230924183914.51414-4-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27ARM: dts: qcom: mdm9615: populate vsdcc fixed regulatorKrzysztof Kozlowski
Fixed regulator put under "regulators" node will not be populated, unless simple-bus or something similar is used. Drop the "regulators" wrapper node to fix this. Fixes: 2c5e596524e7 ("ARM: dts: Add MDM9615 dtsi") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230924183914.51414-3-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27ARM: dts: qcom: apq8060: drop incorrect regulator-typeKrzysztof Kozlowski
regulator-fixed does not have a "regulator-type" property: qcom-apq8060-dragonboard.dtb: regulator-fixed: Unevaluated properties are not allowed ('regulator-type' was unexpected) Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230924183914.51414-2-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27ARM: dts: qcom: apq8064: drop incorrect regulator-typeKrzysztof Kozlowski
regulator-fixed does not have a "regulator-type" property: qcom-apq8064-ifc6410.dtb: regulator-ext-3p3v: Unevaluated properties are not allowed ('regulator-type' was unexpected) Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230924183914.51414-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27ARM: dts: qcom: sdx65: fix SDHCI clocks orderKrzysztof Kozlowski
Bindings expect clocks to be in different order: qcom-sdx65-mtp.dtb: mmc@8804000: clock-names:0: 'iface' was expected qcom-sdx65-mtp.dtb: mmc@8804000: clock-names:1: 'core' was expected Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230924183335.49961-2-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27ARM: dts: qcom: apq8064: drop label property from DSIKrzysztof Kozlowski
DSI node does not accept nor use "label" property: qcom-apq8064-asus-nexus7-flo.dtb: dsi@4700000: Unevaluated properties are not allowed ('label' was unexpected) Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230924183335.49961-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27ARM: qcom: msm8974: Add rpm-master-stats nodeMatti Lehtimäki
Add rpm-master-stats node for MSM8974 and the required RPM MSG RAM slices for memory access. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20230922003533.107835-3-matti.lehtimaki@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27ARM: qcom: msm8226: Add rpm-master-stats nodeMatti Lehtimäki
Add rpm-master-stats node for MSM8226 and the required RPM MSG RAM slices for memory access. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20230922003533.107835-2-matti.lehtimaki@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27ARM: dts: qcom: apq8026-samsung-matisse-wifi: Fix inverted hall sensorMatti Lehtimäki
Fix hall sensor GPIO polarity and also allow disabling the sensor. Remove unneeded interrupt. Fixes: f15623bda1dc ("ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 (SM-T530)") Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20230922011211.115234-1-matti.lehtimaki@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-27arm64: dts: qcom: apq8016-sbc: Add missing ADV7533 regulatorsStephan Gerhold
Add the missing regulator supplies to the ADV7533 HDMI bridge to fix the following dtbs_check warnings. They are all also supplied by pm8916_l6 so there is no functional difference. apq8016-sbc.dtb: bridge@39: 'dvdd-supply' is a required property apq8016-sbc.dtb: bridge@39: 'pvdd-supply' is a required property apq8016-sbc.dtb: bridge@39: 'a2vdd-supply' is a required property from schema display/bridge/adi,adv7533.yaml Fixes: 28546b095511 ("arm64: dts: apq8016-sbc: Add HDMI display support") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230922-db410c-adv7533-regulators-v1-1-68aba71e529b@gerhold.net Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-26ARM: dts: omap: omap4-embt2ws: Let IMU driver handle Magnetometer internallyAndreas Kemnade
Possibility to use the i2c gate is only for compatibility reasons, so avoid messing around with additional i2c busses. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Message-ID: <20230924222718.2038849-1-andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-26ARM: dts: am335x-pocketbeagle: add missing GPIO muxTrevor Woerner
Add the default MODE setting of a GPIO pin that was missing from the device tree (i.e. P2.20/gpio2_00). This is to ensure the GPIO pins match the pocketbeagle wiring expectations. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Message-ID: <20230822143051.7640-5-twoerner@gmail.com> [tony@atomide.com: leave out extra line break] Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-26ARM: dts: am335x-pocketbeagle: enable pruTrevor Woerner
Now that the PRU code is upstream and can be loaded via remoteproc, adjust the device tree to enable it and adjust the pin muxing so that the default setting of the pins matches what's is given on the silkscreen and/or pocketbeagle wiring. Caveat: In most cases, the silkscreen will indicate, for example, "PRU0.7", but it doesn't indicate whether that pin should be enabled for input or output. On the PRU a different MODE is used for input versus output. So it is unclear which mode to enable (MODE5 = output, MODE6 = input). In cases where there is a choice (PRU1.11, PRU0.7, PRU0.4, PRU0.1, PRU1.10, PRU0.6, PRU0.3, PRU0.2, and PRU0.5) output is assumed (MODE5). The remaining PRU silkscreen pins do not have a choice and are set as follows: PRU0.16 MODE5 input PRU0.15i MODE6 input Signed-off-by: Trevor Woerner <twoerner@gmail.com> Message-ID: <20230822143051.7640-4-twoerner@gmail.com> [tony@atomide.com: formatted description to fit 75 characters] Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-26ARM: dts: am335x-pocketbeagle: remove dependency cycleTrevor Woerner
Remove the self-referenceing "pinctrl-0" entry inside the pinmux clause. This eliminates the set of boot messages (one for each referenced pin) similar to the following: platform 44e10800.pinmux: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@10000/scm@0/pinmux@800/pinmux_P2_17_gpio Signed-off-by: Trevor Woerner <twoerner@gmail.com> Message-ID: <20230822143051.7640-3-twoerner@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-26ARM: dts: am335x-pocketbeagle: update LED informationTrevor Woerner
Add the "color" and "description" properties. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Message-ID: <20230822143051.7640-2-twoerner@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-26ARM: dts: omap4: embt2ws: add LEDAndreas Kemnade
Add LED since the driver is now available. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Message-ID: <20230819143109.471615-1-andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-09-25ARM: dts: st: href-tvk1281618: correct touchscreen syna,nosleep-modeKrzysztof Kozlowski
There is no syna,nosleep property in Synaptics RMI4 touchscreen: ste-hrefprev60-tvk.dtb: synaptics@4b: rmi4-f01@1: 'syna,nosleep' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-ID: <20230720115524.137944-2-krzysztof.kozlowski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-09-25ARM: dts: st: href-tvk1281618: fix touchscreen VIO supplyKrzysztof Kozlowski
According to bindings and Linux driver, there is no VDDIO but VIO supply: ste-hrefprev60-tvk.dtb: synaptics@4b: Unevaluated properties are not allowed ('vddio-supply' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-ID: <20230720115524.137944-1-krzysztof.kozlowski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-09-25arm64: dts: renesas: ulcb/kf: Use multi Component soundKuninori Morimoto
+-- ULCB -------------------+ |+--------+ +--------+| || SSI0| <---> |ak4613 || || SSI1| <---> | || || | +--------+| || | +--------+| || SSI2| <---> |HDMI || || | +--------+| || SSI3| <--+ | || SSI4| <-+| | |+--------+ || | +-------------||------------+ +-- Kingfisher -------------+ | || +--------+| | |+->|pcm3168a|| | +-->| || | +--------+| +---------------------------+ On UCLB/KF, we intuitively think we want to handle these as "2 Sound Cards": card0,0: 1st sound of ULCB (SSI0 - ak4613) card0,1: 2nd sound of ULCB (SSI2 - HDMI) card1,0: 1st sound of KF (SSI3 - pcm3168a) ^ ^ However, because of ASoC Component vs. Card framework limitations, we needed to handle this as "1 big Sound Card": card0,0: 1st sound of ULCB/KF (SSI0 - ak4613) card0,1: 2nd sound of ULCB/KF (SSI2 - HDMI) card0,2: 3rd sound of ULCB/KF (SSI3 - pcm3168a) ^ ^ Now ASoC supports multi Component, which allows us to handle "2 Sound Cards" such as "ULCB Sound Card" and "Kingfisher Sound Card", all ULCB/KF Audio dtsi can be updated. Note that this changes the Sound Card specification method from userland, especially for Kingfisher Sound. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/87fs382yhk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-09-25ARM: dts: renesas: rskrza1: Add FLASH nodesGeert Uytterhoeven
Add device nodes for the dual Spansion S25FL512S QSPI NOR FLASH and the Spansion S29GL512S CFI NOR FLASH on the RSK+RZA1 development board. The former is mapped directly through the SPI Multi I/O Bus Controller. The latter resides in the external address space of the Bus State Controller (BSC). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/17a221699da14639e72264ffa39d47592d470f9a.1693481518.git.geert+renesas@glider.be
2023-09-25ARM: dts: renesas: genmai: Add FLASH nodesGeert Uytterhoeven
Add device nodes for the dual Spansion S25FL512S QSPI NOR FLASH and the two Spansion S29GL512S CFI NOR FLASHes on the Genmai development board. The former is mapped directly through the SPI Multi I/O Bus Controller. The latter reside in the address space of the Bus State Controller (BSC). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/53c89c70c6b010702fd9ab5247e19986857671ba.1693481518.git.geert+renesas@glider.be
2023-09-25ARM: dts: renesas: wheat: Move Ethernet node to LBSCGeert Uytterhoeven
The SMSC LAN89218AQ Ethernet controller on the Wheat development board resides in the external address space of the Local Bus State Controller (LBSC). Move the Ethernet device node to reflect this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/a291c2750144df29e69824d5b9d76cbc11f613c1.1693481518.git.geert+renesas@glider.be
2023-09-25ARM: dts: renesas: blanche: Move Ethernet node to LBSCGeert Uytterhoeven
The SMSC LAN89218AQ Ethernet controller on the Blanche development board resides in the external address space of the Local Bus State Controller (LBSC). Move the Ethernet device node to reflect this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/457239047bc8b5deabf15d816043a89ab00db5ef.1693481518.git.geert+renesas@glider.be
2023-09-25ARM: dts: renesas: marzen: Move Ethernet node to LBSCGeert Uytterhoeven
The SMSC LAN89218AQ Ethernet controller on the Marzen development board resides in the external address space of the Local Bus State Controller (LBSC). Move the Ethernet device node to reflect this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/74a8ee61ed89c9ca0489156a4f135ecb825e56b9.1693481518.git.geert+renesas@glider.be
2023-09-25ARM: dts: renesas: r8a7792: Add LBSC nodeGeert Uytterhoeven
Add a minimal device node for the Local Bus State Controller (LBSC) on the R-Car V2H SoC, to be extended by board DTS files for devices residing in the LBSC external address space. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/182fce2257679f6a8963ecb77aae68af617556d1.1693481518.git.geert+renesas@glider.be
2023-09-25ARM: dts: renesas: r8a7779: Add LBSC nodeGeert Uytterhoeven
Add a minimal device node for the Local Bus State Controller (LBSC) on the R-Car H1 SoC, to be extended by board DTS files for devices residing in the LBSC external address space. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/2d0a6054306b4975355e65fe012f860ec00fcf55.1693481518.git.geert+renesas@glider.be
2023-09-25ARM: dts: renesas: r7s72100: Add BSC nodeGeert Uytterhoeven
Add a minimal device node for the Bus State Controller (BSC) on the RZ/A1H SoC, to be extended by board DTS files for devices residing in the BSC external address space. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/ccab4fa198225edcd3750f62532a1ee3c6d2a109.1693481518.git.geert+renesas@glider.be
2023-09-25ARM: dts: renesas: Remove unused LBSC nodes from board DTSGeert Uytterhoeven
Several board DTS files contain minimal device nodes that represent on-SoC Local Bus State Controllers (LBSC), although they belong in the SoC-specific DTS files instead. As these device nodes are incomplete and unused, and hamper adding proper nodes later, it is better to just remove them. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/76ece7602045670cbb8dff684c3366ba6eb89add.1693481518.git.geert+renesas@glider.be
2023-09-25arm64: dts: imx93: Add the TMU interruptFabio Estevam
The Thermal Monitoring Unit (TMU) interrupt is number 83. Describe it in the devicetree to fix the following schema warning: imx93-11x11-evk.dtb: tmu@44482000: 'oneOf' conditional failed, one must be fixed: 'interrupts' is a required property 'interrupts-extended' is a required property from schema $id: http://devicetree.org/schemas/thermal/qoriq-thermal.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8dxl-ss-adma: Fix i2c compatible entriesFabio Estevam
Per i2c-imx-lpi2c.yaml, the imx8dxl lpi2c compatible should be: compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c"; Change it accordingly to fix the following schema warning: imx8dxl-evk.dtb: i2c@5a800000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx8dxl-lpi2c', 'fsl,imx8qxp-lpi2c', 'fsl,imx7ulp-lpi2c'] is too long 'fsl,imx8dxl-lpi2c' is not one of ['fsl,imx7ulp-lpi2c'] 'fsl,imx7ulp-lpi2c' was expected from schema $id: http://devicetree.org/schemas/i2c/i2c-imx-lpi2c.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8x-colibri-iris-v2: Fix pinctrl node namesFabio Estevam
Per fsl,scu-pinctrl.yaml, the pinctrl node names should end with 'grp'. Change them to fix the following schema warning: imx8qxp-colibri-iris-v2.dtb: pinctrl: 'enable_3v3_vmmc', 'lcd-lvds' do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/pinctrl/fsl,scu-pinctrl.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8dxl-ss-conn: Complete the FEC compatiblesFabio Estevam
Use the full compatible list for the imx8dl FEC as per fsl,fec.yaml. This fixes the following schema warning: imx8dxl-evk.dtb: ethernet@5b040000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx8qm-fec'] is too short 'fsl,imx8qm-fec' is not one of ['fsl,imx25-fec', 'fsl,imx27-fec', 'fsl,imx28-fec', 'fsl,imx6q-fec', 'fsl,mvf600-fec', 'fsl,s32v234-fec'] 'fsl,imx8qm-fec' is not one of ['fsl,imx53-fec', 'fsl,imx6sl-fec'] 'fsl,imx8qm-fec' is not one of ['fsl,imx35-fec', 'fsl,imx51-fec'] 'fsl,imx8qm-fec' is not one of ['fsl,imx6ul-fec', 'fsl,imx6sx-fec'] 'fsl,imx8qm-fec' is not one of ['fsl,imx7d-fec'] 'fsl,imx8mq-fec' was expected 'fsl,imx8qm-fec' is not one of ['fsl,imx8mm-fec', 'fsl,imx8mn-fec', 'fsl,imx8mp-fec', 'fsl,imx93-fec'] 'fsl,imx8qm-fec' is not one of ['fsl,imx8dxl-fec', 'fsl,imx8qxp-fec'] 'fsl,imx8qm-fec' is not one of ['fsl,imx8ulp-fec'] from schema $id: http://devicetree.org/schemas/net/fsl,fec.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8m: Remove 'nand-on-flash-bbt' from nand controllerFabio Estevam
The 'nand-on-flash-bbt' property is a property for the NAND device, not for the GPMI nand controller. Remove it to fix the following schema warnings: imx8mm-ddr4-evk.dtb: nand-controller@33002000: Unevaluated properties are not allowed ('nand-on-flash-bbt' was unexpected) from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# imx8mn-bsh-smm-s2.dtb: nand-controller@33002000: Unevaluated properties are not allowed ('nand-on-flash-bbt' was unexpected) from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp-debix-som-a-bmb: Fix EEPROM #size-cellsFabio Estevam
The mac-address is passed as a subnode of the eeprom and its 'reg' property describe a range of addresses in the eeprom. Therefore, #size-cells should be set to 1 instead of 0. This fixes the following schema warnings: imx8mp-debix-som-a-bmb-08.dtb: eeprom@52: #size-cells:0:0: 1 was expected from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml# imx8mp-debix-som-a-bmb-08.dtb: eeprom@52: mac-address@0:reg: [[0], [12]] is too long from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml# imx8mp-debix-som-a-bmb-08.dtb: eeprom@52: mac-address@c:reg: [[12], [12]] is too long from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml# imx8mp-debix-som-a-bmb-08.dtb: eeprom@52: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'mac-address@0', 'mac-address@c' were unexpected) from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-ss-lsio: Add PWM interruptsFabio Estevam
The PWM interrupt is mandatory per imx-pwm.yaml. Add them. This also fixes the followig schema warning: imx8qm-apalis-v1.1-ixora-v1.2.dtb: pwm@5d000000: 'oneOf' conditional failed, one must be fixed: 'interrupts' is a required property 'interrupts-extended' is a required property from schema $id: http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-19 07:57:45 +0000