summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-09-25ARM: dts: imx53: Adjust the ecspi compatibleFabio Estevam
Per fsl-imx-cspi.yaml, "fsl,imx53-ecspi" should not contain addtional compatible entries. Change it accordingly to fix the following schema warning: spi@63fac000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx53-ecspi', 'fsl,imx51-ecspi'] is too long Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25dt-bindings: arm: fsl: Document the missing imx23 boardsFabio Estevam
There are some imx23 based boards that are not documented. Add them to the list of supportted i.MX23 boards. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx7ulp: Fix usbphy1 compatibleFabio Estevam
Per fsl,mxs-usbphy.yaml, fsl,imx7ulp-usbphy is not compatible with fsl,imx6ul-usbphy. Remove 'fsl,imx6ul-usbphy' from the compatible string to fix the following schema warning: imx7ulp-com.dtb: usb-phy@40350000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx7ulp-usbphy', 'fsl,imx6ul-usbphy'] is too long Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6q-pistachio: Use a valid value for fsl,tx-d-calFabio Estevam
Passing 5 to fsl,tx-d-cal is not valid as per fsl,mxs-usbphy.yaml: imx6q-pistachio.dtb: usbphy@20c9000: fsl,tx-d-cal:0:0: 5 is less than the minimum of 79 from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml# Pass the minimum value of 79 instead. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6q-b650v3: Fix fsl,tx-cal-45-dn-ohmsFabio Estevam
Passing 55 to fsl,tx-cal-45-dn-ohms is not valid as per fsl,mxs-usbphy.yaml: imx6q-b650v3.dtb: usbphy@20c9000: fsl,tx-cal-45-dn-ohms:0:0: 55 is greater than the maximum of 54 from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml# Pass the maximum value of 54 instead. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx28-tx28: Move phy_type to USB nodeFabio Estevam
phy_type is a property for the USB controller, not for the USB PHY. Move it to the USB controller nodes to fix the following schema warning: imx28-tx28.dtb: usbphy@8007c000: 'phy_type' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: mxs: Switch to #pwm-cells = <3>Fabio Estevam
mxs-pwm.yaml documents that #pwm-cells should be 3. This is correct as the last cell may indicate the PWM polarity. Convert all mxs devicetree files to using #pwm-cells = <3> for consistency. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6q: Add Variscite MX6 Custom board supportJames Hilliard
This patch adds support for the Variscite MX6 SoM Carrier Board. This Carrier-Board has the following : - LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch display - HDMI Connector - USB Host + USB OTG Connector - 10/100/1000 Mbps Ethernet - miniPCI-Express slot - SD Card connector - Audio Headphone/Line In jack connectors - S-ATA - On-board DMIC - RS485 Header - CAN bus header - SPI header - Camera Interfaces header - OnBoard RTC with Coin Backup battery socket - RS232 Debug Header (IDC10) - RS232 DTE Product Page : https://www.variscite.com/product/single-board-computers/var-mx6customboard The dts file based on the ones provided by Variscite on their own kernel, but adapted for mainline. Cc: Pierluigi Passaro <pierluigi.p@variscite.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6qdl: Add Variscite VAR-SOM-MX6 SoM supportJames Hilliard
This patch adds support for the Variscite VAR_SOM-MX6 SoM with : - i.MX6 Quad or Dual Lite SoC - 256 – 4096 MB DDR3 - 4-64 GB eMMC - 128 – 1024 MB SLC NAND - Camera Interface - HDMI+CEC interface - LVDS / DSI / Parallel RGB interfaces - Ethernet RGMII interface - On-SoM Wi-Fi/Bluetooth with WiLink wl183x SDIO Module - SD/MMC/SDIO interface - USB Host + USB OTG interface - I2C interfaces - SPI interfaces - PCI-Express 2.0 interface - on-SoM Audio Codec with HP/Line-In interfaces + DMIC interface - Digital Audio interface - S/PDIF interface Product website : https://www.variscite.com/product/system-on-module-som/cortex-a9/var-som-mx6-cpu-freescale-imx6/ Support is handled with a SoM-centric dtsi exporting the default interfaces along the default pinmuxing to be enabled by the board dts file. This file is based on the one provided by Variscite on their own kernel, but adapted for mainline. Cc: Pierluigi Passaro <pierluigi.p@variscite.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: mxs: Fix duart clock-namesFabio Estevam
Per pl011.yaml, the first entry of clock-names should be "uartclk". Change it accordingly to fix the following schema warning: imx23-xfi3.dtb: serial@80070000: clock-names:0: 'uartclk' was expected The pl011 driver does not search for the clock name, so this change is safe and was tested on a imx28-evk board. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25dt-bindings: arm: fsl: Add VAR-SOM-MX6 SoM with Custom BoardJames Hilliard
Add support for Variscite i.MX6Q VAR-SOM-MX6 SoM with Custom Board. Cc: Pierluigi Passaro <pierluigi.p@variscite.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6ull/7d-colibri: Fix compatibleFabio Estevam
Fix the imx6ull/7d-colibri devicetrees as per the rules defined at fsl.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6ull-phytec-tauri: Fix compatibleFabio Estevam
Per fsl.yaml, the order of the compatible strings are not correct for imx6ull-phytec-tauri-emmc and imx6ull-phytec-tauri-nand. Fix them accordingly. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6ull-phytec-tauri: Remove board model and compatibleFabio Estevam
The imx6ull-phytec-tauri.dtsi file is included in two places: imx6ull-phytec-tauri-emmc.dts imx6ull-phytec-tauri-nand.dts These two files overwrite the board model and compatible locally, so there is no need for describing them in imx6ull-phytec-tauri.dtsi. Remove the board model and compatible. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx7s: Fix CSI clocksFabio Estevam
Per nxp,imx7-csi.yaml, there is only one CSI clock entry. Fix it. This fixes the following schema warnings: imx7d-zii-rpu2.dtb: csi@30710000: clocks: [[1, 413], [1, 326], [1, 413]] is too long from schema $id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml# imx7d-zii-rpu2.dtb: csi@30710000: clock-names:0: 'mclk' was expected from schema $id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml# imx7d-zii-rpu2.dtb: csi@30710000: clock-names: ['axi', 'mclk', 'dcic'] is too long from schema $id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx51-zii-rdu1: Use preferred i2c-gpios propertiesFabio Estevam
The 'gpios' property to describe the SDA and SCL GPIOs is considered deprecated according to i2c-gpio.yaml. Switch to the preferred 'sda-gpios' and 'scl-gpios' properties. This fixes the following schema warnings: imx51-zii-rdu1.dtb: i2c-gpio: 'sda-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# imx51-zii-rdu1.dtb: i2c-gpio: 'scl-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6ul-tx6ul: Use preferred i2c-gpios propertiesFabio Estevam
The 'gpios' property to describe the SDA and SCL GPIOs is considered deprecated according to i2c-gpio.yaml. Switch to the preferred 'sda-gpios' and 'scl-gpios' properties. This fixes the following schema warnings: imx6ul-tx6ul-0011.dtb: i2c-gpio: 'sda-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# imx6ul-tx6ul-0011.dtb: i2c-gpio: 'scl-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx: Add imx8mm-prt8mm.dtb to buildRob Herring
imx8mm-prt8mm.dts was not getting built. Add it to the build. Fixes: 58497d7a13ed ("arm64: dts: imx: add Protonic PRT8MM board") Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mq-librem5: Remove invalid charger propertiesFabio Estevam
Per bq25890.yaml, 'phys', 'ti,use-vinmin-threshold', 'ti,vinmin-threshold' are not valid properties. Remove them to fix the following schema warning: imx8mq-librem5-r2.dtb: charger@6a: Unevaluated properties are not allowed ('phys', 'ti,use-vinmin-threshold', 'ti,vinmin-threshold' were unexpected) from schema $id: http://devicetree.org/schemas/power/supply/bq25890.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-apalis-v1.1: Remove invalid GPIO propertiesFabio Estevam
Per fsl-imx-gpio.yaml, 'pad-wakeup' and 'pad-wakeup-num' are not valid properties/ Remove them to fix the following schema warning: imx8qm-apalis-ixora-v1.1.dtb: gpio@5d0a0000: 'pad-wakeup', 'pad-wakeup-num' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/fsl-imx-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-apalis-ixora: Remove invalid ngpios propertyFabio Estevam
Per fsl-imx-gpio.yaml, 'ngpios' is not a valid property. Remove it to fix the following schema warning: imx8qm-apalis-v1.1-ixora-v1.2.dtb: gpio@5d0d0000: 'ngpios' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/fsl-imx-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mq-zii-ultra: Fix mdio node nameFabio Estevam
Per mdio-gpio.yaml, the node name should be 'mdio'. Change it accordingly to fix the following schema warning: imx8mq-zii-ultra-zest.dtb: bitbang-mdio: $nodename:0: 'bitbang-mdio' does not match '^mdio(@.*)?' from schema $id: http://devicetree.org/schemas/net/mdio-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mq-nitrogen: Fix PCA9546 I2C subnodesFabio Estevam
Per i2c-mux-pca954x.yaml, the PCA9546 I2C subnodes should be in the 'i2c@' format. Change it accordingly to fix the following schema warning: imx8mm-nitrogen-r2.dtb: i2c-mux@70: Unevaluated properties are not allowed ('i2c3@0' was unexpected) Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6qdl-gw591: Remove lis2de12 interrupt-namesFabio Estevam
According to st,st-sensors.yaml, the 'interrupt-names' property is not a valid one. Remove it to fix the following schema warnings: imx6dl-gw5912.dtb: accel@19: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/iio/st,st-sensors.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mm/p-venice: Remove lis2de12 interrupt-namesFabio Estevam
According to st,st-sensors.yaml, the 'interrupt-names' property is not a valid one. Remove it to fix the following schema warnings: imx8mp-venice-gw73xx-2x.dtb: accelerometer@19: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/iio/st,st-sensors.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8ulp: Fix the SPI clock-names orderFabio Estevam
spi-nxp-fspi.yaml expects the clock-names entries to be in the following order: "fspi_en", "fspi". Change it accordingly to fix the following schema warnings: imx8ulp-evk.dtb: spi@29810000: clock-names:0: 'fspi_en' was expected from schema $id: http://devicetree.org/schemas/spi/spi-nxp-fspi.yaml# imx8ulp-evk.dtb: spi@29810000: clock-names:1: 'fspi' was expected from schema $id: http://devicetree.org/schemas/spi/spi-nxp-fspi.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8dxl-evk: Remove invalid spi propertyFabio Estevam
nxp,fspi-dll-slvdly is not documented nor used anywhere. Drop this invalid property. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8dxl-ss-conn: Move conn_enet0_root_clk outside of socFabio Estevam
The conn_enet0_root_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-ss-audio: Move audio_ipg_clk outside of socFabio Estevam
The audio_ipg_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-ss-img: Move img_ipg_clk outside of socFabio Estevam
The img_ipg_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-ss-conn: Move conn clocks outside of socFabio Estevam
The conn clock nodes do not have any register associated with it, so they should be moved outside of soc to fix schema warning from simple-bus.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-ss-dma: Move dma_ipg_clk outside of socFabio Estevam
The dma_ipg_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-ss-lsio: Move lsio_bus_clk outside of socFabio Estevam
The lsio_bus_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8-ss-lsio: Remove unused clockFabio Estevam
The lsio_mem_clk is not used anywhere, so simply remove it. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mq: Move funnel outside from socFabio Estevam
The 'funnel' node does not contain a register range, so it should be placed outside of the soc node to fix schema warnings from simple-bus.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp: Move funnel outside from socFabio Estevam
The 'funnel' node does not contain a register range, so it should be placed outside of the soc node to fix schema warnings from simple-bus.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp-phyboard-pollux: Add support for RS232/RS485Teresa Remmet
Add UART2 for RS232/RS485 support. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> (Updated the node by not setting the reserved bits(BIT 0 and BIT 3) and enabled internal pullup for RX and TX.) Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de> Signed-off-by: Cem Tenruh <c.tenruh@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp-phyboard-pollux: Add gpio-line-namesCem Tenruh
Add gpio-line-names to the imx8mp-phyboard-pollux devicetree. Signed-off-by: Cem Tenruh <c.tenruh@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp-phycore-som: Add gpio-line-namesCem Tenruh
Add gpio-line-names to the imx8mp-phycore-som devicetree. Signed-off-by: Cem Tenruh <c.tenruh@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp-phyboard-pollux: Enable USB supportTeresa Remmet
Enable USB support for both interfaces in host mode. USB1 is directly conncted to a type-A connector and USB2 is attached to a 4-Port USB Hub. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Cem Tenruh <c.tenruh@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp-phyboard-pollux: Add flexcan supportTeresa Remmet
Add flexcan1 and flexcan2 support for CAN FD on phyBOARD-Pollux. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Cem Tenruh <c.tenruh@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp: Simplify USB C on DH i.MX8M Plus DHCOM PDK3Marek Vasut
Remove the connector as well as all the links and only connect the PTN5150 with xHCI controller. This is sufficient to implement the role switching. Furthermore, this makes resume work without hanging. Without this patch, the platform would hang on resume of 'connector'. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp: Add micfil nodeAdam Ford
The i.MX8MP has a micfil controller which is used for interfacing with a pulse density microphone. Add the node and mark it as disabled by default. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx8mp: Add easrc nodeAdam Ford
The i.MX8MP has an asynchronous sample rate converter which seems to be the same as what is available on the i.MX8M Nano. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: freescale: imx8m*-venice: remove label = "cpu" from DSA dt-bindingTim Harvey
This is not used by the DSA dt-binding, so remove it from the devicetrees. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6qdl-gw5904: add internal mdio nodesTim Harvey
Complete the switch definition by adding the internal mdio nodes. This does not change behavior on Linux but is required if the dt is used for U-Boot which requires the internal PHY ports to be defined for DSA. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx: add support for the ATM0700D4 panel attached to sk-imx53Dmitry Baryshkov
The SK-ATM0700D4-Plug is an extension board (provided by the same manufacturer, [1]) which can be connected to the SK-IMX53 panel kit. The panel can be connected either using the RGB parallel bus or using the LVDS connector (recommended). Add DT files describing this "shield", both RGB and LVDS connections. [1] http://starterkit.ru/html/index.php?name=shop&op=view&id=64 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx93-evk: add uart5Frank Li
Enable uart5 for imx93-evk board. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx93: add dma support for lpuart[1..8]Frank Li
Add dma support for lpuart[1..8]. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25arm64: dts: imx93: add edma1 and edma2Frank Li
Add edma<n> nodes. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-19 09:58:50 +0000