summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-14ibmvnic: avoid calling napi_disable() twiceLijun Pan
__ibmvnic_open calls napi_disable without checking whether NAPI polling has already been disabled or not. This could cause napi_disable being called twice, which could generate deadlock. For example, the first napi_disable will spin until NAPI_STATE_SCHED is cleared by napi_complete_done, then set it again. When napi_disable is called the second time, it will loop infinitely because no dev->poll will be running to clear NAPI_STATE_SCHED. To prevent above scenario from happening, call ibmvnic_napi_disable() which checks if napi is disabled or not before calling napi_disable. Fixes: bfc32f297337 ("ibmvnic: Move resource initialization to its own routine") Suggested-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14r8169: don't advertise pause in jumbo modeHeiner Kallweit
It has been reported [0] that using pause frames in jumbo mode impacts performance. There's no available chip documentation, but vendor drivers r8168 and r8125 don't advertise pause in jumbo mode. So let's do the same, according to Roman it fixes the issue. [0] https://bugzilla.kernel.org/show_bug.cgi?id=212617 Fixes: 9cf9b84cc701 ("r8169: make use of phy_set_asym_pause") Reported-by: Roman Mamedov <rm+bko@romanrm.net> Tested-by: Roman Mamedov <rm+bko@romanrm.net> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14ethtool: pause: make sure we init driver statsJakub Kicinski
The intention was for pause statistics to not be reported when driver does not have the relevant callback (only report an empty netlink nest). What happens currently we report all 0s instead. Make sure statistics are initialized to "not set" (which is -1) so the dumping code skips them. Fixes: 9a27a33027f2 ("ethtool: add standard pause stats") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14io_uring: fix early sqd_list removal sqpoll hangsPavel Begunkov
[ 245.463317] INFO: task iou-sqp-1374:1377 blocked for more than 122 seconds. [ 245.463334] task:iou-sqp-1374 state:D flags:0x00004000 [ 245.463345] Call Trace: [ 245.463352] __schedule+0x36b/0x950 [ 245.463376] schedule+0x68/0xe0 [ 245.463385] __io_uring_cancel+0xfb/0x1a0 [ 245.463407] do_exit+0xc0/0xb40 [ 245.463423] io_sq_thread+0x49b/0x710 [ 245.463445] ret_from_fork+0x22/0x30 It happens when sqpoll forgot to run park_task_work and goes to exit, then exiting user may remove ctx from sqd_list, and so corresponding io_sq_thread() -> io_uring_cancel_sqpoll() won't be executed. Hopefully it just stucks in do_exit() in this case. Fixes: dbe1bdbb39db ("io_uring: handle signals for IO threads like a normal thread") Reported-by: Joakim Hassila <joj@mac.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-14mei: me: add Alder Lake P device id.Tomas Winkler
Add Alder Lake P device ID. Cc: <stable@vger.kernel.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20210414045200.3498241-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8723bs: remove unused argument in functionFabio Aiuto
removed unused 'void *sel' argument in rtw_odm_dbg_comp_msg() function, after DBG_871X_SEL_NL replacement. Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/1bd83b936584432fdb09406f26ed8a8b66cd4c8d.1618401896.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8723bs: remove DBG_871X_SEL_NL macro declarationFabio Aiuto
remove DBG_871X_SEL_NL obsolete macro declaration. Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/8839231b53881c8bf1f8a4d70953ec8acaa2fe95.1618401896.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8723bs: replace DBG_871X_SEL_NL with netdev_dbg()Fabio Aiuto
replace DGB_871X_SEL_NL macro with netdev_dbg(). DBG_871X_SEL_NL macro expands to a raw prink call or a seq_printf if selected stream _is not_ a local debug symbol set to null. This second scenario never occurs so replace all macro usages with netdev_dbg(). This is done with the following coccinelle script: @@ expression sel; expression list args; identifier padapter; identifier func; @@ func(..., struct adapter *padapter, ...) { <... - DBG_871X_SEL_NL(sel, args); + netdev_dbg(padapter->pnetdev, args); ...> } fix by hand one coccinelle output newline issue Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/9d4597097d75a1900c65e4a15077eb0c8bce1c9b.1618401896.git.fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14dm verity fec: fix misaligned RS roots IOJaegeuk Kim
commit df7b59ba9245 ("dm verity: fix FEC for RS roots unaligned to block size") introduced the possibility for misaligned roots IO relative to the underlying device's logical block size. E.g. Android's default RS roots=2 results in dm_bufio->block_size=1024, which causes the following EIO if the logical block size of the device is 4096, given v->data_dev_block_bits=12: E sd 0 : 0:0:0: [sda] tag#30 request not aligned to the logical block size E blk_update_request: I/O error, dev sda, sector 10368424 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 E device-mapper: verity-fec: 254:8: FEC 9244672: parity read failed (block 18056): -5 Fix this by onlu using f->roots for dm_bufio blocksize IFF it is aligned to v->data_dev_block_bits. Fixes: df7b59ba9245 ("dm verity: fix FEC for RS roots unaligned to block size") Cc: stable@vger.kernel.org Signed-off-by: Jaegeuk Kim <jaegeuk@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-04-14Merge tag 's390-5.12-7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - setup stack backchain properly in external and i/o interrupt handler to fix stack unwinding. This broke when converting to generic entry - save caller address of psw_idle to get a sane stacktrace * tag 's390-5.12-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/entry: save the caller of psw_idle s390/entry: avoid setting up backchain in ext|io handlers
2021-04-14Merge tag 'v5.12-rc7' into driver-core-nextGreg Kroah-Hartman
We need the driver core fix in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14dw-xdata-pcie: Update outdated info and improve text formatGustavo Pimentel
Removes old information related to the stop file interface in sysfs left by mistake during patch revision. Improves the document text format to be more user-friendly and adds basic driver related information, such as support, datasheet, and author. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Link: https://lore.kernel.org/r/4e72f931474a784d478e5a67961ecf116911997a.1618066164.git.gustavo.pimentel@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14dw-xdata-pcie: Fix documentation build warnsGustavo Pimentel
Fixes documentation build warns related to indentation, text formatting, and missing reference on toc. This fix solves the following warnings: WARNING: Unexpected indentation. WARNING: Block quote ends without a blank line; unexpected unindent. WARNING: document isn't included in any toctree Link: https://lore.kernel.org/linux-next/20210406214615.40cf3493@canb.auug.org.au/ Fixes: e1181b5bbc3c ("Documentation: misc-devices: Add Documentation for dw-xdata-pcie driver") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Link: https://lore.kernel.org/r/42ed2d9d27579291dc7cce89c0164bd9255fe337.1618066164.git.gustavo.pimentel@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: - Fix incorrect asm constraint for load_unaligned_zeropad() fixup - Fix thread flag update when setting TIF_MTE_ASYNC_FAULT - Fix restored irq state when handling fault on kprobe * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kprobes: Restore local irqflag if kprobes is cancelled arm64: mte: Ensure TIF_MTE_ASYNC_FAULT is set atomically arm64: fix inline asm in load_unaligned_zeropad()
2021-04-14Merge tag 'dmaengine-fix-5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "A couple of dmaengine driver fixes for: - race and descriptor issue for xilinx driver - fix interrupt handling, wq state & cleanup, field sizes for completion, msix permissions for idxd driver - runtime pm fix for tegra driver - double free fix in dma_async_device_register" * tag 'dmaengine-fix-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: idxd: fix wq cleanup of WQCFG registers dmaengine: idxd: clear MSIX permission entry on shutdown dmaengine: plx_dma: add a missing put_device() on error path dmaengine: tegra20: Fix runtime PM imbalance on error dmaengine: Fix a double free in dma_async_device_register dmaengine: dw: Make it dependent to HAS_IOMEM dmaengine: idxd: fix wq size store permission state dmaengine: idxd: fix opcap sysfs attribute output dmaengine: idxd: fix delta_rec and crc size field for completion record dmaengine: idxd: Fix clobbering of SWERR overflow bit on writeback dmaengine: xilinx: dpdma: Fix race condition in done IRQ dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
2021-04-14Merge tag 'vfio-v5.12-rc8' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fix from Alex Williamson: "Verify mmap region within range (Christian A. Ehrhardt)" * tag 'vfio-v5.12-rc8' of git://github.com/awilliam/linux-vfio: vfio/pci: Add missing range check in vfio_pci_mmap
2021-04-14Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fix from Paolo Bonzini: "Fix for a possible out-of-bounds access" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: Don't use vcpu->run->internal.ndata as an array index
2021-04-14Drivers: hv: vmbus: remove unused functionJiapeng Chong
Fix the following clang warning: drivers/hv/ring_buffer.c:89:1: warning: unused function 'hv_set_next_read_location' [-Wunused-function]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1618381282-119135-1-git-send-email-jiapeng.chong@linux.alibaba.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-04-14usb: xhci-mtk: remove unused membersChunfeng Yun
Now some members about phys and wakeup are not used anymore, remove them. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618031406-15347-5-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: xhci-mtk: use clock bulk to get clocksChunfeng Yun
Use clock bulk helpers to get/enable/disable clocks, meanwhile make sys_ck optional, then will be easier to handle clocks. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618031406-15347-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: xhci-mtk: add support runtime PMChunfeng Yun
A dedicated wakeup irq will be used to handle runtime suspend/resume, we use dev_pm_set_dedicated_wake_irq API to take care of requesting and attaching wakeup irq, then the suspend/resume framework will help to enable/disable wakeup irq. The runtime PM is default off since some platforms may not support it. users can enable it via power/control (set "auto") in sysfs. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618031406-15347-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14dt-bindings: usb: mtk-xhci: add wakeup interruptChunfeng Yun
Add an interrupt which is EINT usually to support runtime PM, meanwhile add "interrupt-names" property, for backward compatibility, it's optional and used when wakeup interrupt exists Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618031406-15347-2-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: xhci-mtk: check return value in suspend/resume hooksChunfeng Yun
Return error number if encounter errors during suspend and resume. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618031406-15347-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: typec: tcpm: Allow slow charging loops to comply to pSnkStbyBadhri Jagan Sridharan
When a PD charger advertising Rp-3.0 is connected to a sink port, the sink port current limit would 3A, during SNK_DISCOVERY, till power negotiation starts. Once the negotiation starts the power limit needs to drop down to pSnkStby(500mA @ 5V) and to negotiated current limit once the explicit contract is in place. Not all charging loops can ramp up to 3A and drop down to 500mA within tSnkStdby which is 15ms. The port partner might hard reset if tSnkStdby is not met. To solve this problem, this patch introduces slow-charger-loop which when set makes the port request PD_P_SNK_STDBY_MW upon entering SNK_DISCOVERY(instead of 3A or the 1.5A during SNK_DISCOVERY) and the actual currrent limit after RX of PD_CTRL_PSRDY for PD link or during SNK_READY for non-pd link. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20210414024000.4175263-2-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: typec: tcpm: Honour pSnkStdby requirement during negotiationBadhri Jagan Sridharan
>From PD Spec: The Sink Shall transition to Sink Standby before a positive or negative voltage transition of VBUS. During Sink Standby the Sink Shall reduce its power draw to pSnkStdby. This allows the Source to manage the voltage transition as well as supply sufficient operating current to the Sink to maintain PD operation during the transition. The Sink Shall complete this transition to Sink Standby within tSnkStdby after evaluating the Accept Message from the Source. The transition when returning to Sink operation from Sink Standby Shall be completed within tSnkNewPower. The pSnkStdby requirement Shall only apply if the Sink power draw is higher than this level. The above requirement needs to be met to prevent hard resets from port partner. Without the patch: (5V/3A during SNK_DISCOVERY all the way through explicit contract) [ 95.711984] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 95.712007] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 95.712017] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 95.837190] VBUS on [ 95.882075] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 95.882082] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS] [ 95.882086] polarity 1 [ 95.883151] set_auto_vbus_discharge_threshold mode:0 pps_active:n vbus:5000 ret:0 [ 95.883441] enable vbus discharge ret:0 [ 95.883445] Requesting mux state 1, usb-role 2, orientation 2 [ 95.883776] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [ 95.883879] pending state change SNK_STARTUP -> SNK_DISCOVERY @ 500 ms [rev3 NONE_AMS] [ 96.038960] VBUS on [ 96.383939] state change SNK_STARTUP -> SNK_DISCOVERY [delayed 500 ms] [ 96.383946] Setting voltage/current limit 5000 mV 3000 mA [ 96.383961] vbus=0 charge:=1 [ 96.386044] state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS] [ 96.386309] pending state change SNK_WAIT_CAPABILITIES -> HARD_RESET_SEND @ 450 ms [rev3 NONE_AMS] [ 96.394404] PD RX, header: 0x2161 [1] [ 96.394408] PDO 0: type 0, 5000 mV, 3000 mA [E] [ 96.394410] PDO 1: type 0, 9000 mV, 2000 mA [] [ 96.394412] state change SNK_WAIT_CAPABILITIES -> SNK_NEGOTIATE_CAPABILITIES [rev2 POWER_NEGOTIATION] [ 96.394416] Setting usb_comm capable false [ 96.395083] cc=0 cc1=0 cc2=5 vbus=0 vconn=sink polarity=1 [ 96.395089] Requesting PDO 1: 9000 mV, 2000 mA [ 96.395093] PD TX, header: 0x1042 [ 96.397404] PD TX complete, status: 0 [ 96.397424] pending state change SNK_NEGOTIATE_CAPABILITIES -> HARD_RESET_SEND @ 60 ms [rev2 POWER_NEGOTIATION] [ 96.400826] PD RX, header: 0x363 [1] [ 96.400829] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_TRANSITION_SINK [rev2 POWER_NEGOTIATION] [ 96.400832] pending state change SNK_TRANSITION_SINK -> HARD_RESET_SEND @ 500 ms [rev2 POWER_NEGOTIATION] [ 96.577315] PD RX, header: 0x566 [1] [ 96.577321] Setting voltage/current limit 9000 mV 2000 mA [ 96.578363] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:9000 ret:0 [ 96.578370] state change SNK_TRANSITION_SINK -> SNK_READY [rev2 POWER_NEGOTIATION] With the patch: [ 168.398573] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 168.398605] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 168.398619] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 168.522348] VBUS on [ 168.568676] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 168.568684] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS] [ 168.568688] polarity 1 [ 168.569867] set_auto_vbus_discharge_threshold mode:0 pps_active:n vbus:5000 ret:0 [ 168.570158] enable vbus discharge ret:0 [ 168.570161] Requesting mux state 1, usb-role 2, orientation 2 [ 168.570504] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [ 168.570634] pending state change SNK_STARTUP -> SNK_DISCOVERY @ 500 ms [rev3 NONE_AMS] [ 169.070689] state change SNK_STARTUP -> SNK_DISCOVERY [delayed 500 ms] [ 169.070695] Setting voltage/current limit 5000 mV 3000 mA [ 169.070702] vbus=0 charge:=1 [ 169.072719] state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS] [ 169.073145] pending state change SNK_WAIT_CAPABILITIES -> HARD_RESET_SEND @ 450 ms [rev3 NONE_AMS] [ 169.077162] PD RX, header: 0x2161 [1] [ 169.077172] PDO 0: type 0, 5000 mV, 3000 mA [E] [ 169.077178] PDO 1: type 0, 9000 mV, 2000 mA [] [ 169.077183] state change SNK_WAIT_CAPABILITIES -> SNK_NEGOTIATE_CAPABILITIES [rev2 POWER_NEGOTIATION] [ 169.077191] Setting usb_comm capable false [ 169.077753] cc=0 cc1=0 cc2=5 vbus=0 vconn=sink polarity=1 [ 169.077759] Requesting PDO 1: 9000 mV, 2000 mA [ 169.077762] PD TX, header: 0x1042 [ 169.079990] PD TX complete, status: 0 [ 169.080013] pending state change SNK_NEGOTIATE_CAPABILITIES -> HARD_RESET_SEND @ 60 ms [rev2 POWER_NEGOTIATION] [ 169.083183] VBUS on [ 169.084195] PD RX, header: 0x363 [1] [ 169.084200] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_TRANSITION_SINK [rev2 POWER_NEGOTIATION] [ 169.084206] Setting standby current 5000 mV @ 500 mA [ 169.084209] Setting voltage/current limit 5000 mV 500 mA [ 169.084220] pending state change SNK_TRANSITION_SINK -> HARD_RESET_SEND @ 500 ms [rev2 POWER_NEGOTIATION] [ 169.260222] PD RX, header: 0x566 [1] [ 169.260227] Setting voltage/current limit 9000 mV 2000 mA [ 169.261315] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:9000 ret:0 [ 169.261321] state change SNK_TRANSITION_SINK -> SNK_READY [rev2 POWER_NEGOTIATION] [ 169.261570] AMS POWER_NEGOTIATION finished Fixes: f0690a25a140b ("staging: typec: USB Type-C Port Manager (tcpm)") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20210414024000.4175263-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: dwc3: gadget: Check for disabled LPM quirkThinh Nguyen
If the device doesn't support LPM, make sure to disable the LPM capability and don't advertise to the host that it supports it. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/9e68527ff932b1646f92a7593d4092a903754666.1618366071.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: dwc3: core: Add shutdown callback for dwc3Sandeep Maheswaram
This patch adds a shutdown callback to USB DWC core driver to ensure that it is properly shutdown in reboot/shutdown path. This is required where SMMU address translation is enabled like on SC7180 SoC and few others. If the hardware is still accessing memory after SMMU translation is disabled as part of SMMU shutdown callback in system reboot or shutdown path, then IOVAs(I/O virtual address) which it was using will go on the bus as the physical addresses which might result in unknown crashes (NoC/interconnect errors). Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Link: https://lore.kernel.org/r/1618380209-20114-1-git-send-email-sanm@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: dwc3: gadget: Ignore Packet Pending bitThinh Nguyen
Currently the controller handles single stream only. So, Ignore Packet Pending bit for stream selection and don't search for another stream if the host sends Data Packet with PP=0 (for OUT direction) or ACK with NumP=0 and PP=0 (for IN direction). This slightly improves the stream performance. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/097ba9e104c143f7ba0195ebff29390ec3043692.1618282705.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with ↵Steffen Dirkwinkel
critclk_systems DMI table pmc_plt_clk* clocks are used for ethernet controllers, so need to stay turned on. This adds the affected board family to critclk_systems DMI table, so the clocks are marked as CLK_CRITICAL and not turned off. This replaces the previously listed boards with a match for the whole device family CBxx63. CBxx63 matches only baytrail devices. There are new affected boards that would otherwise need to be listed. There are unaffected boards in the family, but having the clocks turned on is not an issue. Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Link: https://lore.kernel.org/r/20210412133006.397679-1-linux-kernel-dev@beckhoff.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-14KEYS: trusted: Fix missing null return from kzalloc callColin Ian King
The kzalloc call can return null with the GFP_KERNEL flag so add a null check and exit via a new error exit label. Use the same exit error label for another error path too. Addresses-Coverity: ("Dereference null return value") Fixes: 830027e2cb55 ("KEYS: trusted: Add generic trusted keys framework") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14char: tpm: fix error return code in tpm_cr50_i2c_tis_recv()Zhihao Cheng
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 3a253caaad11 ("char: tpm: add i2c driver for cr50") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14MAINTAINERS: Add entry for TEE based Trusted KeysSumit Garg
Add MAINTAINERS entry for TEE based Trusted Keys framework. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14doc: trusted-encrypted: updates with TEE as a new trust sourceSumit Garg
Update documentation for Trusted and Encrypted Keys with TEE as a new trust source. Following is brief description of updates: - Add a section to demonstrate a list of supported devices along with their security properties/guarantees. - Add a key generation section. - Updates for usage section including differences specific to a trust source. Co-developed-by: Elaine Palmer <erpalmer@us.ibm.com> Signed-off-by: Elaine Palmer <erpalmer@us.ibm.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14KEYS: trusted: Introduce TEE based Trusted KeysSumit Garg
Add support for TEE based trusted keys where TEE provides the functionality to seal and unseal trusted keys using hardware unique key. Refer to Documentation/staging/tee.rst for detailed information about TEE. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14KEYS: trusted: Add generic trusted keys frameworkSumit Garg
Current trusted keys framework is tightly coupled to use TPM device as an underlying implementation which makes it difficult for implementations like Trusted Execution Environment (TEE) etc. to provide trusted keys support in case platform doesn't posses a TPM device. Add a generic trusted keys framework where underlying implementations can be easily plugged in. Create struct trusted_key_ops to achieve this, which contains necessary functions of a backend. Also, define a module parameter in order to select a particular trust source in case a platform support multiple trust sources. In case its not specified then implementation itetrates through trust sources list starting with TPM and assign the first trust source as a backend which has initiazed successfully during iteration. Note that current implementation only supports a single trust source at runtime which is either selectable at compile time or during boot via aforementioned module parameter. Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14security: keys: trusted: Make sealed key properly interoperableJames Bottomley
The current implementation appends a migratable flag to the end of a key, meaning the format isn't exactly interoperable because the using party needs to know to strip this extra byte. However, all other consumers of TPM sealed blobs expect the unseal to return exactly the key. Since TPM2 keys have a key property flag that corresponds to migratable, use that flag instead and make the actual key the only sealed quantity. This is secure because the key properties are bound to a hash in the private part, so if they're altered the key won't load. Backwards compatibility is implemented by detecting whether we're loading a new format key or not and correctly setting migratable from the last byte of old format keys. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14security: keys: trusted: use ASN.1 TPM2 key format for the blobsJames Bottomley
Modify the TPM2 key format blob output to export and import in the ASN.1 form for TPM2 sealed object keys. For compatibility with prior trusted keys, the importer will also accept two TPM2B quantities representing the public and private parts of the key. However, the export via keyctl pipe will only output the ASN.1 format. The benefit of the ASN.1 format is that it's a standard and thus the exported key can be used by userspace tools (openssl_tpm2_engine, openconnect and tpm2-tss-engine). The format includes policy specifications, thus it gets us out of having to construct policy handles in userspace and the format includes the parent meaning you don't have to keep passing it in each time. This patch only implements basic handling for the ASN.1 format, so keys with passwords but no policy. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14security: keys: trusted: fix TPM2 authorizationsJames Bottomley
In TPM 1.2 an authorization was a 20 byte number. The spec actually recommended you to hash variable length passwords and use the sha1 hash as the authorization. Because the spec doesn't require this hashing, the current authorization for trusted keys is a 40 digit hex number. For TPM 2.0 the spec allows the passing in of variable length passwords and passphrases directly, so we should allow that in trusted keys for ease of use. Update the 'blobauth' parameter to take this into account, so we can now use plain text passwords for the keys. so before keyctl add trusted kmk "new 32 blobauth=f572d396fae9206628714fb2ce00f72e94f2258fkeyhandle=81000001" @u after we will accept both the old hex sha1 form as well as a new directly supplied password: keyctl add trusted kmk "new 32 blobauth=hello keyhandle=81000001" @u Since a sha1 hex code must be exactly 40 bytes long and a direct password must be 20 or less, we use the length as the discriminator for which form is input. Note this is both and enhancement and a potential bug fix. The TPM 2.0 spec requires us to strip leading zeros, meaning empyty authorization is a zero length HMAC whereas we're currently passing in 20 bytes of zeros. A lot of TPMs simply accept this as OK, but the Microsoft TPM emulator rejects it with TPM_RC_BAD_AUTH, so this patch makes the Microsoft TPM emulator work with trusted keys. Fixes: 0fe5480303a1 ("keys, trusted: seal/unseal with TPM 2.0 chips") Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14oid_registry: Add TCG defined OIDS for TPM keysJames Bottomley
The TCG has defined an OID prefix "2.23.133.10.1" for the various TPM key uses. We've defined three of the available numbers: 2.23.133.10.1.3 TPM Loadable key. This is an asymmetric key (Usually RSA2048 or Elliptic Curve) which can be imported by a TPM2_Load() operation. 2.23.133.10.1.4 TPM Importable Key. This is an asymmetric key (Usually RSA2048 or Elliptic Curve) which can be imported by a TPM2_Import() operation. Both loadable and importable keys are specific to a given TPM, the difference is that a loadable key is wrapped with the symmetric secret, so must have been created by the TPM itself. An importable key is wrapped with a DH shared secret, and may be created without access to the TPM provided you know the public part of the parent key. 2.23.133.10.1.5 TPM Sealed Data. This is a set of data (up to 128 bytes) which is sealed by the TPM. It usually represents a symmetric key and must be unsealed before use. The ASN.1 binary key form starts of with this OID as the first element of a sequence, giving the binary form a unique recognizable identity marker regardless of encoding. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14lib: Add ASN.1 encoderJames Bottomley
We have a need in the TPM2 trusted keys to return the ASN.1 form of the TPM key blob so it can be operated on by tools outside of the kernel. The specific tools are the openssl_tpm2_engine, openconnect and the Intel tpm2-tss-engine. To do that, we have to be able to read and write the same binary key format the tools use. The current ASN.1 decoder does fine for reading, but we need pieces of an ASN.1 encoder to write the key blob in binary compatible form. For backwards compatibility, the trusted key reader code will still accept the two TPM2B quantities that it uses today, but the writer will only output the ASN.1 form. The current implementation only encodes the ASN.1 bits we actually need. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: David Howells <dhowells@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14tpm: vtpm_proxy: Avoid reading host log when using a virtual deviceStefan Berger
Avoid allocating memory and reading the host log when a virtual device is used since this log is of no use to that driver. A virtual device can be identified through the flag TPM_CHIP_FLAG_VIRTUAL, which is only set for the tpm_vtpm_proxy driver. Cc: stable@vger.kernel.org Fixes: 6f99612e2500 ("tpm: Proxy driver for supporting multiple emulated TPMs") Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14tpm: acpi: Check eventlog signature before using itStefan Berger
Check the eventlog signature before using it. This avoids using an empty log, as may be the case when QEMU created the ACPI tables, rather than probing the EFI log next. This resolves an issue where the EFI log was empty since an empty ACPI log was used. Cc: stable@vger.kernel.org Fixes: 85467f63a05c ("tpm: Add support for event log pointer found in TPM2 ACPI table") Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14tpm: efi: Use local variable for calculating final log sizeStefan Berger
When tpm_read_log_efi is called multiple times, which happens when one loads and unloads a TPM2 driver multiple times, then the global variable efi_tpm_final_log_size will at some point become a negative number due to the subtraction of final_events_preboot_size occurring each time. Use a local variable to avoid this integer underflow. The following issue is now resolved: Mar 8 15:35:12 hibinst kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Mar 8 15:35:12 hibinst kernel: Workqueue: tpm-vtpm vtpm_proxy_work [tpm_vtpm_proxy] Mar 8 15:35:12 hibinst kernel: RIP: 0010:__memcpy+0x12/0x20 Mar 8 15:35:12 hibinst kernel: Code: 00 b8 01 00 00 00 85 d2 74 0a c7 05 44 7b ef 00 0f 00 00 00 c3 cc cc cc 66 66 90 66 90 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 f3 a4 Mar 8 15:35:12 hibinst kernel: RSP: 0018:ffff9ac4c0fcfde0 EFLAGS: 00010206 Mar 8 15:35:12 hibinst kernel: RAX: ffff88f878cefed5 RBX: ffff88f878ce9000 RCX: 1ffffffffffffe0f Mar 8 15:35:12 hibinst kernel: RDX: 0000000000000003 RSI: ffff9ac4c003bff9 RDI: ffff88f878cf0e4d Mar 8 15:35:12 hibinst kernel: RBP: ffff9ac4c003b000 R08: 0000000000001000 R09: 000000007e9d6073 Mar 8 15:35:12 hibinst kernel: R10: ffff9ac4c003b000 R11: ffff88f879ad3500 R12: 0000000000000ed5 Mar 8 15:35:12 hibinst kernel: R13: ffff88f878ce9760 R14: 0000000000000002 R15: ffff88f77de7f018 Mar 8 15:35:12 hibinst kernel: FS: 0000000000000000(0000) GS:ffff88f87bd00000(0000) knlGS:0000000000000000 Mar 8 15:35:12 hibinst kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Mar 8 15:35:12 hibinst kernel: CR2: ffff9ac4c003c000 CR3: 00000001785a6004 CR4: 0000000000060ee0 Mar 8 15:35:12 hibinst kernel: Call Trace: Mar 8 15:35:12 hibinst kernel: tpm_read_log_efi+0x152/0x1a7 Mar 8 15:35:12 hibinst kernel: tpm_bios_log_setup+0xc8/0x1c0 Mar 8 15:35:12 hibinst kernel: tpm_chip_register+0x8f/0x260 Mar 8 15:35:12 hibinst kernel: vtpm_proxy_work+0x16/0x60 [tpm_vtpm_proxy] Mar 8 15:35:12 hibinst kernel: process_one_work+0x1b4/0x370 Mar 8 15:35:12 hibinst kernel: worker_thread+0x53/0x3e0 Mar 8 15:35:12 hibinst kernel: ? process_one_work+0x370/0x370 Cc: stable@vger.kernel.org Fixes: 166a2809d65b ("tpm: Don't duplicate events from the final event log in the TCG2 log") Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14USB: Add LPM quirk for Lenovo ThinkPad USB-C Dock Gen2 EthernetKai-Heng Feng
This is another branded 8153 device that doesn't work well with LPM enabled: [ 400.597506] r8152 5-1.1:1.0 enx482ae3a2a6f0: Tx status -71 So disable LPM to resolve the issue. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> BugLink: https://bugs.launchpad.net/bugs/1922651 Link: https://lore.kernel.org/r/20210412135455.791971-1-kai.heng.feng@canonical.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: typec: silence a static checker warningDan Carpenter
Smatch complains about a potential missing error code: drivers/usb/typec/port-mapper.c:168 typec_link_port() warn: missing error code 'ret' This is a false positive and returning zero is intentional. Let's re-arrange the code to silence the warning and make the intent more clear. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YHadaACH8Mq/10F7@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14kdb: Refactor env variables get/set codeSumit Garg
Add two new kdb environment access methods as kdb_setenv() and kdb_printenv() in order to abstract out environment access code from kdb command functions. Also, replace (char *)0 with NULL as an initializer for environment variables array. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/1612771342-16883-1-git-send-email-sumit.garg@linaro.org [daniel.thompson@linaro.org: Replaced (char *)0/NULL initializers with an array size] Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2021-04-14staging: rtl8723bs: fix indentation issue introduced by long line splitFabio Aiuto
fix indentation of last line in if condition. Fixes: af6afdb63f17 (staging: rtl8723bs: split long lines) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/20210414081739.2990-1-fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8192e: removed multiple blank linesMitali Borkar
Removed multiple blank lines to make code better and neater. Reported by checkpatch. Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com> Link: https://lore.kernel.org/r/2bfe551f152a611cc49a71a4984f41ef7ee69df5.1618380932.git.mitaliborkar810@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8192e: remove unnecessary blank line after close braceMitali Borkar
Removed an extra blank line after close brace '{' as it was not necessary. Reported by checkpatch Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com> Link: https://lore.kernel.org/r/40f72a84750f402c342b4685e0a2f15d27875c9a.1618380932.git.mitaliborkar810@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14staging: rtl8192e: remove unnecessary blank line before braceMitali Borkar
Removed an extra blank line before close brace as it was not necessary. Reported by checkpatch. Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com> Link: https://lore.kernel.org/r/cad6a7885f30dcfabaf1ccab1fd0644416fea194.1618380932.git.mitaliborkar810@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 12:00:06 +0000