summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-29cris: select GENERIC_ATOMIC64Cong Wang
Cris doesn't implement atomic64 operations neither, should select GENERIC_ATOMIC64. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29pagemap.h: fix warning about possibly used before init varPaul Gortmaker
Commit f56f821feb7b ("mm: extend prefault helpers to fault in more than PAGE_SIZE") added in the new functions: fault_in_multipages_writeable() and fault_in_multipages_readable(). However, we currently see: include/linux/pagemap.h:492: warning: 'ret' may be used uninitialized in this function include/linux/pagemap.h:492: note: 'ret' was declared here Unlike a lot of gcc nags, this one appears somewhat legit. i.e. passing in an invalid negative value of "size" does make it look like all the conditionals in there would be bypassed and the uninitialized value would be returned. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29skb: avoid unnecessary reallocations in __skb_cowFelix Fietkau
At the beginning of __skb_cow, headroom gets set to a minimum of NET_SKB_PAD. This causes unnecessary reallocations if the buffer was not cloned and the headroom is just below NET_SKB_PAD, but still more than the amount requested by the caller. This was showing up frequently in my tests on VLAN tx, where vlan_insert_tag calls skb_cow_head(skb, VLAN_HLEN). Locally generated packets should have enough headroom, and for forward paths, we already have NET_SKB_PAD bytes of headroom, so we don't need to add any extra space here. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29net: sh_eth: fix the rxdesc pointer when rx descriptor empty happensYoshihiro Shimoda
When Receive Descriptor Empty happens, rxdesc pointer of the driver and actual next descriptor of the controller may be mismatch. This patch fixes it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29asix: allow full size 8021Q frames to be receivedEric Dumazet
asix driver drops 8021Q full size frames because it doesn't take into account VLAN header size. Tested on AX88772 adapter. Signed-off-by: Eric Dumazet <edumazet@google.com> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Allan Chou <allan@asix.com.tw> CC: Trond Wuellner <trond@chromium.org> CC: Grant Grundler <grundler@chromium.org> CC: Paul Stewart <pstew@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29rds_rdma: don't assume infiniband device is PCIThadeu Lima de Souza Cascardo
RDS code assumes that the struct ib_device dma_device member, which is a pointer, points to a struct device embedded in a struct pci_dev. This is not the case for ehca, for example, which is a OF driver, and makes dma_device point to a struct device embedded in a struct platform_device. This will make the system crash when rds_rdma is loaded in a system with ehca, since it will try to access the bus member of a non-existent struct pci_dev. The only reason rds_rdma uses the struct pci_dev is to get the NUMA node the device is attached to. Using dev_to_node for that is much better, since it won't assume which bus the infiniband is attached to. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: dledford@redhat.com Cc: Jes.Sorensen@redhat.com Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Acked-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC caseJames Chapman
An application may call connect() to disconnect a socket using an address with family AF_UNSPEC. The L2TP IP sockets were not handling this case when the socket is not bound and an attempt to connect() using AF_UNSPEC in such cases would result in an oops. This patch addresses the problem by protecting the sk_prot->disconnect() call against trying to unhash the socket before it is bound. The L2TP IPv4 and IPv6 sockets have the same problem. Both are fixed by this patch. The patch also adds more checks that the sockaddr supplied to bind() and connect() calls is valid. RIP: 0010:[<ffffffff82e133b0>] [<ffffffff82e133b0>] inet_unhash+0x50/0xd0 RSP: 0018:ffff88001989be28 EFLAGS: 00010293 Stack: ffff8800407a8000 0000000000000000 ffff88001989be78 ffffffff82e3a249 ffffffff82e3a050 ffff88001989bec8 ffff88001989be88 ffff8800407a8000 0000000000000010 ffff88001989bec8 ffff88001989bea8 ffffffff82e42639 Call Trace: [<ffffffff82e3a249>] udp_disconnect+0x1f9/0x290 [<ffffffff82e42639>] inet_dgram_connect+0x29/0x80 [<ffffffff82d012fc>] sys_connect+0x9c/0x100 Reported-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29Merge branch 'for-arm' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal.git into for-linus Conflicts: arch/arm/kernel/ptrace.c
2012-05-29sparc: fix sparc64 build due to leon.h inclusionSam Ravnborg
Stephen Rothwell <sfr@canb.auug.org.au> reported following error: In file included from arch/sparc/kernel/prom_common.c:26:0: arch/sparc/include/asm/leon.h:221:9: error: unknown type name 'irq_flow_handler_t' arch/sparc/include/asm/leon.h:224:10: error: unknown type name 'irq_flow_handler_t' Fix this by: 1) Avoid including leon.h in prom_commen.h (not needed) 2) Include irq.h in leon.h to avoid the missing symbol error Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29sparc32: remove unused variable in head_32.SSam Ravnborg
It was assigned, but never referenced later. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29sparc32,leon: fix leon bootupSam Ravnborg
head_32.S failed to set cputypval for leon, causing boot to fail. The boot failed because we failed to recognize this was a LEON cpu so we did not preoperly run-time patch the the kernel. This resulted in an early crash. Reported-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Konrad Eisele <konrad@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull CIFS updates from Steve French. * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: (29 commits) cifs: fix oops while traversing open file list (try #4) cifs: Fix comment as d_alloc_root() is replaced by d_make_root() CIFS: Introduce SMB2 mounts as vers=2.1 CIFS: Introduce SMB2 Kconfig option CIFS: Move add/set_credits and get_credits_field to ops structure CIFS: Move protocol specific demultiplex thread calls to ops struct CIFS: Move protocol specific part from cifs_readv_receive to ops struct CIFS: Move header_size/max_header_size to ops structure CIFS: Move protocol specific part from SendReceive2 to ops struct cifs: Include backup intent search flags during searches {try #2) CIFS: Separate protocol specific part from setlk CIFS: Separate protocol specific part from getlk CIFS: Separate protocol specific lock type handling CIFS: Convert lock type to 32 bit variable CIFS: Move locks to cifsFileInfo structure cifs: convert send_nt_cancel into a version specific op cifs: add a smb_version_operations/values structures and a smb_version enum cifs: remove the vers= and version= synonyms for ver= cifs: add warning about change in default cache semantics in 3.7 cifs: display cache= option in /proc/mounts ...
2012-05-29Merge tag 'mfd-3.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "Besides the usual cleanups, this one brings: * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton, ST-E's STAX211, Samsung's MAX77693 and TI's LM3533. * Device tree support for the twl6040, tps65910, da9502 and ab8500 drivers. * Fairly big tps56910, ab8500 and db8500 updates. * i2c support for mc13xxx. * Our regular update for the wm8xxx driver from Mark." Fix up various conflicts with other trees, largely due to ab5500 removal etc. * tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits) mfd: Fix build break of max77693 by adding REGMAP_I2C option mfd: Fix twl6040 build failure mfd: Fix max77693 build failure mfd: ab8500-core should depend on MFD_DB8500_PRCMU gpio: tps65910: dt: process gpio specific device node info mfd: Remove the parsing of dt info for tps65910 gpio mfd: Save device node parsed platform data for tps65910 sub devices mfd: Add r_select to lm3533 platform data gpio: Add Intel Centerton support to gpio-sch mfd: Emulate active low IRQs as well as active high IRQs for wm831x mfd: Mark two lm3533 zone registers as volatile mfd: Fix return type of lm533 attribute is_visible mfd: Enable Device Tree support in the ab8500-pwm driver mfd: Enable Device Tree support in the ab8500-sysctrl driver mfd: Add support for Device Tree to twl6040 mfd: Register the twl6040 child for the ASoC codec unconditionally mfd: Allocate twl6040 IRQ numbers dynamically mfd: twl6040 code cleanup in interrupt initialization part mfd: Enable ab8500-gpadc driver for Device Tree mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver ...
2012-05-29mac80211: fix ADDBA declined after suspend with wowlanEyal Shapira
WLAN_STA_BLOCK_BA is set while suspending but doesn't get cleared when resuming in case of wowlan. This causes further ADDBA requests received to be rejected. Fix it by clearing it in the wowlan path as well. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29wlcore: fix undefined symbols when CONFIG_PM is not definedEyal Shapira
commit c21eebb50379a96e1335e933583dcd5b455c6b64 "wl12xx: add RX filters ACX commands" breaks the build when CONFIG_PM isn't defined: ERROR: "wl1271_rx_filter_get_fields_size" [drivers/net/wireless/ti/wlcore/wlcore.ko] undefined! ERROR: "wl1271_rx_filter_flatten_fields" [drivers/net/wireless/ti/wlcore/wlcore.ko] undefined! code in drivers/net/wireless/ti/wlcore/acx.c is using these functions unconditionally while they are #ifdefed CONFIG_PM. Fix it by ifdefing all relevant RX filters code with CONFIG_PM. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Eyal Shapira <eyal@wizery.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29mac80211: fix flag check for QoS NOACK framesClaudio Pisa
Signed-off-by: Claudio Pisa <claudio.pisa@uniroma2.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29ath9k_hw: apply internal regulator settings on AR933xFelix Fietkau
On AR933x, the internal regulator settings need to be applied before the PLL init to avoid stability issues. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29ath9k_hw: update AR933x initvals to fix issues with high power devicesFelix Fietkau
"> Can you provide more information about the issues with high power devices? Tx being flakey and Rx not working at all." Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29ath9k: fix a use-after-free-bug when ath_tx_setup_buffer() failsFelix Fietkau
ath_tx_setup_buffer() can fail if there is no ath_buf left, or if mapping DMA failed. In this case it frees the skb passed to it. If ath_tx_setup_buffer is called from ath_tx_form_aggr, the skb is still linked into the tid buffer list and must be dequeued before being released. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29ath9k: stop rx dma before stopping txFelix Fietkau
It has been found that active Rx can interfere with stopping tx DMA, which could result in at least parts of those "Failed to stop Tx DMA!" messages. Stopping rx before tx should prevent that. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29Merge tag 'nfs-for-3.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client updates from Trond Myklebust: "New features include: - Rewrite the O_DIRECT code so that it can share the same coalescing and pNFS functionality as the page cache code. - Allow the server to provide hints as to when we should use pNFS, and when it is more efficient to read and write through the metadata server. - NFS cache consistency updates: * Use the ctime to emulate a change attribute for NFSv2/v3 so that all NFS versions can share the same cache management code. * New cache management code will only look at the change attribute and size attribute when deciding whether or not our cached data is still valid or not. * Don't request NFSv4 post-op attributes on writes in cases such as O_DIRECT, where we don't care about data cache consistency, or when we have a write delegation, and know that our cache is still consistent. * Don't request NFSv4 post-op attributes on operations such as COMMIT, where there are no expected metadata updates. * Don't request NFSv4 directory post-op attributes in cases where the operations themselves already return change attribute updates: i.e. operations such as OPEN, CREATE, REMOVE, LINK and RENAME. - Speed up 'ls' and friends by using READDIR rather than READDIRPLUS if we detect no attempts to lookup filenames. - Improve the code sharing between NFSv2/v3 and v4 mounts - NFSv4.1 state management efficiency improvements - More patches in preparation for NFSv4/v4.1 migration functionality." Fix trivial conflict in fs/nfs/nfs4proc.c that was due to the dcache qstr name initialization changes (that made the length/hash a 64-bit union) * tag 'nfs-for-3.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (146 commits) NFSv4: Add debugging printks to state manager NFSv4: Map NFS4ERR_SHARE_DENIED into an EACCES error instead of EIO NFSv4: update_changeattr does not need to set NFS_INO_REVAL_PAGECACHE NFSv4.1: nfs4_reset_session should use nfs4_handle_reclaim_lease_error NFSv4.1: Handle other occurrences of NFS4ERR_CONN_NOT_BOUND_TO_SESSION NFSv4.1: Handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION in the state manager NFSv4.1: Handle errors in nfs4_bind_conn_to_session NFSv4.1: nfs4_bind_conn_to_session should drain the session NFSv4.1: Don't clobber the seqid if exchange_id returns a confirmed clientid NFSv4.1: Add DESTROY_CLIENTID NFSv4.1: Ensure we use the correct credentials for bind_conn_to_session NFSv4.1: Ensure we use the correct credentials for session create/destroy NFSv4.1: Move NFSPROC4_CLNT_BIND_CONN_TO_SESSION to the end of the operations NFSv4.1: Handle NFS4ERR_SEQ_MISORDERED when confirming the lease NFSv4: When purging the lease, we must clear NFS4CLNT_LEASE_CONFIRM NFSv4: Clean up the error handling for nfs4_reclaim_lease NFSv4.1: Exchange ID must use GFP_NOFS allocation mode nfs41: Use BIND_CONN_TO_SESSION for CB_PATH_DOWN* nfs4.1: add BIND_CONN_TO_SESSION operation NFSv4.1 test the mdsthreshold hint parameters ...
2012-05-29ath5k: add possible wiphy interface combinationsFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
2012-05-29tty: fix ldisc lock inversion traceAlan Cox
This is caused by tty_release using tty_lock_pair to lock both sides of the pty/tty pair, and then tty_ldisc_release dropping and relocking one side only. We can drop both fine, so drop both to avoid any lock ordering concerns. Rework the release path to fix the new locking model. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29pty: Fix lock inversionAlan Cox
The ptmx_open path takes the tty and devpts locks in the wrong order because tty_init_dev locks and returns a locked tty. As far as I can tell this is actually safe anyway because the tty being returned is new so nobody can get a reference to lock it at this point. However we don't even need the devpts lock at this point, it's only held as a byproduct of the way the locks were pushe down. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29drm/edid/quirks: ViewSonic VA2026wAdam Jackson
Entirely new class of fail for this one. The detailed timings are for normal CVT but the monitor really wanted CVT-R. Bugzilla: http://bugzilla.redhat/com/516471 Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-29perf tools: Convert critical messages to ui__error()Namhyung Kim
There were places where use ui__warning (or even fprintf) to show critical messages. This patch converts them to ui__error so that the front-end code can implement appropriate behavior. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338265382-6872-3-git-send-email-namhyung@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-29video: bfin_adv7393fb: Fix cleanup codeEmil Goode
This patch fixes the cleanup code of the bfin_adv7393_fb_probe function. 1) The resources were not freed in the order that we allocated them so we call dma_free_coherent() before it was allocated. 2) The labels weren't in the right place which also meant that we freed resources that weren't allocated. 3) We should free gpio_free(P_IDENT(P_PPI0_FS3)) before returning. 4) Lets change the label names into something more meaningful. Signed-off-by: Emil Goode <emilgoode@gmail.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-29video: exynos_dp: reduce delay time when configuring video settingJingoo Han
This patch reduces delay time when configuring video setting, which is helpful to reduce wakeup time during resume. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-29video: exynos_dp: move sw reset prioir to enabling sw defined functionJingoo Han
The sw reset should be called prioir to enabling sw defined function, according to datasheet. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-29video: exynos_dp: use devm_ functionsJingoo Han
The devm_ functions allocate memory that is released when a driver detaches. This makes the code smaller and a bit simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-29fb: handle NULL pointers in framebuffer releaseDan Carpenter
This function is called with a potential NULL pointer in picolcd_init_framebuffer() and it causes a static checker warning. This used to handle NULL pointers when the picolcd code was written, but a couple months later we added the "info->apertures" dereference. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-29drm/udl: remove unused variables.Dave Airlie
These two variables were not required after new API was introduced. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-29Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: tune down the noise of the RP irq limit fail drm/i915: Remove the error message for unbinding pinned buffers drm/i915: Limit page allocations to lowmem (dma32) for i965 drm/i915: always use RPNSWREQ for turbo change requests drm/i915: reject doubleclocked cea modes on dp drm/i915: Adding TV Out Missing modes. drm/i915: wait for a vblank to pass after tv detect drm/i915: no lvds quirk for HP t5740e Thin Client drm/i915: enable vdd when switching off the eDP panel drm/i915: Fix PCH PLL assertions to not assume CRTC:PLL relationship drm/i915: Always update RPS interrupts thresholds along with frequency drm/i915: properly handle interlaced bit for sdvo dtd conversion drm/i915: fix module unload since error_state rework drm/i915: be more careful when returning -ENXIO in gmbus transfer
2012-05-29drm/radeon: fix XFX quirkAlex Deucher
Only override the ddc bus if the connector doesn't have a valid one. The existing code overrode the ddc bus for all connectors even if it had ddc bus. Fixes ddc on another XFX card with the same pci ids that was broken by the quirk overwriting the correct ddc bus. Reported-by: Mehdi Aqadjani Memar <m.aqadjanimemar@student.ru.nl> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-29drm: Use stdint types for consistencyVille Syrjälä
The rest of the code uses stdint types, so use them in drm_property_change_is_valid() as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-29drm: Constify params to format_check() and framebuffer_checks()Ville Syrjälä
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-29drm/radeon: fix typo in trinity tiling setupAlex Deucher
Using the wrong union. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-29drm/udl: unlock before returning in udl_gem_mmap()Dan Carpenter
If we hit an error here, then we should unlock and unreference obj before returning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-29radeon: make radeon_cs_update_pages static.Dave Airlie
Just move its only caller into the same file as it and make it static. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-29KVM: Export asm-generic/kvm_para.hAvi Kivity
Prevents build failures on non-KVM archs. Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-29mtd: nand: fix scan_read_raw_oobDmitry Maluka
It seems there is a bug in scan_read_raw_oob() in nand_bbt.c which should cause wrong functioning of NAND_BBT_SCANALLPAGES option. Artem: the patch did not apply and I had to amend it a bit. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org
2012-05-29mtd: docg3 fix in-middle of blocks readsRobert Jarzmik
Corner case reads do not work, and return false data and ECC. This case is typically seen in a ubifs usage, with a read of type: - docg3 docg3: doc_read_oob(from=14882415, mode=1, data=(c30eca40:12), oob=( (null):0)) This results in the following reads: - docg3 docg3: doc_read_data_area(buf= (null), len=111) - docg3 docg3: doc_read_data_area(buf=c30eca40, len=12) - docg3 docg3: doc_read_data_area(buf= (null), len=389) - docg3 docg3: doc_read_data_area(buf= (null), len=0) - docg3 docg3: doc_read_data_area(buf= (null), len=16) If we suppose that the pages content is : - bytes 0 .. 111 : 0x0a - bytes 112 .. 255 : 0x0f Then the returned bytes will be : - 111 times 0x0a (correct) - 0x0a 2 times and 0x0f 10 times (incorrect, should be 0x0a,0x0f) - 0x0f 389 times (correct) - nothing - correct OOB The reason seams that the first 111 bytes read ends between the 2 docg3 planes, and that the first following read (in the 12 bytes sequence, read of 16 bit word) returns the byte of the rightmost plane duplicated in high and lower byte of the word. Fix this behaviour by ensuring that if the previous read ended up in-between the 2 planes, there will be a first 1 byte read to get back to the beginning of leftmost plane. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-05-28ext4: protect group inode free counting with group lockTao Ma
Now when we set the group inode free count, we don't have a proper group lock so that multiple threads may decrease the inode free count at the same time. And e2fsck will complain something like: Free inodes count wrong for group #1 (1, counted=0). Fix? no Free inodes count wrong for group #2 (3, counted=0). Fix? no Directories count wrong for group #2 (780, counted=779). Fix? no Free inodes count wrong for group #3 (2272, counted=2273). Fix? no So this patch try to protect it with the ext4_lock_group. btw, it is found by xfstests test case 269 and the volume is mkfsed with the parameter "-O ^resize_inode,^uninit_bg,extent,meta_bg,flex_bg,ext_attr" and I have run it 100 times and the error in e2fsck doesn't show up again. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-05-28i7core: fix ranks information at the per-channel structMauro Carvalho Chehab
There is a flag at the per-channel struct that indicates if there are any 4R dimm on it. The way the presence of this flag were reported is not ok, as it might give the false idea that the channel were filled with 2R memories: [ 580.588701] EDAC DEBUG: get_dimm_config: Ch1 phy rd1, wr1 (0x063f7431): 2 ranks, UDIMMs [ 580.588704] EDAC DEBUG: get_dimm_config: dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400 (in this case, just one 1R memory is filled on channel 1) So, use a better way to represent the per-channel ranks information. After the patch, it will show: [ 2002.233978] EDAC DEBUG: get_dimm_config: Ch0 phy rd0, wr0 (0x063f7431): UDIMMs [ 2002.233982] EDAC DEBUG: get_dimm_config: dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400 [ 2002.233988] EDAC DEBUG: get_dimm_config: dimm 1 1024 Mb offset: 4, bank: 8, rank: 1, row: 0x4000, col: 0x400 (in this case, there isn't any 4R memories) Reported-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28i5000: Fix the fatal error handlingMauro Carvalho Chehab
The fatal error channel bits point to a single channel, and not to a range of channels. Fix the code to properly report it, instead of printing messages like: kernel: EDAC MC0: INTERNAL ERROR: channel-b out of range (4 >= 4) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28i5100_edac: Fix a warning when compiled with 32 bitsMauro Carvalho Chehab
drivers/edac/i5100_edac.c: In function ‘i5100_init_csrows’: drivers/edac/i5100_edac.c:862:3: warning: format ‘%zd’ expects argument of type ‘signed size_t’, but argument 5 has type ‘long unsigned int’ [-Wformat] Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28i82975x_edac: Test nr_pages earlier to save a few CPU cyclesMauro Carvalho Chehab
Avoid test nr_pages twice, and initializing some data that won't be used. Cleanup patch only. Reported-by: Aristeu Rozanski Filho <arozansk@redhat.com> Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28e752x_edac: provide more info about how DIMMS/ranks are mappedMauro Carvalho Chehab
No funtional changes here. Only the comments got updated. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28i5000_edac: Fix the logic that retrieves memory informationMauro Carvalho Chehab
The logic there is broken: it basically creates two csrows for each DIMM and assumes that all DIMM's are dual rank. Only one of the csrows will contain the entire DIMM size. If single rank memories are found, they'll be marked with 0 bytes. The check if the AMB is present were also wrong. Yet, as the error reports don't use the memory size in order to credit an error to the right DIMM, that part of the driver seems to work. That's why probably nobody detected the issue yet. After this patch, the memory layout is now properly reported, when debug mode is enabled, and the number of ranks per dimm is now shown: calculate_dimm_size: ---------------------------------------------------------- calculate_dimm_size: slot 3 0 MB | 0 MB | 0 MB | 0 MB | calculate_dimm_size: slot 2 0 MB | 0 MB | 0 MB | 0 MB | calculate_dimm_size: ---------------------------------------------------------- calculate_dimm_size: slot 1 0 MB | 0 MB | 0 MB | 0 MB | calculate_dimm_size: slot 0 512 MB 1R| 512 MB 1R| 512 MB 1R| 512 MB 1R| calculate_dimm_size: ---------------------------------------------------------- calculate_dimm_size: channel 0 | channel 1 | channel 2 | channel 3 | calculate_dimm_size: branch 0 | branch 1 | (1R above means that all memories on my test machine are single-ranked) Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28i5400_edac: improve debug messages to better represent the filled memoryMauro Carvalho Chehab
Improves the debug output message, in order to better represent the memory controller hierarchy, when outputing the debug messages. No functional changes when debug is disabled. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-13 16:16:00 +0000