summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-30Input: pm8941-pwrkey - add resin entryVinod Koul
Since handling is abstracted in this driver, we need to add resin entry in id table along with pwrkey_data. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-30Input: pm8941-pwrkey - abstract register offsets and event codeVinod Koul
In order to support resin thru the pwrkey driver (they are very similar in nature) we need to abstract the handling in this driver. First we abstract pull_up_bit and status_bit along in driver data. The event code sent for key events is quiried from DT. Since the device can be child of pon lookup regmap and reg from parent if lookup fails (we are child). Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: iforce - reorganize joystick configuration listsTim Schumacher
* btn_avb_pegasus and btn_avb_tw are the same. Unify them into btn_joystick_avb. * btn_wheel is an exact copy of btn_joystick, so remove it. Rename btn_avb_wheel into btn_wheel since it is the only sane configuration for a wheel. * Assign the (new) btn_wheel configuration to the "AVB Top Shot Force Feedback Racing Wheel", because the previous configuration was meant for a joystick. Signed-off-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: atmel_mxt_ts - move completion to after config crc is updatedNick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: atmel_mxt_ts - don't report zero pressure from T9Nick Dyer
If T9.CTRL DISAMP is set, then pressure is reported as zero. This means some app layers (eg tslib) will ignore the contact. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: atmel_mxt_ts - zero terminate config firmware fileNick Dyer
We use sscanf to parse the configuration file, so it's necessary to zero terminate the configuration otherwise a truncated file can cause the parser to run off into uninitialised memory. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: atmel_mxt_ts - refactor config update code to add context structNick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: atmel_mxt_ts - config CRC may start at T71Nick Dyer
On devices with the T71 object, the config CRC will start there, rather than at T7. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: atmel_mxt_ts - remove unnecessary debug on ENOMEMNick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURENick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: atmel_mxt_ts - use BIT() macro everywhereNick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: atmel_mxt_ts - only use first T9 instanceNick Dyer
The driver only registers one input device, which uses the screen parameters from the first T9 instance. The first T63 instance also uses those parameters. It is incorrect to send input reports from the second instances of these objects if they are enabled: the input scaling will be wrong and the positions will be mashed together. This also causes problems on Android if the number of slots exceeds 32. In the future, this could be handled by looking for enabled touch object instances and creating an input device for each one. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: aiptek - replace GFP_ATOMIC with GFP_KERNEL in aiptek_probe()Jia-Ju Bai
aiptek_probe() is never called in atomic context. It calls usb_alloc_coherent() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: appletouch - replace GFP_ATOMIC with GFP_KERNELJia-Ju Bai
atp_open(), atp_recover() and atp_resume() are never called in atomic context. They call usb_submit_urb() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: yealink - replace GFP_ATOMIC with GFP_KERNEL in usb_probe()Jia-Ju Bai
usb_probe() is never called in atomic context. It calls usb_alloc_coherent() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: powermate - replace GFP_ATOMIC with GFP_KERNEL in ↵Jia-Ju Bai
powermate_alloc_buffers() powermate_alloc_buffers() is never called in atomic context. It calls usb_alloc_coherent() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: keyspan_remote - replace GFP_ATOMIC with GFP_KERNEL in keyspan_probe()Jia-Ju Bai
keyspan_probe() is never called in atomic context. It calls usb_alloc_coherent() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: wdt87xx_i2c - replace mdelay() with msleep() in wdt87xx_resume()Jia-Ju Bai
wdt87xx_resume() is never called in atomic context. It calls mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: iforce - assign BTN_DEAD only for specific devicesTim Schumacher
Move BTN_DEAD into the arrays with the specific button sets instead of assigning it for every iforce device. BTN_DEAD represents an optical sensor which detects if the user is interacting with the device. On devices without that optical sensor BTN_DEAD is repeatedly causing false inputs on every status update of the joystick. Signed-off-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-26Input: iforce - reformat the packet dump outputTim Schumacher
Previously, packets that have been dumped are shown in the kernel log like this: drivers/input/joystick/iforce/iforce-packets.c: info cmd = ff04, data = 56 02 04 00 Use dev_dbg to dump the packages only when requested and to list the parent device as well. Use printf logic to generate the hexdump instead of looping through every char that needs to be printed (which in turn fixes the unnecessary newlines and looks more clean in general). The resulting package dump output does now look like this: usb 2-8: iforce_dump_packet info cmd = ff04, data = 56 02 04 00 Signed-off-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-26Input: stop telling users to snail-mail VojtechDmitry Torokhov
I do not think Vojtech wants snail mail these days (and he mentioned that nobody has ever sent him snail mail), and the address is not even valid anymore, so let's remove snail-mail instructions from the sources. Acked-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-25Input: pxrc - flatten probe codeDmitry Torokhov
Instead of splitting probe code into separate USB and input setup, flatten it. This allows for easier inspection of order of set up steps, since the probe code is reasonably small. Move input-related initialization (phys) from USB block to input block. Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com> Tested-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-25Input: pxrc - do not store unneeded data in driver structureDmitry Torokhov
There is no need to store data buffer size, pointer to the buffer, or endpoint address in pxrc structure, as they are either only needed during setup, or are available from elsewhere. Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com> Tested-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-25Input: pxrc - move module device table closer to where it is usedDmitry Torokhov
There is no need to have the device table first in the file. Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com> Tested-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-25Input: pxrc - fix freeing URB on device teardownDmitry Torokhov
URB is the only resource that is not managed, and thus is destroyed too early, before we unregister input device and stop URB in pxrc_close(). To fix it let's install custom devm handler to free the URB at the right time in devm unwind sequence. Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com> Tested-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-25Input: pxrc - do not store USB device in private structMarcus Folkesson
The USB device is only needed during setup, so put it back after initialization and do not store it in our private struct. Also, the USB device is a parent of USB interface so our driver model rules ensure that USB device should not disappear while interface device is still there; there is no need to take reference to the USB device. Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-18Input: gpio_keys - add missing include to gpio_keys.hMatti Vaittinen
gpio_keys.h uses 'bool' - type which is defined in linux/types.h. Include this header. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-18Input: egalax_ts - switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-04Input: iforce - use GFP_KERNEL in iforce_get_id_packet()Sebastian Andrzej Siewior
iforce_get_id_packet() invokes wait_event_interruptible_timeout() which means it has to be in non-atomic context at that point, thus we can use GFP_KERNEL instead of GFP_ATOMIC. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-04dt-bindings: input: add common keyboard document bindingsChen Zhong
This patch adds the device tree binding documentation for common keyboard. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-04Input: cros_ec_keyb - remove redundant variable num_colsColin Ian King
Variable num_cols is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable ‘num_cols’ set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-04Input: eeti - fix link to documentation and email address in headerDaniel Mack
Keep the documentation link up-to-date in case anybody need to dive into it again, and update email address while at it. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-04Input: eeti - drop module parameters, parse DT propertiesDaniel Mack
The only user of this driver in mainline does not make use of the module parameters, so let's remove them. All properties for this driver should be set through DT or pdata. Use touchscreen_parse_properties() to automatically set some of the common touchscreen properties and derive the axis inversion through that. And finally, use touchscreen_report_pos() to handle the DT properties automatically instead of doing the inversion ourselves. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-04Input: eeti - add device tree matching tableDaniel Mack
Provide a match table so that the driver can be used in devicetree setups. More properties are added in a later patch. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-04dt-bindings: input: touchscreen: add bindings for eeti touchscreen controllerDaniel Mack
Describe the bindings for EETI touchscreen controllers. Signed-off-by: Daniel Mack <daniel@zonque.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-24Input: add bu21029 touch driverZhu Yi
Add Rohm BU21029 resistive touch panel controller support with I2C interface. Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-21Input: imx6ul_tsc - switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-21Input: fsl-imx25-tcq - switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-21Input: snvs_pwrkey - switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-21Input: imx_keypad - switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12Merge branch 'ib/4.17-xen-kbdfront-runtime-config' into nextDmitry Torokhov
Bring in xen-kbdfront changes.
2018-06-12Input: i8042 - increment wakeup_count for the respective portRavi Chandra Sadineni
Call pm_wakeup_event on every interrupt. This should help us in identifying if keyboard was a potential wake reason for the last resume. Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12Input: cros_ec_keyb - remove check before calling pm_wakeup_eventRavi Chandra Sadineni
Remove the unnecessary check before calling pm_wakeup_event. If the device is not wake enabled, this call is no-op anyway. Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12Input: cros_ec_keyb - switch to SPDX identifierEnric Balletbo i Serra
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12Input: cros_ec_keyb - make license text and MODULE_LICENSE matchEnric Balletbo i Serra
The license text is specifying "GPLv2" but the MODULE_LICENSE is set to GPL which means GNU Public License v2 or later. When MODULE_LICENSE and boiler plate does not match, go for boiler plate license. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12Input: xen-kbdfront - allow better run-time configurationOleksandr Andrushchenko
It is now only possible to control if multi-touch virtual device is created or not (via the corresponding XenStore entries), but keyboard and pointer devices are always created. In some cases this is not desirable. For example, if virtual keyboard device is exposed to Android then the latter won't automatically show on-screen keyboard as it expects that a physical keyboard device can be used for typing. Utilize keyboard and pointer device XenStore feature fields to configure which virtual devices are created: - set "feature-disable-keyboard" to 1 if no keyboard device needs to be created - set "feature-disable-pointer" to 1 if no pointer device needs to be created Keep old behavior by default. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Suggested-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com> Tested-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12Input: xen-kbdfront - fix multi-touch XenStore node's locationsOleksandr Andrushchenko
kbdif protocol describes multi-touch device parameters as a part of frontend's XenBus configuration nodes while they belong to backend's configuration. Fix this by reading the parameters as defined by the protocol. Fixes: 49aac8204da5 ("Input: xen-kbdfront - add multi-touch support") Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12xen: Sync up with the canonical protocol definitions in XenOleksandr Andrushchenko
This is the sync up with the canonical definitions of the input, sound and display protocols in Xen. Changes to kbdif: 1. Add missing string constants for {feature|request}-raw-pointer to align with the rest of the interface file. 2. Add new XenStore feature fields, so it is possible to individually control set of exposed virtual devices for each guest OS: - set feature-disable-keyboard to 1 if no keyboard device needs to be created - set feature-disable-pointer to 1 if no pointer device needs to be created 3. Move multi-touch device parameters to backend nodes: these are described as a part of frontend's XenBus configuration nodes while they belong to backend's configuration. Fix this by moving the parameters to the proper section. Unique-id field: 1. Add unique-id XenBus entry for virtual input and display. 2. Change type of unique-id field to string for sndif to align with display and input protocols. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-11Input: do not assign new tracking ID when changing tool typeDmitry Torokhov
We allow changing tool type (from MT_TOOL_FINGER to MT_TOOL_PALM) so we should not be forcing new tracking ID for the slot. Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-11Input: make input_report_slot_state() return booleanDmitry Torokhov
Let's make input_report_slot_state() return boolean representing whether the contact is active or not. This will allow writing code like: if (input_mt_report_slot_state(input, obj->mt_tool, obj->type != RMI_2D_OBJECT_NONE) { input_event(sensor->input, EV_ABS, ABS_MT_POSITION_X, obj->x); input_event(sensor->input, EV_ABS, ABS_MT_POSITION_Y, obj->y); ... } instead of: input_mt_report_slot_state(input, obj->mt_tool, obj->type != RMI_2D_OBJECT_NONE); if (obj->type != RMI_2D_OBJECT_NONE) { input_event(sensor->input, EV_ABS, ABS_MT_POSITION_X, obj->x); input_event(sensor->input, EV_ABS, ABS_MT_POSITION_Y, obj->y); ... } Reviewed-by: Henrik Rydberg <rydberg@bitmath.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redaht.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-07 00:56:43 +0000