| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix delayed timers
- Fix NULL pointer deref
- Fix wrong range check
* tag 'mips-fixes_6.15_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Fix MAX_REG_OFFSET
MIPS: CPS: Fix potential NULL pointer dereferences in cps_prepare_cpus()
MIPS: rename rollback_handler with skipover_handler
MIPS: Move r4k_wait() to .cpuidle.text section
MIPS: Fix idle VS timer enqueue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix a boot regression on very old x86 CPUs without CPUID support"
* tag 'x86-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Consolidate the loader enablement checking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc timers fixes from Ingo Molnar:
- Fix time keeping bugs in CLOCK_MONOTONIC_COARSE clocks
- Work around absolute relocations into vDSO code that GCC erroneously
emits in certain arm64 build environments
- Fix a false positive lockdep warning in the i8253 clocksource driver
* tag 'timers-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/i8253: Use raw_spinlock_irqsave() in clockevent_i8253_disable()
arm64: vdso: Work around invalid absolute relocations from GCC
timekeeping: Prevent coarse clocks going backwards
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision
M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes
* tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
Input: xpad - fix two controller table values
Input: hisi_powerkey - enable system-wakeup for s2idle
Input: synaptics - enable InterTouch on Dell Precision M3800
Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
Input: synaptics - enable InterTouch on Dynabook Portege X30L-G
Input: synaptics - enable InterTouch on Dynabook Portege X30-D
Input: synaptics - enable SMBus for HP Elitebook 850 G1
Input: mtk-pmic-keys - fix possible null pointer dereference
Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller
Input: cyttsp5 - fix power control issue on wakeup
MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address
dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address
Input: stmpe-ts - use module alias instead of device table
Input: cyttsp5 - ensure minimum reset pulse width
Input: sparcspkr - avoid unannotated fall-through
input/joystick: magellan: Mark __nonstring look-up table
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
- Mark set_high_memory() as __init to fix section mismatch
- Accept memory allocated in memblock_double_array() to mitigate crash
of SNP guests
* tag 'fixes-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Accept allocated memory before use in memblock_double_array()
mm,mm_init: Mark set_high_memory as __init
|
|
A recent commit put one entry in the wrong place. This just moves it to the
right place.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-5-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This adds support for several new controllers, all of which include
Share buttons:
- HORI Drum controller
- PowerA Fusion Pro 4
- 8BitDo Ultimate 3-mode Controller
- Hyperkin DuchesS Xbox One controller
- PowerA MOGA XP-Ultra controller
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-4-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The Share button, if present, is always one of two offsets from the end of the
file, depending on the presence of a specific interface. As we lack parsing for
the identify packet we can't automatically determine the presence of that
interface, but we can hardcode which of these offsets is correct for a given
controller.
More controllers are probably fixable by adding the MAP_SHARE_BUTTON in the
future, but for now I only added the ones that I have the ability to test
directly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-2-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Two controllers -- Mad Catz JOYTECH NEO SE Advanced and PDP Mirror's
Edge Official -- were missing the value of the mapping field, and thus
wouldn't detect properly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-1-vi@endrift.com
Fixes: 540602a43ae5 ("Input: xpad - add a few new VID/PID combinations")
Fixes: 3492321e2e60 ("Input: xpad - add multiple supported devices")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
To wake up the system from s2idle when pressing the power-button, let's
convert from using pm_wakeup_event() to pm_wakeup_dev_event(), as it allows
us to specify the "hard" in-parameter, which needs to be set for s2idle.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250306115021.797426-1-ulf.hansson@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"22 hotfixes. 13 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
About half are for MM. Five OCFS2 fixes and a few MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: fix folio_pte_batch() on XEN PV
nilfs2: fix deadlock warnings caused by lock dependency in init_nilfs()
mm/hugetlb: copy the CMA flag when demoting
mm, swap: fix false warning for large allocation with !THP_SWAP
selftests/mm: fix a build failure on powerpc
selftests/mm: fix build break when compiling pkey_util.c
mm: vmalloc: support more granular vrealloc() sizing
tools/testing/selftests: fix guard region test tmpfs assumption
ocfs2: stop quota recovery before disabling quotas
ocfs2: implement handshaking with ocfs2 recovery thread
ocfs2: switch osb->disable_recovery to enum
mailmap: map Uwe's BayLibre addresses to a single one
MAINTAINERS: add mm THP section
mm/userfaultfd: fix uninitialized output field for -EAGAIN race
selftests/mm: compaction_test: support platform with huge mount of memory
MAINTAINERS: add core mm section
ocfs2: fix panic in failed foilio allocation
mm/huge_memory: fix dereferencing invalid pmd migration entry
MAINTAINERS: add reverse mapping section
x86: disable image size check for test builds
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix for a regression for platform devices
that is a regression from a change that went into 6.15-rc1 that
affected Pixel devices. It has been in linux-next for over a week with
no reported problems"
* tag 'driver-core-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
platform: Fix race condition during DMA configure at IOMMU probe time
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 6.15-rc6. Included in here
are:
- typec driver fixes
- usbtmc ioctl fixes
- xhci driver fixes
- cdnsp driver fixes
- some gadget driver fixes
Nothing really major, just all little stuff that people have reported
being issues. All of these have been in linux-next this week with no
reported issues"
* tag 'usb-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: dbc: Avoid event polling busyloop if pending rx transfers are inactive.
usb: xhci: Don't trust the EP Context cycle bit when moving HW dequeue
usb: usbtmc: Fix erroneous generic_read ioctl return
usb: usbtmc: Fix erroneous wait_srq ioctl return
usb: usbtmc: Fix erroneous get_stb ioctl error returns
usb: typec: tcpm: delay SNK_TRY_WAIT_DEBOUNCE to SRC_TRYWAIT transition
USB: usbtmc: use interruptible sleep in usbtmc_read
usb: cdnsp: fix L1 resume issue for RTL_REVISION_NEW_LPM version
usb: typec: ucsi: displayport: Fix NULL pointer access
usb: typec: ucsi: displayport: Fix deadlock
usb: misc: onboard_usb_dev: fix support for Cypress HX3 hubs
usb: uhci-platform: Make the clock really optional
usb: dwc3: gadget: Make gadget_wakeup asynchronous
usb: gadget: Use get_status callback to set remote wakeup capability
usb: gadget: f_ecm: Add get_status callback
usb: host: tegra: Prevent host controller crash when OTG port is used
usb: cdnsp: Fix issue with resuming from L1
usb: gadget: tegra-xudc: ACK ST_RC after clearing CTRL_RUN
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 6.15-rc6. These are:
- bcm2835-camera driver fix
- two axis-fifo driver fixes
All of these have been in linux-next for a few weeks with no reported
issues"
* tag 'staging-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: axis-fifo: Remove hardware resets for user errors
staging: axis-fifo: Correct handling of tx_fifo_depth for size validation
staging: bcm2835-camera: Initialise dev in v4l2_dev
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a bunch of small driver fixes (mostly all IIO) for 6.15-rc6.
Included in here are:
- loads of tiny IIO driver fixes for reported issues
- hyperv driver fix for a much-reported and worked on sysfs ring
buffer creation bug
All of these have been in linux-next for over a week (the IIO ones for
many weeks now), with no reported issues"
* tag 'char-misc-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Drivers: hv: Make the sysfs node size for the ring buffer dynamic
uio_hv_generic: Fix sysfs creation path for ring buffer
iio: adis16201: Correct inclinometer channel resolution
iio: adc: ad7606: fix serial register access
iio: pressure: mprls0025pa: use aligned_s64 for timestamp
iio: imu: adis16550: align buffers for timestamp
staging: iio: adc: ad7816: Correct conditional logic for store mode
iio: adc: ad7266: Fix potential timestamp alignment issue.
iio: adc: ad7768-1: Fix insufficient alignment of timestamp.
iio: adc: dln2: Use aligned_s64 for timestamp
iio: accel: adxl355: Make timestamp 64-bit aligned using aligned_s64
iio: temp: maxim-thermocouple: Fix potential lack of DMA safe buffer.
iio: chemical: pms7003: use aligned_s64 for timestamp
iio: chemical: sps30: use aligned_s64 for timestamp
iio: imu: inv_mpu6050: align buffer for timestamp
iio: imu: st_lsm6dsx: Fix wakeup source leaks on device unbind
iio: adc: qcom-spmi-iadc: Fix wakeup source leaks on device unbind
iio: accel: fxls8962af: Fix wakeup source leaks on device unbind
iio: adc: ad7380: fix event threshold shift
iio: hid-sensor-prox: Fix incorrect OFFSET calculation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- omap: use correct function to read from device tree
- MAINTAINERS: remove Seth from ISMT maintainership
* tag 'i2c-for-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Remove entry for Seth Heasley
i2c: omap: fix deprecated of_property_read_bool() use
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A fix for the xenbus driver allowing to use a PVH Dom0 with
Xenstore running in another domain
- A fix for the xenbus driver addressing a rare race condition
resulting in NULL dereferences and other problems
- A fix for the xen-swiotlb driver fixing a problem seen on Arm
platforms
* tag 'for-linus-6.15a-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xenbus: Use kref to track req lifetime
xenbus: Allow PVH dom0 a non-local xenstore
xen: swiotlb: Use swiotlb bouncing if kmalloc allocation demands it
|
|
Pull mount fixes from Al Viro:
"A couple of races around legalize_mnt vs umount (both fairly old and
hard to hit) plus two bugs in move_mount(2) - both around 'move
detached subtree in place' logics"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix IS_MNT_PROPAGATING uses
do_move_mount(): don't leak MNTNS_PROPAGATING on failures
do_umount(): add missing barrier before refcount checks in sync case
__legitimize_mnt(): check for MNT_SYNC_UMOUNT should be under mount_lock
|
|
KVM x86 fixes for 6.15-rcN
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid causing
problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to sanitize the
VMCB as its state is undefined after SHUTDOWN, emulating INIT is the
least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a stale
root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB page
to print state, so that KVM doesn't print stale/wrong information.
- When changing memory attributes (e.g. shared <=> private), add potential
hugepage ranges to the mmu_invalidate_range_{start,end} set so that KVM
doesn't create a shared/private hugepage when the the corresponding
attributes will become mixed (the attributes are commited *after* KVM
finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM has at
least one active VM. Effectively BP_SPEC_REDUCE when KVM is loaded led
to very measurable performance regressions for non-KVM workloads.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.15, round #3
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing interrupts
to be taken while TGE=0 and fixing an ugly bug on AmpereOne that
occurs when taking an interrupt while clearing the xMO bits
(AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized by
KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
|
|
into HEAD
KVM/riscv fixes for 6.15, take #1
- Add missing reset of smstateen CSRs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.15-rc6
- omap: use correct function to read from device tree
- MAINTAINERS: remove Seth from ISMT maintainership
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.15, 2nd round:
- One more i.MX8MP nominal drive mode DT fix from Ahmad Fatoum to use
800MHz NoC OPP
- A imx8mp-var-som DT change from Himanshu Bhavani to fix SD card
timeout caused by LDO5
* tag 'imx-fixes-6.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp-var-som: Fix LDO5 shutdown causing SD card timeout
arm64: dts: imx8mp: use 800MHz NoC OPP for nominal drive mode
Link: https://lore.kernel.org/r/aB6h/woeyG1bSo12@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Boon Khai Ng says:
====================
Refactoring designware VLAN code.
Refactoring designware VLAN code and introducing support for
hardware-accelerated VLAN stripping for dwxgmac2 IP,
the current patch set consists of two key changes:
1) Refactoring VLAN Functions:
The first change involves moving common VLAN-related functions
of the DesignWare Ethernet MAC into a dedicated file, stmmac_vlan.c.
This refactoring aims to improve code organization and maintainability
by centralizing VLAN handling logic.
2) Renaming all the functions, symbols and macro into more
generic name and consolidate the same function pointer into one.
3) Enabling VLAN for 10G Ethernet MAC IP:
The second change enables VLAN support specifically
for the 10G Ethernet MAC IP. This enhancement leverages
the hardware capabilities of the to perform VLAN stripping,
Changes from previous submmited patches.
v5:
a) Divided the refactor patch in to two patches,
first patch is to move the code into the separate file
and second patch to update the symbol name
b) get the dwmac4 vlan function up to date and port to
stmmac_vlan.c
c) remove the inline function in function pointer and
use only static function defeination.
d) Remove the outer parenthese that is not needed
on the 1 line return statement.
v4:
a) Updated the commit message to explain the descriptors
behaviour on different hardware.
b) Updated the perfect_match variable with the correct
byte order.
Link: https://lore.kernel.org/20250421162930.10237-1-boon.khai.ng@altera.com
v3: https://lore.kernel.org/20250408081354.25881-1-boon.khai.ng@altera.com
v2: https://lore.kernel.org/BL3PR11MB5748AC693D9D61FB56DB7313C1F32@BL3PR11MB5748.namprd11.prod.outlook.com
v1: https://lore.kernel.org/DM8PR11MB5751E5388AEFCFB80BCB483FC13FA@DM8PR11MB5751.namprd11.prod.outlook.com
====================
Link: https://patch.msgid.link/20250507063812.34000-1-boon.khai.ng@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds support for MAC level VLAN tag stripping for the
dwxgmac2 IP. This feature can be configured through ethtool.
If the rx-vlan-offload is off, then the VLAN tag will be stripped
by the driver. If the rx-vlan-offload is on then the VLAN tag
will be stripped by the MAC.
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/20250507063812.34000-4-boon.khai.ng@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the VLAN handling code decoupled from dwmac4 and dwxgmac2 and
consolidated in stmmac_vlan.c, functions and symbols are renamed to
use a generic prefix. This change improves code clarity and
maintainability by reflecting the shared nature of the VLAN logic,
facilitating future enhancements or reuse without being tied to
specific MAC implementations.
No functional changes are introduced in this patch.
Note: The dwxgmac2_update_vlan_hash function is not combined due
to minor differences in setting the VTFE bit. A separate fix patch
will be submitted to align its behavior with the dwmac4 driver.
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Link: https://patch.msgid.link/20250507063812.34000-3-boon.khai.ng@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor VLAN implementation by moving common code for DWMAC4 and
DWXGMAC IPs into a separate VLAN module. VLAN implementation for
DWMAC4 and DWXGMAC differs only for CSR base address, the descriptor
for the VLAN ID and VLAN VALID bit field.
The descriptor format for VLAN is not moved to the common code due
to hardware-specific differences between DWMAC4 and DWXGMAC.
For the DWMAC4 IP, the Receive Normal Descriptor 0 (RDES0) is
formatted as follows:
31 0
------------------------ -----------------------
RDES0| Inner VLAN TAG [31:16] | Outer VLAN TAG [15:0] |
------------------------ -----------------------
For the DWXGMAC IP, the RDES0 format varies based on the
Tunneled Frame bit (TNP):
a) For Non-Tunneled Frame (TNP=0)
31 0
------------------------ -----------------------
RDES0| Inner VLAN TAG [31:16] | Outer VLAN TAG [15:0] |
------------------------ -----------------------
b) For Tunneled Frame (TNP=1)
31 8 7 3 2 0
--------------------- ------------------ -------
RDES0| VNID/VSID | Reserved | OL2L3 |
--------------------- ------------------ ------
The logic for handling tunneled frames is not yet implemented
in the dwxgmac2_wrback_get_rx_vlan_tci() function. Therefore,
it is prudent to maintain separate functions within their
respective descriptor driver files
(dwxgmac2_descs.c and dwmac4_descs.c).
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Link: https://patch.msgid.link/20250507063812.34000-2-boon.khai.ng@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- fix duplicate MAC address check, by Matthias Schiffer
* tag 'batadv-net-pullrequest-20250509' of git://git.open-mesh.org/linux-merge:
batman-adv: fix duplicate MAC address check
====================
Link: https://patch.msgid.link/20250509090240.107796-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- constify and move broadcast addr definition, Matthias Schiffer
- remove start/stop queue function for mesh-iface, by Antonio Quartulli
- switch to crc32 header for crc32c, by Sven Eckelmann
- drop unused net_namespace.h include, by Sven Eckelmann
* tag 'batadv-next-pullrequest-20250509' of git://git.open-mesh.org/linux-merge:
batman-adv: Drop unused net_namespace.h include
batman-adv: Switch to crc32 header for crc32c
batman-adv: no need to start/stop queue on mesh-iface
batman-adv: constify and move broadcast addr definition
batman-adv: Start new development cycle
====================
Link: https://patch.msgid.link/20250509091041.108416-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull smb client fixes from Steve French:
- Fix dentry leak which can cause umount crash
- Add warning for parse contexts error on compounded operation
* tag '6.15-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: Avoid race in open_cached_dir with lease breaks
smb3 client: warn when parse contexts returns error on compounded operation
|
|
Make sure trace_probe_log_clear is called in the tracing
eprobe code path, matching the trace_probe_log_init call.
Link: https://lore.kernel.org/all/20250504-fix-trace-probe-log-race-v3-1-9e99fec7eddc@gmail.com/
Signed-off-by: Paul Cacheux <paulcacheux@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the mvpp2 driver to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
Note that on the !port->hwtstamp condition, the old code used to fall
through in mvpp2_ioctl(), and return either -ENOTSUPP if !port->phylink,
or -EOPNOTSUPP, in phylink_mii_ioctl(). Keep the test for port->hwtstamp
in the newly introduced net_device_ops, but consolidate the error code
to just -EOPNOTSUPP. The other one is documented as NFS-specific, it's
best to avoid it anyway.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508144630.1979215-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the gianfar driver to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
Don't propagate the unnecessary "config.flags = 0;" assignment to
gfar_hwtstamp_get(), because dev_get_hwtstamp() provides a zero
initialized struct kernel_hwtstamp_config.
After removing timestamping logic from gfar_ioctl(), the rest is
equivalent to phy_do_ioctl_running(), so provide that directly as our
ndo_eth_ioctl() implementation.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # LS1021A
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508143659.1944220-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow SIOCGHWTSTAMP to retrieve the current timestamping settings on
DPNIs. This reflects what has been done in dpaa2_eth_hwtstamp_set().
Tested with hwstamp_ctl -i endpmac17. Before the change, it prints
"Device driver does not have support for non-destructive SIOCGHWTSTAMP."
After the change, it retrieves the previously set configuration.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # LX2160A
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508134102.1747075-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the DPAA2 Ethernet driver to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
This driver only responds to SIOCSHWTSTAMP (not SIOCGHWTSTAMP) so
convert just that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # LX2160A
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508134102.1747075-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vladimir Oltean says:
====================
dpaa_eth conversion to ndo_hwtstamp_get() and ndo_hwtstamp_set()
This is part of the effort to finalize the conversion of drivers to the
dedicated hardware timestamping API.
In the case of the DPAA1 Ethernet driver, a bit more care is needed,
because dpaa_ioctl() looks a bit strange. It handles the "set" IOCTL but
not the "get", and even the phylink_mii_ioctl() portion could do with
some cleanup.
====================
Link: https://patch.msgid.link/20250508124753.1492742-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phylink_mii_ioctl() handles multiple ioctls in addition to just
SIOCGMIIREG: SIOCGMIIPHY, SIOCSMIIREG. Don't filter these out.
Also, phylink can handle the case where net_dev->phydev is NULL (like
optical SFP module, fixed-link). Be like other drivers and let phylink
do so without any driver-side call filtering.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20250508124753.1492742-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow SIOCGHWTSTAMP to retrieve the current timestamping settings
on DPAA1 interfaces. This reflects what has been done in
dpaa_hwtstamp_set().
Tested with hwstamp_ctl -i fm1-mac9.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20250508124753.1492742-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the DPAA1 driver to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
This driver only responds to SIOCSHWTSTAMP (not SIOCGHWTSTAMP) so
convert just that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20250508124753.1492742-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert DSA to the new API, so that the ndo_eth_ioctl() path can
be removed completely.
Move the ds->ops->port_hwtstamp_get() and ds->ops->port_hwtstamp_set()
calls from dsa_user_ioctl() to dsa_user_hwtstamp_get() and
dsa_user_hwtstamp_set().
Due to the fact that the underlying ifreq type changes to
kernel_hwtstamp_config, the drivers and the Ocelot switchdev front-end,
all hooked up directly or indirectly, must also be converted all at once.
The conversion also updates the comment from dsa_port_supports_hwtstamp(),
which is no longer true because kernel_hwtstamp_config is kernel memory
and does not need copy_to_user(). I've deliberated whether it is
necessary to also update "err != -EOPNOTSUPP" to a more general "!err",
but all drivers now either return 0 or -EOPNOTSUPP.
The existing logic from the ocelot_ioctl() function, to avoid
configuring timestamping if the PHY supports the operation, is obsoleted
by more advanced core logic in dev_set_hwtstamp_phylib().
This is only a partial preparation for proper PHY timestamping support.
None of these switch driver currently sets up PTP traps for PHY
timestamping, so setting dev->see_all_hwtstamp_requests is not yet
necessary and the conversion is relatively trivial.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # felix, sja1105, mv88e6xxx
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508095236.887789-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When sending YNL CLI output into a pipe, closing the pipe causes a
BrokenPipeError. E.g. running the following and quitting less:
./tools/net/ynl/pyynl/cli.py --family rt-link --dump getlink | less
Traceback (most recent call last):
File "/home/donaldh/net-next/./tools/net/ynl/pyynl/cli.py", line 160, in <module>
main()
~~~~^^
File "/home/donaldh/net-next/./tools/net/ynl/pyynl/cli.py", line 142, in main
output(reply)
~~~~~~^^^^^^^
File "/home/donaldh/net-next/./tools/net/ynl/pyynl/cli.py", line 97, in output
pprint.PrettyPrinter().pprint(msg)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^
[...]
BrokenPipeError: [Errno 32] Broken pipe
Consolidate the try block for ops and notifications, and gracefully
handle the BrokenPipeError by adding an exception handler to the
consolidated try block.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250508112102.63539-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When CONFIG_PROVE_RCU_LIST is enabled, fprobe triggers the following
warning:
WARNING: suspicious RCU usage
kernel/trace/fprobe.c:457 RCU-list traversed in non-reader section!!
other info that might help us debug this:
#1: ffffffff863c4e08 (fprobe_mutex){+.+.}-{4:4}, at: fprobe_module_callback+0x7b/0x8c0
Call Trace:
fprobe_module_callback
notifier_call_chain
blocking_notifier_call_chain
This warning occurs because fprobe_remove_node_in_module() traverses an
RCU list using RCU primitives without holding an RCU read lock. However,
the function is only called from fprobe_module_callback(), which holds
the fprobe_mutex lock that provides sufficient protection for safely
traversing the list.
Fix the warning by specifying the locking design to the
CONFIG_PROVE_RCU_LIST mechanism. Add the lockdep_is_held() argument to
hlist_for_each_entry_rcu() to inform the RCU checker that fprobe_mutex
provides the required protection.
Link: https://lore.kernel.org/all/20250410-fprobe-v1-1-068ef5f41436@debian.org/
Fixes: a3dc2983ca7b90 ("tracing: fprobe: Cleanup fprobe hash when module unloading")
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Antonio Quartulli <antonio@mandelbit.com>
Tested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
requested
Symmetric RSS hash requires that:
* No other fields besides IP src/dst and/or L4 src/dst are set
* If src is set, dst must also be set
This restriction was only enforced when RXNFC was configured after
symmetric hash was enabled. In the opposite order of operations (RXNFC
then symmetric enablement) the check was not performed.
Perform the sanity check on set_rxfh as well, by iterating over all flow
types hash fields and making sure they are all symmetric.
Introduce a function that returns whether a flow type is hashable (not
spec only) and needs to be iterated over. To make sure that no one
forgets to update the list of hashable flow types when adding new flow
types, a static assert is added to draw the developer's attention.
The conversion of uapi #defines to enum is not ideal, but as Jakub
mentioned [1], we have precedent for that.
[1] https://lore.kernel.org/netdev/20250324073509.6571ade3@kernel.org/
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250508103034.885536-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mctp_flow_prepare_output() is called in mctp_route_output(), which
places outbound packets onto a given interface. The packet may represent
a message fragment, in which case we provoke an unbalanced reference
count to the underlying device. This causes trouble if we ever attempt
to remove the interface:
[ 48.702195] usb 1-1: USB disconnect, device number 2
[ 58.883056] unregister_netdevice: waiting for mctpusb0 to become free. Usage count = 2
[ 69.022548] unregister_netdevice: waiting for mctpusb0 to become free. Usage count = 2
[ 79.172568] unregister_netdevice: waiting for mctpusb0 to become free. Usage count = 2
...
Predicate the invocation of mctp_dev_set_key() in
mctp_flow_prepare_output() on not already having associated the device
with the key. It's not yet realistic to uphold the property that the key
maintains only one device reference earlier in the transmission sequence
as the route (and therefore the device) may not be known at the time the
key is associated with the socket.
Fixes: 67737c457281 ("mctp: Pass flow data & flow release events to drivers")
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://patch.msgid.link/20250508-mctp-dev-refcount-v1-1-d4f965c67bb5@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skb_tx_timestamp() is used for tx software timestamp enabled by
SOF_TIMESTAMPING_TX_SOFTWARE while SKBTX_HW_TSTAMP is used for
SOF_TIMESTAMPING_TX_HARDWARE. As it clearly shows they are different
timestamps in two dimensions, it's not appropriate to group these two
together in the if-statement.
This patch completes three things:
1. make the software one standalone. Users are able to set both
timestamps together with SOF_TIMESTAMPING_OPT_TX_SWHW flag.
2. make the software one generated after the hardware timestamp logic to
avoid generating sw and hw timestamps at one time without
SOF_TIMESTAMPING_OPT_TX_SWHW being set.
3. move the software timestamp call as close to the door bell.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250508034433.14408-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
propagate_mnt() does not attach anything to mounts created during
propagate_mnt() itself. What's more, anything on ->mnt_slave_list
of such new mount must also be new, so we don't need to even look
there.
When move_mount() had been introduced, we've got an additional
class of mounts to skip - if we are moving from anon namespace,
we do not want to propagate to mounts we are moving (i.e. all
mounts in that anon namespace).
Unfortunately, the part about "everything on their ->mnt_slave_list
will also be ignorable" is not true - if we have propagation graph
A -> B -> C
and do OPEN_TREE_CLONE open_tree() of B, we get
A -> [B <-> B'] -> C
as propagation graph, where B' is a clone of B in our detached tree.
Making B private will result in
A -> B' -> C
C still gets propagation from A, as it would after making B private
if we hadn't done that open_tree(), but now the propagation goes
through B'. Trying to move_mount() our detached tree on subdirectory
in A should have
* moved B' on that subdirectory in A
* skipped the corresponding subdirectory in B' itself
* copied B' on the corresponding subdirectory in C.
As it is, the logics in propagation_next() and friends ends up
skipping propagation into C, since it doesn't consider anything
downstream of B'.
IOW, walking the propagation graph should only skip the ->mnt_slave_list
of new mounts; the only places where the check for "in that one
anon namespace" are applicable are propagate_one() (where we should
treat that as the same kind of thing as "mountpoint we are looking
at is not visible in the mount we are looking at") and
propagation_would_overmount(). The latter is better dealt with
in the caller (can_move_mount_beneath()); on the first call of
propagation_would_overmount() the test is always false, on the
second it is always true in "move from anon namespace" case and
always false in "move within our namespace" one, so it's easier
to just use check_mnt() before bothering with the second call and
be done with that.
Fixes: 064fe6e233e8 ("mount: handle mount propagation for detached mount trees")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
as it is, a failed move_mount(2) from anon namespace breaks
all further propagation into that namespace, including normal
mounts in non-anon namespaces that would otherwise propagate
there.
Fixes: 064fe6e233e8 ("mount: handle mount propagation for detached mount trees")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
do_umount() analogue of the race fixed in 119e1ef80ecf "fix
__legitimize_mnt()/mntput() race". Here we want to make sure that
if __legitimize_mnt() doesn't notice our lock_mount_hash(), we will
notice their refcount increment. Harder to hit than mntput_no_expire()
one, fortunately, and consequences are milder (sync umount acting
like umount -l on a rare race with RCU pathwalk hitting at just the
wrong time instead of use-after-free galore mntput_no_expire()
counterpart used to be hit). Still a bug...
Fixes: 48a066e72d97 ("RCU'd vfsmounts")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
netdev_bind_rx takes ownership of the queue array passed as parameter
and frees it, so a queue array buffer cannot be reused across multiple
netdev_bind_rx calls.
This commit fixes that by always passing in a newly created queue array
to all netdev_bind_rx calls in ncdevmem.
Fixes: 85585b4bc8d8 ("selftests: add ncdevmem, netcat for devmem TCP")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250508084434.1933069-1-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mctp_dump_addrinfo, ifa_index can be used to filter interfaces, but
only when the struct ifaddrmsg is provided. Otherwise it will be
comparing to uninitialised memory - reproducible in the syzkaller case from
dhcpd, or busybox "ip addr show".
The kernel MCTP implementation has always filtered by ifa_index, so
existing userspace programs expecting to dump MCTP addresses must
already be passing a valid ifa_index value (either 0 or a real index).
BUG: KMSAN: uninit-value in mctp_dump_addrinfo+0x208/0xac0 net/mctp/device.c:128
mctp_dump_addrinfo+0x208/0xac0 net/mctp/device.c:128
rtnl_dump_all+0x3ec/0x5b0 net/core/rtnetlink.c:4380
rtnl_dumpit+0xd5/0x2f0 net/core/rtnetlink.c:6824
netlink_dump+0x97b/0x1690 net/netlink/af_netlink.c:2309
Fixes: 583be982d934 ("mctp: Add device handling and netlink interface")
Reported-by: syzbot+e76d52dadc089b9d197f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68135815.050a0220.3a872c.000e.GAE@google.com/
Reported-by: syzbot+1065a199625a388fce60@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/681357d6.050a0220.14dd7d.000d.GAE@google.com/
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20250508-mctp-addr-dump-v2-1-c8a53fd2dd66@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
