| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs updates from Damien Le Moal:
"This improves zonefs open sequential file accounting and adds
accounting for active sequential files to allow the user to handle the
maximum number of active zones of an NVMe ZNS drive.
sysfs attributes for both open and active sequential files are also
added to facilitate access to this information from applications
without resorting to inspecting the block device limits"
* tag 'zonefs-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
documentation: zonefs: Document sysfs attributes
documentation: zonefs: Cleanup the mount options section
zonefs: Add active seq file accounting
zonefs: Export open zone resource information through sysfs
zonefs: Always do seq file write open accounting
zonefs: Rename super block information fields
zonefs: Fix management of open zones
zonefs: Clear inode information flags on inode creation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add support for Realtek 8761BUV
- Add HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirk
- Add support for RTL8852C
- Add a new PID/VID 0489/e0c8 for MT7921
- Add support for Qualcomm WCN785x
* tag 'for-net-next-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (26 commits)
Bluetooth: hci_sync: use hci_skb_event() helper
Bluetooth: eir: Add helpers for managing service data
Bluetooth: hci_sync: Fix attempting to suspend with unfiltered passive scan
Bluetooth: MGMT: Add conditions for setting HCI_CONN_FLAG_REMOTE_WAKEUP
Bluetooth: btmtksdio: fix the reset takes too long
Bluetooth: btmtksdio: fix possible FW initialization failure
Bluetooth: btmtksdio: fix use-after-free at btmtksdio_recv_event
Bluetooth: btbcm: Add entry for BCM4373A0 UART Bluetooth
Bluetooth: btusb: Add a new PID/VID 0489/e0c8 for MT7921
Bluetooth: btusb: Add 0x0bda:0x8771 Realtek 8761BUV devices
Bluetooth: btusb: Set HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for QCA
Bluetooth: core: Fix missing power_on work cancel on HCI close
Bluetooth: btusb: add support for Qualcomm WCN785x
Bluetooth: protect le accept and resolv lists with hdev->lock
Bluetooth: use hdev lock for accept_list and reject_list in conn req
Bluetooth: use hdev lock in activate_scan for hci_is_adv_monitoring
Bluetooth: btrtl: Add support for RTL8852C
Bluetooth: btusb: Set HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN for QCA
Bluetooth: Print broken quirks
Bluetooth: HCI: Add HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirk
...
====================
Link: https://lore.kernel.org/r/20220523204151.3327345-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix crash when an LE Connection fails to be established.
* tag 'for-net-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_conn: Fix hci_connect_le_sync
====================
Link: https://lore.kernel.org/r/20220523200349.3322806-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Joanne Koong says:
====================
This patchset implements the basics of dynamic pointers in bpf.
A dynamic pointer (struct bpf_dynptr) is a pointer that stores extra metadata
alongside the address it points to. This abstraction is useful in bpf given
that every memory access in a bpf program must be safe. The verifier and bpf
helper functions can use the metadata to enforce safety guarantees for things
such as dynamically sized strings and kernel heap allocations.
From the program side, the bpf_dynptr is an opaque struct and the verifier
will enforce that its contents are never written to by the program.
It can only be written to through specific bpf helper functions.
There are several uses cases for dynamic pointers in bpf programs. Some
examples include: dynamically sized ringbuf reservations without extra
memcpys, dynamic string parsing and memory comparisons, dynamic memory
allocations that can be persisted in maps, and dynamic + ergonomic parsing of
sk_buff and xdp_md packet data.
At a high-level, the patches are as follows:
1/6 - Adds verifier support for dynptrs
2/6 - Adds bpf_dynptr_from_mem (local dynptr)
3/6 - Adds dynptr support for ring buffers
4/6 - Adds bpf_dynptr_read and bpf_dynptr_write
5/6 - Adds dynptr data slices (ptr to the dynptr data)
6/6 - Tests to check that the verifier rejects invalid cases and passes valid ones
This is the first dynptr patchset in a larger series. The next series of
patches will add dynptrs that support dynamic memory allocations that can also
be persisted in maps, support for parsing packet data through dynptrs, convenience
helpers for using dynptrs as iterators, and more helper functions for interacting
with strings and memory dynamically.
Changelog:
----------
v5 -> v6:
v5:
https://lore.kernel.org/bpf/20220520044245.3305025-1-joannelkoong@gmail.com/
* enforce PTR_TO_MAP_VALUE for bpf_dynptr_from_mem data in check_helper_call
instead of using DYNPTR_TYPE_LOCAL when checking func arg compatiblity
* remove MEM_DYNPTR modifier
v4 -> v5:
v4:
https://lore.kernel.org/bpf/20220509224257.3222614-1-joannelkoong@gmail.com/
* Remove malloc dynptr; this will be part of the 2nd patchset while we
figure out memory accounting
* For data slices, only set the register's ref_obj_id to dynptr_id (Alexei)
* Tidying (eg remove "inline", move offset checking to "check_func_arg_reg_off")
(David)
* Add a few new test cases, remove malloc-only ones.
v3 -> v4:
v3:
https://lore.kernel.org/bpf/20220428211059.4065379-1-joannelkoong@gmail.com/
1/6 - Change mem ptr + size check to use more concise inequality expression
(David + Andrii)
2/6 - Add check for meta->uninit_dynptr_regno not already set (Andrii)
Move DYNPTR_TYPE_FLAG_MASK to include/linux/bpf.h (Andrii)
3/6 - Remove four underscores for invoking BPF_CALL (Andrii)
Add __BPF_TYPE_FLAG_MAX and use it for __BPF_TYPE_LAST_FLAG (Andrii)
4/6 - Fix capacity to be bpf_dynptr size value in check_off_len (Andrii)
Change -EINVAL to -E2BIG if len + offset is out of bounds (Andrii)
5/6 - Add check for only 1 dynptr arg for dynptr data function (Andrii)
6/6 - For ringbuf map, set max_entries from userspace (Andrii)
Use err ?: ... for interactring with dynptr APIs (Andrii)
Define array_map2 for add_dynptr_to_map2 test where value is a struct
with an embedded dynptr
Remove ref id from missing_put_callback message, since on different
environments, ref id is not always = 1
v2 -> v3:
v2:
https://lore.kernel.org/bpf/20220416063429.3314021-1-joannelkoong@gmail.com/
* Reorder patches (move ringbuffer patch to be right after the verifier +
* malloc
dynptr patchset)
* Remove local type dynptrs (Andrii + Alexei)
* Mark stack slot as STACK_MISC after any writes into a dynptr instead of
* explicitly prohibiting writes (Alexei)
* Pass number of slots, not memory size to is_spi_bounds_valid (Kumar)
* Check reference leaks by adding dynptr id to state->refs instead of checking
stack slots (Alexei)
v1 -> v2:
v1: https://lore.kernel.org/bpf/20220402015826.3941317-1-joannekoong@fb.com/
1/7 -
* Remove ARG_PTR_TO_MAP_VALUE_UNINIT alias and use
ARG_PTR_TO_MAP_VALUE | MEM_UNINIT directly (Andrii)
* Drop arg_type_is_mem_ptr() wrapper function (Andrii)
2/7 -
* Change name from MEM_RELEASE to OBJ_RELEASE (Andrii)
* Use meta.release_ref instead of ref_obj_id != 0 to determine whether
to release reference (Kumar)
* Drop type_is_release_mem() wrapper function (Andrii)
3/7 -
* Add checks for nested dynptrs edge-cases, which could lead to corrupt
* writes of the dynptr stack variable.
* Add u64 flags to bpf_dynptr_from_mem() and bpf_dynptr_alloc() (Andrii)
* Rename from bpf_malloc/bpf_free to bpf_dynptr_alloc/bpf_dynptr_put
(Alexei)
* Support alloc flag __GFP_ZERO (Andrii)
* Reserve upper 8 bits in dynptr size and offset fields instead of
reserving just the upper 4 bits (Andrii)
* Allow dynptr zero-slices (Andrii)
* Use the highest bit for is_rdonly instead of the 28th bit (Andrii)
* Rename check_* functions to is_* functions for better readability
(Andrii)
* Add comment for code that checks the spi bounds (Andrii)
4/7 -
* Fix doc description for bpf_dynpt_read (Toke)
* Move bpf_dynptr_check_off_len() from function patch 1 to here (Andrii)
5/7 -
* When finding the id for the dynptr to associate the data slice with,
look for dynptr arg instead of assuming it is BPF_REG_1.
6/7 -
* Add __force when casting from unsigned long to void * (kernel test
* robot)
* Expand on docs for ringbuf dynptr APIs (Andrii)
7/7 -
* Use table approach for defining test programs and error messages
* (Andrii)
* Print out full log if there’s an error (Andrii)
* Use bpf_object__find_program_by_name() instead of specifying
program name as a string (Andrii)
* Add 6 extra cases: invalid_nested_dynptrs1, invalid_nested_dynptrs2,
invalid_ref_mem1, invalid_ref_mem2, zero_slice_access,
and test_alloc_zero_bytes
* Add checking for edge cases (eg allocing with invalid flags)
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
This patch adds tests for dynptrs, which include cases that the
verifier needs to reject (for example, a bpf_ringbuf_reserve_dynptr
without a corresponding bpf_ringbuf_submit/discard_dynptr) as well
as cases that should successfully pass.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-7-joannelkoong@gmail.com
|
|
This patch adds a new helper function
void *bpf_dynptr_data(struct bpf_dynptr *ptr, u32 offset, u32 len);
which returns a pointer to the underlying data of a dynptr. *len*
must be a statically known value. The bpf program may access the returned
data slice as a normal buffer (eg can do direct reads and writes), since
the verifier associates the length with the returned pointer, and
enforces that no out of bounds accesses occur.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-6-joannelkoong@gmail.com
|
|
This patch adds two helper functions, bpf_dynptr_read and
bpf_dynptr_write:
long bpf_dynptr_read(void *dst, u32 len, struct bpf_dynptr *src, u32 offset);
long bpf_dynptr_write(struct bpf_dynptr *dst, u32 offset, void *src, u32 len);
The dynptr passed into these functions must be valid dynptrs that have
been initialized.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-5-joannelkoong@gmail.com
|
|
Currently, our only way of writing dynamically-sized data into a ring
buffer is through bpf_ringbuf_output but this incurs an extra memcpy
cost. bpf_ringbuf_reserve + bpf_ringbuf_commit avoids this extra
memcpy, but it can only safely support reservation sizes that are
statically known since the verifier cannot guarantee that the bpf
program won’t access memory outside the reserved space.
The bpf_dynptr abstraction allows for dynamically-sized ring buffer
reservations without the extra memcpy.
There are 3 new APIs:
long bpf_ringbuf_reserve_dynptr(void *ringbuf, u32 size, u64 flags, struct bpf_dynptr *ptr);
void bpf_ringbuf_submit_dynptr(struct bpf_dynptr *ptr, u64 flags);
void bpf_ringbuf_discard_dynptr(struct bpf_dynptr *ptr, u64 flags);
These closely follow the functionalities of the original ringbuf APIs.
For example, all ringbuffer dynptrs that have been reserved must be
either submitted or discarded before the program exits.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-4-joannelkoong@gmail.com
|
|
This patch adds a new api bpf_dynptr_from_mem:
long bpf_dynptr_from_mem(void *data, u32 size, u64 flags, struct bpf_dynptr *ptr);
which initializes a dynptr to point to a bpf program's local memory. For now
only local memory that is of reg type PTR_TO_MAP_VALUE is supported.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-3-joannelkoong@gmail.com
|
|
This patch adds the bulk of the verifier work for supporting dynamic
pointers (dynptrs) in bpf.
A bpf_dynptr is opaque to the bpf program. It is a 16-byte structure
defined internally as:
struct bpf_dynptr_kern {
void *data;
u32 size;
u32 offset;
} __aligned(8);
The upper 8 bits of *size* is reserved (it contains extra metadata about
read-only status and dynptr type). Consequently, a dynptr only supports
memory less than 16 MB.
There are different types of dynptrs (eg malloc, ringbuf, ...). In this
patchset, the most basic one, dynptrs to a bpf program's local memory,
is added. For now only local memory that is of reg type PTR_TO_MAP_VALUE
is supported.
In the verifier, dynptr state information will be tracked in stack
slots. When the program passes in an uninitialized dynptr
(ARG_PTR_TO_DYNPTR | MEM_UNINIT), the stack slots corresponding
to the frame pointer where the dynptr resides at are marked
STACK_DYNPTR. For helper functions that take in initialized dynptrs (eg
bpf_dynptr_read + bpf_dynptr_write which are added later in this
patchset), the verifier enforces that the dynptr has been initialized
properly by checking that their corresponding stack slots have been
marked as STACK_DYNPTR.
The 6th patch in this patchset adds test cases that the verifier should
successfully reject, such as for example attempting to use a dynptr
after doing a direct write into it inside the bpf program.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-2-joannelkoong@gmail.com
|
|
Kernel Test Robot complains about passing zero to PTR_ERR for the said
line, suppress it by using PTR_ERR_OR_ZERO.
Fixes: c0a5a21c25f3 ("bpf: Allow storing referenced kptr in map")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220521132620.1976921-1-memxor@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal:
"For this cycle, the libata.force kernel parameter changes stand out.
Beside that, some small cleanups in various drivers. In more detail:
- Changes to the pata_mpc52xx driver in preparation for powerpc's
asm/prom.h cleanup, from Christophe.
- Improved ATA command allocation, from John.
- Various small cleanups to the pata_via, pata_sil680, pata_ftide010,
sata_gemini, ahci_brcm drivers and to libata-core, from Sergey,
Diego, Ruyi, Mighao and Jiabing.
- Add support for the RZ/G2H SoC to the rcar-sata driver, from Lad.
- AHCI RAID ID cleanup, from Dan.
- Improvement to the libata.force kernel parameter to allow most
horkage flags to be manually forced for debugging drive issues in
the field without needing recompiling a kernel, from me"
* tag 'ata-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_ftide010: Remove unneeded ERROR check before clk_disable_unprepare
doc: admin-guide: Update libata kernel parameters
ata: libata-core: Allow forcing most horkage flags
ata: libata-core: Improve link flags forced settings
ata: libata-core: Refactor force_tbl definition
ata: libata-core: cleanup ata_device_blacklist
ata: simplify the return expression of brcm_ahci_remove
ata: Make use of the helper function devm_platform_ioremap_resource()
ata: libata-core: replace "its" with "it is"
ahci: Add a generic 'controller2' RAID id
dt-bindings: ata: renesas,rcar-sata: Add r8a774e1 support
ata: pata_via: fix sloppy typing in via_do_set_mode()
ata: pata_sil680: fix result type of sil680_sel{dev|reg}()
ata: libata-core: fix parameter type in ata_xfer_mode2shift()
libata: Improve ATA queued command allocation
ata: pata_mpc52xx: Prepare cleanup of powerpc's asm/prom.h
|
|
Introduce bpf_arch_text_invalidate and use it to fill unused part of the
bpf_prog_pack with illegal instructions when a BPF program is freed.
Fixes: 57631054fae6 ("bpf: Introduce bpf_prog_pack allocator")
Fixes: 33c9805860e5 ("bpf: Introduce bpf_jit_binary_pack_[alloc|finalize|free]")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220520235758.1858153-4-song@kernel.org
|
|
Introduce a memset like API for text_poke. This will be used to fill the
unused RX memory with illegal instructions.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20220520235758.1858153-3-song@kernel.org
|
|
bpf_prog_pack enables sharing huge pages among multiple BPF programs.
These pages are marked as executable before the JIT engine fill it with
BPF programs. To make these pages safe, fill the hole bpf_prog_pack with
illegal instructions before making it executable.
Fixes: 57631054fae6 ("bpf: Introduce bpf_prog_pack allocator")
Fixes: 33c9805860e5 ("bpf: Introduce bpf_jit_binary_pack_[alloc|finalize|free]")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220520235758.1858153-2-song@kernel.org
|
|
Pull block driver updates from Jens Axboe:
"Here are the driver updates queued up for 5.19. This contains:
- NVMe pull requests via Christoph:
- tighten the PCI presence check (Stefan Roese)
- fix a potential NULL pointer dereference in an error path (Kyle
Miller Smith)
- fix interpretation of the DMRSL field (Tom Yan)
- relax the data transfer alignment (Keith Busch)
- verbose error logging improvements (Max Gurtovoy, Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni, Christoph)
- set non-mdts limits in nvme_scan_work (Chaitanya Kulkarni)
- add support for TP4084 - Time-to-Ready Enhancements (Christoph)
- MD pull request via Song:
- Improve annotation in raid5 code, by Logan Gunthorpe
- Support MD_BROKEN flag in raid-1/5/10, by Mariusz Tkaczyk
- Other small fixes/cleanups
- null_blk series making the configfs side much saner (Damien)
- Various minor drbd cleanups and fixes (Haowen, Uladzislau, Jiapeng,
Arnd, Cai)
- Avoid using the system workqueue (and hence flushing it) in rnbd
(Jack)
- Avoid using the system workqueue (and hence flushing it) in aoe
(Tetsuo)
- Series fixing discard_alignment issues in drivers (Christoph)
- Small series fixing drivers poking at disk->part0 for openers
information (Christoph)
- Series fixing deadlocks in loop (Christoph, Tetsuo)
- Remove loop.h and add SPDX headers (Christoph)
- Various fixes and cleanups (Julia, Xie, Yu)"
* tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block: (72 commits)
mtip32xx: fix typo in comment
nvme: set non-mdts limits in nvme_scan_work
nvme: add support for TP4084 - Time-to-Ready Enhancements
nvme: split the enum used for various register constants
nbd: Fix hung on disconnect request if socket is closed before
nvme-fabrics: add a request timeout helper
nvme-pci: harden drive presence detect in nvme_dev_disable()
nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
nvme: mark internal passthru request RQF_QUIET
nvme: remove unneeded include from constants file
nvme: add missing status values to verbose logging
nvme: set dma alignment to dword
nvme: fix interpretation of DMRSL
loop: remove most the top-of-file boilerplate comment from the UAPI header
loop: remove most the top-of-file boilerplate comment
loop: add a SPDX header
loop: remove loop.h
block: null_blk: Improve device creation with configfs
block: null_blk: Cleanup messages
block: null_blk: Cleanup device creation and deletion
...
|
|
Pull block updates from Jens Axboe:
"Here are the core block changes for 5.19. This contains:
- blk-throttle accounting fix (Laibin)
- Series removing redundant assignments (Michal)
- Expose bio cache via the bio_set, so that DM can use it (Mike)
- Finish off the bio allocation interface cleanups by dealing with
the weirdest member of the family. bio_kmalloc combines a kmalloc
for the bio and bio_vecs with a hidden bio_init call and magic
cleanup semantics (Christoph)
- Clean up the block layer API so that APIs consumed by file systems
are (almost) only struct block_device based, so that file systems
don't have to poke into block layer internals like the
request_queue (Christoph)
- Clean up the blk_execute_rq* API (Christoph)
- Clean up various lose end in the blk-cgroup code to make it easier
to follow in preparation of reworking the blkcg assignment for bios
(Christoph)
- Fix use-after-free issues in BFQ when processes with merged queues
get moved to different cgroups (Jan)
- BFQ fixes (Jan)
- Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming,
Wolfgang, me)"
* tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits)
blk-mq: fix typo in comment
bfq: Remove bfq_requeue_request_body()
bfq: Remove superfluous conversion from RQ_BIC()
bfq: Allow current waker to defend against a tentative one
bfq: Relax waker detection for shared queues
blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE()
blk-throttle: Set BIO_THROTTLED when bio has been throttled
blk-cgroup: Remove unnecessary rcu_read_lock/unlock()
blk-cgroup: always terminate io.stat lines
block, bfq: make bfq_has_work() more accurate
block, bfq: protect 'bfqd->queued' by 'bfqd->lock'
block: cleanup the VM accounting in submit_bio
block: Fix the bio.bi_opf comment
block: reorder the REQ_ flags
blk-iocost: combine local_stat and desc_stat to stat
block: improve the error message from bio_check_eod
block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone
block: remove superfluous calls to blkcg_bio_issue_init
kthread: unexport kthread_blkcg
blk-cgroup: cleanup blkcg_maybe_throttle_current
...
|
|
Pull cdrom updates from Jens Axboe:
"Removal of unused code and documentation updates"
* tag 'for-5.19/cdrom-2022-05-22' of git://git.kernel.dk/linux-block:
cdrom: remove obsolete TODO list
block: remove last remaining traces of IDE documentation
cdrom: mark CDROMGETSPINDOWN/CDROMSETSPINDOWN obsolete
cdrom: remove the unused driver specific disc change ioctl
cdrom: make EXPORT_SYMBOL follow exported function
|
|
Pull writeback fix from Jens Axboe:
"A single writeback fix that didn't belong in any other branch,
correcting the number of skipped pages"
* tag 'for-5.19/writeback-2022-05-22' of git://git.kernel.dk/linux-block:
fs-writeback: writeback_sb_inodes：Recalculate 'wrote' according skipped pages
|
|
git://git.kernel.dk/linux-block
Pull io_uring NVMe command passthrough from Jens Axboe:
"On top of everything else, this adds support for passthrough for
io_uring.
The initial feature for this is NVMe passthrough support, which allows
non-filesystem based IO commands and admin commands.
To support this, io_uring grows support for SQE and CQE members that
are twice as big, allowing to pass in a full NVMe command without
having to copy data around. And to complete with more than just a
single 32-bit value as the output"
* tag 'for-5.19/io_uring-passthrough-2022-05-22' of git://git.kernel.dk/linux-block: (22 commits)
io_uring: cleanup handling of the two task_work lists
nvme: enable uring-passthrough for admin commands
nvme: helper for uring-passthrough checks
blk-mq: fix passthrough plugging
nvme: add vectored-io support for uring-cmd
nvme: wire-up uring-cmd support for io-passthru on char-device.
nvme: refactor nvme_submit_user_cmd()
block: wire-up support for passthrough plugging
fs,io_uring: add infrastructure for uring-cmd
io_uring: support CQE32 for nop operation
io_uring: enable CQE32
io_uring: support CQE32 in /proc info
io_uring: add tracing for additional CQE32 fields
io_uring: overflow processing for CQE32
io_uring: flush completions for CQE32
io_uring: modify io_get_cqe for CQE32
io_uring: add CQE32 completion processing
io_uring: add CQE32 setup processing
io_uring: change ring size calculation for CQE32
io_uring: store add. return values for CQE32
...
|
|
The kernel test robot noticed that the ctucanfd platform driver fails
during modpost on platforms that don't support IOMEM.
| ERROR: modpost: "devm_ioremap_resource" [drivers/net/can/ctucanfd/ctucanfd_platform.ko] undefined!
This patch adds the missing HAS_IOMEM dependency.
Link: https://lore.kernel.org/all/20220523123720.1656611-1-mkl@pengutronix.de
Fixes: e8f0c23a2415 ("can: ctucanfd: CTU CAN FD open-source IP core - platform/SoC support.")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Cc: Ondrej Ille <ondrej.ille@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This driver does a lot of casting of smaller buffers to
struct kvaser_cmd_ext, GCC 12 does not like that:
| drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c:489:65: warning: array subscript ‘struct kvaser_cmd_ext[0]’ is partly outside array bounds of ‘unsigned char[32]’ [-Warray-bounds]
| drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c:489:23: note: in expansion of macro ‘le16_to_cpu’
| 489 | ret = le16_to_cpu(((struct kvaser_cmd_ext *)cmd)->len);
| | ^~~~~~~~~~~
Temporarily silence this warning (move it to W=1 builds).
Link: https://lore.kernel.org/all/20220520194659.2356903-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Link: https://lore.kernel.org/all/20220521111145.81697-24-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
There are spelling mistakes in ASSERT messages. Fix these.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220523115604.49942-1-colin.i.king@gmail.com
|
|
Latest llvm-project upstream had a change of behavior
related to qualifiers on function return type ([1]).
This caused selftests btf_dump/btf_dump failure.
The following example shows what changed.
$ cat t.c
typedef const char * const (* const (* const fn_ptr_arr2_t[5])())(char * (*)(int));
struct t {
int a;
fn_ptr_arr2_t l;
};
int foo(struct t *arg) {
return arg->a;
}
Compiled with latest upstream llvm15,
$ clang -O2 -g -target bpf -S -emit-llvm t.c
The related generated debuginfo IR looks like:
!16 = !DIDerivedType(tag: DW_TAG_typedef, name: "fn_ptr_arr2_t", file: !1, line: 1, baseType: !17)
!17 = !DICompositeType(tag: DW_TAG_array_type, baseType: !18, size: 320, elements: !32)
!18 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !19)
!19 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !20, size: 64)
!20 = !DISubroutineType(types: !21)
!21 = !{!22, null}
!22 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !23, size: 64)
!23 = !DISubroutineType(types: !24)
!24 = !{!25, !28}
!25 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !26, size: 64)
!26 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !27)
!27 = !DIBasicType(name: "char", size: 8, encoding: DW_ATE_signed_char)
You can see two intermediate const qualifier to pointer are dropped in debuginfo IR.
With llvm14, we have following debuginfo IR:
!16 = !DIDerivedType(tag: DW_TAG_typedef, name: "fn_ptr_arr2_t", file: !1, line: 1, baseType: !17)
!17 = !DICompositeType(tag: DW_TAG_array_type, baseType: !18, size: 320, elements: !34)
!18 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !19)
!19 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !20, size: 64)
!20 = !DISubroutineType(types: !21)
!21 = !{!22, null}
!22 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !23)
!23 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !24, size: 64)
!24 = !DISubroutineType(types: !25)
!25 = !{!26, !30}
!26 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !27)
!27 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !28, size: 64)
!28 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !29)
!29 = !DIBasicType(name: "char", size: 8, encoding: DW_ATE_signed_char)
All const qualifiers are preserved.
To adapt the selftest to both old and new llvm, this patch removed
the intermediate const qualifier in const-to-ptr types, to make the
test succeed again.
[1] https://reviews.llvm.org/D125919
Reported-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220523152044.3905809-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The handling of connection failures shall be handled by the request
completion callback as already done by hci_cs_le_create_conn, also make
sure to use hci_conn_failed instead of hci_le_conn_failed as the later
don't actually call hci_conn_del to cleanup.
Link: https://github.com/bluez/bluez/issues/340
Fixes: 8e8b92ee60de5 ("Bluetooth: hci_sync: Add hci_le_create_conn_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Pull io_uring 'more data in socket' support from Jens Axboe:
"To be able to fully utilize the 'poll first' support in the core
io_uring branch, it's advantageous knowing if the socket was empty
after a receive. This adds support for that"
* tag 'for-5.19/io_uring-net-2022-05-22' of git://git.kernel.dk/linux-block:
io_uring: return hint on whether more data is available after receive
tcp: pass back data left in socket after receive
|
|
This reverts commit c7dacf5b0f32957b24ef29df1207dc2cd8307743,
"mailbox: avoid timer start from callback"
The previous commit was reverted since it lead to a race that
caused the hrtimer to not be started at all. The check for
hrtimer_active() in msg_submit() will return true if the
callback function txdone_hrtimer() is currently running. This
function could return HRTIMER_NORESTART and then the timer
will not be restarted, and also msg_submit() will not start
the timer. This will lead to a message actually being submitted
but no timer will start to check for its compleation.
The original fix that added checking hrtimer_active() was added to
avoid a warning with hrtimer_forward. Looking in the kernel
another solution to avoid this warning is to check hrtimer_is_queued()
before calling hrtimer_forward_now() instead. This however requires a
lock so the timer is not started by msg_submit() inbetween this check
and the hrtimer_forward() call.
Fixes: c7dacf5b0f32 ("mailbox: avoid timer start from callback")
Signed-off-by: Björn Ardö <bjorn.ardo@axis.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
git://git.kernel.dk/linux-block
Pull io_uring socket() support from Jens Axboe:
"This adds support for socket(2) for io_uring. This is handy when using
direct / registered file descriptors with io_uring.
Outside of those two patches, a small series from Dylan on top that
improves the tracing by providing a text representation of the opcode
rather than needing to decode this by reading the header file every
time.
That sits in this branch as it was the last opcode added (until it
wasn't...)"
* tag 'for-5.19/io_uring-socket-2022-05-22' of git://git.kernel.dk/linux-block:
io_uring: use the text representation of ops in trace
io_uring: rename op -> opcode
io_uring: add io_uring_get_opcode
io_uring: add type to op enum
io_uring: add socket(2) support
net: add __sys_socket_file()
|
|
git://git.kernel.dk/linux-block
Pull io_uring xattr support from Jens Axboe:
"Support for the xattr variants"
* tag 'for-5.19/io_uring-xattr-2022-05-22' of git://git.kernel.dk/linux-block:
io_uring: cleanup error-handling around io_req_complete
io_uring: fix trace for reduced sqe padding
io_uring: add fgetxattr and getxattr support
io_uring: add fsetxattr and setxattr support
fs: split off do_getxattr from getxattr
fs: split off setxattr_copy and do_setxattr function from setxattr
|
|
Pull io_uring updates from Jens Axboe:
"Here are the main io_uring changes for 5.19. This contains:
- Fixes for sparse type warnings (Christoph, Vasily)
- Support for multi-shot accept (Hao)
- Support for io_uring managed fixed files, rather than always
needing the applicationt o manage the indices (me)
- Fix for a spurious poll wakeup (Dylan)
- CQE overflow fixes (Dylan)
- Support more types of cancelations (me)
- Support for co-operative task_work signaling, rather than always
forcing an IPI (me)
- Support for doing poll first when appropriate, rather than always
attempting a transfer first (me)
- Provided buffer cleanups and support for mapped buffers (me)
- Improve how io_uring handles inflight SCM files (Pavel)
- Speedups for registered files (Pavel, me)
- Organize the completion data in a struct in io_kiocb rather than
keep it in separate spots (Pavel)
- task_work improvements (Pavel)
- Cleanup and optimize the submission path, in general and for
handling links (Pavel)
- Speedups for registered resource handling (Pavel)
- Support sparse buffers and file maps (Pavel, me)
- Various fixes and cleanups (Almog, Pavel, me)"
* tag 'for-5.19/io_uring-2022-05-22' of git://git.kernel.dk/linux-block: (111 commits)
io_uring: fix incorrect __kernel_rwf_t cast
io_uring: disallow mixed provided buffer group registrations
io_uring: initialize io_buffer_list head when shared ring is unregistered
io_uring: add fully sparse buffer registration
io_uring: use rcu_dereference in io_close
io_uring: consistently use the EPOLL* defines
io_uring: make apoll_events a __poll_t
io_uring: drop a spurious inline on a forward declaration
io_uring: don't use ERR_PTR for user pointers
io_uring: use a rwf_t for io_rw.flags
io_uring: add support for ring mapped supplied buffers
io_uring: add io_pin_pages() helper
io_uring: add buffer selection support to IORING_OP_NOP
io_uring: fix locking state for empty buffer group
io_uring: implement multishot mode for accept
io_uring: let fast poll support multishot
io_uring: add REQ_F_APOLL_MULTISHOT for requests
io_uring: add IORING_ACCEPT_MULTISHOT for accept
io_uring: only wake when the correct events are set
io_uring: avoid io-wq -EAGAIN looping for !IOPOLL
...
|
|
Upon nfsd shutdown any pending DRC cache is freed. DRC cache use is
tracked via a percpu counter. In the current code the percpu counter
is destroyed before. If any pending cache is still present,
percpu_counter_add is called with a percpu counter==NULL. This causes
a kernel crash.
The solution is to destroy the percpu counter after the cache is freed.
Fixes: e567b98ce9a4b (“nfsd: protect concurrent access to nfsd stats counters”)
Signed-off-by: Julian Schroeder <jumaco@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU update from Paul McKenney:
- Documentation updates
- Miscellaneous fixes
- Callback-offloading updates, mainly simplifications
- RCU-tasks updates, including some -rt fixups, handling of systems
with sparse CPU numbering, and a fix for a boot-time race-condition
failure
- Put SRCU on a memory diet in order to reduce the size of the
srcu_struct structure
- Torture-test updates fixing some bugs in tests and closing some
testing holes
- Torture-test updates for the RCU tasks flavors, most notably ensuring
that building rcutorture and friends does not change the
RCU-tasks-related Kconfig options
- Torture-test scripting updates
- Expedited grace-period updates, most notably providing
milliseconds-scale (not all that) soft real-time response from
synchronize_rcu_expedited().
This is also the first time in almost 30 years of RCU that someone
other than me has pushed for a reduction in the RCU CPU stall-warning
timeout, in this case by more than three orders of magnitude from 21
seconds to 20 milliseconds. This tighter timeout applies only to
expedited grace periods
* tag 'rcu.2022.05.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits)
rcu: Move expedited grace period (GP) work to RT kthread_worker
rcu: Introduce CONFIG_RCU_EXP_CPU_STALL_TIMEOUT
srcu: Drop needless initialization of sdp in srcu_gp_start()
srcu: Prevent expedited GPs and blocking readers from consuming CPU
srcu: Add contention check to call_srcu() srcu_data ->lock acquisition
srcu: Automatically determine size-transition strategy at boot
rcutorture: Make torture.sh allow for --kasan
rcutorture: Make torture.sh refscale and rcuscale specify Tasks Trace RCU
rcutorture: Make kvm.sh allow more memory for --kasan runs
torture: Save "make allmodconfig" .config file
scftorture: Remove extraneous "scf" from per_version_boot_params
rcutorture: Adjust scenarios' Kconfig options for CONFIG_PREEMPT_DYNAMIC
torture: Enable CSD-lock stall reports for scftorture
torture: Skip vmlinux check for kvm-again.sh runs
scftorture: Adjust for TASKS_RCU Kconfig option being selected
rcuscale: Allow rcuscale without RCU Tasks Rude/Trace
rcuscale: Allow rcuscale without RCU Tasks
refscale: Allow refscale without RCU Tasks Rude/Trace
refscale: Allow refscale without RCU Tasks
rcutorture: Allow specifying per-scenario stat_interval
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull LKMM update from Paul McKenney:
"This updates the klitmus7 compatibility table to indicate that
herdtools7 7.56.1 or better is required for Linux kernel v5.17 or
later"
* tag 'lkmm.2022.05.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/memory-model/README: Update klitmus7 compat table
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc library updates from Paul McKenney:
"This adds a number of library functions and splits this library into
multiple files"
* tag 'nolibc.2022.05.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (61 commits)
tools/nolibc/string: Implement `strdup()` and `strndup()`
tools/nolibc/string: Implement `strnlen()`
tools/nolibc/stdlib: Implement `malloc()`, `calloc()`, `realloc()` and `free()`
tools/nolibc/types: Implement `offsetof()` and `container_of()` macro
tools/nolibc/sys: Implement `mmap()` and `munmap()`
tools/nolibc: i386: Implement syscall with 6 arguments
tools/nolibc: Remove .global _start from the entry point code
tools/nolibc: Replace `asm` with `__asm__`
tools/nolibc: x86-64: Update System V ABI document link
tools/nolibc/stdlib: only reference the external environ when inlined
tools/nolibc/string: do not use __builtin_strlen() at -O0
tools/nolibc: add the nolibc subdir to the common Makefile
tools/nolibc: add a makefile to install headers
tools/nolibc/types: add poll() and waitpid() flag definitions
tools/nolibc/sys: add syscall definition for getppid()
tools/nolibc/string: add strcmp() and strncmp()
tools/nolibc/stdio: add support for '%p' to vfprintf()
tools/nolibc/stdlib: add a simple getenv() implementation
tools/nolibc/stdio: make printf(%s) accept NULL
tools/nolibc/stdlib: implement abort()
...
|
|
Merge int340x thermal driver updates, PCH thermal driver updates and
miscellaneous thermal control updates for 5.19-rc1:
- Clean up _OSC handling in int340x (Davidlohr Bueso).
- Improve overheat condition handling during suspend-to-idle in the
Intel PCH thermal driver (Zhang Rui).
- Use local ops instead of global ops in devfreq_cooling (Kant Fan).
- Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
(Hesham Almatary)
* thermal-int340x:
thermal: int340x: Clean up _OSC context init
thermal: int340x: Consolidate freeing of acpi_buffer pointer
thermal: int340x: Clean up unnecessary acpi_buffer pointer freeing
* thermal-pch:
thermal: intel: pch: improve the cooling delay log
thermal: intel: pch: enhance overheat handling
thermal: intel: pch: move cooling delay to suspend_noirq phase
PM: wakeup: expose pm_wakeup_pending to modules
* thermal-misc:
thermal: devfreq_cooling: use local ops instead of global ops
thermal: hisi_termal: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Allow runtime services to be re-enabled at boot on RT kernels.
- Provide access to secrets injected into the boot image by CoCo
hypervisors (COnfidential COmputing)
- Use DXE services on x86 to make the boot image executable after
relocation, if needed.
- Prefer mirrored memory for randomized allocations.
- Only randomize the placement of the kernel image on arm64 if the
loader has not already done so.
- Add support for obtaining the boot hartid from EFI on RISC-V.
* tag 'efi-next-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL
efi: stub: prefer mirrored memory for randomized allocations
efi/arm64: libstub: run image in place if randomized by the loader
efi: libstub: pass image handle to handle_kernel_image()
efi: x86: Set the NX-compatibility flag in the PE header
efi: libstub: ensure allocated memory to be executable
efi: libstub: declare DXE services table
efi: Add missing prototype for efi_capsule_setup_info
docs: security: Add secrets/coco documentation
efi: Register efi_secret platform device if EFI secret area is declared
virt: Add efi_secret module to expose confidential computing secrets
efi: Save location of EFI confidential computing area
efi: Allow to enable EFI runtime services by default on RT
|
|
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20220521111145.81697-84-Julia.Lawall@inria.fr
|
|
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Müller <deso@posteo.net>
Link: https://lore.kernel.org/bpf/20220521111145.81697-71-Julia.Lawall@inria.fr
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.19/drivers
Pull MD updates from Song:
"- Remove uses of bdevname, by Christoph Hellwig;
- Bug fixes by Guoqing Jiang, and Xiao Ni."
* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: fix double free of io_acct_set bioset
md: Don't set mddev private to NULL in raid0 pers->free
md: remove most calls to bdevname
md: protect md_unregister_thread from reentrancy
md: don't unregister sync_thread with reconfig_mutex held
|
|
Get rid of redundant assignments which end up in values not being
read either because they are overwritten or the function ends.
Reported by clang-tidy [deadcode.DeadStores]
Signed-off-by: Michal Orzel <michalorzel.eng@gmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
|
|
Merge power management tools updates for 5.19-rc1:
- Update turbostat to version 2022.04.16 including the following
changes:
* No build warnings with -Wextra (Len Brown).
* Tweak --show and --hide capability (Len Brown).
* Be more useful as non-root (Len Brown).
* Fix ICX DRAM power numbers (Len Brown).
* Fix dump for AMD cpus (Dan Merillat).
* Add Power Limit4 support (Sumeet Pawnikar).
* Print power values upto three decimal (Sumeet Pawnikar).
* Allow -e for all names (Zephaniah E. Loss-Cutler-Hull).
* Allow printing header every N iterations (Zephaniah E.
Loss-Cutler-Hull).
* Support thermal throttle count print (Chen Yu).
* pm-tools:
tools/power turbostat: version 2022.04.16
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: be more useful as non-root
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: Support thermal throttle count print
tools/power turbostat: Allow printing header every N iterations
tools/power turbostat: Allow -e for all names.
tools/power turbostat: print power values upto three decimal
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: fix dump for AMD cpus
tools/power turbostat: tweak --show and --hide capability
|
|
Merge generlic power domains update for 5.19-rc1:
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
* pm-domains:
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
PM: domains: Move genpd's time-accounting to ktime_get_mono_fast_ns()
PM: domains: Extend dev_pm_domain_detach() doc
|
|
Add linux/module.h in acp-pci.c to solve the below dependency
All error/warnings (new ones prefixed by >>):
>> sound/soc/amd/acp/acp-pci.c:148:1: warning: data definition has no type or storage class
148 | MODULE_DEVICE_TABLE(pci, acp_pci_ids);
| ^~~~~~~~~~~~~~~~~~~
>> sound/soc/amd/acp/acp-pci.c:148:1: error: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' [-Werror=implicit-int]
...
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Syed Saba Kareem<ssabakar@amd.com>
Link: https://lore.kernel.org/r/20220523112956.3087604-1-ssabakar@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Merge cpufreq updates for 5.19-rc1:
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois):
* Add per_cpu efficiency_class to the CPPC driver.
* Make the CPPC driver Register EM based on efficiency class
information.
* Adjust _OSC for flexible address space in the ACPI platform
initialization code and always set CPPC _OSC bits if CPPC_LIB is
supported.
* Assume no transition latency if no PCCT in the CPPC driver.
* Add fast_switch and dvfs_possible_from_any_cpu support to the CPPC
driver.
* pm-cpufreq:
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
cpufreq: make interface functions and lock holding state clear
cpufreq: Abort show()/store() for half-initialized policies
cpufreq: Rearrange locking in cpufreq_remove_dev()
cpufreq: Split cpufreq_offline()
cpufreq: Reorganize checks in cpufreq_offline()
cpufreq: Clear real_cpus mask from remove_cpu_dev_symlink()
cpufreq: intel_pstate: Support Sapphire Rapids OOB mode
Revert "cpufreq: Fix possible race in cpufreq online error path"
cpufreq: CPPC: Register EM based on efficiency class information
cpufreq: CPPC: Add per_cpu efficiency_class
cpufreq: Avoid unnecessary frequency updates due to mismatch
cpufreq: Fix possible race in cpufreq online error path
cpufreq: intel_pstate: Handle no_turbo in frequency invariance
cpufreq: Prepare cleanup of powerpc's asm/prom.h
cpufreq: governor: Use kobject release() method to free dbs_data
|
|
Johan Hovold has pointed out that there are several deficiencies and a
race condition in the regmap_mux_safe ops that were merged. Pipe clocks
has been updated to use newer and simpler clk_regmap_phy_mux_ops. Drop
the regmap-mux-safe clock ops now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521005343.1429642-4-dmitry.baryshkov@linaro.org
|
|
clocks"
Johan Hovold has pointed out that there are several deficiencies and a
race condition in the regmap_mux_safe ops that were merged. Revert the
commit that switches gcc-sc7280 driver to use regmap_mux_safe.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521005343.1429642-3-dmitry.baryshkov@linaro.org
|
|
clocks"
Johan Hovold has pointed out that there are several deficiencies and a
race condition in the regmap_mux_safe ops that were merged. Revert the
commit that switches gcc-sm8450 driver to use regmap_mux_safe.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521005343.1429642-2-dmitry.baryshkov@linaro.org
|
