summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-10-04ip6_gre: fix flowi6_proto value in xmit pathNicolas Dichtel
In xmit path, we build a flowi6 which will be used for the output route lookup. We are sending a GRE packet, neither IPv4 nor IPv6 encapsulated packet, thus the protocol should be IPPROTO_GRE. Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Reported-by: Matthieu Ternisien d'Ouville <matthieu.tdo@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-04mlx4: add a new xmit_more counterEric Dumazet
ethtool -S reports a new counter, tracking number of time doorbell was not triggered, because skb->xmit_more was set. $ ethtool -S eth0 | egrep "tx_packet|xmit_more" tx_packets: 2413288400 xmit_more: 666121277 I merged the tso_packet false sharing avoidance in this patch as well. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05score: Remove GENERIC_HAS_IOMAPRichard Weinberger
The symbol is an orphan, get rid of it. Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Lennox Wu <lennox.wu@gmail.com> Cc: Paul Bolle <pebolle@tiscali.nl> [Guenter Roeck: Merge with 3.17-rc3; update headline] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-10-04of/selftest: Use the resolver to fixup phandlesGrant Likely
The selftest data ends up causing duplicate phandles in the live tree for the time that the testcase data is inserted into the live tree. This is obviously a bad situation because anything attempting to read the tree while the selftests are running make resolve phandles to one of the testcase data nodes. Fix the problem by using the of_resolve_phandles() function to eliminate duplicates. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Gaurav Minocha <gaurav.minocha.os@gmail.com>
2014-10-04of: Introduce Device Tree resolve support.Pantelis Antoniou
Introduce support for dynamic device tree resolution. Using it, it is possible to prepare a device tree that's been loaded on runtime to be modified and inserted at the kernel live tree. Export of of_resolve and bug fix of double free by Guenter Roeck <groeck@juniper.net> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> [grant.likely: Don't need to select CONFIG_OF_DYNAMIC and CONFIG_OF_DEVICE] [grant.likely: Don't need to depend on OF or !SPARC] [grant.likely: Factor out duplicate code blocks into single function] Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-10-04of/selftest: Add a test for duplicate phandlesGrant Likely
All phandles in the tree should be unique. Add a testcase to make sure that this is so. Note: this testcase fails on the current kernel because the selftest code itself ends up adding duplicate phandles. Before this testcase is merged the selftest code needs to be modified to resolve phandles before adding them. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
2014-10-04of: Don't try to search when phandle == 0Grant Likely
A value of '0' isn't a valid phandle, so searching for a node with that phandle is pointless. It will result in nothing but false positives. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-10-04of/selftest: Test structure of device treeGrant Likely
Add a testcase to verify that the device tree is properly constructed and the lists are in a correct order. The new testcase gets run twice; once after adding the testcase data, and once after removing it again. It is run twice to make sure adding and removing the testcase data doesn't corrupt the data structure. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Gaurav Minocha <gaurav.minocha.os@gmail.com>
2014-10-04ASoC: Intel: byt-rt5640: fix coccinelle warningsFengguang Wu
sound/soc/intel/byt-rt5640.c:140:2-3: Unneeded semicolon Removes unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-04ASoC: fsl_esai doc: Add "fsl,vf610-esai" as compatible stringFabio Estevam
Since commit b21cc2f5fdfe224 ("ASoC: esai: Add VF610+ compatibles support.") the fsl_esai driver also accepts the "fsl,vf610-esai" compatible string. Update the documentation accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-05arch/score/include/asm/Kbuild: Add generic "serial.h"Chen Gang
The related error (with allmodconfig under score): CC [M] drivers/staging/speakup/speakup_acntpc.o In file included from drivers/staging/speakup/speakup_acntpc.c:33:0: drivers/staging/speakup/serialio.h:7:24: fatal error: asm/serial.h: No such file or directory #include <asm/serial.h> ^ compilation terminated. make[3]: *** [drivers/staging/speakup/speakup_acntpc.o] Error 1 make[2]: *** [drivers/staging/speakup] Error 2 make[1]: *** [drivers/staging] Error 2 make: *** [drivers] Error 2 Acked-by: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
2014-10-05score: remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch removes the use of the IRQF_DISABLED flag from arch/score/kernel/time.c It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: Lennox Wu <lennox.wu@gmail.com>
2014-10-05arch/score/mm/cache.c: Export 'flush_icache_range'Chen Gang
The related error (with allmodconfig under score): MODPOST 1365 modules ERROR: "flush_icache_range" [drivers/misc/lkdtm.ko] undefined! Acked-by: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
2014-10-05arch: score: Export necessary symbols in related filesChen Gang
'csum_partial_copy_from_user' and 'flush_dcache_page' are also needed by outside modules, so need export them in the related files. The related error (with allmodconfig under score): MODPOST 1365 modules ERROR: "csum_partial_copy_from_user" [net/rxrpc/af-rxrpc.ko] undefined! ERROR: "flush_dcache_page" [net/sunrpc/sunrpc.ko] undefined! Acked-by: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
2014-10-04Merge branch 'remove-unlikely' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus
2014-10-04Merge branch 'cleanup/blocksize-diet-part1' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus
2014-10-04Merge branch 'cleanup/misc-for-3.18' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus Signed-off-by: Chris Mason <clm@fb.com> Conflicts: fs/btrfs/extent_io.c
2014-10-04Merge tag 'tiny/kconfig-for-3.17' of ↵Linus Torvalds
https://git.kernel.org/pub/scm/linux/kernel/git/josh/linux Pull kconfig fixes for tiny setups from Josh Triplett: "Two Kconfig bugfixes for 3.17 related to tinification. These fixes make the Kconfig "General Setup" menu much more usable" * tag 'tiny/kconfig-for-3.17' of https://git.kernel.org/pub/scm/linux/kernel/git/josh/linux: init/Kconfig: Fix HAVE_FUTEX_CMPXCHG to not break up the EXPERT menu init/Kconfig: Hide printk log config if CONFIG_PRINTK=n
2014-10-04ASoC: da732x: Remove unnecessary KERN_ERR in pr_err()Masanari Iida
This patch remove unnecessary KERN_ERR in pr_err(). Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-04ASoC: simple-card: Fix detect gpio documentation.Dylan Reid
The device tree property uses '-' not '_'. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-03Merge branch 'gudp'David S. Miller
Tom Herbert says: ==================== net: Generic UDP Encapsulation Generic UDP Encapsulation (GUE) is UDP encapsulation protocol which encapsulates packets of various IP protocols. The GUE protocol is described in http://tools.ietf.org/html/draft-herbert-gue-01. The receive path of GUE is implemented in the FOU over UDP module (FOU). This includes a UDP encap receive function for GUE as well as GUE specific GRO functions. Management and configuration of GUE ports shares most of the same code with FOU. For the transmit path, the previous FOU support for IPIP, sit, and GRE was simply extended for GUE (when GUE is enabled insert the GUE header on transmit in addition to UDP header inserted for FOU). Semantically GUE is the same as FOU in that the encapsulation (UDP and GUE headers) that are inserted on transmission and removed on reception so that IP packet is processed with the inner header. This patch set includes: - Some fixes to FOU, removal of IPv4,v6 specific GRO functions - Support to configure a GUE receive port - Implementation of GUE receive path (normal and GRO) - Additions to ip_tunnel netlink to configure GUE - GUE header inserion in ip_tunnel transmit path v2: - Include net/gue.h in patch set Testing: I ran performance numbers using netperf TCP_RR with 200 streams, comparing encapsulation without GUE, encapsulation with GUE, and encapsulation with FOU. GRE TCP_STREAM IPv4, FOU, UDP checksum enabled 14.04% TX CPU utilization 13.17% RX CPU utilization 9211 Mbps IPv4, GUE, UDP checksum enabled 14.99% TX CPU utilization 13.79% RX CPU utilization 9185 Mbps IPv4, FOU, UDP checksum disabled 13.14% TX CPU utilization 23.18% RX CPU utilization 9277 Mbps IPv4, GUE, UDP checksum disabled 13.66% TX CPU utilization 23.57% RX CPU utilization 9184 Mbps TCP_RR IPv4, FOU, UDP checksum enabled 94.2% CPU utilization 155/249/460 90/95/99% latencies 1.17018e+06 tps IPv4, GUE, UDP checksum enabled 93.9% CPU utilization 158/253/472 90/95/99% latencies 1.15045e+06 tps IPIP TCP_STREAM FOU, UDP checksum enabled 15.28% TX CPU utilization 13.92% RX CPU utilization 9342 Mbps GUE, UDP checksum enabled 13.99% TX CPU utilization 13.34% RX CPU utilization 9210 Mbps FOU, UDP checksum disabled 15.08% TX CPU utilization 24.64% RX CPU utilization 9226 Mbps GUE, UDP checksum disabled 15.90% TX CPU utilization 24.77% RX CPU utilization 9197 Mbps TCP_RR FOU, UDP checksum enabled 94.23% CPU utilization 149/237/429 90/95/99% latencies 1.19553e+06 tps GUE, UDP checksum enabled 93.75% CPU utilization 152/243/442 90/95/99% latencies 1.17027e+06 tps SIT TCP_STREAM FOU, UDP checksum enabled 14.47% TX CPU utilization 14.58% RX CPU utilization 9106 Mbps GUE, UDP checksum enabled 15.09% TX CPU utilization 14.84% RX CPU utilization 9080 Mbps FOU, UDP checksum disabled 15.70% TX CPU utilization 27.93% RX CPU utilization 9097 Mbps GUE, UDP checksum disabled 15.04% TX CPU utilization 27.54% RX CPU utilization 9073 Mbps TCP_RR FOU, UDP checksum enabled 96.9% CPU utilization 170/281/581 90/95/99% latencies 1.03372e+06 tps GUE, UDP checksum enabled 97.16% CPU utilization 172/286/576 90/95/99% latencies 1.00469e+06 tps ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03ip_tunnel: Add GUE supportTom Herbert
This patch allows configuring IPIP, sit, and GRE tunnels to use GUE. This is very similar to fou excpet that we need to insert the GUE header in addition to the UDP header on transmit. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03gue: Receive side for Generic UDP EncapsulationTom Herbert
This patch adds support receiving for GUE packets in the fou module. The fou module now supports direct foo-over-udp (no encapsulation header) and GUE. To support this a type parameter is added to the fou netlink parameters. For a GUE socket we define gue_udp_recv, gue_gro_receive, and gue_gro_complete to handle the specifics of the GUE protocol. Most of the code to manage and configure sockets is common with the fou. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03fou: eliminate IPv4,v6 specific GRO functionsTom Herbert
This patch removes fou[46]_gro_receive and fou[46]_gro_complete functions. The v4 or v6 variants were chosen for the UDP offloads based on the address family of the socket this is not necessary or correct. Alternatively, this patch adds is_ipv6 to napi_gro_skb. This is set in udp6_gro_receive and unset in udp4_gro_receive. In fou_gro_receive the value is used to select the correct inet_offloads for the protocol of the outer IP header. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03ip_tunnel: Account for secondary encapsulation header in max_headroomTom Herbert
When adjusting max_header for the tunnel interface based on egress device we need to account for any extra bytes in secondary encapsulation (e.g. FOU). Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03init/Kconfig: Fix HAVE_FUTEX_CMPXCHG to not break up the EXPERT menuJosh Triplett
commit 03b8c7b623c80af264c4c8d6111e5c6289933666 ("futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test") added the HAVE_FUTEX_CMPXCHG symbol right below FUTEX. This placed it right in the middle of the options for the EXPERT menu. However, HAVE_FUTEX_CMPXCHG does not depend on EXPERT or FUTEX, so Kconfig stops placing items in the EXPERT menu, and displays the remaining several EXPERT items (starting with EPOLL) directly in the General Setup menu. Since both users of HAVE_FUTEX_CMPXCHG only select it "if FUTEX", make HAVE_FUTEX_CMPXCHG itself depend on FUTEX. With this change, the subsequent items display as part of the EXPERT menu again; the EMBEDDED menu now appears as the next top-level item in the General Setup menu, which makes General Setup much shorter and more usable. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: stable <stable@vger.kernel.org>
2014-10-03init/Kconfig: Hide printk log config if CONFIG_PRINTK=nJosh Triplett
The buffers sized by CONFIG_LOG_BUF_SHIFT and CONFIG_LOG_CPU_MAX_BUF_SHIFT do not exist if CONFIG_PRINTK=n, so don't ask about their size at all. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: stable <stable@vger.kernel.org>
2014-10-03Btrfs: send, don't delay dir move if there's a new parent inodeFilipe Manana
If between two snapshots we rename an existing directory named X to Y and make it a child (direct or not) of a new inode named X, we were delaying the move/rename of the former directory unnecessarily, which would result in attempting to rename the new directory from its orphan name to name X prematurely. Minimal reproducer: $ mkfs.btrfs -f /dev/vdd $ mount /dev/vdd /mnt $ mkdir -p /mnt/merlin/RC/OSD/Source $ btrfs subvolume snapshot -r /mnt /mnt/mysnap1 $ mkdir /mnt/OSD $ mv /mnt/merlin/RC/OSD /mnt/OSD/OSD-Plane_788 $ mv /mnt/OSD /mnt/merlin/RC $ btrfs subvolume snapshot -r /mnt /mnt/mysnap2 $ btrfs send /mnt/mysnap1 -f /tmp/1.snap $ btrfs send -p /mnt/mysnap1 /mnt/mysnap2 -f /tmp/2.snap $ mkfs.btrfs -f /dev/vdc $ mount /dev/vdc /mnt2 $ btrfs receive /mnt2 -f /tmp/1.snap $ btrfs receive /mnt2 -f /tmp/2.snap The second receive (from an incremental send) failed with the following error message: "rename o261-7-0 -> merlin/RC/OSD failed". This is a regression introduced in the 3.16 kernel. A test case for xfstests follows. Reported-by: Marc Merlin <marc@merlins.org> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-03btrfs: add more superblock checksDavid Sterba
Populate btrfs_check_super_valid() with checks that try to verify consistency of superblock by additional conditions that may arise from corrupted devices or bitflips. Some of tests are only hints and issue warnings instead of failing the mount, basically when the checks are derived from the data found in the superblock. Tested on a broken image provided by Qu. Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-03Btrfs: fix race in WAIT_SYNC ioctlSage Weil
We check whether transid is already committed via last_trans_committed and then search through trans_list for pending transactions. If last_trans_committed is updated by btrfs_commit_transaction after we check it (there is no locking), we will fail to find the committed transaction and return EINVAL to the caller. This has been observed occasionally by ceph-osd (which uses this ioctl heavily). Fix by rechecking whether the provided transid <= last_trans_committed after the search fails, and if so return 0. Signed-off-by: Sage Weil <sage@redhat.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-03Btrfs: be aware of btree inode write errors to avoid fs corruptionFilipe Manana
While we have a transaction ongoing, the VM might decide at any time to call btree_inode->i_mapping->a_ops->writepages(), which will start writeback of dirty pages belonging to btree nodes/leafs. This call might return an error or the writeback might finish with an error before we attempt to commit the running transaction. If this happens, we might have no way of knowing that such error happened when we are committing the transaction - because the pages might no longer be marked dirty nor tagged for writeback (if a subsequent modification to the extent buffer didn't happen before the transaction commit) which makes filemap_fdata[write|wait]_range unable to find such pages (even if they're marked with SetPageError). So if this happens we must abort the transaction, otherwise we commit a super block with btree roots that point to btree nodes/leafs whose content on disk is invalid - either garbage or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on 10826481664 wanted 25748 found 29562" when reading btree nodes/leafs from disk). Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's i_mapping would not be enough because we need to distinguish between log tree extents (not fatal) vs non-log tree extents (fatal) and because the next call to filemap_fdatawait_range() will catch and clear such errors in the mapping - and that call might be from a log sync and not from a transaction commit, which means we would not know about the error at transaction commit time. Also, checking for the eb flag EXTENT_BUFFER_IOERR at transaction commit time isn't done and would not be completely reliable, as the eb might be removed from memory and read back when trying to get it, which clears that flag right before reading the eb's pages from disk, making us not know about the previous write error. Using the new 3 flags for the btree inode also makes us achieve the goal of AS_EIO/AS_ENOSPC when writepages() returns success, started writeback for all dirty pages and before filemap_fdatawait_range() is called, the writeback for all dirty pages had already finished with errors - because we were not using AS_EIO/AS_ENOSPC, filemap_fdatawait_range() would return success, as it could not know that writeback errors happened (the pages were no longer tagged for writeback). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-03Btrfs: remove redundant btrfs_verify_qgroup_counts declaration.Fabian Frederick
Do like disk-io function declared under CONFIG_BTRFS_FS_RUN_SANITY_TESTS and keep prototype in qgroup.h only Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-03btrfs: fix shadow warning on cmpFabian Frederick
cmp was declared twice in btrfs_compare_trees resulting in a shadow warning. This patch renames second internal variable. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-03Btrfs: fix compilation errors under DEBUGFabian Frederick
bi_sector and bi_size moved to bi_iter since commit 4f024f3797c4 ("block: Abstract out bvec iterator") Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-03Btrfs: fix crash of btrfs_release_extent_buffer_pageLiu Bo
This is actually inspired by Filipe's patch. When write_one_eb() fails on submit_extent_page(), it'll give up writing this eb and mark it with EXTENT_BUFFER_IOERR. So if it's not the last page that encounter the failure, there are some left pages which remain DIRTY, and if a later COW on this eb happens, ie. eb is COWed and freed, it'd run into BUG_ON in btrfs_release_extent_buffer_page() for the DIRTY page, ie. BUG_ON(PageDirty(page)); This adds the missing clear_page_dirty_for_io() for the rest pages of eb. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-03Btrfs: add missing end_page_writeback on submit_extent_page failureFilipe Manana
If submit_extent_page() fails in write_one_eb(), we end up with the current page not marked dirty anymore, unlocked and marked for writeback. But we never end up calling end_page_writeback() against the page, which will make calls to filemap_fdatawait_range (e.g. at transaction commit time) hang forever waiting for the writeback bit to be cleared from the page. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-03btrfs: Fix the wrong condition judgment about subset extent mapQu Wenruo
Previous commit: btrfs: Fix and enhance merge_extent_mapping() to insert best fitted extent map is using wrong condition to judgement whether the range is a subset of a existing extent map. This may cause bug in btrfs no-holes mode. This patch will correct the judgment and fix the bug. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-03Btrfs: fix build_backref_tree issue with multiple shared blocksJosef Bacik
Marc Merlin sent me a broken fs image months ago where it would blow up in the upper->checked BUG_ON() in build_backref_tree. This is because we had a scenario like this block a -- level 4 (not shared) | block b -- level 3 (reloc block, shared) | block c -- level 2 (not shared) | block d -- level 1 (shared) | block e -- level 0 (shared) We go to build a backref tree for block e, we notice block d is shared and add it to the list of blocks to lookup it's backrefs for. Now when we loop around we will check edges for the block, so we will see we looked up block c last time. So we lookup block d and then see that the block that points to it is block c and we can just skip that edge since we've already been up this path. The problem is because we clear need_check when we see block d (as it is shared) we never add block b as needing to be checked. And because block c is in our path already we bail out before we walk up to block b and add it to the backref check list. To fix this we need to reset need_check if we trip over a block that doesn't need to be checked. This will make sure that any subsequent blocks in the path as we're walking up afterwards are added to the list to be processed. With this patch I can now mount Marc's fs image and it'll complete the balance without panicing. Thanks, Reported-by: Marc MERLIN <marc@merlins.org> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-03Btrfs: cleanup error handling in build_backref_treeJosef Bacik
When balance panics it tends to panic in the BUG_ON(!upper->checked); test, because it means it couldn't build the backref tree properly. This is annoying to users and frankly a recoverable error, nothing in this function is actually fatal since it is just an in-memory building of the backrefs for a given bytenr. So go through and change all the BUG_ON()'s to ASSERT()'s, and fix the BUG_ON(!upper->checked) thing to just return an error. This patch also fixes the error handling so it tears down the work we've done properly. This code was horribly broken since we always just panic'ed instead of actually erroring out, so it needed to be completely re-worked. With this patch my broken image no longer panics when I mount it. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-04Merge branch 'next' of ↵Michael Ellerman
git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git Freescale updates from Scott (27 commits): "Highlights include DMA32 zone support (SATA, USB, etc now works on 64-bit FSL kernels), MSI changes, 8xx optimizations and cleanup, t104x board support, and PrPMC PCI enumeration."
2014-10-03net: do not export skb_gro_receive()Eric Dumazet
skb_gro_receive() is only called from tcp_gro_receive() which is not in a module. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03drivers/net/irda/Kconfig: Let SH_IRDA depend on HAS_IOMEMChen Gang
SH_IRDA needs HAS_IOMEM, so depend on it. The related error(with allmodconfig under um): CC [M] drivers/net/irda/sh_irda.o drivers/net/irda/sh_irda.c: In function ‘sh_irda_probe’: drivers/net/irda/sh_irda.c:776:2: error: implicit declaration of function ‘ioremap_nocache’ [-Werror=implicit-function-declaration] self->membase = ioremap_nocache(res->start, resource_size(res)); ^ drivers/net/irda/sh_irda.c:776:16: warning: assignment makes pointer from integer without a cast [enabled by default] self->membase = ioremap_nocache(res->start, resource_size(res)); ^ drivers/net/irda/sh_irda.c:821:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(self->membase); ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03drivers/net/ethernet/marvell/Kconfig: Let PXA168_ETH depend on HAS_IOMEMChen Gang
PXA168_ETH need HAS_IOMEM, so depend on it, the related error (with allmodconfig under um): CC [M] drivers/net/ethernet/marvell/pxa168_eth.o drivers/net/ethernet/marvell/pxa168_eth.c: In function ‘pxa168_eth_probe’: drivers/net/ethernet/marvell/pxa168_eth.c:1605:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(pep->base); ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03drivers/net/dsa/Kconfig: Let NET_DSA_BCM_SF2 depend on HAS_IOMEMChen Gang
NET_DSA_BCM_SF2 need HAS_IOMEM, so depend on it, the related error (with allmodconfig under um): CC [M] drivers/net/dsa/bcm_sf2.o drivers/net/dsa/bcm_sf2.c: In function ‘bcm_sf2_sw_setup’: drivers/net/dsa/bcm_sf2.c:487:3: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(*base); ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03drivers/net/can/Kconfig: Let CAN_AT91 depend on HAS_IOMEMChen Gang
CAN_AT91 needs HAS_IOMEM, so depends on it. The related error (with allmodconfig under um): CC [M] drivers/net/can/at91_can.o drivers/net/can/at91_can.c: In function ‘at91_can_probe’: drivers/net/can/at91_can.c:1329:2: error: implicit declaration of function ‘ioremap_nocache’ [-Werror=implicit-function-declaration] addr = ioremap_nocache(res->start, resource_size(res)); ^ drivers/net/can/at91_can.c:1329:7: warning: assignment makes pointer from integer without a cast [enabled by default] addr = ioremap_nocache(res->start, resource_size(res)); ^ drivers/net/can/at91_can.c:1384:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(addr); ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-10-02 This series contains updates to fm10k, igb, ixgbe and i40e. Alex provides two updates to the fm10k driver. First reduces the buffer size to 2k for all page sizes, since most frames only have a 1500 MTU so supporting a buffer size larger than this is somewhat wasteful. Second fixes an issue where the number of transmit queues was not being updated, so added the lines necessary to update the number of transmit queues. Rick Jones provides two patches to convert ixgbe, igb and i40e to use dev_consume_skb_any(). Emil provides two patches for ixgbe, first cleans up a couple of wait loops on auto-negotiation that were not needed. Second fixes an issue reported by Fujitsu/Red Hat, which consolidates the logic behind the dynamically setting of TXDCTL.WTHRESH depending on interrupt throttle rate (ITR) setting regardless of BQL. Ethan Zhao provides a cleanup patch for ixgbe where he noticed a duplicate define. Bernhard Kaindl provides a patch for igb to remove a source of latency spikes by not calling code that uses mdelay() for feeding a PHY stat while being called with a spinlock held. Todd bumps the igb version based on the recent changes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03Merge branch 'mlx5-next'David S. Miller
Eli Cohen says: ==================== mlx5 update for 3.18 This series integrates a new mechanism for populating and extracting field values used in the driver/firmware interaction around command mailboxes. Changes from V1: - Remove unused definition of memcpy_cpu_to_be32() - Remove definitions of non_existent_*() and use BUILD_BUG_ON() instead. - Added a patch one line patch to add support for ConnectX-4 devices. Changes from V0: - trimmed the auto-generated file to a minimum, as required by the reviewers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03net/mlx5_core: Add ConnectX-4 to list of supported devicesEli Cohen
Add the upcoming ConnectX-4 device to the list of supported devices by then mlx5 driver. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03net/mlx5_core: Identify resources by their typeEli Cohen
This patch puts a common part as the first field of mlx5_core_qp. This field is used to identify which resource generated an event. This is required since upcoming new resource types such as DC targets are allocated for the same numerical space as regular QPs and may generate the same events. By searching the resource in the same table we can then look at the common field to identify the resource. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03net/mlx5_core: use set/get macros in device capsEli Cohen
Transform device capabilities related commands to use set/get macros to manipulate command mailboxes. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 15:50:17 +0000