summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-06-19mm/shmem, swap: fix softlockup with mTHP swapinKairui Song
Following softlockup can be easily reproduced on my test machine with: echo always > /sys/kernel/mm/transparent_hugepage/hugepages-64kB/enabled swapon /dev/zram0 # zram0 is a 48G swap device mkdir -p /sys/fs/cgroup/memory/test echo 1G > /sys/fs/cgroup/test/memory.max echo $BASHPID > /sys/fs/cgroup/test/cgroup.procs while true; do dd if=/dev/zero of=/tmp/test.img bs=1M count=5120 cat /tmp/test.img > /dev/null rm /tmp/test.img done Then after a while: watchdog: BUG: soft lockup - CPU#0 stuck for 763s! [cat:5787] Modules linked in: zram virtiofs CPU: 0 UID: 0 PID: 5787 Comm: cat Kdump: loaded Tainted: G L 6.15.0.orig-gf3021d9246bc-dirty #118 PREEMPT(voluntary)· Tainted: [L]=SOFTLOCKUP Hardware name: Red Hat KVM/RHEL-AV, BIOS 0.0.0 02/06/2015 RIP: 0010:mpol_shared_policy_lookup+0xd/0x70 Code: e9 b8 b4 ff ff 31 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 41 54 55 53 <48> 8b 1f 48 85 db 74 41 4c 8d 67 08 48 89 fb 48 89 f5 4c 89 e7 e8 RSP: 0018:ffffc90002b1fc28 EFLAGS: 00000202 RAX: 00000000001c20ca RBX: 0000000000724e1e RCX: 0000000000000001 RDX: ffff888118e214c8 RSI: 0000000000057d42 RDI: ffff888118e21518 RBP: 000000000002bec8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000bf4 R11: 0000000000000000 R12: 0000000000000001 R13: 00000000001c20ca R14: 00000000001c20ca R15: 0000000000000000 FS: 00007f03f995c740(0000) GS:ffff88a07ad9a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f03f98f1000 CR3: 0000000144626004 CR4: 0000000000770eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> shmem_alloc_folio+0x31/0xc0 shmem_swapin_folio+0x309/0xcf0 ? filemap_get_entry+0x117/0x1e0 ? xas_load+0xd/0xb0 ? filemap_get_entry+0x101/0x1e0 shmem_get_folio_gfp+0x2ed/0x5b0 shmem_file_read_iter+0x7f/0x2e0 vfs_read+0x252/0x330 ksys_read+0x68/0xf0 do_syscall_64+0x4c/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f03f9a46991 Code: 00 48 8b 15 81 14 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d 35 97 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec RSP: 002b:00007fff3c52bd28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007f03f9a46991 RDX: 0000000000040000 RSI: 00007f03f98ba000 RDI: 0000000000000003 RBP: 00007fff3c52bd50 R08: 0000000000000000 R09: 00007f03f9b9a380 R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000 R13: 00007f03f98ba000 R14: 0000000000000003 R15: 0000000000000000 </TASK> The reason is simple, readahead brought some order 0 folio in swap cache, and the swapin mTHP folio being allocated is in conflict with it, so swapcache_prepare fails and causes shmem_swap_alloc_folio to return -EEXIST, and shmem simply retries again and again causing this loop. Fix it by applying a similar fix for anon mTHP swapin. The performance change is very slight, time of swapin 10g zero folios with shmem (test for 12 times): Before: 2.47s After: 2.48s [kasong@tencent.com: add comment] Link: https://lkml.kernel.org/r/20250610181645.45922-1-ryncsn@gmail.com Link: https://lkml.kernel.org/r/20250610181645.45922-1-ryncsn@gmail.com Link: https://lkml.kernel.org/r/20250609171751.36305-1-ryncsn@gmail.com Fixes: 1dd44c0af4fa ("mm: shmem: skip swapcache for swapin of synchronous swap device") Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: Barry Song <baohua@kernel.org> Acked-by: Nhat Pham <nphamcs@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Chris Li <chrisl@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Usama Arif <usamaarif642@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-06-19scsi: fnic: Fix missing DMA mapping error in fnic_send_frame()Thomas Fourier
dma_map_XXX() can fail and should be tested for errors with dma_mapping_error(). Fixes: a63e78eb2b0f ("scsi: fnic: Add support for fabric based solicited requests and responses") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250618065715.14740-2-fourier.thomas@gmail.com Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com> Reviewed-by: John Menghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-19scsi: fnic: Set appropriate logging level for log messageKaran Tilak Kumar
Replace KERN_INFO with KERN_DEBUG for a log message. Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/stable/20250612002212.4144-1-kartilak%40cisco.com Link: https://lore.kernel.org/r/20250618003431.6314-4-kartilak@cisco.com Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-19scsi: fnic: Add and improve logs in FDMI and FDMI ABTS pathsKaran Tilak Kumar
Add logs in FDMI and FDMI ABTS paths. Modify log text in these paths. Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250618003431.6314-3-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-19scsi: fnic: Turn off FDMI ACTIVE flags on link downKaran Tilak Kumar
When the link goes down and comes up, FDMI requests are not sent out anymore. Fix bug by turning off FNIC_FDMI_ACTIVE when the link goes down. Fixes: 09c1e6ab4ab2 ("scsi: fnic: Add and integrate support for FDMI") Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Tested-by: Karan Tilak Kumar <kartilak@cisco.com> Cc: stable@vger.kernel.org Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250618003431.6314-2-kartilak@cisco.com Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-19scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times outKaran Tilak Kumar
When both the RHBA and RPA FDMI requests time out, fnic reuses a frame to send ABTS for each of them. On send completion, this causes an attempt to free the same frame twice that leads to a crash. Fix crash by allocating separate frames for RHBA and RPA, and modify ABTS logic accordingly. Tested by checking MDS for FDMI information. Tested by using instrumented driver to: - Drop PLOGI response - Drop RHBA response - Drop RPA response - Drop RHBA and RPA response - Drop PLOGI response + ABTS response - Drop RHBA response + ABTS response - Drop RPA response + ABTS response - Drop RHBA and RPA response + ABTS response for both of them Fixes: 09c1e6ab4ab2 ("scsi: fnic: Add and integrate support for FDMI") Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Tested-by: Arun Easi <aeasi@cisco.com> Co-developed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Arun Easi <aeasi@cisco.com> Tested-by: Karan Tilak Kumar <kartilak@cisco.com> Cc: stable@vger.kernel.org Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250618003431.6314-1-kartilak@cisco.com Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-19scsi: ufs: core: Fix clk scaling to be conditional in reset and restoreanvithdosapati
In ufshcd_host_reset_and_restore(), scale up clocks only when clock scaling is supported. Without this change CPU latency is voted for 0 (ufshcd_pm_qos_update) during resume unconditionally. Signed-off-by: anvithdosapati <anvithdosapati@google.com> Link: https://lore.kernel.org/r/20250616085734.2133581-1-anvithdosapati@google.com Fixes: a3cd5ec55f6c ("scsi: ufs: add load based scaling of UFS gear") Cc: stable@vger.kernel.org Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-19scsi: megaraid_sas: Fix invalid node indexChen Yu
On a system with DRAM interleave enabled, out-of-bound access is detected: megaraid_sas 0000:3f:00.0: requested/available msix 128/128 poll_queue 0 ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x2b __ubsan_handle_out_of_bounds.cold+0x46/0x4b megasas_alloc_irq_vectors+0x149/0x190 [megaraid_sas] megasas_probe_one.cold+0xa4d/0x189c [megaraid_sas] local_pci_probe+0x42/0x90 pci_device_probe+0xdc/0x290 really_probe+0xdb/0x340 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8b/0xe0 bus_add_driver+0x142/0x220 driver_register+0x72/0xd0 megasas_init+0xdf/0xff0 [megaraid_sas] do_one_initcall+0x57/0x310 do_init_module+0x90/0x250 init_module_from_file+0x85/0xc0 idempotent_init_module+0x114/0x310 __x64_sys_finit_module+0x65/0xc0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix it accordingly. Signed-off-by: Chen Yu <yu.c.chen@intel.com> Link: https://lore.kernel.org/r/20250604042556.3731059-1-yu.c.chen@intel.com Fixes: 8049da6f3943 ("scsi: megaraid_sas: Use irq_set_affinity_and_hint()") Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-19net: ti: icssg-prueth: Add prp offload support to ICSSG driverHimanshu Mittal
Add support for ICSSG PRP mode which supports offloading of: - Packet duplication and PRP trailer insertion - Packet duplicate discard and PRP trailer removal Signed-off-by: Himanshu Mittal <h-mittal1@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250618175536.430568-1-h-mittal1@ti.com Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19Merge tag 'spi-fix-v6.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fix from Mark Brown: "One fix here from Thierry, fixing crashes caused by attempting to do cache sync operations on uncached memory on Tegra platforms" * tag 'spi-fix-v6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: tegra210-qspi: Remove cache operations
2025-06-19Merge tag 'regulator-fix-v6.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "One patch here from Heiko which fixes stability issues on some Rockchip platforms by implementing soft start support and providing startup time information for their regulators" * tag 'regulator-fix-v6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: fan53555: add enable_time support and soft-start times
2025-06-19Merge branch ↵Jakub Kicinski
'ref_tracker-add-ability-to-register-a-debugfs-file-for-a-ref_tracker_dir' Jeff Layton says: ==================== ref_tracker: add ability to register a debugfs file for a ref_tracker_dir For those just joining in, this series adds a new top-level "ref_tracker" debugfs directory, and has each ref_tracker_dir register a file in there as part of its initialization. It also adds the ability to register a symlink with a more human-usable name that points to the file, and does some general cleanup of how the ref_tracker object names are handled. v14: https://lore.kernel.org/20250610-reftrack-dbgfs-v14-0-efb532861428@kernel.org v13: https://lore.kernel.org/20250603-reftrack-dbgfs-v13-0-7b2a425019d8@kernel.org v12: https://lore.kernel.org/20250529-reftrack-dbgfs-v12-0-11b93c0c0b6e@kernel.org v11: https://lore.kernel.org/20250528-reftrack-dbgfs-v11-0-94ae0b165841@kernel.org v10: https://lore.kernel.org/20250527-reftrack-dbgfs-v10-0-dc55f7705691@kernel.org v9: https://lore.kernel.org/20250509-reftrack-dbgfs-v9-0-8ab888a4524d@kernel.org v8: https://lore.kernel.org/20250507-reftrack-dbgfs-v8-0-607717d3bb98@kernel.org v7: https://lore.kernel.org/20250505-reftrack-dbgfs-v7-0-f78c5d97bcca@kernel.org v6: https://lore.kernel.org/20250430-reftrack-dbgfs-v6-0-867c29aff03a@kernel.org v5: https://lore.kernel.org/20250428-reftrack-dbgfs-v5-0-1cbbdf2038bd@kernel.org v4: https://lore.kernel.org/20250418-reftrack-dbgfs-v4-0-5ca5c7899544@kernel.org v3: https://lore.kernel.org/20250417-reftrack-dbgfs-v3-0-c3159428c8fb@kernel.org v2: https://lore.kernel.org/20250415-reftrack-dbgfs-v2-0-b18c4abd122f@kernel.org v1: https://lore.kernel.org/20250414-reftrack-dbgfs-v1-0-f03585832203@kernel.org ==================== Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-0-24fc37ead144@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19ref_tracker: eliminate the ref_tracker_dir name fieldJeff Layton
Now that we have dentries and the ability to create meaningful symlinks to them, don't keep a name string in each tracker. Switch the output format to print "class@address", and drop the name field. Also, add a kerneldoc header for ref_tracker_dir_init(). Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-9-24fc37ead144@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: add symlinks to ref_tracker_dir for netnsJeff Layton
After assigning the inode number to the namespace, use it to create a unique name for each netns refcount tracker with the ns.inum and net_cookie values in it, and register a symlink to the debugfs file for it. init_net is registered before the ref_tracker dir is created, so add a late_initcall() to register its files and symlinks. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-8-24fc37ead144@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19ref_tracker: add a way to create a symlink to the ref_tracker_dir debugfs fileJeff Layton
Add the ability for a subsystem to add a user-friendly symlink that points to a ref_tracker_dir's debugfs file. Add a separate debugfs_symlinks xarray and use that to track symlinks. The reaper workqueue job will remove symlinks before their corresponding dentries. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-7-24fc37ead144@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19ref_tracker: automatically register a file in debugfs for a ref_tracker_dirJeff Layton
Currently, there is no convenient way to see the info that the ref_tracking infrastructure collects. Attempt to create a file in debugfs when called from ref_tracker_dir_init(). The file is given the name "class@%px", as having the unmodified address is helpful for debugging. This should be safe since this directory is only accessible by root While ref_tracker_dir_init() is generally called from a context where sleeping is OK, ref_tracker_dir_exit() can be called from anywhere. Thus, dentry cleanup must be handled asynchronously. Add a new global xarray that has entries with the ref_tracker_dir pointer as the index and the corresponding debugfs dentry pointer as the value. Instead of removing the debugfs dentry, have ref_tracker_dir_exit() set a mark on the xarray entry and schedule a workqueue job. The workqueue job then walks the xarray looking for marked entries, and removes their xarray entries and the debugfs dentries. Because of this, the debugfs dentry can outlive the corresponding ref_tracker_dir. Have ref_tracker_debugfs_show() take extra care to ensure that it's safe to dereference the dir pointer before using it. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-6-24fc37ead144@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19ref_tracker: allow pr_ostream() to print directly to a seq_fileJeff Layton
Allow pr_ostream to also output directly to a seq_file without an intermediate buffer. The first caller of +ref_tracker_dir_seq_print() will come in a later patch, so mark that __maybe_unused for now. That designation will be removed once it is used. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-5-24fc37ead144@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19ref_tracker: add a static classname string to each ref_tracker_dirJeff Layton
A later patch in the series will be adding debugfs files for each ref_tracker that get created in ref_tracker_dir_init(). The format will be "class@%px". The current "name" string can vary between ref_tracker_dir objects of the same type, so it's not suitable for this purpose. Add a new "class" string to the ref_tracker dir that describes the the type of object (sans any individual info for that object). Also, in the i915 driver, gate the creation of debugfs files on whether the dentry pointer is still set to NULL. CI has shown that the ref_tracker_dir can be initialized more than once. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-4-24fc37ead144@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19ref_tracker: have callers pass output function to pr_ostream()Jeff Layton
In a later patch, we'll be adding a 3rd mechanism for outputting ref_tracker info via seq_file. Instead of a conditional, have the caller set a pointer to an output function in struct ostream. As part of this, the log prefix must be explicitly passed in, as it's too late for the pr_fmt macro. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-3-24fc37ead144@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19ref_tracker: add a top level debugfs directory for ref_trackerJeff Layton
Add a new "ref_tracker" directory in debugfs. Each individual refcount tracker can register files under there to display info about currently-held references. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-2-24fc37ead144@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19ref_tracker: don't use %pK in pr_ostream() outputJeff Layton
As Thomas Weißschuh points out [1], it is now preferable to use %p instead of hashed pointers with printk(), since raw pointers should no longer be leaked into the kernel log. Change the ref_tracker infrastructure to use %p instead of %pK in its formats. [1]: https://lore.kernel.org/netdev/20250414-restricted-pointers-net-v1-0-12af0ce46cdd@linutronix.de/ Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-1-24fc37ead144@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19Merge branch 'netpoll-code-organization-improvements'Jakub Kicinski
Breno Leitao says: ==================== netpoll: Code organization improvements The netpoll_setup() function has grown complex over time, mixing different error handling and concerns like carrier waiting, IPv4 address retrieval, and IPv6 address retrieval all within a single function, which is huge (127 LoC). This patch series refactors the netpoll_setup() function to improve code organization and readability by extracting logical blocks into dedicated helper functions. netpoll_setup() length is reduced to 72 LoC. This series breaks down these responsibilities into focused helper functions. The changes are purely structural with no functional modifications. This changes were tested with the netconsole tests and the netpoll selftest (WIP)[1] Link: https://lore.kernel.org/20250612-netpoll_test-v1-1-4774fd95933f@debian.org [1] ==================== Link: https://patch.msgid.link/20250618-netpoll_ip_ref-v1-0-c2ac00fe558f@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19Merge branch 'netdevsim-implement-rx-statistics-using-netdev_pcpu_stat_dstats'Jakub Kicinski
Breno Leitao says: ==================== netdevsim: implement RX statistics using NETDEV_PCPU_STAT_DSTATS The netdevsim driver previously lacked RX statistics support, which prevented its use with the GenerateTraffic() test framework, as this framework verifies traffic flow by checking RX byte counts. This patch migrates netdevsim from its custom statistics collection to the NETDEV_PCPU_STAT_DSTATS framework, as suggested by Jakub. This change not only standardizes the statistics handling but also adds the necessary RX statistics support required by the test framework. v3: https://lore.kernel.org/20250617-netdevsim_stat-v3-0-afe4bdcbf237@debian.org v2: https://lore.kernel.org/20250613-netdevsim_stat-v2-0-98fa38836c48@debian.org v1: https://lore.kernel.org/20250611-netdevsim_stat-v1-0-c11b657d96bf@debian.org ==================== Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-0-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19netpoll: Extract IPv6 address retrieval functionBreno Leitao
Extract the IPv6 address retrieval logic from netpoll_setup() into a dedicated helper function netpoll_take_ipv6() to improve code organization and readability. The function handles obtaining the local IPv6 address from the network device, including proper address type matching between local and remote addresses (link-local vs global), and includes appropriate error handling when IPv6 is not supported or no suitable address is available. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250618-netpoll_ip_ref-v1-3-c2ac00fe558f@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19netpoll: extract IPv4 address retrieval into helper functionBreno Leitao
Move the IPv4 address retrieval logic from netpoll_setup() into a separate netpoll_take_ipv4() function to improve code organization and readability. This change consolidates the IPv4-specific logic and error handling into a dedicated function while maintaining the same functionality. No functional changes. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250618-netpoll_ip_ref-v1-2-c2ac00fe558f@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19netpoll: Extract carrier wait functionBreno Leitao
Extract the carrier waiting logic into a dedicated helper function netpoll_wait_carrier() to improve code readability and reduce duplication in netpoll_setup(). Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250618-netpoll_ip_ref-v1-1-c2ac00fe558f@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net/smc: remove unused input parameters in smc_buf_get_slotWang Liang
The input parameter "compressed_bufsize" of smc_buf_get_slot is unused, remove it. Signed-off-by: Wang Liang <wangliang74@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250618103342.1423913-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19netdevsim: account dropped packet length in stats on queue freeBreno Leitao
Add a call to dev_dstats_rx_dropped_add() in nsim_queue_free() to account for the number of packets dropped when purging the skb queue. This improves the accuracy of RX drop statistics reported by netdevsim. local_bh_{disable, enable}() protection is used to disable preemption, which is necessary given that dev_dstats_rx_dropped_add() access this_cpu_ptr(). See discussion in [1]. Link: https://lore.kernel.org/all/20250617055934.3fd9d322@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-4-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19tcp: tcp_time_to_recover() cleanupEric Dumazet
tcp_time_to_recover() does not need the @flag argument. Its first parameter can be marked const, and of tcp_sock type. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250618091246.1260322-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: add dev_dstats_rx_dropped_add() helperBreno Leitao
Introduce the dev_dstats_rx_dropped_add() helper to allow incrementing the rx_drops per-CPU statistic by an arbitrary value, rather than just one. This is useful for drivers or code paths that need to account for multiple dropped packets at once, such as when dropping entire queues. Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-3-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19neighbour: add support for NUD_PERMANENT proxy entriesNicolas Escande
As discussesd before in [0] proxy entries (which are more configuration than runtime data) should stay when the link (carrier) goes does down. This is what happens for regular neighbour entries. So lets fix this by: - storing in proxy entries the fact that it was added as NUD_PERMANENT - not removing NUD_PERMANENT proxy entries when the carrier goes down (same as how it's done in neigh_flush_dev() for regular neigh entries) [0]: https://lore.kernel.org/netdev/c584ef7e-6897-01f3-5b80-12b53f7b4bf4@kernel.org/ Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250617141334.3724863-1-nico.escande@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19netdevsim: collect statistics at RX sideBreno Leitao
When the RX side of netdevsim was added, the RX statistics were missing, making the driver unusable for GenerateTraffic() test framework. This patch adds proper statistics tracking on RX side, complementing the TX path. Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-2-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19netdevsim: migrate to dstats stats collectionBreno Leitao
Replace custom statistics tracking with the kernel's dstats infrastructure to simplify code and improve consistency with other network drivers. This change: - Sets dev->pcpu_stat_type = NETDEV_PCPU_STAT_DSTATS for automatic automatic allocation and deallocation. - Removes manual stats fields and their update - Replaces custom nsim_get_stats64() with dev_get_stats() - Uses dev_dstats_tx_add() and dev_dstats_tx_dropped() helpers - Eliminates the need for manual synchronization primitives The dstats framework provides the same functionality with less code. Suggested-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-1-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-20Merge tag 'drm-xe-fixes-2025-06-19' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes Driver Changes: - A workaround update (Vinay) - Fix memset on iomem (Lucas) - Fix early wedge on GuC Load failure (Daniele) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://lore.kernel.org/r/aFQ03kNzhbiNK7gW@fedora
2025-06-20Merge tag 'drm-misc-fixes-2025-06-19' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes drm-misc-fixes for v6.16-rc3: - vivante scheduler fix. - v3d null pointer crash fix. - fix backlight, booting GSP-RM, and potential integer shift overflow in nouveau. - fix compiler warnings about unused linux/export.h - fix malidp unknown modifier spam. - fix for ssd130x. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://lore.kernel.org/r/d44bab7b-01f8-45a8-a7f4-5d3d563d2f9d@linux.intel.com
2025-06-19net: mana: Record doorbell physical address in PF modeLong Li
MANA supports RDMA in PF mode. The driver should record the doorbell physical address when in PF mode. The doorbell physical address is used by the RDMA driver to map doorbell pages of the device to user-mode applications through RDMA verbs interface. In the past, they have been mapped to user-mode while the device is in VF mode. With the support for PF mode implemented, also expose those pages in PF mode. Support for PF mode is implemented in 290e5d3c49f6 ("net: mana: Add support for Multi Vports on Bare metal") Signed-off-by: Long Li <longli@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1750210606-12167-1-git-send-email-longli@linuxonhyperv.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: mana: Set tx_packets to post gso processing packet countShradha Gupta
Allow tx_packets and tx_bytes counter in the driver to represent the packets transmitted post GSO processing. Currently they are populated as bigger pre-GSO packets and bytes Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-19net: sfp: add quirk for Potron SFP+ XGSPON ONU StickChris Morgan
Add quirk for Potron SFP+ XGSPON ONU Stick (YV SFP+ONT-XGSPON). This device uses pins 2 and 7 for UART communication, so disable TX_FAULT and LOS. Additionally as it is an embedded system in an SFP+ form factor provide it enough time to fully boot before we attempt to use it. https://www.potrontec.com/index/index/list/cat_id/2.html#11-83 https://pon.wiki/xgs-pon/ont/potron-technology/x-onu-sfpp/ Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://patch.msgid.link/20250617180324.229487-1-macroalpha82@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: Convert tasklet API to new bottom half workqueue mechanismJun Miao
Migrate tasklet APIs to the new bottom half workqueue mechanism. It replaces all occurrences of tasklet usage with the appropriate workqueue APIs throughout the usbnet driver. This transition ensures compatibility with the latest design and enhances performance. Signed-off-by: Jun Miao <jun.miao@intel.com> Link: https://patch.msgid.link/20250618173923.950510-1-jun.miao@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19igc: Make the const read-only array supported_sizes staticColin Ian King
Don't populate the const read-only array supported_sizes on the stack at run time, instead make it static. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>> Link: https://patch.msgid.link/20250618135408.1784120-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19Merge branch 'convert-lan78xx-driver-to-the-phylink'Jakub Kicinski
Oleksij Rempel says: ==================== convert lan78xx driver to the PHYLINK This series converts the lan78xx driver to use the PHYLINK framework, which enhances PHY and MAC management. The changes also streamline the driver by removing unused elements and improving link status reporting. This is the final part of the previously split conversion series: https://lore.kernel.org/all/20250428130542.3879769-1-o.rempel@pengutronix.de/ Tested on EVB_LAN7850. ==================== Link: https://patch.msgid.link/20250618122602.3156678-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: lan78xx: remove unused struct membersOleksij Rempel
Remove unused members from struct lan78xx_net, including: driver_priv suspend_count mdix_ctrl These fields are no longer used in the driver and can be safely removed as part of a cleanup. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250618122602.3156678-7-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: lan78xx: Integrate EEE support with phylink LPI APIOleksij Rempel
Refactor Energy-Efficient Ethernet (EEE) support in the LAN78xx driver to fully integrate with the phylink Low Power Idle (LPI) API. This includes: - Replacing direct calls to `phy_ethtool_get_eee` and `phy_ethtool_set_eee` with `phylink_ethtool_get_eee` and `phylink_ethtool_set_eee`. - Implementing `.mac_enable_tx_lpi` and `.mac_disable_tx_lpi` to control LPI transitions via phylink. - Configuring `lpi_timer_default` to align with recommended values from LAN7800 documentation. - ensure EEE is disabled on controller reset Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250618122602.3156678-6-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: lan78xx: port link settings to phylink APIOleksij Rempel
Refactor lan78xx_get_link_ksettings and lan78xx_set_link_ksettings to use the phylink API (phylink_ethtool_ksettings_get and phylink_ethtool_ksettings_set) instead of directly interfacing with the PHY. This change simplifies the code and ensures better integration with the phylink framework for link management. Additionally, the explicit calls to usb_autopm_get_interface() and usb_autopm_put_interface() have been removed. These were originally needed to manage USB power management during register accesses. However, lan78xx_mdiobus_read() and lan78xx_mdiobus_write() already handle USB auto power management internally, ensuring that the interface remains active when necessary. Since there are no other direct register accesses in these functions that require explicit power management handling, the extra calls have become redundant and are no longer needed. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250618122602.3156678-5-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: lan78xx: Use ethtool_op_get_link to reflect current link statusOleksij Rempel
Replace the custom lan78xx_get_link implementation with the standard ethtool_op_get_link helper, which uses netif_carrier_ok to reflect the current link status accurately. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250618122602.3156678-4-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: lan78xx: Rename EVENT_LINK_RESET to EVENT_PHY_INT_ACKOleksij Rempel
The EVENT_LINK_RESET macro currently triggers deferred work after a PHY interrupt. Prior to PHYLINK conversion, this work included reconfiguring the MAC and PHY, effectively performing a 'link reset'. However, after porting the driver to the PHYLINK framework, the logic associated with this event now solely handles the acknowledgment of the PHY interrupt. The MAC and PHY reconfiguration is now managed by PHYLINK's dedicated callbacks. To accurately reflect its current, narrowed functionality, rename EVENT_LINK_RESET to EVENT_PHY_INT_ACK. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250618122602.3156678-3-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: lan78xx: Convert to PHYLINK for improved PHY and MAC managementOleksij Rempel
Convert the LAN78xx USB Ethernet driver to use the PHYLINK framework for managing PHY and MAC interactions. This improves consistency with other network drivers, simplifies pause frame handling, and enables cleaner suspend/resume support. Key changes: - Replace all PHYLIB-based logic with PHYLINK equivalents: - Replace phy_connect()/phy_disconnect() with phylink_connect_phy() - Replace phy_start()/phy_stop() with phylink_start()/phylink_stop() - Replace pauseparam handling with phylink_ethtool_get/set_pauseparam() - Introduce lan78xx_phylink_setup() to configure PHYLINK - Add phylink MAC operations: - lan78xx_mac_config() - lan78xx_mac_link_up() - lan78xx_mac_link_down() - Remove legacy link state handling: - lan78xx_link_status_change() - lan78xx_link_reset() - Handle fixed-link fallback for LAN7801 using phylink_set_fixed_link() - Replace deprecated flow control handling with phylink-managed logic Power management: - Switch suspend/resume paths to use phylink_suspend()/phylink_resume() - Ensure proper use of rtnl_lock() where required - Note: full runtime testing of power management is currently limited due to hardware setup constraints Note: Conversion of EEE (Energy Efficient Ethernet) handling to the PHYLINK-managed API will be done in a follow-up patch. For now, the legacy EEE enable logic is preserved in mac_link_up(). Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250618122602.3156678-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: gianfar: Use device_get_named_child_node_count()Matti Vaittinen
We can avoid open-coding the loop construct which counts firmware child nodes with a specific name by using the newly added device_get_named_child_node_count(). The gianfar driver has such open-coded loop. Replace it with the device_get_child_node_count_named(). Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/3a33988fc042588cb00a0bfc5ad64e749cb0eb1f.1750248902.git.mazziesaccount@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19Merge branch 'net-fec-general-vlan-cleanups'Jakub Kicinski
Marc Kleine-Budde says: ==================== net: fec: general + VLAN cleanups This series first cleans up the fec driver a bit (typos, obsolete comments, add missing header files, rename struct, replace magic number by defines). The last 5 patches clean up the fec_enet_rx_queue() function, including VLAN handling. v3: https://patch.msgid.link/20250617-fec-cleanups-v3-0-a57bfb38993f@pengutronix.de v2: https://patch.msgid.link/20250612-fec-cleanups-v2-0-ae7c36df185e@pengutronix.de v1: https://patch.msgid.link/20241016-fec-cleanups-v1-0-de783bd15e6a@pengutronix.de ==================== Link: https://patch.msgid.link/20250618-fec-cleanups-v4-0-c16f9a1af124@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: fec: fec_enet_rx_queue(): factor out VLAN handling into separate ↵Marc Kleine-Budde
function fec_enet_rx_vlan() In order to clean up of the VLAN handling, factor out the VLAN handling into separate function fec_enet_rx_vlan(). Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://patch.msgid.link/20250618-fec-cleanups-v4-11-c16f9a1af124@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 06:33:49 +0000