| Age | Commit message (Collapse) | Author |
|---|
|
If we break out of the loop because an extent buffer doesn't have the bit
EXTENT_BUFFER_TREE_REF set, we end up unlocking the xarray twice, once
before we tested for the bit and break out of the loop, and once again
after the loop.
Fix this by testing the bit and exiting before unlocking the xarray.
The time spent testing the bit is negligible and it's not worth trying
to do that outside the critical section delimited by the xarray lock due
to the code complexity required to avoid it (like using a local boolean
variable to track whether the xarray is locked or not). The xarray unlock
only needs to be done before calling release_extent_buffer(), as that
needs to lock the xarray (through xa_cmpxchg_irq()) and does a more
significant amount of work.
Fixes: 19d7f65f032f ("btrfs: convert the buffer_radix to an xarray")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/linux-btrfs/aDRNDU0GM1_D4Xnw@stanley.mountain/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Each superblock contains a copy of the device item for that device. In a
transaction which drops a chunk but doesn't create any new ones, we were
correctly updating the device item in the chunk tree but not copying
over the new bytes_used value to the superblock.
This can be seen by doing the following:
# dd if=/dev/zero of=test bs=4096 count=2621440
# mkfs.btrfs test
# mount test /root/temp
# cd /root/temp
# for i in {00..10}; do dd if=/dev/zero of=$i bs=4096 count=32768; done
# sync
# rm *
# sync
# btrfs balance start -dusage=0 .
# sync
# cd
# umount /root/temp
# btrfs check test
For btrfs-check to detect this, you will also need my patch at
https://github.com/kdave/btrfs-progs/pull/991.
Change btrfs_remove_dev_extents() so that it adds the devices to the
fs_info->post_commit_list if they're not there already. This causes
btrfs_commit_device_sizes() to be called, which updates the bytes_used
value in the superblock.
Fixes: bbbf7243d62d ("btrfs: combine device update operations during transaction commit")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have a race between a rename and directory inode logging that if it
happens and we crash/power fail before the rename completes, the next time
the filesystem is mounted, the log replay code will end up deleting the
file that was being renamed.
This is best explained following a step by step analysis of an interleaving
of steps that lead into this situation.
Consider the initial conditions:
1) We are at transaction N;
2) We have directories A and B created in a past transaction (< N);
3) We have inode X corresponding to a file that has 2 hardlinks, one in
directory A and the other in directory B, so we'll name them as
"A/foo_link1" and "B/foo_link2". Both hard links were persisted in a
past transaction (< N);
4) We have inode Y corresponding to a file that as a single hard link and
is located in directory A, we'll name it as "A/bar". This file was also
persisted in a past transaction (< N).
The steps leading to a file loss are the following and for all of them we
are under transaction N:
1) Link "A/foo_link1" is removed, so inode's X last_unlink_trans field
is updated to N, through btrfs_unlink() -> btrfs_record_unlink_dir();
2) Task A starts a rename for inode Y, with the goal of renaming from
"A/bar" to "A/baz", so we enter btrfs_rename();
3) Task A inserts the new BTRFS_INODE_REF_KEY for inode Y by calling
btrfs_insert_inode_ref();
4) Because the rename happens in the same directory, we don't set the
last_unlink_trans field of directoty A's inode to the current
transaction id, that is, we don't cal btrfs_record_unlink_dir();
5) Task A then removes the entries from directory A (BTRFS_DIR_ITEM_KEY
and BTRFS_DIR_INDEX_KEY items) when calling __btrfs_unlink_inode()
(actually the dir index item is added as a delayed item, but the
effect is the same);
6) Now before task A adds the new entry "A/baz" to directory A by
calling btrfs_add_link(), another task, task B is logging inode X;
7) Task B starts a fsync of inode X and after logging inode X, at
btrfs_log_inode_parent() it calls btrfs_log_all_parents(), since
inode X has a last_unlink_trans value of N, set at in step 1;
8) At btrfs_log_all_parents() we search for all parent directories of
inode X using the commit root, so we find directories A and B and log
them. Bu when logging direct A, we don't have a dir index item for
inode Y anymore, neither the old name "A/bar" nor for the new name
"A/baz" since the rename has deleted the old name but has not yet
inserted the new name - task A hasn't called yet btrfs_add_link() to
do that.
Note that logging directory A doesn't fallback to a transaction
commit because its last_unlink_trans has a lower value than the
current transaction's id (see step 4);
9) Task B finishes logging directories A and B and gets back to
btrfs_sync_file() where it calls btrfs_sync_log() to persist the log
tree;
10) Task B successfully persisted the log tree, btrfs_sync_log() completed
with success, and a power failure happened.
We have a log tree without any directory entry for inode Y, so the
log replay code deletes the entry for inode Y, name "A/bar", from the
subvolume tree since it doesn't exist in the log tree and the log
tree is authorative for its index (we logged a BTRFS_DIR_LOG_INDEX_KEY
item that covers the index range for the dentry that corresponds to
"A/bar").
Since there's no other hard link for inode Y and the log replay code
deletes the name "A/bar", the file is lost.
The issue wouldn't happen if task B synced the log only after task A
called btrfs_log_new_name(), which would update the log with the new name
for inode Y ("A/bar").
Fix this by pinning the log root during renames before removing the old
directory entry, and unpinning after btrfs_log_new_name() is called.
Fixes: 259c4b96d78d ("btrfs: stop doing unnecessary log updates during a rename")
CC: stable@vger.kernel.org # 5.18+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a "scrub: " prefix to all messages logged by scrub so that it's
easy to filter them from dmesg for analysis.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a warning for leaked delayed_nodes when putting a root. We currently
do this for inodes, but not delayed_nodes.
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
[ Remove the changelog from the commit message. ]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If the delayed_root is not empty we are increasing the number of
references to a delayed_node without decreasing it, causing a leak. Fix
by decrementing the delayed_node reference count.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
[ Remove the changelog from the commit message. ]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
To help debugging include the root number in the error message, and since
this is a critical error that implies a metadata inconsistency and results
in a transaction abort change the log message level from "info" to
"critical", which is a much better fit.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Erni Sri Satya Vennela says:
====================
Support bandwidth clamping in mana using net shapers
This patchset introduces hardware-backed bandwidth rate limiting
for MANA NICs via the net_shaper_ops interface, enabling efficient and
fine-grained traffic shaping directly on the device.
Previously, MANA lacked a mechanism for user-configurable bandwidth
control. With this addition, users can now configure shaping parameters,
allowing better traffic management and performance isolation.
The implementation includes the net_shaper_ops callbacks in the MANA
driver and supports one shaper per vport. Add shaping support via
mana_set_bw_clamp(), allowing the configuration of bandwidth rates
in 100 Mbps increments (minimum 100 Mbps). The driver validates input
and rejects unsupported values. On failure, it restores the previous
configuration which is queried using mana_query_link_cfg() or
retains the current state.
To prevent potential deadlocks introduced by net_shaper_ops, switch to
_locked variants of NAPI APIs when netdevops_lock is held during
VF setup and teardown.
Also, Add support for ethtool get_link_ksettings to report the maximum
link speed supported by the SKU in mbps.
These APIs when invoked on hardware that are older or that do
not support these APIs, the speed would be reported as UNKNOWN and
the net-shaper calls to set speed would fail.
====================
Link: https://patch.msgid.link/1750144656-2021-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If any of the HWC commands are not recognized by the
underlying hardware, the hardware returns the response
header status of -1. Log the information using
netdev_info_once to avoid multiple error logs in dmesg.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-5-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Allow mana ethtool get_link_ksettings operation to report
the maximum speed supported by the SKU in mbps.
The driver retrieves this information by issuing a
HWC command to the hardware via mana_query_link_cfg(),
which retrieves the SKU's maximum supported speed.
These APIs when invoked on hardware that are older/do
not support these APIs, the speed would be reported as UNKNOWN.
Before:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
After:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 16000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-4-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce support for net_shaper_ops in the MANA driver,
enabling configuration of rate limiting on the MANA NIC.
To apply rate limiting, the driver issues a HWC command via
mana_set_bw_clamp() and updates the corresponding shaper object
in the net_shaper cache. If an error occurs during this process,
the driver restores the previous speed by querying the current link
configuration using mana_query_link_cfg().
The minimum supported bandwidth is 100 Mbps, and only values that are
exact multiples of 100 Mbps are allowed. Any other values are rejected.
To remove a shaper, the driver resets the bandwidth to the maximum
supported by the SKU using mana_set_bw_clamp() and clears the
associated cache entry. If an error occurs during this process,
the shaper details are retained.
On the hardware that does not support these APIs, the net-shaper
calls to set speed would fail.
Set the speed:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do set --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev", "id":'$ID' },
"bw-max": 200000000 }'
Get the shaper details:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do get --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev", "id":'$ID' }}'
> {'bw-max': 200000000,
> 'handle': {'scope': 'netdev'},
> 'ifindex': $IFINDEX,
> 'metric': 'bps'}
Delete the shaper object:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do delete --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev","id":'$ID' }}'
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When net_shaper_ops are enabled for MANA, netdev_ops_lock
becomes active.
MANA VF setup/teardown by netvsc follows this call chain:
netvsc_vf_setup()
dev_change_flags()
...
__dev_open() OR __dev_close()
dev_change_flags() holds the netdev mutex via netdev_lock_ops.
Meanwhile, mana_create_txq() and mana_create_rxq() in mana_open()
path call NAPI APIs (netif_napi_add_tx(), netif_napi_add_weight(),
napi_enable()), which also try to acquire the same lock, risking
deadlock.
Similarly in the teardown path (mana_close()), netif_napi_disable()
and netif_napi_del(), contend for the same lock.
Switch to the _locked variants of these APIs to avoid deadlocks
when the netdev_ops_lock is held.
Fixes: d4c22ec680c8 ("net: hold netdev instance lock during ndo_open/ndo_stop")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-2-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The VHE hyp code has recently gained a few ISBs. Simplify this to one
unconditional ISB in __kvm_vcpu_run_vhe(), and remove the unnecessary
ISB from the kvm_call_hyp_ret() macro.
While kvm_call_hyp_ret() is also used to invoke
__vgic_v3_get_gic_config(), but no ISB is necessary in that case either.
For the moment, an ISB is left in kvm_call_hyp(), as there are many more
users, and removing the ISB would require a more thorough audit.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-8-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We no longer use cpacr_clear_set().
Remove cpacr_clear_set() and its helper functions.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-7-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The hyp code FPSIMD/SVE/SME trap handling logic has some rather messy
open-coded manipulation of CPTR/CPACR. This is benign for non-nested
guests, but broken for nested guests, as the guest hypervisor's CPTR
configuration is not taken into account.
Consider the case where L0 provides FPSIMD+SVE to an L1 guest
hypervisor, and the L1 guest hypervisor only provides FPSIMD to an L2
guest (with L1 configuring CPTR/CPACR to trap SVE usage from L2). If the
L2 guest triggers an FPSIMD trap to the L0 hypervisor,
kvm_hyp_handle_fpsimd() will see that the vCPU supports FPSIMD+SVE, and
will configure CPTR/CPACR to NOT trap FPSIMD+SVE before returning to the
L2 guest. Consequently the L2 guest would be able to manipulate SVE
state even though the L1 hypervisor had configured CPTR/CPACR to forbid
this.
Clean this up, and fix the nested virt issue by always using
__deactivate_cptr_traps() and __activate_cptr_traps() to manage the CPTR
traps. This removes the need for the ad-hoc fixup in
kvm_hyp_save_fpsimd_host(), and ensures that any guest hypervisor
configuration of CPTR/CPACR is taken into account.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-6-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
There's no need for fpsimd_sve_sync() to write to CPTR/CPACR. All
relevant traps are always disabled earlier within __kvm_vcpu_run(), when
__deactivate_cptr_traps() configures CPTR/CPACR.
With irrelevant details elided, the flow is:
handle___kvm_vcpu_run(...)
{
flush_hyp_vcpu(...) {
fpsimd_sve_flush(...);
}
__kvm_vcpu_run(...) {
__activate_traps(...) {
__activate_cptr_traps(...);
}
do {
__guest_enter(...);
} while (...);
__deactivate_traps(....) {
__deactivate_cptr_traps(...);
}
}
sync_hyp_vcpu(...) {
fpsimd_sve_sync(...);
}
}
Remove the unnecessary write to CPTR/CPACR. An ISB is still necessary,
so a comment is added to describe this requirement.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-5-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The NVHE/HVHE and VHE modes have separate implementations of
__activate_cptr_traps() and __deactivate_cptr_traps() in their
respective switch.c files. There's some duplication of logic, and it's
not currently possible to reuse this logic elsewhere.
Move the logic into the common switch.h header so that it can be reused,
and de-duplicate the common logic.
This rework changes the way SVE traps are deactivated in VHE mode,
aligning it with NVHE/HVHE modes:
* Before this patch, VHE's __deactivate_cptr_traps() would
unconditionally enable SVE for host EL2 (but not EL0), regardless of
whether the ARM64_SVE cpucap was set.
* After this patch, VHE's __deactivate_cptr_traps() will take the
ARM64_SVE cpucap into account. When ARM64_SVE is not set, SVE will be
trapped from EL2 and below.
The old and new behaviour are both benign:
* When ARM64_SVE is not set, the host will not touch SVE state, and will
not reconfigure SVE traps. Host EL0 access to SVE will be trapped as
expected.
* When ARM64_SVE is set, the host will configure EL0 SVE traps before
returning to EL0 as part of reloading the EL0 FPSIMD/SVE/SME state.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-4-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Currently there is no ISB between __deactivate_cptr_traps() disabling
traps that affect EL2 and fpsimd_lazy_switch_to_host() manipulating
registers potentially affected by CPTR traps.
When NV is not in use, this is safe because the relevant registers are
only accessed when guest_owns_fp_regs() && vcpu_has_sve(vcpu), and this
also implies that SVE traps affecting EL2 have been deactivated prior to
__guest_entry().
When NV is in use, a guest hypervisor may have configured SVE traps for
a nested context, and so it is necessary to have an ISB between
__deactivate_cptr_traps() and fpsimd_lazy_switch_to_host().
Due to the current lack of an ISB, when a guest hypervisor enables SVE
traps in CPTR, the host can take an unexpected SVE trap from within
fpsimd_lazy_switch_to_host(), e.g.
| Unhandled 64-bit el1h sync exception on CPU1, ESR 0x0000000066000000 -- SVE
| CPU: 1 UID: 0 PID: 164 Comm: kvm-vcpu-0 Not tainted 6.15.0-rc4-00138-ga05e0f012c05 #3 PREEMPT
| Hardware name: FVP Base RevC (DT)
| pstate: 604023c9 (nZCv DAIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __kvm_vcpu_run+0x6f4/0x844
| lr : __kvm_vcpu_run+0x150/0x844
| sp : ffff800083903a60
| x29: ffff800083903a90 x28: ffff000801f4a300 x27: 0000000000000000
| x26: 0000000000000000 x25: ffff000801f90000 x24: ffff000801f900f0
| x23: ffff800081ff7720 x22: 0002433c807d623f x21: ffff000801f90000
| x20: ffff00087f730730 x19: 0000000000000000 x18: 0000000000000000
| x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
| x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
| x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
| x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff000801f90d70
| x5 : 0000000000001000 x4 : ffff8007fd739000 x3 : ffff000801f90000
| x2 : 0000000000000000 x1 : 00000000000003cc x0 : ffff800082f9d000
| Kernel panic - not syncing: Unhandled exception
| CPU: 1 UID: 0 PID: 164 Comm: kvm-vcpu-0 Not tainted 6.15.0-rc4-00138-ga05e0f012c05 #3 PREEMPT
| Hardware name: FVP Base RevC (DT)
| Call trace:
| show_stack+0x18/0x24 (C)
| dump_stack_lvl+0x60/0x80
| dump_stack+0x18/0x24
| panic+0x168/0x360
| __panic_unhandled+0x68/0x74
| el1h_64_irq_handler+0x0/0x24
| el1h_64_sync+0x6c/0x70
| __kvm_vcpu_run+0x6f4/0x844 (P)
| kvm_arm_vcpu_enter_exit+0x64/0xa0
| kvm_arch_vcpu_ioctl_run+0x21c/0x870
| kvm_vcpu_ioctl+0x1a8/0x9d0
| __arm64_sys_ioctl+0xb4/0xf4
| invoke_syscall+0x48/0x104
| el0_svc_common.constprop.0+0x40/0xe0
| do_el0_svc+0x1c/0x28
| el0_svc+0x30/0xcc
| el0t_64_sync_handler+0x10c/0x138
| el0t_64_sync+0x198/0x19c
| SMP: stopping secondary CPUs
| Kernel Offset: disabled
| CPU features: 0x0000,000002c0,02df4fb9,97ee773f
| Memory Limit: none
| ---[ end Kernel panic - not syncing: Unhandled exception ]---
Fix this by adding an ISB between __deactivate_traps() and
fpsimd_lazy_switch_to_host().
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-3-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When KVM runs in non-protected VHE mode, there's no context
synchronization event between __debug_switch_to_host() restoring the
host debug registers and __kvm_vcpu_run() unmasking debug exceptions.
Due to this, it's theoretically possible for the host to take an
unexpected debug exception due to the stale guest configuration.
This cannot happen in NVHE/HVHE mode as debug exceptions are masked in
the hyp code, and the exception return to the host will provide the
necessary context synchronization before debug exceptions can be taken.
For now, avoid the problem by adding an ISB after VHE hyp code restores
the host debug registers.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250617133718.4014181-2-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The semantics are that caller of fbnic_mbx_map_msg() retains
the ownership of the message on error. All existing callers
dutifully free the page.
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250616195510.225819-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since commit 3e6a0243ff00 ("gre: Fix again IPv6 link-local address
generation."), addrconf_gre_config() has stopped handling IP6GRE
devices specially and just calls the regular addrconf_addr_gen()
function to create their link-local IPv6 addresses.
We can thus avoid using addrconf_gre_config() for IP6GRE devices and
use the normal IPv6 initialisation path instead (that is, jump directly
to addrconf_dev_config() in addrconf_init_auto_addrs()).
See commit 3e6a0243ff00 ("gre: Fix again IPv6 link-local address
generation.") for a deeper explanation on how and why GRE devices
started handling their IPv6 link-local address generation specially,
why it was a problem, and why this is not even necessary in most cases
(especially for GRE over IPv6).
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/a9144be9c7ec3cf09f25becae5e8fdf141fde9f6.1750075076.git.gnault@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Static analysis shows that pointer "my_ets" cannot be NULL because it
points to the object "struct ieee_ets".
Remove the extra NULL check. It is meaningless and harms the readability
of the code.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250616045034.26000-1-a.vatoropin@crpt.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Close the GIC FD to free the reference it holds to the VM so that we can
correctly clean up the VM. This also gets rid of the
"KVM: debugfs: duplicate directory 395722-4"
warning when running arch_timer_edge_cases.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250608095402.1131-1-yuzenghui@huawei.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Explicitly treat type differences as GSI routing changes, as comparing MSI
data between two entries could get a false negative, e.g. if userspace
changed the type but left the type-specific data as-
Note, the same bug was fixed in x86 by commit bcda70c56f3e ("KVM: x86:
Explicitly treat routing entry type changes as changes").
Fixes: 4bf3693d36af ("KVM: arm64: Unmap vLPIs affected by changes to GSI routing information")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250611224604.313496-3-seanjc@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Wei-Lin reports that the tracking of shadow list registers is
majorly broken when resync'ing the L2 state after a run, as
we confuse the guest's LR index with the host's, potentially
losing the interrupt state.
While this could be fixed by adding yet another side index to
track it (Wei-Lin's fix), it may be better to refactor this
code to avoid having a side index altogether, limiting the
risk to introduce this class of bugs.
A key observation is that the shadow index is always the number
of bits in the lr_map bitmap. With that, the parallel indexing
scheme can be completely dropped.
While doing this, introduce a couple of helpers that abstract
the index conversion and some of the LR repainting, making the
whole exercise much simpler.
Reported-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Reviewed-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250614145721.2504524-1-r09922117@csie.ntu.edu.tw
Link: https://lore.kernel.org/r/86qzzkc5xa.wl-maz@kernel.org
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.16-2025-06-18:
amdgpu:
- DP tunneling fix
- LTTPR fix
- DSC fix
- DML2.x ABGR16161616 fix
- RMCM fix
- Backlight fixes
- GFX11 kicker support
- SDMA reset fixes
- VCN 5.0.1 fix
- Reset fix
- Misc small fixes
amdkfd:
- SDMA reset fix
- Fix race in GWS scheduling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250618203115.1533451-1-alexander.deucher@amd.com
|
|
Crafted encoded extents could record out-of-range `lstart`, which should
not happen in normal cases.
It caused an iomap_iter_done() complaint [1] reported by syzbot.
[1] https://lore.kernel.org/r/684cb499.a00a0220.c6bd7.0010.GAE@google.com
Fixes: 1d191b4ca51d ("erofs: implement encoded extent metadata")
Reported-and-tested-by: syzbot+d8f000c609f05f52d9b5@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d8f000c609f05f52d9b5
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250619032839.2642193-1-hsiangkao@linux.alibaba.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix MIPI vtotal programming off by one on Broxton
- Fix PMU code for GCOV and AutoFDO enabled build
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/aFJfykDpUwtmpilE@jlahtine-mobl
|
|
Kory Maincent says:
====================
Add support for PSE budget evaluation strategy
This series brings support for budget evaluation strategy in the PSE
subsystem. PSE controllers can set priorities to decide which ports should
be turned off in case of special events like over-current.
This patch series adds support for two budget evaluation strategy.
1. Static Method:
This method involves distributing power based on PD classification.
It’s straightforward and stable, the PSE core keeping track of the
budget and subtracting the power requested by each PD’s class.
Advantages: Every PD gets its promised power at any time, which
guarantees reliability.
Disadvantages: PD classification steps are large, meaning devices
request much more power than they actually need. As a result, the power
supply may only operate at, say, 50% capacity, which is inefficient and
wastes money.
2. Dynamic Method:
To address the inefficiencies of the static method, vendors like
Microchip have introduced dynamic power budgeting, as seen in the
PD692x0 firmware. This method monitors the current consumption per port
and subtracts it from the available power budget. When the budget is
exceeded, lower-priority ports are shut down.
Advantages: This method optimizes resource utilization, saving costs.
Disadvantages: Low-priority devices may experience instability.
The UAPI allows adding support for software port priority mode managed from
userspace later if needed.
Patches 1-2: Add support for interrupt event report in PSE core, ethtool
and ethtool specs.
Patch 3: Adds support for interrupt and event report in TPS23881 driver.
Patches 4,5: Add support for PSE power domain in PSE core and ethtool.
Patches 6-8: Add support for budget evaluation strategy in PSE core,
ethtool and ethtool specs.
Patches 9-11: Add support for port priority and power supplies in PD692x0
drivers.
Patches 12,13: Add support for port priority in TPS23881 drivers.
====================
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-0-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an interrupt property to the device tree bindings for the TI TPS23881
PSE controller. The interrupt is primarily used to detect classification
and disconnection events, which are essential for managing the PSE
controller in compliance with the PoE standard.
Interrupt support is essential for the proper functioning of the TPS23881
controller. Without it, after a power-on (PWON), the controller will
no longer perform detection and classification. This could lead to
potential hazards, such as connecting a non-PoE device after a PoE device,
which might result in magic smoke.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-13-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch enhances PSE callbacks by introducing support for the static
port priority feature. It extends interrupt management to handle and report
detection, classification, and disconnection events. Additionally, it
introduces the pi_get_pw_req() callback, which provides information about
the power requested by the Powered Devices.
Interrupt support is essential for the proper functioning of the TPS23881
controller. Without it, after a power-on (PWON), the controller will
no longer perform detection and classification. This could lead to
potential hazards, such as connecting a non-PoE device after a PoE device,
which might result in magic smoke.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-12-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adds the regulator supply parameter of the managers.
Update also the example as the regulator supply of the PSE PIs
should be the managers itself and not an external regulator.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-11-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for managing the VDD and VDDA power supplies for the PD692x0
PSE controller, as well as the VAUX5 and VAUX3P3 power supplies for the
PD6920x PSE managers.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-10-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch extends the PSE callbacks by adding support for the newly
introduced pi_set_prio() callback, enabling the configuration of PSE PI
priorities. The current port priority is now also included in the status
information returned to users.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-9-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch expands the status information provided by ethtool for PSE c33
with current port priority and max port priority. It also adds a call to
pse_ethtool_set_prio() to configure the PSE port priority.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-8-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch introduces the ability to configure the PSE PI budget evaluation
strategies. Budget evaluation strategies is utilized by PSE controllers to
determine which ports to turn off first in scenarios such as power budget
exceedance.
The pis_prio_max value is used to define the maximum priority level
supported by the controller. Both the current priority and the maximum
priority are exposed to the user through the pse_ethtool_get_status call.
This patch add support for two mode of budget evaluation strategies.
1. Static Method:
This method involves distributing power based on PD classification.
It’s straightforward and stable, the PSE core keeping track of the
budget and subtracting the power requested by each PD’s class.
Advantages: Every PD gets its promised power at any time, which
guarantees reliability.
Disadvantages: PD classification steps are large, meaning devices
request much more power than they actually need. As a result, the power
supply may only operate at, say, 50% capacity, which is inefficient and
wastes money.
Priority max value is matching the number of PSE PIs within the PSE.
2. Dynamic Method:
To address the inefficiencies of the static method, vendors like
Microchip have introduced dynamic power budgeting, as seen in the
PD692x0 firmware. This method monitors the current consumption per port
and subtracts it from the available power budget. When the budget is
exceeded, lower-priority ports are shut down.
Advantages: This method optimizes resource utilization, saving costs.
Disadvantages: Low-priority devices may experience instability.
Priority max value is set by the PSE controller driver.
For now, budget evaluation methods are not configurable and cannot be
mixed. They are hardcoded in the PSE driver itself, as no current PSE
controller supports both methods.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-7-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor code by introducing a helper function to retrieve the hardware
enabled state of the PI, avoiding redundant implementations in the
future.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-6-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Report the index of the newly introduced PSE power domain to the user,
enabling improved management of the power budget for PSE devices.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-5-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce PSE power domain support as groundwork for upcoming port
priority features. Multiple PSE PIs can now be grouped under a single
PSE power domain, enabling future enhancements like defining available
power budgets, port priority modes, and disconnection policies. This
setup will allow the system to assess whether activating a port would
exceed the available power budget, preventing over-budget states
proactively.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-4-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for PSE event reporting through interrupts. Set up the newly
introduced devm_pse_irq_helper helper to register the interrupt. Events are
reported for over-current and over-temperature conditions.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-3-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for devm_pse_irq_helper() to register PSE interrupts and report
events such as over-current or over-temperature conditions. This follows a
similar approach to the regulator API but also sends notifications using a
dedicated PSE ethtool netlink socket.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-2-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for reporting PSE events via ethtool notifications,
introduce an attached_phydev field in the pse_control structure.
This field stores the phy_device associated with the PSE PI,
ensuring that notifications are sent to the correct network
interface.
The attached_phydev pointer is directly tied to the PHY lifecycle. It
is set when the PHY is registered and cleared when the PHY is removed.
There is no need to use a refcount, as doing so could interfere with
the PHY removal process.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-1-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
David Arinzon says:
====================
PHC support in ENA driver
This patchset adds the support for PHC (PTP Hardware Clock)
in the ENA driver. The documentation part of the patchset
includes additional information, including statistics,
utilization and invocation examples through the testptp
utility.
====================
Link: https://patch.msgid.link/20250617110545.5659-1-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide the relevant information and guidelines
about the feature support in the ENA driver.
Signed-off-by: Amit Bernstein <amitbern@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-10-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an entry named `phc_stats` to view the PHC statistics.
If PHC is enabled, the stats are printed, as below:
phc_cnt: 0
phc_exp: 0
phc_skp: 0
phc_err_dv: 0
phc_err_ts: 0
If PHC is disabled, no statistics will be displayed.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-9-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adding the base directory of debugfs to the driver.
In order for the folder to be unique per driver instantiation,
the chosen name is the device name.
This commit contains the initialization and the
base folder.
The creation of the base folder may fail, but is considered
non-fatal.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-8-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the capability to set parameters through the devlink framework.
The parameter used for controlling PHC (enable/disable) details
are as follows:
- Name: enable_phc
- Type: Boolean (true - enable/false - disable)
- Mode: DEVLINK_PARAM_CMODE_DRIVERINIT
- Effect: Changes take place during driver initialization,
any changes require a devlink reload to take effect.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-7-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new device generic parameter to enable/disable the
PHC (PTP Hardware Clock) functionality in the device associated
with the devlink instance.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250617110545.5659-6-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the basic functionality to support devlink port
for devlink model completeness purposes.
Current support is for registration/un-registration.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-5-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adding basic devlink capability support of reloading the driver.
This capability is required to support driver init type
devlink params (DEVLINK_PARAM_CMODE_DRIVERINIT). Such params
require reloading of the driver (destroy/restore sequence).
The reloading is done by the devlink framework using the
hooks provided by the driver.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-4-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
