| Age | Commit message (Collapse) | Author |
|---|
|
with --debug, see:
cpu0: MSR_CC6_DEMOTION_POLICY_CONFIG: 0x00000000 (DISable-CC6-Demotion)
cpu0: MSR_MC6_DEMOTION_POLICY_CONFIG: 0x00000000 (DISable-MC6-Demotion)
Note that the hardware default is to enable demotion,
and Linux started clearing these registers in 3.17.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
and so --debug fails with:
turbostat: msr 1 offset 0x1aa read failed: Input/output error
It seems that baytrail, and airmont do not have this MSR.
It is included in subsequent Goldmont Atom.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add the "--show" and "--hide" cmdline parameters.
By default, turbostat shows all columns.
turbostat --hide counter_list
will continue showing all columns, except for those listed.
turbostat --show counter_list
will show _only_ the listed columns
These features work for built-in counters, and have no effect
on columns added with the --add parameter.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
When --add was used more than once, overflowed buffers
caused some counters to be stored on top of others,
corrupting the results. Simplify the code by simply
reserving space for up to 16 added counters per each
cpu, core, package.
Per-cpu added counters were being printed only per-core.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma DMA mapping updates from Doug Ledford:
"Drop IB DMA mapping code and use core DMA code instead.
Bart Van Assche noted that the ib DMA mapping code was significantly
similar enough to the core DMA mapping code that with a few changes it
was possible to remove the IB DMA mapping code entirely and switch the
RDMA stack to use the core DMA mapping code.
This resulted in a nice set of cleanups, but touched the entire tree
and has been kept separate for that reason."
* tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it
IB/core: Remove ib_device.dma_device
nvme-rdma: Switch from dma_device to dev.parent
RDS: net: Switch from dma_device to dev.parent
IB/srpt: Modify a debug statement
IB/srp: Switch from dma_device to dev.parent
IB/iser: Switch from dma_device to dev.parent
IB/IPoIB: Switch from dma_device to dev.parent
IB/rxe: Switch from dma_device to dev.parent
IB/vmw_pvrdma: Switch from dma_device to dev.parent
IB/usnic: Switch from dma_device to dev.parent
IB/qib: Switch from dma_device to dev.parent
IB/qedr: Switch from dma_device to dev.parent
IB/ocrdma: Switch from dma_device to dev.parent
IB/nes: Remove a superfluous assignment statement
IB/mthca: Switch from dma_device to dev.parent
IB/mlx5: Switch from dma_device to dev.parent
IB/mlx4: Switch from dma_device to dev.parent
IB/i40iw: Remove a superfluous assignment statement
IB/hns: Switch from dma_device to dev.parent
...
|
|
The functions flush_user_dcache_range() and flush_user_icache_range()
are only used by the parisc signal handling code. This code only needs
to flush a couple of lines, so the threshold check is unnecessary
overhead.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
We want to do a pr_cont() here and not a pr_warn().
Fixes: b391667eb45a ("parisc: Report trap type as human readable string")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fix error paths and return -ENOMEM instead of '1'.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Define access_ok() as macro instead of static function. This fixes build
warnings in code where the second parameter is given as unsigned long.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This patch removes coding style errors in the eisa driver.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
- fix for font color when console is switched to another fb driver
- deferred probing fixes for simplefb driver
- preparations to add support of an optional GPIO to enable panel for
ARM CLCD driver
- some improvements for ssd1307fb driver
- cleanups for OMAP fbdev LCD drivers
- misc fixes/cleanups for various fb drivers
* tag 'fbdev-v4.11' of git://github.com/bzolnier/linux: (30 commits)
video: fbdev: fsl-diu-fb: fix spelling mistake "palette"
fbdev: ssd1307fb: include linux/gpio/consumer.h
video: fbdev: fsl-diu-fb: remove impossible condition
video: fbdev: amifb: remove impossible condition
fbdev/ssd1307fb: clear screen in probe
fbdev/ssd1307fb: add support to enable VBAT
fbdev: ssd1307fb: Make reset gpio devicetree property optional
fbdev: ssd1307fb: Remove reset-active-low from the DT binding document
fbdev: ssd1307fb: Start to use gpiod API for reset gpio
video: fbdev: sh_mobile_lcdcfb: fix error return code in sh_mobile_lcdc_probe()
video: fbdev: offb: switch to using for_each_node_by_type
video/console: use setup_timer and mod_timer instead of init_timer
fbdev: omap/lcd: Make callbacks optional
fbdev: omap/lcd: Staticize non-exported lcd_panel structs
fbdev: omap/lcd: Remove no-op driver callbacks
video/mbx: use simple_open()
video: fbdev: stifb: handle NULL return value from ioremap_nocache
video: fbdev: pmagb-b-fb: Remove bad `__init' annotation
video: fbdev: pmag-ba-fb: Remove bad `__init' annotation
video: ARM CLCD: use panel device node for getting backlight and mode
...
|
|
These are the current source files that should not have
executable attributes set.
[ Normally this would be sent through Andrew Morton's tree
but his quilt tools don't like permission only patches. ]
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge more updates from Andrew Morton:
- almost all of the rest of MM
- misc bits
- KASAN updates
- procfs
- lib/ updates
- checkpatch updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (124 commits)
checkpatch: remove false unbalanced braces warning
checkpatch: notice unbalanced else braces in a patch
checkpatch: add another old address for the FSF
checkpatch: update $logFunctions
checkpatch: warn on logging continuations
checkpatch: warn on embedded function names
lib/lz4: remove back-compat wrappers
fs/pstore: fs/squashfs: change usage of LZ4 to work with new LZ4 version
crypto: change LZ4 modules to work with new LZ4 module version
lib/decompress_unlz4: change module to work with new LZ4 module version
lib: update LZ4 compressor module
lib/test_sort.c: make it explicitly non-modular
lib: add CONFIG_TEST_SORT to enable self-test of sort()
rbtree: use designated initializers
linux/kernel.h: fix DIV_ROUND_CLOSEST to support negative divisors
lib/find_bit.c: micro-optimise find_next_*_bit
lib: add module support to atomic64 tests
lib: add module support to glob tests
lib: add module support to crc32 tests
kernel/ksysfs.c: add __ro_after_init to bin_attribute structure
...
|
|
mac80211_hwsim initializes a hrtimer with clockid CLOCK_MONOTONIC_RAW.
That's not supported.
Use CLOCK_MONOTNIC instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Reorder error handling labels in order to match the way resources have
been allocated.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into for-next
Linux 4.10
|
|
Fix the following crash, seen in dwc/pci-imx6.
Unable to handle kernel NULL pointer dereference at virtual address 00000070
pgd = c0004000
[00000070] *pgd=00000000
Internal error: Oops: 805 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.10.0-09686-g9e31489 #1
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
task: cb850000 task.stack: cb84e000
PC is at imx6_pcie_probe+0x2f4/0x414
...
While at it, fix the same problem in various drivers instead of waiting for
individual crash reports.
The change in the imx6 driver was tested with qemu. The changes in other
drivers are based on code inspection and have been compile tested only.
Fixes: 442ec4c04d12 ("PCI: dwc: all: Split struct pcie_port into host-only and core structures")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> # designware-plat
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Commit 4dee62b1b9b4 ("netfilter: nf_ct_expect: nf_ct_expect_insert()
returns void") inadvertently changed the successful return value of
nf_ct_expect_related_report() from 0 to 1, which caused openvswitch
conntrack integration fail in FTP test cases.
Fix this by always returning zero on the success code path.
Fixes: 4dee62b1b9b4 ("netfilter: nf_ct_expect: nf_ct_expect_insert() returns void")
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Include <linux/limits.h> like some of uapi/linux/netfilter/xt_*.h
headers do to fix the following linux/netfilter/xt_hashlimit.h
userspace compilation error:
/usr/include/linux/netfilter/xt_hashlimit.h:90:12: error: 'NAME_MAX' undeclared here (not in a function)
char name[NAME_MAX];
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
0-day bot reported some new objtool warnings which were caused by the
new annotate_unreachable() macro:
fs/afs/flock.o: warning: objtool: afs_do_unlk()+0x0: duplicate frame pointer save
fs/afs/flock.o: warning: objtool: afs_do_unlk()+0x0: frame pointer state mismatch
fs/btrfs/delayed-inode.o: warning: objtool: btrfs_delete_delayed_dir_index()+0x0: duplicate frame pointer save
fs/btrfs/delayed-inode.o: warning: objtool: btrfs_delete_delayed_dir_index()+0x0: frame pointer state mismatch
fs/dlm/lock.o: warning: objtool: _grant_lock()+0x0: duplicate frame pointer save
fs/dlm/lock.o: warning: objtool: _grant_lock()+0x0: frame pointer state mismatch
fs/ocfs2/alloc.o: warning: objtool: ocfs2_mv_path()+0x0: duplicate frame pointer save
fs/ocfs2/alloc.o: warning: objtool: ocfs2_mv_path()+0x0: frame pointer state mismatch
It turns out that, for older versions of GCC, if a function has multiple
BUG() incantations, GCC will sometimes merge the corresponding
annotate_unreachable() inline asm statements into a single block. That
has the undesirable effect of removing one of the entries in the
__unreachable section, confusing objtool greatly.
A workaround for this issue is to ensure that each instance of the
inline asm statement uses a different label, so that GCC sees the
statements are unique and leaves them alone. The inline asm ‘%=’ token
could be used for that, but unfortunately older versions of GCC don't
support it. So I implemented a poor man's version of it with the
__LINE__ macro.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends")
Link: http://lkml.kernel.org/r/0c14b00baf9f68d1b0221ddb6c88b925181c8be8.1487997036.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The Kconfig currently controlling compilation of this code is:
drivers/platform/x86/Kconfig:config INTEL_TURBO_MAX_3
drivers/platform/x86/Kconfig: bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
We do uncover some implicit includes during build coverage that
were hidden behind the module.h which pulls in a lot of dependants.
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This is to support Latitude 7480 and many other newer Dell laptops.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
New firmwares include a feature called 5 button array that supports
super key, volume up/down, rotation lock and power button. Support
for this feature is required to fix power button on some recent
systems.
This patch was tested on a Dell Latitude 7480.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Reviewed-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
on kbd brightness change
Make thinkpad_acpi call led_classdev_notify_brightness_hw_changed on the
kbd_led led_classdev registered by thinkpad_acpi when the kbd backlight
brightness is changed through the hotkey.
This will allow userspace to monitor (poll) for brightness changes on
these LEDs caused by the hotkey.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
|
|
Now a days the LED core can take care of executing brightness_set from
a workqueue if it needs to sleep, make use of this and remove a bunch
of DIY code for this.
Since this commit removes the workqueue usage for LEDs, the
led_sysfs_blink_set callback may now also sleep, this is fine.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
|
|
There is no need to set the led_classdev's brightness value from
its set_brightness callback, this is taken care of by the led-core and
thinkpad_acpi really should not be mucking with it.
Note that kbdlight_set_level_and_update() is still used by the old
thinpad_acpi specific sysfs interface for the led, so we cannot
remove it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
|
|
Some LEDs may have their brightness level changed autonomously
(outside of kernel control) by hardware / firmware. This commit
adds support for an optional brightness_hw_changed attribute to
signal such changes to userspace (if a driver can detect them):
What: /sys/class/leds/<led>/brightness_hw_changed
Date: January 2017
KernelVersion: 4.11
Description:
Last hardware set brightness level for this LED. Some LEDs
may be changed autonomously by hardware/firmware. Only LEDs
where this happens and the driver can detect this, will
have this file.
This file supports poll() to detect when the hardware
changes the brightness.
Reading this file will return the last brightness level set
by the hardware, this may be different from the current
brightness.
Drivers which want to support this, simply add LED_BRIGHT_HW_CHANGED to
their flags field and call led_classdev_notify_brightness_hw_changed()
with the hardware set brightness when they detect a hardware / firmware
triggered brightness change.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
|
|
Now that we have informed the firmware that the RF Button driver is
active, laptops such as the Acer TravelMate P238-M will generate
a WMI key event with code 0x86 when the Fn+F3 airplane mode key is
pressed.
Add this keycode to the table so that it is converted to an appropriate
input event.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The same method to activate LM(Launch Manager) can also be used to
activate the RF Button driver with different bit toggled in the same
lm_status. To express that many functions this byte field can achieve,
rename the lm_status to app_status. And also the app_mask is the bit
mask which specifically indicate which bits are going to be changed.
This solves a problem where the AR9565 wifi included in the
Acer Aspire ES1-421 is permanently hard blocked according to the rfkill
GPIO read by ath9k.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Fix indentation problem introduced when this driver was first merged into
the kernel.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Some Asus machines use 0x4/0x5 as their LED on/off values, while others
use 0x0/0x1, as shown in the DSDT excerpts below. Luckily it seems this
behavior is tied to different HIDs, after looking at 44 DSDTs from
different Asus models.
Another small difference is that a few of them call GWBL instead of
OWGS, and SWBL instead of OWGD. That does not seem to make a difference
for asus-wireless, and is additional reasoning to not try to call these
methods directly.
Device (ASHS) | Device (ASHS)
{ | {
Name (_HID, "ATK4002") | Name (_HID, "ATK4001")
Method (HSWC, 1, Serialized) | Method (HSWC, 1, Serialized)
{ | {
If ((Arg0 < 0x02)) | If ((Arg0 < 0x02))
{ | {
OWGD (Arg0) | OWGD (Arg0)
Return (One) | Return (One)
} | }
If ((Arg0 == 0x02)) |
{ | If ((Arg0 == 0x02))
Local0 = OWGS () | {
If (Local0) | Return (OWGS ())
{ | }
Return (0x05) |
} | If ((Arg0 == 0x03))
Else | {
{ | Return (0xFF)
Return (0x04) | }
} |
} | If ((Arg0 == 0x80))
If ((Arg0 == 0x03)) | {
{ | Return (One)
Return (0xFF) | }
} | }
If ((Arg0 == 0x04)) | Method (_STA, 0, NotSerialized)
{ | {
OWGD (Zero) | If ((MSOS () >= OSW8))
Return (One) | {
} | Return (0x0F)
If ((Arg0 == 0x05)) | }
{ | Else
OWGD (One) | {
Return (One) | Return (Zero)
} | }
If ((Arg0 == 0x80)) | }
{ | }
Return (One) |
} |
} |
Method (_STA, 0, NotSerialized) |
{ |
If ((MSOS () >= OSW8)) |
{ |
Return (0x0F) |
} |
Else |
{ |
Return (Zero) |
} |
} |
} |
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
This patch adds the PCI Device id for Power Management Controller on Intel
Apollo Lake platforms.
Intel PMC IPC Driver loads as a platform driver on Apollo Lake platforms
since Intel BIOS hides the PCI Configuration space for 0:13:1 and
re-enumerates it as ACPI device (INT34D2). The correct PCI Device ID should
be added if some platform firmware choses to enumerate the device via PCI
space.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
This patch adds a new API to indicate S0ix residency in usec. It utilizes
the PMC Global Control Registers (GCR) to read deep and shallow
S0ix residency.
PMC MMIO resources:
o Lower 4kB: IPC1 (PMC inter-processor communication) interface
o Upper 4kB: GCR (Global Control Registers)
This enables the power management framework to take corrective actions when
the platform fails to enter S0ix after kernel freeze as part of the suspend
to idle flow. (echo freeze > /sys/power/state).
This is expected to be used with a S0ix failsafe framework such as:
<https://lwn.net/Articles/689505/>
[rajneesh: folded in "fix division in 32-bit case" from Andy Shevchenko]
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Shanth Murthy <shanth.murthy@intel.com>
[andy: fixed kbuild error, removed "total" from variables, fixed macro]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
No need to #include <linux/acpi.h> twice. Remove second occurrence.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
On older Intel MID platforms is using SCU IPC library beneath MSIC
calls.
To make access unified between old and new platforms use SCU IPC library
directly. It's safe since serialization is done in the library.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The IRQ on Intel Merrifield can be acknowledged in the similar way it's
done for previous MID platforms. Unify acknowledgment via SCU IPC.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Geminilake is another Intel part, so need to add PCI ID for it.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull OpenRISC updates from Stafford Horne:
"Highlights include:
- optimized memset and memcpy routines, ~20% boot time saving
- support for cpu idling
- adding support for l.swa and l.lwa atomic operations (in spec from
2014)
- use atomics to implement: bitops, cmpxchg, futex
- the atomics are in preparation for SMP support"
* tag 'openrisc-for-linus' of git://github.com/openrisc/linux: (25 commits)
openrisc: head: Init r0 to 0 on start
openrisc: Export ioremap symbols used by modules
arch/openrisc/lib/memcpy.c: use correct OR1200 option
openrisc: head: Remove unused strings
openrisc: head: Move init strings to rodata section
openrisc: entry: Fix delay slot detection
openrisc: entry: Whitespace and comment cleanups
scripts/checkstack.pl: Add openrisc support
MAINTAINERS: Add the openrisc official repository
openrisc: Add .gitignore
openrisc: Add optimized memcpy routine
openrisc: Add optimized memset
openrisc: Initial support for the idle state
openrisc: Fix the bitmask for the unit present register
openrisc: remove unnecessary stddef.h include
openrisc: add futex_atomic_* implementations
openrisc: add optimized atomic operations
openrisc: add cmpxchg and xchg implementations
openrisc: add atomic bitops
openrisc: add l.lwa/l.swa emulation
...
|
|
Lines containing "} else {" should not be detected as unbalanced braces.
But the second check can be reduced to ".+else\s*{" and it therefore
never checked if the beginning of a line contains any other character
(like the relevant "}"). This check would also return true for "} else
{" and create warnings like
CHECK: Unbalanced braces around else statement
#391: FILE: ./net/batman-adv/tvlv.c:391:
+ } else {
The check can be changed to check the whole line for the missing "}" to
avoid this false positive.
Fixes: 0d1532456c26 ("checkpatch: notice unbalanced else braces in a patch")
Link: http://lkml.kernel.org/r/20170220121644.12209-1-sven@narfation.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patches that add or modify code like
} else
<foo>
or
else {
<bar>
where one branch appears to have a brace and the other branch does not
have a brace should emit a --strict style message.
Link: http://lkml.kernel.org/r/c6be32747fc725cbc235802991746700a0f54fdc.1486754390.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We still have a lot of old addresses for the FSF in the kernel.
willy@harry:~/kernel/idr$ git grep '675 Mass' |wc -l
1502
willy@harry:~/kernel/idr$ git grep '59 Temple' |wc -l
2825
willy@harry:~/kernel/idr$ git grep '51 Franklin' |wc -l
2020
Let's discourage adding the oldest one too.
Link: http://lkml.kernel.org/r/20170128173052.GA23532@bombadil.infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently checkpatch.pl does not recognize printk_deferred* functions as
log functions and complains about the line length of printk_deferred*
functions. Add printk_deferred* to logFunctions to fix it.
Link: http://lkml.kernel.org/r/1484537124-18083-1-git-send-email-miles.chen@mediatek.com
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
pr_cont(...) and printk(KERN_CONT ...) uses should be discouraged
as their output can be interleaved by multiple logging processes.
Link: http://lkml.kernel.org/r/7100ba00098694ec81471a299583ed068975fd05.1483465888.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Embedded function names are less appropriate to use when refactoring can
cause function renaming. Prefer the use of "%s", __func__ to embedded
function names.
Link: http://lkml.kernel.org/r/ac9631fdbac5af3507c5bfe88ad9064f0ed764ec.1483510416.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove the functions introduced as wrappers for providing backwards
compatibility to the prior LZ4 version. They're not needed anymore
since there's no callers left.
Link: http://lkml.kernel.org/r/1486321748-19085-6-git-send-email-4sschmid@informatik.uni-hamburg.de
Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Rui Salvaterra <rsalvaterra@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Update fs/pstore and fs/squashfs to use the updated functions from the
new LZ4 module.
Link: http://lkml.kernel.org/r/1486321748-19085-5-git-send-email-4sschmid@informatik.uni-hamburg.de
Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Rui Salvaterra <rsalvaterra@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Update the crypto modules using LZ4 compression as well as the test
cases in testmgr.h to work with the new LZ4 module version.
Link: http://lkml.kernel.org/r/1486321748-19085-4-git-send-email-4sschmid@informatik.uni-hamburg.de
Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Rui Salvaterra <rsalvaterra@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Update the unlz4 wrapper to work with the updated LZ4 kernel module
version.
Link: http://lkml.kernel.org/r/1486321748-19085-3-git-send-email-4sschmid@informatik.uni-hamburg.de
Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Rui Salvaterra <rsalvaterra@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Update LZ4 compressor module", v7.
This patchset updates the LZ4 compression module to a version based on
LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast
which provides an "acceleration" parameter as a tradeoff between high
compression ratio and high compression speed.
We want to use LZ4 fast in order to support compression in lustre and
(mostly, based on that) investigate data reduction techniques in behalf
of storage systems.
Also, it will be useful for other users of LZ4 compression, as with LZ4
fast it is possible to enable applications to use fast and/or high
compression depending on the usecase. For instance, ZRAM is offering a
LZ4 backend and could benefit from an updated LZ4 in the kernel.
LZ4 homepage: http://www.lz4.org/
LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3
Benchmark (taken from [1], Core i5-4300U @1.9GHz):
----------------|--------------|----------------|----------
Compressor | Compression | Decompression | Ratio
----------------|--------------|----------------|----------
memcpy | 4200 MB/s | 4200 MB/s | 1.000
LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375
LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607
LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886
LZ4 default | 385 MB/s | 1850 MB/s | 2.101
[1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html
[PATCH 1/5] lib: Update LZ4 compressor module
[PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version
[PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version
[PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version
[PATCH 5/5] lib/lz4: Remove back-compat wrappers
This patch (of 5):
Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel
module is inspired by the previous work by Chanho Min. The updated LZ4
module will not break existing code since the patchset contains
appropriate changes.
API changes:
New method LZ4_compress_fast which differs from the variant available in
kernel by the new acceleration parameter, allowing to trade compression
ratio for more compression speed and vice versa.
LZ4_decompress_fast is the respective decompression method, featuring a
very fast decoder (multiple GB/s per core), able to reach RAM speed in
multi-core systems. The decompressor allows to decompress data
compressed with LZ4 fast as well as the LZ4 HC (high compression)
algorithm.
Also the useful functions LZ4_decompress_safe_partial and
LZ4_compress_destsize were added. The latter reverses the logic by
trying to compress as much data as possible from source to dest while
the former aims to decompress partial blocks of data.
A bunch of streaming functions were also added which allow
compressig/decompressing data in multiple steps (so called "streaming
mode").
The methods lz4_compress and lz4_decompress_unknownoutputsize are now
known as LZ4_compress_default respectivley LZ4_decompress_safe. The old
methods will be removed since there's no callers left in the code.
[arnd@arndb.de: fix KERNEL_LZ4 support]
Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de
[akpm@linux-foundation.org: simplify]
[akpm@linux-foundation.org: fix the simplification]
[4sschmid@informatik.uni-hamburg.de: fix performance regressions]
Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de
[4sschmid@informatik.uni-hamburg.de: v8]
Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de
Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de
Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Rui Salvaterra <rsalvaterra@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
