| Age | Commit message (Collapse) | Author |
|---|
|
Cold reset is more reliable for getting the hardware out of some specific
stuck states.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
mac80211 is lenient with respect to reception of corrupted beacons.
Even if the frame is corrupted as a whole, the available IE elements
are still passed back and accepted, sometimes replacing legitimate
data. It is unknown to what extent this "feature" is made use of,
but it is clear that in some cases, this is detrimental. One such
case is reported in http://crosbug.com/26832 where an AP corrupts
its beacons but not its probe responses.
One approach would be to completely reject frames with invaid data
(for example, if the last tag extends beyond the end of the enclosing
PDU). The enclosed approach is much more conservative: we simply
prevent later IEs from overwriting the state from previous ones.
This approach hopes that there might be some salient data in the
IE stream before the corruption, and seeks to at least prevent that
data from being overwritten. This approach will fix the case above.
Further, we flag element structures that contain data we think might
be corrupted, so that as we fill the mac80211 BSS structure, we try
not to replace data from an un-corrupted probe response with that
of a corrupted beacon, for example.
Short of any statistics gathering in the various forms of AP breakage,
it's not possible to ascertain the side effects of more stringent
discarding of data.
Signed-off-by: Paul Stewart <pstew@chromium.org>
Cc: Sam Leffler <sleffler@chromium.org>
Cc: Eliad Peller <eliad@wizery.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Had the wrong bits and field definitions.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
ath6kl_bmi_[read|write]_hi32() did not have endian support, fix that.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
Found by checkpatch:
drivers/net/wireless/ath/ath6kl/init.c:78: WARNING: line over 80 characters
drivers/net/wireless/ath/ath6kl/init.c:397: WARNING: line over 80 characters
drivers/net/wireless/ath/ath6kl/init.c:407: WARNING: line over 80 characters
drivers/net/wireless/ath/ath6kl/htc.c:189: WARNING: line over 80 characters
drivers/net/wireless/ath/ath6kl/htc.c:704: WARNING: line over 80 characters
drivers/net/wireless/ath/ath6kl/htc.c:2452: WARNING: line over 80 characters
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
Also fixes quite a few checkpatch warnings like this:
ath6kl/hif.h:226: CHECK: spinlock_t definition without comment
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
ath6kl/cfg80211.c:462: CHECK: Alignment should match open parenthesis
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
The error handling in ath6kl_target_config_wlan_params() was just weird,
fix that. This also fixes some of the open parenthesis alignment issues
reported by checkpatch.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
There are few 32 bit reads from the host interest area. Add
ath6kl_bmi_read_hi32() to make it easier to do that. As code is cleaner
this also fixes few checkpatch warnings.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
We have a lot of 32 bit writes to the host interest area and the code
doing that is ugly. Clean that up by adding ath6kl_bmi_write_hi32().
This also fixes few checkpatch warnings.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
Found by checkpatch:
drivers/net/wireless/ath/ath6kl/cfg80211.c:1295: CHECK: multiple assignments should be avoided
drivers/net/wireless/ath/ath6kl/cfg80211.c:3000: CHECK: multiple assignments should be avoided
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
All found by checkpatch:
ath6kl/wmi.c:1036: CHECK: Logical continuations should be on the previous line
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
Fix the issues which checkpatch found and were easy to fix. Especially
callers of ath6kl_bmi_write() are tricky and that needs to be fixed
separately.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
ath6kl/debug.c:739: ERROR: Macros with complex values should be
enclosed in parenthesis
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
reported by checkpatch:
ath6kl/core.h:748: ERROR: "foo * bar" should be "foo *bar"
ath6kl/core.h:751: ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
Also update IDT datasheet locations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org # 3.0+
Acked-by: Jean Delvare <khali@linux-fr.org>
|
|
A global delay parameter has the side effect of being overwritten with 0 if a
single ZL2004 or ZL6105 is instantiated. If other chips supported by the same
driver are in the system, this will result in access errors for those chips.
To solve the problem, keep a per-instance copy of the delay parameter, and do
not change the original parameter.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org # 3.1+
Acked-by: Jean Delvare <khali@linux-fr.org>
|
|
There are up to three POUT alarm attributes, not two, since cap_alarm was added.
Reported-by: Michele Petracca <mi.petracca@gmail.com>
Cc: stable@vger.kernel.org # 3.0+ [3.0 will need backport]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
These are fully compatible with Jedec JC 42.4 as far as I can see.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
|
|
Helps to find format mismatches at compile time
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
|
|
This patch allows you to attach the timeout policy via the
CT target, it adds a new revision of the target to ensure
backward compatibility. Moreover, it also contains the glue
code to stick the timeout object defined via nfnetlink_cttimeout
to the given flow.
Example usage (it requires installing the nfct tool and
libnetfilter_cttimeout):
1) create the timeout policy:
nfct timeout add tcp-policy0 inet tcp \
established 1000 close 10 time_wait 10 last_ack 10
2) attach the timeout policy to the packet:
iptables -I PREROUTING -t raw -p tcp -j CT --timeout tcp-policy0
You have to install the following user-space software:
a) libnetfilter_cttimeout:
git://git.netfilter.org/libnetfilter_cttimeout
b) nfct:
git://git.netfilter.org/nfct
You also have to get iptables with -j CT --timeout support.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch adds the timeout extension, which allows you to attach
specific timeout policies to flows.
This extension is only used by the template conntrack.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch adds the infrastructure to add fine timeout tuning
over nfnetlink. Now you can use the NFNL_SUBSYS_CTNETLINK_TIMEOUT
subsystem to create/delete/dump timeout objects that contain some
specific timeout policy for one flow.
The follow up patches will allow you attach timeout policy object
to conntrack via the CT target and the conntrack extension
infrastructure.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch defines a new interface for l4 protocol trackers:
unsigned int *(*get_timeouts)(struct net *net);
that is used to return the array of unsigned int that contains
the timeouts that will be applied for this flow. This is passed
to the l4proto->new(...) and l4proto->packet(...) functions to
specify the timeout policy.
This interface allows per-net global timeout configuration
(although only DCCP supports this by now) and it will allow
custom custom timeout configuration by means of follow-up
patches.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch adds an array to define the default GRE timeouts.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch moves the retransmission and unacknowledged timeouts
to the tcp_timeouts array. This change is required by follow-up
patches.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use one array to store the UDP timeouts instead of two variables.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
net/netfilter/nf_conntrack_proto.c:70 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
3 locks held by conntrack/3235:
nfnl_lock+0x17/0x20
netlink_dump+0x32/0x240
ctnetlink_dump_table+0x3e/0x170 [nf_conntrack_netlink]
stack backtrace:
Pid: 3235, comm: conntrack Tainted: G W 3.2.0+ #511
Call Trace:
[<ffffffff8108ce45>] lockdep_rcu_suspicious+0xe5/0x100
[<ffffffffa00ec6e1>] __nf_ct_l4proto_find+0x81/0xb0 [nf_conntrack]
[<ffffffffa0115675>] ctnetlink_fill_info+0x215/0x5f0 [nf_conntrack_netlink]
[<ffffffffa0115dc1>] ctnetlink_dump_table+0xd1/0x170 [nf_conntrack_netlink]
[<ffffffff815fbdbf>] netlink_dump+0x7f/0x240
[<ffffffff81090f9d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff815fd34f>] netlink_dump_start+0xdf/0x190
[<ffffffffa0111490>] ? ctnetlink_change_nat_seq_adj+0x160/0x160 [nf_conntrack_netlink]
[<ffffffffa0115cf0>] ? ctnetlink_get_conntrack+0x2a0/0x2a0 [nf_conntrack_netlink]
[<ffffffffa0115ad9>] ctnetlink_get_conntrack+0x89/0x2a0 [nf_conntrack_netlink]
[<ffffffff81603a47>] nfnetlink_rcv_msg+0x467/0x5f0
[<ffffffff81603a7c>] ? nfnetlink_rcv_msg+0x49c/0x5f0
[<ffffffff81603922>] ? nfnetlink_rcv_msg+0x342/0x5f0
[<ffffffff81071b21>] ? get_parent_ip+0x11/0x50
[<ffffffff816035e0>] ? nfnetlink_subsys_register+0x60/0x60
[<ffffffff815fed49>] netlink_rcv_skb+0xa9/0xd0
[<ffffffff81603475>] nfnetlink_rcv+0x15/0x20
[<ffffffff815fe70e>] netlink_unicast+0x1ae/0x1f0
[<ffffffff815fea16>] netlink_sendmsg+0x2c6/0x320
[<ffffffff815b2a87>] sock_sendmsg+0x117/0x130
[<ffffffff81125093>] ? might_fault+0x53/0xb0
[<ffffffff811250dc>] ? might_fault+0x9c/0xb0
[<ffffffff81125093>] ? might_fault+0x53/0xb0
[<ffffffff815b5991>] ? move_addr_to_kernel+0x71/0x80
[<ffffffff815b644e>] sys_sendto+0xfe/0x130
[<ffffffff815b5c94>] ? sys_bind+0xb4/0xd0
[<ffffffff817a8a0e>] ? retint_swapgs+0xe/0x13
[<ffffffff817afcd2>] system_call_fastpath+0x16/0x1b
Reported-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
|
|
In 16059b5 netfilter: merge ipt_LOG and ip6_LOG into xt_LOG, we have
merged ipt_LOG and ip6t_LOG.
However:
IN=wlan0 OUT= MAC=xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx
SRC=213.150.61.61 DST=192.168.1.133 LEN=40 TOS=0x00 PREC=0x00 TTL=117
ID=10539 DF PROTO=TCP SPT=80 DPT=49013 WINDOW=0 RES=0x00 ACK RST
URGP=0 PROTO=UDPLITE SPT=80 DPT=49013 LEN=45843 PROTO=ICMP TYPE=0
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Several missing break in the code led to including bogus layer-4
information. This patch fixes this problem.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
These two headers are not required anymore, they have been
replaced by xt_SAME.h and xt_realm.h.
Florian Westphal pointed out this.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
* identation lowered
* some CPU cycles saved at delayed item variable initialization
Signed-off-by: Tony Zelenoff <antonz@parallels.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Signed-off-by: Tony Zelenoff <antonz@parallels.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
ipt_LOG and ip6_LOG have a lot of common code, merge them
to reduce duplicate code.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch allows you to set expectfn which is specifically used
by the NAT side of most of the existing conntrack helpers.
I have added a symbol map that uses a string as key to look up for
the function that is attached to the expectation object. This is
the best solution I came out with to solve this issue.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch adds the missing bits to create expectations that
are created in NAT setups.
|
|
This patch allows you to set the expectation class.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch allow you to set the helper for newly created
expectations based of the CTA_EXPECT_HELP_NAME attribute.
Before this, the helper set was NULL.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Timed out entries were still matched till the garbage collector
purged them out. The fix is verified in the testsuite.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The "nomatch" keyword and option is added to the hash:*net* types,
by which one can add exception entries to sets. Example:
ipset create test hash:net
ipset add test 192.168.0/24
ipset add test 192.168.0/30 nomatch
In this case the IP addresses from 192.168.0/24 except 192.168.0/30
match the elements of the set.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
If the set is full, the SET target cannot add more elements.
Log warning so that the admin got notified about it.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
iptables's libxt_SET.c depends on these.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
ipset is actually using NFPROTO values rather than AF (xt_set passes
that along).
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pull ARM updates from Russell King.
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7358/1: perf: add PMU hotplug notifier
ARM: 7357/1: perf: fix overflow handling for xscale2 PMUs
ARM: 7356/1: perf: check that we have an event in the PMU IRQ handlers
ARM: 7355/1: perf: clear overflow flag when disabling counter on ARMv7 PMU
ARM: 7354/1: perf: limit sample_period to half max_period in non-sampling mode
ARM: ecard: ensure fake vma vm_flags is setup
ARM: 7346/1: errata: fix PL310 erratum #753970 workaround selection
ARM: 7345/1: errata: update workaround for A9 erratum #743622
ARM: 7348/1: arm/spear600: fix one-shot timer
ARM: 7339/1: amba/serial.h: Include types.h for resolving dependency of type bool
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: "Just a few driver fixups,
nothing exciting."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: wacom - fix 3rd-gen Bamboo MT when 4+ fingers are in use
Input: twl4030-vibra - use proper guard for PM methods
Input: evdev - fix variable initialisation
Input: wacom - add missing LEDS_CLASS to Kconfig
Input: ALPS - fix touchpad detection when buttons are pressed
|
|
There was a latent typo in the C6X KSTK_EIP and KSTK_ESP macros which
caused a problem with a new patch which used them. The broken definitions
were of the form:
#define KSTK_FOO(tsk) (task_pt_regs(task)->foo)
Note the use of task vs tsk. This actually worked before because the
only place in the kernel which used these macros passed in a local
pointer named task.
Signed-off-by: Mark Salter <msalter@redhat.com>
|
|
suspend/resume"
This reverts commit 8f2f748b0656257153bcf0941df8d6060acc5ca6.
It causes some odd regression that we have not figured out, and it's too
late in the -rc series to try to figure it out now.
As reported by Konstantin Khlebnikov, it causes consistent hangs on his
laptop (Thinkpad x220: 2x cores + HT). They can be avoided by adding
calls to "rebuild_sched_domains();" in cpuset_cpu_[in]active() for the
CPU_{ONLINE/DOWN_FAILED/DOWN_PREPARE}_FROZEN cases, but it's not at all
clear why, and it makes no sense.
Konstantin's config doesn't even have CONFIG_CPUSETS enabled, just to
make things even more interesting. So it's not the cpusets, it's just
the scheduling domains.
So until this is understood, revert.
Bisected-reported-and-tested-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
drivers/power/max8998_charger.c"
This reverts commit ce64b8d85de96a1a9538f6dbc960ef592ca05fe8. It is done
via moduleh tree as part of a larger cleanup.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
|
|
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
