summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-07-07ASoC: tas2764: Correct playback volume rangeHector Martin
DVC value 0xc8 is -100dB and 0xc9 is mute; this needs to map to -100.5dB as far as the dB scale is concerned. Fix that and enable the mute flag, so alsamixer correctly shows the control as <0 dB .. -100 dB, mute>. Signed-off-by: Hector Martin <marcan@marcan.st> Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220630075135.2221-3-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: tas2764: Fix and extend FSYNC polarity handlingMartin Povišer
Fix setting of FSYNC polarity in case of LEFT_J and DSP_A/B formats. Do NOT set the SCFG field as was previously done, because that is not correct and is also in conflict with the "ASI1 Source" control which sets the same SCFG field! Also add support for explicit polarity inversion. Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220630075135.2221-2-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: tas2764: Add post reset delaysMartin Povišer
Make sure there is at least 1 ms delay from reset to first command as is specified in the datasheet. This is a fix similar to commit 307f31452078 ("ASoC: tas2770: Insert post reset delay"). Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220630075135.2221-1-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: dt-bindings: Fix description for msm8916Bryan O'Donoghue
For the existing msm8916 bindings the minimum reg/reg-names is 1 not 2. Similarly the minimum interrupt/interrupt-names is 1 not 2. Fixes: f3fc4fbfa2d2 ("ASoC: dt-bindings: Add SC7280 lpass cpu bindings") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220629114012.3282945-1-bryan.odonoghue@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: doc: Capitalize RESET line nameMarek Vasut
Make sure all AC97 interface lines are spelled in capitals, to avoid confusing readers about where the 5th line is. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Mark Brown <broonie@kernel.org> Cc: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20220628165840.152235-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: arizona: Update arizona_aif_cfg_changed to use RX_BCLK_RATECharles Keepax
Currently the function arizona_aif_cfg_changed uses the TX_BCLK_RATE, however this register is not used on wm8998. This was not noticed as previously snd_soc_component_read did not print an error message. However, now the log gets filled with error messages, further more the test for if the LRCLK changed will return spurious results. Update the code to use the RX_BCLK_RATE register, the LRCLK parameters are written to both registers and the RX_BCLK_RATE register is used across all Arizona devices. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220628153409.3266932-4-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: cs47l92: Fix event generation for OUT1 demuxCharles Keepax
cs47l92_put_demux returns the value of snd_soc_dapm_mux_update_power, which returns a 1 if a path was found for the kcontrol. This is obviously different to the expected return a 1 if the control was updated value. This results in spurious notifications to user-space. Update the handling to only return a 1 when the value is changed. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220628153409.3266932-3-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: wm8998: Fix event generation for input muxCharles Keepax
wm8998_inmux_put returns the value of snd_soc_dapm_mux_update_power, which returns a 1 if a path was found for the kcontrol. This is obviously different to the expected return a 1 if the control was updated value. This results in spurious notifications to user-space. Update the handling to only return a 1 when the value is changed. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220628153409.3266932-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: wm5102: Fix event generation for output compensationCharles Keepax
The output compensation controls always returns zero regardless of if the control value was updated. This results in missing notifications to user-space of the control change. Update the handling to return 1 when the value is changed. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220628153409.3266932-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: wcd9335: Use int array instead of bitmask for TX mixersYassine Oudjana
Currently slim_tx_mixer_get reports all TX mixers as enabled when at least one is, due to it reading the entire tx_port_value bitmask without testing the specific bit corresponding to a TX port. Furthermore, using the same bitmask for all capture DAIs makes setting one mixer affect them all. To prevent this, and since the SLIM TX muxes effectively only connect to one of the mixers at a time, turn tx_port_value into an int array storing the DAI index each of the ports is connected to. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Link: https://lore.kernel.org/r/20220622061745.35399-1-y.oudjana@protonmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: tlv320adcx140: Fix tx_mask checkSascha Hauer
The tx_mask check doesn't reflect what the driver and the chip support. The check currently checks for exactly two slots being enabled. The tlv320adcx140 supports anything between one and eight channels, so relax the check accordingly. The tlv320adcx140 supports arbitrary tx_mask settings, but the driver currently only supports adjacent slots beginning with the first slot, so extend the check to check that the first slot is being used and that there are no holes in the tx_mask. Leave a comment to make it's the driver that limits the tx_mask settings, not the chip itself. While at it remove the set-but-unused struct adcx140p_priv::tdm_delay field. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20220624105716.2579539-1-s.hauer@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: max98396: Fix register access for PCM format settingsDaniel Mack
max98396_dai_set_fmt() modifes register 2041 and touches bits in the mask 0x3a. Make sure to use the right mask for that operation. Signed-off-by: Daniel Mack <daniel@zonque.org> Link: https://lore.kernel.org/r/20220624104712.1934484-7-daniel@zonque.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: ti: omap-mcbsp: duplicate sysfs errorDavid Owens
Convert to managed versions of sysfs and clk allocation to simplify unbinding and error handling in probe. Managed sysfs node creation specifically addresses the following error seen the second time probe is attempted after sdma_pcm_platform_register() previously requsted probe deferral: sysfs: cannot create duplicate filename '/devices/platform/68000000.ocp/49022000.mcbsp/max_tx_thres' Signed-off-by: David Owens <dowens@precisionplanting.com> Link: https://lore.kernel.org/r/20220620183744.3176557-1-dowens@precisionplanting.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: audio_graph_card2: Fix port numbers in exampleSascha Hauer
The example in audio-graph-card2.c has multiple nodes with the same name in it. Change the port numbers to get different names. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20220624092601.2445224-1-s.hauer@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: sgtl5000: Fix noise on shutdown/removeFrancesco Dolcini
Put the SGTL5000 in a silent/safe state on shutdown/remove, this is required since the SGTL5000 produces a constant noise on its output after it is configured and its clock is removed. Without this change this is happening every time the module is unbound/removed or from reboot till the clock is enabled again. The issue was experienced on both a Toradex Colibri/Apalis iMX6, but can be easily reproduced everywhere just playing something on the codec and after that removing/unbinding the driver. Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Link: https://lore.kernel.org/r/20220624101301.441314-1-francesco.dolcini@toradex.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ima: Fix a potential integer overflow in ima_appraise_measurementHuaxin Lu
When the ima-modsig is enabled, the rc passed to evm_verifyxattr() may be negative, which may cause the integer overflow problem. Fixes: 39b07096364a ("ima: Implement support for module-style appended signatures") Signed-off-by: Huaxin Lu <luhuaxin1@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2022-07-07MAINTAINERS: mark ARM/PALM TREO SUPPORT orphanLukas Bulwahn
The email address sleep_walker@suse.com and the url http://hackndev.com/, provided in the ARM/PALM TREO SUPPORT section, are not reachable anymore. Make this machine support orphan, and give somebody the chance to step up. Move the maintainer into CREDITS to keep the attribution to his work. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-07x86/entry: Move PUSH_AND_CLEAR_REGS() back into error_entryPeter Zijlstra
Commit ee774dac0da1 ("x86/entry: Move PUSH_AND_CLEAR_REGS out of error_entry()") moved PUSH_AND_CLEAR_REGS out of error_entry, into its own function, in part to avoid calling error_entry() for XenPV. However, commit 7c81c0c9210c ("x86/entry: Avoid very early RET") had to change that because the 'ret' was too early and moved it into idtentry, bloating the text size, since idtentry is expanded for every exception vector. However, with the advent of xen_error_entry() in commit d147553b64bad ("x86/xen: Add UNTRAIN_RET") it became possible to remove PUSH_AND_CLEAR_REGS from idtentry, back into *error_entry(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2022-07-07x86/ibt, objtool: Don't discard text references from tracepoint sectionPeter Zijlstra
On Tue, Jun 28, 2022 at 04:28:58PM +0800, Pengfei Xu wrote: > # ./ftracetest > === Ftrace unit tests === > [1] Basic trace file check [PASS] > [2] Basic test for tracers [PASS] > [3] Basic trace clock test [PASS] > [4] Basic event tracing check [PASS] > [5] Change the ringbuffer size [PASS] > [6] Snapshot and tracing setting [PASS] > [7] trace_pipe and trace_marker [PASS] > [8] Test ftrace direct functions against tracers [UNRESOLVED] > [9] Test ftrace direct functions against kprobes [UNRESOLVED] > [10] Generic dynamic event - add/remove eprobe events [FAIL] > [11] Generic dynamic event - add/remove kprobe events > > It 100% reproduced in step 11 and then missing ENDBR BUG generated: > " > [ 9332.752836] mmiotrace: enabled CPU7. > [ 9332.788612] mmiotrace: disabled. > [ 9337.103426] traps: Missing ENDBR: syscall_regfunc+0x0/0xb0 It turns out that while syscall_regfunc() does have an ENDBR when generated, it gets sealed by objtool's .ibt_endbr_seal list. Since the only text references to this function: $ git grep syscall_regfunc include/linux/tracepoint.h:extern int syscall_regfunc(void); include/trace/events/syscalls.h: syscall_regfunc, syscall_unregfunc include/trace/events/syscalls.h: syscall_regfunc, syscall_unregfunc kernel/tracepoint.c:int syscall_regfunc(void) appear in the __tracepoint section which is excluded by objtool. Fixes: 3c6f9f77e618 ("objtool: Rework ibt and extricate from stack validation") Reported-by: Pengfei Xu <pengfei.xu@intel.com Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/Yrrepdaow4F5kqG0@hirez.programming.kicks-ass.net
2022-07-07x86/bugs: Add Cannon lake to RETBleed affected CPU listPawan Gupta
Cannon lake is also affected by RETBleed, add it to the list. Fixes: 6ad0ad2bf8a6 ("x86/bugs: Report Intel retbleed vulnerability") Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2022-07-07gpiolib: cdev: fix null pointer dereference in linereq_free()Kent Gibson
Fix a kernel NULL pointer dereference reported by gpio kselftests. linereq_free() can be called as part of the cleanup of a failed request, at which time the desc for a line may not have been determined, so it is unsafe to dereference without a check. Add a check prior to dereferencing the line desc. Fixes: 2068339a6c35 ("gpiolib: cdev: Add hardware timestamp clock type") Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-07LoongArch: Fix section mismatch warningTiezhu Yang
init_numa_memory() is annotated __init and not used by any module, thus don't export it. Remove not needed EXPORT_SYMBOL for init_numa_memory() to fix the following section mismatch warning: MODPOST vmlinux.symvers WARNING: modpost: vmlinux.o(___ksymtab+init_numa_memory+0x0): Section mismatch in reference from the variable __ksymtab_init_numa_memory to the function .init.text:init_numa_memory() The symbol init_numa_memory is exported and annotated __init Fix this by removing the __init annotation of init_numa_memory or drop the export. This is build on Linux 5.19-rc4. Fixes: d4b6f1562a3c ("LoongArch: Add Non-Uniform Memory Access (NUMA) support") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-07-07LoongArch: Fix build errors for tinyconfigHuacai Chen
Building loongarch:tinyconfig fails with the following error. ./arch/loongarch/include/asm/page.h: In function 'pfn_valid': ./arch/loongarch/include/asm/page.h:42:32: error: 'PHYS_OFFSET' undeclared Add the missing include file and fix succeeding vdso errors. Fixes: 09cfefb7fa70 ("LoongArch: Add memory management") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-07-07LoongArch: Remove obsolete mentions of vcsrQi Hu
The `vcsr` only exists in the old hardware design, it isn't used in any shipped hardware from Loongson-3A5000 on. Both scalar FP and LSX/LASX instructions use the `fcsr` as their control and status registers now. For example, the RM control bit in fcsr0 is shared by FP, LSX and LASX instructions. Particularly, fcsr16 to fcsr31 are reserved for LSX/LASX now, access to these registers has no visible effect if LSX/LASX is enabled, and will cause SXD/ASXD exceptions if LSX/LASX is not enabled. So, mentions of vcsr are obsolete in the first place (it was just used for debugging), let's remove them. Reviewed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Qi Hu <huqi@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-07-07LoongArch: Drop these obsolete selects in KconfigLukas Bulwahn
Commit fa96b57c1490 ("LoongArch: Add build infrastructure") adds the new file arch/loongarch/Kconfig. As the work on LoongArch was probably quite some time under development, various config symbols have changed and disappeared from the time of initial writing of the Kconfig file and its inclusion in the repository. The following four commits: commit c126a53c2760 ("arch: remove GENERIC_FIND_FIRST_BIT entirely") commit 140c8180eb7c ("arch: remove HAVE_COPY_THREAD_TLS") commit aca52c398389 ("mm: remove CONFIG_HAVE_MEMBLOCK") commit 3f08a302f533 ("mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option") remove the mentioned config symbol, and enable the intended setup by default without configuration. Drop these obsolete selects in loongarch's Kconfig. Reviewed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-07-07fbcon: Use fbcon_info_from_console() in fbcon_modechange_possible()Helge Deller
Use the fbcon_info_from_console() wrapper which was added to kernel v5.19 with commit 409d6c95f9c6 ("fbcon: Introduce wrapper for console->fb_info lookup"). Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
2022-07-07fbmem: Check virtual screen sizes in fb_set_var()Helge Deller
Verify that the fbdev or drm driver correctly adjusted the virtual screen sizes. On failure report the failing driver and reject the screen size change. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org # v5.4+
2022-07-07drm/ssd130x: Fix pre-charge period settingEzequiel Garcia
Fix small typo which causes the mask for the 'precharge1' setting to be used with the 'precharge2' value. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220706184133.210888-1-ezequiel@vanguardiasur.com.ar
2022-07-07fbcon: Prevent that screen size is smaller than font sizeHelge Deller
We need to prevent that users configure a screen size which is smaller than the currently selected font size. Otherwise rendering chars on the screen will access memory outside the graphics memory region. This patch adds a new function fbcon_modechange_possible() which implements this check and which later may be extended with other checks if necessary. The new function is called from the FBIOPUT_VSCREENINFO ioctl handler in fbmem.c, which will return -EINVAL if userspace asked for a too small screen size. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org # v5.4+
2022-07-07fbcon: Disallow setting font bigger than screen sizeHelge Deller
Prevent that users set a font size which is bigger than the physical screen. It's unlikely this may happen (because screens are usually much larger than the fonts and each font char is limited to 32x32 pixels), but it may happen on smaller screens/LCD displays. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org # v4.14+
2022-07-07dma-buf: Fix one use-after-free of fencexinhui pan
Need get the new fence when we replace the old one. Fixes: 047a1b877ed48 ("dma-buf & drm/amdgpu: remove dma_resv workaround") Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220707080241.20060-1-xinhui.pan@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
2022-07-06drm/i915: Fix vm use-after-free in vma destructionThomas Hellström
In vma destruction, the following race may occur: Thread 1: Thread 2: i915_vma_destroy(); ... list_del_init(vma->vm_link); ... mutex_unlock(vma->vm->mutex); __i915_vm_release(); release_references(); And in release_reference() we dereference vma->vm to get to the vm gt pointer, leading to a use-after free. However, __i915_vm_release() grabs the vm->mutex so the vm won't be destroyed before vma->vm->mutex is released, so extract the gt pointer under the vm->mutex to avoid the vma->vm dereference in release_references(). v2: Fix a typo in the commit message (Andi Shyti) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5944 Fixes: e1a7ab4fca0c ("drm/i915: Remove the vm open count") Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by: Nirmoy Das <nirmoy.das@intel.con> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220620123659.381772-1-thomas.hellstrom@linux.intel.com (cherry picked from commit 1926a6b75954fc1a8b44d10bd0c67db957b78cf7) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-07-06drm/i915/guc: ADL-N should use the same GuC FW as ADL-SDaniele Ceraolo Spurio
The only difference between the ADL S and P GuC FWs is the HWConfig support. ADL-N does not support HWConfig, so we should use the same binary as ADL-S, otherwise the GuC might attempt to fetch a config table that does not exist. ADL-N is internally identified as an ADL-P, so we need to special-case it in the FW selection code. Fixes: 7e28d0b26759 ("drm/i915/adl-n: Enable ADL-N platform") Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Tejas Upadhyay <tejas.upadhyay@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220621233005.3952293-1-daniele.ceraolospurio@intel.com (cherry picked from commit 971e4a9781742aaad1587e25fd5582b2dd595ef8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-07-06drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector()Hangyu Hua
If drm_connector_init fails, intel_connector_free will be called to take care of proper free. So it is necessary to drop the refcount of port before intel_connector_free. Fixes: 091a4f91942a ("drm/i915: Handle drm-layer errors in intel_dp_add_mst_connector") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220624130406.17996-1-jose.souza@intel.com Signed-off-by: José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit cea9ed611e85d36a05db52b6457bf584b7d969e2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-07-06Merge branch 'wireguard-patches-for-5-19-rc6'Jakub Kicinski
Jason A. Donenfeld says: ==================== wireguard patches for 5.19-rc6 1) A few small fixups to the selftests, per usual. Of particular note is a fix for a test flake that occurred on especially fast systems that boot in less than a second. 2) An addition during this cycle of some s390 crypto interacted with the way wireguard selects dependencies, resulting in linker errors reported by the kernel test robot. So Vladis sent in a patch for that, which also required a small preparatory fix moving some Kconfig symbols around. ==================== Link: https://lore.kernel.org/r/20220707003157.526645-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06wireguard: Kconfig: select CRYPTO_CHACHA_S390Vladis Dronov
Select the new implementation of CHACHA20 for S390 when available. It is faster than the generic software implementation, but also prevents some linker errors in certain situations. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/linux-kernel/202207030630.6SZVkrWf-lkp@intel.com/ Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06crypto: s390 - do not depend on CRYPTO_HW for SIMD implementationsJason A. Donenfeld
Various accelerated software implementation Kconfig values for S390 were mistakenly placed into drivers/crypto/Kconfig, even though they're mainly just SIMD code and live in arch/s390/crypto/ like usual. This gives them the very unusual dependency on CRYPTO_HW, which leads to problems elsewhere. This patch fixes the issue by moving the Kconfig values for non-hardware drivers into the usual place in crypto/Kconfig. Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06wireguard: selftests: use microvm on x86Jason A. Donenfeld
This makes for faster tests, faster compile time, and allows us to ditch ACPI finally. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06wireguard: selftests: always call kernel makefileJason A. Donenfeld
These selftests are used for much more extensive changes than just the wireguard source files. So always call the kernel's build file, which will do something or nothing after checking the whole tree, per usual. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06wireguard: selftests: use virt machine on m68kJason A. Donenfeld
This should be a bit more stable hopefully. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06wireguard: selftests: set fake real time in initJason A. Donenfeld
Not all platforms have an RTC, and rather than trying to force one into each, it's much easier to just set a fixed time. This is necessary because WireGuard's latest handshakes parameter is returned in wallclock time, and if the system time isn't set, and the system is really fast, then this returns 0, which trips the test. Turning this on requires setting CONFIG_COMPAT_32BIT_TIME=y, as musl doesn't support settimeofday without it. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06r8169: fix accessing unset transport headerHeiner Kallweit
66e4c8d95008 ("net: warn if transport header was not set") added a check that triggers a warning in r8169, see [0]. The commit referenced in the Fixes tag refers to the change from which the patch applies cleanly, there's nothing wrong with this commit. It seems the actual issue (not bug, because the warning is harmless here) was introduced with bdfa4ed68187 ("r8169: use Giant Send"). [0] https://bugzilla.kernel.org/show_bug.cgi?id=216157 Fixes: 8d520b4de3ed ("r8169: work around RTL8125 UDP hw bug") Reported-by: Erhard F. <erhard_f@mailbox.org> Tested-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/1b2c2b29-3dc0-f7b6-5694-97ec526d51a0@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06net: rose: fix UAF bug caused by rose_t0timer_expiryDuoming Zhou
There are UAF bugs caused by rose_t0timer_expiry(). The root cause is that del_timer() could not stop the timer handler that is running and there is no synchronization. One of the race conditions is shown below: (thread 1) | (thread 2) | rose_device_event | rose_rt_device_down | rose_remove_neigh rose_t0timer_expiry | rose_stop_t0timer(rose_neigh) ... | del_timer(&neigh->t0timer) | kfree(rose_neigh) //[1]FREE neigh->dce_mode //[2]USE | The rose_neigh is deallocated in position [1] and use in position [2]. The crash trace triggered by POC is like below: BUG: KASAN: use-after-free in expire_timers+0x144/0x320 Write of size 8 at addr ffff888009b19658 by task swapper/0/0 ... Call Trace: <IRQ> dump_stack_lvl+0xbf/0xee print_address_description+0x7b/0x440 print_report+0x101/0x230 ? expire_timers+0x144/0x320 kasan_report+0xed/0x120 ? expire_timers+0x144/0x320 expire_timers+0x144/0x320 __run_timers+0x3ff/0x4d0 run_timer_softirq+0x41/0x80 __do_softirq+0x233/0x544 ... This patch changes rose_stop_ftimer() and rose_stop_t0timer() in rose_remove_neigh() to del_timer_sync() in order that the timer handler could be finished before the resources such as rose_neigh and so on are deallocated. As a result, the UAF bugs could be mitigated. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220705125610.77971-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06ima: fix violation measurement list recordMimi Zohar
Although the violation digest in the IMA measurement list is always zeroes, the size of the digest should be based on the hash algorithm. Until recently the hash algorithm was hard coded to sha1. Fix the violation digest size included in the IMA measurement list. This is just a cosmetic change which should not affect attestation. Reported-by: Stefan Berger <stefanb@linux.ibm.com> Fixes: 09091c44cb73 ("ima: use IMA default hash algorithm for integrity violations") Tested-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2022-07-06drm/amdgpu/display: disable prefer_shadow for generic fb helpersAlex Deucher
Seems to break hibernation. Disable for now until we can root cause it. Fixes: 087451f372bf ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=216119 Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-06drm/amdgpu: keep fbdev buffers pinned during suspendAlex Deucher
Was dropped when we converted to the generic helpers. Fixes: 087451f372bf ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.") Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-06usbnet: fix memory leak in error caseOliver Neukum
usbnet_write_cmd_async() mixed up which buffers need to be freed in which error case. v2: add Fixes tag v3: fix uninitialized buf pointer Fixes: 877bd862f32b8 ("usbnet: introduce usbnet 3 command helpers") Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220705125351.17309-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06net/mlx5e: Ring the TX doorbell on DMA errorsMaxim Mikityanskiy
TX doorbells may be postponed, because sometimes the driver knows that another packet follows (for example, when xmit_more is true, or when a MPWQE session is closed before transmitting a packet). However, the DMA mapping may fail for the next packet, in which case a new WQE is not posted, the doorbell isn't updated either, and the transmission of the previous packet will be delayed indefinitely. This commit fixes the described rare error flow by posting a NOP and ringing the doorbell on errors to flush all the previous packets. The MPWQE session is closed before that. DMA mapping in the MPWQE flow is moved to the beginning of mlx5e_sq_xmit_mpwqe, because empty sessions are not allowed. Stop room always has enough space for a NOP, because the actual TX WQE is not posted. Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5e: Fix capability check for updating vnic env countersGal Pressman
The existing capability check for vnic env counters only checks for receive steering discards, although we need the counters update for the exposed internal queue oob counter as well. This could result in the latter counter not being updated correctly when the receive steering discards counter is not supported. Fix that by checking whether any counter is supported instead of only the steering counter capability. Fixes: 0cfafd4b4ddf ("net/mlx5e: Add device out of buffer counter") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5e: CT: Use own workqueue instead of mlx5e privRoi Dayan
Allocate a ct priv workqueue instead of using mlx5e priv one so flushing will only be of related CT entries. Also move flushing of the workqueue before rhashtable destroy otherwise entries won't be valid. Fixes: b069e14fff46 ("net/mlx5e: CT: Fix queued up restore put() executing after relevant ft release") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-13 02:47:37 +0000