summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-07-04docs: netdev: document that patch series length limitJakub Kicinski
We had been asking people to avoid massive patch series but it does not appear in the FAQ. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04can: bcm: use call_rcu() instead of costly synchronize_rcu()Oliver Hartkopp
In commit d5f9023fa61e ("can: bcm: delay release of struct bcm_op after synchronize_rcu()") Thadeu Lima de Souza Cascardo introduced two synchronize_rcu() calls in bcm_release() (only once at socket close) and in bcm_delete_rx_op() (called on removal of each single bcm_op). Unfortunately this slow removal of the bcm_op's affects user space applications like cansniffer where the modification of a filter removes 2048 bcm_op's which blocks the cansniffer application for 40(!) seconds. In commit 181d4447905d ("can: gw: use call_rcu() instead of costly synchronize_rcu()") Eric Dumazet replaced the synchronize_rcu() calls with several call_rcu()'s to safely remove the data structures after the removal of CAN ID subscriptions with can_rx_unregister() calls. This patch adopts Erics approach for the can-bcm which should be applicable since the removal of tasklet_kill() in bcm_remove_op() and the introduction of the HRTIMER_MODE_SOFT timer handling in Linux 5.4. Fixes: d5f9023fa61e ("can: bcm: delay release of struct bcm_op after synchronize_rcu()") # >= 5.4 Link: https://lore.kernel.org/all/20220520183239.19111-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org Cc: Eric Dumazet <edumazet@google.com> Cc: Norbert Slusarek <nslusarek@gmx.net> Cc: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15Fabrice Gasnier
The USBH composed of EHCI and OHCI controllers needs the PHY clock to be initialized first, before enabling (gating) them. The reverse is also required when going to suspend. So, add USBPHY clock as 1st entry in both controllers, so the USBPHY PLL gets enabled 1st upon controller init. Upon suspend/resume, this also makes the clock to be disabled/re-enabled in the correct order. This fixes some IRQ storm conditions seen when going to low-power, due to PHY PLL being disabled before all clocks are cleanly gated. Fixes: 949a0c0dec85 ("ARM: dts: stm32: add USB Host (USBH) support to stm32mp157c") Fixes: db7be2cb87ae ("ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-07-04ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMIGabriel Fernandez
Delete the node fixed clock managed by secure world with SCMI. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-07-04ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 boardGabriel Fernandez
LSE clock is provided by SCMI. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-07-04ARM: dts: stm32: use the correct clock source for CEC on stm32mp151Gabriel Fernandez
The peripheral clock of CEC is not LSE but CEC. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-07-04ARM: dts: stm32: fix pwr regulators references to use scmiEtienne Carriere
Fixes stm32mp15*-scmi DTS files introduced in [1] to also access PWR regulators through SCMI service. This is needed since enabling secure only access to RCC clock and reset controllers also enables secure access only on PWR voltage regulators reg11, reg18 and usb33 hence these must also be accessed through SCMI Voltage Domain protocol. This change applies on commit [2] that already corrects issues from commit [1]. Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Link: [1] https://lore.kernel.org/linux-arm-kernel/20220422150952.20587-7-alexandre.torgue@foss.st.com Link: [2] https://lore.kernel.org/linux-arm-kernel/20220613071920.5463-1-alexandre.torgue@foss.st.com Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-07-03mm: split huge PUD on wp_huge_pud fallbackGowans, James
Currently the implementation will split the PUD when a fallback is taken inside the create_huge_pud function. This isn't where it should be done: the splitting should be done in wp_huge_pud, just like it's done for PMDs. Reason being that if a callback is taken during create, there is no PUD yet so nothing to split, whereas if a fallback is taken when encountering a write protection fault there is something to split. It looks like this was the original intention with the commit where the splitting was introduced, but somehow it got moved to the wrong place between v1 and v2 of the patch series. Rebase mistake perhaps. Link: https://lkml.kernel.org/r/6f48d622eb8bce1ae5dd75327b0b73894a2ec407.camel@amazon.com Fixes: 327e9fd48972 ("mm: Split huge pages on write-notify or COW") Signed-off-by: James Gowans <jgowans@amazon.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03nilfs2: fix incorrect masking of permission flags for symlinksRyusuke Konishi
The permission flags of newly created symlinks are wrongly dropped on nilfs2 with the current umask value even though symlinks should have 777 (rwxrwxrwx) permissions: $ umask 0022 $ touch file && ln -s file symlink; ls -l file symlink -rw-r--r--. 1 root root 0 Jun 23 16:29 file lrwxr-xr-x. 1 root root 4 Jun 23 16:29 symlink -> file This fixes the bug by inserting a missing check that excludes symlinks. Link: https://lkml.kernel.org/r/1655974441-5612-1-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: Tommy Pettersson <ptp@lysator.liu.se> Reported-by: Ciprian Craciun <ciprian.craciun@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03mm/rmap: fix dereferencing invalid subpage pointer in try_to_migrate_one()David Hildenbrand
The subpage we calculate is an invalid pointer for device private pages, because device private pages are mapped via non-present device private entries, not ordinary present PTEs. Let's just not compute broken pointers and fixup later. Move the proper assignment of the correct subpage to the beginning of the function and assert that we really only have a single page in our folio. This currently results in a BUG when tying to compute anon_exclusive, because: [ 528.727237] BUG: unable to handle page fault for address: ffffea1fffffffc0 [ 528.739585] #PF: supervisor read access in kernel mode [ 528.745324] #PF: error_code(0x0000) - not-present page [ 528.751062] PGD 44eaf2067 P4D 44eaf2067 PUD 0 [ 528.756026] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 528.760890] CPU: 120 PID: 18275 Comm: hmm-tests Not tainted 5.19.0-rc3-kfd-alex #257 [ 528.769542] Hardware name: AMD Corporation BardPeak/BardPeak, BIOS RTY1002BDS 09/17/2021 [ 528.778579] RIP: 0010:try_to_migrate_one+0x21a/0x1000 [ 528.784225] Code: f6 48 89 c8 48 2b 05 45 d1 6a 01 48 c1 f8 06 48 29 c3 48 8b 45 a8 48 c1 e3 06 48 01 cb f6 41 18 01 48 89 85 50 ff ff ff 74 0b <4c> 8b 33 49 c1 ee 11 41 83 e6 01 48 8b bd 48 ff ff ff e8 3f 99 02 [ 528.805194] RSP: 0000:ffffc90003cdfaa0 EFLAGS: 00010202 [ 528.811027] RAX: 00007ffff7ff4000 RBX: ffffea1fffffffc0 RCX: ffffeaffffffffc0 [ 528.818995] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffc90003cdfaf8 [ 528.826962] RBP: ffffc90003cdfb70 R08: 0000000000000000 R09: 0000000000000000 [ 528.834930] R10: ffffc90003cdf910 R11: 0000000000000002 R12: ffff888194450540 [ 528.842899] R13: ffff888160d057c0 R14: 0000000000000000 R15: 03ffffffffffffff [ 528.850865] FS: 00007ffff7fdb740(0000) GS:ffff8883b0600000(0000) knlGS:0000000000000000 [ 528.859891] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 528.866308] CR2: ffffea1fffffffc0 CR3: 00000001562b4003 CR4: 0000000000770ee0 [ 528.874275] PKRU: 55555554 [ 528.877286] Call Trace: [ 528.880016] <TASK> [ 528.882356] ? lock_is_held_type+0xdf/0x130 [ 528.887033] rmap_walk_anon+0x167/0x410 [ 528.891316] try_to_migrate+0x90/0xd0 [ 528.895405] ? try_to_unmap_one+0xe10/0xe10 [ 528.900074] ? anon_vma_ctor+0x50/0x50 [ 528.904260] ? put_anon_vma+0x10/0x10 [ 528.908347] ? invalid_mkclean_vma+0x20/0x20 [ 528.913114] migrate_vma_setup+0x5f4/0x750 [ 528.917691] dmirror_devmem_fault+0x8c/0x250 [test_hmm] [ 528.923532] do_swap_page+0xac0/0xe50 [ 528.927623] ? __lock_acquire+0x4b2/0x1ac0 [ 528.932199] __handle_mm_fault+0x949/0x1440 [ 528.936876] handle_mm_fault+0x13f/0x3e0 [ 528.941256] do_user_addr_fault+0x215/0x740 [ 528.945928] exc_page_fault+0x75/0x280 [ 528.950115] asm_exc_page_fault+0x27/0x30 [ 528.954593] RIP: 0033:0x40366b ... Link: https://lkml.kernel.org/r/20220623205332.319257-1-david@redhat.com Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Tested-by: Alistair Popple <apopple@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03riscv/mm: fix build error while PAGE_TABLE_CHECK enabled without MMUYueHaibing
mm/page_table_check.c: In function `__page_table_check_pte_clear': mm/page_table_check.c:148:6: error: implicit declaration of function `pte_user_accessible_page'; did you mean `user_access_save'? [-Werror=implicit-function-declaration] if (pte_user_accessible_page(pte)) { ^~~~~~~~~~~~~~~~~~~~~~~~ user_access_save ARCH_SUPPORTS_PAGE_TABLE_CHECK should only enabled with MMU. Link: https://lkml.kernel.org/r/20220624085236.18544-1-yuehaibing@huawei.com Fixes: 3fee229a8eb9 ("riscv/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Tong Tiangen <tongtiangen@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03Documentation: highmem: use literal block for code example in highmem.h commentBagas Sanjaya
When building htmldocs on Linus's tree, there are inline emphasis warnings on include/linux/highmem.h: Documentation/vm/highmem:166: ./include/linux/highmem.h:154: WARNING: Inline emphasis start-string without end-string. Documentation/vm/highmem:166: ./include/linux/highmem.h:157: WARNING: Inline emphasis start-string without end-string. These warnings above are due to comments in code example at the mentioned lines above are enclosed by double dash (--), which confuses Sphinx as inline markup delimiters instead. Fix these warnings by indenting the code example with literal block indentation and making the comments C comments. Link: https://lkml.kernel.org/r/20220622084546.17745-1-bagasdotme@gmail.com Fixes: 85a85e7601263f ("Documentation/vm: move "Using kmap-atomic" to highmem.h") Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: "Fabio M. De Francesco" <fmdefrancesco@gmail.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03mm: sparsemem: fix missing higher order allocation splittingMuchun Song
Higher order allocations for vmemmap pages from buddy allocator must be able to be treated as indepdenent small pages as they can be freed individually by the caller. There is no problem for higher order vmemmap pages allocated at boot time since each individual small page will be initialized at boot time. However, it will be an issue for memory hotplug case since those higher order vmemmap pages are allocated from buddy allocator without initializing each individual small page's refcount. The system will panic in put_page_testzero() when CONFIG_DEBUG_VM is enabled if the vmemmap page is freed. Link: https://lkml.kernel.org/r/20220620023019.94257-1-songmuchun@bytedance.com Fixes: d8d55f5616cf ("mm: sparsemem: use page table lock to protect kernel pmd operations") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03mm/damon: use set_huge_pte_at() to make huge pte oldBaolin Wang
The huge_ptep_set_access_flags() can not make the huge pte old according to the discussion [1], that means we will always mornitor the young state of the hugetlb though we stopped accessing the hugetlb, as a result DAMON will get inaccurate accessing statistics. So changing to use set_huge_pte_at() to make the huge pte old to fix this issue. [1] https://lore.kernel.org/all/Yqy97gXI4Nqb7dYo@arm.com/ Link: https://lkml.kernel.org/r/1655692482-28797-1-git-send-email-baolin.wang@linux.alibaba.com Fixes: 49f4203aae06 ("mm/damon: add access checking for hugetlb pages") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: SeongJae Park <sj@kernel.org> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03sh: convert nommu io{re,un}map() to static inline functionsGeert Uytterhoeven
Recently, nommu iounmap() was converted from a static inline function to a macro again, basically reverting commit 4580ba4ad2e6b8dd ("sh: Convert iounmap() macros to inline functions"). With -Werror, this leads to build failures like: drivers/iio/adc/xilinx-ams.c: In function `ams_iounmap_ps': drivers/iio/adc/xilinx-ams.c:1195:14: error: unused variable `ams' [-Werror=unused-variable] 1195 | struct ams *ams = data; | ^~~ Fix this by replacing the macros for ioremap() and iounmap() by static inline functions, based on <asm-generic/io.h>. Link: https://lkml.kernel.org/r/8d1b1766260961799b04035e7bc39a7f59729f72.1655708312.git.geert+renesas@glider.be Fixes: 13f1fc870dd74713 ("sh: move the ioremap implementation out of line") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03mm: userfaultfd: fix UFFDIO_CONTINUE on fallocated shmem pagesAxel Rasmussen
When fallocate() is used on a shmem file, the pages we allocate can end up with !PageUptodate. Since UFFDIO_CONTINUE tries to find the existing page the user wants to map with SGP_READ, we would fail to find such a page, since shmem_getpage_gfp returns with a "NULL" pagep for SGP_READ if it discovers !PageUptodate. As a result, UFFDIO_CONTINUE returns -EFAULT, as it would do if the page wasn't found in the page cache at all. This isn't the intended behavior. UFFDIO_CONTINUE is just trying to find if a page exists, and doesn't care whether it still needs to be cleared or not. So, instead of SGP_READ, pass in SGP_NOALLOC. This is the same, except for one critical difference: in the !PageUptodate case, SGP_NOALLOC will clear the page and then return it. With this change, UFFDIO_CONTINUE works properly (succeeds) on a shmem file which has been fallocated, but otherwise not modified. Link: https://lkml.kernel.org/r/20220610173812.1768919-1-axelrasmussen@google.com Fixes: 153132571f02 ("userfaultfd/shmem: support UFFDIO_CONTINUE for shmem") Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03Linux 5.19-rc5v5.19-rc5Linus Torvalds
2022-07-03lockref: remove unused 'lockref_get_or_lock()' functionLinus Torvalds
Looking at the conditional lock acquire functions in the kernel due to the new sparse support (see commit 4a557a5d1a61 "sparse: introduce conditional lock acquire function attribute"), it became obvious that the lockref code has a couple of them, but they don't match the usual naming convention for the other ones, and their return value logic is also reversed. In the other very similar places, the naming pattern is '*_and_lock()' (eg 'atomic_put_and_lock()' and 'refcount_dec_and_lock()'), and the function returns true when the lock is taken. The lockref code is superficially very similar to the refcount code, only with the special "atomic wrt the embedded lock" semantics. But instead of the '*_and_lock()' naming it uses '*_or_lock()'. And instead of returning true in case it took the lock, it returns true if it *didn't* take the lock. Now, arguably the reflock code is quite logical: it really is a "either decrement _or_ lock" kind of situation - and the return value is about whether the operation succeeded without any special care needed. So despite the similarities, the differences do make some sense, and maybe it's not worth trying to unify the different conditional locking primitives in this area. But while looking at this all, it did become obvious that the 'lockref_get_or_lock()' function hasn't actually had any users for almost a decade. The only user it ever had was the shortlived 'd_rcu_to_refcount()' function, and it got removed and replaced with 'lockref_get_not_dead()' back in 2013 in commits 0d98439ea3c6 ("vfs: use lockred 'dead' flag to mark unrecoverably dead dentries") and e5c832d55588 ("vfs: fix dentry RCU to refcounting possibly sleeping dput()") In fact, that single use was removed less than a week after the whole function was introduced in commit b3abd80250c1 ("lockref: add 'lockref_get_or_lock() helper") so this function has been around for a decade, but only had a user for six days. Let's just put this mis-designed and unused function out of its misery. We can think about the naming and semantic oddities of the remaining 'lockref_put_or_lock()' later, but at least that function has users. And while the naming is different and the return value doesn't match, that function matches the whole '{atomic,refcount}_dec_and_test()' pattern much better (ie the magic happens when the count goes down to zero, not when it is incremented from zero). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-07-03Merge tag 'qcom-arm64-fixes-for-5.19' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 DT fixes for v5.19 This removes duplicate includes in the sc7180-trogdor files, which accidentally ended up disabling nodes intended to be enabled. It corrects identifiers for CPU6/7 on MSM8994. On SM8450 the UFS node's interconnects property is updated to match the #interconnect-cells, avoiding sync_state issues and the GIC ITS is defined, to correct the references from the PCIe nodes. On SDM845 the display subsystem's AHB clock is corrected and on msm8992 devices, the supplies for lvs 1 and 2 are correctly specified. Lastly, a welcome addition of Konrad as reviewer for the Qualcomm SoC. * tag 'qcom-arm64-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo MAINTAINERS: Add myself as a reviewer for Qualcomm ARM/64 support arm64: dts: qcom: sdm845: use dispcc AHB clock for mdss node arm64: dts: qcom: sm8450 add ITS device tree node arm64: dts: qcom: msm8994: Fix CPU6/7 reg values arm64: dts: qcom: sm8450: fix interconnects property of UFS node arm64: dts: qcom: Remove duplicate sc7180-trogdor include on lazor/homestar Link: https://lore.kernel.org/r/20220703030208.408109-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-03sparse: introduce conditional lock acquire function attributeLinus Torvalds
The kernel tends to try to avoid conditional locking semantics because it makes it harder to think about and statically check locking rules, but we do have a few fundamental locking primitives that take locks conditionally - most obviously the 'trylock' functions. That has always been a problem for 'sparse' checking for locking imbalance, and we've had a special '__cond_lock()' macro that we've used to let sparse know how the locking works: # define __cond_lock(x,c) ((c) ? ({ __acquire(x); 1; }) : 0) so that you can then use this to tell sparse that (for example) the spinlock trylock macro ends up acquiring the lock when it succeeds, but not when it fails: #define raw_spin_trylock(lock) __cond_lock(lock, _raw_spin_trylock(lock)) and then sparse can follow along the locking rules when you have code like if (!spin_trylock(&dentry->d_lock)) return LRU_SKIP; .. sparse sees that the lock is held here.. spin_unlock(&dentry->d_lock); and sparse ends up happy about the lock contexts. However, this '__cond_lock()' use does result in very ugly header files, and requires you to basically wrap the real function with that macro that uses '__cond_lock'. Which has made PeterZ NAK things that try to fix sparse warnings over the years [1]. To solve this, there is now a very experimental patch to sparse that basically does the exact same thing as '__cond_lock()' did, but using a function attribute instead. That seems to make PeterZ happy [2]. Note that this does not replace existing use of '__cond_lock()', but only exposes the new proposed attribute and uses it for the previously unannotated 'refcount_dec_and_lock()' family of functions. For existing sparse installations, this will make no difference (a negative output context was ignored), but if you have the experimental sparse patch it will make sparse now understand code that uses those functions, the same way '__cond_lock()' makes sparse understand the very similar 'atomic_dec_and_lock()' uses that have the old '__cond_lock()' annotations. Note that in some cases this will silence existing context imbalance warnings. But in other cases it may end up exposing new sparse warnings for code that sparse just didn't see the locking for at all before. This is a trial, in other words. I'd expect that if it ends up being successful, and new sparse releases end up having this new attribute, we'll migrate the old-style '__cond_lock()' users to use the new-style '__cond_acquires' function attribute. The actual experimental sparse patch was posted in [3]. Link: https://lore.kernel.org/all/20130930134434.GC12926@twins.programming.kicks-ass.net/ [1] Link: https://lore.kernel.org/all/Yr60tWxN4P568x3W@worktop.programming.kicks-ass.net/ [2] Link: https://lore.kernel.org/all/CAHk-=wjZfO9hGqJ2_hGQG3U_XzSh9_XaXze=HgPdvJbgrvASfA@mail.gmail.com/ [3] Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Aring <aahringo@redhat.com> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-07-03Merge tag 'xfs-5.19-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fixes from Darrick Wong: "This fixes some stalling problems and corrects the last of the problems (I hope) observed during testing of the new atomic xattr update feature. - Fix statfs blocking on background inode gc workers - Fix some broken inode lock assertion code - Fix xattr leaf buffer leaks when cancelling a deferred xattr update operation - Clean up xattr recovery to make it easier to understand. - Fix xattr leaf block verifiers tripping over empty blocks. - Remove complicated and error prone xattr leaf block bholding mess. - Fix a bug where an rt extent crossing EOF was treated as "posteof" blocks and cleaned unnecessarily. - Fix a UAF when log shutdown races with unmount" * tag 'xfs-5.19-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: prevent a UAF when log IO errors race with unmount xfs: dont treat rt extents beyond EOF as eofblocks to be cleared xfs: don't hold xattr leaf buffers across transaction rolls xfs: empty xattr leaf header blocks are not corruption xfs: clean up the end of xfs_attri_item_recover xfs: always free xattri_leaf_bp when cancelling a deferred op xfs: use invalidate_lock to check the state of mmap_lock xfs: factor out the common lock flags assert xfs: introduce xfs_inodegc_push() xfs: bound maximum wait time for inodegc work
2022-07-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Insufficient validation of element datatype and length in nft_setelem_parse_data(). At least commit 7d7402642eaf updates maximum element data area up to 64 bytes when only 16 bytes where supported at the time. Support for larger element size came later in fdb9c405e35b though. Picking this older commit as Fixes: tag to be safe than sorry. 2) Memleak in pipapo destroy path, reproducible when transaction in aborted. This is already triggering in the existing netfilter test infrastructure since more recent new tests are covering this path. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02netfilter: nft_set_pipapo: release elements in clone from abort pathPablo Neira Ayuso
New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ #155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] <TASK> [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-07-02netfilter: nf_tables: stricter validation of element dataPablo Neira Ayuso
Make sure element data type and length do not mismatch the one specified by the set declaration. Fixes: 7d7402642eaf ("netfilter: nf_tables: variable sized set element keys / data") Reported-by: Hugues ANGUELKOV <hanguelkov@randorisec.fr> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-07-02Merge tag 'nfsd-5.19-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: "Notable regression fixes: - Fix NFSD crash during NFSv4.2 READ_PLUS operation - Fix incorrect status code returned by COMMIT operation" * tag 'nfsd-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: SUNRPC: Fix READ_PLUS crasher NFSD: restore EINVAL error translation in nfsd_commit()
2022-07-02Merge tag 'for-5.19/parisc-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: "Two important fixes for bugs in code which was added in 5.18: - Fix userspace signal failures on 32-bit kernel due to a bug in vDSO - Fix 32-bit load-word unalignment exception handler which returned wrong values" * tag 'for-5.19/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix vDSO signal breakage on 32-bit kernel parisc/unaligned: Fix emulate_ldw() breakage
2022-07-02parisc: Fix vDSO signal breakage on 32-bit kernelHelge Deller
Addition of vDSO support for parisc in kernel v5.18 suddenly broke glibc signal testcases on a 32-bit kernel. The trampoline code (sigtramp.S) which is mapped into userspace includes an offset to the context data on the stack, which is used by gdb and glibc to get access to registers. In a 32-bit kernel we used by mistake the offset into the compat context (which is valid on a 64-bit kernel only) instead of the offset into the "native" 32-bit context. Reported-by: John David Anglin <dave.anglin@bell.net> Tested-by: John David Anglin <dave.anglin@bell.net> Fixes: df24e1783e6e ("parisc: Add vDSO support") CC: stable@vger.kernel.org # 5.18 Signed-off-by: Helge Deller <deller@gmx.de>
2022-07-02Merge tag 'perf-tools-fixes-for-v5.19-2022-07-02' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - BPF program info linear (BPIL) data is accessed assuming 64-bit alignment resulting in undefined behavior as the data is just byte aligned. Fix it, Found using -fsanitize=undefined. - Fix 'perf offcpu' build on old kernels wrt task_struct's state/__state field. - Fix perf_event_attr.sample_type setting on the 'offcpu-time' event synthesized by the 'perf offcpu' tool. - Don't bail out when synthesizing PERF_RECORD_ events for pre-existing threads when one goes away while parsing its procfs entries. - Don't sort the task scan result from /proc, its not needed and introduces bugs when the main thread isn't the first one to be processed. - Fix uninitialized 'offset' variable on aarch64 in the unwind code. - Sync KVM headers with the kernel sources. * tag 'perf-tools-fixes-for-v5.19-2022-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf synthetic-events: Ignore dead threads during event synthesis perf synthetic-events: Don't sort the task scan result from /proc perf unwind: Fix unitialized 'offset' variable on aarch64 tools headers UAPI: Sync linux/kvm.h with the kernel sources perf bpf: 8 byte align bpil data tools kvm headers arm64: Update KVM headers from the kernel sources perf offcpu: Accept allowed sample types only perf offcpu: Fix build failure on old kernels
2022-07-02Merge tag 'powerpc-5.19-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix BPF uapi confusion about the correct type of bpf_user_pt_regs_t. - Fix virt_addr_valid() when memory is hotplugged above the boot-time high_memory value. - Fix a bug in 64-bit Book3E map_kernel_page() which would incorrectly allocate a PMD page at PUD level. - Fix a couple of minor issues found since we enabled KASAN for 64-bit Book3S. Thanks to Aneesh Kumar K.V, Cédric Le Goater, Christophe Leroy, Kefeng Wang, Liam Howlett, Nathan Lynch, and Naveen N. Rao. * tag 'powerpc-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/memhotplug: Add add_pages override for PPC powerpc/bpf: Fix use of user_pt_regs in uapi powerpc/prom_init: Fix kernel config grep powerpc/book3e: Fix PUD allocation size in map_kernel_page() powerpc/xive/spapr: correct bitmap allocation size
2022-07-02MAINTAINERS: add Wenjia as SMC maintainerKarsten Graul
Add Wenjia as maintainer for Shared Memory Communications (SMC) Sockets. Acked-by: Wenjia Zhang <wenjia@linux.ibm.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02misc: rtsx_usb: set return value in rsp_buf alloc err pathShuah Khan
Set return value in rsp_buf alloc error path before going to error handling. drivers/misc/cardreader/rtsx_usb.c:639:6: warning: variable 'ret' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (!ucr->rsp_buf) ^~~~~~~~~~~~~ drivers/misc/cardreader/rtsx_usb.c:678:9: note: uninitialized use occurs here return ret; ^~~ drivers/misc/cardreader/rtsx_usb.c:639:2: note: remove the 'if' if its condition is always false if (!ucr->rsp_buf) ^~~~~~~~~~~~~~~~~~ drivers/misc/cardreader/rtsx_usb.c:622:9: note: initialize the variable 'ret' to silence this warning int ret; ^ = 0 Fixes: 3776c7855985 ("misc: rtsx_usb: use separate command and response buffers") Reported-by: kernel test robot <lkp@intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20220701165352.15687-1-skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-02perf synthetic-events: Ignore dead threads during event synthesisNamhyung Kim
When it synthesize various task events, it scans the list of task first and then accesses later. There's a window threads can die between the two and proc entries may not be available. Instead of bailing out, we can ignore that thread and move on. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220701205458.985106-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-02perf synthetic-events: Don't sort the task scan result from /procNamhyung Kim
It should not sort the result as procfs already returns a proper ordering of tasks. Actually sorting the order caused problems that it doesn't guararantee to process the main thread first. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220701205458.985106-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-02perf unwind: Fix unitialized 'offset' variable on aarch64Ivan Babrou
Commit dc2cf4ca866f5715 ("perf unwind: Fix segbase for ld.lld linked objects") uncovered the following issue on aarch64: util/unwind-libunwind-local.c: In function 'find_proc_info': util/unwind-libunwind-local.c:386:28: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] 386 | if (ofs > 0) { | ^ util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here 199 | u64 address, offset; | ^~~~~~ util/unwind-libunwind-local.c:371:20: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] 371 | if (ofs <= 0) { | ^ util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here 199 | u64 address, offset; | ^~~~~~ util/unwind-libunwind-local.c:363:20: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] 363 | if (ofs <= 0) { | ^ util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here 199 | u64 address, offset; | ^~~~~~ In file included from util/libunwind/arm64.c:37: Fixes: dc2cf4ca866f5715 ("perf unwind: Fix segbase for ld.lld linked objects") Signed-off-by: Ivan Babrou <ivan@cloudflare.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Fangrui Song <maskray@google.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: kernel-team@cloudflare.com Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220701182046.12589-1-ivan@cloudflare.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-01selftests/net: fix section name when using xdp_dummy.oHangbin Liu
Since commit 8fffa0e3451a ("selftests/bpf: Normalize XDP section names in selftests") the xdp_dummy.o's section name has changed to xdp. But some tests are still using "section xdp_dummy", which make the tests failed. Fix them by updating to the new section name. Fixes: 8fffa0e3451a ("selftests/bpf: Normalize XDP section names in selftests") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20220630062228.3453016-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski
Daniel Borkmann says: ==================== pull-request: bpf 2022-07-02 We've added 7 non-merge commits during the last 14 day(s) which contain a total of 6 files changed, 193 insertions(+), 86 deletions(-). The main changes are: 1) Fix clearing of page contiguity when unmapping XSK pool, from Ivan Malov. 2) Two verifier fixes around bounds data propagation, from Daniel Borkmann. 3) Fix fprobe sample module's parameter descriptions, from Masami Hiramatsu. 4) General BPF maintainer entry revamp to better scale patch reviews. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, selftests: Add verifier test case for jmp32's jeq/jne bpf, selftests: Add verifier test case for imm=0,umin=0,umax=1 scalar bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals bpf: Fix incorrect verifier simulation around jmp32's jeq/jne xsk: Clear page contiguity bit when unmapping pool bpf, docs: Better scale maintenance of BPF subsystem fprobe, samples: Add module parameter descriptions ==================== Link: https://lore.kernel.org/r/20220701230121.10354-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01Merge tag 'libnvdimm-fixes-5.19-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fix from Vishal Verma: - Fix a bug in the libnvdimm 'BTT' (Block Translation Table) driver where accounting for poison blocks to be cleared was off by one, causing a failure to clear the the last badblock in an nvdimm region. * tag 'libnvdimm-fixes-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm: Fix badblocks clear off-by-one error
2022-07-01doc: module: update file referencesMasahiro Yamada
Adjust documents to the file moves made by commit cfc1d277891e ("module: Move all into module/"). Thanks to Yanteng Si for helping me to update Documentation/translations/zh_CN/core-api/kernel-api.rst Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-01module: Fix "warning: variable 'exit' set but not used"Christophe Leroy
When CONFIG_MODULE_UNLOAD is not selected, 'exit' is set but never used. It is not possible to replace the #ifdef CONFIG_MODULE_UNLOAD by IS_ENABLED(CONFIG_MODULE_UNLOAD) because mod->exit doesn't exist when CONFIG_MODULE_UNLOAD is not selected. And because of the rcu_read_lock_sched() section it is not easy to regroup everything in a single #ifdef. Let's regroup partially and add missing #ifdef to completely opt out the use of 'exit' when CONFIG_MODULE_UNLOAD is not selected. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-01module: Fix selfAssignment cppcheck warningChristophe Leroy
cppcheck reports the following warnings: kernel/module/main.c:1455:26: warning: Redundant assignment of 'mod->core_layout.size' to itself. [selfAssignment] mod->core_layout.size = strict_align(mod->core_layout.size); ^ kernel/module/main.c:1489:26: warning: Redundant assignment of 'mod->init_layout.size' to itself. [selfAssignment] mod->init_layout.size = strict_align(mod->init_layout.size); ^ kernel/module/main.c:1493:26: warning: Redundant assignment of 'mod->init_layout.size' to itself. [selfAssignment] mod->init_layout.size = strict_align(mod->init_layout.size); ^ kernel/module/main.c:1504:26: warning: Redundant assignment of 'mod->init_layout.size' to itself. [selfAssignment] mod->init_layout.size = strict_align(mod->init_layout.size); ^ kernel/module/main.c:1459:26: warning: Redundant assignment of 'mod->data_layout.size' to itself. [selfAssignment] mod->data_layout.size = strict_align(mod->data_layout.size); ^ kernel/module/main.c:1463:26: warning: Redundant assignment of 'mod->data_layout.size' to itself. [selfAssignment] mod->data_layout.size = strict_align(mod->data_layout.size); ^ kernel/module/main.c:1467:26: warning: Redundant assignment of 'mod->data_layout.size' to itself. [selfAssignment] mod->data_layout.size = strict_align(mod->data_layout.size); ^ This is due to strict_align() being a no-op when CONFIG_STRICT_MODULE_RWX is not selected. Transform strict_align() macro into an inline function. It will allow type checking and avoid the selfAssignment warning. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-01modules: Fix corruption of /proc/kallsymsAdrian Hunter
The commit 91fb02f31505 ("module: Move kallsyms support into a separate file") changed from using strlcpy() to using strscpy() which created a buffer overflow. That happened because: 1) an incorrect value was passed as the buffer length 2) strscpy() (unlike strlcpy()) may copy beyond the length of the input string when copying word-by-word. The assumption was that because it was already known that the strings being copied would fit in the space available, it was not necessary to correctly set the buffer length. strscpy() breaks that assumption because although it will not touch bytes beyond the given buffer length it may write bytes beyond the input string length when writing word-by-word. The result of the buffer overflow is to corrupt the symbol type information that follows. e.g. $ sudo cat -v /proc/kallsyms | grep '\^' | head ffffffffc0615000 ^@ rfcomm_session_get [rfcomm] ffffffffc061c060 ^@ session_list [rfcomm] ffffffffc06150d0 ^@ rfcomm_send_frame [rfcomm] ffffffffc0615130 ^@ rfcomm_make_uih [rfcomm] ffffffffc07ed58d ^@ bnep_exit [bnep] ffffffffc07ec000 ^@ bnep_rx_control [bnep] ffffffffc07ec1a0 ^@ bnep_session [bnep] ffffffffc07e7000 ^@ input_leds_event [input_leds] ffffffffc07e9000 ^@ input_leds_handler [input_leds] ffffffffc07e7010 ^@ input_leds_disconnect [input_leds] Notably, the null bytes (represented above by ^@) can confuse tools. Fix by correcting the buffer length. Fixes: 91fb02f31505 ("module: Move kallsyms support into a separate file") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-01Merge tag 'amlogic-arm-for-v5.20' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes Amlogic ARM mach-meson changes for v5.20: - Fix refcount leak in meson_smp_prepare_cpus * tag 'amlogic-arm-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: meson: Fix refcount leak in meson_smp_prepare_cpus Link: https://lore.kernel.org/r/cbf6bcb5-c7be-40fe-4436-4578c9d6c532@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-01Merge tag 'scmi-fixes-5.19-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm SCMI firmware driver fixes for v5.19 Few more fixes to address: 1. Issue reported on Juno with HDLCD clock which turned out to be yet another firmware issue. The firmware is not conformant to the spec and we now have to workaround as this may be copied to other platforms as well. The spec expects to return size of 3 for a range clock rate description while the firmware returns 1. We have other ways to validate all the 3 entries the driver reads are polpulated and we use the same to workaround this firmware bug. 2. Optee transport not setting the correct reponse length which is similar to the one reported earlier on Rockchip platform. 3. Drop the usage of the deprecated ida_simple_{get,remove} and migrate to the ida_{alloc,free} * tag 'scmi-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API firmware: arm_scmi: Fix response size warning for OPTEE transport firmware: arm_scmi: Relax CLOCK_DESCRIBE_RATES out-of-spec checks Link: https://lore.kernel.org/r/20220628133315.699803-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-01Merge tag 'thermal-5.19-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fix from Rafael Wysocki: "Add a new CPU ID to the list of supported processors in the intel_tcc_cooling driver (Sumeet Pawnikar)" * tag 'thermal-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: intel_tcc_cooling: Add TCC cooling support for RaptorLake
2022-07-01bpf, selftests: Add verifier test case for jmp32's jeq/jneDaniel Borkmann
Add a test case to trigger the verifier's incorrect conclusion in the case of jmp32's jeq/jne. Also here, make use of dead code elimination, so that we can see the verifier bailing out on unfixed kernels. Before: # ./test_verifier 724 #724/p jeq32/jne32: bounds checking FAIL Failed to load prog 'Permission denied'! R4 !read_ok verification time 8 usec stack depth 0 processed 8 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 0 Summary: 0 PASSED, 0 SKIPPED, 1 FAILED After: # ./test_verifier 724 #724/p jeq32/jne32: bounds checking OK Summary: 1 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220701124727.11153-4-daniel@iogearbox.net
2022-07-01bpf, selftests: Add verifier test case for imm=0,umin=0,umax=1 scalarDaniel Borkmann
Add a test case to trigger the constant scalar issue which leaves the register in scalar(imm=0,umin=0,umax=1,var_off=(0x0; 0x0)) state. Make use of dead code elimination, so that we can see the verifier bailing out on unfixed kernels. For the condition, we use jle given it checks on umax bound. Before: # ./test_verifier 743 #743/p jump & dead code elimination FAIL Failed to load prog 'Permission denied'! R4 !read_ok verification time 11 usec stack depth 0 processed 13 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1 Summary: 0 PASSED, 0 SKIPPED, 1 FAILED After: # ./test_verifier 743 #743/p jump & dead code elimination OK Summary: 1 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220701124727.11153-3-daniel@iogearbox.net
2022-07-01bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_valsDaniel Borkmann
Kuee reported a corner case where the tnum becomes constant after the call to __reg_bound_offset(), but the register's bounds are not, that is, its min bounds are still not equal to the register's max bounds. This in turn allows to leak pointers through turning a pointer register as is into an unknown scalar via adjust_ptr_min_max_vals(). Before: func#0 @0 0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) 1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) 2: (87) r3 = -r3 ; R3_w=scalar() 3: (87) r3 = -r3 ; R3_w=scalar() 4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881) 5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 6: (95) exit from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 8: (95) exit from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 9: (07) r3 += -32767 ; R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)) <--- [*] 10: (95) exit What can be seen here is that R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) after the operation R3 += -32767 results in a 'malformed' constant, that is, R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)). Intersecting with var_off has not been done at that point via __update_reg_bounds(), which would have improved the umax to be equal to umin. Refactor the tnum <> min/max bounds information flow into a reg_bounds_sync() helper and use it consistently everywhere. After the fix, bounds have been corrected to R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) and thus the register is regarded as a 'proper' constant scalar of 0. After: func#0 @0 0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) 1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) 2: (87) r3 = -r3 ; R3_w=scalar() 3: (87) r3 = -r3 ; R3_w=scalar() 4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881) 5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 6: (95) exit from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 8: (95) exit from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 9: (07) r3 += -32767 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) <--- [*] 10: (95) exit Fixes: b03c9f9fdc37 ("bpf/verifier: track signed and unsigned min/max values") Reported-by: Kuee K1r0a <liulin063@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20220701124727.11153-2-daniel@iogearbox.net
2022-07-01bpf: Fix incorrect verifier simulation around jmp32's jeq/jneDaniel Borkmann
Kuee reported a quirk in the jmp32's jeq/jne simulation, namely that the register value does not match expectations for the fall-through path. For example: Before fix: 0: R1=ctx(off=0,imm=0) R10=fp0 0: (b7) r2 = 0 ; R2_w=P0 1: (b7) r6 = 563 ; R6_w=P563 2: (87) r2 = -r2 ; R2_w=Pscalar() 3: (87) r2 = -r2 ; R2_w=Pscalar() 4: (4c) w2 |= w6 ; R2_w=Pscalar(umin=563,umax=4294967295,var_off=(0x233; 0xfffffdcc),s32_min=-2147483085) R6_w=P563 5: (56) if w2 != 0x8 goto pc+1 ; R2_w=P571 <--- [*] 6: (95) exit R0 !read_ok After fix: 0: R1=ctx(off=0,imm=0) R10=fp0 0: (b7) r2 = 0 ; R2_w=P0 1: (b7) r6 = 563 ; R6_w=P563 2: (87) r2 = -r2 ; R2_w=Pscalar() 3: (87) r2 = -r2 ; R2_w=Pscalar() 4: (4c) w2 |= w6 ; R2_w=Pscalar(umin=563,umax=4294967295,var_off=(0x233; 0xfffffdcc),s32_min=-2147483085) R6_w=P563 5: (56) if w2 != 0x8 goto pc+1 ; R2_w=P8 <--- [*] 6: (95) exit R0 !read_ok As can be seen on line 5 for the branch fall-through path in R2 [*] is that given condition w2 != 0x8 is false, verifier should conclude that r2 = 8 as upper 32 bit are known to be zero. However, verifier incorrectly concludes that r2 = 571 which is far off. The problem is it only marks false{true}_reg as known in the switch for JE/NE case, but at the end of the function, it uses {false,true}_{64,32}off to update {false,true}_reg->var_off and they still hold the prior value of {false,true}_reg->var_off before it got marked as known. The subsequent __reg_combine_32_into_64() then propagates this old var_off and derives new bounds. The information between min/max bounds on {false,true}_reg from setting the register to known const combined with the {false,true}_reg->var_off based on the old information then derives wrong register data. Fix it by detangling the BPF_JEQ/BPF_JNE cases and updating relevant {false,true}_{64,32}off tnums along with the register marking to known constant. Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: Kuee K1r0a <liulin063@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20220701124727.11153-1-daniel@iogearbox.net
2022-07-01Merge tag 'pm-5.19-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix some issues in cpufreq drivers and some issues in devfreq: - Fix error code path issues related PROBE_DEFER handling in devfreq (Christian Marangi) - Revert an editing accident in SPDX-License line in the devfreq passive governor (Lukas Bulwahn) - Fix refcount leak in of_get_devfreq_events() in the exynos-ppmu devfreq driver (Miaoqian Lin) - Use HZ_PER_KHZ macro in the passive devfreq governor (Yicong Yang) - Fix missing of_node_put for qoriq and pmac32 driver (Liang He) - Fix issues around throttle interrupt for qcom driver (Stephen Boyd) - Add MT8186 to cpufreq-dt-platdev blocklist (AngeloGioacchino Del Regno) - Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su)" * tag 'pm-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / devfreq: passive: revert an editing accident in SPDX-License line PM / devfreq: Fix kernel warning with cpufreq passive register fail PM / devfreq: Rework freq_table to be local to devfreq struct PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events PM / devfreq: passive: Use HZ_PER_KHZ macro in units.h PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER PM / devfreq: Mute warning on governor PROBE_DEFER PM / devfreq: Fix kernel panic with cpu based scaling to passive gov cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist cpufreq: pmac32-cpufreq: Fix refcount leak bug cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c cpufreq: amd-pstate: Add resume and suspend callbacks
2022-07-01Merge branch 'pm-cpufreq'Rafael J. Wysocki
Merge cpufreq fixes for 5.19-rc5, including ARM cpufreq fixes and the following one: - Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su). * pm-cpufreq: cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist cpufreq: pmac32-cpufreq: Fix refcount leak bug cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c cpufreq: amd-pstate: Add resume and suspend callbacks
generated by cgit (git 2.34.1) at 2025-09-13 09:03:22 +0000