summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-07-19arm64: dts: nuvoton: Add initial NPCM8XX device treeTomer Maimon
This adds initial device tree support for the Nuvoton NPCM845 Board Management controller (BMC) SoC family. The NPCM845 based quad-core Cortex-A35 ARMv8 architecture and have various peripheral IPs. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-19arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoCTomer Maimon
This adds support for the Nuvoton NPCM8XX Board Management controller (BMC) SoC family. The NPCM8XX based quad-core Cortex-A35 ARMv8 architecture. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-19dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible stringTomer Maimon
Add a compatible string for Nuvoton BMC NPCM845 global control registers. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-19dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible stringTomer Maimon
Add a compatible string for Nuvoton BMC NPCM845 SoC and a board specific device tree for the NPCM845 (Arbel) evaluation board. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-19dt-bindings: arm: npcm: Add maintainerTomer Maimon
Add Tomer Maimon to the maintainers list. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-19reset: npcm: Add NPCM8XX supportTomer Maimon
Updated the NPCM reset driver to add support for Nuvoton BMC NPCM8XX SoC. As part of adding NPCM8XX support: - Add NPCM8XX specific compatible string. - Add NPCM8XX USB reset. - Add data to handle architecture-specific reset parameters. - Some of the Reset Id and number of resets are different from NPCM7XX. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-19dt-bindings: reset: npcm: Add support for NPCM8XXTomer Maimon
Add binding document and device tree binding constants for Nuvoton BMC NPCM8XX reset controller. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-19reset: npcm: using syscon instead of device dataTomer Maimon
Using syscon device tree property instead of device data to handle the NPCM general control registers. In case the syscon not found the code still search for nuvoton,npcm750-gcr to support DTS backward compatibility. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-19ARM: dts: nuvoton: add reset syscon propertyTomer Maimon
Add nuvoton,sysgcr syscon property to the reset node to handle the general control registers. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-19dt-bindings: reset: npcm: add GCR syscon propertyTomer Maimon
Describe syscon property that handles general control registers (GCR) in Nuvoton BMC NPCM reset driver. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-19dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX ClockTomer Maimon
Add binding for the Arbel BMC NPCM8XX Clock controller. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-19dt-bindings: watchdog: npcm: Add npcm845 compatible stringTomer Maimon
Add a compatible string for Nuvoton BMC NPCM845 watchdog. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-19dt-bindings: timer: npcm: Add npcm845 compatible stringTomer Maimon
Add a compatible string for Nuvoton BMC NPCM845 timer. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-19Merge tag 'mvebu-dt64-5.20-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt64 for 5.20 (part 1) Add support for Marvell 98DX2530 (and variants) * tag 'mvebu-dt64-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: marvell: enable the 98DX2530 pinctrl driver arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board dt-bindings: marvell: Document the AC5/AC5X compatibles Link: https://lore.kernel.org/r/87cze1qlg3.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-19tools headers UAPI: Sync linux/kvm.h with the kernel sourcesPaolo Bonzini
Silence this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-19arm64: marvell: enable the 98DX2530 pinctrl driverChris Packham
This commit makes sure the drivers for the 98DX2530 pin controller is enabled. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-07-19arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X boardChris Packham
The 98DX2530 SoC is the Control and Management CPU integrated into the Marvell 98DX25xx and 98DX35xx series of switch chip (internally referred to as AlleyCat5 and AlleyCat5X). These files have been taken from the Marvell SDK and lightly cleaned up with the License and copyright retained. gregory.clement: use specific cpu type: cortex-a55 instead of armv8 in cpu nodes, armv8 being reserved for the arm virtual models that are not meant to implement a particular CPU type. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2022-07-19Merge tag 'mvebu-dt-5.20-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt for 5.20 (part 1) Enable LED to link/activity on turris-omnia (Armada 385 based) * tag 'mvebu-dt-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: turris-omnia: enable LED controller node ARM: dts: turris-omnia: configure LED[0] pin function to link/activity Link: https://lore.kernel.org/r/87lespqn28.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-19Merge tag 'mvebu-arm-5.20-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/soc mvebu arm for 5.20 (part 1) Update PCIe fixup for old Marvell SoCs: dove, orion5 and mv78xx0. * tag 'mvebu-arm-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: Marvell: Update PCIe fixup Link: https://lore.kernel.org/r/87ilntqn0v.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-19KVM: selftests: Fix target thread to be migrated in rseq_testGavin Shan
In rseq_test, there are two threads, which are vCPU thread and migration worker separately. Unfortunately, the test has the wrong PID passed to sched_setaffinity() in the migration worker. It forces migration on the migration worker because zeroed PID represents the calling thread, which is the migration worker itself. It means the vCPU thread is never enforced to migration and it can migrate at any time, which eventually leads to failure as the following logs show. host# uname -r 5.19.0-rc6-gavin+ host# # cat /proc/cpuinfo | grep processor | tail -n 1 processor : 223 host# pwd /home/gavin/sandbox/linux.main/tools/testing/selftests/kvm host# for i in `seq 1 100`; do \ echo "--------> $i"; ./rseq_test; done --------> 1 --------> 2 --------> 3 --------> 4 --------> 5 --------> 6 ==== Test Assertion Failure ==== rseq_test.c:265: rseq_cpu == cpu pid=3925 tid=3925 errno=4 - Interrupted system call 1 0x0000000000401963: main at rseq_test.c:265 (discriminator 2) 2 0x0000ffffb044affb: ?? ??:0 3 0x0000ffffb044b0c7: ?? ??:0 4 0x0000000000401a6f: _start at ??:? rseq CPU = 4, sched CPU = 27 Fix the issue by passing correct parameter, TID of the vCPU thread, to sched_setaffinity() in the migration worker. Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs") Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Message-Id: <20220719020830.3479482-1-gshan@redhat.com> Reviewed-by: Andrew Jones <andrew.jones@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-19KVM: stats: Fix value for KVM_STATS_UNIT_MAX for boolean statsOliver Upton
commit 1b870fa5573e ("kvm: stats: tell userspace which values are boolean") added a new stat unit (boolean) but failed to raise KVM_STATS_UNIT_MAX. Fix by pointing UNIT_MAX at the new max value of UNIT_BOOLEAN. Fixes: 1b870fa5573e ("kvm: stats: tell userspace which values are boolean") Reported-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Signed-off-by: Oliver Upton <oupton@google.com> Message-Id: <20220719125229.2934273-1-oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-19Merge branch irq/renesas-irqc into irq/irqchip-nextMarc Zyngier
* irq/renesas-irqc: : . : New Renesas RZ/G2L IRQC driver from Lad Prabhakar, equipped with : its companion GPIO driver. : . dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC gpio: thunderx: Don't directly include asm-generic/msi.h pinctrl: renesas: pinctrl-rzg2l: Add IRQ domain to handle GPIO interrupt dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Document the properties to handle GPIO IRQ gpio: gpiolib: Allow free() callback to be overridden irqchip: Add RZ/G2L IA55 Interrupt Controller driver dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt Controller gpio: Remove dynamic allocation from populate_parent_alloc_arg() Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-07-19irqchip/gic-v3: Fix comment typoJason Wang
The double `the' is duplicated in line 1786, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220715051258.28889-1-wangborong@cdjrlc.com
2022-07-19dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoCLad Prabhakar
Document RZ/V2L (R9A07G054) IRQC bindings. The RZ/V2L IRQC block is identical to one found on the RZ/G2L SoC. No driver changes are required as generic compatible string "renesas,rzg2l-irqc" will be used as a fallback. While at it, update the comment "# RZ/G2L" to "# RZ/G2{L,LC}" for "renesas,r9a07g044-irqc" compatible string as both RZ/G2L and RZ/G2LC SoC's use the common SoC DTSI and have the same IRQC block. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220718193745.7472-1-prabhakar.mahadev-lad.rj@bp.renesas.com
2022-07-19Merge branch 'amt-fix-validation-and-synchronization-bugs'Paolo Abeni
Taehee Yoo says: ==================== amt: fix validation and synchronization bugs There are some synchronization issues in the amt module. Especially, an amt gateway doesn't well synchronize its own variables and status(amt->status). It tries to use a workqueue for handles in a single thread. A global lock is also good, but it would occur complex locking complex. In this patchset, only the gateway uses workqueue. The reason why only gateway interface uses workqueue is that gateway should manage its own states and variables a little bit statefully. But relay doesn't need to manage tunnels statefully, stateless is okay. So, relay side message handlers are okay to be called concurrently. But it doesn't mean that no lock is needed. Only amt multicast data message type will not be processed by the work queue because It contains actual multicast data. So, it should be processed immediately. When any amt gateway events are triggered(sending discovery message by delayed_work, sending request message by delayed_work and receiving messages), it stores event and skb into the event queue(amt->events[16]). Then, workqueue processes these events one by one. The first patch is to use the work queue. The second patch is to remove unnecessary lock due to a previous patch. The third patch is to use READ_ONCE() in the amt module. Even if the amt module uses a single thread, some variables (ready4, ready6, amt->status) can be accessed concurrently. The fourth patch is to add missing nonce generation logic when it sends a new request message. The fifth patch is to drop unexpected advertisement messages. advertisement message should be received only after the gateway sends a discovery message first. So, the gateway should drop advertisement messages if it has never sent a discovery message and it also should drop duplicate advertisement messages. Using nonce is good to distinguish whether a received message is an expected message or not. The sixth patch is to drop unexpected query messages. This is the same behavior as the fourth patch. Query messages should be received only after the gateway sends a request message first. The nonce variable is used to distinguish whether it is a reply to a previous request message or not. amt->ready4 and amt->ready6 are used to distinguish duplicate messages. The seventh patch is to drop unexpected multicast data. AMT gateway should not receive multicast data message type before establish between gateway and relay. In order to drop unexpected multicast data messages, it checks amt->status. The last patch is to fix a locking problem on the relay side. amt->nr_tunnels variable is protected by amt->lock. But amt_request_handler() doesn't protect this variable. v2: - Use local_bh_disable() instead of rcu_read_lock_bh() in amt_membership_query_handler. - Fix using uninitialized variables. - Fix unexpectedly start the event_wq after stopping. - Fix possible deadlock in amt_event_work(). - Add a limit variable in amt_event_work() to prevent infinite working. - Rename amt_queue_events() to amt_queue_event(). ==================== Link: https://lore.kernel.org/r/20220717160910.19156-1-ap420073@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19amt: do not use amt->nr_tunnels outside of lockTaehee Yoo
amt->nr_tunnels is protected by amt->lock. But, amt_request_handler() has been using this variable without the amt->lock. So, it expands context of amt->lock in the amt_request_handler() to protect amt->nr_tunnels variable. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19amt: drop unexpected multicast dataTaehee Yoo
AMT gateway interface should not receive unexpected multicast data. Multicast data message type should be received after sending an update message, which means all establishment between gateway and relay is finished. So, amt_multicast_data_handler() checks amt->status. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19amt: drop unexpected query messageTaehee Yoo
AMT gateway interface should not receive unexpected query messages. In order to drop unexpected query messages, it checks nonce. And it also checks ready4 and ready6 variables to drop duplicated messages. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19amt: drop unexpected advertisement messageTaehee Yoo
AMT gateway interface should not receive unexpected advertisement messages. In order to drop these packets, it should check nonce and amt->status. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19amt: add missing regeneration nonce logic in request logicTaehee Yoo
When AMT gateway starts sending a new request message, it should regenerate the nonce variable. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19amt: use READ_ONCE() in amt moduleTaehee Yoo
There are some data races in the amt module. amt->ready4, amt->ready6, and amt->status can be accessed concurrently without locks. So, it uses READ_ONCE() and WRITE_ONCE(). Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19amt: remove unnecessary locksTaehee Yoo
By the previous patch, amt gateway handlers are changed to worked by a single thread. So, most locks for gateway are not needed. So, it removes. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19amt: use workqueue for gateway side message handlingTaehee Yoo
There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19net: dsa: vitesse-vsc73xx: silent spi_device_id warningsOleksij Rempel
Add spi_device_id entries to silent SPI warnings. Fixes: 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220717135831.2492844-2-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19net: dsa: sja1105: silent spi_device_id warningsOleksij Rempel
Add spi_device_id entries to silent following warnings: SPI driver sja1105 has no spi_device_id for nxp,sja1105e SPI driver sja1105 has no spi_device_id for nxp,sja1105t SPI driver sja1105 has no spi_device_id for nxp,sja1105p SPI driver sja1105 has no spi_device_id for nxp,sja1105q SPI driver sja1105 has no spi_device_id for nxp,sja1105r SPI driver sja1105 has no spi_device_id for nxp,sja1105s SPI driver sja1105 has no spi_device_id for nxp,sja1110a SPI driver sja1105 has no spi_device_id for nxp,sja1110b SPI driver sja1105 has no spi_device_id for nxp,sja1110c SPI driver sja1105 has no spi_device_id for nxp,sja1110d Fixes: 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220717135831.2492844-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19be2net: Fix buffer overflow in be_get_module_eepromHristo Venev
be_cmd_read_port_transceiver_data assumes that it is given a buffer that is at least PAGE_DATA_LEN long, or twice that if the module supports SFF 8472. However, this is not always the case. Fix this by passing the desired offset and length to be_cmd_read_port_transceiver_data so that we only copy the bytes once. Fixes: e36edd9d26cf ("be2net: add ethtool "-m" option support") Signed-off-by: Hristo Venev <hristo@venev.name> Link: https://lore.kernel.org/r/20220716085134.6095-1-hristo@venev.name Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19gpio: pca953x: use the correct register address when regcache sync during initHaibo Chen
For regcache_sync_region, we need to use pca953x_recalc_addr() to get the real register address. Fixes: ec82d1eba346 ("gpio: pca953x: Zap ad-hoc reg_output cache") Fixes: 0f25fda840a9 ("gpio: pca953x: Zap ad-hoc reg_direction cache") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: pca953x: use the correct range when do regmap syncHaibo Chen
regmap will sync a range of registers, here use the correct range to make sure the sync do not touch other unexpected registers. Find on pca9557pw on imx8qxp/dxl evk board, this device support 8 pin, so only need one register(8 bits) to cover all the 8 pins's property setting. But when sync the output, we find it actually update two registers, output register and the following register. Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle") Fixes: ec82d1eba346 ("gpio: pca953x: Zap ad-hoc reg_output cache") Fixes: 0f25fda840a9 ("gpio: pca953x: Zap ad-hoc reg_direction cache") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19gpio: pca953x: only use single read/write for No AI modeHaibo Chen
For the device use NO AI mode(not support auto address increment), only use the single read/write when config the regmap. We meet issue on PCA9557PW on i.MX8QXP/DXL evk board, this device do not support AI mode, but when do the regmap sync, regmap will sync 3 byte data to register 1, logically this means write first data to register 1, write second data to register 2, write third data to register 3. But this device do not support AI mode, finally, these three data write only into register 1 one by one. the reault is the value of register 1 alway equal to the latest data, here is the third data, no operation happened on register 2 and register 3. This is not what we expect. Fixes: 49427232764d ("gpio: pca953x: Perform basic regmap conversion") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19clk: lan966x: Fix the lan966x clock gate register addressHerve Codina
The register address used for the clock gate register is the base register address coming from first reg map (ie. the generic clock registers) instead of the second reg map defining the clock gate register. Use the correct clock gate register address. Fixes: 5ad5915dea00 ("clk: lan966x: Extend lan966x clock driver for clock gating support") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20220704102845.168438-2-herve.codina@bootlin.com Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-07-18arm64: dts: qcom: sdm845-db845c: Specify a i2c bus clocksBjorn Andersson
The kernel log contains complaints about i2c11 and i2c14 lacking clock-frequency, specify a reasonable value to suppress this warning. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220717034403.2135027-4-bjorn.andersson@linaro.org
2022-07-18arm64: dts: qcom: sdm845-db845c: Enable gpi_dma1Bjorn Andersson
Enable gpi_dma1 so that i2c14 is able to find its DMA controller. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220717034403.2135027-3-bjorn.andersson@linaro.org
2022-07-18arm64: dts: qcom: sdm845: Fill in GENI DMA referencesBjorn Andersson
The I2C and SPI might be configured in GPI DMA mode, fill in the properties needed for this. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220717034403.2135027-2-bjorn.andersson@linaro.org
2022-07-18net: stmmac: remove redunctant disable xPCS EEE callWong Vee Khee
Disable is done in stmmac_init_eee() on the event of MAC link down. Since setting enable/disable EEE via ethtool will eventually trigger a MAC down, removing this redunctant call in stmmac_ethtool.c to avoid calling xpcs_config_eee() twice. Fixes: d4aeaed80b0e ("net: stmmac: trigger PCS EEE to turn off on link down") Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Link: https://lore.kernel.org/r/20220715122402.1017470-1-vee.khee.wong@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18Merge branch 'fix-2-dsa-issues-with-vlan_filtering_is_global'Jakub Kicinski
Vladimir Oltean says: ==================== Fix 2 DSA issues with vlan_filtering_is_global This patch set fixes 2 issues with vlan_filtering_is_global switches. Both are regressions introduced by refactoring commit d0004a020bb5 ("net: dsa: remove the "dsa_to_port in a loop" antipattern from the core"), which wasn't tested on a wide enough variety of switches. Tested on the sja1105 driver. ==================== Link: https://lore.kernel.org/r/20220715151659.780544-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18net: dsa: fix NULL pointer dereference in dsa_port_reset_vlan_filteringVladimir Oltean
The "ds" iterator variable used in dsa_port_reset_vlan_filtering() -> dsa_switch_for_each_port() overwrites the "dp" received as argument, which is later used to call dsa_port_vlan_filtering() proper. As a result, switches which do enter that code path (the ones with vlan_filtering_is_global=true) will dereference an invalid dp in dsa_port_reset_vlan_filtering() after leaving a VLAN-aware bridge. Use a dedicated "other_dp" iterator variable to avoid this from happening. Fixes: d0004a020bb5 ("net: dsa: remove the "dsa_to_port in a loop" antipattern from the core") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18net: dsa: fix dsa_port_vlan_filtering when globalVladimir Oltean
The blamed refactoring commit changed a "port" iterator with "other_dp", but still looked at the slave_dev of the dp outside the loop, instead of other_dp->slave from the loop. As a result, dsa_port_vlan_filtering() would not call dsa_slave_manage_vlan_filtering() except for the port in cause, and not for all switch ports as expected. Fixes: d0004a020bb5 ("net: dsa: remove the "dsa_to_port in a loop" antipattern from the core") Reported-by: Lucian Banu <Lucian.Banu@westermo.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18ixgbe: Add locking to prevent panic when setting sriov_numvfs to zeroPiotr Skajewski
It is possible to disable VFs while the PF driver is processing requests from the VF driver. This can result in a panic. BUG: unable to handle kernel paging request at 000000000000106c PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 8 PID: 0 Comm: swapper/8 Kdump: loaded Tainted: G I --------- - Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020 RIP: 0010:ixgbe_msg_task+0x4c8/0x1690 [ixgbe] Code: 00 00 48 8d 04 40 48 c1 e0 05 89 7c 24 24 89 fd 48 89 44 24 10 83 ff 01 0f 84 b8 04 00 00 4c 8b 64 24 10 4d 03 a5 48 22 00 00 <41> 80 7c 24 4c 00 0f 84 8a 03 00 00 0f b7 c7 83 f8 08 0f 84 8f 0a RSP: 0018:ffffb337869f8df8 EFLAGS: 00010002 RAX: 0000000000001020 RBX: 0000000000000000 RCX: 000000000000002b RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000006 RBP: 0000000000000006 R08: 0000000000000002 R09: 0000000000029780 R10: 00006957d8f42832 R11: 0000000000000000 R12: 0000000000001020 R13: ffff8a00e8978ac0 R14: 000000000000002b R15: ffff8a00e8979c80 FS: 0000000000000000(0000) GS:ffff8a07dfd00000(0000) knlGS:00000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000106c CR3: 0000000063e10004 CR4: 00000000007726e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? ttwu_do_wakeup+0x19/0x140 ? try_to_wake_up+0x1cd/0x550 ? ixgbevf_update_xcast_mode+0x71/0xc0 [ixgbevf] ixgbe_msix_other+0x17e/0x310 [ixgbe] __handle_irq_event_percpu+0x40/0x180 handle_irq_event_percpu+0x30/0x80 handle_irq_event+0x36/0x53 handle_edge_irq+0x82/0x190 handle_irq+0x1c/0x30 do_IRQ+0x49/0xd0 common_interrupt+0xf/0xf This can be eventually be reproduced with the following script: while : do echo 63 > /sys/class/net/<devname>/device/sriov_numvfs sleep 1 echo 0 > /sys/class/net/<devname>/device/sriov_numvfs sleep 1 done Add lock when disabling SR-IOV to prevent process VF mailbox communication. Fixes: d773d1310625 ("ixgbe: Fix memory leak when SR-IOV VFs are direct assigned") Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220715214456.2968711-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18i40e: Fix erroneous adapter reinitialization during recovery processDawid Lukwinski
Fix an issue when driver incorrectly detects state of recovery process and erroneously reinitializes interrupts, which results in a kernel error and call trace message. The issue was caused by a combination of two factors: 1. Assuming the EMP reset issued after completing firmware recovery means the whole recovery process is complete. 2. Erroneous reinitialization of interrupt vector after detecting the above mentioned EMP reset. Fixes (1) by changing how recovery state change is detected and (2) by adjusting the conditional expression to ensure using proper interrupt reinitialization method, depending on the situation. Fixes: 4ff0ee1af016 ("i40e: Introduce recovery mode support") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220715214542.2968762-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18net: ethernet: mtk_eth_soc: fix off by one check of ARRAY_SIZETom Rix
In mtk_wed_tx_ring_setup(.., int idx, ..), idx is used as an index here struct mtk_wed_ring *ring = &dev->tx_ring[idx]; The bounds of idx are checked here BUG_ON(idx > ARRAY_SIZE(dev->tx_ring)); If idx is the size of the array, it will pass this check and overflow. So change the check to >= . Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)") Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220716214654.1540240-1-trix@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-17 06:22:50 +0000