| Age | Commit message (Collapse) | Author |
|---|
|
Some platform devices create child devices dynamically and require the
parent device's msi-map to map device IDs to actual sideband information.
A typical use case is using ITS as a PCIe Endpoint Controller(EPC)'s
doorbell function, where PCI hosts send TLP memory writes to the EP
controller. The EP controller converts these writes to AXI transactions
and appends platform-specific sideband information.
EPC's DTS will provide such information by msi-map and msi-mask. A
simplified dts as
pcie-ep@10000000 {
...
msi-map = <0 &its 0xc 8>;
^^^ 0xc is implement defined sideband information,
which append to AXI write transaction.
^ 0 is function index.
msi-mask = <0x7>
}
Check msi-map if msi-parent missed to keep compatility with existing systems.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250414-ep-msi-v18-5-f69b49917464@nxp.com
|
|
Document the use of (msi|iommu)-map for PCI Endpoint (EP) controllers,
which can use MSI as a doorbell mechanism. Each EP controller can support
up to 8 physical functions and 65,536 virtual functions.
Define how to construct device IDs using function bits [2:0] and virtual
function index bits [31:3], enabling (msi|iommu)-map to associate each
child device with a specific (msi|iommu)-specifier.
The EP cannot rely on PCI Requester ID (RID) because the RID is determined
by the PCI topology of the host system. Since the EP may be connected to
different PCI hosts, the RID can vary between systems and is therefore not
a reliable identifier.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/all/20250414-ep-msi-v18-4-f69b49917464@nxp.com
|
|
Set the IRQ_DOMAIN_FLAG_MSI_IMMUTABLE flag for ITS, as it does not change
the address/data pair after setup.
Ensure compatibility with MSI users, such as PCIe Endpoint Doorbell, which
require the address/data pair to remain unchanged. Enable PCIe endpoints to
use ITS for triggering doorbells from the PCIe Root Complex (RC) side.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250414-ep-msi-v18-3-f69b49917464@nxp.com
|
|
Add the flag IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and the API function
irq_domain_is_msi_immutable() to check if the MSI controller retains an
immutable address/data pair during irq_set_affinity().
Ensure compatibility with MSI users like PCIe Endpoint Doorbell, which
require the address/data pair to remain unchanged after setup. Use this
function to verify if the MSI controller is immutable.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250414-ep-msi-v18-2-f69b49917464@nxp.com
|
|
platform_device_msi_free_irqs_all()
platform_device_msi_init_and_alloc_irqs() performs two tasks: allocating
the MSI domain for a platform device, and allocate a number of MSIs in that
domain.
platform_device_msi_free_irqs_all() only frees the MSIs, and leaves the MSI
domain alive.
Given that platform_device_msi_init_and_alloc_irqs() is the sole tool a
platform device has to allocate platform MSIs, it makes sense for
platform_device_msi_free_irqs_all() to teardown the MSI domain at the same
time as the MSIs.
This avoids warnings and unexpected behaviours when a driver repeatedly
allocates and frees MSIs.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250414-ep-msi-v18-1-f69b49917464@nxp.com
|
|
This code pattern trips clang up:
if (fail)
goto undo;
guard(lock)(lock);
do_stuff();
return 0;
undo:
...
as it somehow extends the scope of the guard beyond the return statement.
Replace it with a scoped guard to help it to get its act together.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Closes: https://lore.kernel.org/oe-kbuild-all/202505071809.ajpPxfoZ-lkp@intel.com/
|
|
Marek reported seeing a NULL pointer fault in the xenbus_thread
callstack:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: e030:__wake_up_common+0x4c/0x180
Call Trace:
<TASK>
__wake_up_common_lock+0x82/0xd0
process_msg+0x18e/0x2f0
xenbus_thread+0x165/0x1c0
process_msg+0x18e is req->cb(req). req->cb is set to xs_wake_up(), a
thin wrapper around wake_up(), or xenbus_dev_queue_reply(). It seems
like it was xs_wake_up() in this case.
It seems like req may have woken up the xs_wait_for_reply(), which
kfree()ed the req. When xenbus_thread resumes, it faults on the zero-ed
data.
Linux Device Drivers 2nd edition states:
"Normally, a wake_up call can cause an immediate reschedule to happen,
meaning that other processes might run before wake_up returns."
... which would match the behaviour observed.
Change to keeping two krefs on each request. One for the caller, and
one for xenbus_thread. Each will kref_put() when finished, and the last
will free it.
This use of kref matches the description in
Documentation/core-api/kref.rst
Link: https://lore.kernel.org/xen-devel/ZO0WrR5J0xuwDIxW@mail-itl/
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Fixes: fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250506210935.5607-1-jason.andryuk@amd.com>
|
|
Make xenbus_init() allow a non-local xenstore for a PVH dom0 - it is
currently forced to XS_LOCAL. With Hyperlaunch booting dom0 and a
xenstore stubdom, dom0 can be handled as a regular XS_HVM following the
late init path.
Ideally we'd drop the use of xen_initial_domain() and just check for the
event channel instead. However, ARM has a xen,enhanced no-xenstore
mode, where the event channel and PFN would both be 0. Retain the
xen_initial_domain() check, and use that for an additional check when
the event channel is 0.
Check the full 64bit HVM_PARAM_STORE_EVTCHN value to catch the off
chance that high bits are set for the 32bit event channel.
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Change-Id: I5506da42e4c6b8e85079fefb2f193c8de17c7437
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250506204456.5220-1-jason.andryuk@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Some Kconfig dependency fixes"
* tag 'media/v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: cec: tda9950: add back i2c dependency
media: i2c: lt6911uxe: add two selects to Kconfig
media: platform: synopsys: VIDEO_SYNOPSYS_HDMIRX should depend on ARCH_ROCKCHIP
media: i2c: lt6911uxe: Fix Kconfig dependencies:
media: vivid: fix FB dependency
|
|
AIO needs to initialize .ki_write_stream explicitly for read/write request,
otherwise random .ki_write_stream is used, and cause -EINVAL returned for
aio write randomly.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Kanchan Joshi <joshi.k@samsung.com>
Fixes: c27683da6406 ("block: expose write streams for block device nodes")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250507133328.3040255-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Multishot normally uses io_req_post_cqe() to post completions, but when
stopping it, it may finish up with a deferred completion. This is fine,
except if another multishot event triggers before the deferred completions
get flushed. If this occurs, then CQEs may get reordered in the CQ ring,
as new multishot completions get posted before the deferred ones are
flushed. This can cause confusion on the application side, if strict
ordering is required for the use case.
When multishot posting via io_req_post_cqe(), flush any pending deferred
completions first, if any.
Cc: stable@vger.kernel.org # 6.1+
Reported-by: Norman Maurer <norman_maurer@apple.com>
Reported-by: Christian Mazakas <christian.mazakas@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Split out from combo patch to avoid merge conflicts ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-22-jirislaby@kernel.org
|
|
Replace the code building a bio from a kernel direct map address and
submitting it synchronously with the bdev_rw_virt helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace the code building a bio from a kernel direct map address and
submitting it synchronously with the bdev_rw_virt helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the bio_add_virt_nofail and bio_add_vmalloc helpers to abstract
away the details of the memory allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20250507120451.4000627-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Delegate to bdev_rw_virt when operating on non-vmalloc memory and use
bio_add_vmalloc_chunk to insulate xfs from the details of adding vmalloc
memory to a bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20250507120451.4000627-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert the __bio_add_page(..., virt_to_page(), ...) pattern to the
bio_add_virt_nofail helper implementing it and use bio_add_vmalloc
to insulate xfs from the details of adding vmalloc memory to a bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250507120451.4000627-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert the __bio_add_page(..., virt_to_page(), ...) pattern to the
bio_add_virt_nofail helper implementing it, and do the same for the
similar pattern using bio_add_page for adding the first segment after
a bio allocation as that can't fail either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert the __bio_add_page(..., virt_to_page(), ...) pattern to the
bio_add_virt_nofail helper implementing it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split hib_submit_io into a sync and async version. The sync version is
a small wrapper around bdev_rw_virt which implements all the logic to
add a kernel direct mapping range to a bio and synchronously submits it,
while the async version is slightly simplified using the
bio_add_virt_nofail for adding the single range.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250507120451.4000627-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Switch zonefs_read_super to allocate the superblock buffer using kmalloc
which falls back to the page allocator for PAGE_SIZE allocation but
gives us a kernel virtual address and then use bdev_rw_virt to perform
the synchronous read into it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Switch gfs2_read_super to allocate the superblock buffer using kmalloc
which falls back to the page allocator for PAGE_SIZE allocation but
gives us a kernel virtual address and then use bdev_rw_virt to perform
the synchronous read into it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250507120451.4000627-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the bio_add_virt_nofail to add a single kernel virtual address
to a bio as that can't fail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert the __bio_add_page(..., virt_to_page(), ...) pattern to the
bio_add_virt_nofail helper implementing it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Coly Li <colyli@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rewrite bio_map_kern using the new bio_add_* helpers and drop the
kerneldoc comment that is superfluous for an internal helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
That way the bio can be allocated with the right operation already
set and there is no need to pass the separated 'reading' argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove the q argument from blk_rq_map_kern and the internal helpers
called by it as the queue can trivially be derived from the request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper to add a vmalloc region to a bio, abstracting away the
vmalloc addresses from the underlying pages and another one wrapping
it for the simple case where all data fits into a single bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper to check how many bio_vecs are needed to add a kernel
virtual address range to a bio, accounting for the always contiguous
direct mapping and vmalloc mappings that usually need a bio_vec
per page sized chunk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper to perform synchronous I/O on a kernel direct map range.
Currently this is implemented in various places in usually not very
efficient ways, so provide a generic helper instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper to add a directly mapped kernel virtual address to a
bio so that callers don't have to convert to pages or folios.
For now only the _nofail variant is provided as that is what all the
obvious callers want.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Xen swiotlb support was missed when the patch set starting with
4ab5f8ec7d71 ("mm/slab: decouple ARCH_KMALLOC_MINALIGN from
ARCH_DMA_MINALIGN") was merged.
When running Xen on iMX8QXP, a SoC without IOMMU, the effect was that USB
transfers ended up corrupted when there was more than one URB inflight at
the same time.
Add a call to dma_kmalloc_needs_bounce() to make sure that allocations too
small for DMA get bounced via swiotlb.
Closes: https://lore.kernel.org/linux-usb/ab2776f0-b838-4cf6-a12a-c208eb6aad59@actia.se/
Fixes: 4ab5f8ec7d71 ("mm/slab: decouple ARCH_KMALLOC_MINALIGN from ARCH_DMA_MINALIGN")
Cc: stable@kernel.org # v6.5+
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250502114043.1968976-2-john.ernberg@actia.se>
|
|
The wlan_ctrl_by_user detection was introduced by commit a50bd128f28c
("asus-wmi: record wlan status while controlled by userapp").
Quoting from that commit's commit message:
"""
When you call WMIMethod(DSTS, 0x00010011) to get WLAN status, it may return
(1) 0x00050001 (On)
(2) 0x00050000 (Off)
(3) 0x00030001 (On)
(4) 0x00030000 (Off)
(5) 0x00000002 (Unknown)
(1), (2) means that the model has hardware GPIO for WLAN, you can call
WMIMethod(DEVS, 0x00010011, 1 or 0) to turn WLAN on/off.
(3), (4) means that the model doesn’t have hardware GPIO, you need to use
API or driver library to turn WLAN on/off, and call
WMIMethod(DEVS, 0x00010012, 1 or 0) to set WLAN LED status.
After you set WLAN LED status, you can see the WLAN status is changed with
WMIMethod(DSTS, 0x00010011). Because the status is recorded lastly
(ex: Windows), you can use it for synchronization.
(5) means that the model doesn’t have WLAN device.
WLAN is the ONLY special case with upper rule.
"""
The wlan_ctrl_by_user flag should be set on 0x0003000? ((3), (4) above)
return values, but the flag mistakenly also gets set on laptops with
0x0005000? ((1), (2)) return values. This is causing rfkill problems on
laptops where 0x0005000? is returned.
Fix the check to only set the wlan_ctrl_by_user flag for 0x0003000?
return values.
Fixes: a50bd128f28c ("asus-wmi: record wlan status while controlled by userapp")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219786
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250501131702.103360-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
(GX4HRXL)
MECHREVO Wujie 14XA (GX4HRXL) wakes up immediately after s2idle entry.
This happens regardless of whether the laptop is plugged into AC power,
or whether any peripheral is plugged into the laptop.
Similar to commit a55bdad5dfd1 ("platform/x86/amd/pmc: Disable keyboard
wakeup on AMD Framework 13"), the MECHREVO Wujie 14XA wakes up almost
instantly after s2idle suspend entry (IRQ1 is the keyboard):
2025-04-18 17:23:57,588 DEBUG: PM: Triggering wakeup from IRQ 9
2025-04-18 17:23:57,588 DEBUG: PM: Triggering wakeup from IRQ 1
Add this model to the spurious_8042 quirk to workaround this.
This patch does not affect the wake-up function of the built-in keyboard.
Because the firmware of this machine adds an insurance for keyboard
wake-up events, as it always triggers an additional IRQ 9 to wake up the
system.
Suggested-by: Mingcong Bai <jeffbai@aosc.io>
Suggested-by: Xinhui Yang <cyan@cyano.uk>
Suggested-by: Rong Zhang <i@rong.moe>
Fixes: a55bdad5dfd1 ("platform/x86/amd/pmc: Disable keyboard wakeup on AMD Framework 13")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4166
Cc: Mario Limonciello <mario.limonciello@amd.com>
Link: https://zhuanldan.zhihu.com/p/730538041
Tested-by: Yemu Lu <prcups@krgm.moe>
Signed-off-by: Runhua He <hua@aosc.io>
Link: https://lore.kernel.org/r/20250507100103.995395-1-hua@aosc.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Change get_thinkpad_model_data() to check for additional vendor name
"NEC" in order to support NEC Lavie X1475JAS notebook (and perhaps
more).
The reason of this works with minimal changes is because NEC Lavie
X1475JAS is a Thinkpad inside. ACPI dumps reveals its OEM ID to be
"LENOVO", BIOS version "R2PET30W" matches typical Lenovo BIOS version,
the existence of HKEY of LEN0268, with DMI fw string is "R2PHT24W".
I compiled and tested with my own machine, attached the dmesg
below as proof of work:
[ 6.288932] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 6.288937] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 6.288938] thinkpad_acpi: ThinkPad BIOS R2PET30W (1.11 ), EC R2PHT24W
[ 6.307000] thinkpad_acpi: radio switch found; radios are enabled
[ 6.307030] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 6.307033] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 6.320322] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 6.371963] thinkpad_acpi: secondary fan control detected & enabled
[ 6.391922] thinkpad_acpi: battery 1 registered (start 0, stop 85, behaviours: 0x7)
[ 6.398375] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input13
Signed-off-by: John Chau <johnchau@0atlas.com>
Link: https://lore.kernel.org/r/20250504165513.295135-1-johnchau@0atlas.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Fix the following warning when running 'make htmldocs':
+WARNING: include/linux/blk-mq.h:532 struct member 'update_nr_hwq_lock' not described in 'blk_mq_tag_set'
Fixes: 98e68f67020c ("block: prevent adding/deleting disk during updating nr_hw_queues")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20250507163220.00141d77@canb.auug.org.au/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250507092537.3009112-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With commit bcb5d6c76903 ("s390/pci: introduce lock to synchronize state
of zpci_dev's") the code to ignore power off of a PF that has child VFs
was changed from a direct return to a goto to the unlock and
pci_dev_put() section. The change however left the existing pci_dev_put()
untouched resulting in a doubple put. This can subsequently cause a use
after free if the struct pci_dev is released in an unexpected state.
Fix this by removing the extra pci_dev_put().
Cc: stable@vger.kernel.org
Fixes: bcb5d6c76903 ("s390/pci: introduce lock to synchronize state of zpci_dev's")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The zpci_create_device() function returns an error pointer that needs to
be checked before dereferencing it as a struct zpci_dev pointer. Add the
missing check in __clp_add() where it was missed when adding the
scan_list in the fixed commit. Simply not adding the device to the scan
list results in the previous behavior.
Cc: stable@vger.kernel.org
Fixes: 0467cdde8c43 ("s390/pci: Sort PCI functions prior to creating virtual busses")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
UDF maintains total length of all extents in i_lenExtents. Generally we
keep extent lengths (and thus i_lenExtents) block aligned because it
makes the file appending logic simpler. However the standard mandates
that the inode size must match the length of all extents and thus we
trim the last extent when closing the file. To catch possible bugs we
also verify that i_lenExtents matches i_size when evicting inode from
memory. Commit b405c1e58b73 ("udf: refactor udf_next_aext() to handle
error") however broke the code updating i_lenExtents and thus
udf_evict_inode() ended up spewing lots of errors about incorrectly
sized extents although the extents were actually sized properly. Fix the
updating of i_lenExtents to silence the errors.
Fixes: b405c1e58b73 ("udf: refactor udf_next_aext() to handle error")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
remove_percpu_irq() has been unused since it was added in 2011 by
commit 31d9d9b6d830 ("genirq: Add support for per-cpu dev_id interrupts")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250420164656.112641-1-linux@treblig.org
|
|
Reorder some introduced include headers to keep alphabetical order.
Fixes: 7ace1602abf2 ("LoongArch: entry: Migrate ret_from_fork() to C")
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507-loongarch_include_order-v1-1-e8aada6a3da8@rivosinc.com
|
|
Include linux/types.h before using bool.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505070045.vWc04ygs-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
I found this simple bug while preparing some patches for pKVM.
AFAICT, it should be harmless (besides crashing the kernel if it
was misbehaving)
Fixes: e94a7dea2972 ("KVM: arm64: Move host page ownership tracking to the hyp vmemmap")
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20250501162450.2784043-1-smostafa@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
HCRX_HOST_FLAGS, like most of these hardcoded setups, are not
a good match for options that can be selectively enabled or
disabled.
Nothing but the early setup is relying on it now, so kill the
macro and move the bag of bits where they belong.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250430105916.3815157-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Rather than restoring HCRX_EL2 to a fixed value on vcpu exit,
perform a full save/restore of the register, ensuring that
we don't lose bits that would have been set at some point in
the host kernel lifetime, such as the GCSEn bit.
Fixes: ff5181d8a2a82 ("arm64/gcs: Provide basic EL2 setup to allow GCS usage at EL0 and EL1")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250430105916.3815157-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
All users are converted to the guards. Remove the helpers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065422.729586582@linutronix.de
|
|
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065422.670808288@linutronix.de
|
|
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065422.612184618@linutronix.de
|
|
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065422.552884529@linutronix.de
|
|
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065422.494561120@linutronix.de
|
