| Age | Commit message (Collapse) | Author |
|---|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.12, please pull the following:
- Florian fixed the HDMI gpio pin which is connected to GPIO pin 0, not
1
* tag 'arm-soc/for-6.12/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2837-rpi-cm3-io3: Fix HDMI hpd-gpio pin
Link: https://lore.kernel.org/r/20241008220440.23182-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
FSL SOC fixes for v6.12:
- Fix a "cast to pointer from integer of different size" build error
due to IS_ERROR_VALUE() used with something which is not a pointer.
- Fix an unused data build warning.
* tag 'soc_fsl-6.12-3' of https://github.com/chleroy/linux:
soc: fsl: cpm1: qmc: Fix unused data compilation warning
soc: fsl: cpm1: qmc: Do not use IS_ERR_VALUE() on error pointers
Link: https://lore.kernel.org/r/c954bdb0-0c16-491a-8662-37e58f07208f@csgroup.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Patches for SoCs are expected to be picked up by SoC submaintainers.
The main SoC maintainers should be addressed only in few cases.
Rewrite the section about maintainer handling to document above
expectation.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Will Deacon <will@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Conor Dooley <conor@kernel.org>
Cc: Heiko Stübner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240925095635.30452-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ep93xx_dma.c: In function 'ep93xx_dma_of_probe':
ep93xx_dma.c:1409:74: warning: '%u' directive output may be truncated
writing between 1 and 8 bytes into a region
of size 2 [-Wformat-truncation=]
snprintf(dma_clk_name, sizeof(dma_clk_name), "m2p%u", i);
^~
Fixes: d7333f9d3377 ("dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409172024.pU8U5beA-lkp@intel.com/
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/2bf9c37aad8f085839f9c63104f7275742f51945.camel@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ep93xx_dma.c:1354:37: sparse: sparse: incorrect type in return expression
(different address spaces)
ep93xx_dma.c:1354:37: sparse: expected struct ep93xx_dma_engine *
ep93xx_dma.c:1354:37: sparse: got void [noderef] __iomem *regs
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409202250.fPlN2Erd-lkp@intel.com/
Fixes: 4e8ad5ed845b ("dmaengine: cirrus: Convert to DT for Cirrus EP93xx")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/d4b542f1d678796fbf094ebcc77295af3617bca0.camel@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The soc@kernel.org address started out as a mail alias, but at some
point became a mailing list. Use the canonical name of the list and
properly mark it as L: instead of M:.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add error check after retrieving PEQ filter values in
scarlett2_update_filter_values that ensure function returns error if
PEQ filter value retrieval fails.
Fixes: b64678eb4e70 ("ALSA: scarlett2: Add DSP controls")
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241009092305.8570-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If snd_hda_gen_add_kctl fails to allocate memory and returns NULL, then
NULL pointer dereference will occur in the next line.
Since dolphin_fixups function is a hda_fixup function which is not supposed
to return any errors, add simple check before dereference, ignore the fail.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 20e507724113 ("ALSA: hda/cs8409: Add support for dolphin")
Signed-off-by: Murad Masimov <m.masimov@maxima.ru>
Link: https://patch.msgid.link/20241010221649.1305-1-m.masimov@maxima.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Unlike EMR tools which encode type information in their tool ID, tools
for AES sensors are all "generic pens". It is inappropriate to make use
of the wacom_intuos_get_tool_type function when dealing with these kinds
of devices. Instead, we should only ever report BTN_TOOL_PEN or
BTN_TOOL_RUBBER, as depending on the state of the Eraser and Invert
bits.
Reported-by: Daniel Jutz <daniel@djutz.com>
Closes: https://lore.kernel.org/linux-input/3cd82004-c5b8-4f2a-9a3b-d88d855c65e4@heusel.eu/
Bisected-by: Christian Heusel <christian@heusel.eu>
Fixes: 9c2913b962da ("HID: wacom: more appropriate tool type categorization")
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1041
Link: https://github.com/linuxwacom/input-wacom/issues/440
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Cc: stable@vger.kernel.org
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
psi_dequeue() in for blocked task expects psi_sched_switch() to clear
the TSK_.*RUNNING PSI flags and set the TSK_IOWAIT flags however
psi_sched_switch() uses "!task_on_rq_queued(prev)" to detect if the task
is blocked or still runnable which is no longer true with DELAY_DEQUEUE
since a blocking task can be left queued on the runqueue.
This can lead to PSI splats similar to:
psi: inconsistent task state! task=... cpu=... psi_flags=4 clear=0 set=4
when the task is requeued since the TSK_RUNNING flag was not cleared
when the task was blocked.
Explicitly communicate that the task was blocked to psi_sched_switch()
even if it was delayed and is still on the runqueue.
[ prateek: Broke off the relevant part from [1], commit message ]
Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue")
Closes: https://lore.kernel.org/lkml/20240830123458.3557-1-spasswolf@web.de/
Closes: https://lore.kernel.org/all/cd67fbcd-d659-4822-bb90-7e8fbb40a856@molgen.mpg.de/
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Not-yet-signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/lkml/20241004123506.GR18071@noisy.programming.kicks-ass.net/ [1]
|
|
Commit 2e0199df252a ("sched/fair: Prepare exit/cleanup paths for delayed_dequeue")
and its follow up fixes try to deal with a rather unfortunate
situation where is task is enqueued in a new class, even though it
shouldn't have been. Mostly because the existing ->switched_to/from()
hooks are in the wrong place for this case.
This all led to Paul being able to trigger failures at something like
once per 10k CPU hours of RCU torture.
For now, do the ugly thing and move the code to the right place by
ignoring the switch hooks.
Note: Clean up the whole sched_class::switch*_{to,from}() thing.
Fixes: 2e0199df252a ("sched/fair: Prepare exit/cleanup paths for delayed_dequeue")
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241003185037.GA5594@noisy.programming.kicks-ass.net
|
|
With KASAN and PREEMPT_RT enabled, calling task_work_add() in
task_tick_mm_cid() may cause the following splat.
[ 63.696416] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 63.696416] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 610, name: modprobe
[ 63.696416] preempt_count: 10001, expected: 0
[ 63.696416] RCU nest depth: 1, expected: 1
This problem is caused by the following call trace.
sched_tick() [ acquire rq->__lock ]
-> task_tick_mm_cid()
-> task_work_add()
-> __kasan_record_aux_stack()
-> kasan_save_stack()
-> stack_depot_save_flags()
-> alloc_pages_mpol_noprof()
-> __alloc_pages_noprof()
-> get_page_from_freelist()
-> rmqueue()
-> rmqueue_pcplist()
-> __rmqueue_pcplist()
-> rmqueue_bulk()
-> rt_spin_lock()
The rq lock is a raw_spinlock_t. We can't sleep while holding
it. IOW, we can't call alloc_pages() in stack_depot_save_flags().
The task_tick_mm_cid() function with its task_work_add() call was
introduced by commit 223baf9d17f2 ("sched: Fix performance regression
introduced by mm_cid") in v6.4 kernel.
Fortunately, there is a kasan_record_aux_stack_noalloc() variant that
calls stack_depot_save_flags() while not allowing it to allocate
new pages. To allow task_tick_mm_cid() to use task_work without
page allocation, a new TWAF_NO_ALLOC flag is added to enable calling
kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack()
if set. The task_tick_mm_cid() function is modified to add this new flag.
The possible downside is the missing stack trace in a KASAN report due
to new page allocation required when task_work_add_noallloc() is called
which should be rare.
Fixes: 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241010014432.194742-1-longman@redhat.com
|
|
The deadline server code moved one of the start_hrtick_dl() calls
but dropped the dl specific hrtick_enabled check. This causes hrticks
to get armed even when sched_feat(HRTICK_DL) is false. Fix it.
Fixes: 63ba8422f876 ("sched/deadline: Introduce deadline servers")
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20241004123729.460668-1-pauld@redhat.com
|
|
Drop the unnecessary "_sys" infix from the suspend PM ops.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241009145110.16847-10-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Serial drivers should not be dropping characters themselves, but at
least drop the unused 'drop' parameter from the receive handler for now.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241009145110.16847-9-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop the unnecessary WARN() in case the TTY buffers are ever full in
favour of a rate limited dev_err() which doesn't kill the machine when
panic_on_warn is set.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241009145110.16847-8-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cancelling an rx command is signalled using bit 14 of the rx DMA status
register and not bit 11.
This bit is currently unused, but this error becomes apparent, for
example, when tracing the status register when closing the port.
Fixes: eddac5af0654 ("soc: qcom: Add GENI based QUP Wrapper driver")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241009145110.16847-7-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The receiver is supposed to be enabled in the startup() callback and not
in set_termios() which is called also during console setup.
This specifically avoids accepting input before the port has been opened
(and interrupts enabled), something which can also break the GENI
firmware (cancel fails and after abort, the "stale" counter handling
appears to be broken so that later input is not processed until twelve
chars have been received).
There also does not appear to be any need to keep the receiver disabled
while updating the port settings.
Since commit 6f3c3cafb115 ("serial: qcom-geni: disable interrupts during
console writes") the calls to manipulate the secondary interrupts, which
were done without holding the port lock, can also lead to the receiver
being left disabled when set_termios() races with the console code (e.g.
when init opens the tty during boot). This can manifest itself as a
serial getty not accepting input.
The calls to stop and start rx in set_termios() can similarly race with
DMA completion and, for example, cause the DMA buffer to be unmapped
twice or the mapping to be leaked.
Fix this by only enabling the receiver during startup and while holding
the port lock to avoid racing with the console code.
Fixes: 6f3c3cafb115 ("serial: qcom-geni: disable interrupts during console writes")
Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Cc: stable@vger.kernel.org # 6.3
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241009145110.16847-6-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make sure to wait for the DMA transfer to complete when cancelling the
rx command on stop_rx(). This specifically prevents the DMA completion
interrupt from firing after rx has been restarted, something which can
lead to an IOMMU fault and hosed rx when the interrupt handler unmaps
the DMA buffer for the new command:
qcom_geni_serial 988000.serial: serial engine reports 0 RX bytes in!
arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x563
arm-smmu 15000000.iommu: FSYNR0 = 00210013 [S1CBNDX=33 WNR PLVL=3]
Bluetooth: hci0: command 0xfc00 tx timeout
Bluetooth: hci0: Reading QCA version information failed (-110)
Also add the missing state machine reset which is needed in case
cancellation fails.
Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Cc: stable@vger.kernel.org # 6.3
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241009145110.16847-5-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A commit adding back the stopping of tx on port shutdown failed to add
back the locking which had also been removed by commit e83766334f96
("tty: serial: qcom_geni_serial: No need to stop tx/rx on UART
shutdown").
Holding the port lock is needed to serialise against the console code,
which may update the interrupt enable register and access the port
state.
Fixes: d8aca2f96813 ("tty: serial: qcom-geni-serial: stop operations in progress at shutdown")
Fixes: 947cc4ecc06c ("serial: qcom-geni: fix soft lockup on sw flow control and suspend")
Cc: stable@vger.kernel.org # 6.3
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241009145110.16847-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 35781d8356a2eecaa6074ceeb80ee22e252fcdae.
Hibernation is not supported on Qualcomm platforms with mainline
kernels yet a broken vendor implementation for the GENI serial driver
made it upstream.
This is effectively dead code that cannot be tested and should just be
removed, but if these paths were ever hit for an open non-console port
they would crash the machine as the driver would fail to enable clocks
during restore() (i.e. all ports would have to be closed by drivers and
user space before hibernating the system to avoid this as a comment in
the code hinted at).
The broken implementation also added a random call to enable the
receiver in the port setup code where it does not belong and which
enables the receiver prematurely for console ports.
Fixes: 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature")
Cc: stable@vger.kernel.org # 6.2
Cc: Aniket Randive <quic_arandive@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241009145110.16847-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The polled console (KGDB/KDB) implementation must not call port setup
unconditionally as the port may already be in use by the console or a
getty.
Only make sure that the receiver is enabled, but do not enable any
device interrupts.
Fixes: d8851a96ba25 ("tty: serial: qcom-geni-serial: Add a poll_init() function")
Cc: stable@vger.kernel.org # 6.4
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241009145110.16847-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When sending data using DMA at high baudrate (4 Mbdps in local test case) to
a device with small RX buffer which keeps asserting RTS after every received
byte, it is possible that the iMX UART driver would not recognize the falling
edge of RTS input signal and get stuck, unable to transmit any more data.
This condition happens when the following sequence of events occur:
- imx_uart_mctrl_check() is called at some point and takes a snapshot of UART
control signal status into sport->old_status using imx_uart_get_hwmctrl().
The RTSS/TIOCM_CTS bit is of interest here (*).
- DMA transfer occurs, the remote device asserts RTS signal after each byte.
The i.MX UART driver recognizes each such RTS signal change, raises an
interrupt with USR1 register RTSD bit set, which leads to invocation of
__imx_uart_rtsint(), which calls uart_handle_cts_change().
- If the RTS signal is deasserted, uart_handle_cts_change() clears
port->hw_stopped and unblocks the port for further data transfers.
- If the RTS is asserted, uart_handle_cts_change() sets port->hw_stopped
and blocks the port for further data transfers. This may occur as the
last interrupt of a transfer, which means port->hw_stopped remains set
and the port remains blocked (**).
- Any further data transfer attempts will trigger imx_uart_mctrl_check(),
which will read current status of UART control signals by calling
imx_uart_get_hwmctrl() (***) and compare it with sport->old_status .
- If current status differs from sport->old_status for RTS signal,
uart_handle_cts_change() is called and possibly unblocks the port
by clearing port->hw_stopped .
- If current status does not differ from sport->old_status for RTS
signal, no action occurs. This may occur in case prior snapshot (*)
was taken before any transfer so the RTS is deasserted, current
snapshot (***) was taken after a transfer and therefore RTS is
deasserted again, which means current status and sport->old_status
are identical. In case (**) triggered when RTS got asserted, and
made port->hw_stopped set, the port->hw_stopped will remain set
because no change on RTS line is recognized by this driver and
uart_handle_cts_change() is not called from here to unblock the
port->hw_stopped.
Update sport->old_status in __imx_uart_rtsint() accordingly to make
imx_uart_mctrl_check() detect such RTS change. Note that TIOCM_CAR
and TIOCM_RI bits in sport->old_status do not suffer from this problem.
Fixes: ceca629e0b48 ("[ARM] 2971/1: i.MX uart handle rts irq")
Cc: stable <stable@kernel.org>
Reviewed-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20241002184133.19427-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
BUG: KASAN: slab-use-after-free in gsm_cleanup_mux+0x77b/0x7b0
drivers/tty/n_gsm.c:3160 [n_gsm]
Read of size 8 at addr ffff88815fe99c00 by task poc/3379
CPU: 0 UID: 0 PID: 3379 Comm: poc Not tainted 6.11.0+ #56
Hardware name: VMware, Inc. VMware Virtual Platform/440BX
Desktop Reference Platform, BIOS 6.00 11/12/2020
Call Trace:
<TASK>
gsm_cleanup_mux+0x77b/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm]
__pfx_gsm_cleanup_mux+0x10/0x10 drivers/tty/n_gsm.c:3124 [n_gsm]
__pfx_sched_clock_cpu+0x10/0x10 kernel/sched/clock.c:389
update_load_avg+0x1c1/0x27b0 kernel/sched/fair.c:4500
__pfx_min_vruntime_cb_rotate+0x10/0x10 kernel/sched/fair.c:846
__rb_insert_augmented+0x492/0xbf0 lib/rbtree.c:161
gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm]
_raw_spin_lock_irqsave+0x92/0xf0 arch/x86/include/asm/atomic.h:107
__pfx_gsmld_ioctl+0x10/0x10 drivers/tty/n_gsm.c:3822 [n_gsm]
ktime_get+0x5e/0x140 kernel/time/timekeeping.c:195
ldsem_down_read+0x94/0x4e0 arch/x86/include/asm/atomic64_64.h:79
__pfx_ldsem_down_read+0x10/0x10 drivers/tty/tty_ldsem.c:338
__pfx_do_vfs_ioctl+0x10/0x10 fs/ioctl.c:805
tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818
Allocated by task 65:
gsm_data_alloc.constprop.0+0x27/0x190 drivers/tty/n_gsm.c:926 [n_gsm]
gsm_send+0x2c/0x580 drivers/tty/n_gsm.c:819 [n_gsm]
gsm1_receive+0x547/0xad0 drivers/tty/n_gsm.c:3038 [n_gsm]
gsmld_receive_buf+0x176/0x280 drivers/tty/n_gsm.c:3609 [n_gsm]
tty_ldisc_receive_buf+0x101/0x1e0 drivers/tty/tty_buffer.c:391
tty_port_default_receive_buf+0x61/0xa0 drivers/tty/tty_port.c:39
flush_to_ldisc+0x1b0/0x750 drivers/tty/tty_buffer.c:445
process_scheduled_works+0x2b0/0x10d0 kernel/workqueue.c:3229
worker_thread+0x3dc/0x950 kernel/workqueue.c:3391
kthread+0x2a3/0x370 kernel/kthread.c:389
ret_from_fork+0x2d/0x70 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:257
Freed by task 3367:
kfree+0x126/0x420 mm/slub.c:4580
gsm_cleanup_mux+0x36c/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm]
gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm]
tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818
[Analysis]
gsm_msg on the tx_ctrl_list or tx_data_list of gsm_mux
can be freed by multi threads through ioctl,which leads
to the occurrence of uaf. Protect it by gsm tx lock.
Signed-off-by: Longlong Xia <xialonglong@kylinos.cn>
Cc: stable <stable@kernel.org>
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240926130213.531959-1-xialonglong@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
font.data may not initialize all memory spaces depending on the implementation
of vc->vc_sw->con_font_get. This may cause info-leak, so to prevent this, it
is safest to modify it to initialize the allocated memory space to 0, and it
generally does not affect the overall performance of the system.
Cc: stable@vger.kernel.org
Reported-by: syzbot+955da2d57931604ee691@syzkaller.appspotmail.com
Fixes: 05e2600cb0a4 ("VT: Bump font size limitation to 64x128 pixels")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://lore.kernel.org/r/20241010174619.59662-1-aha310510@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
`kaddr` becomes useless after switching to metabuf.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241010235830.1535616-1-hsiangkao@linux.alibaba.com
|
|
Just fold it into the caller for simplicity.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241010090420.405871-1-hsiangkao@linux.alibaba.com
|
|
Only regular inodes are allowed for file-backed mounts, not directories
(as seen in the original syzbot case) or special inodes.
Also ensure that .read_folio() is implemented on the underlying fs
for the primary device.
Fixes: fb176750266a ("erofs: add file-backed mount support")
Reported-by: syzbot+001306cd9c92ce0df23f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/00000000000011bdde0622498ee3@google.com
Tested-by: syzbot+001306cd9c92ce0df23f@syzkaller.appspotmail.com
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240917130803.32418-1-hsiangkao@linux.alibaba.com
|
|
Following OOPS is encountered while loading test_bpf module
on powerpc 8xx:
[ 218.835567] BUG: Unable to handle kernel data access on write at 0xcb000000
[ 218.842473] Faulting instruction address: 0xc0017a80
[ 218.847451] Oops: Kernel access of bad area, sig: 11 [#1]
[ 218.852854] BE PAGE_SIZE=16K PREEMPT CMPC885
[ 218.857207] SAF3000 DIE NOTIFICATION
[ 218.860713] Modules linked in: test_bpf(+) test_module
[ 218.865867] CPU: 0 UID: 0 PID: 527 Comm: insmod Not tainted 6.11.0-s3k-dev-09856-g3de3d71ae2e6-dirty #1280
[ 218.875546] Hardware name: MIAE 8xx 0x500000 CMPC885
[ 218.880521] NIP: c0017a80 LR: beab859c CTR: 000101d4
[ 218.885584] REGS: cac2bc90 TRAP: 0300 Not tainted (6.11.0-s3k-dev-09856-g3de3d71ae2e6-dirty)
[ 218.894308] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 55005555 XER: a0007100
[ 218.901290] DAR: cb000000 DSISR: c2000000
[ 218.901290] GPR00: 000185d1 cac2bd50 c21b9580 caf7c030 c3883fcc 00000008 cafffffc 00000000
[ 218.901290] GPR08: 00040000 18300000 20000000 00000004 99005555 100d815e ca669d08 00000369
[ 218.901290] GPR16: ca730000 00000000 ca2c004c 00000000 00000000 0000035d 00000311 00000369
[ 218.901290] GPR24: ca732240 00000001 00030ba3 c3800000 00000000 00185d48 caf7c000 ca2c004c
[ 218.941087] NIP [c0017a80] memcpy+0x88/0xec
[ 218.945277] LR [beab859c] test_bpf_init+0x22c/0x3c90 [test_bpf]
[ 218.951476] Call Trace:
[ 218.953916] [cac2bd50] [beab8570] test_bpf_init+0x200/0x3c90 [test_bpf] (unreliable)
[ 218.962034] [cac2bde0] [c0004c04] do_one_initcall+0x4c/0x1fc
[ 218.967706] [cac2be40] [c00a2ec4] do_init_module+0x68/0x360
[ 218.973292] [cac2be60] [c00a5194] init_module_from_file+0x8c/0xc0
[ 218.979401] [cac2bed0] [c00a5568] sys_finit_module+0x250/0x3f0
[ 218.985248] [cac2bf20] [c000e390] system_call_exception+0x8c/0x15c
[ 218.991444] [cac2bf30] [c00120a8] ret_from_syscall+0x0/0x28
This happens in the main loop of memcpy()
==> c0017a80: 7c 0b 37 ec dcbz r11,r6
c0017a84: 80 e4 00 04 lwz r7,4(r4)
c0017a88: 81 04 00 08 lwz r8,8(r4)
c0017a8c: 81 24 00 0c lwz r9,12(r4)
c0017a90: 85 44 00 10 lwzu r10,16(r4)
c0017a94: 90 e6 00 04 stw r7,4(r6)
c0017a98: 91 06 00 08 stw r8,8(r6)
c0017a9c: 91 26 00 0c stw r9,12(r6)
c0017aa0: 95 46 00 10 stwu r10,16(r6)
c0017aa4: 42 00 ff dc bdnz c0017a80 <memcpy+0x88>
Commit ac9f97ff8b32 ("powerpc/8xx: Inconditionally use task PGDIR in
DTLB misses") relies on re-reading DAR register to know if an error is
due to a missing copy of a PMD entry in task's PGDIR, allthough DAR
was already read in the exception prolog and copied into thread
struct. This is because is it done very early in the exception and
there are not enough registers available to keep a pointer to thread
struct.
However, dcbz instruction is buggy and doesn't update DAR register on
fault. That is detected and generates a call to FixupDAR workaround
which updates DAR copy in thread struct but doesn't fix DAR register.
Let's fix DAR in addition to the update of DAR copy in thread struct.
Fixes: ac9f97ff8b32 ("powerpc/8xx: Inconditionally use task PGDIR in DTLB misses")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2b851399bd87e81c6ccb87ea3a7a6b32c7aa04d7.1728118396.git.christophe.leroy@csgroup.eu
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix error checking with xa_store() (Matthe Auld)
- Fix missing freq restore on GSC load error (Vinay)
- Fix wedged_mode file permission (Matt Roper)
- Fix use-after-free in ct communication (Matthew Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/jri65tmv3bjbhqhxs5smv45nazssxzhtwphojem4uufwtjuliy@gsdhlh6kzsdy
|
|
Since kvfree() already checks if its argument is NULL, an additional
check before calling kvfree() is unnecessary and can be removed.
Remove both and the following Coccinelle/coccicheck warnings reported by
ifnullfree.cocci:
WARNING: NULL check before some freeing functions is not needed
WARNING: NULL check before some freeing functions is not needed
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241007115131.1811-3-thorsten.blum@linux.dev
|
|
Add assertions in `bpf_link_info.uprobe_multi` test to verify that
`count` and `path_size` fields are correctly populated when the fields
are unset.
This tests a previous bug where the `path_size` field was not populated
when `path` and `path_size` were unset.
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241011000803.681190-2-wudevelops@gmail.com
|
|
Previously when retrieving `bpf_link_info.uprobe_multi` with `path` and
`path_size` fields unset, the `path_size` field is not populated
(remains 0). This behavior was inconsistent with how other input/output
string buffer fields work, as the field should be populated in cases
when:
- both buffer and length are set (currently works as expected)
- both buffer and length are unset (not working as expected)
This patch now fills the `path_size` field when `path` and `path_size`
are unset.
Fixes: e56fdbfb06e2 ("bpf: Add link_info support for uprobe multi link")
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241011000803.681190-1-wudevelops@gmail.com
|
|
Linking of urandom_read and liburandom_read.so prefers LLVM's 'ld.lld' but
falls back to using 'ld' if unsupported. However, this fallback discards
any existing makefile macro for LD and can break cross-compilation.
Fix by changing the fallback to use the target linker $(LD), passed via
'-fuse-ld=' using an absolute path rather than a linker "flavour".
Fixes: 08c79c9cd67f ("selftests/bpf: Don't force lld on non-x86 architectures")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241009040720.635260-1-tony.ambardar@gmail.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
fbdev-dma:
- Only clean up deferred I/O if instanciated
nouveau:
- dmem: Fix privileged error in copy engine channel; Fix possible
data leak in migrate_to_ram()
- gsp: Fix coding style
sched:
- Avoid leaking lockdep map
v3d:
- Stop active perfmon before destroying it
vc4:
- Stop active perfmon before destroying it
xe:
- Drop GuC submit_wq pool
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241010133708.GA461532@localhost.localdomain
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- HDCP refcount fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zwd78Tnw8t3w9F16@jlahtine-mobl.ger.corp.intel.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-fixes
Pull a Samsung clk driver fix from Krzysztof Kozlowski:
Add missing sentinel in of_device_id table so the code iterating over it
will not go over the size of an array.
* tag 'samsung-clk-fixes-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
clk: samsung: Fix out-of-bound access of of_match_node()
|
|
While enabling and disabling a BPF scheduler, every task is iterated a
couple times by walking scx_tasks. Except for one, all iterations keep
holding scx_tasks_lock. On multi-socket systems under heavy rq lock
contention and high number of threads, this can can lead to RCU and other
stalls.
The following is triggered on a 2 x AMD EPYC 7642 system (192 logical CPUs)
running `stress-ng --workload 150 --workload-threads 10` with >400k idle
threads and RCU stall period reduced to 5s:
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: 91-...!: (10 ticks this GP) idle=0754/1/0x4000000000000000 softirq=18204/18206 fqs=17
rcu: 186-...!: (17 ticks this GP) idle=ec54/1/0x4000000000000000 softirq=25863/25866 fqs=17
rcu: (detected by 80, t=10042 jiffies, g=89305, q=33 ncpus=192)
Sending NMI from CPU 80 to CPUs 91:
NMI backtrace for cpu 91
CPU: 91 UID: 0 PID: 284038 Comm: sched_ext_ops_h Kdump: loaded Not tainted 6.12.0-rc2-work-g6bf5681f7ee2-dirty #471
Hardware name: Supermicro Super Server/H11DSi, BIOS 2.8 12/14/2023
Sched_ext: simple (disabling+all)
RIP: 0010:queued_spin_lock_slowpath+0x17b/0x2f0
Code: 02 c0 10 03 00 83 79 08 00 75 08 f3 90 83 79 08 00 74 f8 48 8b 11 48 85 d2 74 09 0f 0d 0a eb 0a 31 d2 eb 06 31 d2 eb 02 f3 90 <8b> 07 66 85 c0 75 f7 39 d8 75 0d be 01 00 00 00 89 d8 f0 0f b1 37
RSP: 0018:ffffc9000fadfcb8 EFLAGS: 00000002
RAX: 0000000001700001 RBX: 0000000001700000 RCX: ffff88bfcaaf10c0
RDX: 0000000000000000 RSI: 0000000000000101 RDI: ffff88bfca8f0080
RBP: 0000000001700000 R08: 0000000000000090 R09: ffffffffffffffff
R10: ffff88a74761b268 R11: 0000000000000000 R12: ffff88a6b6765460
R13: ffffc9000fadfd60 R14: ffff88bfca8f0080 R15: ffff88bfcaac0000
FS: 0000000000000000(0000) GS:ffff88bfcaac0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5c55f526a0 CR3: 0000000afd474000 CR4: 0000000000350eb0
Call Trace:
<NMI>
</NMI>
<TASK>
do_raw_spin_lock+0x9c/0xb0
task_rq_lock+0x50/0x190
scx_task_iter_next_locked+0x157/0x170
scx_ops_disable_workfn+0x2c2/0xbf0
kthread_worker_fn+0x108/0x2a0
kthread+0xeb/0x110
ret_from_fork+0x36/0x40
ret_from_fork_asm+0x1a/0x30
</TASK>
Sending NMI from CPU 80 to CPUs 186:
NMI backtrace for cpu 186
CPU: 186 UID: 0 PID: 51248 Comm: fish Kdump: loaded Not tainted 6.12.0-rc2-work-g6bf5681f7ee2-dirty #471
scx_task_iter can safely drop locks while iterating. Make
scx_task_iter_next() drop scx_tasks_lock every 32 iterations to avoid
stalls.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
|
|
Iterating with scx_task_iter involves scx_tasks_lock and optionally the rq
lock of the task being iterated. Both locks can be released during iteration
and the iteration can be continued after re-grabbing scx_tasks_lock.
Currently, all lock handling is pushed to the caller which is a bit
cumbersome and makes it difficult to add lock-aware behaviors. Make the
scx_task_iter helpers handle scx_tasks_lock.
- scx_task_iter_init/scx_taks_iter_exit() now grabs and releases
scx_task_lock, respectively. Renamed to
scx_task_iter_start/scx_task_iter_stop() to more clearly indicate that
there are non-trivial side-effects.
- Add __ prefix to scx_task_iter_rq_unlock() to indicate that the function
is internal.
- Add scx_task_iter_unlock/relock(). The former drops both rq lock (if held)
and scx_tasks_lock and the latter re-locks only scx_tasks_lock.
This doesn't cause behavior changes and will be used to implement stall
avoidance.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
|
|
Bypass mode was depending on ops.select_cpu() which can't be trusted as with
the rest of the BPF scheduler. Always enable and use scx_select_cpu_dfl() in
bypass mode.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
|
|
Move the sanity check from the inner function scx_select_cpu_dfl() to the
exported kfunc scx_bpf_select_cpu_dfl(). This doesn't cause behavior
differences and will allow using scx_select_cpu_dfl() in bypass mode
regardless of scx_builtin_idle_enabled.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The disable path caps p->scx.slice to SCX_SLICE_DFL. As the field is already
being ignored at this stage during disable, the only effect this has is that
when the next BPF scheduler is loaded, it won't see unreasonable left-over
slices. Ultimately, this shouldn't matter but it's better to start in a
known state. Drop p->scx.slice capping from the disable path and instead
reset it to SCX_SLICE_DFL in the enable path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
|
|
This reverts commit 6f34d8d382d64e7d8e77f5a9ddfd06f4c04937b0.
Slice length is ignored while bypassing and tasks are switched on every tick
and thus the patch does not make any difference. The perceived difference
was from test noise.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
|
|
Fix a few different compiler errors that cause rustc-option to give
wrong results.
If KBUILD_RUSTFLAGS or the flags being tested contain any -Z flags, then
the error below is generated. The RUSTC_BOOTSTRAP environment variable
is added to fix this error.
error: the option `Z` is only accepted on the nightly compiler
help: consider switching to a nightly toolchain: `rustup default nightly`
note: selecting a toolchain with `+toolchain` arguments require a rustup proxy;
see <https://rust-lang.github.io/rustup/concepts/index.html>
note: for more information about Rust's stability policy, see
<https://doc.rust-lang.org/book/appendix-07-nightly-rust.html#unstable-features>
error: 1 nightly option were parsed
Note that RUSTC_BOOTSTRAP is also defined in the top-level Makefile,
but Make-exported variables are unfortunately *not* inherited. That said,
this is changing as of commit 98da874c4303 ("[SV 10593] Export variables
to $(shell ...) commands"), which is part of Make 4.4.
The probe may also fail with the error message below. To fix it,
the /dev/null argument is replaced with a file containing the crate
attribute #![no_core]. The #![no_core] attribute ensures that rustc does
not look for the standard library. It's not possible to instead supply
a standard library (i.e. `core`) to rustc, as we need `rustc-option`
before the Rust standard library is compiled.
error[E0463]: can't find crate for `std`
|
= note: the `aarch64-unknown-none` target may not be installed
= help: consider downloading the target with `rustup target add aarch64-unknown-none`
= help: consider building the standard library from source with `cargo build -Zbuild-std`
The -o and --out-dir parameters are altered to fix this warning:
warning: ignoring --out-dir flag due to -o flag
The --sysroot flag is provided as we would otherwise require it to be
present in KBUILD_RUSTFLAGS. The --emit=obj flag is used to write the
resulting object file to /dev/null instead of writing it to a file
in $(TMPOUT).
I verified that the Kconfig version of rustc-option doesn't have the
same issues.
Fixes: c42297438aee ("kbuild: rust: Define probing macros for rustc")
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20241009-rustc-option-bootstrap-v3-1-5fa0d520efba@google.com
[ Reworded as discussed in the list. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- dsa: sja1105: fix reception from VLAN-unaware bridges
- Revert "net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is
enabled"
- eth: fec: don't save PTP state if PTP is unsupported
Current release - new code bugs:
- smc: fix lack of icsk_syn_mss with IPPROTO_SMC, prevent null-deref
- eth: airoha: update Tx CPU DMA ring idx at the end of xmit loop
- phy: aquantia: AQR115c fix up PMA capabilities
Previous releases - regressions:
- tcp: 3 fixes for retrans_stamp and undo logic
Previous releases - always broken:
- net: do not delay dst_entries_add() in dst_release()
- netfilter: restrict xtables extensions to families that are safe,
syzbot found a way to combine ebtables with extensions that are
never used by userspace tools
- sctp: ensure sk_state is set to CLOSED if hashing fails in
sctp_listen_start
- mptcp: handle consistently DSS corruption, and prevent corruption
due to large pmtu xmit"
* tag 'net-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
MAINTAINERS: Add headers and mailing list to UDP section
MAINTAINERS: consistently exclude wireless files from NETWORKING [GENERAL]
slip: make slhc_remember() more robust against malicious packets
net/smc: fix lacks of icsk_syn_mss with IPPROTO_SMC
ppp: fix ppp_async_encode() illegal access
docs: netdev: document guidance on cleanup patches
phonet: Handle error of rtnl_register_module().
mpls: Handle error of rtnl_register_module().
mctp: Handle error of rtnl_register_module().
bridge: Handle error of rtnl_register_module().
vxlan: Handle error of rtnl_register_module().
rtnetlink: Add bulk registration helpers for rtnetlink message handlers.
net: do not delay dst_entries_add() in dst_release()
mptcp: pm: do not remove closing subflows
mptcp: fallback when MPTCP opts are dropped after 1st data
tcp: fix mptcp DSS corruption due to large pmtu xmit
mptcp: handle consistently DSS corruption
net: netconsole: fix wrong warning
net: dsa: refuse cross-chip mirroring operations
net: fec: don't save PTP state if PTP is unsupported
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Ring-buffer fix: do not have boot-mapped buffers use CPU hotplug
callbacks
When a ring buffer is mapped to memory assigned at boot, it also
splits it up evenly between the possible CPUs. But the allocation code
still attached a CPU notifier callback to this ring buffer. When a CPU
is added, the callback will happen and another per-cpu buffer is
created for the ring buffer.
But for boot mapped buffers, there is no room to add another one (as
they were all created already). The result of calling the CPU hotplug
notifier on a boot mapped ring buffer is unpredictable and could lead
to a system crash.
If the ring buffer is boot mapped simply do not attach the CPU
notifier to it"
* tag 'trace-ringbuffer-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Do not have boot mapped buffers hook to CPU hotplug
|
|
'map' is allocated using devm_* which takes care of freeing the allocated
data, but in error paths there is a call to pinctrl_utils_free_map()
which also does kfree(map) which leads to a double free.
Use kcalloc() instead of devm_kcalloc() as freeing is manually handled.
Fixes: a29d8e93e710 ("pinctrl: sophgo: add support for CV1800B SoC")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/20241010111830.3474719-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Currently if condition (!bo and !vmw_kms_srf_ok()) was met
we go to err_out with ret == 0.
err_out dereferences vfb if ret == 0, but in our case vfb is still NULL.
Fix this by assigning sensible error to ret.
Found by Linux Verification Center (linuxtesting.org) with SVACE
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Cc: stable@vger.kernel.org
Fixes: 810b3e1683d0 ("drm/vmwgfx: Support topology greater than texture size")
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241002122429.1981822-1-kniv@yandex-team.ru
|
|
Do not validate format equality for the non 3d cases to allow xrgb to
argb copies and make sure the dx binding flags are only used
on dx compatible surfaces.
Fixes basic 2d kms setup on configurations without 3d. There's little
practical benefit to it because kms framebuffer coherence is disabled
on configurations without 3d but with those changes the code actually
makes sense.
v2: Remove the now unused format variable
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: d6667f0ddf46 ("drm/vmwgfx: Fix handling of dumb buffers")
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.9+
Cc: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Cc: Martin Krastev <martin.krastev@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827043905.472825-1-zack.rusin@broadcom.com
|
|
Handle unlikely ENOMEN condition and other errors in
vmw_stdu_connector_atomic_check.
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 75c3e8a26a35 ("drm/vmwgfx: Trigger a modeset when the screen moves")
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809183756.27283-1-ian.forbes@broadcom.com
|
