| Age | Commit message (Collapse) | Author |
|---|
|
This driver makes use of regmap_spi, but does not select the required
module.
Add the missing 'select REGMAP_SPI'.
Fixes: b59c04155901 ("iio: frequency: admv4420.c: Add support for ADMV4420")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241007-ad2s1210-select-v2-2-7345d228040f@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Format the entries of these drivers in the Kconfig, where spaces
instead of tabs were used.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241007-ad2s1210-select-v2-1-7345d228040f@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Currently the array size is only limited by the largest kmalloc size which
is incorrect. This change will also return a more specific error message
than ENOMEM to userspace.
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240808200634.1074083-1-ian.forbes@broadcom.com
|
|
Add select IIO_BUFFER and select IIO_TRIGGERED_BUFFER to the Kconfig for
the ad4695 driver.
Fixes: 6cc7e4bf2e08 ("iio: adc: ad4695: implement triggered buffer")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241009-iio-adc-ad4695-fix-kconfig-v1-1-e2a4dfde8d55@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This driver makes use of triggered buffers, but does not select the
required modules.
Fixes: 2a86487786b5 ("iio: adc: ti-ads8688: add trigger and buffer support")
Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20241003-iio-select-v1-4-67c0385197cd@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
If hid_sensor_set_report_latency() fails, the error code should be returned
instead of a value likely to be interpreted as 'success'.
Fixes: 138bc7969c24 ("iio: hid-sensor-hub: Implement batch mode")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/c50640665f091a04086e5092cf50f73f2055107a.1727980825.git.christophe.jaillet@wanadoo.fr
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Toke Høiland-Jørgensen says:
====================
Fix caching of BTF for kfuncs in the verifier
When playing around with defining kfuncs in some custom modules, we
noticed that if a BPF program calls two functions with the same
signature in two different modules, the function from the wrong module
may sometimes end up being called. Whether this happens depends on the
order of the calls in the BPF program, which turns out to be due to the
use of sort() inside __find_kfunc_desc_btf() in the verifier code.
This series contains a fix for the issue (first patch), and a selftest
to trigger it (last patch). The middle commit is a small refactor to
expose the module loading helper functions in testing_helpers.c. See the
individual patch descriptions for more details.
Changes in v2:
- Drop patch that refactors module building in selftests (Alexei)
- Get rid of expect_val function argument in selftest (Jiri)
- Collect ACKs
- Link to v1: https://lore.kernel.org/r/20241008-fix-kfunc-btf-caching-for-modules-v1-0-dfefd9aa4318@redhat.com
====================
Link: https://lore.kernel.org/r/20241010-fix-kfunc-btf-caching-for-modules-v2-0-745af6c1af98@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a test case for kfuncs from multiple external modules, checking
that the correct kfuncs are called regardless of which order they're
called in. Specifically, check that calling the kfuncs in an order
different from the one the modules' BTF are loaded in works.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20241010-fix-kfunc-btf-caching-for-modules-v2-3-745af6c1af98@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Generalize the previous [un]load_bpf_testmod() helpers (in
testing_helpers.c) to the more generic [un]load_module(), which can
load an arbitrary kernel module by name. This allows future selftests
to more easily load custom kernel modules other than bpf_testmod.ko.
Refactor [un]load_bpf_testmod() to wrap this new helper.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20241010-fix-kfunc-btf-caching-for-modules-v2-2-745af6c1af98@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The verifier contains a cache for looking up module BTF objects when
calling kfuncs defined in modules. This cache uses a 'struct
bpf_kfunc_btf_tab', which contains a sorted list of BTF objects that
were already seen in the current verifier run, and the BTF objects are
looked up by the offset stored in the relocated call instruction using
bsearch().
The first time a given offset is seen, the module BTF is loaded from the
file descriptor passed in by libbpf, and stored into the cache. However,
there's a bug in the code storing the new entry: it stores a pointer to
the new cache entry, then calls sort() to keep the cache sorted for the
next lookup using bsearch(), and then returns the entry that was just
stored through the stored pointer. However, because sort() modifies the
list of entries in place *by value*, the stored pointer may no longer
point to the right entry, in which case the wrong BTF object will be
returned.
The end result of this is an intermittent bug where, if a BPF program
calls two functions with the same signature in two different modules,
the function from the wrong module may sometimes end up being called.
Whether this happens depends on the order of the calls in the BPF
program (as that affects whether sort() reorders the array of BTF
objects), making it especially hard to track down. Simon, credited as
reporter below, spent significant effort analysing and creating a
reproducer for this issue. The reproducer is added as a selftest in a
subsequent patch.
The fix is straight forward: simply don't use the stored pointer after
calling sort(). Since we already have an on-stack pointer to the BTF
object itself at the point where the function return, just use that, and
populate it from the cache entry in the branch where the lookup
succeeds.
Fixes: 2357672c54c3 ("bpf: Introduce BPF support for kernel module function calls")
Reported-by: Simon Sundberg <simon.sundberg@kau.se>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20241010-fix-kfunc-btf-caching-for-modules-v2-1-745af6c1af98@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A root node is required to apply DT overlays. A root node is usually
present after commit 7b937cc243e5 ("of: Create of_root if no dtb
provided by firmware"), except for on arm64 systems booted with ACPI
tables. In that case, the root node is intentionally not populated
because it would "allow DT devices to be instantiated atop an ACPI base
system"[1].
Introduce an OF function that skips the kunit test if the root node
isn't populated. Limit the test to when both CONFIG_ARM64 and
CONFIG_ACPI are set, because otherwise the lack of a root node is a bug.
Make the function private and take a kunit test parameter so that it
can't be abused to test for the presence of the root node in non-test
code.
Use this function to skip tests that require the root node. Currently
that's the DT tests and any tests that apply overlays.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/r/6cd337fb-38f0-41cb-b942-5844b84433db@roeck-us.net
Link: https://lore.kernel.org/r/Zd4dQpHO7em1ji67@FVFF77S0Q05N.cambridge.arm.com [1]
Fixes: 893ecc6d2d61 ("of: Add KUnit test to confirm DTB is loaded")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20241009204133.1169931-1-sboyd@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- update fstrim loop and add more cancellation points, fix reported
delayed or blocked suspend if there's a huge chunk queued
- fix error handling in recent qgroup xarray conversion
- in zoned mode, fix warning printing device path without RCU
protection
- again fix invalid extent xarray state (6252690f7e1b), lost due to
refactoring
* tag 'for-6.12-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix clear_dirty and writeback ordering in submit_one_sector()
btrfs: zoned: fix missing RCU locking in error message when loading zone info
btrfs: fix missing error handling when adding delayed ref with qgroups enabled
btrfs: add cancellation points to trim loops
btrfs: split remaining space to discard in chunks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix NFSD bring-up / shutdown
- Fix a UAF when releasing a stateid
* tag 'nfsd-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix possible badness in FREE_STATEID
nfsd: nfsd_destroy_serv() must call svc_destroy() even if nfsd_startup_net() failed
NFSD: Mark filecache "down" if init fails
|
|
After a CPU has set itself offline and before it eventually calls
rcutree_report_cpu_dead(), there are still opportunities for callbacks
to be enqueued, for example from a softirq. When that happens on NOCB,
the rcuog wake-up is deferred through an IPI to an online CPU in order
not to call into the scheduler and risk arming the RT-bandwidth after
hrtimers have been migrated out and disabled.
But performing a synchronized IPI from a softirq is buggy as reported in
the following scenario:
WARNING: CPU: 1 PID: 26 at kernel/smp.c:633 smp_call_function_single
Modules linked in: rcutorture torture
CPU: 1 UID: 0 PID: 26 Comm: migration/1 Not tainted 6.11.0-rc1-00012-g9139f93209d1 #1
Stopper: multi_cpu_stop+0x0/0x320 <- __stop_cpus+0xd0/0x120
RIP: 0010:smp_call_function_single
<IRQ>
swake_up_one_online
__call_rcu_nocb_wake
__call_rcu_common
? rcu_torture_one_read
call_timer_fn
__run_timers
run_timer_softirq
handle_softirqs
irq_exit_rcu
? tick_handle_periodic
sysvec_apic_timer_interrupt
</IRQ>
Fix this with forcing deferred rcuog wake up through the NOCB timer when
the CPU is offline. The actual wake up will happen from
rcutree_report_cpu_dead().
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202409231644.4c55582d-lkp@intel.com
Fixes: 9139f93209d1 ("rcu/nocb: Fix RT throttling hrtimer armed from offline CPU")
Reviewed-by: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
Pull xfs fixes from Carlos Maiolino:
- A few small typo fixes
- fstests xfs/538 DEBUG-only fix
- Performance fix on blockgc on COW'ed files, by skipping trims on
cowblock inodes currently opened for write
- Prevent cowblocks to be freed under dirty pagecache during unshare
- Update MAINTAINERS file to quote the new maintainer
* tag 'xfs-6.12-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix a typo
xfs: don't free cowblocks from under dirty pagecache on unshare
xfs: skip background cowblock trims on inodes open for write
xfs: support lowmode allocations in xfs_bmap_exact_minlen_extent_alloc
xfs: call xfs_bmap_exact_minlen_extent_alloc from xfs_bmap_btalloc
xfs: don't ifdef around the exact minlen allocations
xfs: fold xfs_bmap_alloc_userdata into xfs_bmapi_allocate
xfs: distinguish extra split from real ENOSPC from xfs_attr_node_try_addname
xfs: distinguish extra split from real ENOSPC from xfs_attr3_leaf_split
xfs: return bool from xfs_attr3_leaf_add
xfs: merge xfs_attr_leaf_try_add into xfs_attr_leaf_addname
xfs: Use try_cmpxchg() in xlog_cil_insert_pcp_aggregate()
xfs: scrub: convert comma to semicolon
xfs: Remove empty declartion in header file
MAINTAINERS: add Carlos Maiolino as XFS release manager
|
|
Simon Horman says:
====================
MAINTAINERS: Networking file coverage updates
The aim of this proposal is to make the handling of some files,
related to Networking and Wireless, more consistently. It does so by:
1. Adding some more headers to the UDP section, making it consistent
with the TCP section.
2. Excluding some files relating to Wireless from NETWORKING [GENERAL],
making their handling consistent with other files related to
Wireless.
The aim of this is to make things more consistent. And for MAINTAINERS
to better reflect the situation on the ground. I am more than happy to
be told that the current state of affairs is fine. Or for other ideas to
be discussed.
v1: https://lore.kernel.org/20241004-maint-net-hdrs-v1-0-41fd555aacc5@kernel.org
====================
Link: https://patch.msgid.link/20241009-maint-net-hdrs-v2-0-f2c86e7309c8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add netdev mailing list and some more udp.h headers to the UDP section.
This is now more consistent with the TCP section.
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241009-maint-net-hdrs-v2-2-f2c86e7309c8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We already exclude wireless drivers from the netdev@ traffic, to
delegate it to linux-wireless@, and avoid overwhelming netdev@.
Many of the following wireless-related sections MAINTAINERS
are already not included in the NETWORKING [GENERAL] section.
For consistency, exclude those that are.
* 802.11 (including CFG80211/NL80211)
* MAC80211
* RFKILL
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241009-maint-net-hdrs-v2-1-f2c86e7309c8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pick_next_task_scx() was turned into pick_task_scx() since
commit 753e2836d139 ("sched_ext: Unify regular and core-sched pick
task paths"). Update the outdated message.
Signed-off-by: Honglei Wang <jameshongleiwang@126.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
syzbot found that slhc_remember() was missing checks against
malicious packets [1].
slhc_remember() only checked the size of the packet was at least 20,
which is not good enough.
We need to make sure the packet includes the IPv4 and TCP header
that are supposed to be carried.
Add iph and th pointers to make the code more readable.
[1]
BUG: KMSAN: uninit-value in slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666
slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666
ppp_receive_nonmp_frame+0xe45/0x35e0 drivers/net/ppp/ppp_generic.c:2455
ppp_receive_frame drivers/net/ppp/ppp_generic.c:2372 [inline]
ppp_do_recv+0x65f/0x40d0 drivers/net/ppp/ppp_generic.c:2212
ppp_input+0x7dc/0xe60 drivers/net/ppp/ppp_generic.c:2327
pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379
sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113
__release_sock+0x1da/0x330 net/core/sock.c:3072
release_sock+0x6b/0x250 net/core/sock.c:3626
pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:744
____sys_sendmsg+0x903/0xb60 net/socket.c:2602
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656
__sys_sendmmsg+0x3c1/0x960 net/socket.c:2742
__do_sys_sendmmsg net/socket.c:2771 [inline]
__se_sys_sendmmsg net/socket.c:2768 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768
x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4091 [inline]
slab_alloc_node mm/slub.c:4134 [inline]
kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587
__alloc_skb+0x363/0x7b0 net/core/skbuff.c:678
alloc_skb include/linux/skbuff.h:1322 [inline]
sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732
pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:744
____sys_sendmsg+0x903/0xb60 net/socket.c:2602
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656
__sys_sendmmsg+0x3c1/0x960 net/socket.c:2742
__do_sys_sendmmsg net/socket.c:2771 [inline]
__se_sys_sendmmsg net/socket.c:2768 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768
x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 0 UID: 0 PID: 5460 Comm: syz.2.33 Not tainted 6.12.0-rc2-syzkaller-00006-g87d6aab2389e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Fixes: b5451d783ade ("slip: Move the SLIP drivers")
Reported-by: syzbot+2ada1bc857496353be5a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/670646db.050a0220.3f80e.0027.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241009091132.2136321-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric report a panic on IPPROTO_SMC, and give the facts
that when INET_PROTOSW_ICSK was set, icsk->icsk_sync_mss must be set too.
Bug: Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
Mem abort info:
ESR = 0x0000000086000005
EC = 0x21: IABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
user pgtable: 4k pages, 48-bit VAs, pgdp=00000001195d1000
[0000000000000000] pgd=0800000109c46003, p4d=0800000109c46003,
pud=0000000000000000
Internal error: Oops: 0000000086000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 UID: 0 PID: 8037 Comm: syz.3.265 Not tainted
6.11.0-rc7-syzkaller-g5f5673607153 #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 08/06/2024
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : 0x0
lr : cipso_v4_sock_setattr+0x2a8/0x3c0 net/ipv4/cipso_ipv4.c:1910
sp : ffff80009b887a90
x29: ffff80009b887aa0 x28: ffff80008db94050 x27: 0000000000000000
x26: 1fffe0001aa6f5b3 x25: dfff800000000000 x24: ffff0000db75da00
x23: 0000000000000000 x22: ffff0000d8b78518 x21: 0000000000000000
x20: ffff0000d537ad80 x19: ffff0000d8b78000 x18: 1fffe000366d79ee
x17: ffff8000800614a8 x16: ffff800080569b84 x15: 0000000000000001
x14: 000000008b336894 x13: 00000000cd96feaa x12: 0000000000000003
x11: 0000000000040000 x10: 00000000000020a3 x9 : 1fffe0001b16f0f1
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : 0000000000000001 x3 : 0000000000000000
x2 : 0000000000000002 x1 : 0000000000000000 x0 : ffff0000d8b78000
Call trace:
0x0
netlbl_sock_setattr+0x2e4/0x338 net/netlabel/netlabel_kapi.c:1000
smack_netlbl_add+0xa4/0x154 security/smack/smack_lsm.c:2593
smack_socket_post_create+0xa8/0x14c security/smack/smack_lsm.c:2973
security_socket_post_create+0x94/0xd4 security/security.c:4425
__sock_create+0x4c8/0x884 net/socket.c:1587
sock_create net/socket.c:1622 [inline]
__sys_socket_create net/socket.c:1659 [inline]
__sys_socket+0x134/0x340 net/socket.c:1706
__do_sys_socket net/socket.c:1720 [inline]
__se_sys_socket net/socket.c:1718 [inline]
__arm64_sys_socket+0x7c/0x94 net/socket.c:1718
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
Code: ???????? ???????? ???????? ???????? (????????)
---[ end trace 0000000000000000 ]---
This patch add a toy implementation that performs a simple return to
prevent such panic. This is because MSS can be set in sock_create_kern
or smc_setsockopt, similar to how it's done in AF_SMC. However, for
AF_SMC, there is currently no way to synchronize MSS within
__sys_connect_file. This toy implementation lays the groundwork for us
to support such feature for IPPROTO_SMC in the future.
Fixes: d25a92ccae6b ("net/smc: Introduce IPPROTO_SMC")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://patch.msgid.link/1728456916-67035-1-git-send-email-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported an issue in ppp_async_encode() [1]
In this case, pppoe_sendmsg() is called with a zero size.
Then ppp_async_encode() is called with an empty skb.
BUG: KMSAN: uninit-value in ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline]
BUG: KMSAN: uninit-value in ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675
ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline]
ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675
ppp_async_send+0x130/0x1b0 drivers/net/ppp/ppp_async.c:634
ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2280 [inline]
ppp_input+0x1f1/0xe60 drivers/net/ppp/ppp_generic.c:2304
pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379
sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113
__release_sock+0x1da/0x330 net/core/sock.c:3072
release_sock+0x6b/0x250 net/core/sock.c:3626
pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:744
____sys_sendmsg+0x903/0xb60 net/socket.c:2602
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656
__sys_sendmmsg+0x3c1/0x960 net/socket.c:2742
__do_sys_sendmmsg net/socket.c:2771 [inline]
__se_sys_sendmmsg net/socket.c:2768 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768
x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4092 [inline]
slab_alloc_node mm/slub.c:4135 [inline]
kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4187
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587
__alloc_skb+0x363/0x7b0 net/core/skbuff.c:678
alloc_skb include/linux/skbuff.h:1322 [inline]
sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732
pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:744
____sys_sendmsg+0x903/0xb60 net/socket.c:2602
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656
__sys_sendmmsg+0x3c1/0x960 net/socket.c:2742
__do_sys_sendmmsg net/socket.c:2771 [inline]
__se_sys_sendmmsg net/socket.c:2768 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768
x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 1 UID: 0 PID: 5411 Comm: syz.1.14 Not tainted 6.12.0-rc1-syzkaller-00165-g360c1f1f24c6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+1d121645899e7692f92a@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241009185802.3763282-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The purpose of this section is to document what is the current practice
regarding clean-up patches which address checkpatch warnings and similar
problems. I feel there is a value in having this documented so others
can easily refer to it.
Clearly this topic is subjective. And to some extent the current
practice discourages a wider range of patches than is described here.
But I feel it is best to start somewhere, with the most well established
part of the current practice.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241009-doc-mc-clean-v2-1-e637b665fa81@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When building for the UM arch and neither INDIRECT_IOMEM=y, nor
HAS_IOMEM=y is selected, it will fall back to the implementations from
asm-generic/io.h for IO memcpy. But these fall-back functions just do a
memcpy. So, instead of depending on UML, add dependency on 'HAS_IOMEM ||
INDIRECT_IOMEM'.
Reviewed-by: Yann Sionneau <ysionneau@kalrayinc.com>
Signed-off-by: Julian Vetter <jvetter@kalrayinc.com>
Link: https://patch.msgid.link/20241010124601.700528-1-jvetter@kalrayinc.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Kuniyuki Iwashima says:
====================
rtnetlink: Handle error of rtnl_register_module().
While converting phonet to per-netns RTNL, I found a weird comment
/* Further rtnl_register_module() cannot fail */
that was true but no longer true after commit addf9b90de22 ("net:
rtnetlink: use rcu to free rtnl message handlers").
Many callers of rtnl_register_module() just ignore the returned
value but should handle them properly.
This series introduces two helpers, rtnl_register_many() and
rtnl_unregister_many(), to do that easily and fix such callers.
All rtnl_register() and rtnl_register_module() will be converted
to _many() variant and some rtnl_lock() will be saved in _many()
later in net-next.
Changes:
v4:
* Add more context in changelog of each patch
v3: https://lore.kernel.org/all/20241007124459.5727-1-kuniyu@amazon.com/
* Move module *owner to struct rtnl_msg_handler
* Make struct rtnl_msg_handler args/vars const
* Update mctp goto labels
v2: https://lore.kernel.org/netdev/20241004222358.79129-1-kuniyu@amazon.com/
* Remove __exit from mctp_neigh_exit().
v1: https://lore.kernel.org/netdev/20241003205725.5612-1-kuniyu@amazon.com/
====================
Link: https://patch.msgid.link/20241008184737.9619-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Before commit addf9b90de22 ("net: rtnetlink: use rcu to free rtnl
message handlers"), once the first rtnl_register_module() allocated
rtnl_msg_handlers[PF_PHONET], the following calls never failed.
However, after the commit, rtnl_register_module() could fail silently
to allocate rtnl_msg_handlers[PF_PHONET][msgtype] and requires error
handling for each call.
Handling the error allows users to view a module as an all-or-nothing
thing in terms of the rtnetlink functionality. This prevents syzkaller
from reporting spurious errors from its tests, where OOM often occurs
and module is automatically loaded.
Let's use rtnl_register_many() to handle the errors easily.
Fixes: addf9b90de22 ("net: rtnetlink: use rcu to free rtnl message handlers")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Rémi Denis-Courmont <courmisch@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since introduced, mpls_init() has been ignoring the returned
value of rtnl_register_module(), which could fail silently.
Handling the error allows users to view a module as an all-or-nothing
thing in terms of the rtnetlink functionality. This prevents syzkaller
from reporting spurious errors from its tests, where OOM often occurs
and module is automatically loaded.
Let's handle the errors by rtnl_register_many().
Fixes: 03c0566542f4 ("mpls: Netlink commands to add, remove, and dump routes")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since introduced, mctp has been ignoring the returned value of
rtnl_register_module(), which could fail silently.
Handling the error allows users to view a module as an all-or-nothing
thing in terms of the rtnetlink functionality. This prevents syzkaller
from reporting spurious errors from its tests, where OOM often occurs
and module is automatically loaded.
Let's handle the errors by rtnl_register_many().
Fixes: 583be982d934 ("mctp: Add device handling and netlink interface")
Fixes: 831119f88781 ("mctp: Add neighbour netlink interface")
Fixes: 06d2f4c583a7 ("mctp: Add netlink route management")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since introduced, br_vlan_rtnl_init() has been ignoring the returned
value of rtnl_register_module(), which could fail silently.
Handling the error allows users to view a module as an all-or-nothing
thing in terms of the rtnetlink functionality. This prevents syzkaller
from reporting spurious errors from its tests, where OOM often occurs
and module is automatically loaded.
Let's handle the errors by rtnl_register_many().
Fixes: 8dcea187088b ("net: bridge: vlan: add rtm definitions and dump support")
Fixes: f26b296585dc ("net: bridge: vlan: add new rtm message support")
Fixes: adb3ce9bcb0f ("net: bridge: vlan: add del rtm message support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since introduced, vxlan_vnifilter_init() has been ignoring the
returned value of rtnl_register_module(), which could fail silently.
Handling the error allows users to view a module as an all-or-nothing
thing in terms of the rtnetlink functionality. This prevents syzkaller
from reporting spurious errors from its tests, where OOM often occurs
and module is automatically loaded.
Let's handle the errors by rtnl_register_many().
Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Before commit addf9b90de22 ("net: rtnetlink: use rcu to free rtnl message
handlers"), once rtnl_msg_handlers[protocol] was allocated, the following
rtnl_register_module() for the same protocol never failed.
However, after the commit, rtnl_msg_handler[protocol][msgtype] needs to
be allocated in each rtnl_register_module(), so each call could fail.
Many callers of rtnl_register_module() do not handle the returned error,
and we need to add many error handlings.
To handle that easily, let's add wrapper functions for bulk registration
of rtnetlink message handlers.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The parameters for the diag 0x258 are real addresses, not virtual, but
KVM was using them as virtual addresses. This only happened to work, since
the Linux kernel as a guest used to have a 1:1 mapping for physical vs
virtual addresses.
Fix KVM so that it correctly uses the addresses as real addresses.
Cc: stable@vger.kernel.org
Fixes: 8ae04b8f500b ("KVM: s390: Guest's memory access functions get access registers")
Suggested-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240917151904.74314-3-nrb@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Previously, access_guest_page() did not check whether the given guest
address is inside of a memslot. This is not a problem, since
kvm_write_guest_page/kvm_read_guest_page return -EFAULT in this case.
However, -EFAULT is also returned when copy_to/from_user fails.
When emulating a guest instruction, the address being outside a memslot
usually means that an addressing exception should be injected into the
guest.
Failure in copy_to/from_user however indicates that something is wrong
in userspace and hence should be handled there.
To be able to distinguish these two cases, return PGM_ADDRESSING in
access_guest_page() when the guest address is outside guest memory. In
access_guest_real(), populate vcpu->arch.pgm.code such that
kvm_s390_inject_prog_cond() can be used in the caller for injecting into
the guest (if applicable).
Since this adds a new return value to access_guest_page(), we need to make
sure that other callers are not confused by the new positive return value.
There are the following users of access_guest_page():
- access_guest_with_key() does the checking itself (in
guest_range_to_gpas()), so this case should never happen. Even if, the
handling is set up properly.
- access_guest_real() just passes the return code to its callers, which
are:
- read_guest_real() - see below
- write_guest_real() - see below
There are the following users of read_guest_real():
- ar_translation() in gaccess.c which already returns PGM_*
- setup_apcb10(), setup_apcb00(), setup_apcb11() in vsie.c which always
return -EFAULT on read_guest_read() nonzero return - no change
- shadow_crycb(), handle_stfle() always present this as validity, this
could be handled better but doesn't change current behaviour - no change
There are the following users of write_guest_real():
- kvm_s390_store_status_unloaded() always returns -EFAULT on
write_guest_real() failure.
Fixes: 2293897805c2 ("KVM: s390: add architecture compliant guest access functions")
Cc: stable@vger.kernel.org
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240917151904.74314-2-nrb@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
A crypto card comes in 3 flavors: accelerator, CCA co-processor or
EP11 co-processor. Within a protected execution environment only the
accelerator and EP11 co-processor is supported. However, it is
possible to set up a KVM guest with a CCA card and run it as a
protected execution guest. There is nothing at the host side which
prevents this. Within such a guest, a CCA card is shown as "illicit"
and you can't do anything with such a crypto card.
Regardless of the unsupported CCA card within a protected execution
guest there are a couple of user space applications which
unconditional try to run crypto requests to the zcrypt device
driver. There was a bug within the AP bus code which allowed such a
request to be forwarded to a CCA card where it is finally
rejected and the driver reacts with -ENODEV but also triggers an AP
bus scan. Together with a retry loop this caused some kind of "hang"
of the KVM guest. On startup it caused timeouts and finally led the
KVM guest startup fail. Fix that by closing the gap and make sure a
CCA card is not usable within a protected execution environment.
Another behavior within an protected execution environment with CCA
cards was that the se_bind and se_associate AP queue sysfs attributes
where shown. The implementation unconditional always added these
attributes. Fix that by checking if the card mode is supported within
a protected execution environment and only if valid, add the attribute
group.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The Linux implementation of PCI error recovery for s390 was based on the
understanding that firmware error recovery is a two step process with an
optional initial error event to indicate the cause of the error if known
followed by either error event 0x3A (Success) or 0x3B (Failure) to
indicate whether firmware was able to recover. While this has been the
case in testing and the error cases seen in the wild it turns out this
is not correct. Instead firmware only generates 0x3A for some error and
service scenarios and expects the OS to perform recovery for all PCI
events codes except for those indicating permanent error (0x3B, 0x40)
and those indicating errors on the function measurement block (0x2A,
0x2B, 0x2C). Align Linux behavior with these expectations.
Fixes: 4cdf2f4e24ff ("s390/pci: implement minimal PCI error recovery")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The Line6 driver source code files contain an outdated email address of the
original author. This patch updates the contact information.
Signed-off-by: Markus Grabner <line6@grabner-graz.at>
Link: https://patch.msgid.link/20241009194251.15662-1-line6@grabner-graz.at
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit adding support for multiple control interfaces expanded struct
snd_usb_power_domain with pointer to control interface for proper control
message routing but missed one initialization point of this structure,
which has left new field with NULL value.
Standard mandates that each device has at least one control interface and
code responsible for power domain does not check for NULL values when
querying for control interface. This caused some USB devices to crash
the kernel.
Fixes: 6aa8700150f7 ("ALSA: usb-audio: Support multiple control interfaces")
Signed-off-by: Karol Kosik <k.kosik@outlook.com>
Link: https://patch.msgid.link/AS8P190MB1285B563C6B5394DB274813FEC782@AS8P190MB1285.EURP190.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The dev_pm_domain_attach|detach_list() functions are not resource managed,
hence they should not use devm_* helpers to manage allocation/freeing of
data. Let's fix this by converting to the traditional alloc/free functions.
Fixes: 161e16a5e50a ("PM: domains: Add helper functions to attach/detach multiple PM domains")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20241002122232.194245-3-ulf.hansson@linaro.org
|
|
This reverts commit f790b5c09665cab0d51dfcc84832d79d2b1e6c0e.
The reverted commit was not ready to be applied due to dependency on other
OPP/pmdomain changes that didn't make it for the last release cycle. Let's
revert it to fix the behaviour.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20241002122232.194245-2-ulf.hansson@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Restrict xtables extensions to families that are safe, syzbot found
a way to combine ebtables with extensions that are never used by
userspace tools. From Florian Westphal.
2) Set l3mdev inconditionally whenever possible in nft_fib to fix lookup
mismatch, also from Florian.
netfilter pull request 24-10-09
* tag 'nf-24-10-09' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: conntrack_vrf.sh: add fib test case
netfilter: fib: check correct rtable in vrf setups
netfilter: xtables: avoid NFPROTO_UNSPEC where needed
====================
Link: https://patch.msgid.link/20241009213858.3565808-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
While working with the T-Head 1520 LicheePi4A SoC, certain conditions
arose that allowed me to reproduce a race issue in the sdhci code.
To reproduce the bug, you need to enable the sdio1 controller in the
device tree file
`arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi` as follows:
&sdio1 {
bus-width = <4>;
max-frequency = <100000000>;
no-sd;
no-mmc;
broken-cd;
cap-sd-highspeed;
post-power-on-delay-ms = <50>;
status = "okay";
wakeup-source;
keep-power-in-suspend;
};
When resetting the SoC using the reset button, the following messages
appear in the dmesg log:
[ 8.164898] mmc2: Got command interrupt 0x00000001 even though no
command operation was in progress.
[ 8.174054] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 8.180503] mmc2: sdhci: Sys addr: 0x00000000 | Version: 0x00000005
[ 8.186950] mmc2: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[ 8.193395] mmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[ 8.199841] mmc2: sdhci: Present: 0x03da0000 | Host ctl: 0x00000000
[ 8.206287] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 8.212733] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x0000decf
[ 8.219178] mmc2: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
[ 8.225622] mmc2: sdhci: Int enab: 0x00ff1003 | Sig enab: 0x00ff1003
[ 8.232068] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 8.238513] mmc2: sdhci: Caps: 0x3f69c881 | Caps_1: 0x08008177
[ 8.244959] mmc2: sdhci: Cmd: 0x00000502 | Max curr: 0x00191919
[ 8.254115] mmc2: sdhci: Resp[0]: 0x00001009 | Resp[1]: 0x00000000
[ 8.260561] mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 8.267005] mmc2: sdhci: Host ctl2: 0x00001000
[ 8.271453] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr:
0x0000000000000000
[ 8.278594] mmc2: sdhci: ============================================
I also enabled some traces to better understand the problem:
kworker/3:1-62 [003] ..... 8.163538: mmc_request_start:
mmc2: start struct mmc_request[000000000d30cc0c]: cmd_opcode=5
cmd_arg=0x0 cmd_flags=0x2e1 cmd_retries=0 stop_opcode=0 stop_arg=0x0
stop_flags=0x0 stop_retries=0 sbc_opcode=0 sbc_arg=0x0 sbc_flags=0x0
sbc_retires=0 blocks=0 block_size=0 blk_addr=0 data_flags=0x0 tag=0
can_retune=0 doing_retune=0 retune_now=0 need_retune=0 hold_retune=1
retune_period=0
<idle>-0 [000] d.h2. 8.164816: sdhci_cmd_irq:
hw_name=ffe70a0000.mmc quirks=0x2008008 quirks2=0x8 intmask=0x10000
intmask_p=0x18000
irq/24-mmc2-96 [000] ..... 8.164840: sdhci_thread_irq:
msg=
irq/24-mmc2-96 [000] d.h2. 8.164896: sdhci_cmd_irq:
hw_name=ffe70a0000.mmc quirks=0x2008008 quirks2=0x8 intmask=0x1
intmask_p=0x1
irq/24-mmc2-96 [000] ..... 8.285142: mmc_request_done:
mmc2: end struct mmc_request[000000000d30cc0c]: cmd_opcode=5
cmd_err=-110 cmd_resp=0x0 0x0 0x0 0x0 cmd_retries=0 stop_opcode=0
stop_err=0 stop_resp=0x0 0x0 0x0 0x0 stop_retries=0 sbc_opcode=0
sbc_err=0 sbc_resp=0x0 0x0 0x0 0x0 sbc_retries=0 bytes_xfered=0
data_err=0 tag=0 can_retune=0 doing_retune=0 retune_now=0 need_retune=0
hold_retune=1 retune_period=0
Here's what happens: the __mmc_start_request function is called with
opcode 5. Since the power to the Wi-Fi card, which resides on this SDIO
bus, is initially off after the reset, an interrupt SDHCI_INT_TIMEOUT is
triggered. Immediately after that, a second interrupt SDHCI_INT_RESPONSE
is triggered. Depending on the exact timing, these conditions can
trigger the following race problem:
1) The sdhci_cmd_irq top half handles the command as an error. It sets
host->cmd to NULL and host->pending_reset to true.
2) The sdhci_thread_irq bottom half is scheduled next and executes faster
than the second interrupt handler for SDHCI_INT_RESPONSE. It clears
host->pending_reset before the SDHCI_INT_RESPONSE handler runs.
3) The pending interrupt SDHCI_INT_RESPONSE handler gets called, triggering
a code path that prints: "mmc2: Got command interrupt 0x00000001 even
though no command operation was in progress."
To solve this issue, we need to clear pending interrupts when resetting
host->pending_reset. This ensures that after sdhci_threaded_irq restores
interrupts, there are no pending stale interrupts.
The behavior observed here is non-compliant with the SDHCI standard.
Place the code in the sdhci-of-dwcmshc driver to account for a
hardware-specific quirk instead of the core SDHCI code.
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 43658a542ebf ("mmc: sdhci-of-dwcmshc: Add support for T-Head TH1520")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241008100327.4108895-1-m.wilczynski@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
dst_entries_add() uses per-cpu data that might be freed at netns
dismantle from ip6_route_net_exit() calling dst_entries_destroy()
Before ip6_route_net_exit() can be called, we release all
the dsts associated with this netns, via calls to dst_release(),
which waits an rcu grace period before calling dst_destroy()
dst_entries_add() use in dst_destroy() is racy, because
dst_entries_destroy() could have been called already.
Decrementing the number of dsts must happen sooner.
Notes:
1) in CONFIG_XFRM case, dst_destroy() can call
dst_release_immediate(child), this might also cause UAF
if the child does not have DST_NOCOUNT set.
IPSEC maintainers might take a look and see how to address this.
2) There is also discussion about removing this count of dst,
which might happen in future kernels.
Fixes: f88649721268 ("ipv4: fix dst race in sk_dst_get()")
Closes: https://lore.kernel.org/lkml/CANn89iLCCGsP7SFn9HKpvnKu96Td4KD08xf7aGtiYgZnkjaL=w@mail.gmail.com/T/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20241008143110.1064899-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Disable cesa hash algorithms by lowering the priority because they
appear to be broken when invoked in parallel. This allows them to
still be tested for debugging purposes.
Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The previous patch removed the ENOENT warning at the point of
allocation, but the overall self-test warning is still there.
Fix all of them by returning zero as the test result. This is
safe because if the algorithm has gone away, then it cannot be
marked as tested.
Fixes: 4eded6d14f5b ("crypto: testmgr - Hide ENOENT errors")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As algorithm testing is carried out without holding the main crypto
lock, it is always possible for the algorithm to go away during the
test.
So before crypto_alg_tested updates the status of the tested alg,
it checks whether it's still on the list of all algorithms. This
is inaccurate because it may be off the main list but still on the
list of algorithms to be removed.
Updating the algorithm status is safe per se as the larval still
holds a reference to it. However, killing spawns of other algorithms
that are of lower priority is clearly a deficiency as it adds
unnecessary churn.
Fix the test by checking whether the algorithm is dead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Modify the entry for the ahci_platform driver (LIBATA SATA
AHCI PLATFORM devices support) in the MAINTAINERS file to remove Jens
as maintainer. Also remove all references to Jens block tree from the
various LIBATA driver entries as the tree reference for these is defined
by the LIBATA SUBSYSTEM entry.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20241010020117.416333-1-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Since X86_FEATURE_ENTRY_IBPB will invalidate all harmful predictions
with IBPB, no software-based untraining of returns is needed anymore.
Currently, this change affects retbleed and SRSO mitigations so if
either of the mitigations is doing IBPB and the other one does the
software sequence, the latter is not needed anymore.
[ bp: Massage commit message. ]
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Cc: <stable@kernel.org>
|
|
entry_ibpb() is designed to follow Intel's IBPB specification regardless
of CPU. This includes invalidating RSB entries.
Hence, if IBPB on VMEXIT has been selected, entry_ibpb() as part of the
RET untraining in the VMEXIT path will take care of all BTB and RSB
clearing so there's no need to explicitly fill the RSB anymore.
[ bp: Massage commit message. ]
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Cc: <stable@kernel.org>
|
|
entry_ibpb() should invalidate all indirect predictions, including return
target predictions. Not all IBPB implementations do this, in which case the
fallback is RSB filling.
Prevent SRSO-style hijacks of return predictions following IBPB, as the return
target predictor can be corrupted before the IBPB completes.
[ bp: Massage. ]
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
|
|
Set this flag if the CPU has an IBPB implementation that does not
invalidate return target predictions. Zen generations < 4 do not flush
the RSB when executing an IBPB and this bug flag denotes that.
[ bp: Massage. ]
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
|
