summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-13scsi: megaraid_sas: driver version upgradeShivasharan S
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: Change RAID_1_10_RMW_CMDS to RAID_1_PEER_CMDS and set ↵Shivasharan S
value to 2 For RAID1 FastPath writes, driver needs to allocate extra commands internally to accommodate for the extra peer command being sent. Currently driver is allocating 2 extra commands for each but only one extra command is necessary. Set RAID_1_10_RMW_CMDS to 2 and also change macro name to RAID_1_PEER_CMDS. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: Indentation and smatch warning fixesShivasharan S
Fix indentation issues and smatch warning reported by Dan Carpenter for previous series as discussed below. http://www.spinics.net/lists/linux-scsi/msg103635.html http://www.spinics.net/lists/linux-scsi/msg103603.html Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Sasikumar Chandrasekaran <sasikumar.pc@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: Cleanup VD_EXT_DEBUG and SPAN_DEBUG related debug printsShivasharan S
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: Increase internal command poolShivasharan S
Fix - increase internal command pool to 8. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: Use synchronize_irq to wait for IRQs to completeShivasharan S
FIX - Do not use random delay to synchronize with IRQ. Use kernel API. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: Bail out the driver load if ld_list_query failsShivasharan S
Error handling: Bail out the driver load if key FW cmds (LD_LIST) are not return successful. Clean up error handling in megasas_init_fw. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: Change build_mpt_mfi_pass_thru to return voidShivasharan S
Code refactoring to build_mpt_mfi_pass_thru to return void. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: During OCR, if get_ctrl_info fails do not continue with OCRShivasharan S
Error handling: If controller reset is not able to recover, kill HBA and quit immediately. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: Do not set fp_possible if TM capable for non-RW syspdIO, ↵Shivasharan S
change fp_possible to bool FIX - firmware wants non-RW SYS PD IOs to avoid FastPath for better tracking and other functionalities if the device is task management capable. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: Remove unused pd_index from megasas_build_ld_nonrw_fusionShivasharan S
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: megasas_return_cmd does not memset IO frame to zeroShivasharan S
Memset the IO frame to zero after release. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: max_fw_cmds are decremented twice, remove duplicateShivasharan S
Fix to account for the reply_q_sz not exceeding the maximum commands that the firmware can support, instance->max_fw_cmds is already decremented in megasas_fusion_update_can_queue(). Remove the extra decrement logic in code. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: update can_queue only if the new value is lessShivasharan S
Minor Optimization: No need to update HBA can_queue value if the current max FW commands is equal to earlier value. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: Change max_cmd from u32 to u16 in all functionsShivasharan S
Since maximum supported FW commands are all defined as u16, change all local variables referring to max_cmd from u32 to u16. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: set pd_after_lb from MR_BuildRaidContext and initialize ↵Shivasharan S
pDevHandle to MR_DEVHANDLE_INVALID Issue is limited for Syncro firmware where pd_after_lb is not set but is accidentally used. Not a functional issue, but results in low performance due to improper load balancing between two LUNs. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: latest controller OCR capability from FW before sending ↵Shivasharan S
shutdown DCMD Fetch the latest controller OCR capability from FW before sending MR_DCMD_CTRL_SHUTDOWN When application sends a shutdown DCMD (MR_DCMD_CTRL_SHUTDOWN), driver will fetch latest controller information from firmware. This is to ensure that driver always has latest OCR capability of controller before sending the DCMD. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: avoid unaligned access in ioctl pathShivasharan S
Fix kernel warning for accessing unaligned memory access in driver. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: big endian support changesShivasharan S
Fix endiannes fixes for Ventura specific. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: Big endian RDPQ mode fixShivasharan S
Fix if RDPQ mode enabled MR FW is deployed on big endian host machine, driver does not setup reply address correctly. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: MR_TargetIdToLdGet u8 to u16 and avoid invalid raid-map ↵Shivasharan S
access Change MR_TargetIdToLdGet return type from u8 to u16. ld id range check is added at two places in this patch - @megasas_build_ldio_fusion and @megasas_build_ld_nonrw_fusion. Previous driver code used different data type for lds TargetId returned from MR_TargetIdToLdGet. Prior to this change, above two functions was safeguarded due to function always return u8 and maximum value of ld id returned was 255. In below check, fw_supported_vd_count as of today is 64 or 256 and valid range to support is either 0-63 or 0-255. Ideally want to filter accessing raid map for ld ids which are not valid. With the u16 change, invalid ld id value is 0xFFFF and we will see kernel panic due to random memory access in MR_LdRaidGet. The changes will ensure we do not call MR_LdRaidGet if ld id is beyond size of ldSpanMap array. if (ld < instance->fw_supported_vd_count) >From firmware perspective,ld id 0xFF is invalid and even though current driver code forward such command, firmware fails with target not available. ld target id issue occurs mainly whenever driver loops to populate raid map (ea. MR_ValidateMapInfo). These are the only two places where we may see out of range target ids and wants to protect raid map access based on range provided by Firmware API. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: In validate raid map, raid capability is not converted ↵Shivasharan S
to cpu format for all lds On a host, if an ld is deleted there is a hole in the ld array returned by the FW. But in MR_ValidateMapInfo we are not accounting for holes in the ld array and traverse only upto index num_lds. This patch takes care of converting the capability field of all the valid lds in the ld raid map. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: reduce size of fusion_context and use vmalloc if kmalloc ↵Shivasharan S
fails Currently fusion context has fixed array load_balance_info. Use dynamic allocation. In few places, driver do not want physically contigious memory. Attempt to use vmalloc if physical contiguous memory is not available. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: add print in device removal pathShivasharan S
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: enhance debug logs in OCR contextShivasharan S
Add additional logging from driver in OCR context. Add debug logs for partial completion of IOs is iodone context. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: set residual bytes count during IO completionShivasharan S
Fixing issue of not setting residual bytes correctly. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: raid 1 write performance for large ioShivasharan S
Avoid Host side PCI bandwidth bottleneck and hint FW to do Write buffering using RaidFlag MR_RAID_FLAGS_IO_SUB_TYPE_LDIO_BW_LIMIT. Once IO is landed in FW with MR_RAID_FLAGS_IO_SUB_TYPE_LDIO_BW_LIMIT, it will do single DMA from host and buffer the Write operation. On back end, FW will DMA same buffer to the Mirror and Data Arm. This will improve large block IO performance which bottleneck due to Host side PCI bandwidth limitation. Consistent ~4000MB T.P for 256K Block size is expected performance numbers. IOPS for small Block size should be on par with Disk performance. (E.g 42 SAS Disk in JBOD mode gives 3700MB T.P. Same Drive used in R1 WT mode, should give ~1800MB T.P) Using this patch 24 R1 VDs (HDD) gives below performance for Sequential Write. Without this patch, we cannot reach above 3200MB (Throughput is in MB.) Block Size 50% 256K and 50% 4K 100% 256K 4K 3100 2030 8K 3140 2740 16K 3140 3140 32K 3400 3240 64K 3500 3700 128K 3870 3870 256K 3920 3920 Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: NVME fast path io supportShivasharan S
This patch provide true fast path IO support. Driver creates PRP for NVME drives and send Fast Path for performance. Certain h/w requirement needs to be taken care in driver. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: NVME interface target prop addedShivasharan S
This patch fetch true values of NVME property from FW using New DCMD interface MR_DCMD_DEV_GET_TARGET_PROP Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: NVME Interface detection and prop settingsShivasharan S
Adding detection logic for NVME device attached behind Ventura controller. Driver set HostPageSize in IOC_INIT frame to inform about page size for NVME devices. Firmware reports NVME page size to the driver. PD INFO DCMD provide new interface type NVME_PD. Driver set property of NVME device. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: change issue_dcmd to return void from intShivasharan S
With the changes to remove checks for a valid request descriptor, issue_dcmd will now always return DCMD_SUCCESS. This patch changes return type of issue_dcmd to void and change all callers appropriately. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: megasas_get_request_descriptor always return valid descShivasharan S
No functional change. Code clean up. Removing error code which is not valid scenario. In megasas_get_request_descriptor we can remove the error handling which is not required. With fusion controllers, if there is a valid message frame available, we are guaranteed to get a corresponding request descriptor. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: Use DID_REQUEUEShivasharan S
Moving to use DID_REQUEUE return type for reliable unconditional retries. Driver wants unconditional re-queue, so replace DID_RESET with DID_REQUEUE Discussed below - https://www.spinics.net/lists/linux-scsi/msg102848.html Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: RAID map is accessed for SYS PDs when use_seqnum_jbod_fp ↵Shivasharan S
is not set Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: Refactor MEGASAS_IS_LOGICAL macro using sdevShivasharan S
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: 32 bit descriptor fire cmd optimizationShivasharan S
No functional change. Code refactor. megasas_fire_cmd_fusion can always use 32 bit descriptor write for ventura. No need to pass extra flag. Only IOC INIT required 64 bit Descriptor write. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: raid 1 fast path code optimizeShivasharan S
No functional change. Code refactor. Remove function megasas_fpio_to_ldio as we never require to convert fpio to ldio because of frame unavailability. Grab extra frame of raid 1 write fast path before it creates first frame as Fast Path. Removed is_raid_1_fp_write flag as raid 1 write fast path command is decided using r1_alt_dev_handle only. Move resetting megasas_cmd_fusion fields at common function megasas_return_cmd_fusion. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13scsi: megaraid_sas: cpu select rework.Shivasharan S
No functional change. Code refactor. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13Revert "scsi: megaraid_sas: Enable or Disable Fast path based on the PCI ↵Shivasharan S
Threshold Bandwidth" This reverts commit "3e5eadb1a881" ("scsi: megaraid_sas: Enable or Disable Fast path based on the PCI Threshold Bandwidth") This patch was aimed to increase performance of R1 Write operation for large IO size. Since this method used timer approach, it turn on/off fast path did not work as expected. Patch 0013 describes new algorithm and performance number. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-13mmc: queue: turn queue flags into boolsLinus Walleij
Instead of masking and setting two bits in the "flags" field for the mmc_queue, just use two bools named "suspended" and "new_request". The masking and setting would likely have race conditions anyways, it is better to use a simple member like this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: rename mmc_active to areqLinus Walleij
The mmc_active member of struct mmc_queue_req has a very confusing name: this is certainly not always "active", it is the asynchronous request associated by the mmc_queue_req but it is not guaranteed to be "active" in any sense, such as being running on the host. Simply rename this member to "areq". Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: refactor mmc_blk_rw_try_restart()Linus Walleij
The mmc_blk_rw_start_new() was named after the label inside mmc_blk_issue_rw_rq() but is really a confusing name for this function: what it does is to try to restart the latest issued command on the host and card of the current MMC queue. So rename it mmc_blk_rw_try_restart() that reflects what it is doing and at this point also refactore the function to treat the removed card as an exception and just exit if this happens and run on in the function if that is not happening. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: core: rename mmc_start_req() to *areq()Linus Walleij
With the coexisting __mmc_start_request(), mmc_start_request() and __mmc_start_req() it is a bit confusing that mmc_start_req() actually does not start a normal request, but an asynchronous request. Rename it to mmc_start_areq() to make it explicit what the function is doing, also fix the kerneldoc for this function while we're at it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: rename rqc and reqLinus Walleij
In the function mmc_blk_issue_rw_rq() the new request coming in from the block layer is called "rqc" and the old request that was potentially just returned back from the asynchronous mechanism is called "req". This is really confusing when trying to analyze and understand the code, it becomes a perceptual nightmare to me. Maybe others have better parserheads but it is not working for me. Rename "rqc" to "new_req" and "req" to "old_req" to reflect what is semantically going on into the syntax. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: block: inline the command abort and start new goto:sLinus Walleij
The goto statements sprinkled over the mmc_blk_issue_rw_rq() function has grown over the years and makes the code pretty hard to read. Inline the calls such that: goto cmd_abort; -> mmc_blk_rw_cmd_abort(card, req); mmc_blk_rw_start_new(mq, card, rqc); return; goto start_new_req; -> mmc_blk_rw_start_new(mq, card, rqc); return; After this it is more clear how we exit the do {} while loop in this function, and it gets possible to split the code apart. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: core: switch to ida_simple_ functions in block.cHeiner Kallweit
ida code in block.c can be significantly simplified by switching to the ida_simple_ functions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: host: omap_hsmmc: avoid possible overflow of timeout valueRavikumar Kattekola
Fixes: a45c6cb81647 ("[ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3") when using really large timeout (up to 4*60*1000 ms for bkops) there is a possibility of data overflow using unsigned int so use 64 bit unsigned long long. Signed-off-by: Ravikumar Kattekola <rk@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: host: omap_hsmmc: use generic_cmd6_time to program timeout value for CMD6Kishon Vijay Abraham I
commit e2bf08d643a244ccb ("omap_hsmmc: set a large data timeout for commands with busy signal") sets an arbitrary timeout value (100ms) for commands like CMD6 (MMC SWITCH). However extended CSD register defined in the eMMC standard has a field for GENERIC_CMD6_TIME which indicates the default maximum timeout for a SWITCH command. Use busy_timeout of cmd structure (populated with GENERIC_CMD6_TIME in the case of SWITCH command) to program the data timeout value in omap_hsmmc driver. SWITCH command to turn the cache on took more than 100ms to complete with MICRON eMMC card present in AM572x IDK REV 1.3A resulting in timeout and failed enumeration. It is fixed here by programming the timeout with the value advertised in GENERIC_CMD6_TIME. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Ravikumar Kattekola <rk@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: host: omap_hsmmc: reset cmd line on ceb errorRavikumar Kattekola
When CEB (command end bit error) occurs reset CMD line to avoid system ending up in erroneous state. While command line is reset for CTO and CCRC errors, it's not done for CEB error. Fix it here. Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Ravikumar Kattekola <rk@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13dt-bindings: mmc: sunxi: Document A64 eMMC compatibleMaxime Ripard
We introduced recently a new compatible to deal with the A64 eMMC controller, let's document its binding. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-12 13:17:50 +0000