summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-03-27net: bcmgenet: simplify bcmgenet_init_dma()Petri Gynther
Do the two kcalloc() calls first, before proceeding into Rx/Tx DMA init. Makes the error case handling much simpler. Signed-off-by: Petri Gynther <pgynther@google.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-27net: bcmgenet: modify Tx ring int_enable and int_disable vectorsPetri Gynther
Remove unnecessary function parameter priv. Use ring->priv instead. Signed-off-by: Petri Gynther <pgynther@google.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-27net: bcmgenet: remove priv->int0_mask and priv->int1_maskPetri Gynther
Remove unused priv->int0_mask and priv->int1_mask. Signed-off-by: Petri Gynther <pgynther@google.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-27Merge branch 'xgene-next'David S. Miller
Iyappan Subramanian says: ==================== drivers: net: xgene: Add separate tx completion ring SGMII based 1GbE and 10GbE interfaces support multiple interrupts. Adding separate tx completion descriptor ring and associating a dedicated irq for the TX completion. ==================== Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
2015-03-27drivers: net: xgene: Add separate tx completion ringIyappan Subramanian
- Added wrapper functions around napi_add, napi_del, napi_enable and napi_disable - Moved platform_get_irq function call after reading phy_mode - Associating the new irq to tx completion for the supported ethernet interfaces Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-27dtb: xgene: Add interrupt for Tx completionIyappan Subramanian
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-27Documentation: dts: xgene: Update interrupt field descriptionIyappan Subramanian
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-27libata: Blacklist queued TRIM on Samsung SSD 850 ProMartin K. Petersen
Blacklist queued TRIM on this drive for now. Reported-by: Stefan Keller <linux-list@zahlenfresser.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> CC: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27libata: Update Crucial/Micron blacklistMartin K. Petersen
Micron has released an updated firmware (MU02) for M510/M550/MX100 drives to fix the issues with queued TRIM. Queued TRIM remains broken on M500 but is working fine on later drives such as M600 and MX200. Tweak our blacklist to reflect the above. Link: https://bugzilla.kernel.org/show_bug.cgi?id=71371 Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27at86rf230: fix is_tx while error handlingAlexander Aring
This patch fix the error handling when is_tx is true. The error handling tries to get the transceiver into RX_AACK_ON mode then we need to be sure that is_tx is false. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-27at86rf230: remove unnecessary spinlockAlexander Aring
This spinlock isn't necessary because if we are in TX_ON/TX_ARET_ON state the transceiver can't be interrupted e.g. by receiving a frame when a SHR was detected. In this time the transceiver doesn't leave the TX_ON/TX_ARET_ON state until the tx complete irq change the state into RX_AACK_ON again. This means a receiving interrupt in state TX_ON/TX_ARET_ON can't happen and is_tx is protected by transceiver. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-27mac802154: cleanup concurrent checkAlexander Aring
This patch cleanups the checking of different mac phy depended values by handling depended mac settings per hw support flag in one condition. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-27drm/radeon: programm the VCE fw BAR as wellChristian König
Otherwise the VCE firmware needs to be in the first 256MB of VRAM. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-27drm/radeon: always dump the ring content if it's availableChristian König
Dumping is still possible if a ring isn't ready, only when it isn't allocated at all we need to abort here. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-27radeon: Do not directly dereference pointers to BIOS area.David Miller
Use readb() and memcpy_fromio() accessors instead. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-03-27drm/radeon/dpm: fix 120hz handling harderAlex Deucher
Need to expand the check to handle short circuiting if the selected state is the same as current state. bug: https://bugs.freedesktop.org/show_bug.cgi?id=87796 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-03-27drm/edid: set ELD for firmware and debugfs override EDIDsJani Nikula
If the user supplies EDID through firmware or debugfs override, the driver callbacks are bypassed and the connector ELD does not get updated, and audio fails. Set ELD for firmware and debugfs EDIDs too. There should be no harm in gratuitously doing this for non HDMI/DP connectors, as it's still up to the driver to use the ELD, if any. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82349 Reference: https://bugs.freedesktop.org/show_bug.cgi?id=80691 Reported-by: Emil <emilsvennesson@gmail.com> Reported-by: Rob Engle <grenoble@gmail.com> Tested-by: Jolan Luff <jolan@gormsby.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-27locks: fix file_lock deletion inside loopYan, Zheng
locks_delete_lock_ctx() is called inside the loop, so we should use list_for_each_entry_safe. Fixes: 8634b51f6ca2 (locks: convert lease handling to file_lock_context) Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
2015-03-27firmware: dmi_scan: Prevent dmi_num integer overflowJean Delvare
dmi_num is a u16, dmi_len is a u32, so this construct: dmi_num = dmi_len / 4; would result in an integer overflow for a DMI table larger than 256 kB. I've never see such a large table so far, but SMBIOS 3.0 makes it possible so maybe we'll see such tables in the future. So instead of faking a structure count when the entry point does not provide it, adjust the loop condition in dmi_table() to properly deal with the case where dmi_num is not set. This bug was introduced with the initial SMBIOS 3.0 support in commit fc43026278b2 ("dmi: add support for SMBIOS 3.0 64-bit entry point"). Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: <stable@vger.kernel.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2015-03-27gpio: syscon: reduce message level when direction reg offset not in dtGrygorii Strashko
Now GPIO syscon driver produces bunch of warnings during the boot of Kesytone 2 SoCs: gpio-syscon soc:keystone_dsp_gpio@02620240: can't read the dir register offset! gpio-syscon soc:keystone_dsp_gpio@2620244: can't read the dir register offset! This message unintentionally was added using dev_err(), but its actual log level is debug, because third cell of "ti,syscon-dev" is optional. Hence change it to dev_dbg() as it should be. This patch fixes commit: 5a3e3f8 ("gpio: syscon: retriave syscon node and regs offsets from dt") Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-27i40e: Bump version to 1.2.43Catherine Sullivan
Bump. Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-27i40evf: add FW version to ethtool infoMitch Williams
Customers reported that the firmware version information from i40evf is unlike that of ixgbevf and was causing problems with their scripts. To resolve this, populate the field to align with ixgbevf. Change-ID: I9f4e24f6a76cd819bbe07087aab2b74f715ec103 Reported-by: Sourav Chatterjee <sourav.chatterjee@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-27i40e: Increase PF reset max loop limitAkeem G Abodunrin
In some circumstances the firmware can take longer to be ready after a reset than we're currently waiting. This patch increases the polling loop limiter to much longer than expected. Change-ID: I4b2c4c100dfa4abb77d02e5ecdec1cdd253b8c7e Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-27i40evf: resequence close operationsMitch Williams
Call the netdev carrier off and TX disable functions first, before other shutdown operations. This stops the stack from hitting us with transmits while we're shutting down. Additionally, disable NAPI before disabling interrupts, or the interrupt might get re-enabled inappropriately. Finally, remove the call to netif_tx_stop_all_queues, as it is redundant - the call to netif_tx_disable already did the same thing. Change-ID: I8b2dd25231b82817746cc256234a5eeeb4abaccc Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-27i40evf: delay releasing ringsMitch Williams
When the VF interface is closed, we cannot immediately free our rings and RX buffers, because the hardware hasn't yet stopped accessing this memory. This shows up as a panic or memory corruption when the device is brought down while under heavy stress. To fix this, delay releasing resources until we receive acknowledgment from the PF driver that the rings have indeed been stopped. Because of this delay, we also need to check to make sure that all of our admin queue requests have been handled before allowing the device to be opened. Change-ID: I44edd35529ce2fa2a9512437a3a8e6f14ed8ed63 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-27Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/selinux ↵James Morris
into for-linus
2015-03-27watchdog: imgpdc: Fix default heartbeatJames Hogan
The IMG PDC watchdog driver heartbeat module parameter has no default so it is initialised to zero. This results in the following warning during probe: imgpdc-wdt 2006000.wdt: Initial timeout out of range! setting max timeout The module parameter description implies that the default value should be PDC_WDT_DEF_TIMEOUT, which isn't yet used, so initialise it to that. Also tweak the heartbeat module parameter description for consistency. Fixes: 93937669e9b5 ("watchdog: ImgTec PDC Watchdog Timer Driver") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: Naidu Tellapati <Naidu.Tellapati@imgtec.com> Cc: Jude Abraham <Jude.Abraham@imgtec.com> Cc: linux-watchdog@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-03-27watchdog: imgpdc: Fix probe NULL pointer dereferenceJames Hogan
The IMG PDC watchdog probe function calls pdc_wdt_stop() prior to watchdog_set_drvdata(), causing a NULL pointer dereference when pdc_wdt_stop() retrieves the struct pdc_wdt_dev pointer using watchdog_get_drvdata() and reads the register base address through it. Fix by moving the watchdog_set_drvdata() call earlier, to where various other pdc_wdt->wdt_dev fields are initialised. Fixes: 93937669e9b5 ("watchdog: ImgTec PDC Watchdog Timer Driver") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: Naidu Tellapati <Naidu.Tellapati@imgtec.com> Cc: Jude Abraham <Jude.Abraham@imgtec.com> Cc: linux-watchdog@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-03-27watchdog: mtk_wdt: signedness bug in mtk_wdt_start()Dan Carpenter
"ret" should be signed for the error handling to work correctly. This doesn't matter much in real life since mtk_wdt_set_timeout() always succeeds. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-03-27i40e/i40evf: implement KR2 supportJesse Brandeburg
The new devices need a new device ID some other defines to handle the new 20G speed for KR2. Change-ID: I03f717e364afe59657e8c9ce5ffaad856b4b21df Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-26tty: serial: fsl_lpuart: clear receive flag on FIFO flushStefan Agner
When the receiver was enabled during startup, a character could have been in the FIFO when the UART get initially used. The driver configures the (receive) watermark level, and flushes the FIFO. However, the receive flag (RDRF) could still be set at that stage (as mentioned in the register description of UARTx_RWFIFO). This leads to an interrupt which won't be handled properly in interrupt mode: The receive interrupt function lpuart_rxint checks the FIFO count, which is 0 at that point (due to the flush during initialization). The problem does not manifest when using DMA to receive characters. Fix this situation by explicitly read the status register, which leads to clearing of the RDRF flag. Due to the flush just after the status flag read, a explicit data read is not to required. Signed-off-by: Stefan Agner <stefan@agner.ch> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26tty: serial: fsl_lpuart: specify transmit FIFO sizeStefan Agner
Specify transmit FIFO size which might be different depending on LPUART instance. This makes sure uart_wait_until_sent in serial core getting called, which in turn waits and checks if the FIFO is really empty on shutdown by using the tx_empty callback. Without the call of this callback, the last several characters might not yet be transmitted when closing the serial port. This can be reproduced by simply using echo and redirect the output to a ttyLP device. Signed-off-by: Stefan Agner <stefan@agner.ch> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26serial: samsung: Clear operation mode on UART shutdownJavier Martinez Canillas
Exynos serial ports operate either in a DMA-based or interrupt-based modes. In DMA-based mode, the UART generates a transfer data request and a Transmission (Tx) interrupt in interrupt-based mode. The Tx IRQ is only unmasked in interrupt-based mode and it was done in s3c24xx_serial_start_tx(). Commit ba019a3e2ad5 ("serial: samsung: remove redundant interrupt enabling") removed the IRQ enable on that function since it is enabled when the mode is set in enable_tx_pio(). The problem is that enable_tx_pio() is only called if the port mode has not been set before but the mode was not cleared on .shutdown(). So if the UART was shutdown and then started up again, the mode set will remain and the Tx IRQ won't be unmasked. This caused a hang on at least Exynos5250, Exynos5420 and Exynos5800 when the system is rebooted or powered off. Fixes: ba019a3e2ad5 ("serial: samsung: remove redundant interrupt enabling") Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm refcounting fixes from Dave Airlie: "Here is the complete set of i915 bug/warn/refcounting fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Fixup legacy plane->crtc link for initial fb config drm/i915: Fix atomic state when reusing the firmware fb drm/i915: Keep ring->active_list and ring->requests_list consistent drm/i915: Don't try to reference the fb in get_initial_plane_config() drm: Fixup racy refcounting in plane_force_disable
2015-03-26Merge tag 'dm-4.0-fix-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fix from Mike Snitzer: "Fix DM core device cleanup regression -- due to a latent race that was exposed by the bdi changes that were introduced during the 4.0 merge" * tag 'dm-4.0-fix-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix add_disk() NULL pointer due to race with free_dev()
2015-03-26Merge tag 'linux-kselftest-4.0-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fix from Shuah Khan. * tag 'linux-kselftest-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: Fix build failures when invoked from kselftest target
2015-03-27Merge tag 'drm-intel-fixes-2015-03-26' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes This should cover the final warnings in -rc5 with two more backports from our development branch (drm-intel-next-queued). They're the ones from Daniel and Damien, with references to the reports. This is on top of drm-fixes because of the dependency on the two earlier fixes not yet in Linus' tree. There's an additional regression fix from Chris. * tag 'drm-intel-fixes-2015-03-26' of git://anongit.freedesktop.org/drm-intel: drm/i915: Fixup legacy plane->crtc link for initial fb config drm/i915: Fix atomic state when reusing the firmware fb drm/i915: Keep ring->active_list and ring->requests_list consistent
2015-03-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A couple of bug fixes for s390. The ftrace comile fix is quite large for a -rc6 release, but it would be nice to have it in 4.0" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/smp: reenable smt after resume s390/mm: limit STACK_RND_MASK for compat tasks s390/ftrace: fix compile error if CONFIG_KPROBES is disabled s390/cpum_sf: add diagnostic sampling event only if it is authorized
2015-03-26drm/i915: Fixup legacy plane->crtc link for initial fb configDaniel Vetter
This is a very similar bug in the load detect code fixed in commit 9128b040eb774e04bc23777b005ace2b66ab2a85 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Mar 3 17:31:21 2015 +0100 drm/i915: Fix modeset state confusion in the load detect code But this time around it was the initial fb code that forgot to update the plane->crtc pointer. Otherwise it's the exact same bug, with the exact same restrains (any set_config call/ioctl that doesn't disable the pipe papers over the bug for free, so fairly hard to hit in normal testing). So if you want the full explanation just go read that one over there - it's rather long ... Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reported-and-tested-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [Jani: backported to drm-intel-fixes for v4.0-rc] Reference: http://mid.gmane.org/CA+5PVA7ChbtJrknqws1qvZcbrg1CW2pQAFkSMURWWgyASRyGXg@mail.gmail.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-26drm/i915: Fix atomic state when reusing the firmware fbDamien Lespiau
Right now, we get a warning when taking over the firmware fb: [drm:drm_atomic_plane_check] FB set but no CRTC with the following backtrace: [<ffffffffa010339d>] drm_atomic_check_only+0x35d/0x510 [drm] [<ffffffffa0103567>] drm_atomic_commit+0x17/0x60 [drm] [<ffffffffa00a6ccd>] drm_atomic_helper_plane_set_property+0x8d/0xd0 [drm_kms_helper] [<ffffffffa00f1fed>] drm_mode_plane_set_obj_prop+0x2d/0x90 [drm] [<ffffffffa00a8a1b>] restore_fbdev_mode+0x6b/0xf0 [drm_kms_helper] [<ffffffffa00aa969>] drm_fb_helper_restore_fbdev_mode_unlocked+0x29/0x80 [drm_kms_helper] [<ffffffffa00aa9e2>] drm_fb_helper_set_par+0x22/0x50 [drm_kms_helper] [<ffffffffa050a71a>] intel_fbdev_set_par+0x1a/0x60 [i915] [<ffffffff813ad444>] fbcon_init+0x4f4/0x580 That's because we update the plane state with the fb from the firmware, but we never associate the plane to that CRTC. We don't quite have the full DRM take over from HW state just yet, so fake enough of the plane atomic state to pass the checks. v2: Fix the state on which we set the CRTC in the case we're sharing the initial fb with another pipe. (Matt) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [Jani: backported to drm-intel-fixes for v4.0-rc] Reference: http://mid.gmane.org/CA+5PVA7yXH=U757w8V=Zj2U1URG4nYNav20NpjtQ4svVueyPNw@mail.gmail.com Reference: http://lkml.kernel.org/r/CA+55aFweWR=nDzc2Y=rCtL_H8JfdprQiCimN5dwc+TgyD4Bjsg@mail.gmail.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-26NFC: nxp-nci_i2c: Add I2C support to NXP NCI driverClément Perrochaud
Add a module to the NXP-NCI driver to support NFC controllers with an I2C control interface, such as the NPC100. Signed-off-by: Clément Perrochaud <clement.perrochaud@effinnov.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-03-26netfilter: nf_tables: implement set transaction supportPatrick McHardy
Set elements are the last object type not supporting transaction support. Implement similar to the existing rule transactions: The global transaction counter keeps track of two generations, current and next. Each element contains a bitmask specifying in which generations it is inactive. New elements start out as inactive in the current generation and active in the next. On commit, the previous next generation becomes the current generation and the element becomes active. The bitmask is then cleared to indicate that the element is active in all future generations. If the transaction is aborted, the element is removed from the set before it becomes active. When removing an element, it gets marked as inactive in the next generation. On commit the next generation becomes active and the therefor the element inactive. It is then taken out of then set and released. On abort, the element is marked as active for the next generation again. Lookups ignore elements not active in the current generation. The current set types (hash/rbtree) both use a field in the extension area to store the generation mask. This (currently) does not require any additional memory since we have some free space in there. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-26netfilter: nf_tables: add transaction helper functionsPatrick McHardy
Add some helper functions for building the genmask as preparation for set transactions. Also add a little documentation how this stuff actually works. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-26netfilter: nf_tables: return set extensions from ->lookup()Patrick McHardy
Return the extension area from the ->lookup() function to allow to consolidate common actions. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-26netfilter: nf_tables: consolide set element destructionPatrick McHardy
With the conversion to set extensions, it is now possible to consolidate the different set element destruction functions. The set implementations' ->remove() functions are changed to only take the element out of their internal data structures. Elements will be freed in a batched fashion after the global transaction's completion RCU grace period. This reduces the amount of grace periods required for nft_hash from N to zero additional ones, additionally this guarantees that the set elements' extensions of all implementations can be used under RCU protection. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-26NFC: nxp-nci: Add support for NXP NCI chipsClément Perrochaud
Add support for NXP NCI NFC controllers such as the NPC100 or PN7150 families. Signed-off-by: Clément Perrochaud <clement.perrochaud@effinnov.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-03-26ALSA: hda - Add one more node in the EAPD supporting candidate listHui Wang
We have a HP machine which use the codec node 0x17 connecting the internal speaker, and from the node capability, we saw the EAPD, if we don't set the EAPD on for this node, the internal speaker can't output any sound. Cc: <stable@vger.kernel.org> BugLink: https://bugs.launchpad.net/bugs/1436745 Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-26clocksource/drivers/sun5i: Fix cpufreq interaction with sched_clock()Maxime Ripard
The sun5i timer is used as the sched-clock on certain systems, and ever since we started using cpufreq, the cpu clock (that is one of the timer's clock indirect parent) now changes as well, along with the actual sched_clock() rate. This is not accurate and not desirable. We can safely remove the sun5i sched-clock on those systems, since we have other reliable sched_clock() sources in the system. Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> [ Improved the changelog. ] Cc: richard@nod.at Link: http://lkml.kernel.org/r/1427362029-6511-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-26clocksource/drivers: Fix various !CONFIG_HAS_IOMEM build errorsRichard Weinberger
Fix !CONFIG_HAS_IOMEM related build failures in three clocksource drivers. The build failures have the pattern of: drivers/clocksource/sh_cmt.c: In function ‘sh_cmt_map_memory’: drivers/clocksource/sh_cmt.c:920:2: error: implicit declaration of function ‘ioremap_nocache’ [-Werror=implicit-function-declaration] cmt->mapbase = ioremap_nocache(mem->start, resource_size(mem)); Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: maxime.ripard@free-electrons.com Link: http://lkml.kernel.org/r/1427362029-6511-1-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-26NFC: nci: Add firmware download supportClément Perrochaud
A simple forward for firmware download (i.e. sending a new firmware to the NFC adapter) from the NFC subsystem to the drivers. This feature is required to update the firmware of NXP-NCI NFC controllers but can be used by any NCI driver. This feature has been present in the HCI subsystem since 9a695d. Signed-off-by: Clément Perrochaud <clement.perrochaud@effinnov.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-13 09:52:59 +0000