summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-10-03octeontx2-af: cn10k: mcs: Support for stats collectionGeetha sowjanya
Add mailbox messages to return the resource stats to the caller. Stats of SecY, SC and SAs as per the macsec standard, TCAM flow id hits/miss, mailbox to clear the stats are implemented. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Install a default TCAM for normal trafficGeetha sowjanya
Out of all the TCAM entries, reserve last TX and RX TCAM flow entry(low priority) so that normal traffic can be sent out and received. The traffic which needs macsec processing hits the high priority TCAM flows. Also install a FLR handler to free the allocated resources for PF/VF. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Manage the MCS block hardware resourcesGeetha sowjanya
To establish a macsec connection association netdev driver needs hardware resources like SecY, TCAM flows, SCs and SAs. This patch manages allocating, freeing and configuring those resources. AF consumers can request resources and configure them via these mailbox messages. AF can allocate until it runs out of hardware resources. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Add mailboxes for port related operationsGeetha sowjanya
There are set of configurations to be done at MCS port level like bringing port out of reset, making port as operational or bypass. This patch adds all the port related mailbox message handlers so that AF consumers can use them. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: Introduce driver for macsec block.Geetha sowjanya
CN10K-B and CNF10K-B has macsec block(MCS) to encrypt and decrypt packets at MAC level. This block is a global resource with hardware resources like SecYs, SCs and SAs and is in between NIX block and RPM LMAC. CN10K-B silicon has only one MCS block which receives packets from all LMACS whereas CNF10K-B has seven MCS blocks for seven LMACs. Both MCS blocks are similar in operation except for few register offsets and some configurations require writing to different registers. Those differences between IPs are handled using separate ops. This patch adds basic driver and does the initial hardware calibration and parser configuration. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03eth: sp7021: fix use after free bug in spl2sw_nvmem_get_mac_addressZheng Wang
This frees "mac" and tries to display its address as part of the error message on the next line. Swap the order. Fixes: fd3040b9394c ("net: ethernet: Add driver for Sunplus SP7021") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03Merge branch 'lan966x-police-mirroring'David S. Miller
Horatiu Vultur says: ==================== net: lan966x: Add police and mirror using tc-matchall Add tc-matchall classifier offload support both for ingress and egress. For this add support for the port police and port mirroring action support. Port police can happen only on ingress while port mirroring is supported both on ingress and egress ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: lan966x: Add port mirroring support using tc-matchallHoratiu Vultur
Add support for port mirroring. It is possible to mirror only one port at a time and it is possible to have both ingress and egress mirroring. Frames injected by the CPU don't get egress mirrored because they are bypassing the analyzer module. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: lan966x: Add port police support using tc-matchallHoratiu Vultur
Add support for port police. It is possible to police only on the ingress side. To be able to add police support also it was required to add tc-matchall classifier offload support. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: fec: using page pool to manage RX buffersShenwei Wang
This patch optimizes the RX buffer management by using the page pool. The purpose for this change is to prepare for the following XDP support. The current driver uses one frame per page for easy management. Added __maybe_unused attribute to the following functions to avoid the compiling warning. Those functions will be removed by a separate patch once this page pool solution is accepted. - fec_enet_new_rxbdp - fec_enet_copybreak The following are the comparing result between page pool implementation and the original implementation (non page pool). --- small packet (64 bytes) testing are almost the same --- no matter what the implementation is --- on both i.MX8 and i.MX6SX platforms. shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 -l 64 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 39728 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 37.0 MBytes 311 Mbits/sec [ 1] 1.0000-2.0000 sec 36.6 MBytes 307 Mbits/sec [ 1] 2.0000-3.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 3.0000-4.0000 sec 37.1 MBytes 312 Mbits/sec [ 1] 4.0000-5.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 5.0000-6.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 6.0000-7.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 7.0000-8.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 0.0000-8.0943 sec 299 MBytes 310 Mbits/sec --- Page Pool implementation on i.MX8 ---- shenwei@5810:~$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 43204 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 111 MBytes 933 Mbits/sec [ 1] 1.0000-2.0000 sec 111 MBytes 934 Mbits/sec [ 1] 2.0000-3.0000 sec 112 MBytes 935 Mbits/sec [ 1] 3.0000-4.0000 sec 111 MBytes 933 Mbits/sec [ 1] 4.0000-5.0000 sec 111 MBytes 934 Mbits/sec [ 1] 5.0000-6.0000 sec 111 MBytes 933 Mbits/sec [ 1] 6.0000-7.0000 sec 111 MBytes 931 Mbits/sec [ 1] 7.0000-8.0000 sec 112 MBytes 935 Mbits/sec [ 1] 8.0000-9.0000 sec 111 MBytes 933 Mbits/sec [ 1] 9.0000-10.0000 sec 112 MBytes 935 Mbits/sec [ 1] 0.0000-10.0077 sec 1.09 GBytes 933 Mbits/sec --- Non Page Pool implementation on i.MX8 ---- shenwei@5810:~$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 49154 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 104 MBytes 868 Mbits/sec [ 1] 1.0000-2.0000 sec 105 MBytes 878 Mbits/sec [ 1] 2.0000-3.0000 sec 105 MBytes 881 Mbits/sec [ 1] 3.0000-4.0000 sec 105 MBytes 879 Mbits/sec [ 1] 4.0000-5.0000 sec 105 MBytes 878 Mbits/sec [ 1] 5.0000-6.0000 sec 105 MBytes 878 Mbits/sec [ 1] 6.0000-7.0000 sec 104 MBytes 875 Mbits/sec [ 1] 7.0000-8.0000 sec 104 MBytes 875 Mbits/sec [ 1] 8.0000-9.0000 sec 104 MBytes 873 Mbits/sec [ 1] 9.0000-10.0000 sec 104 MBytes 875 Mbits/sec [ 1] 0.0000-10.0073 sec 1.02 GBytes 875 Mbits/sec --- Page Pool implementation on i.MX6SX ---- shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 57288 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 78.8 MBytes 661 Mbits/sec [ 1] 1.0000-2.0000 sec 82.5 MBytes 692 Mbits/sec [ 1] 2.0000-3.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 3.0000-4.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 4.0000-5.0000 sec 82.5 MBytes 692 Mbits/sec [ 1] 5.0000-6.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 6.0000-7.0000 sec 82.5 MBytes 692 Mbits/sec [ 1] 7.0000-8.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 8.0000-9.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 9.0000-9.5506 sec 45.0 MBytes 686 Mbits/sec [ 1] 0.0000-9.5506 sec 783 MBytes 688 Mbits/sec --- Non Page Pool implementation on i.MX6SX ---- shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 36486 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 70.5 MBytes 591 Mbits/sec [ 1] 1.0000-2.0000 sec 64.5 MBytes 541 Mbits/sec [ 1] 2.0000-3.0000 sec 73.6 MBytes 618 Mbits/sec [ 1] 3.0000-4.0000 sec 73.6 MBytes 618 Mbits/sec [ 1] 4.0000-5.0000 sec 72.9 MBytes 611 Mbits/sec [ 1] 5.0000-6.0000 sec 73.4 MBytes 616 Mbits/sec [ 1] 6.0000-7.0000 sec 73.5 MBytes 617 Mbits/sec [ 1] 7.0000-8.0000 sec 73.4 MBytes 616 Mbits/sec [ 1] 8.0000-9.0000 sec 73.4 MBytes 616 Mbits/sec [ 1] 9.0000-10.0000 sec 73.9 MBytes 620 Mbits/sec [ 1] 0.0000-10.0174 sec 723 MBytes 605 Mbits/sec Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: Remove DECnet leftovers from flow.h.Guillaume Nault
DECnet was removed by commit 1202cdd66531 ("Remove DECnet support from kernel"). Let's also revome its flow structure. Compile-tested only (allmodconfig). Signed-off-by: Guillaume Nault <gnault@redhat.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03bnx2x: fix potential memory leak in bnx2x_tpa_stop()Jianglei Nie
bnx2x_tpa_stop() allocates a memory chunk from new_data with bnx2x_frag_alloc(). The new_data should be freed when gets some error. But when "pad + len > fp->rx_buf_size" is true, bnx2x_tpa_stop() returns without releasing the new_data, which will lead to a memory leak. We should free the new_data with bnx2x_frag_free() when "pad + len > fp->rx_buf_size" is true. Fixes: 07b0f00964def8af9321cfd6c4a7e84f6362f728 ("bnx2x: fix possible panic under memory stress") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03eth: lan743x: reject extts for non-pci11x1x devicesRaju Lakkaraju
Remove PTP_PF_EXTTS support for non-PCI11x1x devices since they do not support the PTP-IO Input event triggered timestamping mechanisms added Fixes: 60942c397af6 ("net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)") Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03gro: add support of (hw)gro packets to gro stackCoco Li
Current GRO stack only supports incoming packets containing one frame/MSS. This patch changes GRO to accept packets that are already GRO. HW-GRO (aka RSC for some vendors) is very often limited in presence of interleaved packets. Linux SW GRO stack can complete the job and provide larger GRO packets, thus reducing rate of ACK packets and cpu overhead. This also means BIG TCP can still be used, even if HW-GRO/RSC was able to cook ~64 KB GRO packets. v2: fix logic in tcp_gro_receive() Only support TCP for the moment (Paolo) Co-Developed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Coco Li <lixiaoyan@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: prestera: acl: Add check for kmemdupJiasheng Jiang
As the kemdup could return NULL, it should be better to check the return value and return error if fails. Moreover, the return value of prestera_acl_ruleset_keymask_set() should be checked by cascade. Fixes: 604ba230902d ("net: prestera: flower template support") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Taras Chornyi<tchornyi@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03Merge branch 'mptcp-fastclose'David S. Miller
Mat Martineau says: ==================== mptcp: Fastclose edge cases and error handling MPTCP has existing code to use the MP_FASTCLOSE option header, which works like a RST for the MPTCP-level connection (regular RSTs only affect specific subflows in MPTCP). This series has some improvements for fastclose. Patch 1 aligns fastclose socket error handling with TCP RST behavior on TCP sockets. Patch 2 adds use of MP_FASTCLOSE in some more edge cases, like file descriptor close, FIN_WAIT timeout, and when the socket has unread data. Patch 3 updates the fastclose self tests. Patch 4 does not change any code, just fixes some outdated comments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03mptcp: update misleading comments.Paolo Abeni
The MPTCP data path is quite complex and hard to understend even without some foggy comments referring to modified code and/or completely misleading from the beginning. Update a few of them to more accurately describing the current status. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03selftests: mptcp: update and extend fastclose test-casesPaolo Abeni
After the previous patches, the MPTCP protocol can generate fast-closes on both ends of the connection. Rework the relevant test-case to carefully trigger the fast-close code-path on a single end at the time, while ensuring than a predictable amount of data is spooled on both ends. Additionally add another test-cases for the passive socket fast-close. Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03mptcp: use fastclose on more edge scenariosPaolo Abeni
Daire reported a user-space application hang-up when the peer is forcibly closed before the data transfer completion. The relevant application expects the peer to either do an application-level clean shutdown or a transport-level connection reset. We can accommodate a such user by extending the fastclose usage: at fd close time, if the msk socket has some unread data, and at FIN_WAIT timeout. Note that at MPTCP close time we must ensure that the TCP subflows will reset: set the linger socket option to a suitable value. Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03mptcp: propagate fastclose errorPaolo Abeni
When an mptcp socket is closed due to an incoming FASTCLOSE option, so specific sk_err is set and later syscall will fail usually with EPIPE. Align the current fastclose error handling with TCP reset, properly setting the socket error according to the current msk state and propagating such error. Additionally sendmsg() is currently not handling properly the sk_err, always returning EPIPE. Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03Merge branch 'RollBall-Hilink-Turris-10G-copper-SFP-support'David S. Miller
Marek Behún says: ==================== RollBall / Hilink / Turris 10G copper SFP support I am resurrecting my attempt to add support for RollBall / Hilink / Turris 10G copper SFPs modules. The modules contain Marvell 88X3310 PHY, which can communicate with the system via sgmii, 2500base-x, 5gbase-r, 10gbase-r or usxgmii mode. Some of the patches I've taken from Russell King's net-queue [1] (with some rebasing). The important change from my previous attempts are: - I am including the changes needed to phylink and marvell10g driver, so that the 88X3310 PHY is configured to use PHY modes supported by the host (the PHY defaults to use 10gbase-r only on host's side) - I have changed the patch that informs phylib about the interfaces supported by the host (patch 5 of this series): it now fills in the phydev->host_interfaces member only when connecting a PHY that is inside a SFP module. This may change in the future. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: sfp: add support for multigig RollBall transceiversMarek Behún
This adds support for multigig copper SFP modules from RollBall/Hilink. These modules have a specific way to access clause 45 registers of the internal PHY. We also need to wait at least 22 seconds after deasserting TX disable before accessing the PHY. The code waits for 25 seconds just to be sure. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: phy: mdio-i2c: support I2C MDIO protocol for RollBall SFP modulesMarek Behún
Some multigig SFPs from RollBall and Hilink do not expose functional MDIO access to the internal PHY of the SFP via I2C address 0x56 (although there seems to be read-only clause 22 access on this address). Instead these SFPs PHY can be accessed via I2C via the SFP Enhanced Digital Diagnostic Interface - I2C address 0x51. The SFP_PAGE has to be selected to 3 and the password must be filled with 0xff bytes for this PHY communication to work. This extends the mdio-i2c driver to support this protocol by adding a special parameter to mdio_i2c_alloc function via which this RollBall protocol can be selected. Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: sfp: create/destroy I2C mdiobus before PHY probe/after PHY releaseMarek Behún
Instead of configuring the I2C mdiobus when SFP driver is probed, create/destroy the mdiobus before the PHY is probed for/after it is released. This way we can tell the mdio-i2c code which protocol to use for each SFP transceiver. Move the code that determines MDIO I2C protocol from sfp_sm_probe_for_phy() to sfp_sm_mod_probe(), where most of the SFP ID parsing is done. Don't allocate I2C bus if no PHY is expected. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: sfp: Add and use macros for SFP quirks definitionsMarek Behún
Add macros SFP_QUIRK(), SFP_QUIRK_M() and SFP_QUIRK_F() for defining SFP quirk table entries. Use them to deduplicate the code a little bit. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: phylink: allow attaching phy for SFP modules on 802.3z modeMarek Behún
Some SFPs may contain an internal PHY which may in some cases want to connect with the host interface in 1000base-x/2500base-x mode. Do not fail if such PHY is being attached in one of these PHY interface modes. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Pali Rohár <pali@kernel.org> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: phy: marvell10g: select host interface configurationRussell King
Select the host interface configuration according to the capabilities of the host if the host provided them. This is currently provided only when connecting PHY that is inside a SFP. The PHY supports several configurations of host communication: - always communicate with host in 10gbase-r, even if copper speed is lower (rate matching mode), - the same as above but use xaui/rxaui instead of 10gbase-r, - switch host SerDes mode between 10gbase-r, 5gbase-r, 2500base-x and sgmii according to copper speed, - the same as above but use xaui/rxaui instead of 10gbase-r. This mode of host communication, called MACTYPE, is by default selected by strapping pins, but it can be changed in software. This adds support for selecting this mode according to which modes are supported by the host. This allows the kernel to: - support SFP modules with 88X33X0 or 88E21X0 inside them Note: we use mv3310_select_mactype() for both 88X3310 and 88X3340, although 88X3340 does not support XAUI. This is not a problem because 88X3340 does not declare XAUI in it's supported_interfaces, and so this function will never choose that MACTYPE. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [ rebase, updated, also added support for 88E21X0 ] Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: phy: marvell10g: Use tabs instead of spaces for indentationMarek Behún
Some register definitions were defined with spaces used for indentation. Change them to tabs. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: phylink: pass supported host PHY interface modes to phylib for SFP's PHYsMarek Behún
Pass the supported PHY interface types to phylib if the PHY we are connecting is inside a SFP, so that the PHY driver can select an appropriate host configuration mode for their interface according to the host capabilities. For example the Marvell 88X3310 PHY inside RollBall SFP modules defaults to 10gbase-r mode on host's side, and the marvell10g driver currently does not change this setting. But a host may not support 10gbase-r. For example Turris Omnia only supports sgmii, 1000base-x and 2500base-x modes. The PHY can be configured to use those modes, but in order for the PHY driver to do that, it needs to know which modes are supported. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: phylink: rename phylink_sfp_config()Russell King (Oracle)
phylink_sfp_config() now only deals with configuring the MAC for a SFP containing a PHY. Rename it to be specific. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: phylink: use phy_interface_t bitmaps for optical modulesRussell King
Where a MAC provides a phy_interface_t bitmap, use these bitmaps to select the operating interface mode for optical SFP modules, rather than using the linkmode bitmaps. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: sfp: augment SFP parsing with phy_interface_t bitmapRussell King
We currently parse the SFP EEPROM to a bitmap of ethtool link modes, and then attempt to convert the link modes to a PHY interface mode. While this works at present, there are cases where this is sub-optimal. For example, where a module can operate with several different PHY interface modes. To start addressing this, arrange for the SFP EEPROM parsing to also provide a bitmap of the possible PHY interface modes. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: phylink: add ability to validate a set of interface modesRussell King (Oracle)
Rather than having the ability to validate all supported interface modes or a single interface mode, introduce the ability to validate a subset of supported modes. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [ rebased on current net-next ] Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03platform/x86: use PLATFORM_DEVID_NONE instead of -1Barnabás Pőcze
Use the `PLATFORM_DEVID_NONE` constant instead of hard-coding -1 when creating a platform device. No functional changes are intended. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Link: https://lore.kernel.org/r/20220930104857.2796923-1-pobrn@protonmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-10-03platform/x86/amd: pmc: Dump idle mask during "check" stage insteadMario Limonciello
The idle mask is dumped during the "prepare" and "restore" stage right now, which helps to demonstrate issues only related to the first s2idle entry. If the system has entered s2idle once, but was woken up never breaking the s2idle loop but also never went back to sleep we might still have another issue to deal with however. Move the dynamic debugging message here so that we'll catch it on each iteration. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216516 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20220929215042.745-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-10-03net: sparx5: Fix return type of sparx5_port_xmit_implNathan Huckleberry
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of sparx5_port_xmit_impl should be changed from int to netdev_tx_t. Reported-by: Dan Carpenter <error27@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Signed-off-by: Nathan Huckleberry <nhuck@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03af_unix: Fix memory leaks of the whole sk due to OOB skb.Kuniyuki Iwashima
syzbot reported a sequence of memory leaks, and one of them indicated we failed to free a whole sk: unreferenced object 0xffff8880126e0000 (size 1088): comm "syz-executor419", pid 326, jiffies 4294773607 (age 12.609s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 7d 00 00 00 00 00 00 00 ........}....... 01 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<000000006fefe750>] sk_prot_alloc+0x64/0x2a0 net/core/sock.c:1970 [<0000000074006db5>] sk_alloc+0x3b/0x800 net/core/sock.c:2029 [<00000000728cd434>] unix_create1+0xaf/0x920 net/unix/af_unix.c:928 [<00000000a279a139>] unix_create+0x113/0x1d0 net/unix/af_unix.c:997 [<0000000068259812>] __sock_create+0x2ab/0x550 net/socket.c:1516 [<00000000da1521e1>] sock_create net/socket.c:1566 [inline] [<00000000da1521e1>] __sys_socketpair+0x1a8/0x550 net/socket.c:1698 [<000000007ab259e1>] __do_sys_socketpair net/socket.c:1751 [inline] [<000000007ab259e1>] __se_sys_socketpair net/socket.c:1748 [inline] [<000000007ab259e1>] __x64_sys_socketpair+0x97/0x100 net/socket.c:1748 [<000000007dedddc1>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<000000007dedddc1>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 [<000000009456679f>] entry_SYSCALL_64_after_hwframe+0x63/0xcd We can reproduce this issue by creating two AF_UNIX SOCK_STREAM sockets, send()ing an OOB skb to each other, and close()ing them without consuming the OOB skbs. int skpair[2]; socketpair(AF_UNIX, SOCK_STREAM, 0, skpair); send(skpair[0], "x", 1, MSG_OOB); send(skpair[1], "x", 1, MSG_OOB); close(skpair[0]); close(skpair[1]); Currently, we free an OOB skb in unix_sock_destructor() which is called via __sk_free(), but it's too late because the receiver's unix_sk(sk)->oob_skb is accounted against the sender's sk->sk_wmem_alloc and __sk_free() is called only when sk->sk_wmem_alloc is 0. In the repro sequences, we do not consume the OOB skb, so both two sk's sock_put() never reach __sk_free() due to the positive sk->sk_wmem_alloc. Then, no one can consume the OOB skb nor call __sk_free(), and we finally leak the two whole sk. Thus, we must free the unconsumed OOB skb earlier when close()ing the socket. Fixes: 314001f0bf92 ("af_unix: Add OOB support") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03Merge branch 'ip_tunnel-netlink-parms'David S. Miller
Liu Jian says: ==================== Add helper functions to parse netlink msg of ip_tunnel v1->v2: Move the implementation of the helper function to ip_tunnel_core.c v2->v3: Change EXPORT_SYMBOL to EXPORT_SYMBOL_GPL ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: Add helper function to parse netlink msg of ip_tunnel_parmLiu Jian
Add ip_tunnel_netlink_parms to parse netlink msg of ip_tunnel_parm. Reduces duplicate code, no actual functional changes. Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: Add helper function to parse netlink msg of ip_tunnel_encapLiu Jian
Add ip_tunnel_netlink_encap_parms to parse netlink msg of ip_tunnel_encap. Reduces duplicate code, no actual functional changes. Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: rds: don't hold sock lock when cancelling work from ↵Tetsuo Handa
rds_tcp_reset_callbacks() syzbot is reporting lockdep warning at rds_tcp_reset_callbacks() [1], for commit ac3615e7f3cffe2a ("RDS: TCP: Reduce code duplication in rds_tcp_reset_callbacks()") added cancel_delayed_work_sync() into a section protected by lock_sock() without realizing that rds_send_xmit() might call lock_sock(). We don't need to protect cancel_delayed_work_sync() using lock_sock(), for even if rds_{send,recv}_worker() re-queued this work while __flush_work() from cancel_delayed_work_sync() was waiting for this work to complete, retried rds_{send,recv}_worker() is no-op due to the absence of RDS_CONN_UP bit. Link: https://syzkaller.appspot.com/bug?extid=78c55c7bc6f66e53dce2 [1] Reported-by: syzbot <syzbot+78c55c7bc6f66e53dce2@syzkaller.appspotmail.com> Co-developed-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: syzbot <syzbot+78c55c7bc6f66e53dce2@syzkaller.appspotmail.com> Fixes: ac3615e7f3cffe2a ("RDS: TCP: Reduce code duplication in rds_tcp_reset_callbacks()") Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== 1) Refactor selftests to use an array of structs in xfrm_fill_key(). From Gautam Menghani. 2) Drop an unused argument from xfrm_policy_match. From Hongbin Wang. 3) Support collect metadata mode for xfrm interfaces. From Eyal Birger. 4) Add netlink extack support to xfrm. From Sabrina Dubroca. Please note, there is a merge conflict in: include/net/dst_metadata.h between commit: 0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support") from the net-next tree and commit: 5182a5d48c3d ("net: allow storing xfrm interface metadata in metadata_dst") from the ipsec-next tree. Can be solved as done in linux-next. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03Merge branch 'for-next' into for-linusTakashi Iwai
2022-10-02hwmon: (corsair-psu) add USB id of new revision of the HX1000i psuWilken Gottwalt
Also updates the documentation accordingly. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/YznOUQ7Pijedu0NW@monster.localdomain Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-10-02Linux 6.0v6.0Linus Torvalds
2022-10-02iomap: add a tracepoint for mappings returned by map_blocksDarrick J. Wong
Add a new tracepoint so we can see what mapping the filesystem returns to writeback a dirty page. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2022-10-02iomap: iomap: fix memory corruption when recording errors during writebackDarrick J. Wong
Every now and then I see this crash on arm64: Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8 Buffer I/O error on dev dm-0, logical block 8733687, async page read Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 64k pages, 42-bit VAs, pgdp=0000000139750000 [00000000000000f8] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP Buffer I/O error on dev dm-0, logical block 8733688, async page read Dumping ftrace buffer: Buffer I/O error on dev dm-0, logical block 8733689, async page read (ftrace buffer empty) XFS (dm-0): log I/O error -5 Modules linked in: dm_thin_pool dm_persistent_data XFS (dm-0): Metadata I/O Error (0x1) detected at xfs_trans_read_buf_map+0x1ec/0x590 [xfs] (fs/xfs/xfs_trans_buf.c:296). dm_bio_prison XFS (dm-0): Please unmount the filesystem and rectify the problem(s) XFS (dm-0): xfs_imap_lookup: xfs_ialloc_read_agi() returned error -5, agno 0 dm_bufio dm_log_writes xfs nft_chain_nat xt_REDIRECT nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_REJECT potentially unexpected fatal signal 6. nf_reject_ipv6 potentially unexpected fatal signal 6. ipt_REJECT nf_reject_ipv4 CPU: 1 PID: 122166 Comm: fsstress Tainted: G W 6.0.0-rc5-djwa #rc5 3004c9f1de887ebae86015f2677638ce51ee7 rpcsec_gss_krb5 auth_rpcgss xt_tcpudp ip_set_hash_ip ip_set_hash_net xt_set nft_compat ip_set_hash_mac ip_set nf_tables Hardware name: QEMU KVM Virtual Machine, BIOS 1.5.1 06/16/2021 pstate: 60001000 (nZCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--) ip_tables pc : 000003fd6d7df200 x_tables lr : 000003fd6d7df1ec overlay nfsv4 CPU: 0 PID: 54031 Comm: u4:3 Tainted: G W 6.0.0-rc5-djwa #rc5 3004c9f1de887ebae86015f2677638ce51ee7405 Hardware name: QEMU KVM Virtual Machine, BIOS 1.5.1 06/16/2021 Workqueue: writeback wb_workfn sp : 000003ffd9522fd0 (flush-253:0) pstate: 60401005 (nZCv daif +PAN -UAO -TCO -DIT +SSBS BTYPE=--) pc : errseq_set+0x1c/0x100 x29: 000003ffd9522fd0 x28: 0000000000000023 x27: 000002acefeb6780 x26: 0000000000000005 x25: 0000000000000001 x24: 0000000000000000 x23: 00000000ffffffff x22: 0000000000000005 lr : __filemap_set_wb_err+0x24/0xe0 x21: 0000000000000006 sp : fffffe000f80f760 x29: fffffe000f80f760 x28: 0000000000000003 x27: fffffe000f80f9f8 x26: 0000000002523000 x25: 00000000fffffffb x24: fffffe000f80f868 x23: fffffe000f80fbb0 x22: fffffc0180c26a78 x21: 0000000002530000 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000001 x13: 0000000000470af3 x12: fffffc0058f70000 x11: 0000000000000040 x10: 0000000000001b20 x9 : fffffe000836b288 x8 : fffffc00eb9fd480 x7 : 0000000000f83659 x6 : 0000000000000000 x5 : 0000000000000869 x4 : 0000000000000005 x3 : 00000000000000f8 x20: 000003fd6d740020 x19: 000000000001dd36 x18: 0000000000000001 x17: 000003fd6d78704c x16: 0000000000000001 x15: 000002acfac87668 x2 : 0000000000000ffa x1 : 00000000fffffffb x0 : 00000000000000f8 Call trace: errseq_set+0x1c/0x100 __filemap_set_wb_err+0x24/0xe0 iomap_do_writepage+0x5e4/0xd5c write_cache_pages+0x208/0x674 iomap_writepages+0x34/0x60 xfs_vm_writepages+0x8c/0xcc [xfs 7a861f39c43631f15d3a5884246ba5035d4ca78b] x14: 0000000000000000 x13: 2064656e72757465 x12: 0000000000002180 x11: 000003fd6d8a82d0 x10: 0000000000000000 x9 : 000003fd6d8ae288 x8 : 0000000000000083 x7 : 00000000ffffffff x6 : 00000000ffffffee x5 : 00000000fbad2887 x4 : 000003fd6d9abb58 x3 : 000003fd6d740020 x2 : 0000000000000006 x1 : 000000000001dd36 x0 : 0000000000000000 CPU: 1 PID: 122167 Comm: fsstress Tainted: G W 6.0.0-rc5-djwa #rc5 3004c9f1de887ebae86015f2677638ce51ee7 do_writepages+0x90/0x1c4 __writeback_single_inode+0x4c/0x4ac Hardware name: QEMU KVM Virtual Machine, BIOS 1.5.1 06/16/2021 writeback_sb_inodes+0x214/0x4ac wb_writeback+0xf4/0x3b0 pstate: 60001000 (nZCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--) wb_workfn+0xfc/0x580 process_one_work+0x1e8/0x480 pc : 000003fd6d7df200 worker_thread+0x78/0x430 This crash is a result of iomap_writepage_map encountering some sort of error during writeback and wanting to set that error code in the file mapping so that fsync will report it. Unfortunately, the code dereferences folio->mapping after unlocking the folio, which means that another thread could have removed the page from the page cache (writeback doesn't hold the invalidation lock) and give it to somebody else. At best we crash the system like above; at worst, we corrupt memory or set an error on some other unsuspecting file while failing to record the problems with *this* file. Regardless, fix the problem by reporting the error to the inode mapping. NOTE: Commit 598ecfbaa742 lifted the XFS writeback code to iomap, so this fix should be backported to XFS in the 4.6-5.4 kernels in addition to iomap in the 5.5-5.19 kernels. Fixes: e735c0079465 ("iomap: Convert iomap_add_to_ioend() to take a folio") # 5.17 onward Fixes: 598ecfbaa742 ("iomap: lift the xfs writeback code to iomap") # 5.5-5.16, needs backporting Fixes: 150d5be09ce4 ("xfs: remove xfs_cancel_ioend") # 4.6-5.4, needs backporting Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-10-02Merge tag 'i2c-for-6.0-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Add missing DT bindings for STM32 and a resource leak fix for DaVinci" * tag 'i2c-for-6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: davinci: fix PM disable depth imbalance in davinci_i2c_probe dt-bindings: i2c: st,stm32-i2c: Document wakeup-source property dt-bindings: i2c: st,stm32-i2c: Document interrupt-names property
2022-10-02Merge tag 'perf-urgent-2022-10-02' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc perf fixes from Ingo Molnar: - Fix a PMU enumeration/initialization bug on Intel Alder Lake CPUs - Fix KVM guest PEBS register handling - Fix race/reentry bug in perf_output_read_group() reading of PMU counters * tag 'perf-urgent-2022-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix reentry problem in perf_output_read_group() perf/x86/core: Completely disable guest PEBS via guest's global_ctrl perf/x86/intel: Fix unchecked MSR access error for Alder Lake N
2022-10-02Merge tag 'x86_urgent_for_v6.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Add the respective UP last level cache mask accessors in order not to cause segfaults when lscpu accesses their representation in sysfs - Fix for a race in the alternatives batch patching machinery when kprobes are set * tag 'x86_urgent_for_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cacheinfo: Add a cpu_llc_shared_mask() UP variant x86/alternative: Fix race in try_get_desc()
generated by cgit (git 2.34.1) at 2025-09-11 12:49:52 +0000