summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-14drm/virtio: Handle error from virtio_gpu_resource_id_getMatthew Wilcox
ida_alloc() can return -ENOMEM in the highly unlikely case we run out of memory. The current code creates an object with an invalid ID. Signed-off-by: Matthew Wilcox <willy@infradead.org> Link: http://patchwork.freedesktop.org/patch/msgid/20181030165352.13065-1-willy@infradead.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-14drm/i915: Remove special case for power well 1/MISC_IO state verificationImre Deak
Even though PW#1 and the MISC_IO power wells are managed by the DMC firmware (toggled dynamically if conditions allow it) from the driver's POV they are always on if the display core is initialized (always restored by DMC to the enabled state after exiting from DC5/6 for instance b/c of MMIO access). Accordingly we can just mark them as always-on and remove the special casing for them during state verification (thus enabling verification for these power wells too). Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181109145822.15446-3-imre.deak@intel.com
2018-11-14drm/i915: Use proper bool bitfield initializer in power well descsImre Deak
We can just use a proper true/false initializer even for bitfields, which is more descriptive. Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181109145822.15446-2-imre.deak@intel.com
2018-11-14drm/i915/gen9_bc: Work around DMC bug zeroing power well requestsImre Deak
A DMC bug on GEN9 big core machines fails to restore the driver's request bits for the PW1 and MISC_IO power wells after a DC5/6 entry->exit sequence. As a consequence the driver's subsequent check for the enabled status of these power wells will fail, as the check considers the power wells being enabled only if both the status and request bits are set. To work around this borrow the request bits from BIOS's own request register in which DMC forces on the request bits when exiting from DC5/6. This fixes a problem reported by Ramalingam, where HDCP init failed, since PW1 reported itself as being disabled, while in reality it was enabled. Reported-by: Ramalingam C <ramalingam.c@intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181109145822.15446-1-imre.deak@intel.com
2018-11-14drm/i915/icl: Drop spurious register read from icl_dbuf_slices_updateMika Kuoppala
Register DBUF_CTL_S2 is read and it's value is not used. As there is no explanation why we should prime the hardware with read, remove it as spurious. Fixes: aa9664ffe863 ("drm/i915/icl: Enable 2nd DBuf slice only when needed") Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181109140924.2663-1-mika.kuoppala@linux.intel.com (cherry picked from commit 8577c319b6511fbc391f3775225fecd8b979bc26) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-14drm/i915: fix broadwell EU computationLionel Landwerlin
subslice_mask is an array indexed by slice, not subslice. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 8cc7669355136f ("drm/i915: store all subslice masks") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108712 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181112123931.2815-1-lionel.g.landwerlin@intel.com (cherry picked from commit 63ac3328f0d1d37f286e397b14d9596ed09d7ca5) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-14usb: dwc3: gadget: fix ISOC TRB type on unaligned transfersFelipe Balbi
When chaining ISOC TRBs together, only the first ISOC TRB should be of type ISOC_FIRST, all others should be of type ISOC. This patch fixes that. Fixes: c6267a51639b ("usb: dwc3: gadget: align transfers to wMaxPacketSize") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-14drm/i915: Fix icl workarounds whitespacesMika Kuoppala
Align icl workarounds whitespace with the rest of the file Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181109145333.10570-2-mika.kuoppala@linux.intel.com
2018-11-14drm/i915: Deduplicate register definition for GAMW_ECO_DEV_RW_IAMika Kuoppala
This got duplicated on introducing icl workarounds. Fix by using the older definition and moving the wa bit definition there. No functional changes. v3: avoid fixes tag, whitespace (Chris) References: 908ae0517363 ("drm/i915/icl: WaDisCtxReload") Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181109145333.10570-1-mika.kuoppala@linux.intel.com
2018-11-14drm/i915/icl: Drop spurious register read from icl_dbuf_slices_updateMika Kuoppala
Register DBUF_CTL_S2 is read and it's value is not used. As there is no explanation why we should prime the hardware with read, remove it as spurious. Fixes: aa9664ffe863 ("drm/i915/icl: Enable 2nd DBuf slice only when needed") Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181109140924.2663-1-mika.kuoppala@linux.intel.com
2018-11-14Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO ↵Shen Jing
transfers" This reverts commit b4194da3f9087dd38d91b40f9bec42d59ce589a8 since it causes list corruption followed by kernel panic: Workqueue: adb ffs_aio_cancel_worker RIP: 0010:__list_add_valid+0x4d/0x70 Call Trace: insert_work+0x47/0xb0 __queue_work+0xf6/0x400 queue_work_on+0x65/0x70 dwc3_gadget_giveback+0x44/0x50 [dwc3] dwc3_gadget_ep_dequeue+0x83/0x2d0 [dwc3] ? finish_wait+0x80/0x80 usb_ep_dequeue+0x1e/0x90 process_one_work+0x18c/0x3b0 worker_thread+0x3c/0x390 ? process_one_work+0x3b0/0x3b0 kthread+0x11e/0x140 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x3a/0x50 This issue is seen with warm reboot stability testing. Signed-off-by: Shen Jing <jingx.shen@intel.com> Signed-off-by: Saranya Gopal <saranya.gopal@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-14usb: dwc2: pci: Fix an error code in probeDan Carpenter
We added some error handling to this function but forgot to set the error code on this path. Fixes: ecd29dabb2ba ("usb: dwc2: pci: Handle error cleanup in probe") Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-14usb: dwc3: Fix NULL pointer exception in dwc3_pci_remove()Kuppuswamy Sathyanarayanan
In dwc3_pci_quirks() function, gpiod lookup table is only registered for baytrail SOC. But in dwc3_pci_remove(), we try to unregistered it without any checks. This leads to NULL pointer de-reference exception in gpiod_remove_lookup_table() when unloading the module for non baytrail SOCs. This patch fixes this issue. Fixes: 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources") Cc: <stable@vger.kernel.org> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-14xtensa: fix boot parameters address translationMax Filippov
The bootloader may pass physical address of the boot parameters structure to the MMUv3 kernel in the register a2. Code in the _SetupMMU block in the arch/xtensa/kernel/head.S is supposed to map that physical address to the virtual address in the configured virtual memory layout. This code haven't been updated when additional 256+256 and 512+512 memory layouts were introduced and it may produce wrong addresses when used with these layouts. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-11-14powerpc/numa: Suppress "VPHN is not supported" messagesSatheesh Rajendran
When VPHN function is not supported and during cpu hotplug event, kernel prints message 'VPHN function not supported. Disabling polling...'. Currently it prints on every hotplug event, it floods dmesg when a KVM guest tries to hotplug huge number of vcpus, let's just print once and suppress further kernel prints. Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-13selinux: fix non-MLS handling in mls_context_to_sid()Paul Moore
Commit 95ffe194204a ("selinux: refactor mls_context_to_sid() and make it stricter") inadvertently changed how we handle labels that did not contain MLS information. This patch restores the proper behavior in mls_context_to_sid() and adds a comment explaining the proper behavior to help ensure this doesn't happen again. Fixes: 95ffe194204a ("selinux: refactor mls_context_to_sid() and make it stricter") Reported-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-11-13drm/i915: add ICP support to cnp_rawclk() and kill icp_rawclk()Paulo Zanoni
I think I'm probably the one who argued in favor of having separate implementations for both PCHs, but the calculations are actually the same, the clocks are the same and the only difference is that on ICP we write the numerator to the register. I have previously suggested to kill cnp_rawclk() and keep the icp_rawclk() style, but Ville gave some good arguments that what's in this patch may be the better choice. v2: Switch numerator to 1 from 1000 and adjust calculations accordingly (Ville). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181112232313.26373-3-paulo.r.zanoni@intel.com
2018-11-13drm/i915: rename CNP_RAWCLK_FRAC to CNP_RAWCLK_DENPaulo Zanoni
Although CNP names this field "Counter Fraction", what we write to the register is really the denominator for the fractional part of the divider, not the fractional part (and the field description even says that). The ICP spec renamed the field to "Counter Fraction Denominator", which makes a lot more sense. Use the more complete ICL naming because we will merge the CNP and ICP functions into a single one, which will introduce the concept of the numerator. That will make a lot more sense when you read the "num/frac = den" calculation. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181112232313.26373-2-paulo.r.zanoni@intel.com
2018-11-13drm/i915/cnp+: update to the new RAWCLK_FREQ recommendationsPaulo Zanoni
BSpec was updated and now there's no more "subtract 1" to the Microsecond Counter Divider field. It seems this should help fixing some GMBUS issues. I'm not aware of any specific open bug that could be solved by this patch. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181112232313.26373-1-paulo.r.zanoni@intel.com
2018-11-13NFSv4: Fix an Oops during delegation callbacksTrond Myklebust
If the server sends a CB_GETATTR or a CB_RECALL while the filesystem is being unmounted, then we can Oops when releasing the inode in nfs4_callback_getattr() and nfs4_callback_recall(). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-11-13integrity: support new struct public_key_signature encoding fieldMimi Zohar
On systems with IMA-appraisal enabled with a policy requiring file signatures, the "good" signature values are stored on the filesystem as extended attributes (security.ima). Signature verification failure would normally be limited to just a particular file (eg. executable), but during boot signature verification failure could result in a system hang. Defining and requiring a new public_key_signature field requires all callers of asymmetric signature verification to be updated to reflect the change. This patch updates the integrity asymmetric_verify() caller. Fixes: 82f94f24475c ("KEYS: Provide software public key query function [ver #2]") Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Cc: David Howells <dhowells@redhat.com> Acked-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2018-11-13kdb: kdb_support: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the code comments with a proper "fall through" annotation, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2018-11-13kdb: kdb_keyboard: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the code comments with a proper "fall through" annotation, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2018-11-13kdb: kdb_main: refactor code in kdb_md_lineGustavo A. R. Silva
Replace the whole switch statement with a for loop. This makes the code clearer and easy to read. This also addresses the following Coverity warnings: Addresses-Coverity-ID: 115090 ("Missing break in switch") Addresses-Coverity-ID: 115091 ("Missing break in switch") Addresses-Coverity-ID: 114700 ("Missing break in switch") Suggested-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> [daniel.thompson@linaro.org: Tiny grammar change in description] Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2018-11-13kdb: Use strscpy with destination buffer sizePrarit Bhargava
gcc 8.1.0 warns with: kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’: kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=] strncpy(prefix_name, name, strlen(name)+1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/debug/kdb/kdb_support.c:239:31: note: length computed here Use strscpy() with the destination buffer size, and use ellipses when displaying truncated symbols. v2: Use strscpy() Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Jonathan Toppins <jtoppins@redhat.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: kgdb-bugreport@lists.sourceforge.net Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2018-11-13kdb: print real address of pointers instead of hashed addressesChristophe Leroy
Since commit ad67b74d2469 ("printk: hash addresses printed with %p"), all pointers printed with %p are printed with hashed addresses instead of real addresses in order to avoid leaking addresses in dmesg and syslog. But this applies to kdb too, with is unfortunate: Entering kdb (current=0x(ptrval), pid 329) due to Keyboard Entry kdb> ps 15 sleeping system daemon (state M) processes suppressed, use 'ps A' to see all. Task Addr Pid Parent [*] cpu State Thread Command 0x(ptrval) 329 328 1 0 R 0x(ptrval) *sh 0x(ptrval) 1 0 0 0 S 0x(ptrval) init 0x(ptrval) 3 2 0 0 D 0x(ptrval) rcu_gp 0x(ptrval) 4 2 0 0 D 0x(ptrval) rcu_par_gp 0x(ptrval) 5 2 0 0 D 0x(ptrval) kworker/0:0 0x(ptrval) 6 2 0 0 D 0x(ptrval) kworker/0:0H 0x(ptrval) 7 2 0 0 D 0x(ptrval) kworker/u2:0 0x(ptrval) 8 2 0 0 D 0x(ptrval) mm_percpu_wq 0x(ptrval) 10 2 0 0 D 0x(ptrval) rcu_preempt The whole purpose of kdb is to debug, and for debugging real addresses need to be known. In addition, data displayed by kdb doesn't go into dmesg. This patch replaces all %p by %px in kdb in order to display real addresses. Fixes: ad67b74d2469 ("printk: hash addresses printed with %p") Cc: <stable@vger.kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2018-11-13kdb: use correct pointer when 'btc' calls 'btt'Christophe Leroy
On a powerpc 8xx, 'btc' fails as follows: Entering kdb (current=0x(ptrval), pid 282) due to Keyboard Entry kdb> btc btc: cpu status: Currently on cpu 0 Available cpus: 0 kdb_getarea: Bad address 0x0 when booting the kernel with 'debug_boot_weak_hash', it fails as well Entering kdb (current=0xba99ad80, pid 284) due to Keyboard Entry kdb> btc btc: cpu status: Currently on cpu 0 Available cpus: 0 kdb_getarea: Bad address 0xba99ad80 On other platforms, Oopses have been observed too, see https://github.com/linuxppc/linux/issues/139 This is due to btc calling 'btt' with %p pointer as an argument. This patch replaces %p by %px to get the real pointer value as expected by 'btt' Fixes: ad67b74d2469 ("printk: hash addresses printed with %p") Cc: <stable@vger.kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2018-11-13mtd: spi_nor: pass DMA-able buffer to spi_nor_read_raw()Tudor.Ambarus@microchip.com
spi_nor_read_raw() calls nor->read() which might be implemented by the m25p80 driver. m25p80 uses the spi-mem layer which requires DMA-able in/out buffers. Pass kmalloc'ed dma buffer to spi_nor_read_raw(). Fixes: b038e8e3be72 ("mtd: spi-nor: parse SFDP Sector Map Parameter Table") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-11-13mtd: spi-nor: don't overwrite errno in spi_nor_get_map_in_use()Tudor.Ambarus@microchip.com
Don't overwrite the errno from spi_nor_read_raw(). Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-11-13mtd: spi-nor: fix iteration over smpt arrayTudor.Ambarus@microchip.com
Iterate over smpt array using its starting address and length instead of the blind iterations that used data found in the array. This prevents possible memory accesses outside of the smpt array boundaries in case software, or manufacturers, misrepresent smpt array fields. Fixes: b038e8e3be72 ("mtd: spi-nor: parse SFDP Sector Map Parameter Table") Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-11-13mtd: spi-nor: don't drop sfdp data if optional parsers failTudor.Ambarus@microchip.com
JESD216C states that just the Basic Flash Parameter Table is mandatory. Already defined (or future) additional parameter headers and tables are optional. Don't drop already collected sfdp data in case an optional table parser fails. In case of failing, each optional parser is responsible to roll back to the previously known spi_nor data. Fixes: b038e8e3be72 ("mtd: spi-nor: parse SFDP Sector Map Parameter Table") Reported-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-11-13Merge branch 'qed-Miscellaneous-bug-fixes'David S. Miller
Denis Bolotin says: ==================== qed: Miscellaneous bug fixes This patch series fixes several unrelated bugs across the driver. Please consider applying to net. V1->V2: ------- Use dma_rmb() instead of rmb(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13qed: Fix reading wrong value in loop conditionDenis Bolotin
The value of "sb_index" is written by the hardware. Reading its value and writing it to "index" must finish before checking the loop condition. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13qed: Fix rdma_info structure allocationMichal Kalderon
Certain flows need to access the rdma-info structure, for example dcbx update flows. In some cases there can be a race between the allocation or deallocation of the structure which was done in roce start / roce stop and an asynchrounous dcbx event that tries to access the structure. For this reason, we move the allocation of the rdma_info structure to be similar to the iscsi/fcoe info structures which are allocated during device setup. We add a new field of "active" to the struct to define whether roce has already been started or not, and this is checked instead of whether the pointer to the info structure. Fixes: 51ff17251c9c ("qed: Add support for RoCE hw init") Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13qed: Fix overriding offload_tc by protocols without APP TLVDenis Bolotin
The TC received from APP TLV is stored in offload_tc, and should not be set by protocols which did not receive an APP TLV. Fixed the condition when overriding the offload_tc. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13qed: Fix PTT leak in qed_drain()Denis Bolotin
Release PTT before entering error flow. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13Merge tag 'linux-can-fixes-for-4.20-20181109' of ↵David S. Miller
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2018-11-09 this is a pull request of 20 patches for net/master. First we have a patch by Oliver Hartkopp which changes the raw socket's raw_sendmsg() to return an error value if the user tries to send a CANFD frame to a CAN-2.0 device. The next two patches are by Jimmy Assarsson and fix potential problems in the kvaser_usb driver. YueHaibing's patches for the ucan driver fix a compile time warning and remove a duplicate include. Eugeniu Rosca patch adds more binding documentation to the rcar_can driver bindings. The next two patches are by Fabrizio Castro for the rcar_can driver and fixes a problem in the driver's probe function and document the r8a774a1 binding. Lukas Wunner's patch fixes a recpetion problem in hi311x driver by switching from edge to level triggered interruts. The next three patches all target the flexcan driver. Pankaj Bansal's patch unconditionally unlocks the last mailbox used for RX. Alexander Stein provides a better workaround for a hardware limitation when sending RTR frames, by using the last mailbox for TX, resulting in fewer lost frames. The patch by me simplyfies the driver, by making a runtime value a compile time constant. The following 4 patches are by me and provide the groundwork for the next patches by Oleksij Rempel. To avoid code duplication common code in the common CAN driver infrastructure is factured out and error handling is cleaned up. The next 4 patches are by Oleksij Rempel and fix the problem in the flexcan driver that other processes see TX frames arrive out of order with ragards to a RX'ed frame (which are send by a different system on the CAN bus as the result of our TX frame). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13selinux: check length properly in SCTP bind hookOndrej Mosnacek
selinux_sctp_bind_connect() must verify if the address buffer has sufficient length before accessing the 'sa_family' field. See __sctp_connect() for a similar check. The length of the whole address ('len') is already checked in the callees. Reported-by: Qian Cai <cai@gmx.us> Fixes: d452930fd3b9 ("selinux: Add SCTP support") Cc: <stable@vger.kernel.org> # 4.17+ Cc: Richard Haines <richard_c_haines@btinternet.com> Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Tested-by: Qian Cai <cai@gmx.us> Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-11-13drm/amdgpu: fix huge page handling on Vega10Christian König
We accidentially set the huge flag on the parent instead of the childs. This caused some VM faults under memory pressure. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-11-13drm/amd/pp: Fix truncated clock value when set watermarkRex Zhu
the clk value should be tranferred to MHz first and then transfer to uint16. otherwise, the clock value will be truncated. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-11-13drm/i915: Determine DSI panel orientation from VBTVille Syrjälä
VBT appears to have two (or possibly three) ways to indicate the panel rotation. The first is in the MIPI config block, but that apparenly usually (maybe always?) indicates 0 degrees despite the actual panel orientation. The second way to indicate this is in the general features block, which can just indicate whether 180 degress rotation is used. The third might be a separate rotation data block, but that is not at all documented so who knows what it may contain. Let's try the first two. We first try the DSI specicic VBT information, and it it doesn't look trustworthy (ie. indicates 0 degrees) we fall back to the 180 degree thing. Just to avoid too many changes in one go we shall also keep the hardware readout path for now. If this works for more than just my VLV FFRD the question becomes how many of the panel orientation quirks are now redundant? v2: Move the code into intel_dsi.c (Jani) Cc: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181022142015.4026-1-ville.syrjala@linux.intel.com Tested-by: Hans de Goede <hdegoede@redhat.com>
2018-11-13drm/i915: Fix the VLV/CHV DSI panel orientation hw readoutVille Syrjälä
Let's make sure the DSI port is actually on before we go poking at the plane register to determine which way it's rotated. Otherwise we could be looking at a plane that is feeding a HDMI port for instance. And in order to read the plane register we need the power well to be on. Make sure that is indeed the case. We'll also make sure the plane is actually enabled before we trust the rotation bit to tell us the truth. v2: s/intel_dsi/vlv_dsi/ Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181022141953.3889-1-ville.syrjala@linux.intel.com Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
2018-11-13drm/i915: Move skip_intermediate_wm handling into ilk_compute_intermediate_wm()Ville Syrjälä
No point in cluttering the common codepaths with the skip_intermediate_wm handling. Just move it into ilk_compute_intermediate_wm() as those are the only platforms using this. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108151013.24064-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
2018-11-13drm/i915: Account for scale factor when calculating initial phaseVille Syrjälä
To get the initial phase correct we need to account for the scale factor as well. I forgot this initially and was mostly looking at heavily upscaled content where the minor difference between -0.5 and the proper initial phase was not readily apparent. And let's toss in a comment that tries to explain the formula a little bit. v2: The initial phase upper limit is 1.5, not 24.0! Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 0a59952b24e2 ("drm/i915: Configure SKL+ scaler initial phase correctly") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181029181820.21956-1-ville.syrjala@linux.intel.com Tested-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
2018-11-13drm/i915: Always write both TILEOFF and LINOFF plane registersVille Syrjälä
Reduce the clutter in the sprite update functions by writing both TILEOFF and LINOFF registers unconditionally. We already did this for primary planes so might as well do it for the sprites too. There is no harm in writing both registers. Which one gets used depends on the tilimg mode selected in the plane control registers. It might even make sense to clear the register that won't get used. That could make register dumps a little easier to parse. But I'm not sure it's worth the extra hassle. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108150955.23948-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
2018-11-13drm/amdgpu: fix bug with IH ring setupPhilip Yang
The bug limits the IH ring wptr address to 40bit. When the system memory is bigger than 1TB, the bus address is more than 40bit, this causes the interrupt cannot be handled and cleared correctly. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-13Revert "ACPI/PCI: Pay attention to device-specific _PXM node values"Bjorn Helgaas
This reverts commit bad7dcd94f3956bcfc0a69ef71fdf0fcca3de4a8. bad7dcd94f39 ("ACPI/PCI: Pay attention to device-specific _PXM node values") caused boot failures (no console output at all) for Martin [1] and Ingo [2] on AMD ThreadRipper systems. Revert the commit until we figure out how to safely use these device-specific _PXM values. [1] https://lore.kernel.org/linux-pci/20180912152140.3676-2-Jonathan.Cameron@huawei.com [2] https://lore.kernel.org/linux-pci/20181113071712.GA2353@gmail.com Fixes: bad7dcd94f39 ("ACPI/PCI: Pay attention to device-specific _PXM node values") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-11-13drm/i915: Switch LSPCON to PCON mode if it's in LS modeVille Syrjälä
We no longer change LSPCON into PCON mode if it boots up in LS mode. This was broken by some code shuffling in commit 96e35598cead ("drm/i915: Check LSPCON vendor OUI"). I actually can't see a reason why that code shuffling had to be done. The commit msg notes it but doesn't justify it in any way. But I guess we'll keep the code in its current place anyway and just make the "switch to PCON mode" part effective once again. Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Tested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Fixes: 96e35598cead ("drm/i915: Check LSPCON vendor OUI") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107171821.27862-1-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
2018-11-13drm/meson: Add primary plane scalingNeil Armstrong
This patch adds support for the Primary Plane scaling. On the Amlogic GX SoCs, the primary plane is used as On-Screen-Display layer on top of video, and it's needed to keep the OSD layer to a lower size as the physical display size to : - lower the memory bandwidth - lower the OSD rendering - lower the memory usage This use-case is used when setting the display mode to 3840x2160 and the OSD layer is rendered using the GPU. In this case, the GXBB & GXL cannot work on more than 2000x2000 buffer, thus needing the OSD layer to be kept at 1920x1080 and upscaled to 3840x2160 in hardware. The primary plane atomic check still allow 1:1 scaling, allowing native 3840x2160 if needed by user-space applications. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [narmstrong: fixed apply from malformed patch] Link: https://patchwork.freedesktop.org/patch/msgid/1541497202-20570-4-git-send-email-narmstrong@baylibre.com
2018-11-13drm/meson: move OSD scaler management into plane atomic updateNeil Armstrong
In preparation to support the Primary Plane scaling, move the basic OSD Interlace-Only scaler setup code into the primary plane atomic update callback and handle the vsync scaler update like the overlay plane scaling registers update. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1541497202-20570-3-git-send-email-narmstrong@baylibre.com
generated by cgit (git 2.34.1) at 2025-09-12 14:16:40 +0000