summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-11-10Merge branch 'x86/mm' into x86/asm, to merge branchesIngo Molnar
Most of x86/mm is already in x86/asm, so merge the rest too. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-10x86/debug: Handle warnings before the notifier chain, to fix KGDB crashAlexander Shishkin
Commit: 9a93848fe787 ("x86/debug: Implement __WARN() using UD0") turned warnings into UD0, but the fixup code only runs after the notify_die() chain. This is a problem, in particular, with kgdb, which kicks in as if it was a BUG(). Fix this by running the fixup code before the notifier chain in the invalid op handler path. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Ilya Dryomov <idryomov@gmail.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard.weinberger@gmail.com> Cc: <stable@vger.kernel.org> # v4.12+ Link: http://lkml.kernel.org/r/20170724100428.19173-1-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-10net/mlx5e: Increase Striding RQ minimum size limit to 4 multi-packet WQEsEugenia Emantayev
This is to prevent the case of working with a single MPWQE (1 WQE is always reserved as RQ is linked-list). When the WQE is fully consumed, HW should still have available buffer in order not to drop packets. Fixes: 461017cb006a ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-10net/mlx5e: Set page to null in case dma mapping failsInbar Karmy
Currently, when dma mapping fails, put_page is called, but the page is not set to null. Later, in the page_reuse treatment in mlx5e_free_rx_descs(), mlx5e_page_release() is called for the second time, improperly doing dma_unmap (for a non-mapped address) and an extra put_page. Prevent this by nullifying the page pointer when dma_map fails. Fixes: accd58833237 ("net/mlx5e: Introduce RX Page-Reuse") Signed-off-by: Inbar Karmy <inbark@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-10net/mlx5e: Fix napi poll with zero budgetSaeed Mahameed
napi->poll can be called with budget 0, e.g. in netpoll scenarios where the caller only wants to poll TX rings (poll_one_napi@net/core/netpoll.c). The below commit changed RX polling from "while" loop to "do {} while", which caused to ignore the initial budget and handle at least one RX packet. This fixes the following warning: [ 2852.049194] mlx5e_napi_poll+0x0/0x260 [mlx5_core] exceeded budget in poll [ 2852.049195] ------------[ cut here ]------------ [ 2852.049195] WARNING: CPU: 0 PID: 25691 at net/core/netpoll.c:171 netpoll_poll_dev+0x18a/0x1a0 Fixes: 4b7dfc992514 ("net/mlx5e: Early-return on empty completion queues") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Reported-by: Martin KaFai Lau <kafai@fb.com> Tested-by: Martin KaFai Lau <kafai@fb.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-10net/mlx5: Cancel health poll before sending panic teardown commandHuy Nguyen
After the panic teardown firmware command, health_care detects the error in PCI bus and calls the mlx5_pci_err_detected. This health_care flow is no longer needed because the panic teardown firmware command will bring down the PCI bus communication with the HCA. The solution is to cancel the health care timer and its pending workqueue request before sending panic teardown firmware command. Kernel trace: mlx5_core 0033:01:00.0: Shutdown was called mlx5_core 0033:01:00.0: health_care:154:(pid 9304): handling bad device here mlx5_core 0033:01:00.0: mlx5_handle_bad_state:114:(pid 9304): NIC state 1 mlx5_core 0033:01:00.0: mlx5_pci_err_detected was called mlx5_core 0033:01:00.0: mlx5_enter_error_state:96:(pid 9304): start mlx5_3:mlx5_ib_event:3061:(pid 9304): warning: event on port 0 mlx5_core 0033:01:00.0: mlx5_enter_error_state:104:(pid 9304): end Unable to handle kernel paging request for data at address 0x0000003f Faulting instruction address: 0xc0080000434b8c80 Fixes: 8812c24d28f4 ('net/mlx5: Add fast unload support in shutdown flow') Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-10net/mlx5: Loop over temp list to release delay eventsHuy Nguyen
list_splice_init initializing waiting_events_list after splicing it to temp list, therefore we should loop over temp list to fire the events. Fixes: 4ca637a20a52 ("net/mlx5: Delay events till mlx5 interface's add complete for pci resume") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-10Merge branch 'act_vlan-rcu'David S. Miller
Manish Kurup says: ==================== net_sched actions: act_vlan now uses RCU This commit consists of 3 patches: patch1 (1/3): The VLAN action maintains one set of stats across all cores, and uses a spinlock to synchronize updates to it from the same. Changed this to use a per-CPU stats context instead. This change will result in better performance. patch2 (2/3): Modified netronome nfp flower action to use VLAN helper functions instead of accessing/referencing TC act_vlan private structures directly. patch3 (3/3): Using a spinlock in the VLAN action causes performance issues when the VLAN action is used on multiple cores. Rewrote the VLAN action to use RCU read locking for reads and updates instead. All functions now use an RCU dereferenced pointer to access the VLAN action context. Modified helper functions used by other modules, to use the RCU as opposed to directly accessing the structure. As part of this review, there were some changes suggested by reviewers. I have incorporated all the changes that were requested. Here're the changes: v2: Fixed all helper functions to use RCU (rtnl_dereference) - Eric, Jamal v2: Fixed indentation, extra line nits - Jamal, Jiri v2: Moved rcu_head to the end of the struct - Jiri v2: Re-formatted locals to reverse-christmas-tree - Jiri v2: Removed mismatched spin_lock() - Cong v2: Removed spin_lock_bh() in tcf_vlan_init, rtnl_dereference() should suffice - Cong, Jiri v4: Modified the nfp flower action code to use the VLAN helper functions instead of referencing the structure directly. Isolated this into a separate patch - Pieter Jansen v5: Got rid of the unlikely() for the allocation case - Simon Horman v6: Had forgotten cleanup functions for RCU alloc, added them - Dave Miller v7: Re-formatted more locals to reverse-christmas-tree - Pieter V v8: Reverted reverse-christmas-tree(v7), not required when dependencies make it difficult to implement - Alexander D v9: Cover letter subject change - Jamal ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10act_vlan: VLAN action rewrite to use RCU lock/unlock and updateManish Kurup
Using a spinlock in the VLAN action causes performance issues when the VLAN action is used on multiple cores. Rewrote the VLAN action to use RCU read locking for reads and updates instead. All functions now use an RCU dereferenced pointer to access the VLAN action context. Modified helper functions used by other modules, to use the RCU as opposed to directly accessing the structure. Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Manish Kurup <manish.kurup@verizon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10nfp flower action: Modified to use VLAN helper functionsManish Kurup
Modified netronome nfp flower action to use VLAN helper functions instead of accessing/referencing TC act_vlan private structures directly. Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Manish Kurup <manish.kurup@verizon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10act_vlan: Change stats update to use per-core statsManish Kurup
The VLAN action maintains one set of stats across all cores, and uses a spinlock to synchronize updates to it from the same. Changed this to use a per-CPU stats context instead. This change will result in better performance. Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Manish Kurup <manish.kurup@verizon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10sfc: don't warn on successful change of MACRobert Stonehouse
Fixes: 535a61777f44e ("sfc: suppress handled MCDI failures when changing the MAC address") Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: vxge: remove redundant assignments and pointersColin Ian King
There are several pointers that are being assigned but never read so remove these as they are redundant. Also remove an assignment to function_mode that is never read. Cleans up several clang warnings: vxge-main.c:1139:2: warning: Value stored to 'hldev' is never read vxge-main.c:1294:2: warning: Value stored to 'hldev' is never read vxge-main.c:2188:2: warning: Value stored to 'dev' is never read vxge-main.c:2188:2: warning: Value stored to 'dev' is never read vxge-main.c:2723:2: warning: Value stored to 'function_mode' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10rds: ib: Fix NULL pointer dereference in debug codeHåkon Bugge
rds_ib_recv_refill() is a function that refills an IB receive queue. It can be called from both the CQE handler (tasklet) and a worker thread. Just after the call to ib_post_recv(), a debug message is printed with rdsdebug(): ret = ib_post_recv(ic->i_cm_id->qp, &recv->r_wr, &failed_wr); rdsdebug("recv %p ibinc %p page %p addr %lu ret %d\n", recv, recv->r_ibinc, sg_page(&recv->r_frag->f_sg), (long) ib_sg_dma_address( ic->i_cm_id->device, &recv->r_frag->f_sg), ret); Now consider an invocation of rds_ib_recv_refill() from the worker thread, which is preemptible. Further, assume that the worker thread is preempted between the ib_post_recv() and rdsdebug() statements. Then, if the preemption is due to a receive CQE event, the rds_ib_recv_cqe_handler() will be invoked. This function processes receive completions, including freeing up data structures, such as the recv->r_frag. In this scenario, rds_ib_recv_cqe_handler() will process the receive WR posted above. That implies, that the recv->r_frag has been freed before the above rdsdebug() statement has been executed. When it is later executed, we will have a NULL pointer dereference: [ 4088.068008] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 4088.076754] IP: rds_ib_recv_refill+0x87/0x620 [rds_rdma] [ 4088.082686] PGD 0 P4D 0 [ 4088.085515] Oops: 0000 [#1] SMP [ 4088.089015] Modules linked in: rds_rdma(OE) rds(OE) rpcsec_gss_krb5(E) nfsv4(E) dns_resolver(E) nfs(E) fscache(E) mlx4_ib(E) ib_ipoib(E) rdma_ucm(E) ib_ucm(E) ib_uverbs(E) ib_umad(E) rdma_cm(E) ib_cm(E) iw_cm(E) ib_core(E) binfmt_misc(E) sb_edac(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) ghash_clmulni_intel(E) pcbc(E) aesni_intel(E) crypto_simd(E) iTCO_wdt(E) glue_helper(E) iTCO_vendor_support(E) sg(E) cryptd(E) pcspkr(E) ipmi_si(E) ipmi_devintf(E) ipmi_msghandler(E) shpchp(E) ioatdma(E) i2c_i801(E) wmi(E) lpc_ich(E) mei_me(E) mei(E) mfd_core(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) ip_tables(E) ext4(E) mbcache(E) jbd2(E) fscrypto(E) mgag200(E) i2c_algo_bit(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) [ 4088.168486] fb_sys_fops(E) ahci(E) ixgbe(E) libahci(E) ttm(E) mdio(E) ptp(E) pps_core(E) drm(E) sd_mod(E) libata(E) crc32c_intel(E) mlx4_core(E) i2c_core(E) dca(E) megaraid_sas(E) dm_mirror(E) dm_region_hash(E) dm_log(E) dm_mod(E) [last unloaded: rds] [ 4088.193442] CPU: 20 PID: 1244 Comm: kworker/20:2 Tainted: G OE 4.14.0-rc7.master.20171105.ol7.x86_64 #1 [ 4088.205097] Hardware name: Oracle Corporation ORACLE SERVER X5-2L/ASM,MOBO TRAY,2U, BIOS 31110000 03/03/2017 [ 4088.216074] Workqueue: ib_cm cm_work_handler [ib_cm] [ 4088.221614] task: ffff885fa11d0000 task.stack: ffffc9000e598000 [ 4088.228224] RIP: 0010:rds_ib_recv_refill+0x87/0x620 [rds_rdma] [ 4088.234736] RSP: 0018:ffffc9000e59bb68 EFLAGS: 00010286 [ 4088.240568] RAX: 0000000000000000 RBX: ffffc9002115d050 RCX: ffffc9002115d050 [ 4088.248535] RDX: ffffffffa0521380 RSI: ffffffffa0522158 RDI: ffffffffa0525580 [ 4088.256498] RBP: ffffc9000e59bbf8 R08: 0000000000000005 R09: 0000000000000000 [ 4088.264465] R10: 0000000000000339 R11: 0000000000000001 R12: 0000000000000000 [ 4088.272433] R13: ffff885f8c9d8000 R14: ffffffff81a0a060 R15: ffff884676268000 [ 4088.280397] FS: 0000000000000000(0000) GS:ffff885fbec80000(0000) knlGS:0000000000000000 [ 4088.289434] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4088.295846] CR2: 0000000000000020 CR3: 0000000001e09005 CR4: 00000000001606e0 [ 4088.303816] Call Trace: [ 4088.306557] rds_ib_cm_connect_complete+0xe0/0x220 [rds_rdma] [ 4088.312982] ? __dynamic_pr_debug+0x8c/0xb0 [ 4088.317664] ? __queue_work+0x142/0x3c0 [ 4088.321944] rds_rdma_cm_event_handler+0x19e/0x250 [rds_rdma] [ 4088.328370] cma_ib_handler+0xcd/0x280 [rdma_cm] [ 4088.333522] cm_process_work+0x25/0x120 [ib_cm] [ 4088.338580] cm_work_handler+0xd6b/0x17aa [ib_cm] [ 4088.343832] process_one_work+0x149/0x360 [ 4088.348307] worker_thread+0x4d/0x3e0 [ 4088.352397] kthread+0x109/0x140 [ 4088.355996] ? rescuer_thread+0x380/0x380 [ 4088.360467] ? kthread_park+0x60/0x60 [ 4088.364563] ret_from_fork+0x25/0x30 [ 4088.368548] Code: 48 89 45 90 48 89 45 98 eb 4d 0f 1f 44 00 00 48 8b 43 08 48 89 d9 48 c7 c2 80 13 52 a0 48 c7 c6 58 21 52 a0 48 c7 c7 80 55 52 a0 <4c> 8b 48 20 44 89 64 24 08 48 8b 40 30 49 83 e1 fc 48 89 04 24 [ 4088.389612] RIP: rds_ib_recv_refill+0x87/0x620 [rds_rdma] RSP: ffffc9000e59bb68 [ 4088.397772] CR2: 0000000000000020 [ 4088.401505] ---[ end trace fe922e6ccf004431 ]--- This bug was provoked by compiling rds out-of-tree with EXTRA_CFLAGS="-DRDS_DEBUG -DDEBUG" and inserting an artificial delay between the rdsdebug() and ib_ib_port_recv() statements: /* XXX when can this fail? */ ret = ib_post_recv(ic->i_cm_id->qp, &recv->r_wr, &failed_wr); + if (can_wait) + usleep_range(1000, 5000); rdsdebug("recv %p ibinc %p page %p addr %lu ret %d\n", recv, recv->r_ibinc, sg_page(&recv->r_frag->f_sg), (long) ib_sg_dma_address( The fix is simply to move the rdsdebug() statement up before the ib_post_recv() and remove the printing of ret, which is taken care of anyway by the non-debug code. Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Knut Omang <knut.omang@oracle.com> Reviewed-by: Wei Lin Guay <wei.lin.guay@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10Merge branch 'ip_gre-flags-update'David S. Miller
Xin Long says: ==================== ip_gre: add support for i/o_flags update ip_gre is using as many ip_tunnel apis as possible, newlink works fine as gre would do it's own part in .ndo_init. But when changing link, ip_tunnel_changelink doesn't even update i/o_flags, and also the update of these flags would cause some other gre's properties need to be updated or recalculated. These two patch are to add i/o_flags update and then do adjustment on some gre's properties according to the new i/o_flags. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10ip_gre: add the support for i/o_flags update via ioctlXin Long
As patch 'ip_gre: add the support for i/o_flags update via netlink' did for netlink, we also need to do the same job for these update via ioctl. This patch is to update i/o_flags and call ipgre_link_update to recalculate these gre properties after ip_tunnel_ioctl does the common update. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10ip_gre: add the support for i/o_flags update via netlinkXin Long
Now ip_gre is using ip_tunnel_changelink to update it's properties, but ip_tunnel_changelink in ip_tunnel doesn't update i/o_flags as a common function. o_flags updates would cause that tunnel->tun_hlen / hlen and dev->mtu / needed_headroom need to be recalculated, and dev->(hw_)features need to be updated as well. Therefore, we can't just add the update into ip_tunnel_update called in ip_tunnel_changelink, and it's also better not to touch ip_tunnel codes. This patch updates i/o_flags and calls ipgre_link_update to recalculate these gre properties after ip_tunnel_changelink does the common update. Note that since ipgre_link_update doesn't know the lower dev, it will update gre->hlen, dev->mtu and dev->needed_headroom with the value of 'new tun_hlen - old tun_hlen'. In this way, we can avoid many redundant codes, unlike ip6_gre. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10Merge branch 'tcp-ns-rmem-wmem'David S. Miller
Eric Dumazet says: ==================== net: Namespace-ify sysctl_tcp_rmem and sysctl_tcp_wmem We need to get per netns sysctl for sysctl_[proto]_rmem and sysctl_[proto]_wmem This patch series adds the basic infrastructure allowing per proto conversion, and takes care of TCP. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10tcp: Namespace-ify sysctl_tcp_rmem and sysctl_tcp_wmemEric Dumazet
Note that when a new netns is created, it inherits its sysctl_tcp_rmem and sysctl_tcp_wmem from initial netns. This change is needed so that we can refine TCP rcvbuf autotuning, to take RTT into consideration. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: allow per netns sysctl_rmem and sysctl_wmem for protosEric Dumazet
As we want to gradually implement per netns sysctl_rmem and sysctl_wmem on per protocol basis, add two new fields in struct proto, and two new helpers : sk_get_wmem0() and sk_get_rmem0() First user will be TCP. Then UDP and SCTP can be easily converted, while DECNET probably wont get this support. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: dsa: Don't add vlans when vlan filtering is disabledAndrew Lunn
The software bridge can be build with vlan filtering support included. However, by default it is turned off. In its turned off state, it still passes VLANs via switchev, even though they are not to be used. Don't pass these VLANs to the hardware. Only do so when vlan filtering is enabled. This fixes at least one corner case. There are still issues in other corners, such as when vlan_filtering is later enabled. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10Merge tag 'mlx5-updates-2017-11-09' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2017-11-09 This series introduces vlan offloads related improvements for mlx5 ethernet netdev driver, from Gal Pressman. - Add support for 802.1ad vlan filter - Add support for 802.1ad vlan insertion - Add vlan offloads statistics to ethtool (inserted/stripped vlans) - CHECKSUM_COMPLETE support for vlan traffic when vlan stripping is off! (Finally) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10Merge branch 'IGMP-snooping-for-local-traffic'David S. Miller
Andrew Lunn says: ==================== IGMP snooping for local traffic The linux bridge supports IGMP snooping. It will listen to IGMP reports on bridge ports and keep track of which groups have been joined on an interface. It will then forward multicast based on this group membership. When the bridge adds or removed groups from an interface, it uses switchdev to request the hardware add an mdb to a port, so the hardware can perform the selective forwarding between ports. What is not covered by the current bridge code, is IGMP joins/leaves from the host on the brX interface. These are not reported via switchdev so that hardware knows the local host is interested in the multicast frames. Luckily, the bridge does track joins/leaves on the brX interface. The code is obfusticated, which is why i missed it with my first attempt. So the first patch tries to remove this obfustication. Currently, there is no notifications sent when the bridge interface joins a group. The second patch adds them. bridge monitor then shows joins/leaves in the same way as for other ports of the bridge. Then starts the work passing down to the hardware that the host has joined/left a group. The existing switchdev mdb object cannot be used, since the semantics are different. The existing SWITCHDEV_OBJ_ID_PORT_MDB is used to indicate a specific multicast group should be forwarded out that port of the switch. However here we require the exact opposite. We want multicast frames for the group received on the port to the forwarded to the host. Hence add a new object SWITCHDEV_OBJ_ID_HOST_MDB, a multicast database entry to forward to the host. This new object is then propagated through the DSA layers. No DSA driver changes should be needed, this should just work... This version fixes up the nitpick from Nikolay, removes an unrelated white space change, and adds in a patch adding a few const attributes to a couple of functions taking a port parameter, in order to stop the following patch produces warnings. ==================== Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: dsa: switch: Don't add CPU port to an mdb by defaultAndrew Lunn
Now that the host indicates when a multicast group should be forwarded from the switch to the host, don't do it by default. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: dsa: add more const attributesAndrew Lunn
The notify mechanism does not need to modify the port it is notifying. So make the parameter const. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: dsa: slave: Handle switchdev host mdb add/delAndrew Lunn
Add code to handle switchdev host mdb add/del. Since DSA uses one of the switch ports as a transport to the host, we just need to add an MDB on this port. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: bridge: Add/del switchdev object on host join/leaveAndrew Lunn
When the host joins or leaves a multicast group, use switchdev to add an object to the hardware to forward traffic for the group to the host. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: bridge: Send notification when host join/leaves a groupAndrew Lunn
The host can join or leave a multicast group on the brX interface, as indicated by IGMP snooping. This is tracked within the bridge multicast code. Send a notification when this happens, in the same way a notification is sent when a port of the bridge joins/leaves a group because of IGMP snooping. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: bridge: Rename mglist to host_joinedAndrew Lunn
The boolean mglist indicates the host has joined a particular multicast group on the bridge interface. It is badly named, obscuring what is means. Rename it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09xfs: on failed mount, force-reclaim inodes after unmounting quota controlsDarrick J. Wong
When mounting fails, we must force-reclaim inodes (and disable delayed reclaim) /after/ the realtime and quota control have let go of the realtime and quota inodes. Without this, we corrupt the timer list and cause other weird problems. Found by xfs/376 fuzzing u3.bmbt[0].lastoff on an rmap filesystem to force a bogus post-eof extent reclaim that causes the fs to go down. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2017-11-09xfs: check the uniqueness of the AGFL entriesDarrick J. Wong
Make sure we don't list a block twice in the agfl by copying the contents of the AGFL to an array, sorting it, and looking for duplicates. We can easily check that the number of agfl entries we see actually matches the flcount, so do that too. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2017-11-10rsi: rsi_91x_ps: remove redundant code in str_psstateGustavo A. R. Silva
"INVALID_STATE" is already being returned in the default case and this code cannot be reached. Addresses-Coverity-ID: 1398384 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10rt2x00: use monotonic timestamps for frame dumpArnd Bergmann
rt2x00 uses the deprecated do_gettimeofday() function to get a timestamp for its debugfs "dump" file interface. The timestamp is using an unsigned 32-bit value, so we could make it work until 2106 by using ktime_get_real_ts64(), but it seems better to use monotonic times, as we normally want for timestamps. Since this is an interface change, I'm incrementing the DUMP_HEADER_VERSION number, so user space can figure out whether the timestamps are monotonic or not. Most likely the tools won't care either way. Generally speaking, ABI version numbers and in particular changing them is a bad idea. However since this is in debugfs, we don't put any API stability rules on the interface according to Documentation/filesystems/debugfs.txt, and we can take the easy way out here; anyone using the frame dump feature can probably work out the differences here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10rt2x00usb: mark device removed when get ENOENT usb errorStanislaw Gruszka
ENOENT usb error mean "specified interface or endpoint does not exist or is not enabled". Mark device not present when we encounter this error similar like we do with ENODEV error. Otherwise we can have infinite loop in rt2x00usb_work_rxdone(), because we remove and put again RX entries to the queue infinitely. We can have similar situation when submit urb will fail all the time with other error, so we need consider to limit number of entries processed by rxdone work. But for now, since the patch fixes reproducible soft lockup issue on single processor systems and taken ENOENT error meaning, let apply this fix. Patch adds additional ENOENT check not only in rx kick routine, but also on other places where we check for ENODEV error. Reported-by: Richard Genoud <richard.genoud@gmail.com> Debugged-by: Richard Genoud <richard.genoud@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: pass all CONNECT cmd params to wireless card for processingIgor Mitsyanko
Specifically, following parameters are needed for wireless device configuration but were not available to it before: - HT/VHT capabilities and capabilities masks. - full channel info (not just IEEE number) - BSSID hint - previous BSSID for reassoc request Move Management Frame Protection setting from common encr info structure into STA-specific .connect command parameters. Make sure that all new qlink structure definitions are alignment-safe. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: include HTCAP and VHTCAP into config AP commandIgor Mitsyanko
Include HT/VHT caps directly into command so that they won't have to be searched for in IEs. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: configure and start AP interface with a single commandIgor Mitsyanko
Current logic artificially divides "start AP" procedure into three stages: - generic interface configuration (security, channel etc) - IE's processing - enable AP mode on interface This separation would not allow to do a proper device configuration as first stage needs to use information from IEs that are processed on a second stage. Which means first and second stages have to be meged. In that case there is no point anymore to keep third stage either, so merge all three into a single command. This new command carries all the same info as contained in "struct cfg80211_ap_settings". Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: convert "Append IEs" command to QTN_TLV_ID_IE_SET usageIgor Mitsyanko
Data contained within "Append IEs" command (QLINK_CMD_MGMT_SET_APPIE) duplicates QTN_TLV_ID_IE_SET TLV. Convert the command to use that TLV instead. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: SCAN results: retreive frame type information from "IE set" TLVIgor Mitsyanko
"IE set" TLV carries the same information as qlink_event_scan_result::frame_type. Convert the event to make use of TLV and drop frame_type member. While at it, make qlink_event_scan_result structure alignement-safe. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: extend "IE set" TLV to include frame type infoIgor Mitsyanko
Specifying frame type for "IE set" TLV will allow to use several TLVs in a single message. Modify users accordingly. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: get rid of PHYMODE capabilities flagsIgor Mitsyanko
Supported WiFi operation modes are now identified per-band based on HT/VHT capabilities of each band. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: initialize HT/VHT caps "can override" masksIgor Mitsyanko
Information on which HT/VHT capabilities can be overridden is reported per-MAC by wireless device. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: use per-band HT/VHT info from wireless deviceIgor Mitsyanko
HT/VHT capabilities must be reported per each band supported by a radio, not for all bands on a radio. Furthermore, driver better not assume any capabilities and just use whetever is reported by device itself. To support this, convert "get channels" command into "get band info" command. Difference is that it may also carry HT/VHT capabilities along with channels information. While at it, also add "num_bitrates" field to "get band info" command, for future use. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: move configuration of probe request IEsArend Van Spriel
The configuration of the IEs for probe requests was done in a P2P related function, which is not very obvious. Moving it to .scan callback function, ie. brcmf_cfg80211_scan(). Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: get rid of struct brcmf_cfg80211_info::active_scan fieldArend Van Spriel
The field struct brcmf_cfg80211_info::active_scan is set to true upon initializing the driver instance, but it is never changed so simply get rid of it. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: get rid of brcmf_cfg80211_escan() functionArend Van Spriel
The function brcmf_cfg80211_escan() is only called by brcmf_cfg80211_scan() so there is no reason to split in two function especially since the latter does not do an awful lot. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: use msecs_to_jiffies() instead of calculation using HZArend Van Spriel
Minor cleanup using provided macro to convert milliseconds interval to jiffies in brcmf_cfg80211_escan(). Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: cleanup brcmf_cfg80211_escan() functionArend Van Spriel
The function brcmf_cfg80211_escan() was always called with a non-null request parameter and null pointer for this_ssid parameter. Clean up the function removing the dead code path. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: disable packet filtering in promiscuous modeFranky Lin
Disable arp and nd offload to allow all packets sending to host. Reported-by: Phil Elwell <phil@raspberrypi.org> Tested-by: Phil Elwell <phil@raspberrypi.org> Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: handle FWHALT mailbox indicationArend Van Spriel
The firmware uses a mailbox to communicate to the host what is going on. In the driver we validate the bit received. Various people seen the following message: brcmfmac: brcmf_sdio_hostmail: Unknown mailbox data content: 0x40012 Bit 4 is cause of this message, but this actually indicates the firmware has halted. Handle this bit by giving a more meaningful error message. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-13 09:42:18 +0000