summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-01-10drm/i915: Revert shrinker changes from "Track unbound pages"Daniel Vetter
This partially reverts commit 6c085a728cf000ac1865d66f8c9b52935558b328 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Aug 20 11:40:46 2012 +0200 drm/i915: Track unbound pages Closer inspection of that patch revealed a bunch of unrelated changes in the shrinker: - The shrinker count is now in pages instead of objects. - For counting the shrinkable objects the old code only looked at the inactive list, the new code looks at all bounds objects (including pinned ones). That is obviously in addition to the new unbound list. - The shrinker cound is no longer scaled with sysctl_vfs_cache_pressure. Note though that with the default tuning value of vfs_cache_pressue = 100 this doesn't affect the shrinker behaviour. - When actually shrinking objects, the old code first dropped purgeable objects, then normal (inactive) objects. Only then did it, in a last-ditch effort idle the gpu and evict everything. The new code omits the intermediate step of evicting normal inactive objects. Safe for the first change, which seems benign, and the shrinker count scaling, which is a bit a different story, the endresult of all these changes is that the shrinker is _much_ more likely to fall back to the last-ditch resort of idling the gpu and evicting everything. The old code could only do that if something else evicted lots of objects meanwhile (since without any other changes the nr_to_scan will be smaller than the object count). Reverting the vfs_cache_pressure behaviour itself is a bit bogus: Only dentry/inode object caches should scale their shrinker counts with vfs_cache_pressure. Originally I've had that change reverted, too. But Chris Wilson insisted that it's too bogus and shouldn't again see the light of day. Hence revert all these other changes and restore the old shrinker behaviour, with the minor adjustment that we now first scan the unbound list, then the inactive list for each object category (purgeable or normal). A similar patch has been tested by a few people affected by the gen4/5 hangs which started to appear in 3.7, which some people bisected to the "drm/i915: Track unbound pages" commit. But just disabling the unbound logic alone didn't change things at all. Note that this patch doesn't fix the referenced bugs, it only hides the underlying bug(s) well enough to restore pre-3.7 behaviour. The key to achieve that is to massively reduce the likelyhood of going into a full gpu stall and evicting everything. v2: Reword commit message a bit, taking Chris Wilson's comment into account. v3: On Chris Wilson's insistency, do not reinstate the rather bogus vfs_cache_pressure change. Tested-by: Greg KH <gregkh@linuxfoundation.org> Tested-by: Dave Kleikamp <dave.kleikamp@oracle.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=55984 References: https://bugs.freedesktop.org/show_bug.cgi?id=57122 References: https://bugs.freedesktop.org/show_bug.cgi?id=56916 References: https://bugs.freedesktop.org/show_bug.cgi?id=57136 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-10Merge tag 'asoc-fix-3.8-rc2' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.8 Nothing terribly exciting here except for the DOUBLE_RANGE fix which just hadn't worked before, nobody noticed due to lack of use.
2013-01-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "Add the finit_module system call, fix the irq statistics in /proc/stat, fix a s390dbf lockdep problem, a patch revert for a problem that is not 100% understood yet, and a few patches to fix warnings." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: define read*_relaxed functions s390/topology: export cpu_topology s390/pm: export pm_power_off s390/pci: define isa_dma_bridge_buggy s390/3215: partially revert tty close handling fix s390/irq: count cpu restart events s390/irq: remove split irq fields from /proc/stat s390/irq: enable irq sum accounting for /proc/stat again s390/syscalls: wire up finit_module syscall s390/pci: remove dead code s390/smp: fix section mismatch for smp_add_present_cpu() s390/debug: Fix s390dbf lockdep problem in debug_(un)register_view()
2013-01-10Merge remote-tracking branch 'asoc/fix/wm5100' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/wm2200' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/wm2000' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/wm-adsp' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/sta529' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/sgtl5000' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/pxa' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/lm49453' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/cs42l52' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/cs4271' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/core' into tmpMark Brown
2013-01-10Merge remote-tracking branch 'asoc/fix/arizona' into tmpMark Brown
2013-01-10netfilter: xt_CT: fix unset return value if conntrack zone are disabledPablo Neira Ayuso
net/netfilter/xt_CT.c: In function ‘xt_ct_tg_check_v1’: net/netfilter/xt_CT.c:250:6: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized] net/netfilter/xt_CT.c: In function ‘xt_ct_tg_check_v0’: net/netfilter/xt_CT.c:112:6: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized] Reported-by: Borislav Petkov <bp@alien8.de> Acked-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-01-10ALSA: hda - Add support of new codec ALC284Kailang Yang
Added the support for a new codec ALC284, which is compatible with ALC269. Also add more codec variants to handle the SSID check properly. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10ALSA: usb-audio: Make ebox44_table staticSachin Kamat
Fixes the following sparse warning: sound/usb/mixer_quirks.c:1209:23: warning: symbol 'ebox44_table' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10Bluetooth: Check if the hci connection exists in SCO shutdownGustavo Padovan
Checking only for sco_conn seems to not be enough and lead to NULL dereferences in the code, check for hcon instead. <1>[11340.226404] BUG: unable to handle kernel NULL pointer dereference at 0000000 8 <4>[11340.226619] EIP is at __sco_sock_close+0xe8/0x1a0 <4>[11340.226629] EAX: f063a740 EBX: 00000000 ECX: f58f4544 EDX: 00000000 <4>[11340.226640] ESI: dec83e00 EDI: 5f9a081f EBP: e0fdff38 ESP: e0fdff1c <0>[11340.226674] Stack: <4>[11340.226682] c184db87 c1251028 dec83e00 e0fdff38 c1754aef dec83e00 00000000 e0fdff5c <4>[11340.226718] c184f587 e0fdff64 e0fdff68 5f9a081f e0fdff5c c1751852 d7813800 62262f10 <4>[11340.226752] e0fdff70 c1753c00 00000000 00000001 0000000d e0fdffac c175425c 00000041 <0>[11340.226793] Call Trace: <4>[11340.226813] [<c184db87>] ? sco_sock_clear_timer+0x27/0x60 <4>[11340.226831] [<c1251028>] ? local_bh_enable+0x68/0xd0 <4>[11340.226846] [<c1754aef>] ? lock_sock_nested+0x4f/0x60 <4>[11340.226862] [<c184f587>] sco_sock_shutdown+0x67/0xb0 <4>[11340.226879] [<c1751852>] ? sockfd_lookup_light+0x22/0x80 <4>[11340.226897] [<c1753c00>] sys_shutdown+0x30/0x60 <4>[11340.226912] [<c175425c>] sys_socketcall+0x1dc/0x2a0 <4>[11340.226929] [<c149ba78>] ? trace_hardirqs_on_thunk+0xc/0x10 <4>[11340.226944] [<c18860f1>] syscall_call+0x7/0xb <4>[11340.226960] [<c1880000>] ? restore_cur+0x5e/0xd7 <0>[11340.226969] Code: <f0> ff 4b 08 0f 94 c0 84 c0 74 20 80 7b 19 01 74 2f b8 0a 00 00 Reported-by: Chuansheng Liu <chuansheng.liu@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09hwmon: (vexpress) Fix build error seen if CONFIG_OF_DEVICE is not setGuenter Roeck
Fix: vexpress.c: In function ‘vexpress_hwmon_name_show’: vexpress.c:34:2: error: implicit declaration of function ‘of_get_property’ [-Werror=implicit-function-declaration] vexpress.c:34:27: warning: initialization makes pointer from integer without a cast [enabled by default] vexpress.c: In function ‘vexpress_hwmon_label_show’: vexpress.c:43:22: warning: initialization makes pointer from integer without a cast [enabled by default] Seen if CONFIG_OF_DEVICE is not defined. of_get_property is declared in of.h which is only included by of_device.h if CONFIG_OF_DEVICE is defined. of.h needs to be included directly. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-01-10Bluetooth: Fix authentication if acl data comes before remote feature evtJaganath Kanakkassery
If remote device sends l2cap info request before read_remote_ext_feature completes then mgmt_connected will be sent in hci_acldata_packet() and remote name request wont be sent and eventually authentication wont happen Hcidump log of the issue < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr BC:85:1F:74:7F:29 ptype 0xcc18 rswitch 0x01 clkoffset 0x4bf7 (valid) Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 12 bdaddr BC:85:1F:74:7F:29 type ACL encrypt 0x00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 12 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 > HCI Event: Max Slots Change (0x1b) plen 3 handle 12 slots 5 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 12 page 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < ACL data: handle 12 flags 0x00 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00b8 Enhanced Retransmission mode Streaming mode FCS Option Fixed Channels > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 12 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 3 < ACL data: handle 12 flags 0x00 dlen 20 L2CAP(s): Info rsp: type 3 result 0 Fixed channel list 0x00000002 L2CAP Signalling Channel > HCI Event: Number of Completed Packets (0x13) plen 5 handle 12 packets 2 This patch moves sending mgmt_connected from hci_acldata_packet() to l2cap_connect_req() since this code is to handle the scenario remote device sends l2cap connect req too fast Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-10Bluetooth device 04ca:3008 should use ath3kSergio Cambra
Output of /sys/kernel/debug/usb/devices T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3008 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Sergio Cambra <sergio@programatica.es> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09Linux 3.8-rc3v3.8-rc3Linus Torvalds
2013-01-09tracing: Fix regression of trace_options file settingSteven Rostedt
The latest change to allow trace options to be set on the command line also broke the trace_options file. The zeroing of the last byte of the option name that is echoed into the trace_option file was removed with the consolidation of some of the code. The compare between the option and what was written to the trace_options file fails because the string holding the data written doesn't terminate with a null character. A zero needs to be added to the end of the string copied from user space. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-09Bluetooth: Fix incorrect strncpy() in hidp_setup_hid()Anderson Lizardo
The length parameter should be sizeof(req->name) - 1 because there is no guarantee that string provided by userspace will contain the trailing '\0'. Can be easily reproduced by manually setting req->name to 128 non-zero bytes prior to ioctl(HIDPCONNADD) and checking the device name setup on input subsystem: $ cat /sys/devices/pnp0/00\:04/tty/ttyS0/hci0/hci0\:1/input8/name AAAAAA[...]AAAAAAAAf0:af:f0:af:f0:af ("f0:af:f0:af:f0:af" is the device bluetooth address, taken from "phys" field in struct hid_device due to overflow.) Cc: stable@vger.kernel.org Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09Bluetooth: Add support for Foxconn / Hon Hai [0489:e056]AceLan Kao
Add support for the AR9462 chip T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e056 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09Bluetooth: Add support for Foxconn / Hon Hai [0489:e04e]AceLan Kao
Add support for the AR9462 chip T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e04e Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09Bluetooth: Add support for GC-WB300D PCIe [04ca:3006] to ath3k.Daniel Schaal
T: Bus=02 Lev=02 Prnt=02 Port=06 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3006 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Daniel Schaal <farbing@web.de> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09Bluetooth: Add support for IMC Networks [13d3:3393]AceLan Kao
Add support for the AR9462 chip T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3393 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09Bluetooth: Fix sending HCI commands after resetSzymon Janc
After sending reset command wait for its command complete event before sending next command. Some chips sends CC event for command received before reset if reset was send before chip replied with CC. This is also required by specification that host shall not send additional HCI commands before receiving CC for reset. < HCI Command: Reset (0x03|0x0003) plen 0 [hci0] 18.404612 > HCI Event: Command Complete (0x0e) plen 4 [hci0] 18.405850 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0] 18.406079 > HCI Event: Command Complete (0x0e) plen 4 [hci0] 18.407864 Reset (0x03|0x0003) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0] 18.408062 > HCI Event: Command Complete (0x0e) plen 12 [hci0] 18.408835 Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Cc: stable@vger.kernel.org Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King. * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7616/1: cache-l2x0: aurora: Use writel_relaxed instead of writel ARM: 7615/1: cache-l2x0: aurora: Invalidate during clean operation with WT enable ARM: 7614/1: mm: fix wrong branch from Cortex-A9 to PJ4b ARM: 7612/1: imx: Do not select some errata that depends on !ARCH_MULTIPLATFORM ARM: 7611/1: VIC: fix bug in VIC irqdomain code ARM: 7610/1: versatile: bump IRQ numbers ARM: 7609/1: disable errata work-arounds which access secure registers ARM: 7608/1: l2x0: Only set .set_debug on PL310 r3p0 and earlier
2013-01-09Merge tag 'edac_fixes_for_3.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC fixes from Borislav Petkov: "Two error path fixes causing a crash and a Kconfig fix for an issue which spilled all EDAC suboptions into the 'Device Drivers' menu." * tag 'edac_fixes_for_3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: Cleanup device deregistering path EDAC: Fix EDAC Kconfig menu EDAC: Fix kernel panic on module unloading
2013-01-09mm: reinstante dropped pmd_trans_splitting() checkLinus Torvalds
The check for a pmd being in the process of being split was dropped by mistake by commit d10e63f29488 ("mm: numa: Create basic numa page hinting infrastructure"). Put it back. Reported-by: Dave Jones <davej@redhat.com> Debugged-by: Hillf Danton <dhillf@gmail.com> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Kirill Shutemov <kirill@shutemov.name> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-09cred: Remove tgcred pointer from struct credMarc Dionne
Commit 3a50597de863 ("KEYS: Make the session and process keyrings per-thread") removed the definition of the thread_group_cred structure, but left a now unused pointer in struct cred. Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-09Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-01-09ALSA: hdspm - Fix wordclock status on AES32Andre Schramm
Use correct bitmask for AES32 cards to determine wordclock lock state, add missing bitmask for sync check and make output of the corresponding control and /proc coherent. Signed-off-by: Andre Schramm <andre.schramm@iosono-sound.com> Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-09drm/i915: Use pixel size for computing linear offsets into a spriteChris Wilson
This fixes an original bug in the sprite code that miscomputed the source offset into a linear YUV packed framebuffer, that was magnified into an oops with commit 5a35e99e8162d6820013a56ad15ea8bf937af5a6 Author: Damien Lespiau <damien.lespiau@intel.com> Date: Fri Oct 26 18:20:12 2012 +0100 drm/i915: adjust sprite base address Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.com> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-09Revert "ALSA: hda - Shut up pins at power-saving mode with Conexnat codecs"David Henningsson
This reverts commit 697c373e34613609cb5450f98b91fefb6e910588. The original patch was meant to remove clicking, but in fact caused even more clicking instead. Thanks to c4pp4 for doing most of the work with this bug. BugLink: https://bugs.launchpad.net/bugs/886975 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-09ALSA: hda - Disable runtime D3 for Intel CPT & coTakashi Iwai
We've got a few bug reports that the runtime D3 results in the dead HD-audio controller. It seems that the problem is in a deeper level than the sound driver itself, so as a temporal solution, disable the feature for these controllers again. Reported-and-tested-by: Vincent Blut <vincent.debian@free.fr> Reported-and-tested-by: Maurizio Avogadro <mavoga@gmail.com> Cc: <stable@vger.kernel.org> [v3.7] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-08Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC fixes from Olof Johansson: "People are back from the holiday breaks, and it shows. Here are a bunch of fixes for a number of platforms: - A couple of small fixes for Nomadik - A larger set of changes for kirkwood/mvebu - uart driver selection, dt clocks, gpio-poweroff fixups, a few __init annotation fixes and some error handling improvement in their xor dma driver. - i.MX had a couple of minor fixes (and a critical one for flexcan2 clock setup) - MXS has a small board fix and a framebuffer bugfix - A set of fixes for Samsung Exynos, fixing default bootargs and some Exynos5440 clock issues - A set of OMAP changes including PM fixes and a few sparse warning fixups All in all a bit more positive code delta than we'd ideally want to see here, mostly from the OMAP PM changes, but nothing overly crazy." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers ...
2013-01-08net: prevent setting ttl=0 via IP_TTLCong Wang
A regression is introduced by the following commit: commit 4d52cfbef6266092d535237ba5a4b981458ab171 Author: Eric Dumazet <eric.dumazet@gmail.com> Date: Tue Jun 2 00:42:16 2009 -0700 net: ipv4/ip_sockglue.c cleanups Pure cleanups but it is not a pure cleanup... - if (val != -1 && (val < 1 || val>255)) + if (val != -1 && (val < 0 || val > 255)) Since there is no reason provided to allow ttl=0, change it back. Reported-by: nitin padalia <padalia.nitin@gmail.com> Cc: nitin padalia <padalia.nitin@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-08Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm update from Dave Airlie: "Exynos and Radeon mostly, with a dma-buf and ttm fix thrown in. It's a bit big but its mostly exynos license fix ups and I'd rather not hold those up since its legally stuff. Radeon has a couple of fixes from dma engine work, TTM is just a locking fix, and dma-buf fix has been hanging around and I finally got a chance to review it." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (30 commits) drm/ttm: fix fence locking in ttm_buffer_object_transfer drm/prime: drop reference on imported dma-buf come from gem drm/radeon: add quirk for d3 delay during switcheroo poweron for apple macbooks drm/exynos: move finish page flip to a common place drm/exynos: fimd: modify condition in fimd resume drm/radeon: fix DMA CS parser for r6xx linear copy packet drm/radeon: split r6xx and r7xx copy_dma functions drm/exynos: Use devm_clk_get in exynos_drm_gsc.c drm/exynos: Remove redundant NULL check in exynos_drm_gsc.c drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_gsc.c drm/exynos: Use devm_clk_get in exynos_drm_rotator.c drm/exynos: Remove redundant NULL check in exynos_drm_rotator.c drm/exynos: Remove unnecessary devm_* freeing APIs in exynos_drm_rotator.c drm/exynos: Use devm_clk_get in exynos_drm_fimc.c drm/exynos: Remove redundant NULL check drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_fimc.c drm/exynos: Use devm_kzalloc in exynos_drm_ipp.c drm/exynos: fix gem buffer allocation type checking drm/exynos: remove needless parenthesis. drm/exynos: fix incorrect interrupt induced by m2m operation. ...
2013-01-08SUNRPC: Ensure we release the socket write lock if the rpc_task exits earlyTrond Myklebust
If the rpc_task exits while holding the socket write lock before it has allocated an rpc slot, then the usual mechanism for releasing the write lock in xprt_release() is defeated. The problem occurs if the call to xprt_lock_write() initially fails, so that the rpc_task is put on the xprt->sending wait queue. If the task exits after being assigned the lock by __xprt_lock_write_func, but before it has retried the call to xprt_lock_and_alloc_slot(), then it calls xprt_release() while holding the write lock, but will immediately exit due to the test for task->tk_rqstp != NULL. Reported-by: Chris Perl <chris.perl@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org [>= 3.1]
2013-01-08Merge tag 'omap-for-v3.8-rc2/fixes-signed-v2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: The biggest change is a fix to deal with different power state on omap2 registers that causes issues trying to use common PM code. Also fix few incorrect registers, and an issue for omap1 USB, and few sparse fixes for issues that sneaked in with all the clean-up. * tag 'omap-for-v3.8-rc2/fixes-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array ARM: OMAP1: fix USB configuration use-after-release ARM: OMAP2/3: PRM: fix bogus OMAP2xxx powerstate return values ARM: OMAP3: clock data: Add missing enable/disable for EMU clock ARM: OMAP4: PRM: Correct wrong instance usage for reading reset sources ARM: OMAP4: PRM: fix RSTTIME and RSTST offsets ARM: OMAP4: PRM: Correct reset source map ARM: OMAP: SRAM: resolve sparse warnings ARM: OMAP AM33xx: hwmod data: resolve sparse warnings ARM: OMAP: 32k counter: resolve sparse warnings Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-08Merge branch 'v3.8-samsung-fixes-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim: Most of them are EXYNOS5440 fixes which are for changing uart console, cpu id (typo) and silent complaining gpio error in kernel boot. * 'v3.8-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: skip the clock initialization for exynos5440 ARM: EXYNOS: enable PINCTRL for EXYNOS5440 ARM: dts: use uart port1 for console on exynos4210-smdkv310 ARM: dts: use uart port0 for console on exynos5440-ssdk5440 ARM: SAMSUNG: fix the cpu id for EXYNOS5440 ARM: EXYNOS: Revise HDMI resource size
2013-01-08drm/i915: Add DEBUG messages to all intel_create_user_framebuffer error pathsChris Wilson
This proves to be very useful when investigating why code suddenly started failing. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-08Merge tag 'mxs-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson
into fixes From Shawn Guo: I have to send one critical mxsfb fix through arm-soc, as FB maintainer is unresponsive for quite a while. People start complaining the missing of such an important fix. * tag 'mxs-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6: video: mxsfb: fix crash when unblanking the display ARM: dts: imx23-olinuxino: Fix IOMUX settings
2013-01-08Merge tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson
into fixes From Shawn Guo: It includes one critical fix - wrong flexcan2 clock will hang system when the port gets brought up. The other two are non-critical fixes, which are sent together here, since it's still early -rc stage. * tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mx5: Fix MX53 flexcan2 clock ARM: dts: imx31-bug: Fix manufacturer compatible string clk: imx: Remove 'clock-output-names' from the examples
2013-01-08Merge tag 'sound-3.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Nothing too exciting here, just a few regression and trivial fixes, and new quirks for HD-audio and USB-audio. - HD-audio mute LED mode enum fix - Fix kernel panic of Digidesign Mbox2 usb-audio quirk (which was new in 3.8-rc1) - Creative BT-D1 usb-audio quirk - mute LED fixup for HP Pavillion 17 laptop" * tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - add mute LED for HP Pavilion 17 (Realtek codec) ALSA: au88x0: fix incorrect left shift sound: oss/pas2: Fix possible access out of array ALSA: usb-audio: Fix kernel panic of Digidesign Mbox2 quirk ALSA: usb-audio: Add support for Creative BT-D1 via usb sound quirks ALSA: hda - Switch "On" and "Off" for "Mute-LED Mode" kcontrol
2013-01-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) New sysctl ndisc_notify needs some documentation, from Hanns Frederic Sowa. 2) Netfilter REJECT target doesn't set transport header of SKB correctly, from Mukund Jampala. 3) Forcedeth driver needs to check for DMA mapping failures, from Larry Finger. 4) brcmsmac driver can't use usleep_range while holding locks, use udelay instead. From Niels Ole Salscheider. 5) Fix unregister of netlink bridge multicast database handlers, from Vlad Yasevich and Rami Rosen. 6) Fix checksum calculations in netfilter's ipv6 network prefix translation module. 7) Fix high order page allocation failures in netfilter xt_recent, from Eric Dumazet. 8) mac802154 needs to use netif_rx_ni() instead of netif_rx() because mac802154_process_data() can execute in process rather than interrupt context. From Alexander Aring. 9) Fix splice handling of MSG_SENDPAGE_NOTLAST, otherwise we elide one tcp_push() too many. From Eric Dumazet and Willy Tarreau. 10) Fix skb->truesize tracking in XEN netfront driver, from Ian Campbell. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) xen/netfront: improve truesize tracking ipv4: fix NULL checking in devinet_ioctl() tcp: fix MSG_SENDPAGE_NOTLAST logic net/ipv4/ipconfig: really display the BOOTP/DHCP server's address. ip-sysctl: fix spelling errors mac802154: fix NOHZ local_softirq_pending 08 warning ipv6: document ndisc_notify in networking/ip-sysctl.txt ath9k: Fix Kconfig for ATH9K_HTC netfilter: xt_recent: avoid high order page allocations netfilter: fix missing dependencies for the NOTRACK target netfilter: ip6t_NPT: fix IPv6 NTP checksum calculation bridge: add empty br_mdb_init() and br_mdb_uninit() definitions. vxlan: allow live mac address change bridge: Correctly unregister MDB rtnetlink handlers brcmfmac: fix parsing rsn ie for ap mode. brcmsmac: add copyright information for Canonical rtlwifi: rtl8723ae: Fix warning for unchecked pci_map_single() call rtlwifi: rtl8192se: Fix warning for unchecked pci_map_single() call rtlwifi: rtl8192de: Fix warning for unchecked pci_map_single() call rtlwifi: rtl8192ce: Fix warning for unchecked pci_map_single() call ...
generated by cgit (git 2.34.1) at 2025-09-30 02:05:31 +0000