| Age | Commit message (Collapse) | Author |
|---|
|
Add OPP tables required to scale DDR and L3 per freq-domain
on SA8775P platform.
If a single OPP table is used for both CPU domains, then
_allocate_opp_table() won't be invoked for CPU4 but instead
CPU4 will be added as device under the CPU0 OPP table. Due
to this, dev_pm_opp_of_find_icc_paths() won't be invoked for
CPU4 device and hence CPU4 won't be able to independently scale
it's interconnects. Both CPU0 and CPU4 devices will scale the
same ICC path which can lead to one device overwriting the BW
vote placed by other device. Hence CPU0 and CPU4 require separate
OPP tables to allow independent scaling of DDR and L3 frequencies
for each CPU domain, with the final DDR and L3 frequencies being
an aggregate of both.
Co-developed-by: Shivnandan Kumar <quic_kshivnan@quicinc.com>
Signed-off-by: Shivnandan Kumar <quic_kshivnan@quicinc.com>
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415095343.32125-8-quic_rlaggysh@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add Epoch Subsystem (EPSS) L3 interconnect provider node on SA8775P
SoCs. L3 instances on this SoC are same as SM8250 and SC7280 SoCs.
These SoCs use EPSS_L3_PERF register instead of REG_L3_VOTE register for
programming the perf level. This is taken care in the data associated
with the target specific compatible. Since, the HW is same in the all
SoCs with EPSS support, using the same generic compatible for all.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Link: https://lore.kernel.org/r/20250415095343.32125-7-quic_rlaggysh@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add UFS host controller and PHY nodes for SM8750 QRD board.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Co-developed-by: Manish Pandey <quic_mapa@quicinc.com>
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250327-sm8750_ufs_master-v3-4-bad1f5398d0a@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add UFS host controller and PHY nodes for SM8750 MTP board.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Co-developed-by: Manish Pandey <quic_mapa@quicinc.com>
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250327-sm8750_ufs_master-v3-3-bad1f5398d0a@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add UFS host controller and PHY nodes for SM8750 SoC.
Co-developed-by: Manish Pandey <quic_mapa@quicinc.com>
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250327-sm8750_ufs_master-v3-2-bad1f5398d0a@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Follow the example of the recently added apq8016-sbc-usb-host.dtso and
convert apq8016-sbc-d3-camera-mezzanine.dts to a DT overlay that can be
applied on top of the apq8016-sbc.dtb. This makes it more clear that
this is not a special type of DB410c but just an addon board that can
be added on top.
Functionally there should not be any difference since
apq8016-sbc-d3-camera-mezzanine.dtb is still generated as before
(but now by applying the overlay on top of apq8016-sbc.dtb).
Since dtc does not know that there are default #address/size-cells in
msm8916.dtsi, repeat those in the overlay to avoid dtc warnings because
it expects the wrong amount of address/size-cells.
It would be nice to have a generic overlay for the D3 camera mezzanine
(that can be applied to all 96Boards) but that's much more complicated
than providing a board-specific DT overlay as intermediate step.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250408-apq8016-sbc-camera-dtso-v1-1-cdf1cd41bda6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the WiFi/BT nodes for XPS and describe the regulators for the WCN7850
combo chip using the new power sequencing bindings. All voltages are
derived from chained fixed regulators controlled using a single GPIO.
Based on the commit d09ab685a8f5 ("arm64: dts: qcom: x1e80100-qcp: Add
WiFi/BT pwrseq").
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Tested-by: Laurentiu Tudor <laurentiu.tudor1@dell.com>
Link: https://lore.kernel.org/r/20250331204610.526672-2-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add QMP handle which is used to send QMP command to always on processor
to populate DDR stats. Add QMP handle for SM8450/SM8550/SM8650/SM8750.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250611-ddr_stats_-v5-3-24b16dd67c9c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
After a change enabling camera clock controller for all Qualcomm SM8250
boards the explicit control of the clock controller status can be removed
from the RB5 vision mezzanine dts overlay file.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250523092313.2625421-2-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable camera clock controller on all Qualcomm SM8250 derived boards
by default due to the established agreement of having all clock
controllers enabled.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250523092313.2625421-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The 8-core SKUs of the X1 family have a different sensor configuration.
Override it to expose what the sensors really measure.
Fixes: f08edb529916 ("arm64: dts: qcom: Add X1P42100 SoC and CRD")
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250520-topic-x1p4_tsens-v2-1-9687b789a4fb@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
<0 0x17a30000 0 0x10000> is unused for apps_rsc.
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250525152317.1378105-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device nodes for most of the sound support - WSA884x smart speakers,
WCD9395 audio codec (headset) and sound card - which allows sound
playback via speakers and recording via AMIC microphones. Changes bring
necessary foundation for headset playback/recording via USB, but that
part is not yet ready.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250526-sm8750-audio-part-2-v3-3-74429c686bb1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device nodes for most of the sound support - WSA883x smart speakers,
WCD9395 audio codec (headset) and sound card - which allows sound
playback via speakers and recording via DMIC microphones. Changes bring
necessary foundation for headset playback/recording via USB, but that
part is not yet ready.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250526-sm8750-audio-part-2-v3-2-74429c686bb1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add Soundwire controllers on SM8750, fully compatible with earlier
SM8650 generation.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250526-sm8750-audio-part-2-v3-1-74429c686bb1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
amend the order of pmk8550_* nodes afte pmc8380_*
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250610-hp-x14-v3-3-35d5b50efae0@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
At least from Linux, these buses are not in use. Remove them from the dt.
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250610-hp-x14-v3-2-35d5b50efae0@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The usb_1_1 port doesn't have the PS8830 repeater, but apparently some
MUX for DP altmode control. After a suggestion from sgerhold on
'#aarch64-laptops' I added gpio-sbu-mux nodes from the x1e80100-QCP
tree, and this appears to work well. It is still guesswork, but
working guesswork.
Added and rewired for usb_1_1
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Link: https://lore.kernel.org/r/20250610-hp-x14-v3-1-35d5b50efae0@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device node for camera clock controller on Qualcomm
SC8180X platform.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20250512-sc8180x-camcc-support-v4-4-8fb1d3265f52@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
into arm64-for-6.17
Merge the topic branch containing SC8180X GCC and camera clock
controller additions to gain access to the constants defined in the
binding.
|
|
Add device tree bindings for the camera clock controller on
Qualcomm SC8180X platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20250512-sc8180x-camcc-support-v4-2-8fb1d3265f52@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The multi-media AHB clocks are needed to create HW dependency in
the multimedia CC dt blocks and avoid any issues. They were not
defined in the initial bindings. Add all the missing clock bindings
for gcc-sc8180x.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250512-sc8180x-camcc-support-v4-1-8fb1d3265f52@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a node for the videocc found on the SM6350 SoC.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250324-sm6350-videocc-v2-4-cc22386433f4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable video nodes on the qcs8300-ride board.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Link: https://lore.kernel.org/r/20250501-qcs8300_iris-v7-5-b229d5347990@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the IRIS video-codec node on QCS8300 platform to support video
functionality.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250501-qcs8300_iris-v7-4-b229d5347990@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add anx7625 DSI to DP bridge device nodes.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250604071851.1438612-3-quic_amakhija@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device tree nodes for the DSI0 and DSI1 controllers
with their corresponding PHYs found on Qualcomm SA8775P SoC.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <lumag@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250604071851.1438612-2-quic_amakhija@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250227-pcie-global-irq-v1-23-2b70a7819d1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250227-pcie-global-irq-v1-22-2b70a7819d1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250227-pcie-global-irq-v1-21-2b70a7819d1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
IPQ6018 has 8 MSI SPI interrupts and one 'global' interrupt.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250227-pcie-global-irq-v1-19-2b70a7819d1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
IPQ8074 has 8 MSI SPI interrupts and one 'global' interrupt.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250227-pcie-global-irq-v1-17-2b70a7819d1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
MSM8998 has 8 MSI SPI interrupts and one 'global' interrupt.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250227-pcie-global-irq-v1-15-2b70a7819d1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
MSM8996 has 8 MSI SPI interrupts per controller instance.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250227-pcie-global-irq-v1-13-2b70a7819d1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SDM845 has 8 MSI SPI interrupts and one 'global' interrupt per controller.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250227-pcie-global-irq-v1-12-2b70a7819d1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250227-pcie-global-irq-v1-10-2b70a7819d1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250227-pcie-global-irq-v1-8-2b70a7819d1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250227-pcie-global-irq-v1-6-2b70a7819d1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250227-pcie-global-irq-v1-4-2b70a7819d1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
'global' interrupt is used to receive PCIe controller and link specific
events.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250227-pcie-global-irq-v1-2-2b70a7819d1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable SLPI, Sensors DSP on the Lenovo Yoga C630. The DSP boots the
firmware and provides QMI services, however it is of limited
functionality due to the missing fastrpc_shell_1 binary.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250608-c630-slpi-v1-1-72210249e37e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The fingerprint sensor, hidden in the power button, is connected to one
of the USB multiport ports; while the other port is unused.
Describe the USB controller, the four phys and the repeater involved to
make the fingerprint sensor operational.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250605-xps13-fingerprint-v2-1-eebf84c172f2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Remove stray lines
Signed-off-by: Eugen Hristev <eugen.hristev@linaro.org>
Link: https://lore.kernel.org/r/20250605151040.56942-1-eugen.hristev@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Add initial DMR support, which required smarter RAPL probe
- Fix AMD MSR RAPL energy reporting
- Add RAPL power limit configuration output
- Minor fixes
* tag 'turbostat-2025.06.08' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2025.06.08
tools/power turbostat: Add initial support for BartlettLake
tools/power turbostat: Add initial support for DMR
tools/power turbostat: Dump RAPL sysfs info
tools/power turbostat: Avoid probing the same perf counters
tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared
tools/power turbostat: Clean up add perf/msr counter logic
tools/power turbostat: Introduce add_msr_counter()
tools/power turbostat: Remove add_msr_perf_counter_()
tools/power turbostat: Remove add_cstate_perf_counter_()
tools/power turbostat: Remove add_rapl_perf_counter_()
tools/power turbostat: Quit early for unsupported RAPL counters
tools/power turbostat: Always check rapl_joules flag
tools/power turbostat: Fix AMD package-energy reporting
tools/power turbostat: Fix RAPL_GFX_ALL typo
tools/power turbostat: Add Android support for MSR device handling
tools/power turbostat.8: pm_domain wording fix
tools/power turbostat.8: fix typo: idle_pct should be pct_idle
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of x86 fixes:
- Cure IO bitmap inconsistencies
A failed fork cleans up all resources of the newly created thread
via exit_thread(). exit_thread() invokes io_bitmap_exit() which
does the IO bitmap cleanups, which unfortunately assume that the
cleanup is related to the current task, which is obviously bogus.
Make it work correctly
- A lockdep fix in the resctrl code removed the clearing of the
command buffer in two places, which keeps stale error messages
around. Bring them back.
- Remove unused trace events"
* tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex
x86/iopl: Cure TIF_IO_BITMAP inconsistencies
x86/fpu: Remove unused trace events
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"Add the missing seq_file forward declaration in the timer namespace
header"
* tag 'timers-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timens: Add struct seq_file forward declaration
|
|
Add initial DMR support, which required smarter RAPL probe
Fix AMD MSR RAPL energy reporting
Add RAPL power limit configuration output
Minor fixes
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add initial support for BartlettLake.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
