| Age | Commit message (Collapse) | Author |
|---|
|
Add a missing EHB (Execution Hazard Barrier) in mtc0 -> mfc0 sequence.
Without this execution hazard barrier it's possible for the value read
back from the KScratch register to be the value from before the mtc0.
Reproducible on P5600 & P6600.
The hazard is documented in the MIPS Architecture Reference Manual Vol.
III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev
6.03 table 8.1 which includes:
Producer | Consumer | Hazard
----------|----------|----------------------------
mtc0 | mfc0 | any coprocessor 0 register
Signed-off-by: Dmitry Korotin <dkorotin@wavecomp.com>
[paul.burton@mips.com:
- Commit message tweaks.
- Add Fixes tags.
- Mark for stable back to v3.15 where P5600 support was introduced.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 3d8bfdd03072 ("MIPS: Use C0_KScratch (if present) to hold PGD pointer.")
Fixes: 829dcc0a956a ("MIPS: Add MIPS P5600 probe support")
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v3.15+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd bugfix from Lee Jones.
Fix stmfx type confusion between regmap_read() (which takes an "u32")
and the bitmap operations (which take an "unsigned long" array).
* tag 'mfd-fixes-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: stmfx: Fix an endian bug in stmfx_irq_handler()
mfd: stmfx: Uninitialized variable in stmfx_irq_handler()
|
|
The Energy Aware Scheduler (EAS) estimates the energy impact of waking
up a task on a given CPU. This estimation is based on:
a) an (active) power consumption defined for each CPU frequency
b) an estimation of which frequency will be used on each CPU
c) an estimation of the busy time (utilization) of each CPU
Utilization clamping can affect both b) and c).
A CPU is expected to run:
- on an higher than required frequency, but for a shorter time, in case
its estimated utilization will be smaller than the minimum utilization
enforced by uclamp
- on a smaller than required frequency, but for a longer time, in case
its estimated utilization is bigger than the maximum utilization
enforced by uclamp
While compute_energy() already accounts clamping effects on busy time,
the clamping effects on frequency selection are currently ignored.
Fix it by considering how CPU clamp values will be affected by a
task waking up and being RUNNABLE on that CPU.
Do that by refactoring schedutil_freq_util() to take an additional
task_struct* which allows EAS to evaluate the impact on clamp values of
a task being eventually queued in a CPU. Clamp values are applied to the
RT+CFS utilization only when a FREQUENCY_UTIL is required by
compute_energy().
Do note that switching from ENERGY_UTIL to FREQUENCY_UTIL in the
computation of the cpu_util signal implies that we are more likely to
estimate the highest OPP when a RT task is running in another CPU of
the same performance domain. This can have an impact on energy
estimation but:
- it's not easy to say which approach is better, since it depends on
the use case
- the original approach could still be obtained by setting a smaller
task-specific util_min whenever required
Since we are at that:
- rename schedutil_freq_util() into schedutil_cpu_util(),
since it's not only used for frequency selection.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-12-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
So far uclamp_util() allows to clamp a specified utilization considering
the clamp values requested by RUNNABLE tasks in a CPU. For the Energy
Aware Scheduler (EAS) it is interesting to test how clamp values will
change when a task is becoming RUNNABLE on a given CPU.
For example, EAS is interested in comparing the energy impact of
different scheduling decisions and the clamp values can play a role on
that.
Add uclamp_util_with() which allows to clamp a given utilization by
considering the possible impact on CPU clamp values of a specified task.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-11-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Each time a frequency update is required via schedutil, a frequency is
selected to (possibly) satisfy the utilization reported by each
scheduling class and irqs. However, when utilization clamping is in use,
the frequency selection should consider userspace utilization clamping
hints. This will allow, for example, to:
- boost tasks which are directly affecting the user experience
by running them at least at a minimum "requested" frequency
- cap low priority tasks not directly affecting the user experience
by running them only up to a maximum "allowed" frequency
These constraints are meant to support a per-task based tuning of the
frequency selection thus supporting a fine grained definition of
performance boosting vs energy saving strategies in kernel space.
Add support to clamp the utilization of RUNNABLE FAIR and RT tasks
within the boundaries defined by their aggregated utilization clamp
constraints.
Do that by considering the max(min_util, max_util) to give boosted tasks
the performance they need even when they happen to be co-scheduled with
other capped tasks.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-10-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
By default FAIR tasks start without clamps, i.e. neither boosted nor
capped, and they run at the best frequency matching their utilization
demand. This default behavior does not fit RT tasks which instead are
expected to run at the maximum available frequency, if not otherwise
required by explicitly capping them.
Enforce the correct behavior for RT tasks by setting util_min to max
whenever:
1. the task is switched to the RT class and it does not already have a
user-defined clamp value assigned.
2. an RT task is forked from a parent with RESET_ON_FORK set.
NOTE: utilization clamp values are cross scheduling class attributes and
thus they are never changed/reset once a value has been explicitly
defined from user-space.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-9-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
A forked tasks gets the same clamp values of its parent however, when
the RESET_ON_FORK flag is set on parent, e.g. via:
sys_sched_setattr()
sched_setattr()
__sched_setscheduler(attr::SCHED_FLAG_RESET_ON_FORK)
the new forked task is expected to start with all attributes reset to
default values.
Do that for utilization clamp values too by checking the reset request
from the existing uclamp_fork() call which already provides the required
initialization for other uclamp related bits.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-8-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The SCHED_DEADLINE scheduling class provides an advanced and formal
model to define tasks requirements that can translate into proper
decisions for both task placements and frequencies selections. Other
classes have a more simplified model based on the POSIX concept of
priorities.
Such a simple priority based model however does not allow to exploit
most advanced features of the Linux scheduler like, for example, driving
frequencies selection via the schedutil cpufreq governor. However, also
for non SCHED_DEADLINE tasks, it's still interesting to define tasks
properties to support scheduler decisions.
Utilization clamping exposes to user-space a new set of per-task
attributes the scheduler can use as hints about the expected/required
utilization for a task. This allows to implement a "proactive" per-task
frequency control policy, a more advanced policy than the current one
based just on "passive" measured task utilization. For example, it's
possible to boost interactive tasks (e.g. to get better performance) or
cap background tasks (e.g. to be more energy/thermal efficient).
Introduce a new API to set utilization clamping values for a specified
task by extending sched_setattr(), a syscall which already allows to
define task specific properties for different scheduling classes. A new
pair of attributes allows to specify a minimum and maximum utilization
the scheduler can consider for a task.
Do that by validating the required clamp values before and then applying
the required changes using _the_ same pattern already in use for
__setscheduler(). This ensures that the task is re-enqueued with the new
clamp values.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-7-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The sched_setattr() syscall mandates that a policy is always specified.
This requires to always know which policy a task will have when
attributes are configured and this makes it impossible to add more
generic task attributes valid across different scheduling policies.
Reading the policy before setting generic tasks attributes is racy since
we cannot be sure it is not changed concurrently.
Introduce the required support to change generic task attributes without
affecting the current task policy. This is done by adding an attribute flag
(SCHED_FLAG_KEEP_POLICY) to enforce the usage of the current policy.
Add support for the SETPARAM_POLICY policy, which is already used by the
sched_setparam() POSIX syscall, to the sched_setattr() non-POSIX
syscall.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-6-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Tasks without a user-defined clamp value are considered not clamped
and by default their utilization can have any value in the
[0..SCHED_CAPACITY_SCALE] range.
Tasks with a user-defined clamp value are allowed to request any value
in that range, and the required clamp is unconditionally enforced.
However, a "System Management Software" could be interested in limiting
the range of clamp values allowed for all tasks.
Add a privileged interface to define a system default configuration via:
/proc/sys/kernel/sched_uclamp_util_{min,max}
which works as an unconditional clamp range restriction for all tasks.
With the default configuration, the full SCHED_CAPACITY_SCALE range of
values is allowed for each clamp index. Otherwise, the task-specific
clamp is capped by the corresponding system default value.
Do that by tracking, for each task, the "effective" clamp value and
bucket the task has been refcounted in at enqueue time. This
allows to lazy aggregate "requested" and "system default" values at
enqueue time and simplifies refcounting updates at dequeue time.
The cached bucket ids are used to avoid (relatively) more expensive
integer divisions every time a task is enqueued.
An active flag is used to report when the "effective" value is valid and
thus the task is actually refcounted in the corresponding rq's bucket.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-5-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When a task sleeps it removes its max utilization clamp from its CPU.
However, the blocked utilization on that CPU can be higher than the max
clamp value enforced while the task was running. This allows undesired
CPU frequency increases while a CPU is idle, for example, when another
CPU on the same frequency domain triggers a frequency update, since
schedutil can now see the full not clamped blocked utilization of the
idle CPU.
Fix this by using:
uclamp_rq_dec_id(p, rq, UCLAMP_MAX)
uclamp_rq_max_value(rq, UCLAMP_MAX, clamp_value)
to detect when a CPU has no more RUNNABLE clamped tasks and to flag this
condition.
Don't track any minimum utilization clamps since an idle CPU never
requires a minimum frequency. The decay of the blocked utilization is
good enough to reduce the CPU frequency.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-4-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Because of bucketization, different task-specific clamp values are
tracked in the same bucket. For example, with 20% bucket size and
assuming to have:
Task1: util_min=25%
Task2: util_min=35%
both tasks will be refcounted in the [20..39]% bucket and always boosted
only up to 20% thus implementing a simple floor aggregation normally
used in histograms.
In systems with only few and well-defined clamp values, it would be
useful to track the exact clamp value required by a task whenever
possible. For example, if a system requires only 23% and 47% boost
values then it's possible to track the exact boost required by each
task using only 3 buckets of ~33% size each.
Introduce a mechanism to max aggregate the requested clamp values of
RUNNABLE tasks in the same bucket. Keep it simple by resetting the
bucket value to its base value only when a bucket becomes inactive.
Allow a limited and controlled overboosting margin for tasks recounted
in the same bucket.
In systems where the boost values are not known in advance, it is still
possible to control the maximum acceptable overboosting margin by tuning
the number of clamp groups. For example, 20 groups ensure a 5% maximum
overboost.
Remove the rq bucket initialization code since a correct bucket value
is now computed when a task is refcounted into a CPU's rq.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-3-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Utilization clamping allows to clamp the CPU's utilization within a
[util_min, util_max] range, depending on the set of RUNNABLE tasks on
that CPU. Each task references two "clamp buckets" defining its minimum
and maximum (util_{min,max}) utilization "clamp values". A CPU's clamp
bucket is active if there is at least one RUNNABLE tasks enqueued on
that CPU and refcounting that bucket.
When a task is {en,de}queued {on,from} a rq, the set of active clamp
buckets on that CPU can change. If the set of active clamp buckets
changes for a CPU a new "aggregated" clamp value is computed for that
CPU. This is because each clamp bucket enforces a different utilization
clamp value.
Clamp values are always MAX aggregated for both util_min and util_max.
This ensures that no task can affect the performance of other
co-scheduled tasks which are more boosted (i.e. with higher util_min
clamp) or less capped (i.e. with higher util_max clamp).
A task has:
task_struct::uclamp[clamp_id]::bucket_id
to track the "bucket index" of the CPU's clamp bucket it refcounts while
enqueued, for each clamp index (clamp_id).
A runqueue has:
rq::uclamp[clamp_id]::bucket[bucket_id].tasks
to track how many RUNNABLE tasks on that CPU refcount each
clamp bucket (bucket_id) of a clamp index (clamp_id).
It also has a:
rq::uclamp[clamp_id]::bucket[bucket_id].value
to track the clamp value of each clamp bucket (bucket_id) of a clamp
index (clamp_id).
The rq::uclamp::bucket[clamp_id][] array is scanned every time it's
needed to find a new MAX aggregated clamp value for a clamp_id. This
operation is required only when it's dequeued the last task of a clamp
bucket tracking the current MAX aggregated clamp value. In this case,
the CPU is either entering IDLE or going to schedule a less boosted or
more clamped task.
The expected number of different clamp values configured at build time
is small enough to fit the full unordered array into a single cache
line, for configurations of up to 7 buckets.
Add to struct rq the basic data structures required to refcount the
number of RUNNABLE tasks for each clamp bucket. Add also the max
aggregation required to update the rq's clamp value at each
enqueue/dequeue event.
Use a simple linear mapping of clamp values into clamp buckets.
Pre-compute and cache bucket_id to avoid integer divisions at
enqueue/dequeue time.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-2-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The term 'weighted' is not needed since there is no 'unweighted' load.
Instead use the term 'runnable' to distinguish 'runnable' load
(avg.runnable_load_avg) used in load balance from load (avg.load_avg)
which is the sum of 'runnable' and 'blocked' load.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/57f27a7f-2775-d832-e965-0f4d51bb1954@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
So that external modules can hook into them and extract the info they
need. Since these new tracepoints have no events associated with them
exporting these tracepoints make them useful for external modules to
perform testing and debugging. There's no other way otherwise to access
them.
BPF doesn't have infrastructure to access these bare tracepoints either.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-7-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The new tracepoint allows us to track the changes in overutilized
status.
Overutilized status is associated with EAS. It indicates that the system
is in high performance state. EAS is disabled when the system is in this
state since there's not much energy savings while high performance tasks
are pushing the system to the limit and it's better to default to the
spreading behavior of the scheduler.
This tracepoint helps understanding and debugging the conditions under
which this happens.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-6-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The new tracepoint allows tracking PELT signals at sched_entity level.
Which is supported in CFS tasks and taskgroups only.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-5-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The new tracepoints allow tracking PELT signals at rq level for all
scheduling classes + irq.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-4-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The new functions allow modules to access internal data structures of
unexported struct cfs_rq and struct rq to extract important information
from the tracepoints to be introduced in later patches.
While at it fix alphabetical order of struct declarations in sched.h
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-3-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Remove the #ifdef CONFIG_SCHED_DEBUG.
Some of the tracepoints to be introduced in later patches need to access
this function. Hence make it always available since the tracepoints are
not protected by CONFIG_SCHED_DEBUG.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-2-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Statements in the loop's body and before it are identical.
Use do-while to not repeat it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/43ffea6ee2152b90dedf962eac851609e4197218.1560256112.git.asml.silence@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The 'struct sched_domain *sd' parameter to arch_scale_cpu_capacity() is
unused since commit:
765d0af19f5f ("sched/topology: Remove the ::smt_gain field from 'struct sched_domain'")
Remove it.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: gregkh@linuxfoundation.org
Cc: linux@armlinux.org.uk
Cc: quentin.perret@arm.com
Cc: rafael@kernel.org
Link: https://lkml.kernel.org/r/1560783617-5827-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Use the macro defined in kernel ABI header to replace the local name.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/1559081314-9714-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We don't need pmu->pebs_no_xmm_regs anymore, the capabilities
PERF_PMU_CAP_EXTENDED_REGS can be used to check if XMM registers
collection is supported.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/1559081314-9714-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Use generic macro PERF_REG_EXTENDED_MASK to replace PEBS_XMM_REGS to
avoid duplication.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/1559081314-9714-3-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The perf fuzzer triggers a warning which map to:
if (WARN_ON_ONCE(idx >= ARRAY_SIZE(pt_regs_offset)))
return 0;
The bits between XMM registers and generic registers are reserved.
But perf_reg_validate() doesn't check these bits.
Add PERF_REG_X86_RESERVED for reserved bits on X86.
Check the reserved bits in perf_reg_validate().
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 878068ea270e ("perf/x86: Support outputting XMM registers")
Link: https://lkml.kernel.org/r/1559081314-9714-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The perf fuzzer caused Skylake machine to crash:
[ 9680.085831] Call Trace:
[ 9680.088301] <IRQ>
[ 9680.090363] perf_output_sample_regs+0x43/0xa0
[ 9680.094928] perf_output_sample+0x3aa/0x7a0
[ 9680.099181] perf_event_output_forward+0x53/0x80
[ 9680.103917] __perf_event_overflow+0x52/0xf0
[ 9680.108266] ? perf_trace_run_bpf_submit+0xc0/0xc0
[ 9680.113108] perf_swevent_hrtimer+0xe2/0x150
[ 9680.117475] ? check_preempt_wakeup+0x181/0x230
[ 9680.122091] ? check_preempt_curr+0x62/0x90
[ 9680.126361] ? ttwu_do_wakeup+0x19/0x140
[ 9680.130355] ? try_to_wake_up+0x54/0x460
[ 9680.134366] ? reweight_entity+0x15b/0x1a0
[ 9680.138559] ? __queue_work+0x103/0x3f0
[ 9680.142472] ? update_dl_rq_load_avg+0x1cd/0x270
[ 9680.147194] ? timerqueue_del+0x1e/0x40
[ 9680.151092] ? __remove_hrtimer+0x35/0x70
[ 9680.155191] __hrtimer_run_queues+0x100/0x280
[ 9680.159658] hrtimer_interrupt+0x100/0x220
[ 9680.163835] smp_apic_timer_interrupt+0x6a/0x140
[ 9680.168555] apic_timer_interrupt+0xf/0x20
[ 9680.172756] </IRQ>
The XMM registers can only be collected by PEBS hardware events on the
platforms with PEBS baseline support, e.g. Icelake, not software/probe
events.
Add capabilities flag PERF_PMU_CAP_EXTENDED_REGS to indicate the PMU
which support extended registers. For X86, the extended registers are
XMM registers.
Add has_extended_regs() to check if extended registers are applied.
The generic code define the mask of extended registers as 0 if arch
headers haven't overridden it.
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 878068ea270e ("perf/x86: Support outputting XMM registers")
Link: https://lkml.kernel.org/r/1559081314-9714-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
perf_event_open() limits the sample_period to 63 bits. See:
0819b2e30ccb ("perf: Limit perf_event_attr::sample_period to 63 bits")
Make ioctl() consistent with it.
Also on PowerPC, negative sample_period could cause a recursive
PMIs leading to a hang (reported when running perf-fuzzer).
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: maddy@linux.vnet.ibm.com
Cc: mpe@ellerman.id.au
Fixes: 0819b2e30ccb ("perf: Limit perf_event_attr::sample_period to 63 bits")
Link: https://lkml.kernel.org/r/20190604042953.914-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The BPF code now takes care of mapping the code pages executable
after mapping them read-only, to ensure that no RWX mapped regions
are needed, even transiently. This means we can drop the executable
permissions from the mapping at allocation time.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In order to avoid transient inconsistencies where freed code pages
are remapped writable while stale TLB entries still exist on other
cores, mark the kprobes text pages with the VM_FLUSH_RESET_PERMS
attribute. This instructs the core vmalloc code not to defer the
TLB flush when this region is unmapped and returned to the page
allocator.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Wire up the special helper functions to manipulate aliases of vmalloc
regions in the linear map.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Now that the core code manages the executable permissions of code
regions of modules explicitly, it is no longer necessary to create
the module vmalloc regions with RWX permissions, and we can create
them with RW- permissions instead, which is preferred from a
security perspective.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Make ARM64_MODULE_PLTS a selectable Kconfig symbol, since some people
might have very big modules spilling out of the dedicated module area
into vmalloc. Help text is copied from the ARM 32-bit counterpart and
modified to a mention of KASLR and specific ARM errata workaround(s).
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Some Qualcomm Snapdragon based laptops built to run Microsoft Windows
are clearly ACPI 5.1 based, given that that is the first ACPI revision
that supports ARM, and introduced the FADT 'arm_boot_flags' field,
which has a non-zero field on those systems.
So in these cases, infer from the ARM boot flags that the FADT must be
5.1 or later, and treat it as 5.1.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The syzbot reported
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xca/0x13e lib/dump_stack.c:113
print_address_description+0x67/0x231 mm/kasan/report.c:188
__kasan_report.cold+0x1a/0x32 mm/kasan/report.c:317
kasan_report+0xe/0x20 mm/kasan/common.c:614
qmi_wwan_probe+0x342/0x360 drivers/net/usb/qmi_wwan.c:1417
usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
really_probe+0x281/0x660 drivers/base/dd.c:509
driver_probe_device+0x104/0x210 drivers/base/dd.c:670
__device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777
bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
Caused by too many confusing indirections and casts.
id->driver_info is a pointer stored in a long. We want the
pointer here, not the address of it.
Thanks-to: Hillf Danton <hdanton@sina.com>
Reported-by: syzbot+b68605d7fadd21510de1@syzkaller.appspotmail.com
Cc: Kristian Evensen <kristian.evensen@gmail.com>
Fixes: e4bf63482c30 ("qmi_wwan: Add quirk for Quectel dynamic config")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to fix an uninit-value issue, reported by syzbot:
BUG: KMSAN: uninit-value in memchr+0xce/0x110 lib/string.c:981
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x191/0x1f0 lib/dump_stack.c:113
kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622
__msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310
memchr+0xce/0x110 lib/string.c:981
string_is_valid net/tipc/netlink_compat.c:176 [inline]
tipc_nl_compat_bearer_disable+0x2a1/0x480 net/tipc/netlink_compat.c:449
__tipc_nl_compat_doit net/tipc/netlink_compat.c:327 [inline]
tipc_nl_compat_doit+0x3ac/0xb00 net/tipc/netlink_compat.c:360
tipc_nl_compat_handle net/tipc/netlink_compat.c:1178 [inline]
tipc_nl_compat_recv+0x1b1b/0x27b0 net/tipc/netlink_compat.c:1281
TLV_GET_DATA_LEN() may return a negtive int value, which will be
used as size_t (becoming a big unsigned long) passed into memchr,
cause this issue.
Similar to what it does in tipc_nl_compat_bearer_enable(), this
fix is to return -EINVAL when TLV_GET_DATA_LEN() is negtive in
tipc_nl_compat_bearer_disable(), as well as in
tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats().
v1->v2:
- add the missing Fixes tags per Eric's request.
Fixes: 0762216c0ad2 ("tipc: fix uninit-value in tipc_nl_compat_bearer_enable")
Fixes: 8b66fee7f8ee ("tipc: fix uninit-value in tipc_nl_compat_link_reset_stats")
Reported-by: syzbot+30eaa8bf392f7fafffaf@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver supported turning off regulators in suspend only for S2MPS14
device. However this makes also sense for S2MPS11 and can reduce the
power consumption during suspend to RAM.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Store the regulator ID instead of calling rdev_get_id() every time.
This makes code slightly easier to read as shorter 'rdev_id' variable is
used instead of full call. This can also speed things up by reducing
number of calls, although effect was not measured.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Low-voltage switches (lvs) don't have set_points since the voltage ranges
of the output are really controlled by the inputs. This is a problem for
the newly added linear range support in the probe(), as that will cause
a null pointer dereference error on older platforms like msm8974 which
happen to need to control some of the implemented lvs.
Fix this by adding the appropriate null check.
Fixes: 86f4ff7a0c0c ("regulator: qcom_spmi: enable linear range info")
Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
Herbert Xu recently reported a problem concerning RCU and compiler
barriers. In the course of discussing the problem, he put forth a
litmus test which illustrated a serious defect in the Linux Kernel
Memory Model's data-race-detection code [1].
The defect was that the LKMM assumed visibility and executes-before
ordering of plain accesses had to be mediated by marked accesses. In
Herbert's litmus test this wasn't so, and the LKMM claimed the litmus
test was allowed and contained a data race although neither is true.
In fact, plain accesses can be ordered by fences even in the absence
of marked accesses. In most cases this doesn't matter, because most
fences only order accesses within a single thread. But the rcu-fence
relation is different; it can order (and induce visibility between)
accesses in different threads -- events which otherwise might be
concurrent. This makes it relevant to data-race detection.
This patch makes two changes to the memory model to incorporate the
new insight:
If a store is separated by a fence from another access,
the store is necessarily visible to the other access (as
reflected in the ww-vis and wr-vis relations). Similarly,
if a load is separated by a fence from another access then
the load necessarily executes before the other access (as
reflected in the rw-xbstar relation).
If a store is separated by a strong fence from a marked access
then it is necessarily visible to any access that executes
after the marked access (as reflected in the ww-vis and wr-vis
relations).
With these changes, the LKMM gives the desired result for Herbert's
litmus test and other related ones [2].
[1] https://lore.kernel.org/lkml/Pine.LNX.4.44L0.1906041026570.1731-100000@iolanthe.rowland.org/
[2] https://github.com/paulmckrcu/litmus/blob/master/manual/plain/C-S-rcunoderef-1.litmus
https://github.com/paulmckrcu/litmus/blob/master/manual/plain/C-S-rcunoderef-2.litmus
https://github.com/paulmckrcu/litmus/blob/master/manual/plain/C-S-rcunoderef-3.litmus
https://github.com/paulmckrcu/litmus/blob/master/manual/plain/C-S-rcunoderef-4.litmus
https://github.com/paulmckrcu/litmus/blob/master/manual/plain/strong-vis.litmus
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
|
|
This patch fixes the MAC address setup in the probe. The MAC address
retrieved using of_get_mac_address was checked for not containing an
error, but it may also be NULL which wasn't tested. Fix it by replacing
IS_ERR with IS_ERR_OR_NULL.
Fixes: 541ddc66d665 ("net: macb: support of_get_mac_address new ERR_PTR error")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reported by sparse.
Fixes: 7f8e89a8f2fd ("vfio-ccw: Factor out the ccw0-to-ccw1 transition")
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190624090721.16241-1-cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features
Refactoring of the vfio-ccw cp handling, simplifying the
code and avoiding unneeded allocating/copying.
* tag 'vfio-ccw-20190621' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw:
vfio-ccw: Remove copy_ccw_from_iova()
vfio-ccw: Factor out the ccw0-to-ccw1 transition
vfio-ccw: Copy CCW data outside length calculation
vfio-ccw: Skip second copy of guest cp to host
vfio-ccw: Move guest_cp storage into common struct
s390/cio: Combine direct and indirect CCW paths
vfio-ccw: Rearrange IDAL allocation in direct CCW
vfio-ccw: Remove pfn_array_table
vfio-ccw: Adjust the first IDAW outside of the nested loops
vfio-ccw: Rearrange pfn_array and pfn_array_table arrays
s390/cio: Use generalized CCW handler in cp_init()
s390/cio: Generalize the TIC handler
s390/cio: Refactor the routine that handles TIC CCWs
s390/cio: Squash cp_free() and cp_unpin_free()
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
syzbot found we can leak memory in packet_set_ring(), if user application
provides buggy parameters.
Fixes: 7f953ab2ba46 ("af_packet: TX_RING support for TPACKET_V3")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With commit 94850257cf0f ("tls: Fix tls_device handling of partial records")
a new path was introduced to cleanup partial records during sk_proto_close.
This path does not handle the SW KTLS tx_list cleanup.
This is unnecessary though since the free_resources calls for both
SW and offload paths will cleanup a partial record.
The visible effect is the following warning, but this bug also causes
a page double free.
WARNING: CPU: 7 PID: 4000 at net/core/stream.c:206 sk_stream_kill_queues+0x103/0x110
RIP: 0010:sk_stream_kill_queues+0x103/0x110
RSP: 0018:ffffb6df87e07bd0 EFLAGS: 00010206
RAX: 0000000000000000 RBX: ffff8c21db4971c0 RCX: 0000000000000007
RDX: ffffffffffffffa0 RSI: 000000000000001d RDI: ffff8c21db497270
RBP: ffff8c21db497270 R08: ffff8c29f4748600 R09: 000000010020001a
R10: ffffb6df87e07aa0 R11: ffffffff9a445600 R12: 0000000000000007
R13: 0000000000000000 R14: ffff8c21f03f2900 R15: ffff8c21f03b8df0
Call Trace:
inet_csk_destroy_sock+0x55/0x100
tcp_close+0x25d/0x400
? tcp_check_oom+0x120/0x120
tls_sk_proto_close+0x127/0x1c0
inet_release+0x3c/0x60
__sock_release+0x3d/0xb0
sock_close+0x11/0x20
__fput+0xd8/0x210
task_work_run+0x84/0xa0
do_exit+0x2dc/0xb90
? release_sock+0x43/0x90
do_group_exit+0x3a/0xa0
get_signal+0x295/0x720
do_signal+0x36/0x610
? SYSC_recvfrom+0x11d/0x130
exit_to_usermode_loop+0x69/0xb0
do_syscall_64+0x173/0x180
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7fe9b9abc10d
RSP: 002b:00007fe9b19a1d48 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 0000000000000006 RCX: 00007fe9b9abc10d
RDX: 0000000000000002 RSI: 0000000000000080 RDI: 00007fe948003430
RBP: 00007fe948003410 R08: 00007fe948003430 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00005603739d9080
R13: 00007fe9b9ab9f90 R14: 00007fe948003430 R15: 0000000000000000
Fixes: 94850257cf0f ("tls: Fix tls_device handling of partial records")
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's not okay to cast a "u32 *" to "unsigned long *" when you are
doing a for_each_set_bit() loop because that will break on big
endian systems.
Fixes: 386145601b82 ("mfd: stmfx: Uninitialized variable in stmfx_irq_handler()")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Initialize pidfd to an invalid descriptor, to fail gracefully on
those kernels that do not implement CLONE_PIDFD and leave pidfd
unchanged.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Christian Brauner <christian@brauner.io>
|
|
Give userspace a cheap and reliable way to tell whether CLONE_PIDFD is
supported by the kernel or not. The easiest way is to pass an invalid
file descriptor value in parent_tidptr, perform the syscall and verify
that parent_tidptr has been changed to a valid file descriptor value.
CLONE_PIDFD uses parent_tidptr to return pidfds. CLONE_PARENT_SETTID
will use parent_tidptr to return the tid of the parent. The two flags
cannot be used together. Old kernels that only support
CLONE_PARENT_SETTID will not verify the value pointed to by
parent_tidptr. This behavior is unchanged even with the introduction of
CLONE_PIDFD.
However, if CLONE_PIDFD is specified the kernel will currently check the
value pointed to by parent_tidptr before placing the pidfd in the memory
pointed to. EINVAL will be returned if the value in parent_tidptr is not
0.
If CLONE_PIDFD is supported and fd 0 is closed, then the returned pidfd
can and likely will be 0 and parent_tidptr will be unchanged. This means
userspace must either check CLONE_PIDFD support beforehand or check that
fd 0 is not closed when invoking CLONE_PIDFD.
The check for pidfd == 0 was introduced during the v5.2 merge window by
commit b3e583825266 ("clone: add CLONE_PIDFD") to ensure that
CLONE_PIDFD could be potentially extended by passing in flags through
the return argument.
However, that extension would look horrible, and with the upcoming
introduction of the clone3 syscall in v5.3 there is no need to extend
legacy clone syscall this way. (Even if it would need to be extended,
CLONE_DETACHED can be reused with CLONE_PIDFD.)
So remove the pidfd == 0 check. Userspace that needs to be portable to
kernels without CLONE_PIDFD support can then be advised to initialize
pidfd to -1 and check the pidfd value returned by CLONE_PIDFD.
Fixes: b3e583825266 ("clone: add CLONE_PIDFD")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Christian Brauner <christian@brauner.io>
|
