summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-10-27sh: Fix hugetlbfs dependencies for SH-3 && MMU configurations.Paul Mundt
The hugetlb dependencies presently depend on SUPERH && MMU while the hugetlb page size definitions depend on CPU_SH4 or CPU_SH5. This unfortunately allows SH-3 + MMU configurations to enable hugetlbfs without a corresponding HPAGE_SHIFT definition, resulting in the build blowing up. As SH-3 doesn't support variable page sizes, we tighten up the dependenies a bit to prevent hugetlbfs from being enabled. These days we also have a shiny new SYS_SUPPORTS_HUGETLBFS, so switch to using that rather than adding to the list of corner cases in fs/Kconfig. Reported-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27sh: Document uImage.bin target in archhelp.Paul Mundt
This was missing from the previous patch. Reported-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26Input: add driver for Dynapro serial touchscreenTias Guns
This is a driver for Dynapro serial touchscreen, which used to be supported in Xorg. The driver needs updated inputattach utility to initialize serial port and create proper serio device before the driver will be bound to it. Signed-off-by: Tias Guns <tias@ulyssis.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-10-26ARM: S3C64XX: Set rate of crystal muxMark Brown
The current code assumes that the external clock mux will be set to the crystal. Set this up explicitly within the clock API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-26ARM: S3C64XX: Fix S3C64XX_CLKDIV0_ARM_MASK valueKukjin Kim
Fix the values of S3C6400_CLKDIV0_ARM_MASK and S3C6410_CLKDIV0_ARM_MASK. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-26x86-64: Fix register leak in 32-bit syscall audtingJan Beulich
Restoring %ebp after the call to audit_syscall_exit() is not only unnecessary (because the register didn't get clobbered), but in the sysenter case wasn't even doing the right thing: It loaded %ebp from a location below the top of stack (RBP < ARGOFFSET), i.e. arbitrary kernel data got passed back to user mode in the register. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: <stable@kernel.org> LKML-Reference: <4AE5CC4D020000780001BD13@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26block: use after free bug in __blkdev_getNeil Brown
commit 0762b8bde9729f10f8e6249809660ff2ec3ad735 (from 14 months ago) introduced a use-after-free bug which has just recently started manifesting in my md testing. I tried git bisect to find out what caused the bug to start manifesting, and it could have been the recent change to blk_unregister_queue (48c0d4d4c04) but the results were inconclusive. This patch certainly fixes my symptoms and looks correct as the two calls are now in the same order as elsewhere in that function. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-26NFSv4: The link() operation should return any delegation on the fileTrond Myklebust
Otherwise, we have to wait for the server to recall it. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-10-26NFSv4: Fix two unbalanced put_rpccred() issues.Trond Myklebust
Commits 29fba38b (nfs41: lease renewal) and fc01cea9 (nfs41: sequence operation) introduce a couple of put_rpccred() calls on credentials for which there is no corresponding get_rpccred(). See http://bugzilla.kernel.org/show_bug.cgi?id=14249 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-10-26x86: crash_dump: Fix non-pae kdump kernel memory accessesJiri Slaby
Non-PAE 32-bit dump kernels may wrap an address around 4G and poke unwanted space. ptes there are 32-bit long, and since pfn << PAGE_SIZE may exceed this limit, high pfn bits are cropped and wrong address mapped by kmap_atomic_pfn in copy_oldmem_page. Don't allow this behavior in non-PAE kdump kernels by checking pfns passed into copy_oldmem_page. In the case of failure, userspace process gets EFAULT. [v2] - fix comments - move ifdefs inside the function Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Simon Horman <horms@verge.net.au> Cc: Paul Mundt <lethal@linux-sh.org> LKML-Reference: <1256551903-30567-1-git-send-email-jirislaby@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26x86: Side-step lguest problem by only building cmpxchg8b_emu for pre-PentiumRusty Russell
Commit 79e1dd05d1a22 "x86: Provide an alternative() based cmpxchg64()" broke lguest, even on systems which have cmpxchg8b support. The emulation code gets used until alternatives get run, but it contains native instructions, not their paravirt alternatives. The simplest fix is to turn this code off except for 386 and 486 builds. Reported-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: lguest@ozlabs.org Cc: Arjan van de Ven <arjan@infradead.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <200910261426.05769.rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26sh: add uImage.bin targetMagnus Damm
Add an uImage.bin target to allow uncompressed uImages. Useful for boards with busted u-boot decompression like the rsk7203 on my desk. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26sh: rsk7203 CONFIG_MTD=n fixMagnus Damm
Fix the rsk7203 board code to build with CONFIG_MTD=n. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26perf tools: Remove -Wcast-alignPaul Mundt
The present use of -Wcast-align causes the build to blow up on SH due to generating a "cast increases required alignment of target type" error on each invocation of list_for_each_entry(). It seems that this was previously reported and killed off in the ia64 support patch, but nothing seems to have happened with that. Presumably the same problem still remains there, too. Signed-off-by: Paul Mundt <lethal@linux-sh.org> LKML-Reference: <20091026054000.GA13517@linux-sh.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26sh: Check for return_to_handler when unwinding the stackMatt Fleming
When CONFIG_FUNCTION_GRAPH_TRACER is enabled the function graph tracer may patch return addresses on the stack with the address of return_to_handler(). This really confuses the DWARF unwinder because it will try find the caller of return_to_handler(), not the caller of the real return address. So teach the DWARF unwinder how to find the real return address whenever it encounters return_to_handler(). This patch does not cope very well when multiple return addresses on the stack have been patched. To make it work properly it would require state to track how many return_to_handler()'s have been seen so that we'd know where to look in current->curr_ret_stack[]. So for now, instead of trying to handle this, just moan if more than one return address on the stack has been patched. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26sh: Build fix: define more __movmem* symbolsLubomir Rintel
ERROR: "__movmemSI12" [net/unix/unix.ko] undefined! ERROR: "__movmemSI52" [net/ipv6/sit.ko] undefined! ERROR: "__movmemSI24" [net/ipv6/ipv6.ko] undefined! ERROR: "__movmemSI60" [net/ipv6/ipv6.ko] undefined! ERROR: "__movmemSI16" [net/ipv6/ipv6.ko] undefined! ERROR: "__movmemSI20" [net/ipv6/ipv6.ko] undefined! ERROR: "__movmemSI32" [net/ipv6/ipv6.ko] undefined! Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26sh: __irq_entry annotate do_IRQ().Paul Mundt
This adds an __irq_entry annotation for do_IRQ() so that the IRQ annotation in the function graph tracer works as advertized. We already have the IRQENTRY section wired up, so this is just a trivial addition to actually make use of it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-25ARM: Use GFP_DMA only for masks _less_ than 32-bitRussell King
We were using GFP_DMA for masks other than 0xffffffff, which is wrong when some masks are initialized to 0xffffffffffffffff. This caused such masks to obtain memory from the precious DMA pool. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-25ARM: integrator: allow Integrator to be built with highmemRussell King
This fixes Integrator builds with highmem enabled; we need to translate from 'struct page' to a DMA address, and this is not possible without __pfn_to_bus(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-25ASoC: Amstrad Delta: add info about the line discipline requirement to ↵Janusz Krzysztofik
Kconfig help text I thought it could be usefull to add some information on how to get the device fully supported by loading a line discipline on the modem line. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-25perf tools: Fix compatibility with libelf 0.8 and autodetectMarti Raudsepp
The Makefile now automatically defines LIBELF_NO_MMAP when libelf 0.8.x is detected. libelf 0.8 is still maintained and some distributions such as Arch Linux use it instead of elfutils. Signed-off-by: Marti Raudsepp <marti@juffo.org> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256400636.3007.16.camel@newn> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-25ARM: Fix signal restart issues with NX and OABI compatRussell King
The signal restarting code was placed on the user stack when OABI compatibility is enabled. Unfortunately, with an EABI NX executable, this results in an attempt to run code from the non-executable stack, which segfaults the application. Fix this by placing the code in the vectors page, along side the signal return code, and directing the application to that code. Reported-by: saeed bishara <saeed.bishara@gmail.com> Tested-by: saeed bishara <saeed.bishara@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-24pcmcia: do not load the pd6729 driver if io_base is NULLKomuro
The CL-PD6729 chip in some docking station is not initialized properly under Linux. In that case, do not load the pd6729 driver. [Dominik Brodowski <linux@dominikbrodowski.net>: spelling fixes, check for NULL not 0] Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-24bonding: Modify hash transmit policies to use the packet's source MAC addressJasper Spaans
Modify bonding hash transmit policies to use the psource MAC address of the packet instead of the MAC address configured for the bonding device. The old sitation conflicts with the documentation. Signed-off-by: Jasper Spaans <spaans@fox-it.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-24pktgen: Dont leak kernel memoryEric Dumazet
While playing with pktgen, I realized IP ID was not filled and a random value was taken, possibly leaking 2 bytes of kernel memory. We can use an increasing ID, this can help diagnostics anyway. Also clear packet payload, instead of leaking kernel memory. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-24DM9000: Fix revision ID for DM9000BBen Dooks
The DM9000B revision ID is 0x1A, not 0x1B as set in the curernt dm9000.h header. Fix bug reported by Paolo Zebelloni. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-24r8169: fix Ethernet Hangup for RTL8110SC rev dSimon Wunderlich
The 8110SC rev d chip on our board shows a regression which the 8110SB chip did not have. When inbound traffic is overflowing the receive descriptor queue, "holes" in the ring buffer may occur which lead to a hangup until the buffer is filled again. The packets are than completely processed, but the ring remains porous and no packets are processed until the next overflow. Setting the interface down and up can fix the problem temporary from userspace. For some reason we don't know, this behaviour is not occuring if the RxVlan bit for hardware VLAN untagging is set. There is another "Work around for AMD plateform" in the current code which checks the VLAN status word in receive descriptors, but does never come to effect when hardware VLAN support is enabled. We assume that this is a bug in the chip. The following patch fixes the problem. Without the patch we could reproduce the hang within minutes (given other devices also generating lots of interrupts), without we couldn't reproduce within a few days of long term testing. This version contains minor style adjustments and is sent with mutt which will hopefully not destroy the formatting again. Signed-off-by: Bernhard Schmidt <bernhard.schmidt@saxnet.de> Signed-off-by: Simon Wunderlich <simon.wunderlich@saxnet.de> Acked-by: Francois Romieu <romieu@zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-24block: silently error unsupported empty barriers tooMark McLoughlin
With 2.6.32-rc5 in a KVM guest using dm and virtio_blk, we see the following errors: end_request: I/O error, dev vda, sector 0 end_request: I/O error, dev vda, sector 0 The errors go away if dm stops submitting empty barriers, by reverting: commit 52b1fd5a27c625c78373e024bf570af3c9d44a79 Author: Mikulas Patocka <mpatocka@redhat.com> dm: send empty barriers to targets in dm_flush We should silently error all barriers, even empty barriers, on devices like virtio_blk which don't support them. See also: https://bugzilla.redhat.com/514901 Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Alasdair G Kergon <agk@redhat.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Neil Brown <neilb@suse.de> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-24hwmon: (it87) Fix VID reading on IT8718F/IT8720FJean Delvare
Comparing apples to bananas doesn't seem right. Consistently use the chips enum for chip type comparisons, to avoid such bugs in the future. The bug has been there since support for the IT8718F was added, so VID never worked for this chip nor for the similar IT8720F. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-10-24hwmon: (dme1737) No vid attributes for SCH311xJean Delvare
The SCH311x chips do not have VID inputs, so the cpu0_vid and vrm attributes shouldn't be created for them. This fixes lm-sensors ticket #2353: http://www.lm-sensors.org/ticket/2353 Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Udo van den Heuvel <udovdh@xs4all.nl> Cc: Juerg Haefliger <juergh@gmail.com>
2009-10-24hwmon: (fschmd) Fix check on unsigned in watchdog_write()Roel Kluin
If unsigned the watchdog_trigger() return value will not be checked correctly. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-10-24hwmon: (coretemp) Maintainer updateHuaxu Wan
Intel will help maintaining the coretemp driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-10-24tracing: Remove cpu arg from the rb_time_stamp() functionJiri Olsa
The cpu argument is not used inside the rb_time_stamp() function. Plus fix a typo. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091023233647.118547500@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-24tracing: Fix comment typo and documentation exampleJiri Olsa
Trivial patch to fix a documentation example and to fix a comment. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091023233646.871719877@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-24tracing: Fix trace_seq_printf() return valueJiri Olsa
trace_seq_printf() return value is a little ambiguous. It currently returns the length of the space available in the buffer. printf usually returns the amount written. This is not adequate here, because: trace_seq_printf(s, ""); is perfectly legal, and returning 0 would indicate that it failed. We can always see the amount written by looking at the before and after values of s->len. This is not quite the same use as printf. We only care if the string was successfully written to the buffer or not. Make trace_seq_printf() return 0 if the trace oversizes the buffer's free space, 1 otherwise. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091023233646.631787612@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-24tracing: Update *ppos instead of filp->f_posJiri Olsa
Instead of directly updating filp->f_pos we should update the *ppos argument. The filp->f_pos gets updated within the file_pos_write() function called from sys_write(). Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091023233646.399670810@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-23Pull ticket-spinaphore into release branchTony Luck
2009-10-23Pull ticket4byte into release branchTony Luck
2009-10-23NFSv4: Fix a bug when the server returns NFS4ERR_RESOURCETrond Myklebust
RFC 3530 states that when we recieve the error NFS4ERR_RESOURCE, we are not supposed to bump the sequence number on OPEN, LOCK, LOCKU, CLOSE, etc operations. The problem is that we map that error into EREMOTEIO in the XDR layer, and so the NFSv4 middle-layer routines like seqid_mutating_err(), and nfs_increment_seqid() don't recognise it. The fix is to defer the mapping until after the middle layers have processed the error. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-10-23nfs: Panic when commit failsTerry Loftin
Actually pass the NFS_FILE_SYNC option to the server to avoid a Panic in nfs_direct_write_complete() when a commit fails. At the end of an nfs write, if the nfs commit fails, all the writes will be rescheduled. They are supposed to be rescheduled as NFS_FILE_SYNC writes, but the rpc_task structure is not completely intialized and so the option is not passed. When the rescheduled writes complete, the return indicates that they are NFS_UNSTABLE and we try to do another commit. This leads to a Panic because the commit data structure pointer was set to null in the initial (failed) commit attempt. Signed-off-by: Terry Loftin <terry.loftin@hp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-10-23x86: Remove STACKPROTECTOR_ALLArjan van de Ven
STACKPROTECTOR_ALL has a really high overhead (runtime and stack footprint) and is not really worth it protection wise (the normal STACKPROTECTOR is in effect for all functions with buffers already), so lets just remove the option entirely. Reported-by: Dave Jones <davej@redhat.com> Reported-by: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Eric Sandeen <sandeen@redhat.com> LKML-Reference: <20091023073101.3dce4ebb@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-23perf events: Don't generate events for the idle task when exclude_idle is setSoeren Sandmann
Getting samples for the idle task is often not interesting, so don't generate them when exclude_idle is set for the event in question. Signed-off-by: Søren Sandmann Pedersen <sandmann@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <ye8pr8fmlq7.fsf@camel16.daimi.au.dk> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-23perf events: Fix swevent hrtimer sampling by keeping track of remaining time ↵Soeren Sandmann
when enabling/disabling swevent hrtimers Make the hrtimer based events work for sysprof. Whenever a swevent is scheduled out, the hrtimer is canceled. When it is scheduled back in, the timer is restarted. This happens every scheduler tick, which means the timer never expired because it was getting repeatedly restarted over and over with the same period. To fix that, save the remaining time when disabling; when reenabling, use that saved time as the period instead of the user-specified sampling period. Also, move the starting and stopping of the hrtimers to helper functions instead of duplicating the code. Signed-off-by: Søren Sandmann Pedersen <sandmann@redhat.com> LKML-Reference: <ye8vdi7mluz.fsf@camel16.daimi.au.dk> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-22ifb: should not use __dev_get_by_index() without locksEric Dumazet
At this point (ri_tasklet()), RTNL or dev_base_lock are not held, we must use dev_get_by_index() instead of __dev_get_by_index() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-22net: au1000_eth: add missing capability.hManuel Lauss
fixes the following build failure: CC drivers/net/au1000_eth.o /drivers/net/au1000_eth.c: In function 'au1000_set_settings': /drivers/net/au1000_eth.c:623: error: implicit declaration of function 'capable' /drivers/net/au1000_eth.c:623: error: 'CAP_NET_ADMIN' undeclared (first use in this function) /drivers/net/au1000_eth.c:623: error: (Each undeclared identifier is reported only once /drivers/net/au1000_eth.c:623: error: for each function it appears in. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-22myri10ge: improve port type reporting in ethtoolBrice Goglin
Improve the reporting of myri10ge port type in ethtool, and update for new boards. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-22net: use WARN() for the WARN_ON in commit b6b39e8f3fbbbArjan van de Ven
Commit b6b39e8f3fbbb (tcp: Try to catch MSG_PEEK bug) added a printk() to the WARN_ON() that's in tcp.c. This patch changes this combination to WARN(); the advantage of WARN() is that the printk message shows up inside the message, so that kerneloops.org will collect the message. In addition, this gets rid of an extra if() statement. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-22e1000e: reset the PHY on 82577/82578 when going to SxBruce Allan
The PHY on 82577/82578 parts needs a soft reset when transitioning to Sx state in order for the PHY write which disables gigabit speed to take effect. Gigabit speed must be disabled in order for the PHY writes to registers on page 800 (the wakeup control registers) to work as expected otherwise the system might not wake via WoL. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-22isdn: fix possible circular locking dependencyXiaotian Feng
There's a circular locking dependency: ---> isdn_net_get_locked_lp     --->lock &nd->queue_lock     --->lock &nd->queue->xmit_lock     .....................     ---->unlock &nd->queue_lock ---> isdn_net_writebuf_skb (called with &nd->queue->xmit_lock locked)     ---->isdn_net_inc_frame_cnt          ---->isdn_net_device_busy               ----> lock &nd->queue_lock This will trigger lockdep warnings:  =======================================================  [ INFO: possible circular locking dependency detected ]  2.6.32-rc4-testing #7  -------------------------------------------------------  ipppd/28379 is trying to acquire lock:  (&netdev->queue_lock){......}, at: [<e62ad0fd>] isdn_net_device_busy+0x2c/0x74 [isdn]  but task is already holding lock:  (&netdev->local->xmit_lock){+.....}, at: [<e62aefc2>] isdn_net_write_super+0x3f/0x6e [isdn]  which lock already depends on the new lock. ....... We don't need to lock nd->queue->xmit_lock to protect single isdn_net_lp_busy(). This can fix above lockdep warnings. Reported-and-tested-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Xiaotian Feng <xtfeng@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-22netxen: avoid undue board config checkDhananjay Phadke
Old code assumed board config version in the flash to be 1. When this will get changed by tools, driver just refuses to attach. This is unnecessary since driver does not have to parse board config structure directly (maintained by firmware). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 14:20:21 +0000