summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-10-11accel/ivpu: Add tracing for IPC/PM/JOBJakub Pawlak
Add multiple trace points in couple of key places to enable tracing with ftrace. Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-31-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Remove HWS_EXTRA_EVENTS from test modesJacek Lawrynowicz
IVPU_TEST_MODE_HWS_EXTRA_EVENTS was never used and can be safely removed Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-30-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Fix ivpu_jsm_dyndbg_control()Jacek Lawrynowicz
Use correct channel for dyndbg JSM message. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-29-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Increase MS info buffer sizeJacek Lawrynowicz
Increase MS info BO to 64KB to allow collecting more metrics. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-28-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Use whole user and shave ranges for preemption buffersKarol Wachowski
Do not restrict range for preemption buffers allocation just to the end of user and shave ranges, use them whole instead to avoid situation where end of range might be already allocated causing preemption buffers allocation to fail. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-27-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Do not fail on cmdq if failed to allocate preemption buffersKarol Wachowski
Allow to proceed with job command queue creation even if preemption buffers failed to be allocated, print warning that preemption on such command queue will be disabled. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-26-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Remove invalid warningsJacek Lawrynowicz
Warn in ivpu_file_priv_put() checks a pointer that is previously accessed. Warn in ivpu_ipc_fini() can be triggered even in valid cases where IPC is disabled upon closing the device. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-25-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Refactor failure diagnostics during bootKarol Wachowski
Move diagnostic functions to common error handling within ivpu_boot() function to ensure diagnostics are gathered even in cases where NPU fails after successful boot (DCT and HWS init failures). Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-24-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Prevent recovery invocation during probe and resumeKarol Wachowski
Refactor IPC send and receive functions to allow correct handling of operations that should not trigger a recovery process. Expose ivpu_send_receive_internal(), which is now utilized by the D0i3 entry, DCT initialization, and HWS initialization functions. These functions have been modified to return error codes gracefully, rather than initiating recovery. The updated functions are invoked within ivpu_probe() and ivpu_resume(), ensuring that any errors encountered during these stages result in a proper teardown or shutdown sequence. The previous approach of triggering recovery within these functions could lead to a race condition, potentially causing undefined behavior and kernel crashes due to null pointer dereferences. Fixes: 45e45362e095 ("accel/ivpu: Introduce ivpu_ipc_send_receive_active()") Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-23-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Fix reset_engine debugfs file logicAndrzej Kacprowski
The current reset_engine implementation unconditionally resets all engines. Improve implementation to reset only the engine requested by the user space to allow more granular testing. Also use DEFINE_DEBUGFS_ATTRIBUTE() to simplify implementation. Same changes applied to resume_engine debugfs file for consistency. Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-22-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Remove skip of clock own resource ack on SimicsKarol Wachowski
With recent Simics model update CLOCK_RESOURCE_OWN_ACK signal was implemented as part of VPU STATUS register and workaround is no longer needed. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-21-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add test_mode bit to force turboAndrzej Kacprowski
Add new test_mode BIT(9) that forces firmware to enable turbo burst mode. Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-20-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Make DB_ID and JOB_ID allocations incrementalTomasz Rusinowicz
Save last used ID and use it to limit the possible values for the ID. This should decrease the rate at which the IDs are reused, which will make debugging easier. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-19-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Print JSM message result in case of errorKarol Wachowski
Change debug message to error level in case of receiving non-successful result of JSM message. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-18-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add auto selection logic for job schedulerJacek Lawrynowicz
Add ivpu_fw_sched_mode_select() function that can select scheduling mode based on HW and FW versions. This prepares for a switch to HWS on selected platforms. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-17-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add one jiffy to bo_wait_ioctl timeout valueKarol Wachowski
Add one jiffy to ensure wait function never times out before intended timeout value, which could happen if absolute timeout value is less than (1s / CONFIG_HZ) in the future. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-16-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Allow reading dvfs_mode debugfs fileAndrzej Kacprowski
Make the dvfs_mode read-write to allow checking current mode. Simplify the dvfs_mode implementation with the DEFINE_DEBUGFS_ATTRIBUTE. Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-15-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Remove 1-tile power up Simics workaroundKarol Wachowski
Previously Simics was not providing workpoint for configurations with 0 tiles enabled, that had to be worked around in the KMD. This got fixed in Simics and workaround is no longer needed. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-14-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Stop using hardcoded DRIVER_DATEJacek Lawrynowicz
Hardcoded driver date is useless, so use kernel version as a driver date to make identifying .ko file easier. Also allow to pass DRIVER_DATE on build time to allow versioning the driver in case it is built out of the tree. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-13-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add FW version debugfs entryKarol Wachowski
Add debugfs that prints current firmware version string on read. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-12-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Turn on autosuspend on SimicsKarol Wachowski
With recent Simics update DVFS flows using cdyn were fixed and it is possible to enable D0i3/D3 entry flows on autosuspend. Set autosuspend timeout to 100 ms by default on Simics. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-11-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Set 500 ns delay between power island TRICKLE and ENABLEKarol Wachowski
Follow HW documentation recommendation of 500 ns delay between setting AON_PWR_ISLAND_TRICKLE_EN and AON_PWR_ISLAND_EN registers during power island enabling. Previously this was only done correctly for VPU 4+. VPU 3.7 had the delay added after power island disable where it is not needed. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-10-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add FW state dump on TDRTomasz Rusinowicz
Send JSM state dump message at the beginning of TDR handler. This allows FW to collect debug info in the FW log before the state of the NPU is lost allowing to analyze the cause of a TDR. Wait a predefined timeout (10 ms) so the FW has a chance to write debug logs. We cannot wait for JSM response at this point because IRQs are already disabled before TDR handler is invoked. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-9-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Add coredump supportKarol Wachowski
Use coredump (if available) to collect FW logs in case of a FW crash. This makes dmesg more readable and allows to collect more log data. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-8-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Limit FW version string lengthJacek Lawrynowicz
Limit FW version string, when parsing FW binary, to 256 bytes and always add NULL-terminate it. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-7-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Fix fw log printingJacek Lawrynowicz
- Fix empty log detection that couldn't work without read_wrap_count - Start printing wrapped log from correct position (log_start) - Properly handle logs that are wrapped multiple times in reference to reader position - Don't add a newline when log buffer is wrapped - Always add a newline after printing a log buffer in case log does not end with one Reviewed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-6-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Refactor functions in ivpu_fw_log.cJacek Lawrynowicz
Make function names more consistent and (arguably) readable in fw log code. Add fw_log_print_all_in_bo() that remove duplicated code in ivpu_fw_log_print(). Reviewed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-5-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Reset fw log on cold bootTomasz Rusinowicz
Add ivpu_fw_log_reset() that resets the read_index of all FW logs on cold boot so logs are properly read. Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-4-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Rename ivpu_log_level to fw_log_levelJacek Lawrynowicz
Rename module param ivpu_log_level to fw_log_level, so it is clear what log level is actually changed. Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-3-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11accel/ivpu: Update VPU FW API headersAndrzej Kacprowski
This commit bumps: - Boot API from 3.24.0 to 3.26.3 - JSM API from 3.16.0 to 3.25.0 Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Co-developed-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-2-jacek.lawrynowicz@linux.intel.com Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2024-10-11xfs: fix integer overflow in xrep_bmapDarrick J. Wong
The variable declaration in this function predates the merge of the nrext64 (aka 64-bit extent counters) feature, which means that the variable declaration type is insufficient to avoid an integer overflow. Fix that by redeclaring the variable to be xfs_extnum_t. Coverity-id: 1630958 Fixes: 8f71bede8efd ("xfs: repair inode fork block mapping data structures") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2024-10-11Merge tag 'arm-soc/for-6.12/devicetree-fixes' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 6.12, please pull the following: - Florian fixed the HDMI gpio pin which is connected to GPIO pin 0, not 1 * tag 'arm-soc/for-6.12/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2837-rpi-cm3-io3: Fix HDMI hpd-gpio pin Link: https://lore.kernel.org/r/20241008220440.23182-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-10-11Merge tag 'soc_fsl-6.12-3' of https://github.com/chleroy/linux into arm/fixesArnd Bergmann
FSL SOC fixes for v6.12: - Fix a "cast to pointer from integer of different size" build error due to IS_ERROR_VALUE() used with something which is not a pointer. - Fix an unused data build warning. * tag 'soc_fsl-6.12-3' of https://github.com/chleroy/linux: soc: fsl: cpm1: qmc: Fix unused data compilation warning soc: fsl: cpm1: qmc: Do not use IS_ERR_VALUE() on error pointers Link: https://lore.kernel.org/r/c954bdb0-0c16-491a-8662-37e58f07208f@csgroup.eu Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-10-11Documentation/process: maintainer-soc: clarify submitting patchesKrzysztof Kozlowski
Patches for SoCs are expected to be picked up by SoC submaintainers. The main SoC maintainers should be addressed only in few cases. Rewrite the section about maintainer handling to document above expectation. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Will Deacon <will@kernel.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Conor Dooley <conor@kernel.org> Cc: Heiko Stübner <heiko@sntech.de> Link: https://lore.kernel.org/r/20240925095635.30452-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-10-11dmaengine: cirrus: check that output may be truncatedAlexander Sverdlin
ep93xx_dma.c: In function 'ep93xx_dma_of_probe': ep93xx_dma.c:1409:74: warning: '%u' directive output may be truncated writing between 1 and 8 bytes into a region of size 2 [-Wformat-truncation=] snprintf(dma_clk_name, sizeof(dma_clk_name), "m2p%u", i); ^~ Fixes: d7333f9d3377 ("dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202409172024.pU8U5beA-lkp@intel.com/ Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/2bf9c37aad8f085839f9c63104f7275742f51945.camel@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-10-11dmaengine: cirrus: ERR_CAST() ioremap errorAlexander Sverdlin
ep93xx_dma.c:1354:37: sparse: sparse: incorrect type in return expression (different address spaces) ep93xx_dma.c:1354:37: sparse: expected struct ep93xx_dma_engine * ep93xx_dma.c:1354:37: sparse: got void [noderef] __iomem *regs Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202409202250.fPlN2Erd-lkp@intel.com/ Fixes: 4e8ad5ed845b ("dmaengine: cirrus: Convert to DT for Cirrus EP93xx") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/d4b542f1d678796fbf094ebcc77295af3617bca0.camel@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-10-11MAINTAINERS: use the canonical soc mailing list address and mark it as L:Konstantin Ryabitsev
The soc@kernel.org address started out as a mail alias, but at some point became a mailing list. Use the canonical name of the list and properly mark it as L: instead of M:. Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-10-11ALSA: scarlett2: Add error check after retrieving PEQ filter valuesZhu Jun
Add error check after retrieving PEQ filter values in scarlett2_update_filter_values that ensure function returns error if PEQ filter value retrieval fails. Fixes: b64678eb4e70 ("ALSA: scarlett2: Add DSP controls") Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20241009092305.8570-1-zhujun2@cmss.chinamobile.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-10-11ALSA: hda/cs8409: Fix possible NULL dereferenceMurad Masimov
If snd_hda_gen_add_kctl fails to allocate memory and returns NULL, then NULL pointer dereference will occur in the next line. Since dolphin_fixups function is a hda_fixup function which is not supposed to return any errors, add simple check before dereference, ignore the fail. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 20e507724113 ("ALSA: hda/cs8409: Add support for dolphin") Signed-off-by: Murad Masimov <m.masimov@maxima.ru> Link: https://patch.msgid.link/20241010221649.1305-1-m.masimov@maxima.ru Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-10-11HID: wacom: Hardcode (non-inverted) AES pens as BTN_TOOL_PENJason Gerecke
Unlike EMR tools which encode type information in their tool ID, tools for AES sensors are all "generic pens". It is inappropriate to make use of the wacom_intuos_get_tool_type function when dealing with these kinds of devices. Instead, we should only ever report BTN_TOOL_PEN or BTN_TOOL_RUBBER, as depending on the state of the Eraser and Invert bits. Reported-by: Daniel Jutz <daniel@djutz.com> Closes: https://lore.kernel.org/linux-input/3cd82004-c5b8-4f2a-9a3b-d88d855c65e4@heusel.eu/ Bisected-by: Christian Heusel <christian@heusel.eu> Fixes: 9c2913b962da ("HID: wacom: more appropriate tool type categorization") Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1041 Link: https://github.com/linuxwacom/input-wacom/issues/440 Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Cc: stable@vger.kernel.org Acked-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-10-11sched/core: Dequeue PSI signals for blocked tasks that are delayedPeter Zijlstra
psi_dequeue() in for blocked task expects psi_sched_switch() to clear the TSK_.*RUNNING PSI flags and set the TSK_IOWAIT flags however psi_sched_switch() uses "!task_on_rq_queued(prev)" to detect if the task is blocked or still runnable which is no longer true with DELAY_DEQUEUE since a blocking task can be left queued on the runqueue. This can lead to PSI splats similar to: psi: inconsistent task state! task=... cpu=... psi_flags=4 clear=0 set=4 when the task is requeued since the TSK_RUNNING flag was not cleared when the task was blocked. Explicitly communicate that the task was blocked to psi_sched_switch() even if it was delayed and is still on the runqueue. [ prateek: Broke off the relevant part from [1], commit message ] Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue") Closes: https://lore.kernel.org/lkml/20240830123458.3557-1-spasswolf@web.de/ Closes: https://lore.kernel.org/all/cd67fbcd-d659-4822-bb90-7e8fbb40a856@molgen.mpg.de/ Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Not-yet-signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Johannes Weiner <hannes@cmpxchg.org> Link: https://lore.kernel.org/lkml/20241004123506.GR18071@noisy.programming.kicks-ass.net/ [1]
2024-10-11sched: Fix delayed_dequeue vs switched_from_fair()Peter Zijlstra
Commit 2e0199df252a ("sched/fair: Prepare exit/cleanup paths for delayed_dequeue") and its follow up fixes try to deal with a rather unfortunate situation where is task is enqueued in a new class, even though it shouldn't have been. Mostly because the existing ->switched_to/from() hooks are in the wrong place for this case. This all led to Paul being able to trigger failures at something like once per 10k CPU hours of RCU torture. For now, do the ugly thing and move the code to the right place by ignoring the switch hooks. Note: Clean up the whole sched_class::switch*_{to,from}() thing. Fixes: 2e0199df252a ("sched/fair: Prepare exit/cleanup paths for delayed_dequeue") Reported-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20241003185037.GA5594@noisy.programming.kicks-ass.net
2024-10-11sched/core: Disable page allocation in task_tick_mm_cid()Waiman Long
With KASAN and PREEMPT_RT enabled, calling task_work_add() in task_tick_mm_cid() may cause the following splat. [ 63.696416] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 63.696416] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 610, name: modprobe [ 63.696416] preempt_count: 10001, expected: 0 [ 63.696416] RCU nest depth: 1, expected: 1 This problem is caused by the following call trace. sched_tick() [ acquire rq->__lock ] -> task_tick_mm_cid() -> task_work_add() -> __kasan_record_aux_stack() -> kasan_save_stack() -> stack_depot_save_flags() -> alloc_pages_mpol_noprof() -> __alloc_pages_noprof() -> get_page_from_freelist() -> rmqueue() -> rmqueue_pcplist() -> __rmqueue_pcplist() -> rmqueue_bulk() -> rt_spin_lock() The rq lock is a raw_spinlock_t. We can't sleep while holding it. IOW, we can't call alloc_pages() in stack_depot_save_flags(). The task_tick_mm_cid() function with its task_work_add() call was introduced by commit 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid") in v6.4 kernel. Fortunately, there is a kasan_record_aux_stack_noalloc() variant that calls stack_depot_save_flags() while not allowing it to allocate new pages. To allow task_tick_mm_cid() to use task_work without page allocation, a new TWAF_NO_ALLOC flag is added to enable calling kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack() if set. The task_tick_mm_cid() function is modified to add this new flag. The possible downside is the missing stack trace in a KASAN report due to new page allocation required when task_work_add_noallloc() is called which should be rare. Fixes: 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid") Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20241010014432.194742-1-longman@redhat.com
2024-10-11sched/deadline: Use hrtick_enabled_dl() before start_hrtick_dl()Phil Auld
The deadline server code moved one of the start_hrtick_dl() calls but dropped the dl specific hrtick_enabled check. This causes hrticks to get armed even when sched_feat(HRTICK_DL) is false. Fix it. Fixes: 63ba8422f876 ("sched/deadline: Introduce deadline servers") Signed-off-by: Phil Auld <pauld@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Juri Lelli <juri.lelli@redhat.com> Link: https://lore.kernel.org/r/20241004123729.460668-1-pauld@redhat.com
2024-10-11phy: usb: disable COMMONONN for dual modeJustin Chen
The COMMONONN bit suspends the phy when the port is put into a suspend state. However when the phy is shared between host and device in dual mode, this no longer works cleanly as there is no synchronization between the two. Fixes: 5095d045a962 ("phy: usb: Turn off phy when port is in suspend") Signed-off-by: Justin Chen <justin.chen@broadcom.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20241010185344.859865-1-justin.chen@broadcom.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-11xfrm: fix one more kernel-infoleak in algo dumpingPetr Vaganov
During fuzz testing, the following issue was discovered: BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x598/0x2a30 _copy_to_iter+0x598/0x2a30 __skb_datagram_iter+0x168/0x1060 skb_copy_datagram_iter+0x5b/0x220 netlink_recvmsg+0x362/0x1700 sock_recvmsg+0x2dc/0x390 __sys_recvfrom+0x381/0x6d0 __x64_sys_recvfrom+0x130/0x200 x64_sys_call+0x32c8/0x3cc0 do_syscall_64+0xd8/0x1c0 entry_SYSCALL_64_after_hwframe+0x79/0x81 Uninit was stored to memory at: copy_to_user_state_extra+0xcc1/0x1e00 dump_one_state+0x28c/0x5f0 xfrm_state_walk+0x548/0x11e0 xfrm_dump_sa+0x1e0/0x840 netlink_dump+0x943/0x1c40 __netlink_dump_start+0x746/0xdb0 xfrm_user_rcv_msg+0x429/0xc00 netlink_rcv_skb+0x613/0x780 xfrm_netlink_rcv+0x77/0xc0 netlink_unicast+0xe90/0x1280 netlink_sendmsg+0x126d/0x1490 __sock_sendmsg+0x332/0x3d0 ____sys_sendmsg+0x863/0xc30 ___sys_sendmsg+0x285/0x3e0 __x64_sys_sendmsg+0x2d6/0x560 x64_sys_call+0x1316/0x3cc0 do_syscall_64+0xd8/0x1c0 entry_SYSCALL_64_after_hwframe+0x79/0x81 Uninit was created at: __kmalloc+0x571/0xd30 attach_auth+0x106/0x3e0 xfrm_add_sa+0x2aa0/0x4230 xfrm_user_rcv_msg+0x832/0xc00 netlink_rcv_skb+0x613/0x780 xfrm_netlink_rcv+0x77/0xc0 netlink_unicast+0xe90/0x1280 netlink_sendmsg+0x126d/0x1490 __sock_sendmsg+0x332/0x3d0 ____sys_sendmsg+0x863/0xc30 ___sys_sendmsg+0x285/0x3e0 __x64_sys_sendmsg+0x2d6/0x560 x64_sys_call+0x1316/0x3cc0 do_syscall_64+0xd8/0x1c0 entry_SYSCALL_64_after_hwframe+0x79/0x81 Bytes 328-379 of 732 are uninitialized Memory access of size 732 starts at ffff88800e18e000 Data copied to user address 00007ff30f48aff0 CPU: 2 PID: 18167 Comm: syz-executor.0 Not tainted 6.8.11 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Fixes copying of xfrm algorithms where some random data of the structure fields can end up in userspace. Padding in structures may be filled with random (possibly sensitve) data and should never be given directly to user-space. A similar issue was resolved in the commit 8222d5910dae ("xfrm: Zero padding when dumping algos and encap") Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: c7a5899eb26e ("xfrm: redact SA secret with lockdown confidentiality") Cc: stable@vger.kernel.org Co-developed-by: Boris Tonofa <b.tonofa@ideco.ru> Signed-off-by: Boris Tonofa <b.tonofa@ideco.ru> Signed-off-by: Petr Vaganov <p.vaganov@ideco.ru> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2024-10-11serial: qcom-geni: rename suspend functionsJohan Hovold
Drop the unnecessary "_sys" infix from the suspend PM ops. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20241009145110.16847-10-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: qcom-geni: drop unused receive parameterJohan Hovold
Serial drivers should not be dropping characters themselves, but at least drop the unused 'drop' parameter from the receive handler for now. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20241009145110.16847-9-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: qcom-geni: drop flip buffer WARN()Johan Hovold
Drop the unnecessary WARN() in case the TTY buffers are ever full in favour of a rate limited dev_err() which doesn't kill the machine when panic_on_warn is set. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20241009145110.16847-8-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-11serial: qcom-geni: fix rx cancel dma status bitJohan Hovold
Cancelling an rx command is signalled using bit 14 of the rx DMA status register and not bit 11. This bit is currently unused, but this error becomes apparent, for example, when tracing the status register when closing the port. Fixes: eddac5af0654 ("soc: qcom: Add GENI based QUP Wrapper driver") Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20241009145110.16847-7-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-10-02 17:07:59 +0000