summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-12-22Merge tag 'nand/for-6.8' into mtd/nextMiquel Raynal
* Raw NAND The most meaningful change being the conversion of the brcmnand driver to the ->exec_op() API, this series brought additional changes to the core in order to help controller drivers to handle themselves the WP pin during destructive operations when relevant. As always, there is as well a whole bunch of miscellaneous W=1 fixes, together with a few runtime fixes (double free, timeout value, OOB layout, missing register initialization) and the usual load of remove callbacks turned into void (which led to switch the txx9ndfmc driver to use module_platform_driver()).
2023-12-22Merge tag 'spi-nor/for-6.8' into mtd/nextMiquel Raynal
SPI NOR comes with die erase support for multi die flashes, with new octal protocols (1-1-8 and 1-8-8) parsed from SFDP and with an updated documentation about what the contributors shall consider when proposing flash additions or updates. Michael Walle stepped out from the reviewer role to maintainer.
2023-12-22mtd: rawnand: Clarify conditions to enable continuous readsMiquel Raynal
The current logic is probably fine but is a bit convoluted. Plus, we don't want partial pages to be part of the sequential operation just in case the core would optimize the page read with a subpage read (which would break the sequence). This may happen on the first and last page only, so if the start offset or the end offset is not aligned with a page boundary, better avoid them to prevent any risk. Cc: stable@vger.kernel.org Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Martin Hundebøll <martin@geanix.com> Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-5-miquel.raynal@bootlin.com
2023-12-22mtd: rawnand: Prevent sequential reads with on-die ECC enginesMiquel Raynal
Some devices support sequential reads when using the on-die ECC engines, some others do not. It is a bit hard to know which ones will break other than experimentally, so in order to avoid such a difficult and painful task, let's just pretend all devices should avoid using this optimization when configured like this. Cc: stable@vger.kernel.org Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Martin Hundebøll <martin@geanix.com> Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-4-miquel.raynal@bootlin.com
2023-12-22mtd: rawnand: Fix core interference with sequential readsMiquel Raynal
A couple of reports pointed at some strange failures happening a bit randomly since the introduction of sequential page reads support. After investigation it turned out the most likely reason for these issues was the fact that sometimes a (longer) read might happen, starting at the same page that was read previously. This is optimized by the raw NAND core, by not sending the READ_PAGE command to the NAND device and just reading out the data in a local cache. When this page is also flagged as being the starting point for a sequential read, it means the page right next will be accessed without the right instructions. The NAND chip will be confused and will not output correct data. In order to avoid such situation from happening anymore, we can however handle this case with a bit of additional logic, to postpone the initialization of the read sequence by one page. Reported-by: Alexander Shiyan <eagle.alexander923@gmail.com> Closes: https://lore.kernel.org/linux-mtd/CAP1tNvS=NVAm-vfvYWbc3k9Cx9YxMc2uZZkmXk8h1NhGX877Zg@mail.gmail.com/ Reported-by: Måns Rullgård <mans@mansr.com> Closes: https://lore.kernel.org/linux-mtd/yw1xfs6j4k6q.fsf@mansr.com/ Reported-by: Martin Hundebøll <martin@geanix.com> Closes: https://lore.kernel.org/linux-mtd/9d0c42fcde79bfedfe5b05d6a4e9fdef71d3dd52.camel@geanix.com/ Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Martin Hundebøll <martin@geanix.com> Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-3-miquel.raynal@bootlin.com
2023-12-22mtd: rawnand: Prevent crossing LUN boundaries during sequential readsMiquel Raynal
The ONFI specification states that devices do not need to support sequential reads across LUN boundaries. In order to prevent such event from happening and possibly failing, let's introduce the concept of "pause" in the sequential read to handle these cases. The first/last pages remain the same but any time we cross a LUN boundary we will end and restart (if relevant) the sequential read operation. Cc: stable@vger.kernel.org Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Martin Hundebøll <martin@geanix.com> Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-2-miquel.raynal@bootlin.com
2023-12-22mtd: Fix gluebi NULL pointer dereference caused by ftl notifierZhaoLong Wang
If both ftl.ko and gluebi.ko are loaded, the notifier of ftl triggers NULL pointer dereference when trying to access ‘gluebi->desc’ in gluebi_read(). ubi_gluebi_init ubi_register_volume_notifier ubi_enumerate_volumes ubi_notify_all gluebi_notify nb->notifier_call() gluebi_create mtd_device_register mtd_device_parse_register add_mtd_device blktrans_notify_add not->add() ftl_add_mtd tr->add_mtd() scan_header mtd_read mtd_read_oob mtd_read_oob_std gluebi_read mtd->read() gluebi->desc - NULL Detailed reproduction information available at the Link [1], In the normal case, obtain gluebi->desc in the gluebi_get_device(), and access gluebi->desc in the gluebi_read(). However, gluebi_get_device() is not executed in advance in the ftl_add_mtd() process, which leads to NULL pointer dereference. The solution for the gluebi module is to run jffs2 on the UBI volume without considering working with ftl or mtdblock [2]. Therefore, this problem can be avoided by preventing gluebi from creating the mtdblock device after creating mtd partition of the type MTD_UBIVOLUME. Fixes: 2ba3d76a1e29 ("UBI: make gluebi a separate module") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217992 [1] Link: https://lore.kernel.org/lkml/441107100.23734.1697904580252.JavaMail.zimbra@nod.at/ [2] Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231220024619.2138625-1-wangzhaolong1@huawei.com
2023-12-22dt-bindings: mtd: partitions: u-boot: Fix typoStefan Wahren
The initial description contained a typo. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231218130656.9020-1-wahrenst@gmx.net
2023-12-20mtd: rawnand: s3c2410: fix Excess struct member description kernel-doc warningsRandy Dunlap
Delete 2 lines to prevent warnings from scripts/kernel-doc: s3c2410.c:117: warning: Excess struct member 'mtd' description in 's3c2410_nand_mtd' s3c2410.c:168: warning: Excess struct member 'freq_transition' description in 's3c2410_nand_info' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312150611.EZBAQYqf-lkp@intel.com/ Cc: Arnd Bergmann <arnd@arndb.de> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231216044146.18645-1-rdunlap@infradead.org
2023-12-20MAINTAINERS: change my mail to the kernel.org oneMichael Walle
As I'm doing more and more work professionally, move away from my private mail address. Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20231219091218.2846297-1-michael@walle.cc Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-12-20mtd: spi-nor: sfdp: get the 1-1-8 and 1-8-8 protocol from SFDPJaimeLiao
BFPT 17th DWORD contains the information about 1-1-8 and 1-8-8. Parse BFPT DWORD[17] instruction to determine whether flash supports 1-1-8 and 1-8-8, and set its dummy cycles accordingly. Validated only the 1-1-8 read using a macronix flash with Xilinx board zynq-picozed. Signed-off-by: JaimeLiao <jaimeliao@mxic.com.tw> Reviewed-by: Michael Walle <mwalle@kernel.org> Link: https://lore.kernel.org/r/20231219102103.92738-2-jaimeliao.tw@gmail.com [ta: update commit message, get rid of extra dereference] Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-12-19mtd: spi-nor: drop superfluous debug printsTudor Ambarus
The mtd data shall be obtained with the mtd ioctls or with new debugfs entries if one cares. Drop the debug prints. Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20231215082138.16063-5-tudor.ambarus@linaro.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-12-19mtd: spi-nor: sysfs: hide the flash name if not setJaimeLiao
The flash name is not reliable as we saw flash ID collisions. Hide the flash name if not set. Signed-off-by: JaimeLiao <jaimeliao@mxic.com.tw> Reviewed-by: Michael Walle <michael@walle.cc> [ta: update commit subject and description and the sysfs description] Link: https://lore.kernel.org/r/20231215082138.16063-4-tudor.ambarus@linaro.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-12-19mtd: spi-nor: mark the flash name as obsoleteTudor Ambarus
The flash name is unreliable as we saw flash ID collisions. Mark the name as obsolete. Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20231215082138.16063-3-tudor.ambarus@linaro.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-12-19mtd: spi-nor: print flash ID instead of nameTudor Ambarus
We saw flash ID collisions which make the flash name unreliable. Print the manufacturer and device ID instead of the flash name. Lower the print to dev_dbg to stop polluting the kernel log. Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20231215082138.16063-2-tudor.ambarus@linaro.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-12-14mtd: maps: vmu-flash: Fix the (mtd core) switch to ref countersMiquel Raynal
While switching to ref counters for track mtd devices use, the vmu-flash driver was forgotten. The reason for reading the ref counter seems debatable, but let's just fix the build for now. Fixes: 19bfa9ebebb5 ("mtd: use refcount to prevent corruption") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312022315.79twVRZw-lkp@intel.com/ Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231205075936.13831-1-miquel.raynal@bootlin.com
2023-12-14mtd: ssfdc: Remove an unused variableMiquel Raynal
Since its introduction the driver was declaring a "usecount" variable, but nobody ever used it upstream. This was spot while grepping for usecount through mtd/ for other reasons. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231205075431.13401-1-miquel.raynal@bootlin.com
2023-12-14mtd: rawnand: diskonchip: fix a potential double free in doc_probeDinghao Liu
When nand_scan() fails, it has cleaned up related resources in its error paths. Therefore, the following nand_cleanup() may lead to a double-free. One possible trace is: doc_probe |-> nand_scan | |-> nand_scan_with_ids | |-> nand_scan_tail | |-> kfree(chip->data_buf) [First free] | |-> nand_cleanup |-> kfree(chip->data_buf) [Double free here] Fix this by removing nand_cleanup() on failure of nand_scan(). Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231214072946.10285-1-dinghao.liu@zju.edu.cn
2023-12-14mtd: rawnand: rockchip: Add missing title to a kernel doc commentMiquel Raynal
All fields of the nfc_cfg structure are documented but the name, which leads to a W=1 warning. Add a title. Fixes: 058e0e847d54 ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231211150704.109138-2-miquel.raynal@bootlin.com
2023-12-14mtd: rawnand: rockchip: Rename a structureMiquel Raynal
Robots are unhappy with the ecc_cnt_status structure because the kernel doc says it should be called rk_ecc_cnt_status. In general, it is considered a better practice to prefix all symbols in a file with the same prexif, and thus it seems more relevant to rename the structure rather than changing the kernel doc header. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312102130.geZ4dqyN-lkp@intel.com/ Fixes: 058e0e847d54 ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231211150704.109138-1-miquel.raynal@bootlin.com
2023-12-14mtd: rawnand: pl353: Fix kernel docMiquel Raynal
Both the "chip" kernel doc member and description are wrong. This field is called "chips" and describes the list of NAND chips connected to the controller. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312102130.geZ4dqyN-lkp@intel.com/ Fixes: 08d8c62164a3 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231211150524.108803-1-miquel.raynal@bootlin.com
2023-12-06mtd: spi-nor: micron-st: Add support for mt25qu01gFabio Estevam
Add support for the MT25QU01G 128MB Micron Serial NOR Flash Memory model. Link: https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-b/mt25q_qlkt_u_01g_bbb_0.pdf Signed-off-by: Fabio Estevam <festevam@denx.de> [ta: introduce die erase] Link: https://lore.kernel.org/r/20231125123529.55686-6-tudor.ambarus@linaro.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-12-06mtd: spi-nor: remove NO_CHIP_ERASE flagTudor Ambarus
There's no flash using it and we'd like to rely instead on SFDP data, thus remove it. Tested-by: Fabio Estevam <festevam@denx.de> Link: https://lore.kernel.org/r/20231125123529.55686-5-tudor.ambarus@linaro.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-12-06mtd: spi-nor: micron-st: enable die erase for multi die flashesTudor Ambarus
Enable die erase for multi die flashes, it will speed the erase time. Unfortunately, Micron does not provide a 4-byte opcode equivalent for the die erase. The SFDP 4BAIT table fails to consider the die erase too, the standard can be improved. Thus we're forced to enter in the 4 byte address mode in order to benefit of the die erase. Tested on n25q00. This flash defines the 4BAIT SFDP table, thus it will use the 4BAIT opcodes for reads, page programs or erases, with the exception that it will use the die erase command in the 4 byte address mode. Link: https://media-www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_1gb_3v_65nm.pdf?rev=b6eba74759984f749f8c039bc5bc47b7 Link: https://media-www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-b/mt25q_qlkt_l_02g_cbb_0.pdf?rev=43f7f66fc8da4d7d901b35fa51284c8f Link: https://lore.kernel.org/r/20231125123529.55686-4-tudor.ambarus@linaro.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-12-06mtd: spi-nor: spansion: enable die erase for multi die flashesTudor Ambarus
Enable die erase for spansion multi die flashes. Tested-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Link: https://lore.kernel.org/r/20231125123529.55686-3-tudor.ambarus@linaro.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-12-06mtd: spi-nor: add erase die (chip) capabilityTudor Ambarus
JESD216 mentions die erase, but does not provide an opcode for it. Check BFPT dword 11, bits 30:24, "Chip Erase, Typical time", it says: "Typical time to erase one chip (die). User must poll device busy to determine if the operation has completed. For a device consisting of multiple dies, that are individually accessed, the time is for each die to which a chip erase command is applied." So when a flash consists of a single die, this is the erase time for the full chip (die) erase, and when it consists of multiple dies, it's the die erase time. Chip and die are the same thing. Add support for die erase. For now, benefit of the die erase when addr and len are aligned with die size. This could be improved however for the uniform and non-uniform erases cases to use the die erase when possible. For example if one requests that an erase of a 2 die device starting from the last 64KB of the first die to the end of the flash size, we could use just 2 commands, a 64KB erase and a die erase. This improvement is left as an exercise for the reader. Tested-by: Fabio Estevam <festevam@denx.de> Link: https://lore.kernel.org/r/20231125123529.55686-2-tudor.ambarus@linaro.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-12-04mtd: rawnand: brcmnand: exec_op implementationDavid Regan
exec_op implementation for Broadcom STB, Broadband and iProc SoC This adds exec_op and removes the legacy interface. Based on changes proposed by Boris Brezillon. Link: https://github.com/bbrezillon/linux/commit/4ec6f8d8d83f5aaca5d1877f02d48da96d41fcba Link: https://github.com/bbrezillon/linux/commit/11b4acffd761c4928652d7028d19fcd6f45e4696 Signed-off-by: David Regan <dregan@broadcom.com> [Miquel Raynal: Misc style fixes] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231125012438.15191-4-dregan@broadcom.com
2023-12-04mtd: rawnand: brcmnand: pass host struct to bcmnand_ctrl_poll_statusDavid Regan
Pass host struct to bcmnand_ctrl_poll_status instead of ctrl struct since real time status requires host, and ctrl is a member of host. Real time status is required for low level commands vs cached status since the NAND controller will not do an automatic status read at the end of a low level command as it would with a high level command. Signed-off-by: David Regan <dregan@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231125012438.15191-3-dregan@broadcom.com
2023-12-04mtd: rawnand: NAND controller write protectDavid Regan
Allow NAND controller to be responsible for write protect pin handling during fast path and exec_op destructive operation when controller_wp flag is set. Signed-off-by: David Regan <dregan@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231125012438.15191-2-dregan@broadcom.com
2023-12-04mtd: rawnand: Add destructive operationBoris Brezillon
Erase and program operations need the write protect (wp) pin to be de-asserted to take effect. Add the concept of destructive operation and pass the information to exec_op() so controllers know when they should de-assert this pin without having to decode the command opcode. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: David Regan <dregan@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231125012438.15191-1-dregan@broadcom.com
2023-11-30mtd: rawnand: meson: handle OOB buffer according OOB layoutArseniy Krasnov
In case of MTD_OPS_AUTO_OOB mode, MTD/NAND layer fills/reads OOB buffer according current OOB layout so we need to follow it in the driver. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231109053953.3863664-1-avkrasnov@salutedevices.com
2023-11-24docs: mtd: spi-nor: drop obsolete infoTudor Ambarus
The architecture description is obsolete, it no longer applies to the current SPI NOR framework state, remove it. Reviewed-by: Michael Walle <michael@walle.cc> Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Link: https://lore.kernel.org/r/20231124184902.1194235-3-tudor.ambarus@linaro.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-11-24docs: mtd: spi-nor: add sections about flash additions and testingTudor Ambarus
Add sections about how to propose a new flash addition and about the minimum testing requirements. Reviewed-by: Michael Walle <michael@walle.cc> Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Link: https://lore.kernel.org/r/20231124184902.1194235-2-tudor.ambarus@linaro.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-11-21MAINTAINERS: spi-nor: add myself as maintainerMichael Walle
After being a reviewer for a while, add myself as a maintainer for the spi-nor subsystem. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Richard Weinberger <richard@nod.at> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20231121122134.1952738-1-michael@walle.cc Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-11-20mtd: rawnand: meson: initialize clock registerArseniy Krasnov
Clock register must be also initialized during controller probing. If this is not performed (for example by bootloader before) - controller will not work. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231120064239.3304108-1-avkrasnov@salutedevices.com
2023-11-20mtd: rawnand: Increment IFC_TIMEOUT_MSECS for nand controller responseRonald Monthero
Under heavy load it is likely that the controller is done with its own task but the thread unlocking the wait is not scheduled in time. Increasing IFC_TIMEOUT_MSECS allows the controller to respond within allowable timeslice of 1 sec. fsl,ifc-nand 7e800000.nand: Controller is not responding [<804b2047>] (nand_get_device) from [<804b5335>] (nand_write_oob+0x1b/0x4a) [<804b5335>] (nand_write_oob) from [<804a3585>] (mtd_write+0x41/0x5c) [<804a3585>] (mtd_write) from [<804c1d47>] (ubi_io_write+0x17f/0x22c) [<804c1d47>] (ubi_io_write) from [<804c047b>] (ubi_eba_write_leb+0x5b/0x1d0) Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller") Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ronald Monthero <debug.penguin32@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231118083156.776887-1-debug.penguin32@gmail.com
2023-11-15mtd: spi-nor: use kernel sized types instead of c99 typesTudor Ambarus
The kernel offers and prefers the kernel sized types instead of the c99 types when not in the uapi directory, use them. Link: https://lore.kernel.org/r/20231101145853.524045-2-tudor.ambarus@linaro.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-11-13mtd: rawnand: txx9ndfmc: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231102220246.3336154-10-u.kleine-koenig@pengutronix.de
2023-11-13mtd: rawnand: txx9ndfmc: Drop if block with always false conditionUwe Kleine-König
txx9ndfmc_remove() is only called after txx9ndfmc_probe() completed successfully. In this case platform_set_drvdata() was called with a non-NULL argument and so platform_get_drvdata() won't return NULL. Simplify by removing the if block with the always false condition. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231102220246.3336154-9-u.kleine-koenig@pengutronix.de
2023-11-13mtd: rawnand: txx9ndfmc: Switch to module_platform_driver()Uwe Kleine-König
While module_platform_driver_probe() offers the possibility to discard .probe() and .remove() in some situations, the handling is difficult and in today's systems the few hundred bytes that can be saved have little importance. So convert the driver to be a normal driver that can be bound and unbound at runtime as most other drivers, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231102220246.3336154-8-u.kleine-koenig@pengutronix.de
2023-11-13mtd: rawnand: brcmnand: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). By changing the function brcmnand_remove() to return void several drivers that use this function as remove callback can be converted to .remove_new(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231102220246.3336154-7-u.kleine-koenig@pengutronix.de
2023-11-12Linux 6.7-rc1v6.7-rc1Linus Torvalds
2023-11-12wifi: iwlwifi: fix system commands group orderingMiri Korenblit
The commands should be sorted inside the group definition. Fix the ordering so we won't get following warning: WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg)) Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/ Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/ Fixes: b6e3d1ba4fcf ("wifi: iwlwifi: mvm: implement new firmware API for statistics") Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com> Tested-by: Damian Tometzki <damian@riscv-rocks.de> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-11-12Merge tag 'parisc-for-6.7-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - Include the upper 5 address bits when inserting TLB entries on a 64-bit kernel. On physical machines those are ignored, but in qemu it's nice to have them included and to be correct. - Stop the 64-bit kernel and show a warning if someone tries to boot on a machine with a 32-bit CPU - Fix a "no previous prototype" warning in parport-gsc * tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Prevent booting 64-bit kernels on PA1.x machines parport: gsc: mark init function static parisc/pgtable: Do not drop upper 5 address bits of physical address
2023-11-12Merge tag 'loongarch-6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - support PREEMPT_DYNAMIC with static keys - relax memory ordering for atomic operations - support BPF CPU v4 instructions for LoongArch - some build and runtime warning fixes * tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: selftests/bpf: Enable cpu v4 tests for LoongArch LoongArch: BPF: Support signed mod instructions LoongArch: BPF: Support signed div instructions LoongArch: BPF: Support 32-bit offset jmp instructions LoongArch: BPF: Support unconditional bswap instructions LoongArch: BPF: Support sign-extension mov instructions LoongArch: BPF: Support sign-extension load instructions LoongArch: Add more instruction opcodes and emit_* helpers LoongArch/smp: Call rcutree_report_cpu_starting() earlier LoongArch: Relax memory ordering for atomic operations LoongArch: Mark __percpu functions as always inline LoongArch: Disable module from accessing external data directly LoongArch: Support PREEMPT_DYNAMIC with static keys
2023-11-12Merge tag 'powerpc-6.7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Finish a refactor of pgprot_framebuffer() which dependend on some changes that were merged via the drm tree - Fix some kernel-doc warnings to quieten the bots Thanks to Nathan Lynch and Thomas Zimmermann. * tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code powerpc: Remove file parameter from phys_mem_access_prot() powerpc/machdep: Remove trailing whitespaces
2023-11-11Merge tag '6.7-rc-smb3-client-fixes-part2' of ↵Linus Torvalds
git://git.samba.org/sfrench/cifs-2.6 Pull smb client fixes from Steve French: - ctime caching fix (for setxattr) - encryption fix - DNS resolver mount fix - debugging improvements - multichannel fixes including cases where server stops or starts supporting multichannel after mount - reconnect fix - minor cleanups * tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number for cifs.ko cifs: handle when server stops supporting multichannel cifs: handle when server starts supporting multichannel Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO smb3: allow dumping session and tcon id to improve stats analysis and debugging smb: client: fix mount when dns_resolver key is not available smb3: fix caching of ctime on setxattr smb3: minor cleanup of session handling code cifs: reconnect work should have reference on server struct cifs: do not pass cifs_sb when trying to add channels cifs: account for primary channel in the interface list cifs: distribute channels across interfaces based on speed cifs: handle cases where a channel is closed smb3: more minor cleanups for session handling routines smb3: minor RDMA cleanup cifs: Fix encryption of cleared, but unset rq_iter data buffers
2023-11-10Merge tag 'probes-fixes-v6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - Documentation update: Add a note about argument and return value fetching is the best effort because it depends on the type. - objpool: Fix to make internal global variables static in test_objpool.c. - kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the same prototypes in asm/kprobes.h for some architectures, but some of them are missing the prototype and it causes a warning. So move the prototype into linux/kprobes.h. - tracing: Fix to check the tracepoint event and return event at parsing stage. The tracepoint event doesn't support %return but if $retval exists, it will be converted to %return silently. This finds that case and rejects it. - tracing: Fix the order of the descriptions about the parameters of __kprobe_event_gen_cmd_start() to be consistent with the argument list of the function. * tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/kprobes: Fix the order of argument descriptions tracing: fprobe-event: Fix to check tracepoint event and return kprobes: unify kprobes_exceptions_nofify() prototypes lib: test_objpool: make global variables static Documentation: tracing: Add a note about argument and retval access
2023-11-10Merge tag 'fbdev-for-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes and cleanups from Helge Deller: - fix double free and resource leaks in imsttfb - lots of remove callback cleanups and section mismatch fixes in omapfb, amifb and atmel_lcdfb - error code fix and memparse simplification in omapfb * tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits) fbdev: fsl-diu-fb: mark wr_reg_wa() static fbdev: amifb: Convert to platform remove callback returning void fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning fbdev: hyperv_fb: fix uninitialized local variable use fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void fbdev: omapfb/tfp410: Convert to platform remove callback returning void fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void fbdev: omapfb/opa362: Convert to platform remove callback returning void fbdev: omapfb/hdmi: Convert to platform remove callback returning void fbdev: omapfb/dvi: Convert to platform remove callback returning void fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void fbdev: omapfb/dpi: Convert to platform remove callback returning void fbdev: omapfb/analog-tv: Convert to platform remove callback returning void fbdev: atmel_lcdfb: Convert to platform remove callback returning void fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs ...
2023-11-11tracing/kprobes: Fix the order of argument descriptionsYujie Liu
The order of descriptions should be consistent with the argument list of the function, so "kretprobe" should be the second one. int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe, const char *name, const char *loc, ...) Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/ Fixes: 2a588dd1d5d6 ("tracing: Add kprobe event command generation functions") Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Yujie Liu <yujie.liu@intel.com> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 14:25:34 +0000