summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-06iwlwifi: dbg: don't abort if sending DBGC_SUSPEND_RESUME failsLuca Coelho
If the firmware is in a bad state or not initialized fully, sending the DBGC_SUSPEND_RESUME command fails but we can still collect logs. Instead of aborting the entire dump process, simply ignore the error. By removing the last callpoint that was checking the return value, we can also convert the function to return void. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Fixes: 576058330f2d ("iwlwifi: dbg: support debug recording suspend resume command") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200306151129.dcec37b2efd4.I8dcd190431d110a6a0e88095ce93591ccfb3d78d@changeid
2020-03-06iwlwifi: yoyo: don't add TLV offset when reading FIFOsMordechay Goodstein
The TLV offset is only used to read registers, while the offset used for the FIFO addresses are hard coded in the driver and not given by the TLV. If we try to apply the TLV offset when reading the FIFOs, we'll read from invalid addresses, causing the driver to hang. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: 8d7dea25ada7 ("iwlwifi: dbg_ini: implement Rx fifos dump") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200306151129.fbab869c26fa.I4ddac20d02f9bce41855a816aa6855c89bc3874e@changeid
2020-03-06iwlwifi: check allocated pointer when allocating conf_tlvsLuca Coelho
We were erroneously checking the length of the tlv instead of checking the pointer returned by kmemdup() when allocating dbg_conf_tlv[]. This was probably a typo. Fix it by checking the returned pointer instead of the length. Reported-by: Markus Elfring <Markus.Elfring@web.de> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200306151128.06e00e6e980f.I9a890ce83493b79892a5f690d12016525317fa7e@changeid
2020-03-06iwlwifi: consider HE capability when setting LDPCMordechay Goodstein
The AP may set the LDPC capability only in HE (IEEE80211_HE_PHY_CAP1), but we were checking it only in the HT capabilities. If we don't use this capability when required, the DSP gets the wrong configuration in HE and doesn't work properly. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: befebbb30af0 ("iwlwifi: rs: consider LDPC capability in case of HE") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200306151128.492d167c1a25.I1ad1353dbbf6c99ae57814be750f41a1c9f7f4ac@changeid
2020-03-06iwlwifi: mvm: take the required lock when clearing time event dataAvraham Stern
When receiving a session protection end notification, the time event data is cleared without holding the required lock. Fix it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200306151128.a49846a634e4.Id1ada7c5a964f5e25f4d0eacc2c4b050015b46a2@changeid
2020-03-06thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to ↵Ingo Molnar
generic scheduler code drivers/base/arch_topology.c is only built if CONFIG_GENERIC_ARCH_TOPOLOGY=y, resulting in such build failures: cpufreq_cooling.c:(.text+0x1e7): undefined reference to `arch_set_thermal_pressure' Move it to sched/core.c instead, and keep it enabled on x86 despite us not having a arch_scale_thermal_pressure() facility there, to build-test this thing. Cc: Thara Gopinath <thara.gopinath@linaro.org> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "7 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: arch/Kconfig: update HAVE_RELIABLE_STACKTRACE description mm, hotplug: fix page online with DEBUG_PAGEALLOC compiled but not enabled mm/z3fold.c: do not include rwlock.h directly fat: fix uninit-memory access for partial initialized inode mm: avoid data corruption on CoW fault into PFN-mapped VMA mm: fix possible PMD dirty bit lost in set_pmd_migration_entry() mm, numa: fix bad pmd by atomically check for pmd_trans_huge when marking page tables prot_numa
2020-03-06selftests: bpf: Add test for JMP32 JSET BPF_X with upper bits setLuke Nelson
The existing tests attempt to check that JMP32 JSET ignores the upper bits in the operand registers. However, the tests missed one such bug in the x32 JIT that is only uncovered when a previous instruction pollutes the upper 32 bits of the registers. This patch adds a new test case that catches the bug by first executing a 64-bit JSET to pollute the upper 32-bits of the temporary registers, followed by a 32-bit JSET which should ignore the upper 32 bits. Co-developed-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200305234416.31597-2-luke.r.nels@gmail.com
2020-03-06bpf, x32: Fix bug with JMP32 JSET BPF_X checking upper bitsLuke Nelson
The current x32 BPF JIT is incorrect for JMP32 JSET BPF_X when the upper 32 bits of operand registers are non-zero in certain situations. The problem is in the following code: case BPF_JMP | BPF_JSET | BPF_X: case BPF_JMP32 | BPF_JSET | BPF_X: ... /* and dreg_lo,sreg_lo */ EMIT2(0x23, add_2reg(0xC0, sreg_lo, dreg_lo)); /* and dreg_hi,sreg_hi */ EMIT2(0x23, add_2reg(0xC0, sreg_hi, dreg_hi)); /* or dreg_lo,dreg_hi */ EMIT2(0x09, add_2reg(0xC0, dreg_lo, dreg_hi)); This code checks the upper bits of the operand registers regardless if the BPF instruction is BPF_JMP32 or BPF_JMP64. Registers dreg_hi and dreg_lo are not loaded from the stack for BPF_JMP32, however, they can still be polluted with values from previous instructions. The following BPF program demonstrates the bug. The jset64 instruction loads the temporary registers and performs the jump, since ((u64)r7 & (u64)r8) is non-zero. The jset32 should _not_ be taken, as the lower 32 bits are all zero, however, the current JIT will take the branch due the pollution of temporary registers from the earlier jset64. mov64 r0, 0 ld64 r7, 0x8000000000000000 ld64 r8, 0x8000000000000000 jset64 r7, r8, 1 exit jset32 r7, r8, 1 mov64 r0, 2 exit The expected return value of this program is 2; under the buggy x32 JIT it returns 0. The fix is to skip using the upper 32 bits for jset32 and compare the upper 32 bits for jset64 only. All tests in test_bpf.ko and selftests/bpf/test_verifier continue to pass with this change. We found this bug using our automated verification tool, Serval. Fixes: 69f827eb6e14 ("x32: bpf: implement jitting of JMP32") Co-developed-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200305234416.31597-1-luke.r.nels@gmail.com
2020-03-06tty: serial: fsl_lpuart: free IDs allocated by IDAMichael Walle
Since commit 3bc3206e1c0f ("serial: fsl_lpuart: Remove the alias node dependence") the port line number can also be allocated by IDA, but in case of an error the ID will no be removed again. More importantly, any ID will be freed in remove(), even if it wasn't allocated but instead fetched by of_alias_get_id(). If it was not allocated by IDA there will be a warning: WARN(1, "ida_free called for id=%d which is not allocated.\n", id); Move the ID allocation more to the end of the probe() so that we still can use plain return in the first error cases. Fixes: 3bc3206e1c0f ("serial: fsl_lpuart: Remove the alias node dependence") Signed-off-by: Michael Walle <michael@walle.cc> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200303174306.6015-3-michael@walle.cc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-06Revert "tty: serial: fsl_lpuart: drop EARLYCON_DECLARE"Michael Walle
This reverts commit a659652f6169240a5818cb244b280c5a362ef5a4. This broke the earlycon on LS1021A processors because the order of the earlycon_setup() functions were changed. Before the commit the normal lpuart32_early_console_setup() was called. After the commit the lpuart32_imx_early_console_setup() is called instead. Fixes: a659652f6169 ("tty: serial: fsl_lpuart: drop EARLYCON_DECLARE") Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20200303174306.6015-2-michael@walle.cc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-06serdev: Fix detection of UART devices on Apple machines.Ronald Tschalär
On Apple devices the _CRS method returns an empty resource template, and the resource settings are instead provided by the _DSM method. But commit 33364d63c75d6182fa369cea80315cf1bb0ee38e (serdev: Add ACPI devices by ResourceSource field) changed the search for serdev devices to require valid, non-empty resource template, thereby breaking Apple devices and causing bluetooth devices to not be found. This expands the check so that if we don't find a valid template, and we're on an Apple machine, then just check for the device being an immediate child of the controller and having a "baud" property. Cc: <stable@vger.kernel.org> # 5.5 Fixes: 33364d63c75d ("serdev: Add ACPI devices by ResourceSource field") Signed-off-by: Ronald Tschalär <ronald@innovation.ch> Link: https://lore.kernel.org/r/20200211194723.486217-1-ronald@innovation.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-06arch/Kconfig: update HAVE_RELIABLE_STACKTRACE descriptionMiroslav Benes
save_stack_trace_tsk_reliable() is not the only function providing the reliable stack traces anymore. Architecture might define ARCH_STACKWALK which provides a newer stack walking interface and has arch_stack_walk_reliable() function. Update the description accordingly. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: http://lkml.kernel.org/r/20200120154042.9934-1-mbenes@suse.cz Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-06mm, hotplug: fix page online with DEBUG_PAGEALLOC compiled but not enabledVlastimil Babka
Commit cd02cf1aceea ("mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC") fixed memory hotplug with debug_pagealloc enabled, where onlining a page goes through page freeing, which removes the direct mapping. Some arches don't like when the page is not mapped in the first place, so generic_online_page() maps it first. This is somewhat wasteful, but better than special casing page freeing fast paths. The commit however missed that DEBUG_PAGEALLOC configured doesn't mean it's actually enabled. One has to test debug_pagealloc_enabled() since 031bc5743f15 ("mm/debug-pagealloc: make debug-pagealloc boottime configurable"), or alternatively debug_pagealloc_enabled_static() since 8e57f8acbbd1 ("mm, debug_pagealloc: don't rely on static keys too early"), but this is not done. As a result, a s390 kernel with DEBUG_PAGEALLOC configured but not enabled will crash: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000483 Fault in home space mode while using kernel ASCE. AS:0000001ece13400b R2:000003fff7fd000b R3:000003fff7fcc007 S:000003fff7fd7000 P:000000000000013d Oops: 0004 ilc:2 [#1] SMP CPU: 1 PID: 26015 Comm: chmem Kdump: loaded Tainted: GX 5.3.18-5-default #1 SLE15-SP2 (unreleased) Krnl PSW : 0704e00180000000 0000001ecd281b9e (__kernel_map_pages+0x166/0x188) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000000 0000000000000800 0000400b00000000 0000000000000100 0000000000000001 0000000000000000 0000000000000002 0000000000000100 0000001ece139230 0000001ecdd98d40 0000400b00000100 0000000000000000 000003ffa17e4000 001fffe0114f7d08 0000001ecd4d93ea 001fffe0114f7b20 Krnl Code: 0000001ecd281b8e: ec17ffff00d8 ahik %r1,%r7,-1 0000001ecd281b94: ec111dbc0355 risbg %r1,%r1,29,188,3 >0000001ecd281b9e: 94fb5006 ni 6(%r5),251 0000001ecd281ba2: 41505008 la %r5,8(%r5) 0000001ecd281ba6: ec51fffc6064 cgrj %r5,%r1,6,1ecd281b9e 0000001ecd281bac: 1a07 ar %r0,%r7 0000001ecd281bae: ec03ff584076 crj %r0,%r3,4,1ecd281a5e Call Trace: [<0000001ecd281b9e>] __kernel_map_pages+0x166/0x188 [<0000001ecd4d9516>] online_pages_range+0xf6/0x128 [<0000001ecd2a8186>] walk_system_ram_range+0x7e/0xd8 [<0000001ecda28aae>] online_pages+0x2fe/0x3f0 [<0000001ecd7d02a6>] memory_subsys_online+0x8e/0xc0 [<0000001ecd7add42>] device_online+0x5a/0xc8 [<0000001ecd7d0430>] state_store+0x88/0x118 [<0000001ecd5b9f62>] kernfs_fop_write+0xc2/0x200 [<0000001ecd5064b6>] vfs_write+0x176/0x1e0 [<0000001ecd50676a>] ksys_write+0xa2/0x100 [<0000001ecda315d4>] system_call+0xd8/0x2c8 Fix this by checking debug_pagealloc_enabled_static() before calling kernel_map_pages(). Backports for kernel before 5.5 should use debug_pagealloc_enabled() instead. Also add comments. Fixes: cd02cf1aceea ("mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC") Reported-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: <stable@vger.kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Qian Cai <cai@lca.pw> Link: http://lkml.kernel.org/r/20200224094651.18257-1-vbabka@suse.cz Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-06mm/z3fold.c: do not include rwlock.h directlySebastian Andrzej Siewior
rwlock.h should not be included directly. Instead linux/splinlock.h should be included. One thing it does is to break the RT build. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200224133631.1510569-1-bigeasy@linutronix.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-06fat: fix uninit-memory access for partial initialized inodeOGAWA Hirofumi
When get an error in the middle of reading an inode, some fields in the inode might be still not initialized. And then the evict_inode path may access those fields via iput(). To fix, this makes sure that inode fields are initialized. Reported-by: syzbot+9d82b8de2992579da5d0@syzkaller.appspotmail.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/871rqnreqx.fsf@mail.parknet.co.jp Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-06mm: avoid data corruption on CoW fault into PFN-mapped VMAKirill A. Shutemov
Jeff Moyer has reported that one of xfstests triggers a warning when run on DAX-enabled filesystem: WARNING: CPU: 76 PID: 51024 at mm/memory.c:2317 wp_page_copy+0xc40/0xd50 ... wp_page_copy+0x98c/0xd50 (unreliable) do_wp_page+0xd8/0xad0 __handle_mm_fault+0x748/0x1b90 handle_mm_fault+0x120/0x1f0 __do_page_fault+0x240/0xd70 do_page_fault+0x38/0xd0 handle_page_fault+0x10/0x30 The warning happens on failed __copy_from_user_inatomic() which tries to copy data into a CoW page. This happens because of race between MADV_DONTNEED and CoW page fault: CPU0 CPU1 handle_mm_fault() do_wp_page() wp_page_copy() do_wp_page() madvise(MADV_DONTNEED) zap_page_range() zap_pte_range() ptep_get_and_clear_full() <TLB flush> __copy_from_user_inatomic() sees empty PTE and fails WARN_ON_ONCE(1) clear_page() The solution is to re-try __copy_from_user_inatomic() under PTL after checking that PTE is matches the orig_pte. The second copy attempt can still fail, like due to non-readable PTE, but there's nothing reasonable we can do about, except clearing the CoW page. Reported-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Jeff Moyer <jmoyer@redhat.com> Cc: <stable@vger.kernel.org> Cc: Justin He <Justin.He@arm.com> Cc: Dan Williams <dan.j.williams@intel.com> Link: http://lkml.kernel.org/r/20200218154151.13349-1-kirill.shutemov@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-06mm: fix possible PMD dirty bit lost in set_pmd_migration_entry()Huang Ying
In set_pmd_migration_entry(), pmdp_invalidate() is used to change PMD atomically. But the PMD is read before that with an ordinary memory reading. If the THP (transparent huge page) is written between the PMD reading and pmdp_invalidate(), the PMD dirty bit may be lost, and cause data corruption. The race window is quite small, but still possible in theory, so need to be fixed. The race is fixed via using the return value of pmdp_invalidate() to get the original content of PMD, which is a read/modify/write atomic operation. So no THP writing can occur in between. The race has been introduced when the THP migration support is added in the commit 616b8371539a ("mm: thp: enable thp migration in generic path"). But this fix depends on the commit d52605d7cb30 ("mm: do not lose dirty and accessed bits in pmdp_invalidate()"). So it's easy to be backported after v4.16. But the race window is really small, so it may be fine not to backport the fix at all. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Link: http://lkml.kernel.org/r/20200220075220.2327056-1-ying.huang@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-06mm, numa: fix bad pmd by atomically check for pmd_trans_huge when marking ↵Mel Gorman
page tables prot_numa : A user reported a bug against a distribution kernel while running a : proprietary workload described as "memory intensive that is not swapping" : that is expected to apply to mainline kernels. The workload is : read/write/modifying ranges of memory and checking the contents. They : reported that within a few hours that a bad PMD would be reported followed : by a memory corruption where expected data was all zeros. A partial : report of the bad PMD looked like : : [ 5195.338482] ../mm/pgtable-generic.c:33: bad pmd ffff8888157ba008(000002e0396009e2) : [ 5195.341184] ------------[ cut here ]------------ : [ 5195.356880] kernel BUG at ../mm/pgtable-generic.c:35! : .... : [ 5195.410033] Call Trace: : [ 5195.410471] [<ffffffff811bc75d>] change_protection_range+0x7dd/0x930 : [ 5195.410716] [<ffffffff811d4be8>] change_prot_numa+0x18/0x30 : [ 5195.410918] [<ffffffff810adefe>] task_numa_work+0x1fe/0x310 : [ 5195.411200] [<ffffffff81098322>] task_work_run+0x72/0x90 : [ 5195.411246] [<ffffffff81077139>] exit_to_usermode_loop+0x91/0xc2 : [ 5195.411494] [<ffffffff81003a51>] prepare_exit_to_usermode+0x31/0x40 : [ 5195.411739] [<ffffffff815e56af>] retint_user+0x8/0x10 : : Decoding revealed that the PMD was a valid prot_numa PMD and the bad PMD : was a false detection. The bug does not trigger if automatic NUMA : balancing or transparent huge pages is disabled. : : The bug is due a race in change_pmd_range between a pmd_trans_huge and : pmd_nond_or_clear_bad check without any locks held. During the : pmd_trans_huge check, a parallel protection update under lock can have : cleared the PMD and filled it with a prot_numa entry between the transhuge : check and the pmd_none_or_clear_bad check. : : While this could be fixed with heavy locking, it's only necessary to make : a copy of the PMD on the stack during change_pmd_range and avoid races. A : new helper is created for this as the check if quite subtle and the : existing similar helpful is not suitable. This passed 154 hours of : testing (usually triggers between 20 minutes and 24 hours) without : detecting bad PMDs or corruption. A basic test of an autonuma-intensive : workload showed no significant change in behaviour. Although Mel withdrew the patch on the face of LKML comment https://lkml.org/lkml/2017/4/10/922 the race window aforementioned is still open, and we have reports of Linpack test reporting bad residuals after the bad PMD warning is observed. In addition to that, bad rss-counter and non-zero pgtables assertions are triggered on mm teardown for the task hitting the bad PMD. host kernel: mm/pgtable-generic.c:40: bad pmd 00000000b3152f68(8000000d2d2008e7) .... host kernel: BUG: Bad rss-counter state mm:00000000b583043d idx:1 val:512 host kernel: BUG: non-zero pgtables_bytes on freeing mm: 4096 The issue is observed on a v4.18-based distribution kernel, but the race window is expected to be applicable to mainline kernels, as well. [akpm@linux-foundation.org: fix comment typo, per Rafael] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rafael Aquini <aquini@redhat.com> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Link: http://lkml.kernel.org/r/20200216191800.22423-1-aquini@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-06Merge tag 'devprop-5.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fix from Rafael Wysocki: "Revert a problematic commit from the 5.3 development cycle (Brendan Higgins)" * tag 'devprop-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "software node: Simplify software_node_release() function"
2020-03-06Merge tag 'acpi-5.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI documentation fix from Rafael Wysocki: "Fix Sphinx format warinings in an ACPI fan document added recently (Randy Dunlap)" * tag 'acpi-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Documentation/admin-guide/acpi: fix fan_performance_states.rst warnings
2020-03-06Merge tag 'drm-fixes-2020-03-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly fixes round, looks like a few people woke up, got a bunch of fixes across the drivers. Bit bigger than I'd like but they all seem fine and hopefully it quiets down now. sun4i, kirin, mediatek and exynos on the ARM side. virtio-gpu and core have some mmap fixes, and there is a dma-buf leak. one ttm fence leak is also fixed. Otherwise it's mostly amdgpu and i915. One of the i915 fixes is for a very long latency I was seeing (using latencytop) running gnome-shell locally when using firefox and eating nearly all my RAM, it really helps with desktop responsiveness esp when firefox is chewing a lot. dma-buf: - fix memory leak core: - shmem object mmap fix. ttm: - Fix fence leak in ttm_buffer_object_transfer(). amdgpu: - Gfx reset fix for gfx9, 10 - Fix for gfx10 - DP MST fix - DCC fix - Renoir power fixes - Navi power fix i915: - Break up long lists of object reclaim with cond_resched() - PSR probe fix - TGL workarounds - Selftest return value fix - Drop timeline mutex while waiting for retirement - Wait for OA configuration completion before writes to OA buffer virtio: - Fix resource id creation race in virtio. - mmap fixes sun4i: - Fixes for sun4i VI layer format support. kirin: - kirin: Revert "Fix for hikey620 display offset problem" exynos: - fix a kernel oops problem in case that driver is loaded as module. - fix a regulator warning issue when I2C DDC adapter cannot be gathered. - print out an error message only in error case excepting -EPROBE_DEFER. mediatek: - overlay, cursor and gce fixes" ` * tag 'drm-fixes-2020-03-06' of git://anongit.freedesktop.org/drm/drm: (38 commits) drm/amdgpu/display: navi1x copy dcn watermark clock settings to smu resume from s3 (v2) drm/amd/powerplay: map mclk to fclk for COMBINATIONAL_BYPASS case drm/amd/powerplay: fix pre-check condition for setting clock range drm/amd/display: fix dcc swath size calculations on dcn1 drm/amd/display: Clear link settings on MST disable connector drm/amdgpu: disable 3D pipe 1 on Navi1x drm/amdgpu: clean wptr on wb when gpu recovery drm: kirin: Revert "Fix for hikey620 display offset problem" drm/i915/gt: Drop the timeline->mutex as we wait for retirement drm/i915/perf: Reintroduce wait on OA configuration completion drm/sun4i: Fix DE2 VI layer format support drm/sun4i: Add separate DE3 VI layer formats drm/sun4i: de2/de3: Remove unsupported VI layer formats drm/i915/selftests: Fix return in assert_mmap_offset() drm/i915: Protect i915_request_await_start from early waits drm/i915/tgl: Add Wa_1608008084 drm/i915/tgl: Add Wa_22010178259:tgl drm/i915: Program MBUS with rmw during initialization drm/i915/psr: Force PSR probe only after full initialization drm/i915/gem: Break up long lists of object reclaim ...
2020-03-06sched/core: Remove rq.hrtick_csd_pendingPeter Xu
Now smp_call_function_single_async() provides the protection that we'll return with -EBUSY if the csd object is still pending, then we don't need the rq.hrtick_csd_pending any more. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20191216213125.9536-4-peterx@redhat.com
2020-03-06MIPS: smp: Remove tick_broadcast_countPeter Xu
Now smp_call_function_single_async() provides the protection that we'll return with -EBUSY if the csd object is still pending, then we don't need the tick_broadcast_count counter any more. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20191216213125.9536-3-peterx@redhat.com
2020-03-06smp: Allow smp_call_function_single_async() to insert locked csdPeter Xu
Previously we will raise an warning if we want to insert a csd object which is with the LOCK flag set, and if it happens we'll also wait for the lock to be released. However, this operation does not match perfectly with how the function is named - the name with "_async" suffix hints that this function should not block, while we will. This patch changed this behavior by simply return -EBUSY instead of waiting, at the meantime we allow this operation to happen without warning the user to change this into a feature when the caller wants to "insert a csd object, if it's there, just wait for that one". This is pretty safe because in flush_smp_call_function_queue() for async csd objects (where csd->flags&SYNC is zero) we'll first do the unlock then we call the csd->func(). So if we see the csd->flags&LOCK is true in smp_call_function_single_async(), then it's guaranteed that csd->func() will be called after this smp_call_function_single_async() returns -EBUSY. Update the comment of the function too to refect this. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20191216213125.9536-2-peterx@redhat.com
2020-03-06sched/rt: Remove unnecessary push for unfit tasksQais Yousef
In task_woken_rt() and switched_to_rto() we try trigger push-pull if the task is unfit. But the logic is found lacking because if the task was the only one running on the CPU, then rt_rq is not in overloaded state and won't trigger a push. The necessity of this logic was under a debate as well, a summary of the discussion can be found in the following thread: https://lore.kernel.org/lkml/20200226160247.iqvdakiqbakk2llz@e107158-lin.cambridge.arm.com/ Remove the logic for now until a better approach is agreed upon. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Fixes: 804d402fb6f6 ("sched/rt: Make RT capacity-aware") Link: https://lkml.kernel.org/r/20200302132721.8353-6-qais.yousef@arm.com
2020-03-06sched/rt: Allow pulling unfitting taskQais Yousef
When implemented RT Capacity Awareness; the logic was done such that if a task was running on a fitting CPU, then it was sticky and we would try our best to keep it there. But as Steve suggested, to adhere to the strict priority rules of RT class; allow pulling an RT task to unfitting CPU to ensure it gets a chance to run ASAP. LINK: https://lore.kernel.org/lkml/20200203111451.0d1da58f@oasis.local.home/ Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Fixes: 804d402fb6f6 ("sched/rt: Make RT capacity-aware") Link: https://lkml.kernel.org/r/20200302132721.8353-5-qais.yousef@arm.com
2020-03-06sched/rt: Optimize cpupri_find() on non-heterogenous systemsQais Yousef
By introducing a new cpupri_find_fitness() function that takes the fitness_fn as an argument and only called when asym_system static key is enabled. cpupri_find() is now a wrapper function that calls cpupri_find_fitness() passing NULL as a fitness_fn, hence disabling the logic that handles fitness by default. LINK: https://lore.kernel.org/lkml/c0772fca-0a4b-c88d-fdf2-5715fcf8447b@arm.com/ Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Fixes: 804d402fb6f6 ("sched/rt: Make RT capacity-aware") Link: https://lkml.kernel.org/r/20200302132721.8353-4-qais.yousef@arm.com
2020-03-06sched/rt: Re-instate old behavior in select_task_rq_rt()Qais Yousef
When RT Capacity Aware support was added, the logic in select_task_rq_rt was modified to force a search for a fitting CPU if the task currently doesn't run on one. But if the search failed, and the search was only triggered to fulfill the fitness request; we could end up selecting a new CPU unnecessarily. Fix this and re-instate the original behavior by ensuring we bail out in that case. This behavior change only affected asymmetric systems that are using util_clamp to implement capacity aware. None asymmetric systems weren't affected. LINK: https://lore.kernel.org/lkml/20200218041620.GD28029@codeaurora.org/ Reported-by: Pavan Kondeti <pkondeti@codeaurora.org> Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Fixes: 804d402fb6f6 ("sched/rt: Make RT capacity-aware") Link: https://lkml.kernel.org/r/20200302132721.8353-3-qais.yousef@arm.com
2020-03-06sched/rt: cpupri_find: Implement fallback mechanism for !fit caseQais Yousef
When searching for the best lowest_mask with a fitness_fn passed, make sure we record the lowest_level that returns a valid lowest_mask so that we can use that as a fallback in case we fail to find a fitting CPU at all levels. The intention in the original patch was not to allow a down migration to unfitting CPU. But this missed the case where we are already running on unfitting one. With this change now RT tasks can still move between unfitting CPUs when they're already running on such CPU. And as Steve suggested; to adhere to the strict priority rules of RT, if a task is already running on a fitting CPU but due to priority it can't run on it, allow it to downmigrate to unfitting CPU so it can run. Reported-by: Pavan Kondeti <pkondeti@codeaurora.org> Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Fixes: 804d402fb6f6 ("sched/rt: Make RT capacity-aware") Link: https://lkml.kernel.org/r/20200302132721.8353-2-qais.yousef@arm.com Link: https://lore.kernel.org/lkml/20200203142712.a7yvlyo2y3le5cpn@e107158-lin/
2020-03-06sched/fair: Fix reordering of enqueue/dequeue_task_fair()Vincent Guittot
Even when a cgroup is throttled, the group se of a child cgroup can still be enqueued and its gse->on_rq stays true. When a task is enqueued on such child, we still have to update the load_avg and increase h_nr_running of the throttled cfs. Nevertheless, the 1st for_each_sched_entity() loop is skipped because of gse->on_rq == true and the 2nd loop because the cfs is throttled whereas we have to update both load_avg with the old h_nr_running and increase h_nr_running in such case. The same sequence can happen during dequeue when se moves to parent before breaking in the 1st loop. Note that the update of load_avg will effectively happen only once in order to sync up to the throttled time. Next call for updating load_avg will stop early because the clock stays unchanged. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Fixes: 6d4d22468dae ("sched/fair: Reorder enqueue/dequeue_task_fair path") Link: https://lkml.kernel.org/r/20200306084208.12583-1-vincent.guittot@linaro.org
2020-03-06sched/fair: Fix runnable_avg for throttled cfsVincent Guittot
When a cfs_rq is throttled, its group entity is dequeued and its running tasks are removed. We must update runnable_avg with the old h_nr_running and update group_se->runnable_weight with the new h_nr_running at each level of the hierarchy. Reviewed-by: Ben Segall <bsegall@google.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Fixes: 9f68395333ad ("sched/pelt: Add a new runnable average signal") Link: https://lkml.kernel.org/r/20200227154115.8332-1-vincent.guittot@linaro.org
2020-03-06sched/deadline: Make two functions staticYu Chen
Since commit 06a76fe08d4 ("sched/deadline: Move DL related code from sched/core.c to sched/deadline.c"), DL related code moved to deadline.c. Make the following two functions static since they're only used in deadline.c: dl_change_utilization() init_dl_rq_bw_ratio() Signed-off-by: Yu Chen <chen.yu@easystack.cn> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200228100329.16927-1-chen.yu@easystack.cn
2020-03-06arm64: defconfig: enable CONFIG_SCHED_SMTValentin Schneider
The (CFS) scheduler has some extra logic catering to systems with SMT, but that logic won't be compiled in unless the above config is set. Note that the SMT-centric codepaths are gated by the sched_smt_present static key, and the SMT sched_domains will only survive if the platform has SMT. As such, the only impact on !SMT platforms should be a slightly bigger kernel - no behavioural change. Distro kernels already enable it, which makes sense since there already are things like ThunderX2 out in the wild. Enable it for the defconfig. Some deltas =========== FWIW my ELF symbol table diff looks something like this: NAME BEFORE AFTER DELTA update_sd_lb_stats.constprop.135 0 1864 +1864 find_idlest_group.isra.115 0 1808 +1808 update_numa_stats.isra.121 0 628 +628 select_task_rq_fair 3236 3732 +496 compute_energy.isra.112 0 420 +420 score_nearby_nodes.part.120 0 380 +380 __update_idle_core 0 232 +232 nohz_balance_exit_idle.part.127 0 216 +216 sched_slice.isra.99 0 172 +172 update_load_avg.part.107 0 116 +116 wakeup_preempt_entity.isra.101 0 92 +92 sched_cpu_activate 340 396 +56 pick_next_task_idle 8 56 +48 sched_cpu_deactivate 252 292 +40 show_smt_active 44 80 +36 cpu_smt_mask 0 28 +28 set_next_task_idle 4 32 +28 task_numa_work 680 692 +12 cpu_smt_flags 0 8 +8 enqueue_task_fair 2608 2612 +4 wakeup_preempt_entity.isra.104 92 0 -92 update_load_avg 1028 932 -96 task_numa_migrate 1824 1728 -96 sched_slice.isra.102 172 0 -172 nohz_balance_exit_idle.part.130 216 0 -216 task_numa_find_cpu 2116 1868 -248 score_nearby_nodes.part.123 380 0 -380 compute_energy.isra.115 420 0 -420 update_numa_stats.isra.124 472 0 -472 find_idlest_group.isra.118 1808 0 -1808 update_sd_lb_stats.constprop.138 1864 0 -1864 ------------------------------------------------------------------ DELTA SUM +820 As for the sched_domains, this is on a hikey960: before: $ cat /proc/sys/kernel/sched_domain/cpu*/domain*/name | sort | uniq DIE MC after: $ cat /proc/sys/kernel/sched_domain/cpu*/domain*/name | sort | uniq DIE MC Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200227191433.31994-3-valentin.schneider@arm.com
2020-03-06sched/topology: Don't enable EAS on SMT systemsValentin Schneider
EAS already requires asymmetric CPU capacities to be enabled, and mixing this with SMT is an aberration, but better be safe than sorry. Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Acked-by: Quentin Perret <qperret@google.com> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200227191433.31994-2-valentin.schneider@arm.com
2020-03-06sched/numa: Acquire RCU lock for checking idle cores during NUMA balancingMel Gorman
Qian Cai reported the following bug: The linux-next commit ff7db0bf24db ("sched/numa: Prefer using an idle CPU as a migration target instead of comparing tasks") introduced a boot warning, [ 86.520534][ T1] WARNING: suspicious RCU usage [ 86.520540][ T1] 5.6.0-rc3-next-20200227 #7 Not tainted [ 86.520545][ T1] ----------------------------- [ 86.520551][ T1] kernel/sched/fair.c:5914 suspicious rcu_dereference_check() usage! [ 86.520555][ T1] [ 86.520555][ T1] other info that might help us debug this: [ 86.520555][ T1] [ 86.520561][ T1] [ 86.520561][ T1] rcu_scheduler_active = 2, debug_locks = 1 [ 86.520567][ T1] 1 lock held by systemd/1: [ 86.520571][ T1] #0: ffff8887f4b14848 (&mm->mmap_sem#2){++++}, at: do_page_fault+0x1d2/0x998 [ 86.520594][ T1] [ 86.520594][ T1] stack backtrace: [ 86.520602][ T1] CPU: 1 PID: 1 Comm: systemd Not tainted 5.6.0-rc3-next-20200227 #7 task_numa_migrate() checks for idle cores when updating NUMA-related statistics. This relies on reading a RCU-protected structure in test_idle_cores() via this call chain task_numa_migrate -> update_numa_stats -> numa_idle_core -> test_idle_cores While the locking could be fine-grained, it is more appropriate to acquire the RCU lock for the entire scan of the domain. This patch removes the warning triggered at boot time. Reported-by: Qian Cai <cai@lca.pw> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Fixes: ff7db0bf24db ("sched/numa: Prefer using an idle CPU as a migration target instead of comparing tasks") Link: https://lkml.kernel.org/r/20200227191804.GJ3818@techsingularity.net
2020-03-06sched/fair: Fix kernel build warning in test_idle_cores() for !SMT NUMAValentin Schneider
Building against the tip/sched/core as ff7db0bf24db ("sched/numa: Prefer using an idle CPU as a migration target instead of comparing tasks") with the arm64 defconfig (which doesn't have CONFIG_SCHED_SMT set) leads to: kernel/sched/fair.c:1525:20: warning: 'test_idle_cores' declared 'static' but never defined [-Wunused-function] static inline bool test_idle_cores(int cpu, bool def); ^~~~~~~~~~~~~~~ Rather than define it in its own CONFIG_SCHED_SMT #define island, bunch it up with test_idle_cores(). Reported-by: Anshuman Khandual <anshuman.khandual@arm.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> [mgorman@techsingularity.net: Edit changelog, minor style change] Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Fixes: ff7db0bf24db ("sched/numa: Prefer using an idle CPU as a migration target instead of comparing tasks") Link: https://lkml.kernel.org/r/20200303110258.1092-3-mgorman@techsingularity.net
2020-03-06sched/fair: Enable tuning of decay periodThara Gopinath
Thermal pressure follows pelt signals which means the decay period for thermal pressure is the default pelt decay period. Depending on SoC characteristics and thermal activity, it might be beneficial to decay thermal pressure slower, but still in-tune with the pelt signals. One way to achieve this is to provide a command line parameter to set a decay shift parameter to an integer between 0 and 10. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200222005213.3873-10-thara.gopinath@linaro.org
2020-03-06thermal/cpu-cooling: Update thermal pressure in case of a maximum frequency ↵Thara Gopinath
capping Thermal governors can request for a CPU's maximum supported frequency to be capped in case of an overheat event. This in turn means that the maximum capacity available for tasks to run on the particular CPU is reduced. Delta between the original maximum capacity and capped maximum capacity is known as thermal pressure. Enable cpufreq cooling device to update the thermal pressure in event of a capped maximum frequency. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200222005213.3873-9-thara.gopinath@linaro.org
2020-03-06sched/fair: Update cpu_capacity to reflect thermal pressureThara Gopinath
cpu_capacity initially reflects the maximum possible capacity of a CPU. Thermal pressure on a CPU means this maximum possible capacity is unavailable due to thermal events. This patch subtracts the average thermal pressure for a CPU from its maximum possible capacity so that cpu_capacity reflects the remaining maximum capacity. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200222005213.3873-8-thara.gopinath@linaro.org
2020-03-06sched/fair: Enable periodic update of average thermal pressureThara Gopinath
Introduce support in scheduler periodic tick and other CFS bookkeeping APIs to trigger the process of computing average thermal pressure for a CPU. Also consider avg_thermal.load_avg in others_have_blocked which allows for decay of pelt signals. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200222005213.3873-7-thara.gopinath@linaro.org
2020-03-06arm/topology: Populate arch_scale_thermal_pressure() for ARM platformsThara Gopinath
Hook up topology_get_thermal_pressure to arch_scale_thermal_pressure thus enabling scheduler to retrieve instantaneous thermal pressure of a CPU. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200222005213.3873-6-thara.gopinath@linaro.org
2020-03-06arm64/topology: Populate arch_scale_thermal_pressure() for arm64 platformsThara Gopinath
Hook up topology_get_thermal_pressure to arch_scale_thermal_pressure thus enabling scheduler to retrieve instantaneous thermal pressure of a CPU. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200222005213.3873-5-thara.gopinath@linaro.org
2020-03-06drivers/base/arch_topology: Add infrastructure to store and update ↵Thara Gopinath
instantaneous thermal pressure Add architecture specific APIs to update and track thermal pressure on a per CPU basis. A per CPU variable thermal_pressure is introduced to keep track of instantaneous per CPU thermal pressure. Thermal pressure is the delta between maximum capacity and capped capacity due to a thermal event. topology_get_thermal_pressure can be hooked into the scheduler specified arch_scale_thermal_pressure to retrieve instantaneous thermal pressure of a CPU. arch_set_thermal_pressure can be used to update the thermal pressure. Considering topology_get_thermal_pressure reads thermal_pressure and arch_set_thermal_pressure writes into thermal_pressure, one can argue for some sort of locking mechanism to avoid a stale value. But considering topology_get_thermal_pressure can be called from a system critical path like scheduler tick function, a locking mechanism is not ideal. This means that it is possible the thermal_pressure value used to calculate average thermal pressure for a CPU can be stale for up to 1 tick period. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200222005213.3873-4-thara.gopinath@linaro.org
2020-03-06sched/topology: Add callback to read per CPU thermal pressureThara Gopinath
Introduce the arch_scale_thermal_pressure() callback to retrieve per CPU thermal pressure. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200222005213.3873-3-thara.gopinath@linaro.org
2020-03-06sched/pelt: Add support to track thermal pressureThara Gopinath
Extrapolating on the existing framework to track rt/dl utilization using pelt signals, add a similar mechanism to track thermal pressure. The difference here from rt/dl utilization tracking is that, instead of tracking time spent by a CPU running a RT/DL task through util_avg, the average thermal pressure is tracked through load_avg. This is because thermal pressure signal is weighted time "delta" capacity unlike util_avg which is binary. "delta capacity" here means delta between the actual capacity of a CPU and the decreased capacity a CPU due to a thermal event. In order to track average thermal pressure, a new sched_avg variable avg_thermal is introduced. Function update_thermal_load_avg can be called to do the periodic bookkeeping (accumulate, decay and average) of the thermal pressure. Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200222005213.3873-2-thara.gopinath@linaro.org
2020-03-06sched/vtime: Prevent unstable evaluation of WARN(vtime->state)Chris Wilson
As the vtime is sampled under loose seqcount protection by kcpustat, the vtime fields may change as the code flows. Where logic dictates a field has a static value, use a READ_ONCE. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Fixes: 74722bb223d0 ("sched/vtime: Bring up complete kcpustat accessor") Link: https://lkml.kernel.org/r/20200123180849.28486-1-frederic@kernel.org
2020-03-06Merge branch 'linus' into sched/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-06tools: Fix off-by 1 relative directory includesIan Rogers
This is currently working due to extra include paths in the build. Committer testing: $ cd tools/include/uapi/asm/ Before this patch: $ ls -la ../../arch/x86/include/uapi/asm/errno.h ls: cannot access '../../arch/x86/include/uapi/asm/errno.h': No such file or directory $ After this patch; $ ls -la ../../../arch/x86/include/uapi/asm/errno.h -rw-rw-r--. 1 acme acme 31 Feb 20 12:42 ../../../arch/x86/include/uapi/asm/errno.h $ Check that that is still under tools/, i.e. hasn't escaped into the main kernel sources: $ cd ../../../arch/x86/include/uapi/asm/ $ pwd /home/acme/git/perf/tools/arch/x86/include/uapi/asm $ Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Igor Lubashev <ilubashe@akamai.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Li <liwei391@huawei.com> Link: http://lore.kernel.org/lkml/20200306071110.130202-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-06perf jevents: Fix leak of mapfile memoryJohn Garry
The memory for global pointer is never freed during normal program execution, so let's do that in the main function exit as a good programming practice. A stray blank line is also removed. Reported-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: James Clark <james.clark@arm.com> Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linuxarm@huawei.com Link: http://lore.kernel.org/lkml/1583406486-154841-2-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-21 19:47:42 +0000