| Age | Commit message (Collapse) | Author |
|---|
|
We use the completion of the last active breadcrumb to retire the
requests along a timeline. This is purely opportunistic as nothing
guarantees that any particular timeline is terminated by a breadcrumb;
except for parking the engine where we explicitly add a breadcrumb so
that we park quickly and do an explicit retire upon signaling to reduce
the latency dramatically (avoiding a retire worker roundtrip).
With scheduling, we anticipate retiring completed timelines as a matter
of course. Performing the same action from inside the breadcrumbs is
intended to provide similar functionality for legacy ringbuffer
submission.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-5-chris@chris-wilson.co.uk
|
|
Before we mark the virtual engine as no longer inflight, flush any
ongoing signaling that may be using the ce->signal_link along the
previous breadcrumbs. On switch to a new physical engine, that link will
be inserted into the new set of breadcrumbs, causing confusion to an
ongoing iterator.
This patch undoes a last minute mistake introduced into commit
bab0557c8dca ("drm/i915/gt: Remove virtual breadcrumb before transfer"),
whereby instead of unconditionally applying the flush, it was only
applied if the request itself was going to be reused.
v2: Generalise and cancel all remaining ce->signals
Fixes: bab0557c8dca ("drm/i915/gt: Remove virtual breadcrumb before transfer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-4-chris@chris-wilson.co.uk
|
|
In our tests where we measure the elapsed time on both the CPU and CS
using a udelay, our CS results match the udelay much more accurately
than the ktime (even when using ktime_get_fast_ns). With preemption
disabled, we can go one step lower than ktime and use local_clock.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2919
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-3-chris@chris-wilson.co.uk
|
|
If any of the perf tests run into 0 time, not only are we liable to
divide by zero, but the result would be highly questionable.
Nevertheless, let's not have a div-by-zero error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-2-chris@chris-wilson.co.uk
|
|
On error we unpin and free the wa_ctx.vma, but do not clear any of the
derived flags. During lrc_init, we look at the flags and attempt to
dereference the wa_ctx.vma if they are set. To protect the error path
where we try to limp along without the wa_ctx, make sure we clear those
flags!
Reported-by: Matt Roper <matthew.d.roper@intel.com>
Fixes: 604a8f6f1e33 ("drm/i915/lrc: Only enable per-context and per-bb buffers if set")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.15+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-1-chris@chris-wilson.co.uk
|
|
With external metadata device, flush requests are not passed down to the
data device.
Fix this by submitting the flush request in dm_integrity_flush_buffers. In
order to not degrade performance, we overlap the data device flush with
the metadata device flush.
Reported-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
There wasn't ever a real need to log an error in the kernel log for
ioctls issued with insufficient permissions. Simply return an error
and if an admin/user is sufficiently motivated they can enable DM's
dynamic debugging to see an explanation for why the ioctls were
disallowed.
Reported-by: Nir Soffer <nsoffer@redhat.com>
Fixes: e980f62353c6 ("dm: don't allow ioctls to targets that don't map to whole devices")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
As with the regular suspend paths, also disable the wakeref assertions
as we disable the driver during shutdown.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2899
Fixes: fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104203905.19248-1-chris@chris-wilson.co.uk
|
|
This fix bug 210921 where DRM_INFO floods log when hitting an unsupported ASIC in
amdgpu_device_asic_has_dc_support(). This info should be only called once.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210921
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
dc_allow_idle_optimizations() needs to be protected by
CONFIG_DRM_AMD_DC_DCN.
Fixes: 71338cb4a7c2 ("drm/amd/display: enable idle optimizations for linux (MALL stutter)")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch is to improve the fine grain tuning function for Renoir.
The fine grain tuning function uses the sysfs node -- pp_od_clk_voltage
to config gfxclk. Meanwhile, another sysfs
node -- power_dpm_force_perfomance_level also affects the gfx clk.
It will cause confusion when these two sysfs nodes works
together.
And the flag "od_enabled" is used to control the overdrive function for
dGPU, like navi10, navi14 and navi21.
APU like Renior or Vangogh uses this "od_enabled" to configure
the frequency range of gfx clock, but the max value of frequency
range will not be higher than the safe limit, it is not "overdrive".
So this patch adds two new flags -- "fine_grain_enabled" and
"fine_grain_started" to avoid this confusion, the flag will
make these two sysfs nodes work separately.
The flag "fine_grain_enabled" is set as "enabled" by default,
so the fine grain tuning function will be enabled by default.
But the flag "fine_grain_started" is set as "false" by default,
so the fine grain function will not take effect until it is set as
"true".
Only when power_dpm_force_perfomance_level is changed to
"manual" mode, the flag "fine_grain_started" will be set as "true",
and the fine grain tuning function will be started.
In other profile modes, including "auto", "high", "low", "profile_peak",
"profile_standard", "profile_min_sclk", "profile_min_mclk",
the flag "fine_grain_started" will be set as "false", and the od range of
fine grain tuning function will be restored default value.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This pacth is to add the parameters of power profiles for vangogh,
includeing "profile_peak", "profile_standard", "profile_min_sclk",
"profile_min_mclk".
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
psp GFX_CTRL_CMD_ID_CONSUME_CMD different for windows and linux,
according to psp, linux cmds are not correct.
v2: only correct GFX_CTRL_CMD_ID_CONSUME_CMD.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add check for SExSH clients in kfd interrupt handler.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
According to hw, after navi10,it runs in dfll mode, and should
read sclk from AverageGfxclkFrequency.
Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add one more 2k resolution which appears frequently in market.
Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking fixes from Jakub Kicinski:
"Slightly lighter pull request to get back into the Thursday cadence.
Current release - always broken:
- can: mcp251xfd: fix Tx/Rx ring buffer driver race conditions
- dsa: hellcreek: fix led_classdev build errors
Previous releases - regressions:
- ipv6: fib: flush exceptions when purging route to avoid netdev
reference leak
- ip_tunnels: fix pmtu check in nopmtudisc mode
- ip: always refragment ip defragmented packets to avoid MTU issues
when forwarding through tunnels, correct "packet too big" message
is prohibitively tricky to generate
- s390/qeth: fix locking for discipline setup / removal and during
recovery to prevent both deadlocks and races
- mlx5: Use port_num 1 instead of 0 when delete a RoCE address
Previous releases - always broken:
- cdc_ncm: correct overhead calculation in delayed_ndp_size to
prevent out of bound accesses with Huawei 909s-120 LTE module
- fix stmmac dwmac-sun8i suspend/resume:
- PHY being left powered off
- MAC syscon configuration being reset
- reference to the reset controller being improperly dropped
- qrtr: fix null-ptr-deref in qrtr_ns_remove
- can: tcan4x5x: fix bittiming const, use common bittiming from m_can
driver
- mlx5e: CT: Use per flow counter when CT flow accounting is enabled
- mlx5e: Fix SWP offsets when vlan inserted by driver
Misc:
- bpf: Fix a task_iter bug caused by a bpf -> net merge conflict
resolution
And the usual many fixes to various error paths"
* tag 'net-5.11-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbE
s390/qeth: fix L2 header access in qeth_l3_osa_features_check()
s390/qeth: fix locking for discipline setup / removal
s390/qeth: fix deadlock during recovery
selftests: fib_nexthops: Fix wrong mausezahn invocation
nexthop: Bounce NHA_GATEWAY in FDB nexthop groups
nexthop: Unlink nexthop group entry in error path
nexthop: Fix off-by-one error in error path
octeontx2-af: fix memory leak of lmac and lmac->name
chtls: Fix chtls resources release sequence
chtls: Added a check to avoid NULL pointer dereference
chtls: Replace skb_dequeue with skb_peek
chtls: Avoid unnecessary freeing of oreq pointer
chtls: Fix panic when route to peer not configured
chtls: Remove invalid set_tcb call
chtls: Fix hardware tid leak
net: ip: always refragment ip defragmented packets
net: fix pmtu check in nopmtudisc mode
selftests: netfilter: add selftest for ipip pmtu discovery with enabled connection tracking
docs: octeontx2: tune rst markup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a functional bug in arm/chacha-neon as well as a potential
buffer overflow in ecdh"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ecdh - avoid buffer overflow in ecdh_set_secret()
crypto: arm/chacha-neon - add missing counter increment
|
|
Saving the regulatory domain while setting custom regulatory domain
was done while accessing a RCU protected pointer but without any
protection.
Fix this by using RTNL while accessing the pointer.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reported-by: syzbot+27771d4abcd9b7a1f5d3@syzkaller.appspotmail.com
Reported-by: syzbot+db4035751c56c0079282@syzkaller.appspotmail.com
Reported-by: Hans de Goede <hdegoede@redhat.com>
Fixes: beee24695157 ("cfg80211: Save the regulatory domain when setting custom regulatory")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210105165657.613e9a876829.Ia38d27dbebea28bf9c56d70691d243186ede70e7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
A stray @ caused the kernel-doc parser to not understand
this, fix that. Also add some missing kernel-doc.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 6bdb68cef7bf ("nl80211: add common API to configure SAR power limitations")
Fixes: c534e093d865 ("mac80211: add ieee80211_set_sar_specs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # build only
Link: https://lore.kernel.org/r/20210106234740.96827c18f9bd.I8b9f0a9cbfe186931ef9640046f414371f216914@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The kernel test robot reported a -5.8% performance regression on the
"poll2" test of will-it-scale, and bisected it to commit d55564cfc222
("x86: Make __put_user() generate an out-of-line call").
I didn't expect an out-of-line __put_user() to matter, because no normal
core code should use that non-checking legacy version of user access any
more. But I had overlooked the very odd poll() usage, which does a
__put_user() to update the 'revents' values of the poll array.
Now, Al Viro correctly points out that instead of updating just the
'revents' field, it would be much simpler to just copy the _whole_
pollfd entry, and then we could just use "copy_to_user()" on the whole
array of entries, the same way we use "copy_from_user()" a few lines
earlier to get the original values.
But that is not what we've traditionally done, and I worry that threaded
applications might be concurrently modifying the other fields of the
pollfd array. So while Al's suggestion is simpler - and perhaps worth
trying in the future - this instead keeps the "just update revents"
model.
To fix the performance regression, use the modern "unsafe_put_user()"
instead of __put_user(), with the proper "user_write_access_begin()"
guarding in place. This improves code generation enormously.
Link: https://lore.kernel.org/lkml/20210107134723.GA28532@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Laight <David.Laight@aculab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit 757055ae8dedf5333af17b3b5b4b70ba9bc9da4e.
The commit caused that ttynull was used as the default console
on several systems[1][2][3]. As a result, the console was
blank even when a better alternative existed.
It happened when there was no console configured
on the command line and ttynull_init() was the first initcall
calling register_console().
Or it happened when /dev/ did not exist when console_on_rootfs()
was called. It was not able to open /dev/console even though
a console driver was registered. It tried to add ttynull console
but it obviously did not help. But ttynull became the preferred
console and was used by /dev/console when it was available later.
The commit tried to fix a historical problem that have been there
for ages. The primary motivation was the commit 3cffa06aeef7ece30f6
("printk/console: Allow to disable console output by using console=""
or console=null"). It provided a clean solution for a workaround
that was widely used and worked only by chance.
This revert causes that the console="" or console=null command line
options will again work only by chance. These options will cause that
a particular console will be preferred and the default (tty) ones
will not get enabled. There will be no console registered at
all. As a result there won't be stdin, stdout, and stderr for
the init process. But it worked exactly this way even before.
The proper solution has to fulfill many conditions:
+ Register ttynull only when explicitly required or as
the ultimate fallback.
+ ttynull should get associated with /dev/console but it must
not become preferred console when used as a fallback.
Especially, it must still be possible to replace it
by a better console later.
Such a change requires clean up of the register_console() code.
Otherwise, it would be even harder to follow. Especially, the use
of has_preferred_console and CON_CONSDEV flag is tricky. The clean
up is risky. The ordering of consoles is not well defined. And
any changes tend to break existing user settings.
Do the revert at the least risky solution for now.
[1] https://lore.kernel.org/linux-kselftest/20201221144302.GR4077@smile.fi.intel.com/
[2] https://lore.kernel.org/lkml/d2a3b3c0-e548-7dd1-730f-59bc5c04e191@synopsys.com/
[3] https://patchwork.ozlabs.org/project/linux-um/patch/20210105120128.10854-1-thomas@m3y3r.de/
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Vineet Gupta <vgupta@synopsys.com>
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If CONFIG_OF is disabled, of_get_drm_display_mode is not compiled in,
and drivers using it fail to build:
ld: drivers/gpu/drm/imx/parallel-display.o: in function `imx_pd_connector_get_modes':
parallel-display.c:(.text+0x8d): undefined reference to `of_get_drm_display_mode'
Add an inline stub so they can be build-tested with non-OF
configurations.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
* acpi-scan:
ACPI: scan: add stub acpi_create_platform_device() for !CONFIG_ACPI
* acpi-misc:
ACPI: Update Kconfig help text for items that are no longer modular
|
|
We need a power_domain wakeref in pps_{lock,unlock} to prevent
a race while resetting pps state in intel_power_sequencer_reset().
intel_power_sequencer_reset() need a pps_mutex to access pps_pipe
but it can't grab pps_mutex due to deadlock with power_well
functions are called while holding pps_mutex.
intel_power_sequencer_reset() is called by power_well function
associated with legacy platforms like vlv and chv therefore re-use
the POWER_DOMAIN_DISPLAY_CORE power domain, which only used
by vlv and chv display power domain.
This will avoids the unnecessary noise of unrelated power wells
in pps_{lock,unlock}.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107112500.16216-1-anshuman.gupta@intel.com
|
|
Song reported a boot regression in a kvm image with 5.11-rc, and bisected
it down to the below patch. Debugging this issue, turns out that the boot
stalled when a task is waiting on a pipe being released. As we no longer
run task_work from get_signal() unless it's queued with TWA_SIGNAL, the
task goes idle without running the task_work. This prevents ->release()
from being called on the pipe, which another boot task is waiting on.
For now, re-instate the unconditional task_work run from get_signal().
For 5.12, we'll collapse TWA_RESUME and TWA_SIGNAL, as it no longer
makes sense to have a distinction between the two. This will turn
task_work notification into a simple boolean, whether to notify or not.
Fixes: 98b89b649fce ("signal: kill JOBCTL_TASK_WORK")
Reported-by: Song Liu <songliubraving@fb.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang version 11.0.1
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Battery status is being reported for the Elan touchscreen on ASUS
UX550 laptops despite not having a batter. It always shows either 0 or
1%.
Signed-off-by: Seth Miller <miller.seth@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
devm_platform_get_irqs_affinity()
The current check of nvec < minvec for nvec returned from
platform_irq_count() will not detect a negative error code in nvec.
This is because minvec is unsigned, and, as such, nvec is promoted to
unsigned in that check, which will make it a huge number (if it contained
-EPROBE_DEFER).
In practice, an error should not occur in nvec for the only in-tree
user, but add a check anyway.
Fixes: e15f2fa959f2 ("driver core: platform: Add devm_platform_get_irqs_affinity()")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1608561055-231244-1-git-send-email-john.garry@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 38d715f494f2 ("btrfs: use btrfs_start_delalloc_roots in
shrink_delalloc") cleaned up how we do delalloc shrinking by utilizing
some infrastructure we have in place to flush inodes that we use for
device replace and snapshot. However this introduced a pretty serious
performance regression. To reproduce the user untarred the source
tarball of Firefox (360MiB xz compressed/1.5GiB uncompressed), and would
see it take anywhere from 5 to 20 times as long to untar in 5.10
compared to 5.9. This was observed on fast devices (SSD and better) and
not on HDD.
The root cause is because before we would generally use the normal
writeback path to reclaim delalloc space, and for this we would provide
it with the number of pages we wanted to flush. The referenced commit
changed this to flush that many inodes, which drastically increased the
amount of space we were flushing in certain cases, which severely
affected performance.
We cannot revert this patch unfortunately because of 3d45f221ce62
("btrfs: fix deadlock when cloning inline extent and low on free
metadata space") which requires the ability to skip flushing inodes that
are being cloned in certain scenarios, which means we need to keep using
our flushing infrastructure or risk re-introducing the deadlock.
Instead to fix this problem we can go back to providing
btrfs_start_delalloc_roots with a number of pages to flush, and then set
up a writeback_control and utilize sync_inode() to handle the flushing
for us. This gives us the same behavior we had prior to the fix, while
still allowing us to avoid the deadlock that was fixed by Filipe. I
redid the users original test and got the following results on one of
our test machines (256GiB of ram, 56 cores, 2TiB Intel NVMe drive)
5.9 0m54.258s
5.10 1m26.212s
5.10+patch 0m38.800s
5.10+patch is significantly faster than plain 5.9 because of my patch
series "Change data reservations to use the ticketing infra" which
contained the patch that introduced the regression, but generally
improved the overall ENOSPC flushing mechanisms.
Additional testing on consumer-grade SSD (8GiB ram, 8 CPU) confirm
the results:
5.10.5 4m00s
5.10.5+patch 1m08s
5.11-rc2 5m14s
5.11-rc2+patch 1m30s
Reported-by: René Rebe <rene@exactcode.de>
Fixes: 38d715f494f2 ("btrfs: use btrfs_start_delalloc_roots in shrink_delalloc")
CC: stable@vger.kernel.org # 5.10
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: David Sterba <dsterba@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add my test results ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There will be memory leak if driver probe failed. Trace as below:
backtrace:
[<000000002415258f>] kmemleak_alloc+0x3c/0x50
[<00000000f447ebe4>] __kmalloc+0x208/0x530
[<0000000048bc7b3a>] of_dma_get_range+0xe4/0x1b0
[<0000000041e39065>] of_dma_configure_id+0x58/0x27c
[<000000006356866a>] platform_dma_configure+0x2c/0x40
......
[<000000000afcf9b5>] ret_from_fork+0x10/0x3c
This issue is introduced by commit e0d072782c73("dma-mapping:
introduce DMA range map, supplanting dma_pfn_offset "). It doesn't
free dma_range_map when driver probe failed and cause above
memory leak. So, add code to free it in error path.
Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset ")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Link: https://lore.kernel.org/r/20210105070927.14968-1-Meng.Li@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
hwmon, specifically hwmon_num_channel_attrs, expects the config
array in the hwmon_channel_info structure to be terminated by
a zero entry. amd_energy does not honor this convention. As
result, a KASAN warning is possible. Fix this by adding an
additional entry and setting it to zero.
Fixes: 8abee9566b7e ("hwmon: Add amd_energy driver to report energy counters")
Signed-off-by: David Arcari <darcari@redhat.com>
Cc: Naveen Krishna Chatradhi <nchatrad@amd.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: David Arcari <darcari@redhat.com>
Acked-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Link: https://lore.kernel.org/r/20210107144707.6927-1-darcari@redhat.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
dtc points out that the interrupts for some devices are not parsable:
picoxcell-pc3x2.dtsi:45.19-49.5: Warning (interrupts_property): /paxi/gem@30000: Missing interrupt-parent
picoxcell-pc3x2.dtsi:51.21-55.5: Warning (interrupts_property): /paxi/dmac@40000: Missing interrupt-parent
picoxcell-pc3x2.dtsi:57.21-61.5: Warning (interrupts_property): /paxi/dmac@50000: Missing interrupt-parent
picoxcell-pc3x2.dtsi:233.21-237.5: Warning (interrupts_property): /rwid-axi/axi2pico@c0000000: Missing interrupt-parent
There are two VIC instances, so it's not clear which one needs to be
used. I found the BSP sources that reference VIC0, so use that:
https://github.com/r1mikey/meta-picoxcell/blob/master/recipes-kernel/linux/linux-picochip-3.0/0001-picoxcell-support-for-Picochip-picoXcell-SoC.patch
Acked-by: Jamie Iles <jamie@jamieiles.com>
Link: https://lore.kernel.org/r/20201230152010.3914962-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Showing the hctx flags for when BLK_MQ_F_TAG_HCTX_SHARED is set gives
something like:
root@debian:/home/john# more /sys/kernel/debug/block/sda/hctx0/flags
alloc_policy=FIFO SHOULD_MERGE|TAG_QUEUE_SHARED|3
Add the decoding for that flag.
Fixes: 32bc15afed04b ("blk-mq: Facilitate a shared sbitmap per tagset")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We had kernel panic, it is caused by unload module and last
close confirmation.
call trace:
[1196029.743127] free_sess+0x15/0x50 [rtrs_client]
[1196029.743128] rtrs_clt_close+0x4c/0x70 [rtrs_client]
[1196029.743129] ? rnbd_clt_unmap_device+0x1b0/0x1b0 [rnbd_client]
[1196029.743130] close_rtrs+0x25/0x50 [rnbd_client]
[1196029.743131] rnbd_client_exit+0x93/0xb99 [rnbd_client]
[1196029.743132] __x64_sys_delete_module+0x190/0x260
And in the crashdump confirmation kworker is also running.
PID: 6943 TASK: ffff9e2ac8098000 CPU: 4 COMMAND: "kworker/4:2"
#0 [ffffb206cf337c30] __schedule at ffffffff9f93f891
#1 [ffffb206cf337cc8] schedule at ffffffff9f93fe98
#2 [ffffb206cf337cd0] schedule_timeout at ffffffff9f943938
#3 [ffffb206cf337d50] wait_for_completion at ffffffff9f9410a7
#4 [ffffb206cf337da0] __flush_work at ffffffff9f08ce0e
#5 [ffffb206cf337e20] rtrs_clt_close_conns at ffffffffc0d5f668 [rtrs_client]
#6 [ffffb206cf337e48] rtrs_clt_close at ffffffffc0d5f801 [rtrs_client]
#7 [ffffb206cf337e68] close_rtrs at ffffffffc0d26255 [rnbd_client]
#8 [ffffb206cf337e78] free_sess at ffffffffc0d262ad [rnbd_client]
#9 [ffffb206cf337e88] rnbd_clt_put_dev at ffffffffc0d266a7 [rnbd_client]
The problem is both code path try to close same session, which lead to
panic.
To fix it, just skip the sess if the refcount already drop to 0.
Fixes: f7a7a5c228d4 ("block/rnbd: client: main functionality")
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Adding name to the Contributors List
Signed-off-by: Swapnil Ingle <ingleswapnil@gmail.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Acked-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since dynamically allocate sglist is used for rnbd_iu, we can't free sg
table after send_usr_msg since the callback function (cqe.done) could
still access the sglist.
Otherwise KASAN reports UAF issue:
[ 4856.600257] BUG: KASAN: use-after-free in dma_direct_unmap_sg+0x53/0x290
[ 4856.600772] Read of size 4 at addr ffff888206af3a98 by task swapper/1/0
[ 4856.601729] CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G W 5.10.0-pserver #5.10.0-1+feature+linux+next+20201214.1025+0910d71
[ 4856.601748] Hardware name: Supermicro Super Server/X11DDW-L, BIOS 3.3 02/21/2020
[ 4856.601766] Call Trace:
[ 4856.601785] <IRQ>
[ 4856.601822] dump_stack+0x99/0xcb
[ 4856.601856] ? dma_direct_unmap_sg+0x53/0x290
[ 4856.601888] print_address_description.constprop.7+0x1e/0x230
[ 4856.601913] ? freeze_kernel_threads+0x73/0x73
[ 4856.601965] ? mark_held_locks+0x29/0xa0
[ 4856.602019] ? dma_direct_unmap_sg+0x53/0x290
[ 4856.602039] ? dma_direct_unmap_sg+0x53/0x290
[ 4856.602079] kasan_report.cold.9+0x37/0x7c
[ 4856.602188] ? mlx5_ib_post_recv+0x430/0x520 [mlx5_ib]
[ 4856.602209] ? dma_direct_unmap_sg+0x53/0x290
[ 4856.602256] dma_direct_unmap_sg+0x53/0x290
[ 4856.602366] complete_rdma_req+0x188/0x4b0 [rtrs_client]
[ 4856.602451] ? rtrs_clt_close+0x80/0x80 [rtrs_client]
[ 4856.602535] ? mlx5_ib_poll_cq+0x48b/0x16e0 [mlx5_ib]
[ 4856.602589] ? radix_tree_insert+0x3a0/0x3a0
[ 4856.602610] ? do_raw_spin_lock+0x119/0x1d0
[ 4856.602647] ? rwlock_bug.part.1+0x60/0x60
[ 4856.602740] rtrs_clt_rdma_done+0x3f7/0x670 [rtrs_client]
[ 4856.602804] ? rtrs_clt_rdma_cm_handler+0xda0/0xda0 [rtrs_client]
[ 4856.602857] ? check_flags.part.31+0x6c/0x1f0
[ 4856.602927] ? rcu_read_lock_sched_held+0xaf/0xe0
[ 4856.602963] ? rcu_read_lock_bh_held+0xc0/0xc0
[ 4856.603137] __ib_process_cq+0x10a/0x350 [ib_core]
[ 4856.603309] ib_poll_handler+0x41/0x1c0 [ib_core]
[ 4856.603358] irq_poll_softirq+0xe6/0x280
[ 4856.603392] ? lockdep_hardirqs_on_prepare+0x111/0x210
[ 4856.603446] __do_softirq+0x10d/0x646
[ 4856.603540] asm_call_irq_on_stack+0x12/0x20
[ 4856.603563] </IRQ>
[ 4856.605096] Allocated by task 8914:
[ 4856.605510] kasan_save_stack+0x19/0x40
[ 4856.605532] __kasan_kmalloc.constprop.7+0xc1/0xd0
[ 4856.605552] __kmalloc+0x155/0x320
[ 4856.605574] __sg_alloc_table+0x155/0x1c0
[ 4856.605594] sg_alloc_table+0x1f/0x50
[ 4856.605620] send_msg_sess_info+0x119/0x2e0 [rnbd_client]
[ 4856.605646] remap_devs+0x71/0x210 [rnbd_client]
[ 4856.605676] init_sess+0xad8/0xe10 [rtrs_client]
[ 4856.605706] rtrs_clt_reconnect_work+0xd6/0x170 [rtrs_client]
[ 4856.605728] process_one_work+0x521/0xa90
[ 4856.605748] worker_thread+0x65/0x5b0
[ 4856.605769] kthread+0x1f2/0x210
[ 4856.605789] ret_from_fork+0x22/0x30
[ 4856.606159] Freed by task 8914:
[ 4856.606559] kasan_save_stack+0x19/0x40
[ 4856.606580] kasan_set_track+0x1c/0x30
[ 4856.606601] kasan_set_free_info+0x1b/0x30
[ 4856.606622] __kasan_slab_free+0x108/0x150
[ 4856.606642] slab_free_freelist_hook+0x64/0x190
[ 4856.606661] kfree+0xe2/0x650
[ 4856.606681] __sg_free_table+0xa4/0x100
[ 4856.606707] send_msg_sess_info+0x1d6/0x2e0 [rnbd_client]
[ 4856.606733] remap_devs+0x71/0x210 [rnbd_client]
[ 4856.606763] init_sess+0xad8/0xe10 [rtrs_client]
[ 4856.606792] rtrs_clt_reconnect_work+0xd6/0x170 [rtrs_client]
[ 4856.606813] process_one_work+0x521/0xa90
[ 4856.606833] worker_thread+0x65/0x5b0
[ 4856.606853] kthread+0x1f2/0x210
[ 4856.606872] ret_from_fork+0x22/0x30
The solution is to free iu's sgtable after the iu is not used anymore.
And also move sg_alloc_table into rnbd_get_iu accordingly.
Fixes: 5a1328d0c3a7 ("block/rnbd-clt: Dynamically allocate sglist for rnbd_iu")
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
KASAN detect following BUG:
[ 778.215311] ==================================================================
[ 778.216696] BUG: KASAN: use-after-free in rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server]
[ 778.219037] Read of size 8 at addr ffff88b1d6516c28 by task tee/8842
[ 778.220500] CPU: 37 PID: 8842 Comm: tee Kdump: loaded Not tainted 5.10.0-pserver #5.10.0-1+feature+linux+next+20201214.1025+0910d71
[ 778.220529] Hardware name: Supermicro Super Server/X11DDW-L, BIOS 3.3 02/21/2020
[ 778.220555] Call Trace:
[ 778.220609] dump_stack+0x99/0xcb
[ 778.220667] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server]
[ 778.220715] print_address_description.constprop.7+0x1e/0x230
[ 778.220750] ? freeze_kernel_threads+0x73/0x73
[ 778.220896] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server]
[ 778.220932] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server]
[ 778.220994] kasan_report.cold.9+0x37/0x7c
[ 778.221066] ? kobject_put+0x80/0x270
[ 778.221102] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server]
[ 778.221184] rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server]
[ 778.221240] rnbd_srv_dev_session_force_close_store+0x6a/0xc0 [rnbd_server]
[ 778.221304] ? sysfs_file_ops+0x90/0x90
[ 778.221353] kernfs_fop_write+0x141/0x240
[ 778.221451] vfs_write+0x142/0x4d0
[ 778.221553] ksys_write+0xc0/0x160
[ 778.221602] ? __ia32_sys_read+0x50/0x50
[ 778.221684] ? lockdep_hardirqs_on_prepare+0x13d/0x210
[ 778.221718] ? syscall_enter_from_user_mode+0x1c/0x50
[ 778.221821] do_syscall_64+0x33/0x40
[ 778.221862] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 778.221896] RIP: 0033:0x7f4affdd9504
[ 778.221928] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 48 8d 05 f9 61 0d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53
[ 778.221956] RSP: 002b:00007fffebb36b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 778.222011] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f4affdd9504
[ 778.222038] RDX: 0000000000000002 RSI: 00007fffebb36c50 RDI: 0000000000000003
[ 778.222066] RBP: 00007fffebb36c50 R08: 0000556a151aa600 R09: 00007f4affeb1540
[ 778.222094] R10: fffffffffffffc19 R11: 0000000000000246 R12: 0000556a151aa520
[ 778.222121] R13: 0000000000000002 R14: 00007f4affea6760 R15: 0000000000000002
[ 778.222764] Allocated by task 3212:
[ 778.223285] kasan_save_stack+0x19/0x40
[ 778.223316] __kasan_kmalloc.constprop.7+0xc1/0xd0
[ 778.223347] kmem_cache_alloc_trace+0x186/0x350
[ 778.223382] rnbd_srv_rdma_ev+0xf16/0x1690 [rnbd_server]
[ 778.223422] process_io_req+0x4d1/0x670 [rtrs_server]
[ 778.223573] __ib_process_cq+0x10a/0x350 [ib_core]
[ 778.223709] ib_cq_poll_work+0x31/0xb0 [ib_core]
[ 778.223743] process_one_work+0x521/0xa90
[ 778.223773] worker_thread+0x65/0x5b0
[ 778.223802] kthread+0x1f2/0x210
[ 778.223833] ret_from_fork+0x22/0x30
[ 778.224296] Freed by task 8842:
[ 778.224800] kasan_save_stack+0x19/0x40
[ 778.224829] kasan_set_track+0x1c/0x30
[ 778.224860] kasan_set_free_info+0x1b/0x30
[ 778.224889] __kasan_slab_free+0x108/0x150
[ 778.224919] slab_free_freelist_hook+0x64/0x190
[ 778.224947] kfree+0xe2/0x650
[ 778.224982] rnbd_destroy_sess_dev+0x2fa/0x3b0 [rnbd_server]
[ 778.225011] kobject_put+0xda/0x270
[ 778.225046] rnbd_srv_sess_dev_force_close+0x30/0x60 [rnbd_server]
[ 778.225081] rnbd_srv_dev_session_force_close_store+0x6a/0xc0 [rnbd_server]
[ 778.225111] kernfs_fop_write+0x141/0x240
[ 778.225140] vfs_write+0x142/0x4d0
[ 778.225169] ksys_write+0xc0/0x160
[ 778.225198] do_syscall_64+0x33/0x40
[ 778.225227] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 778.226506] The buggy address belongs to the object at ffff88b1d6516c00
which belongs to the cache kmalloc-512 of size 512
[ 778.227464] The buggy address is located 40 bytes inside of
512-byte region [ffff88b1d6516c00, ffff88b1d6516e00)
The problem is in the sess_dev release function we call
rnbd_destroy_sess_dev, and could free the sess_dev already, but we still
set the keep_id in rnbd_srv_sess_dev_force_close, which lead to use
after free.
To fix it, move the keep_id before the sysfs removal, and cache the
rnbd_srv_session for lock accessing,
Fixes: 786998050cbc ("block/rnbd-srv: close a mapped device from server side.")
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
lkp reboot following build error:
drivers/block/rnbd/rnbd-clt.c: In function 'rnbd_softirq_done_fn':
>> drivers/block/rnbd/rnbd-clt.c:387:2: error: implicit declaration of function 'sg_free_table_chained' [-Werror=implicit-function-declaration]
387 | sg_free_table_chained(&iu->sgt, RNBD_INLINE_SG_CNT);
| ^~~~~~~~~~~~~~~~~~~~~
The reason is CONFIG_SG_POOL is not enabled in the config, to
avoid such failure, select SG_POOL in Kconfig for RNBD_CLIENT.
Fixes: 5a1328d0c3a7 ("block/rnbd-clt: Dynamically allocate sglist for rnbd_iu")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Tested. The device gets correctly exported to userspace and I can see
mouse and keyboard events.
Signed-off-by: Filipe Laíns <lains@archlinux.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Sound is broken on the DragonBoard 410c (apq8016_sbc) since 5.10:
hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_component_set_jack on hdmi-audio-codec.1.auto: -95
qcom-apq8016-sbc 7702000.sound: Failed to set jack: -95
ADV7533: ASoC: error at snd_soc_link_init on ADV7533: -95
hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_component_set_jack on hdmi-audio-codec.1.auto: -95
qcom-apq8016-sbc: probe of 7702000.sound failed with error -95
This happens because apq8016_sbc calls snd_soc_component_set_jack() on
all codec DAIs and attempts to ignore failures with return code -ENOTSUPP.
-ENOTSUPP is also excluded from error logging in soc_component_ret().
However, hdmi_codec_set_jack() returns -E*OP*NOTSUPP if jack detection
is not supported, which is not handled in apq8016_sbc and soc_component_ret().
Make it return -ENOTSUPP instead to fix sound and silence the errors.
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 55c5cc63ab32 ("ASoC: hdmi-codec: Use set_jack ops to set jack")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20210107165131.2535-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sync-up to not fall too much behind.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.11, take #1
- VM init cleanups
- PSCI relay cleanups
- Kill CONFIG_KVM_ARM_PMU
- Fixup __init annotations
- Fixup reg_to_encoding()
- Fix spurious PMCR_EL0 access
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* dma-buf: fix a use-after-free
* radeon: don't init the TTM page pool manually
* ttm: unexport ttm_pool_{init,fini}()
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/X/gnKs52t8xUuAlE@linux-uq9g
|
|
The syntax without dots is available since commit 43756e347f21
("scripts/kernel-doc: Add support for named variable macro arguments").
The same HTML output is produced with and without this patch.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210101211818.1023919-1-j.neuschaefer@gmx.net
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
A few misc fixes from Rob, mostly fallout from the locking rework that
landed in the merge window, plus a few smaller things.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtWMhzyD6kejmViZeZ+zfJxRvfq-R2t_zA+DcDiTxsYRQ@mail.gmail.com
|
|
Shakeel Butt reported in [1] that a user can request a task to be moved
to a resource group even if the task is already in the group. It just
wastes time to do the move operation which could be costly to send IPI
to a different CPU.
Add a sanity check to ensure that the move operation only happens when
the task is not already in the resource group.
[1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/
Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files")
Reported-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/962ede65d8e95be793cb61102cca37f7bb018e66.1608243147.git.reinette.chatre@intel.com
|
|
Currently, when moving a task to a resource group the PQR_ASSOC MSR is
updated with the new closid and rmid in an added task callback. If the
task is running, the work is run as soon as possible. If the task is not
running, the work is executed later in the kernel exit path when the
kernel returns to the task again.
Updating the PQR_ASSOC MSR as soon as possible on the CPU a moved task
is running is the right thing to do. Queueing work for a task that is
not running is unnecessary (the PQR_ASSOC MSR is already updated when
the task is scheduled in) and causing system resource waste with the way
in which it is implemented: Work to update the PQR_ASSOC register is
queued every time the user writes a task id to the "tasks" file, even if
the task already belongs to the resource group.
This could result in multiple pending work items associated with a
single task even if they are all identical and even though only a single
update with most recent values is needed. Specifically, even if a task
is moved between different resource groups while it is sleeping then it
is only the last move that is relevant but yet a work item is queued
during each move.
This unnecessary queueing of work items could result in significant
system resource waste, especially on tasks sleeping for a long time.
For example, as demonstrated by Shakeel Butt in [1] writing the same
task id to the "tasks" file can quickly consume significant memory. The
same problem (wasted system resources) occurs when moving a task between
different resource groups.
As pointed out by Valentin Schneider in [2] there is an additional issue
with the way in which the queueing of work is done in that the task_struct
update is currently done after the work is queued, resulting in a race with
the register update possibly done before the data needed by the update is
available.
To solve these issues, update the PQR_ASSOC MSR in a synchronous way
right after the new closid and rmid are ready during the task movement,
only if the task is running. If a moved task is not running nothing
is done since the PQR_ASSOC MSR will be updated next time the task is
scheduled. This is the same way used to update the register when tasks
are moved as part of resource group removal.
[1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/
[2] https://lore.kernel.org/lkml/20201123022433.17905-1-valentin.schneider@arm.com
[ bp: Massage commit message and drop the two update_task_closid_rmid()
variants. ]
Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files")
Reported-by: Shakeel Butt <shakeelb@google.com>
Reported-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/17aa2fb38fc12ce7bb710106b3e7c7b45acb9e94.1608243147.git.reinette.chatre@intel.com
|
|
The driver was converted to use the crypto engine helper
but is missing the corresponding Kconfig statement to ensure
it is available:
arm-linux-gnueabi-ld: drivers/crypto/omap-sham.o: in function `omap_sham_probe':
omap-sham.c:(.text+0x374): undefined reference to `crypto_engine_alloc_init'
arm-linux-gnueabi-ld: omap-sham.c:(.text+0x384): undefined reference to `crypto_engine_start'
arm-linux-gnueabi-ld: omap-sham.c:(.text+0x510): undefined reference to `crypto_engine_exit'
arm-linux-gnueabi-ld: drivers/crypto/omap-sham.o: in function `omap_sham_finish_req':
omap-sham.c:(.text+0x98c): undefined reference to `crypto_finalize_hash_request'
arm-linux-gnueabi-ld: omap-sham.c:(.text+0x9a0): undefined reference to `crypto_transfer_hash_request_to_engine'
arm-linux-gnueabi-ld: drivers/crypto/omap-sham.o: in function `omap_sham_update':
omap-sham.c:(.text+0xf24): undefined reference to `crypto_transfer_hash_request_to_engine'
arm-linux-gnueabi-ld: drivers/crypto/omap-sham.o: in function `omap_sham_final':
omap-sham.c:(.text+0x1020): undefined reference to `crypto_transfer_hash_request_to_engine'
Fixes: 133c3d434d91 ("crypto: omap-sham - convert to use crypto engine")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
crypto: Fix divide error in do_xor_speed()
From: Kirill Tkhai <ktkhai@virtuozzo.com>
Latest (but not only latest) linux-next panics with divide
error on my QEMU setup.
The patch at the bottom of this message fixes the problem.
xor: measuring software checksum speed
divide error: 0000 [#1] PREEMPT SMP KASAN
PREEMPT SMP KASAN
CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.10.0-next-20201223+ #2177
RIP: 0010:do_xor_speed+0xbb/0xf3
Code: 41 ff cc 75 b5 bf 01 00 00 00 e8 3d 23 8b fe 65 8b 05 f6 49 83 7d 85 c0 75 05 e8
84 70 81 fe b8 00 00 50 c3 31 d2 48 8d 7b 10 <f7> f5 41 89 c4 e8 58 07 a2 fe 44 89 63 10 48 8d 7b 08
e8 cb 07 a2
RSP: 0000:ffff888100137dc8 EFLAGS: 00010246
RAX: 00000000c3500000 RBX: ffffffff823f0160 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000808 RDI: ffffffff823f0170
RBP: 0000000000000000 R08: ffffffff8109c50f R09: ffffffff824bb6f7
R10: fffffbfff04976de R11: 0000000000000001 R12: 0000000000000000
R13: ffff888101997000 R14: ffff888101994000 R15: ffffffff823f0178
FS: 0000000000000000(0000) GS:ffff8881f7780000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000000220e000 CR4: 00000000000006a0
Call Trace:
calibrate_xor_blocks+0x13c/0x1c4
? do_xor_speed+0xf3/0xf3
do_one_initcall+0xc1/0x1b7
? start_kernel+0x373/0x373
? unpoison_range+0x3a/0x60
kernel_init_freeable+0x1dd/0x238
? rest_init+0xc6/0xc6
kernel_init+0x8/0x10a
ret_from_fork+0x1f/0x30
---[ end trace 5bd3c1d0b77772da ]---
Fixes: c055e3eae0f1 ("crypto: xor - use ktime for template benchmarking")
Cc: <stable@vger.kernel.org>
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
