| Age | Commit message (Collapse) | Author |
|---|
|
s5p duplicates the runtime selection of the timer register three times.
Move this out into a separate function.
FIXME: It is unclear whether this code needs to support true runtime
selection of the timer register, or whether it can be selected once at
init time.
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
On lookup we only want to read the inode item, so leave the path spinning. Also
we're just wholesale reading the leaf off, so map the leaf so we don't do a
bunch of kmap/kunmaps. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
If there are duplicate entries in the free space cache, discard the entire cache
and load it the old fashioned way. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
If we have a very large filesystem, we can spend a lot of time in
find_free_extent just trying to allocate from empty block groups. So instead
check to see if the block group even has enough space for the allocation, and if
not go on to the next block group.
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
Our readahead is sort of sloppy, and really isn't always needed. For example if
ls is doing a stating ls (which is the default) it's going to stat in non-disk
order, so if say you have a directory with a stupid amount of files, readahead
is going to do nothing but waste time in the case of doing the stat. Taking the
unconditional readahead out made my test go from 57 minutes to 36 minutes. This
means that everywhere we do loop through the tree we want to make sure we do set
path->reada properly, so I went through and found all of the places where we
loop through the path and set reada to 1. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
When the fs is super full and we unmount the fs, we could get stuck in this
thing where unmount is waiting for the caching kthread to make progress and the
caching kthread keeps scheduling because we're in the middle of a commit. So
instead just let the caching kthread keep going and only yeild if
need_resched(). This makes my horrible umount case go from taking up to 10
minutes to taking less than 20 seconds. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
Originally this was going to be used as a way to give hints to the allocator,
but frankly we can get much better hints elsewhere and it's not even used at all
for anything usefull. In addition to be completely useless, when we initialize
an inode we try and find a freeish block group to set as the inodes block group,
and with a completely full 40gb fs this takes _forever_, so I imagine with say
1tb fs this is just unbearable. So just axe the thing altoghether, we don't
need it and it saves us 8 bytes in the inode and saves us 500 microseconds per
inode lookup in my testcase. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
We have a bit of debugging in btrfs_search_slot to make sure the level of the
cow block is the same as the original block we were cow'ing. I don't think I've
ever seen this tripped, so kill it. This saves us 2 kmap's per level in our
search. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
If we have particularly full nodes, we could call btrfs_node_blockptr up to 32
times, which is 32 pairs of kmap/kunmap, which _sucks_. So go ahead and map the
extent buffer while we look for readahead targets. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
In count_range_bits we are adjusting total_bytes based on the range we are
searching for, but we don't adjust the range start according to the range we are
searching for, which makes for weird results. For example, if the range
[0-8192]
is set DELALLOC, but I search for 4096-8192, I will get back 4096 for the number
of bytes found, but the range_start will be 0, which makes it look like the
range is [0-4096]. So instead set range_start = max(cur_start, state->start).
This makes everything come out right. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
The ceph guys keep running into problems where we have space reserved in our
orphan block rsv when freeing it up. This is because they tend to do snapshots
alot, so their truncates tend to use a bunch of space, so when we go to do
things like update the inode we have to steal reservation space in order to make
the reservation happen. This happens because truncate can use as much space as
it freaking feels like, but we still have to hold space for removing the orphan
item and updating the inode, which will definitely always happen. So in order
to fix this we need to split all of the reservation stuf up. So with this patch
we have
1) The orphan block reserve which only holds the space for deleting our orphan
item when everything is over.
2) The truncate block reserve which gets allocated and used specifically for the
space that the truncate will use on a per truncate basis.
3) The transaction will always have 1 item's worth of data reserved so we can
update the inode normally.
Hopefully this will make the ceph problem go away. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
We use trans_mutex for lots of things, here's a basic list
1) To serialize trans_handles joining the currently running transaction
2) To make sure that no new trans handles are started while we are committing
3) To protect the dead_roots list and the transaction lists
Really the serializing trans_handles joining is not too hard, and can really get
bogged down in acquiring a reference to the transaction. So replace the
trans_mutex with a trans_lock spinlock and use it to do the following
1) Protect fs_info->running_transaction. All trans handles have to do is check
this, and then take a reference of the transaction and keep on going.
2) Protect the fs_info->trans_list. This doesn't get used too much, basically
it just holds the current transactions, which will usually just be the currently
committing transaction and the currently running transaction at most.
3) Protect the dead roots list. This is only ever processed by splicing the
list so this is relatively simple.
4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using
the trans_mutex before, so this is a pretty straightforward change.
5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over
the entirety of the commit we need to have a way to block new people from
creating a new transaction while we're doing our work. So we set no_trans_join
and in join_transaction we test to see if that is set, and if it is we do a
wait_on_commit.
6) Make the transaction use count atomic so we don't need to take locks to
modify it when we're dropping references.
7) Add a commit_lock to the transaction to make sure multiple people trying to
commit the same transaction don't race and commit at the same time.
8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl
trans.
I have tested this with xfstests, but obviously it is a pretty hairy change so
lots of testing is greatly appreciated. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
We currently track trans handles in current->journal_info, but we don't actually
use it. This patch fixes it. This will cover the case where we have multiple
people starting transactions down the call chain. This keeps us from having to
allocate a new handle and all of that, we just increase the use count of the
current handle, save the old block_rsv, and return. I tested this with xfstests
and it worked out fine. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
I keep forgetting that btrfs_join_transaction() just ignores the num_items
argument, which leads me to sending pointless patches and looking stupid :). So
just kill the num_items argument from btrfs_join_transaction and
btrfs_start_ioctl_transaction, since neither of them use it. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
In the prealloc filling code and compressed code we don't set trans->block_rsv
to the delalloc block reserve properly, which is going to make us use metadata
from the wrong pool, this patch fixes that. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
Conflicts:
mm/slub.c
|
|
Move the definition of DM64XX_VDD3P3V_PWDN from hardware.h
to devices.c since it is used only there.
This also helps rid hardware.h of platform private stuff.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
hwmon: (coretemp) Fix checkpatch errors
hwmon: Remove pkgtemp driver
hwmon: (coretemp) Merge pkgtemp with coretemp
hwmon: (pmbus) Add support for Analog Devices ADM1275
hwmon: (pmbus) Support for TI UCD90xxx series Sequencer and System Health Controllers
hwmon: (pmbus) Add support for TI UCD9200 series of PWM System Controllers
hwmon: (pmbus) Use device specific function to read fan configuration
hwmon: (pmbus) Expand scope of device specific get_status function
hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers
hwmon: Driver for MAX16065 System Manager and compatibles
hwmon: (sht15) add support for CRC validation
hwmon: (sht15) add support for the status register
hwmon: (sht15) clean-up the probe function
hwmon: (sht15) general code clean-up
hwmon: Add support for MAX6642
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf tools: Fix sample size bit operations
perf tools: Fix ommitted mmap data update on remap
watchdog: Change the default timeout and configure nmi watchdog period based on watchdog_thresh
watchdog: Disable watchdog when thresh is zero
watchdog: Only disable/enable watchdog if neccessary
watchdog: Fix rounding bug in get_sample_period()
perf tools: Propagate event parse error handling
perf tools: Robustify dynamic sample content fetch
perf tools: Pre-check sample size before parsing
perf tools: Move evlist sample helpers to evlist area
perf tools: Remove junk code in mmap size handling
perf tools: Check we are able to read the event size on mmap
|
|
ARM build fails with the following symptom:
CC arch/arm/kernel/asm-offsets.s
In file included from include/linux/seqlock.h:29,
from include/linux/time.h:8,
from include/linux/timex.h:56,
from include/linux/sched.h:57,
from arch/arm/kernel/asm-offsets.c:13:
include/linux/spinlock.h: In function 'spin_unlock_wait':
include/linux/spinlock.h:360: error: implicit declaration of function 'cpu_relax'
make[1]: *** [arch/arm/kernel/asm-offsets.s] Error 1
Fix it by including <asm/processor.h>.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
b43: fix comment typo reqest -> request
Haavard Skinnemoen has left Atmel
cris: typo in mach-fs Makefile
Kconfig: fix copy/paste-ism for dell-wmi-aio driver
doc: timers-howto: fix a typo ("unsgined")
perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
treewide: fix a few typos in comments
regulator: change debug statement be consistent with the style of the rest
Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
audit: acquire creds selectively to reduce atomic op overhead
rtlwifi: don't touch with treewide double semicolon removal
treewide: cleanup continuations and remove logging message whitespace
ath9k_hw: don't touch with treewide double semicolon removal
include/linux/leds-regulator.h: fix syntax in example code
tty: fix typo in descripton of tty_termios_encode_baud_rate
xtensa: remove obsolete BKL kernel option from defconfig
m68k: fix comment typo 'occcured'
arch:Kconfig.locks Remove unused config option.
treewide: remove extra semicolons
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (36 commits)
HID: hid-multitouch: cosmetic changes, sort classes and devices
HID: hid-multitouch: class MT_CLS_STANTUM is redundant with MT_CLS_CONFIDENCE
HID: hid-multitouch: add support for Unitec panels
HID: hid-multitouch: add support for Touch International panels
HID: hid-multitouch: add support for GoodTouch panels
HID: hid-multitouch: add support for CVTouch panels
HID: hid-multitouch: add support for ActionStar panels
HID: hiddev: fix race between hiddev_disconnect and hiddev_release
HID: magicmouse: ignore 'ivalid report id' while switching modes
HID: fix a crash in hid_report_raw_event() function.
HID: hid-multitouch: add support for Elo TouchSystems 2515 IntelliTouch Plus
HID: assorted usage updates from hut 1.12
HID: roccat: fix actual/startup profile sysfs attribute in koneplus
HID: hid-multitouch: Add support for Lumio panels
HID: 'name' and 'phys' in 'struct hid_device' can never be NULL
HID: hid-multitouch: add support for Ilitek dual-touch panel
HID: picolcd: Avoid compile warning/error triggered by copy_from_user()
HID: add support for Logitech G27 wheel
HID: hiddev: fix error path in hiddev_read when interrupted
HID: add support for Sony Navigation Controller
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm:
apm-emulation: apm_mutex breaks ACK; remove it
APM: take over maintainership
|
|
Commit e2a083dc0da9aa6437e14811198379b18cdfa7f8
"ARM: consolidate SMP cross call implementation" broke the ux500
compilation since the smp.h header declared a function called
from headsmp.S. This fixes it up by declaring it locally instead.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Rather than having each platform class provide a mach/smp.h header for
smp_cross_call(), arrange for them to register the function with the
core ARM SMP code instead.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (346 commits)
ASoC: core: Don't set "(null)" as a driver name
ALSA: hda - Use LPIB for ATI/AMD chipsets as default
Revert "ALSA: hda - Use position_fix=3 as default for AMD chipsets"
ASoC: Tegra: Fix compile when debugfs not enabled
ASoC: spdif-dit: Add missing MODULE_*
SOUND: OSS: Remove Au1550 driver.
ALSA: hda - add Intel Panther Point HDMI codec id
ALSA: emu10k1 - Add dB range to Bass and Treble for SB Live!
ALSA: hda - Remove PCM mixer elements from Virtual Master of realtek
ALSA: hda - Fix input-src parse in patch_analog.c
ASoC: davinci-mcasp: enable ping-pong SRAM buffers
ASoC: add iPAQ hx4700 machine driver
ASoC: Asahi Kasei AK4641 codec driver
ALSA: hda - Enable Realtek ALC269 codec input layer beep
ALSA: intel8x0m: enable AMD8111 modem
ALSA: HDA: Add jack detection for HDMI
ALSA: sound, core, pcm_lib: fix xrun_log
ASoC: Max98095: Move existing NULL check before pointer dereference.
ALSA: sound, core, pcm_lib: xrun_log: log also in_interrupt
ALSA: usb-audio - Add support for USB X-Fi S51 Pro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Eliminate various 'set but not used' warnings
x86, SMEP: Fix section mismatch warnings
x86, amd: Use _safe() msr access for GartTlbWlk disable code
|
|
02e352287a4 (block: rescan partitions on invalidated devices on
-ENOMEDIA too) relocated partition rescan above explicit bd_set_size()
to simplify condition check. As rescan_partitions() does its own bdev
size setting, this doesn't break anything; however,
rescan_partitions() prints out the following messages when adjusting
bdev size, which can be confusing.
sda: detected capacity change from 0 to 146815737856
sdb: detected capacity change from 0 to 146815737856
This patch restores the original order and remove the warning
messages.
stable: Please apply together with 02e352287a4 (block: rescan
partitions on invalidated devices on -ENOMEDIA too).
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Tony Luck <tony.luck@gmail.com>
Tested-by: Tony Luck <tony.luck@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As a result of c42321c (genirq: Make generic irq chip depend on
CONFIG_GENERIC_IRQ_CHIP), we now need those platforms using this in
my tree to select this symbol.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Allow processes blocked on plock requests to be interrupted
when they are killed. This leaves the problem of cleaning
up the lock state in userspace. This has three parts:
1. Add a flag to unlock operations sent to userspace
indicating the file is being closed. Userspace will
then look for and clear any waiting plock operations that
were abandoned by an interrupted process.
2. Queue an unlock-close operation (like in 1) to clean up
userspace from an interrupted plock request. This is needed
because the vfs will not send a cleanup-unlock if it sees no
locks on the file, which it won't if the interrupted operation
was the only one.
3. Do not use replies from userspace for unlock-close operations
because they are unnecessary (they are just cleaning up for the
process which did not make an unlock call). This also simplifies
the new unlock-close generated from point 2.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
* 'kvm-updates/2.6.40' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (131 commits)
KVM: MMU: Use ptep_user for cmpxchg_gpte()
KVM: Fix kvm mmu_notifier initialization order
KVM: Add documentation for KVM_CAP_NR_VCPUS
KVM: make guest mode entry to be rcu quiescent state
KVM: x86 emulator: Make jmp far emulation into a separate function
KVM: x86 emulator: Rename emulate_grpX() to em_grpX()
KVM: x86 emulator: Remove unused arg from emulate_pop()
KVM: x86 emulator: Remove unused arg from writeback()
KVM: x86 emulator: Remove unused arg from read_descriptor()
KVM: x86 emulator: Remove unused arg from seg_override()
KVM: Validate userspace_addr of memslot when registered
KVM: MMU: Clean up gpte reading with copy_from_user()
KVM: PPC: booke: add sregs support
KVM: PPC: booke: save/restore VRSAVE (a.k.a. USPRG0)
KVM: PPC: use ticks, not usecs, for exit timing
KVM: PPC: fix exit accounting for SPRs, tlbwe, tlbsx
KVM: PPC: e500: emulate SVR
KVM: VMX: Cache vmcs segment fields
KVM: x86 emulator: consolidate segment accessors
KVM: VMX: Avoid reading %rip unnecessarily when handling exceptions
...
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
bnx2x: allow device properly initialize after hotplug
bnx2x: fix DMAE timeout according to hw specifications
bnx2x: properly handle CFC DEL in cnic flow
bnx2x: call dev_kfree_skb_any instead of dev_kfree_skb
net: filter: move forward declarations to avoid compile warnings
pktgen: refactor pg_init() code
pktgen: use vzalloc_node() instead of vmalloc_node() + memset()
net: skb_trim explicitely check the linearity instead of data_len
ipv4: Give backtrace in ip_rt_bug().
net: avoid synchronize_rcu() in dev_deactivate_many
net: remove synchronize_net() from netdev_set_master()
rtnetlink: ignore NETDEV_RELEASE and NETDEV_JOIN event
net: rename NETDEV_BONDING_DESLAVE to NETDEV_RELEASE
bridge: call NETDEV_JOIN notifiers when add a slave
netpoll: disable netpoll when enslave a device
macvlan: Forward unicast frames in bridge mode to lowerdev
net: Remove linux/prefetch.h include from linux/skbuff.h
ipv4: Include linux/prefetch.h in fib_trie.c
netlabel: Remove prefetches from list handlers.
drivers/net: add prefetch header for prefetch users
...
Fixed up prefetch parts: removed a few duplicate prefetch.h includes,
fixed the location of the igb prefetch.h, took my version of the
skbuff.h code without the extra parentheses etc.
|
|
v6: typo fixes
v5: clarified that dtb should be aligned on a 64 bit boundary in RAM.
v3: added details to Documentation/arm/Booting
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
If a dtb is passed to the kernel then the kernel needs to iterate
through compiled-in mdescs looking for one that matches and move the
dtb data to a safe location before it gets accidentally overwritten by
the kernel.
This patch creates a new function, setup_machine_fdt() which is
analogous to the setup_machine_atags() created in the previous patch.
It does all the early setup needed to use a device tree machine
description.
v5: - Print warning with neither dtb nor atags are passed to the kernel
- Fix bug in setting of __machine_arch_type to the selected machine,
not just the last machine in the list.
Reported-by: Tixy <tixy@yxit.co.uk>
- Copy command line directly into boot_command_line instead of cmd_line
v4: - Dump some output when a matching machine_desc cannot be found
v3: - Added processing of reserved list.
- Backed out the v2 change that copied instead of reserved the
dtb. dtb is reserved again and the real problem was fixed by
using alloc_bootmem_align() for early allocation of RAM for
unflattening the tree.
- Moved cmd_line and initrd changes to earlier patch to make series
bisectable.
v2: Changed to save the dtb by copying into an allocated buffer.
- Since the dtb will very likely be passed in the first 16k of ram
where the interrupt vectors live, memblock_reserve() is
insufficient to protect the dtb data.
[based on work originally written by Jeremy Kerr <jeremy.kerr@canonical.com>]
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
In preparation for adding device tree support, this patch consolidates
all of the atag-specific setup into a single function.
v5: - drop double printk("Machine; %s\n", ...); call.
- leave copying boot_command_line in setup_arch() since it isn't
atags specific.
v4: - adapt to the removal of lookup_machine_type()
- break out dump of machine_desc table into dump_machine_table()
because the device tree probe code will use it.
- Add for_each_machine_desc() macro
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc
* 'exec_rm_compat' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc:
exec: document acct_arg_size()
exec: unify do_execve/compat_do_execve code
exec: introduce struct user_arg_ptr
exec: introduce get_user_arg_ptr() helper
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
GFS2: Wait properly when flushing the ail list
GFS2: Wipe directory hash table metadata when deallocating a directory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest:
ktest: Allow options to be used by other options
ktest: Create variables for the ktest config files
ktest: Reboot after each patchcheck run
ktest: Reboot to good kernel after every bisect run
ktest: If test failed due to timeout, print that
ktest: Fix post install command
|
|
Merge reason: this commit was queued up quite some time ago but was
forgotten about.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The current code relogs the entire inode every time during fsync log,
and it is much better suited to small files rather than large ones.
During my performance test, the fsync performace of large files sucks,
and we can ascribe this to the tremendous amount of csum infos of the
large ones, cause we have to flush all of these csum infos into log trees
even when there are only _one_ change in the whole file data. Apparently,
to optimize fsync, we need to create a filter to skip the unnecessary csum
ones, that is, the corresponding file data remains unchanged before this fsync.
Here I have some test results to show, I use sysbench to do "random write + fsync".
===
sysbench --test=fileio --num-threads=1 --file-num=2 --file-block-size=4K --file-total-size=8G --file-test-mode=rndwr --file-io-mode=sync --file-extra-flags= [prepare, run]
===
Sysbench args:
- Number of threads: 1
- Extra file open flags: 0
- 2 files, 4Gb each
- Block size 4Kb
- Number of random requests for random IO: 10000
- Read/Write ratio for combined random IO test: 1.50
- Periodic FSYNC enabled, calling fsync() each 100 requests.
- Calling fsync() at the end of test, Enabled.
- Using synchronous I/O mode
- Doing random write test
Sysbench results:
===
Operations performed: 0 Read, 10000 Write, 200 Other = 10200 Total
Read 0b Written 39.062Mb Total transferred 39.062Mb
===
a) without patch: (*SPEED* : 451.01Kb/sec)
112.75 Requests/sec executed
b) with patch: (*SPEED* : 4.7533Mb/sec)
1216.84 Requests/sec executed
PS: I've made a _sub transid_ stuff patch, but it does not perform as effectively as this patch,
and I'm wanderring where the problem is and trying to improve it more.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
The ordering of the clock bases is historical due to the
CLOCK_REALTIME and CLOCK_MONOTONIC constants. Now the hrtimer bases
have their own enumeration due to the gap between CLOCK_MONOTONIC and
CLOCK_BOOTTIME. So we can be more clever as most timers end up on the
CLOCK_MONOTONIC base due to the virtue of POSIX declaring that
relative CLOCK_REALTIME timers are not affected by time changes. In
desktop environments this is slowly changing as applications switch to
absolute timers, but I've observed empty CLOCK_REALTIME bases often
enough. There is no performance penalty or overhead when
CLOCK_REALTIME timers are active, but in case they are not we don't
skip over a full cache line.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
|
|
Instead of iterating over all possible timer bases avoid it by marking
the active bases in the cpu base.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
|
|
In the HIGHRES=y case we access the members at the end of struct
hrtimer_cpu_base first and then the one at the beginning. Move the
hrtimer data to front, so we have linear progressing access.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
|
|
Peter is concerned about the extra scan of CLOCK_REALTIME_COS in the
timer interrupt. Yes, I did not think about it, because the solution
was so elegant. I didn't like the extra list in timerfd when it was
proposed some time ago, but with a rcu based list the list walk it's
less horrible than the original global lock, which was held over the
list iteration.
Requested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
|
|
What we want is to count the number of bits in the mask,
not some other random operation written in the middle
of the night.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1306148788-6179-2-git-send-email-fweisbec@gmail.com
[ Fixed perf_event__names[] alignment which was nearby and hurting my eyes ... ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
02e352287a4 (block: rescan partitions on invalidated devices on
-ENOMEDIA too) relocated partition rescan above explicit bd_set_size()
to simplify condition check. As rescan_partitions() does its own bdev
size setting, this doesn't break anything; however,
rescan_partitions() prints out the following messages when adjusting
bdev size, which can be confusing.
sda: detected capacity change from 0 to 146815737856
sdb: detected capacity change from 0 to 146815737856
This patch restores the original order and remove the warning
messages.
stable: Please apply together with 02e352287a4 (block: rescan
partitions on invalidated devices on -ENOMEDIA too).
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Tony Luck <tony.luck@gmail.com>
Tested-by: Tony Luck <tony.luck@gmail.com>
Cc: stable@kernel.org
Stable note: 2.6.39 only.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
Commit eac9eacee16 "perf tools: Check we are able to read the event
size on mmap" brought a check to ensure we can read the size of the
event before dereferencing it, and do a remap otherwise to move the
buffer forward.
However that remap was ommitting all the necessary work to
update the new page offset, head, and to unmap previous pages,
etc...
To fix this, gather all the code that fetches the event in a
seperate helper which does all the necessary checks about the
header/event size and tells us anytime a remap is needed.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1306148788-6179-3-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
apm_mutex is locked by a process (e.g. apm -s) at the start of apm_ioctl() and
remains locked while pm_suspend() is called. Any subsequent process trying to
ACK the suspend (e.g. apmd) is then blocked at the start of apm_ioctl(),
causing the suspend to be delayed for 5 seconds in apm_suspend_notifier()
while the ACK times out. In short, ACKs don't work.
The driver's data structures are sufficiently protected by assorted locks. And
pm_suspend() has its own mutex to prevent reentrancy. Consequently there is no
obvious requirement for apm_mutex, which evolved from earlier BKL calls. So
let's remove it.
Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
for-linus
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arne/btrfs-unstable-arne into inode_numbers
Conflicts:
fs/btrfs/Makefile
fs/btrfs/ctree.h
fs/btrfs/volumes.h
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
