summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-13pinctrl: amd: Unify debounce handling into amd_pinconf_set()Mario Limonciello
Debounce handling is done in two different entry points in the driver. Unify this to make sure that it's always handled the same. Tested-by: Jan Visser <starquake@linuxeverywhere.org> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230705133005.577-5-mario.limonciello@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-07-13pinctrl: amd: Drop pull up select configurationMario Limonciello
pinctrl-amd currently tries to program bit 19 of all GPIOs to select either a 4kΩ or 8hΩ pull up, but this isn't what bit 19 does. Bit 19 is marked as reserved, even in the latest platforms documentation. Drop this programming functionality. Tested-by: Jan Visser <starquake@linuxeverywhere.org> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230705133005.577-4-mario.limonciello@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-07-13pinctrl: amd: Use amd_pinconf_set() for all config optionsMario Limonciello
On ASUS TUF A16 it is reported that the ITE5570 ACPI device connected to GPIO 7 is causing an interrupt storm. This issue doesn't happen on Windows. Comparing the GPIO register configuration between Windows and Linux bit 20 has been configured as a pull up on Windows, but not on Linux. Checking GPIO declaration from the firmware it is clear it *should* have been a pull up on Linux as well. ``` GpioInt (Level, ActiveLow, Exclusive, PullUp, 0x0000, "\\_SB.GPIO", 0x00, ResourceConsumer, ,) { // Pin list 0x0007 } ``` On Linux amd_gpio_set_config() is currently only used for programming the debounce. Actually the GPIO core calls it with all the arguments that are supported by a GPIO, pinctrl-amd just responds `-ENOTSUPP`. To solve this issue expand amd_gpio_set_config() to support the other arguments amd_pinconf_set() supports, namely `PIN_CONFIG_BIAS_PULL_DOWN`, `PIN_CONFIG_BIAS_PULL_UP`, and `PIN_CONFIG_DRIVE_STRENGTH`. Reported-by: Nik P <npliashechnikov@gmail.com> Reported-by: Nathan Schulte <nmschulte@gmail.com> Reported-by: Friedrich Vock <friedrich.vock@gmx.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217336 Reported-by: dridri85@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217493 Link: https://lore.kernel.org/linux-input/20230530154058.17594-1-friedrich.vock@gmx.de/ Tested-by: Jan Visser <starquake@linuxeverywhere.org> Fixes: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230705133005.577-3-mario.limonciello@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-07-13pinctrl: amd: Only use special debounce behavior for GPIO 0Mario Limonciello
It's uncommon to use debounce on any other pin, but technically we should only set debounce to 0 when working off GPIO0. Cc: stable@vger.kernel.org Tested-by: Jan Visser <starquake@linuxeverywhere.org> Fixes: 968ab9261627 ("pinctrl: amd: Detect internal GPIO0 debounce handling") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230705133005.577-2-mario.limonciello@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-07-12tracing: Stop FORTIFY_SOURCE complaining about stack trace callerSteven Rostedt (Google)
The stack_trace event is an event created by the tracing subsystem to store stack traces. It originally just contained a hard coded array of 8 words to hold the stack, and a "size" to know how many entries are there. This is exported to user space as: name: kernel_stack ID: 4 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:int size; offset:8; size:4; signed:1; field:unsigned long caller[8]; offset:16; size:64; signed:0; print fmt: "\t=> %ps\n\t=> %ps\n\t=> %ps\n" "\t=> %ps\n\t=> %ps\n\t=> %ps\n" "\t=> %ps\n\t=> %ps\n",i (void *)REC->caller[0], (void *)REC->caller[1], (void *)REC->caller[2], (void *)REC->caller[3], (void *)REC->caller[4], (void *)REC->caller[5], (void *)REC->caller[6], (void *)REC->caller[7] Where the user space tracers could parse the stack. The library was updated for this specific event to only look at the size, and not the array. But some older users still look at the array (note, the older code still checks to make sure the array fits inside the event that it read. That is, if only 4 words were saved, the parser would not read the fifth word because it will see that it was outside of the event size). This event was changed a while ago to be more dynamic, and would save a full stack even if it was greater than 8 words. It does this by simply allocating more ring buffer to hold the extra words. Then it copies in the stack via: memcpy(&entry->caller, fstack->calls, size); As the entry is struct stack_entry, that is created by a macro to both create the structure and export this to user space, it still had the caller field of entry defined as: unsigned long caller[8]. When the stack is greater than 8, the FORTIFY_SOURCE code notices that the amount being copied is greater than the source array and complains about it. It has no idea that the source is pointing to the ring buffer with the required allocation. To hide this from the FORTIFY_SOURCE logic, pointer arithmetic is used: ptr = ring_buffer_event_data(event); entry = ptr; ptr += offsetof(typeof(*entry), caller); memcpy(ptr, fstack->calls, size); Link: https://lore.kernel.org/all/20230612160748.4082850-1-svens@linux.ibm.com/ Link: https://lore.kernel.org/linux-trace-kernel/20230712105235.5fc441aa@gandalf.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Reported-by: Sven Schnelle <svens@linux.ibm.com> Tested-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-07-12ftrace: Fix possible warning on checking all pages used in ftrace_process_locs()Zheng Yejian
As comments in ftrace_process_locs(), there may be NULL pointers in mcount_loc section: > Some architecture linkers will pad between > the different mcount_loc sections of different > object files to satisfy alignments. > Skip any NULL pointers. After commit 20e5227e9f55 ("ftrace: allow NULL pointers in mcount_loc"), NULL pointers will be accounted when allocating ftrace pages but skipped before adding into ftrace pages, this may result in some pages not being used. Then after commit 706c81f87f84 ("ftrace: Remove extra helper functions"), warning may occur at: WARN_ON(pg->next); To fix it, only warn for case that no pointers skipped but pages not used up, then free those unused pages after releasing ftrace_lock. Link: https://lore.kernel.org/linux-trace-kernel/20230712060452.3175675-1-zhengyejian1@huawei.com Cc: stable@vger.kernel.org Fixes: 706c81f87f84 ("ftrace: Remove extra helper functions") Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-07-12drm/nouveau: bring back blit subchannel for pre nv50 GPUsKarol Herbst
1ba6113a90a0 removed a lot of the kernel GPU channel, but method 0x128 was important as otherwise the GPU spams us with `CACHE_ERROR` messages. We use the blit subchannel inside our vblank handling, so we should keep at least this part. v2: Only do it for NV11+ GPUs Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/201 Fixes: 4a16dd9d18a0 ("drm/nouveau/kms: switch to drm fbdev helpers") Signed-off-by: Karol Herbst <kherbst@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230526091052.2169044-1-kherbst@redhat.com
2023-07-12drm/nouveau/acr: Abort loading ACR if no firmware was foundKarol Herbst
This fixes a NULL pointer access inside nvkm_acr_oneinit in case necessary firmware files couldn't be loaded. Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/212 Fixes: 4b569ded09fd ("drm/nouveau/acr/ga102: initial support") Signed-off-by: Karol Herbst <kherbst@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230522201838.1496622-1-kherbst@redhat.com
2023-07-12KVM: arm64: Correctly handle page aging notifiers for unaligned memslotOliver Upton
Userspace is allowed to select any PAGE_SIZE aligned hva to back guest memory. This is even the case with hugepages, although it is a rather suboptimal configuration as PTE level mappings are used at stage-2. The arm64 page aging handlers have an assumption that the specified range is exactly one page/block of memory, which in the aforementioned case is not necessarily true. All together this leads to the WARN() in kvm_age_gfn() firing. However, the WARN is only part of the issue as the table walkers visit at most a single leaf PTE. For hugepage-backed memory in a memslot that isn't hugepage-aligned, page aging entirely misses accesses to the hugepage beyond the first page in the memslot. Add a new walker dedicated to handling page aging MMU notifiers capable of walking a range of PTEs. Convert kvm(_test)_age_gfn() over to the new walker and drop the WARN that caught the issue in the first place. The implementation of this walker was inspired by the test_clear_young() implementation by Yu Zhao [*], but repurposed to address a bug in the existing aging implementation. Cc: stable@vger.kernel.org # v5.15 Fixes: 056aad67f836 ("kvm: arm/arm64: Rework gpa callback handlers") Link: https://lore.kernel.org/kvmarm/20230526234435.662652-6-yuzhao@google.com/ Co-developed-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Yu Zhao <yuzhao@google.com> Reported-by: Reiji Watanabe <reijiw@google.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Shaoqin Huang <shahuang@redhat.com> Link: https://lore.kernel.org/r/20230627235405.4069823-1-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-07-12netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write()Dan Carpenter
The simple_write_to_buffer() function is designed to handle partial writes. It returns negatives on error, otherwise it returns the number of bytes that were able to be copied. This code doesn't check the return properly. We only know that the first byte is written, the rest of the buffer might be uninitialized. There is no need to use the simple_write_to_buffer() function. Partial writes are prohibited by the "if (*ppos != 0)" check at the start of the function. Just use memdup_user() and copy the whole buffer. Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/7c1f950b-3a7d-4252-82a6-876e53078ef7@moroto.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-12Merge tag 'platform-drivers-x86-v6.5-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Misc small fixes and hw-id additions" * tag 'platform-drivers-x86-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: touchscreen_dmi: Add info for the Archos 101 Cesium Educ tablet platform/x86: dell-ddv: Fix mangled list in documentation platform/x86: dell-ddv: Improve error handling platform/x86/amd: pmf: Add new ACPI ID AMDI0103 platform/x86/amd: pmc: Add new ACPI ID AMDI000A platform/x86/amd: pmc: Apply nvme quirk to HP 15s-eq2xxx platform/x86: Move s2idle quirk from thinkpad-acpi to amd-pmc platform/x86: int3472/discrete: set variable skl_int3472_regulator_second_sensor storage-class-specifier to static platform/x86/intel/tpmi: Prevent overflow for cap_offset platform/x86: wmi: Replace open coded guid_parse_and_compare() platform/x86: wmi: Break possible infinite loop when parsing GUID
2023-07-12perf parse-events: Avoid SEGV if PMU lookup fails for legacy cache termsIan Rogers
libfuzzer found the following command could SEGV: $ perf stat -e cpu/L2,L2/ true This is because the L2 term rewrites the perf_event_attr type to PERF_TYPE_HW_CACHE which then fails the PMU lookup for the second legacy cache term. The new failure is consistent with repeated hardware terms: $ perf stat -e cpu/L2,L2/ true event syntax error: 'cpu/L2,L2/' \___ Failed to find PMU for type 3 Initial error: event syntax error: 'cpu/L2,L2/' \___ Failed to find PMU for type 3 Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events $ perf stat -e cpu/cycles,cycles/ true event syntax error: 'cpu/cycles,cycles/' \___ Failed to find PMU for type 0 Initial error: event syntax error: 'cpu/cycles,cycles/' \___ Failed to find PMU for type 0 Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events Committer testing: Before: $ perf stat -e cpu/L2,L2/ true Segmentation fault (core dumped) $ After: $ perf stat -e cpu/L2,L2/ true event syntax error: 'cpu/L2,L2/' \___ Failed to find PMU for type 3 Initial error: event syntax error: 'cpu/L2,L2/' \___ Failed to find PMU for type 3 Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events $ Fixes: 6fd1e5191591f9d5 ("perf parse-events: Support PMUs for legacy cache events") Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Link: https://lore.kernel.org/r/20230712065250.1450306-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-07-12Merge tag 'probes-fixes-v6.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - Fix fprobe's rethook release issues: - Release rethook after ftrace_ops is unregistered so that the rethook is not accessed after free. - Stop rethook before ftrace_ops is unregistered so that the rethook is NOT used after exiting unregister_fprobe() - Fix eprobe cleanup logic. If it attaches to multiple events and failes to enable one of them, rollback all enabled events correctly. - Fix fprobe to unlock ftrace recursion lock correctly when it missed by another running kprobe. - Cleanup kprobe to remove unnecessary NULL. - Cleanup kprobe to remove unnecessary 0 initializations. * tag 'probes-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: fprobe: Ensure running fprobe_exit_handler() finished before calling rethook_free() kernel: kprobes: Remove unnecessary ‘0’ values kprobes: Remove unnecessary ‘NULL’ values from correct_ret_addr fprobe: add unlock to match a succeeded ftrace_test_recursion_trylock kernel/trace: Fix cleanup logic of enable_trace_eprobe fprobe: Release rethook after the ftrace_ops is unregistered
2023-07-12Merge tag 'for-linus-2023071101' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Benjamin Tissoires: - AMD SFH shift-out-of-bounds fix (Basavaraj Natikar) - avoid struct memcpy overrun warning in the hid-hyperv module (Arnd Bergmann) - a quick HID kselftests script fix for our CI to be happy (Benjamin Tissoires) - various fixes and additions of device IDs * tag 'for-linus-2023071101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: amd_sfh: Fix for shift-out-of-bounds HID: amd_sfh: Rename the float32 variable HID: input: fix mapping for camera access keys HID: logitech-hidpp: Add wired USB id for Logitech G502 Lightspeed HID: nvidia-shield: Pack inner/related declarations in HOSTCMD reports HID: hyperv: avoid struct memcpy overrun warning selftests: hid: fix vmtests.sh not running make headers
2023-07-12block/mq-deadline: Fix a bug in deadline_from_pos()Bart Van Assche
A bug was introduced in deadline_from_pos() while implementing the suggestion to use round_down() in the following code: pos -= bdev_offset_from_zone_start(rq->q->disk->part0, pos); This patch makes deadline_from_pos() use round_down() such that 'pos' is rounded down. Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Closes: https://lore.kernel.org/all/5zthzi3lppvcdp4nemum6qck4gpqbdhvgy4k3qwguhgzxc4quj@amulvgycq67h/ Cc: Christoph Hellwig <hch@lst.de> Cc: Damien Le Moal <dlemoal@kernel.org> Fixes: 0effb390c4ba ("block: mq-deadline: Handle requeued requests correctly") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230712173344.2994513-1-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-12RISC-V: Don't include Zicsr or Zifencei in I from ACPIPalmer Dabbelt
ACPI ISA strings are based on a specification after Zicsr and Zifencei were split out of I, so we shouldn't be treating them as part of I. We haven't release an ACPI-based kernel yet, so we don't need to worry about compatibility with the old ISA strings. Fixes: 07edc32779e3 ("RISC-V: always report presence of extensions formerly part of the base ISA") Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Link: https://lore.kernel.org/r/20230711224600.10879-1-palmer@rivosinc.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-12soundwire: qcom: update status correctly with maskSrinivas Kandagatla
SoundWire device status can be incorrectly updated without proper mask, fix this by adding a mask before updating the status. Fixes: c7d49c76d1d5 ("soundwire: qcom: add support to new interrupts") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230525133812.30841-2-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-12soundwire: fix enumeration completionJohan Hovold
The soundwire subsystem uses two completion structures that allow drivers to wait for soundwire device to become enumerated on the bus and initialised by their drivers, respectively. The code implementing the signalling is currently broken as it does not signal all current and future waiters and also uses the wrong reinitialisation function, which can potentially lead to memory corruption if there are still waiters on the queue. Not signalling future waiters specifically breaks sound card probe deferrals as codec drivers can not tell that the soundwire device is already attached when being reprobed. Some codec runtime PM implementations suffer from similar problems as waiting for enumeration during resume can also timeout despite the device already having been enumerated. Fixes: fb9469e54fa7 ("soundwire: bus: fix race condition with enumeration_complete signaling") Fixes: a90def068127 ("soundwire: bus: fix race condition with initialization_complete signaling") Cc: stable@vger.kernel.org # 5.7 Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230705123018.30903-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-12phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error codeAdrien Thierry
The return value from qcom_snps_hsphy_suspend/resume is not used. Make sure qcom_snps_hsphy_runtime_suspend/resume return this value as well. Signed-off-by: Adrien Thierry <athierry@redhat.com> Link: https://lore.kernel.org/r/20230629144542.14906-4-athierry@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-12phy: qcom-snps-femto-v2: properly enable ref clockAdrien Thierry
The driver is not enabling the ref clock, which thus gets disabled by the clk_disable_unused() initcall. This leads to the dwc3 controller failing to initialize if probed after clk_disable_unused() is called, for instance when the driver is built as a module. To fix this, switch to the clk_bulk API to handle both cfg_ahb and ref clocks at the proper places. Note that the cfg_ahb clock is currently not used by any device tree instantiation of the PHY. Work needs to be done separately to fix this. Link: https://lore.kernel.org/linux-arm-msm/ZEqvy+khHeTkC2hf@fedora/ Fixes: 51e8114f80d0 ("phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs") Signed-off-by: Adrien Thierry <athierry@redhat.com> Link: https://lore.kernel.org/r/20230629144542.14906-3-athierry@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-12phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspendAdrien Thierry
In the dwc3 core, both system and runtime suspend end up calling dwc3_suspend_common(). From there, what happens for the PHYs depends on the USB mode and whether the controller is entering system or runtime suspend. HOST mode: (1) system suspend on a non-wakeup-capable controller The [1] if branch is taken. dwc3_core_exit() is called, which ends up calling phy_power_off() and phy_exit(). Those two functions decrease the PM runtime count at some point, so they will trigger the PHY runtime sleep (assuming the count is right). (2) runtime suspend / system suspend on a wakeup-capable controller The [1] branch is not taken. dwc3_suspend_common() calls phy_pm_runtime_put_sync(). Assuming the ref count is right, the PHY runtime suspend op is called. DEVICE mode: dwc3_core_exit() is called on both runtime and system sleep unless the controller is already runtime suspended. OTG mode: (1) system suspend : dwc3_core_exit() is called (2) runtime suspend : do nothing In host mode, the code seems to make a distinction between 1) runtime sleep / system sleep for wakeup-capable controller, and 2) system sleep for non-wakeup-capable controller, where phy_power_off() and phy_exit() are only called for the latter. This suggests the PHY is not supposed to be in a fully powered-off state for runtime sleep and system sleep for wakeup-capable controller. Moreover, downstream, cfg_ahb_clk only gets disabled for system suspend. The clocks are disabled by phy->set_suspend() [2] which is only called in the system sleep path through dwc3_core_exit() [3]. With that in mind, don't disable the clocks during the femto PHY runtime suspend callback. The clocks will only be disabled during system suspend for non-wakeup-capable controllers, through dwc3_core_exit(). [1] https://elixir.bootlin.com/linux/v6.4/source/drivers/usb/dwc3/core.c#L1988 [2] https://git.codelinaro.org/clo/la/kernel/msm-5.4/-/blob/LV.AU.1.2.1.r2-05300-gen3meta.0/drivers/usb/phy/phy-msm-snps-hs.c#L524 [3] https://git.codelinaro.org/clo/la/kernel/msm-5.4/-/blob/LV.AU.1.2.1.r2-05300-gen3meta.0/drivers/usb/dwc3/core.c#L1915 Signed-off-by: Adrien Thierry <athierry@redhat.com> Link: https://lore.kernel.org/r/20230629144542.14906-2-athierry@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-12phy: mediatek: hdmi: mt8195: fix prediv bad upper limit testGuillaume Ranquet
The pll prediv calculus searchs for the smallest prediv that gets the ns_hdmipll_ck in the range of 5 GHz to 12 GHz. A typo in the upper bound test was testing for 5Ghz to 1Ghz Fixes: 45810d486bb44 ("phy: mediatek: add support for phy-mtk-hdmi-mt8195") Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230529-hdmi_phy_fix-v1-1-bf65f53af533@baylibre.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-12phy: phy-mtk-dp: Fix an error code in probe()Dan Carpenter
Negative -EINVAL was intended instead of positive EINVAL. Fixes: 6a23afad443a ("phy: phy-mtk-dp: Add driver for DP phy") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/3c699e00-2883-40d9-92c3-0da1dc38fdd4@moroto.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-12nvme: ensure disabling pairs with unquiesceKeith Busch
If any error handling that disables the controller fails to queue the reset work, like if the state changed to disconnected inbetween, then the failed teardown needs to unquiesce the queues since it's no longer paired with reset_work. Just make sure that the controller can be put into a resetting state prior to starting the disable so that no other handling can change the queue states while recovery is happening. Reported-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-07-12nvme-fc: fix race between error recovery and creating associationMichael Liang
There is a small race window between nvme-fc association creation and error recovery. Fix this race condition by protecting accessing to controller state and ASSOC_FAILED flag under nvme-fc controller lock. Signed-off-by: Michael Liang <mliang@purestorage.com> Reviewed-by: Caleb Sander <csander@purestorage.com> Reviewed-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-07-12nvme-fc: return non-zero status code when fails to create associationMichael Liang
Return non-zero status code(-EIO) when needed, so re-connecting or deleting controller will be triggered properly. Signed-off-by: Michael Liang <mliang@purestorage.com> Reviewed-by: Caleb Sander <csander@purestorage.com> Reviewed-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-07-12drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13Mario Limonciello
SMU13 overrides dynamic PCIe lane width and dynamic speed by when on certain hosts. commit 38e4ced80479 ("drm/amd/pm: conditionally disable pcie lane switching for some sienna_cichlid SKUs") worked around this issue by setting up certain SKUs to set up certain limits, but the same fundamental problem with those hosts affects all SMU11 implmentations as well, so align the SMU11 and SMU13 driver handling. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-07-12ring-buffer: Fix deadloop issue on reading trace_pipeZheng Yejian
Soft lockup occurs when reading file 'trace_pipe': watchdog: BUG: soft lockup - CPU#6 stuck for 22s! [cat:4488] [...] RIP: 0010:ring_buffer_empty_cpu+0xed/0x170 RSP: 0018:ffff88810dd6fc48 EFLAGS: 00000246 RAX: 0000000000000000 RBX: 0000000000000246 RCX: ffffffff93d1aaeb RDX: ffff88810a280040 RSI: 0000000000000008 RDI: ffff88811164b218 RBP: ffff88811164b218 R08: 0000000000000000 R09: ffff88815156600f R10: ffffed102a2acc01 R11: 0000000000000001 R12: 0000000051651901 R13: 0000000000000000 R14: ffff888115e49500 R15: 0000000000000000 [...] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8d853c2000 CR3: 000000010dcd8000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __find_next_entry+0x1a8/0x4b0 ? peek_next_entry+0x250/0x250 ? down_write+0xa5/0x120 ? down_write_killable+0x130/0x130 trace_find_next_entry_inc+0x3b/0x1d0 tracing_read_pipe+0x423/0xae0 ? tracing_splice_read_pipe+0xcb0/0xcb0 vfs_read+0x16b/0x490 ksys_read+0x105/0x210 ? __ia32_sys_pwrite64+0x200/0x200 ? switch_fpu_return+0x108/0x220 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x61/0xc6 Through the vmcore, I found it's because in tracing_read_pipe(), ring_buffer_empty_cpu() found some buffer is not empty but then it cannot read anything due to "rb_num_of_entries() == 0" always true, Then it infinitely loop the procedure due to user buffer not been filled, see following code path: tracing_read_pipe() { ... ... waitagain: tracing_wait_pipe() // 1. find non-empty buffer here trace_find_next_entry_inc() // 2. loop here try to find an entry __find_next_entry() ring_buffer_empty_cpu(); // 3. find non-empty buffer peek_next_entry() // 4. but peek always return NULL ring_buffer_peek() rb_buffer_peek() rb_get_reader_page() // 5. because rb_num_of_entries() == 0 always true here // then return NULL // 6. user buffer not been filled so goto 'waitgain' // and eventually leads to an deadloop in kernel!!! } By some analyzing, I found that when resetting ringbuffer, the 'entries' of its pages are not all cleared (see rb_reset_cpu()). Then when reducing the ringbuffer, and if some reduced pages exist dirty 'entries' data, they will be added into 'cpu_buffer->overrun' (see rb_remove_pages()), which cause wrong 'overrun' count and eventually cause the deadloop issue. To fix it, we need to clear every pages in rb_reset_cpu(). Link: https://lore.kernel.org/linux-trace-kernel/20230708225144.3785600-1-zhengyejian1@huawei.com Cc: stable@vger.kernel.org Fixes: a5fb833172eca ("ring-buffer: Fix uninitialized read_stamp") Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-07-12drm/amd: Move helper for dynamic speed switch check out of smu13Mario Limonciello
This helper is used for checking if the connected host supports the feature, it can be moved into generic code to be used by other smu implementations as well. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-07-12drm/amd/pm: conditionally disable pcie lane/speed switching for SMU13Mario Limonciello
Intel platforms such as Sapphire Rapids and Raptor Lake don't support dynamic pcie lane or speed switching. This limitation seems to carry over from one generation to another. To be safer, disable dynamic pcie lane width and speed switching when running on an Intel platform. Link: https://edc.intel.com/content/www/us/en/design/products/platforms/details/raptor-lake-s/13th-generation-core-processors-datasheet-volume-1-of-2/005/pci-express-support/ Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2663 Co-developed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-07-12drm/amd/pm: share the code around SMU13 pcie parameters updateEvan Quan
So that SMU13.0.0 and SMU13.0.7 do not need to have one copy each. Signed-off-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-07-12drm/amdgpu: avoid restore process run into dead loop.gaba
In restore process worker, pinned BO cause update PTE fail, then the function re-schedule the restore_work. This will generate dead loop. Signed-off-by: gaba <gaba@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-07-12drm/amd/pm: fix smu i2c data read riskYang Wang
the smu driver_table is used for all types of smu tables data transcation (e.g: PPtable, Metrics, i2c, Ecc..). it is necessary to hold this lock to avoiding data tampering during the i2c read operation. Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-07-12tracing: arm64: Avoid missing-prototype warningsArnd Bergmann
These are all tracing W=1 warnings in arm64 allmodconfig about missing prototypes: kernel/trace/trace_kprobe_selftest.c:7:5: error: no previous prototype for 'kprobe_trace_selftest_target' [-Werror=missing-pro totypes] kernel/trace/ftrace.c:329:5: error: no previous prototype for '__register_ftrace_function' [-Werror=missing-prototypes] kernel/trace/ftrace.c:372:5: error: no previous prototype for '__unregister_ftrace_function' [-Werror=missing-prototypes] kernel/trace/ftrace.c:4130:15: error: no previous prototype for 'arch_ftrace_match_adjust' [-Werror=missing-prototypes] kernel/trace/fgraph.c:243:15: error: no previous prototype for 'ftrace_return_to_handler' [-Werror=missing-prototypes] kernel/trace/fgraph.c:358:6: error: no previous prototype for 'ftrace_graph_sleep_time_control' [-Werror=missing-prototypes] arch/arm64/kernel/ftrace.c:460:6: error: no previous prototype for 'prepare_ftrace_return' [-Werror=missing-prototypes] arch/arm64/kernel/ptrace.c:2172:5: error: no previous prototype for 'syscall_trace_enter' [-Werror=missing-prototypes] arch/arm64/kernel/ptrace.c:2195:6: error: no previous prototype for 'syscall_trace_exit' [-Werror=missing-prototypes] Move the declarations to an appropriate header where they can be seen by the caller and callee, and make sure the headers are included where needed. Link: https://lore.kernel.org/linux-trace-kernel/20230517125215.930689-1-arnd@kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Florent Revest <revest@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [ Fixed ftrace_return_to_handler() to handle CONFIG_HAVE_FUNCTION_GRAPH_RETVAL case ] Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-07-12selftests/user_events: Test struct size match casesBeau Belgrave
The self tests for user_events currently does not ensure that the edge case for struct types work properly with size differences. Add cases for mis-matching struct names and sizes to ensure they work properly. Link: https://lkml.kernel.org/r/20230629235049.581-3-beaub@linux.microsoft.com Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-07-12nvme: fix parameter check in nvme_fault_inject_init()Minjie Du
Make IS_ERR() judge the debugfs_create_dir() function return. Signed-off-by: Minjie Du <duminjie@vivo.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-07-12nvme: warn only once for legacy uuid attributeKeith Busch
Report the legacy fallback behavior for uuid attributes just once instead of logging repeated warnings for the same condition every time the attribute is read. The old behavior is too spamy on the kernel logs. Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reported-by: Breno Leitao <leitao@debian.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-07-12drm/nouveau/disp/g94: enable HDMIKarol Herbst
Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Fixes: f530bc60a30b ("drm/nouveau/disp: move HDMI config into acquire + infoframe methods") Signed-off-by: Karol Herbst <kherbst@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230630160645.3984596-1-kherbst@redhat.com Signed-off-by: Karol Herbst <kherbst@redhat.com>
2023-07-12drm/nouveau/disp: fix HDMI on gt215+Karol Herbst
Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Fixes: f530bc60a30b ("drm/nouveau/disp: move HDMI config into acquire + infoframe methods") Signed-off-by: Karol Herbst <kherbst@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230628212248.3798605-1-kherbst@redhat.com Signed-off-by: Karol Herbst <kherbst@redhat.com>
2023-07-12kconfig: gconfig: correct program name in help textRandy Dunlap
Change "gkc" to "gconfig" in 3 places since it is called "gconfig" and not "gkc". Add a period at the end of one sentence. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-12kconfig: gconfig: drop the Show Debug Info help textRandy Dunlap
The Show Debug Info option was removed eons ago. Now finish the job by removing the help text for it also. Fixes: 7b5d87215b38 ("gconfig: remove show_debug option") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-12riscv: mm: fix truncation warning on RV32Jisheng Zhang
lkp reports below sparse warning when building for RV32: arch/riscv/mm/init.c:1204:48: sparse: warning: cast truncates bits from constant value (100000000 becomes 0) IMO, the reason we didn't see this truncates bug in real world is "0" means MEMBLOCK_ALLOC_ACCESSIBLE in memblock and there's no RV32 HW with more than 4GB memory. Fix it anyway to make sparse happy. Fixes: decf89f86ecd ("riscv: try to allocate crashkern region from 32bit addressible memory") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306080034.SLiCiOMn-lkp@intel.com/ Link: https://lore.kernel.org/r/20230709171036.1906-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-12perf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start()Eric Lin
Since commit 096b52fd2bb4 ("perf: RISC-V: throttle perf events") the perf_sample_event_took() function was added to report time spent in overflow interrupts. If the interrupt takes too long, the perf framework will lower the sysctl_perf_event_sample_rate and max_samples_per_tick. When hwc->interrupts is larger than max_samples_per_tick, the hwc->interrupts will be set to MAX_INTERRUPTS, and events will be throttled within the __perf_event_account_interrupt() function. However, the RISC-V PMU driver doesn't call riscv_pmu_stop() to update the PERF_HES_STOPPED flag after perf_event_overflow() in pmu_sbi_ovf_handler() function to avoid throttling. When the perf framework unthrottled the event in the timer interrupt handler, it triggers riscv_pmu_start() function and causes a WARN_ON_ONCE() warning, as shown below: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 240 at drivers/perf/riscv_pmu.c:184 riscv_pmu_start+0x7c/0x8e Modules linked in: CPU: 0 PID: 240 Comm: ls Not tainted 6.4-rc4-g19d0788e9ef2 #1 Hardware name: SiFive (DT) epc : riscv_pmu_start+0x7c/0x8e ra : riscv_pmu_start+0x28/0x8e epc : ffffffff80aef864 ra : ffffffff80aef810 sp : ffff8f80004db6f0 gp : ffffffff81c83750 tp : ffffaf80069f9bc0 t0 : ffff8f80004db6c0 t1 : 0000000000000000 t2 : 000000000000001f s0 : ffff8f80004db720 s1 : ffffaf8008ca1068 a0 : 0000ffffffffffff a1 : 0000000000000000 a2 : 0000000000000001 a3 : 0000000000000870 a4 : 0000000000000000 a5 : 0000000000000000 a6 : 0000000000000840 a7 : 0000000000000030 s2 : 0000000000000000 s3 : ffffaf8005165800 s4 : ffffaf800424da00 s5 : ffffffffffffffff s6 : ffffffff81cc7590 s7 : 0000000000000000 s8 : 0000000000000006 s9 : 0000000000000001 s10: ffffaf807efbc340 s11: ffffaf807efbbf00 t3 : ffffaf8006a16028 t4 : 00000000dbfbb796 t5 : 0000000700000000 t6 : ffffaf8005269870 status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [<ffffffff80aef864>] riscv_pmu_start+0x7c/0x8e [<ffffffff80185b56>] perf_adjust_freq_unthr_context+0x15e/0x174 [<ffffffff80188642>] perf_event_task_tick+0x88/0x9c [<ffffffff800626a8>] scheduler_tick+0xfe/0x27c [<ffffffff800b5640>] update_process_times+0x9a/0xba [<ffffffff800c5bd4>] tick_sched_handle+0x32/0x66 [<ffffffff800c5e0c>] tick_sched_timer+0x64/0xb0 [<ffffffff800b5e50>] __hrtimer_run_queues+0x156/0x2f4 [<ffffffff800b6bdc>] hrtimer_interrupt+0xe2/0x1fe [<ffffffff80acc9e8>] riscv_timer_interrupt+0x38/0x42 [<ffffffff80090a16>] handle_percpu_devid_irq+0x90/0x1d2 [<ffffffff8008a9f4>] generic_handle_domain_irq+0x28/0x36 After referring other PMU drivers like Arm, Loongarch, Csky, and Mips, they don't call *_pmu_stop() to update with PERF_HES_STOPPED flag after perf_event_overflow() function nor do they add PERF_HES_STOPPED flag checking in *_pmu_start() which don't cause this warning. Thus, it's recommended to remove this unnecessary check in riscv_pmu_start() function to prevent this warning. Signed-off-by: Eric Lin <eric.lin@sifive.com> Link: https://lore.kernel.org/r/20230710154328.19574-1-eric.lin@sifive.com Fixes: 096b52fd2bb4 ("perf: RISC-V: throttle perf events") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-12ksmbd: Fix unsigned expression compared with zeroWang Ming
The return value of the ksmbd_vfs_getcasexattr() is signed. However, the return value is being assigned to an unsigned variable and subsequently recasted, causing warnings. Use a signed type. Signed-off-by: Wang Ming <machel@vivo.com> Acked-by: Tom Talpey <tom@talpey.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-07-12RDMA/mlx4: Make check for invalid flags stricterDan Carpenter
This code is trying to ensure that only the flags specified in the list are allowed. The problem is that ucmd->rx_hash_fields_mask is a u64 and the flags are an enum which is treated as a u32 in this context. That means the test doesn't check whether the highest 32 bits are zero. Fixes: 4d02ebd9bbbd ("IB/mlx4: Fix RSS hash fields restrictions") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/233ed975-982d-422a-b498-410f71d8a101@moroto.mountain Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-07-12mailmap: add entry for Jonas GorskiJonas Gorski
The openwrt.org email address is long defunct, but still pop ups from time to time when asking get_maintainer.pl. So add an entry to my currently used address. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Link: https://lore.kernel.org/r/20230708195309.72767-2-jonas.gorski@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-12MAINTAINERS: add myself for spi-bcm63xxJonas Gorski
I noticed the driver is unclaimed. Since I was the last one doing substantial work on it, add me as the maintainer. As it is only found in legacy products, mark it as "Odd Fixes" instead of "Maintained". Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230708195309.72767-1-jonas.gorski@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-12spi: s3c64xx: clear loopback bit after loopback testJaewon Kim
When SPI loopback transfer is performed, S3C64XX_SPI_MODE_SELF_LOOPBACK bit still remained. It works as loopback even if the next transfer is not spi loopback mode. If not SPI_LOOP, needs to clear S3C64XX_SPI_MODE_SELF_LOOPBACK bit. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Fixes: ffb7bcd3b27e ("spi: s3c64xx: support loopback mode") Reviewed-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20230711082020.138165-1-jaewon02.kim@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-12regmap-irq: Fix out-of-bounds access when allocating config buffersIsaac J. Manjarres
When allocating the 2D array for handling IRQ type registers in regmap_add_irq_chip_fwnode(), the intent is to allocate a matrix with num_config_bases rows and num_config_regs columns. This is currently handled by allocating a buffer to hold a pointer for each row (i.e. num_config_bases). After that, the logic attempts to allocate the memory required to hold the register configuration for each row. However, instead of doing this allocation for each row (i.e. num_config_bases allocations), the logic erroneously does this allocation num_config_regs number of times. This scenario can lead to out-of-bounds accesses when num_config_regs is greater than num_config_bases. Fix this by updating the terminating condition of the loop that allocates the memory for holding the register configuration to allocate memory only for each row in the matrix. Amit Pundir reported a crash that was occurring on his db845c device due to memory corruption (see "Closes" tag for Amit's report). The KASAN report below helped narrow it down to this issue: [ 14.033877][ T1] ================================================================== [ 14.042507][ T1] BUG: KASAN: invalid-access in regmap_add_irq_chip_fwnode+0x594/0x1364 [ 14.050796][ T1] Write of size 8 at addr 06ffff8081021850 by task init/1 [ 14.242004][ T1] The buggy address belongs to the object at ffffff8081021850 [ 14.242004][ T1] which belongs to the cache kmalloc-8 of size 8 [ 14.255669][ T1] The buggy address is located 0 bytes inside of [ 14.255669][ T1] 8-byte region [ffffff8081021850, ffffff8081021858) Fixes: faa87ce9196d ("regmap-irq: Introduce config registers for irq types") Reported-by: Amit Pundir <amit.pundir@linaro.org> Closes: https://lore.kernel.org/all/CAMi1Hd04mu6JojT3y6wyN2YeVkPR5R3qnkKJ8iR8if_YByCn4w@mail.gmail.com/ Tested-by: John Stultz <jstultz@google.com> Tested-by: Amit Pundir <amit.pundir@linaro.org> # tested on Dragonboard 845c Cc: stable@vger.kernel.org # v6.0+ Cc: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Cc: Saravana Kannan <saravanak@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: "Isaac J. Manjarres" <isaacmanjarres@google.com> Link: https://lore.kernel.org/r/20230711193059.2480971-1-isaacmanjarres@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-12cpufreq: sparc: Don't mark cpufreq callbacks with __initViresh Kumar
These callbacks can be called again by the cpufreq core after the driver is initialized and must be kept around. We currently get section mismatch build warnings. Don't mark them with __init. Fixes: dcfce7c2cee4 ("cpufreq: sparc: Don't allocate cpufreq_driver dynamically") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-09-13 20:02:02 +0000