summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-15openvswitch: fix OOB access in reserve_sfa_size()Paolo Valerio
Given a sufficiently large number of actions, while copying and reserving memory for a new action of a new flow, if next_offset is greater than MAX_ACTIONS_BUFSIZE, the function reserve_sfa_size() does not return -EMSGSIZE as expected, but it allocates MAX_ACTIONS_BUFSIZE bytes increasing actions_len by req_size. This can then lead to an OOB write access, especially when further actions need to be copied. Fix it by rearranging the flow action size check. KASAN splat below: ================================================================== BUG: KASAN: slab-out-of-bounds in reserve_sfa_size+0x1ba/0x380 [openvswitch] Write of size 65360 at addr ffff888147e4001c by task handler15/836 CPU: 1 PID: 836 Comm: handler15 Not tainted 5.18.0-rc1+ #27 ... Call Trace: <TASK> dump_stack_lvl+0x45/0x5a print_report.cold+0x5e/0x5db ? __lock_text_start+0x8/0x8 ? reserve_sfa_size+0x1ba/0x380 [openvswitch] kasan_report+0xb5/0x130 ? reserve_sfa_size+0x1ba/0x380 [openvswitch] kasan_check_range+0xf5/0x1d0 memcpy+0x39/0x60 reserve_sfa_size+0x1ba/0x380 [openvswitch] __add_action+0x24/0x120 [openvswitch] ovs_nla_add_action+0xe/0x20 [openvswitch] ovs_ct_copy_action+0x29d/0x1130 [openvswitch] ? __kernel_text_address+0xe/0x30 ? unwind_get_return_address+0x56/0xa0 ? create_prof_cpu_mask+0x20/0x20 ? ovs_ct_verify+0xf0/0xf0 [openvswitch] ? prep_compound_page+0x198/0x2a0 ? __kasan_check_byte+0x10/0x40 ? kasan_unpoison+0x40/0x70 ? ksize+0x44/0x60 ? reserve_sfa_size+0x75/0x380 [openvswitch] __ovs_nla_copy_actions+0xc26/0x2070 [openvswitch] ? __zone_watermark_ok+0x420/0x420 ? validate_set.constprop.0+0xc90/0xc90 [openvswitch] ? __alloc_pages+0x1a9/0x3e0 ? __alloc_pages_slowpath.constprop.0+0x1da0/0x1da0 ? unwind_next_frame+0x991/0x1e40 ? __mod_node_page_state+0x99/0x120 ? __mod_lruvec_page_state+0x2e3/0x470 ? __kasan_kmalloc_large+0x90/0xe0 ovs_nla_copy_actions+0x1b4/0x2c0 [openvswitch] ovs_flow_cmd_new+0x3cd/0xb10 [openvswitch] ... Cc: stable@vger.kernel.org Fixes: f28cd2af22a0 ("openvswitch: fix flow actions reallocation") Signed-off-by: Paolo Valerio <pvalerio@redhat.com> Acked-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15ip6_gre: Fix skb_under_panic in __gre6_xmit()Peilin Ye
Feng reported an skb_under_panic BUG triggered by running test_ip6gretap() in tools/testing/selftests/bpf/test_tunnel.sh: [ 82.492551] skbuff: skb_under_panic: text:ffffffffb268bb8e len:403 put:12 head:ffff9997c5480000 data:ffff9997c547fff8 tail:0x18b end:0x2c0 dev:ip6gretap11 <...> [ 82.607380] Call Trace: [ 82.609389] <TASK> [ 82.611136] skb_push.cold.109+0x10/0x10 [ 82.614289] __gre6_xmit+0x41e/0x590 [ 82.617169] ip6gre_tunnel_xmit+0x344/0x3f0 [ 82.620526] dev_hard_start_xmit+0xf1/0x330 [ 82.623882] sch_direct_xmit+0xe4/0x250 [ 82.626961] __dev_queue_xmit+0x720/0xfe0 <...> [ 82.633431] packet_sendmsg+0x96a/0x1cb0 [ 82.636568] sock_sendmsg+0x30/0x40 <...> The following sequence of events caused the BUG: 1. During ip6gretap device initialization, tunnel->tun_hlen (e.g. 4) is calculated based on old flags (see ip6gre_calc_hlen()); 2. packet_snd() reserves header room for skb A, assuming tunnel->tun_hlen is 4; 3. Later (in clsact Qdisc), the eBPF program sets a new tunnel key for skb A using bpf_skb_set_tunnel_key() (see _ip6gretap_set_tunnel()); 4. __gre6_xmit() detects the new tunnel key, and recalculates "tun_hlen" (e.g. 12) based on new flags (e.g. TUNNEL_KEY and TUNNEL_SEQ); 5. gre_build_header() calls skb_push() with insufficient reserved header room, triggering the BUG. As sugguested by Cong, fix it by moving the call to skb_cow_head() after the recalculation of tun_hlen. Reproducer: OBJ=$LINUX/tools/testing/selftests/bpf/test_tunnel_kern.o ip netns add at_ns0 ip link add veth0 type veth peer name veth1 ip link set veth0 netns at_ns0 ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0 ip netns exec at_ns0 ip link set dev veth0 up ip link set dev veth1 up mtu 1500 ip addr add dev veth1 172.16.1.200/24 ip netns exec at_ns0 ip addr add ::11/96 dev veth0 ip netns exec at_ns0 ip link set dev veth0 up ip addr add dev veth1 ::22/96 ip link set dev veth1 up ip netns exec at_ns0 \ ip link add dev ip6gretap00 type ip6gretap seq flowlabel 0xbcdef key 2 \ local ::11 remote ::22 ip netns exec at_ns0 ip addr add dev ip6gretap00 10.1.1.100/24 ip netns exec at_ns0 ip addr add dev ip6gretap00 fc80::100/96 ip netns exec at_ns0 ip link set dev ip6gretap00 up ip link add dev ip6gretap11 type ip6gretap external ip addr add dev ip6gretap11 10.1.1.200/24 ip addr add dev ip6gretap11 fc80::200/24 ip link set dev ip6gretap11 up tc qdisc add dev ip6gretap11 clsact tc filter add dev ip6gretap11 egress bpf da obj $OBJ sec ip6gretap_set_tunnel tc filter add dev ip6gretap11 ingress bpf da obj $OBJ sec ip6gretap_get_tunnel ping6 -c 3 -w 10 -q ::11 Fixes: 6712abc168eb ("ip6_gre: add ip6 gre and gretap collect_md mode") Reported-by: Feng Zhou <zhoufeng.zf@bytedance.com> Co-developed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15ip6_gre: Avoid updating tunnel->tun_hlen in __gre6_xmit()Peilin Ye
Do not update tunnel->tun_hlen in data plane code. Use a local variable instead, just like "tunnel_hlen" in net/ipv4/ip_gre.c:gre_fb_xmit(). Co-developed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-04-14 This series contains updates to ice driver only. Maciej adjusts implementation in __ice_alloc_rx_bufs_zc() for when ice_fill_rx_descs() does not return the entire buffer request and fixes a return value for !CONFIG_NET_SWITCHDEV configuration which was preventing VF creation. Wojciech prevents eswitch transmit when VFs are being removed which was causing NULL pointer dereference. Jianglei Nie fixes a memory leak on error path of getting OROM data. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2022-04-14 1) Fix the output interface for VRF cases in xfrm_dst_lookup. From David Ahern. 2) Fix write out of bounds by doing COW on esp output when the packet size is larger than a page. From Sabrina Dubroca. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net/packet: fix packet_sock xmit return value checkingHangbin Liu
packet_sock xmit could be dev_queue_xmit, which also returns negative errors. So only checking positive errors is not enough, or userspace sendmsg may return success while packet is not send out. Move the net_xmit_errno() assignment in the braces as checkpatch.pl said do not use assignment in if condition. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net/smc: Fix sock leak when release after smc_shutdown()Tony Lu
Since commit e5d5aadcf3cd ("net/smc: fix sk_refcnt underflow on linkdown and fallback"), for a fallback connection, __smc_release() does not call sock_put() if its state is already SMC_CLOSED. When calling smc_shutdown() after falling back, its state is set to SMC_CLOSED but does not call sock_put(), so this patch calls it. Reported-and-tested-by: syzbot+6e29a053eb165bd50de5@syzkaller.appspotmail.com Fixes: e5d5aadcf3cd ("net/smc: fix sk_refcnt underflow on linkdown and fallback") Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15rxrpc: Restore removed timer deletionDavid Howells
A recent patch[1] from Eric Dumazet flipped the order in which the keepalive timer and the keepalive worker were cancelled in order to fix a syzbot reported issue[2]. Unfortunately, this enables the mirror image bug whereby the timer races with rxrpc_exit_net(), restarting the worker after it has been cancelled: CPU 1 CPU 2 =============== ===================== if (rxnet->live) <INTERRUPT> rxnet->live = false; cancel_work_sync(&rxnet->peer_keepalive_work); rxrpc_queue_work(&rxnet->peer_keepalive_work); del_timer_sync(&rxnet->peer_keepalive_timer); Fix this by restoring the removed del_timer_sync() so that we try to remove the timer twice. If the timer runs again, it should see ->live == false and not restart the worker. Fixes: 1946014ca3b1 ("rxrpc: fix a race in rxrpc_exit_net()") Signed-off-by: David Howells <dhowells@redhat.com> cc: Eric Dumazet <edumazet@google.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/20220404183439.3537837-1-eric.dumazet@gmail.com/ [1] Link: https://syzkaller.appspot.com/bug?extid=724378c4bb58f703b09a [2] Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net: phy: LAN937x: added PHY_POLL_CABLE_TEST flagArun Ramadoss
Added the phy_poll_cable_test flag for the lan937x phy driver. Tested using command - ethtool --cable-test <dev> Fixes: 680baca546f2 ("net: phy: added the LAN937x phy support") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15serial: 8250: Fix runtime PM for start_tx() for empty bufferTony Lindgren
Commit 932d596378b0 ("serial: 8250: Return early in .start_tx() if there are no chars to send") caused a regression where the drivers implementing runtime PM stopped idling. This is because serial8250_rpm_put_tx() is now unbalanced on early return, it normally gets called at __stop_tx(). Fixes: 932d596378b0 ("serial: 8250: Return early in .start_tx() if there are no chars to send") Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Johan Hovold <johan@kernel.org> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220411111657.16744-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15serial: imx: fix overrun interrupts in DMA modeJohan Hovold
Commit 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is off") accidentally enabled overrun interrupts unconditionally when deferring DMA enable until after the receiver has been enabled during startup. Fix this by using the DMA-initialised instead of DMA-enabled flag to determine whether overrun interrupts should be enabled. Note that overrun interrupts are already accounted for in imx_uart_clear_rx_errors() when using DMA since commit 41d98b5da92f ("serial: imx-serial - update RX error counters when DMA is used"). Fixes: 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is off") Cc: stable@vger.kernel.org # 4.17 Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220411081957.7846-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15serial: amba-pl011: do not time out prematurely when draining tx fifoLino Sanfilippo
The current timeout for draining the tx fifo in RS485 mode is calculated by multiplying the time it takes to transmit one character (with the given baud rate) with the maximal number of characters in the tx queue. This timeout is too short for two reasons: First when calculating the time to transmit one character integer division is used which may round down the result in case of a remainder of the division. Fix this by rounding up the division result. Second the hardware may need additional time (e.g for first putting the characters from the fifo into the shift register) before the characters are actually put onto the wire. To be on the safe side double the current maximum number of iterations that are used to wait for the queue draining. Fixes: 8d479237727c ("serial: amba-pl011: add RS485 support") Cc: stable@vger.kernel.org Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Link: https://lore.kernel.org/r/20220408233503.7251-1-LinoSanfilippo@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15ALSA: hda/hdmi: add HDMI codec VID for Raptorlake-PKai Vehmanen
Add HDMI codec VID for Intel Raptorlake-P platform. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20220414160129.3641411-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-04-15ALSA: hda/hdmi: fix warning about PCM count when used with SOFKai Vehmanen
With commit 13046370c4d1 ("ALSA: hda/hdmi: let new platforms assign the pcm slot dynamically"), old behaviour to consider the HDA pin number, when choosing PCM to assign, was dropped. Build on this change and limit the number of PCMs created to number of converters (= maximum number of concurrent display/receivers) when "mst_no_extra_pcms" and "dyn_pcm_no_legacy" quirks are both set. Fix the check in hdmi_find_pcm_slot() to ensure only spec->pcm_used entries are considered in the search. Elsewhere in the driver spec->pcm_used is already checked properly. Doing this avoids following warning at SOF driver probe for multiple machine drivers: [ 112.425297] sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 4 [ 112.425298] sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 5 [ 112.425299] sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 6 Fixes: 13046370c4d1 ("ALSA: hda/hdmi: let new platforms assign the pcm slot dynamically") BugLink: https://github.com/thesofproject/linux/issues/2573 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20220414150516.3638283-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-04-15sound/oss/dmasound: fix 'dmasound_setup' defined but not usedMiles Chen
We observed: 'dmasound_setup' defined but not used error with COMPILER=gcc ARCH=m68k DEFCONFIG=allmodconfig build. Fix it by adding __maybe_unused to dmasound_setup. Error(s): sound/oss/dmasound/dmasound_core.c:1431:12: error: 'dmasound_setup' defined but not used [-Werror=unused-function] Fixes: 9dd7c46346ca ("sound/oss/dmasound: fix build when drivers are mixed =y/=m") Signed-off-by: Miles Chen <miles.chen@mediatek.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220414091940.2216-1-miles.chen@mediatek.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-04-15tty: n_gsm: fix incorrect UA handlingDaniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.4.2 states that any received unnumbered acknowledgment (UA) with its poll/final (PF) bit set to 0 shall be discarded. Currently, all UA frame are handled in the same way regardless of the PF bit. This does not comply with the standard. Remove the UA case in gsm_queue() to process only UA frames with PF bit set to 1 to abide the standard. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-20-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix reset fifo race conditionDaniel Starke
gsmtty_write() and gsm_dlci_data_output() properly guard the fifo access. However, gsm_dlci_close() and gsmtty_flush_buffer() modifies the fifo but do not guard this. Add a guard here to prevent race conditions on parallel writes to the fifo. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-17-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix missing tty wakeup in convergence layer type 2Daniel Starke
gsm_control_modem() informs the virtual tty that more data can be written after receiving a control signal octet via modem status command (MSC). However, gsm_dlci_data() fails to do the same after receiving a control signal octet from the convergence layer type 2 header. Add tty_wakeup() in gsm_dlci_data() for convergence layer type 2 to fix this. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-14-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix wrong signal octets encoding in MSCDaniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. The value of the modem status command (MSC) frame contains an address field, control signal and optional break signal octet. The address field is encoded as described in chapter 5.2.1.2 with only one octet (may be extended to more in future versions of the standard). Whereas the control signal and break signal octet are always one byte each. This is strange at first glance as it makes the EA bit redundant. However, the same two octets are also encoded as header in convergence layer type 2 as described in chapter 5.5.2. No header length field is given and the only way to test if there is an optional break signal octet is via the EA flag which extends the control signal octet with a break signal octet. Now it becomes obvious how the EA bit for those two octets shall be encoded in the MSC frame. The current implementation treats the signal octet different for MSC frame and convergence layer type 2 header even though the standard describes it for both in the same way. Use the EA bit to encode the signal octets not only in the convergence layer type 2 header but also in the MSC frame in the same way with either 1 or 2 bytes in case of an optional break signal. Adjust the receiving path accordingly in gsm_control_modem(). Fixes: 3ac06b905655 ("tty: n_gsm: Fix for modems with brk in modem status control") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-13-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix wrong command frame length field encodingDaniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.6.1 states that each command frame shall be made up from type, length and value. Looking for example in chapter 5.4.6.3.5 at the description for the encoding of a flow control on command it becomes obvious, that the type and length field is always present whereas the value may be zero bytes long. The current implementation omits the length field if the value is not present. This is wrong. Correct this by always sending the length in gsm_control_transmit(). So far only the modem status command (MSC) has included a value and encoded its length directly. Therefore, also change gsmtty_modem_update(). Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-12-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix wrong command retry handlingDaniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.7.3 states that the valid range for the maximum number of retransmissions (N2) is from 0 to 255 (both including). gsm_config() fails to limit this range correctly. Furthermore, gsm_control_retransmit() handles this number incorrectly by performing N2 - 1 retransmission attempts. Setting N2 to zero results in more than 255 retransmission attempts. Fix the range check in gsm_config() and the value handling in gsm_control_send() and gsm_control_retransmit() to comply with 3GPP 27.010. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-11-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix missing explicit ldisc flushDaniel Starke
In gsm_cleanup_mux() the muxer is closed down and all queues are removed. However, removing the queues is done without explicit control of the underlying buffers. Flush those before freeing up our queues to ensure that all outgoing queues are cleared consistently. Otherwise, a new mux connection establishment attempt may time out while the underlying tty is still busy sending out the remaining data from the previous connection. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-10-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix wrong DLCI release orderDaniel Starke
The current DLCI release order starts with the control channel followed by the user channels. Reverse this order to keep the control channel open until all user channels have been released. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-9-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix insufficient txframe sizeDaniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.7.2 states that the maximum frame size (N1) refers to the length of the information field (i.e. user payload). However, 'txframe' stores the whole frame including frame header, checksum and start/end flags. We also need to consider the byte stuffing overhead. Define constant for the protocol overhead and adjust the 'txframe' size calculation accordingly to reserve enough space for a complete mux frame including byte stuffing for advanced option mode. Note that no byte stuffing is applied to the start and end flag. Also use MAX_MTU instead of MAX_MRU as this buffer is used for data transmission. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-8-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix malformed counter for out of frame dataDaniel Starke
The gsm_mux field 'malformed' represents the number of malformed frames received. However, gsm1_receive() also increases this counter for any out of frame byte. Fix this by ignoring out of frame data for the malformed counter. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-7-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix frame reception handlingDaniel Starke
The frame checksum (FCS) is currently handled in gsm_queue() after reception of a frame. However, this breaks layering. A workaround with 'received_fcs' was implemented so far. Furthermore, frames are handled as such even if no end flag was received. Move FCS calculation from gsm_queue() to gsm0_receive() and gsm1_receive(). Also delay gsm_queue() call there until a full frame was received to fix both points. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-6-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2Daniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.5.2 describes that the signal octet in convergence layer type 2 can be either one or two bytes. The length is encoded in the EA bit. This is set 1 for the last byte in the sequence. gsmtty_modem_update() handles this correctly but gsm_dlci_data_output() fails to set EA to 1. There is no case in which we encode two signal octets as there is no case in which we send out a break signal. Therefore, always set the EA bit to 1 for the signal octet to fix this. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-5-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix mux cleanup after unregister tty deviceDaniel Starke
Internally, we manage the alive state of the mux channels and mux itself with the field member 'dead'. This makes it possible to notify the user if the accessed underlying link is already gone. On the other hand, however, removing the virtual ttys before terminating the channels may result in peer messages being received without any internal target. Move the mux cleanup procedure from gsmld_detach_gsm() to gsmld_close() to fix this by keeping the virtual ttys open until the mux has been cleaned up. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-4-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix decoupled mux resourceDaniel Starke
The active mux instances are managed in the gsm_mux array and via mux_get() and mux_put() functions separately. This gives a very loose coupling between the actual instance and the gsm_mux array which manages it. It also results in unnecessary lockings which makes it prone to failures. And it creates a race condition if more than the maximum number of mux instances are requested while the user changes the parameters of an active instance. The user may loose ownership of the current mux instance in this case. Fix this by moving the gsm_mux array handling to the mux allocation and deallocation functions. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-3-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix restart handling via CLD commandDaniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.8.2 states that both sides will revert to the non-multiplexed mode via a close-down message (CLD). The usual program flow is as following: - start multiplex mode by sending AT+CMUX to the mobile - establish the control channel (DLCI 0) - establish user channels (DLCI >0) - terminate user channels - send close-down message (CLD) - revert to AT protocol (i.e. leave multiplexed mode) The AT protocol is out of scope of the n_gsm driver. However, gsm_disconnect() sends CLD if gsm_config() detects that the requested parameters require the mux protocol to restart. The next immediate action is to start the mux protocol by opening DLCI 0 again. Any responder side which handles CLD commands correctly forces us to fail at this point because AT+CMUX needs to be sent to the mobile to start the mux again. Therefore, remove the CLD command in this phase and keep both sides in multiplexed mode. Remove the gsm_disconnect() function as it become unnecessary and merge the remaining parts into gsm_cleanup_mux() to handle the termination order and locking correctly. Fixes: 71e077915396 ("tty: n_gsm: do not send/receive in ldisc close path") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix missing mux reset on config change at responderDaniel Starke
Currently, only the initiator resets the mux protocol if the user requests new parameters that are incompatible to those of the current connection. The responder also needs to reset the multiplexer if the new parameter set requires this. Otherwise, we end up with an inconsistent parameter set between initiator and responder. Revert the old behavior to inform the peer upon an incompatible parameter set change from the user on the responder side by re-establishing the mux protocol in such case. Fixes: 509067bbd264 ("tty: n_gsm: Delete gsm_disconnect when config requester") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15nvme-pci: disable namespace identifiers for Qemu controllersChristoph Hellwig
Qemu unconditionally reports a UUID, which depending on the qemu version is either all-null (which is incorrect but harmless) or contains a single bit set for all controllers. In addition it can also optionally report a eui64 which needs to be manually set. Disable namespace identifiers for Qemu controlles entirely even if in some cases they could be set correctly through manual intervention. Reported-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2022-04-15nvme-pci: disable namespace identifiers for the MAXIO MAP1002/1202Christoph Hellwig
The MAXIO MAP1002/1202 controllers reports completely bogus Namespace identifiers that even change after suspend cycles. Disable using the Identifiers entirely. Reported-by: 金韬 <me@kingtous.cn> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Tested-by: 金韬 <me@kingtous.cn>
2022-04-15nvme: add a quirk to disable namespace identifiersChristoph Hellwig
Add a quirk to disable using and exporting namespace identifiers for controllers where they are broken beyond repair. The most directly visible problem with non-unique namespace identifiers is that they break the /dev/disk/by-id/ links, with the link for a supposedly unique identifier now pointing to one of multiple possible namespaces that share the same ID, and a somewhat random selection of which one actually shows up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
2022-04-15nvme: don't print verbose errors for internal passthrough requestsChaitanya Kulkarni
Use the RQF_QUIET flag to skip the newly added verbose error reporting, and set the flag in __nvme_submit_sync_cmd, which is used for most internal passthrough requests where we do expect errors (e.g. due to probing for optional functionality). This is similar to what the SCSI verbose error logging does. Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Alan Adamson <alan.adamson@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Alan Adamson <alan.adamson@oracle.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-04-14ext4: update the cached overhead value in the superblockTheodore Ts'o
If we (re-)calculate the file system overhead amount and it's different from the on-disk s_overhead_clusters value, update the on-disk version since this can take potentially quite a while on bigalloc file systems. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2022-04-14io_uring: abort file assignment prior to assigning credsJens Axboe
We need to either restore creds properly if we fail on the file assignment, or just do the file assignment first instead. Let's do the latter as it's simpler, should make no difference here for file assignment. Link: https://lore.kernel.org/lkml/000000000000a7edb305dca75a50@google.com/ Reported-by: syzbot+60c52ca98513a8760a91@syzkaller.appspotmail.com Fixes: 6bf9c47a3989 ("io_uring: defer file assignment") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-14ext4: force overhead calculation if the s_overhead_cluster makes no senseTheodore Ts'o
If the file system does not use bigalloc, calculating the overhead is cheap, so force the recalculation of the overhead so we don't have to trust the precalculated overhead in the superblock. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2022-04-14ksmbd: set fixed sector size to FS_SECTOR_SIZE_INFORMATIONNamjae Jeon
Currently ksmbd is using ->f_bsize from vfs_statfs() as sector size. If fat/exfat is a local share, ->f_bsize is a cluster size that is too large to be used as a sector size. Sector sizes larger than 4K cause problem occurs when mounting an iso file through windows client. The error message can be obtained using Mount-DiskImage command, the error is: "Mount-DiskImage : The sector size of the physical disk on which the virtual disk resides is not supported." This patch reports fixed 4KB sector size if ->s_blocksize is bigger than 4KB. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-04-14ksmbd: increment reference count of parent fpNamjae Jeon
Add missing increment reference count of parent fp in ksmbd_lookup_fd_inode(). Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-04-14ksmbd: remove filename in ksmbd_fileNamjae Jeon
If the filename is change by underlying rename the server, fp->filename and real filename can be different. This patch remove the uses of fp->filename in ksmbd and replace it with d_path(). Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-04-14ext4: fix overhead calculation to account for the reserved gdt blocksTheodore Ts'o
The kernel calculation was underestimating the overhead by not taking into account the reserved gdt blocks. With this change, the overhead calculated by the kernel matches the overhead calculation in mke2fs. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2022-04-14dm: allow dm_accept_partial_bio() for dm_io without duplicate biosMike Snitzer
The intent behind commit e6fc9f62ce6e ("dm: flag clones created by __send_duplicate_bios") was to formally disallow the use of dm_accept_partial_bio() where it simply isn't possible -- due to constraint that multiple bios cannot meaningfully update a shared tio->len_ptr. But that commit went too far and disallowed the case where "abormal" IO (e.g. WRITE_ZEROES) is only using a single bio. Fix this by not marking a dm_io with a single dm_target_io (and bio), that happens to be created by __send_duplicate_bios, as DM_TIO_IS_DUPLICATE_BIO. Also remove 'unsigned *len' parameter from alloc_multiple_bios(). This commit fixes a dm_accept_partial_bio() BUG_ON() with dm-zoned when a WRITE_ZEROES bio is issued. Fixes: 655f3aad7aa4 ("dm: switch dm_target_io booleans over to proper flags") Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-04-14Merge tag 'drm-fixes-2022-04-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Eggs season holidays are among us, and I think I'd expect some smaller pulls for two weeks then. This seems eerily quiet. One i915 fix, amdgpu has a bunch and msm. I didn't see a misc pull this week, so I expect that will catch up next week. i915: - Correct legacy mmap disabling to use GRAPHICS_VER_FULL msm: - system suspend fix - kzalloc return checks - misc display fix - iommu_present removal amdgpu: - Fix for alpha properly in pre-multiplied mode - Fix VCN 3.1.2 firmware name - Suspend/resume fix - Add a gfxoff quirk for Mac vega20 board - DCN 3.1.6 spread spectrum fix" * tag 'drm-fixes-2022-04-15' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: remove dtbclk_ss compensation for dcn316 drm/amdgpu: Enable gfxoff quirk on MacBook Pro drm/amdgpu: Ensure HDA function is suspended before ASIC reset drm/amdgpu: fix VCN 3.1.2 firmware name drm/amd/display: don't ignore alpha property on pre-multiplied mode drm/msm/gpu: Avoid -Wunused-function with !CONFIG_PM_SLEEP drm/msm/dp: add fail safe mode outside of event_mutex context drm/msm/dsi: Use connector directly in msm_dsi_manager_connector_init() drm/msm: Stop using iommu_present() drm/msm/mdp5: check the return of kzalloc() drm/msm: Fix range size vs end confusion drm/i915: Sunset igpu legacy mmap support based on GRAPHICS_VER_FULL drm/msm/dpu: Use indexed array initializer to prevent mismatches drm/msm/disp: check the return value of kzalloc() dt-bindings: display/msm: another fix for the dpu-qcm2290 example drm/msm: Add missing put_task_struct() in debugfs path drm/msm/gpu: Remove mutex from wait_event condition drm/msm/gpu: Park scheduler threads for system suspend drm/msm/gpu: Rename runtime suspend/resume functions
2022-04-14Merge tag 'vfio-v5.18-rc3' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull vfio fix from Alex Williamson: - Fix VF token checking for vfio-pci variant drivers (Jason Gunthorpe) * tag 'vfio-v5.18-rc3' of https://github.com/awilliam/linux-vfio: vfio/pci: Fix vf_token mechanism when device-specific VF drivers are used
2022-04-14Merge tag '5.18-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: - two fixes related to unmount - symlink overflow fix - minor netfs fix - improved tracing for crediting (flow control) * tag '5.18-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: verify that tcon is valid before dereference in cifs_kill_sb cifs: potential buffer overflow in handling symlinks cifs: Split the smb3_add_credits tracepoint cifs: release cached dentries only if mount is complete cifs: Check the IOCB_DIRECT flag, not O_DIRECT
2022-04-14VFS: filename_create(): fix incorrect intent.NeilBrown
When asked to create a path ending '/', but which is not to be a directory (LOOKUP_DIRECTORY not set), filename_create() will never try to create the file. If it doesn't exist, -ENOENT is reported. However, it still passes LOOKUP_CREATE|LOOKUP_EXCL to the filesystems ->lookup() function, even though there is no intent to create. This is misleading and can cause incorrect behaviour. If you try ln -s foo /path/dir/ where 'dir' is a directory on an NFS filesystem which is not currently known in the dcache, this will fail with ENOENT. But as the name is not in the dcache, nfs_lookup gets called with LOOKUP_CREATE|LOOKUP_EXCL and so it returns NULL without performing any lookup, with the expectation that a subsequent call to create the target will be made, and the lookup can be combined with the creation. In the case with a trailing '/' and no LOOKUP_DIRECTORY, that call is never made. Instead filename_create() sees that the dentry is not (yet) positive and returns -ENOENT - even though the directory actually exists. So only set LOOKUP_CREATE|LOOKUP_EXCL if there really is an intent to create, and use the absence of these flags to decide if -ENOENT should be returned. Note that filename_parentat() is only interested in LOOKUP_REVAL, so we split that out and store it in 'reval_flag'. __lookup_hash() then gets reval_flag combined with whatever create flags were determined to be needed. Reviewed-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-15Merge tag 'amd-drm-fixes-5.18-2022-04-13' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.18-2022-04-13: amdgpu: - Fix for alpha properly in pre-multiplied mode - Fix VCN 3.1.2 firmware name - Suspend/resume fix - Add a gfxoff quirk for Mac vega20 board - DCN 3.1.6 spread spectrum fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220414025821.5811-1-alexander.deucher@amd.com
2022-04-14dt-bindings: display: panel-timing: Define a single type for propertiesRob Herring
It's not good practice to define multiple types for the same property, so factor out the type reference making the properties always an uint32-array with a length of 1 or 3 items. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/20220413140016.3131013-1-robh@kernel.org
2022-04-14Merge tag 'at91-fixes-5.18' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes #1 for 5.18: Only DT fixes. They cover syntax issues as well as features: - fix dtschema check warnings for DMA channel entries, boolean properties and flash names - sam9g20ek audio clock and regulator description - sama5d[34]_xplained SPI pinctrl - align DT with hardware subtleties on sama7g5ek * tag 'at91-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: fix pinctrl phandles ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name ARM: dts: at91: Describe regulators on at91sam9g20ek ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek ARM: dts: at91: Fix boolean properties with values ARM: dts: at91: use generic node name for dataflash ARM: dts: at91: align SPI NOR node name with dtschema ARM: dts: at91: sama7g5ek: Align the impedance of the QSPI0's HSIO and PCB lines ARM: dts: at91: sama7g5ek: enable pull-up on flexcom3 console lines ARM: dts: at91: sama7g5: Swap `rx` and `tx` for `i2c` nodes Link: https://lore.kernel.org/r/20220414143318.26363-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit (git 2.34.1) at 2025-09-13 04:57:06 +0000