summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-11net/smc: Fix NULL pointer dereference in smc_pnet_find_ib()Karsten Graul
dev_name() was called with dev.parent as argument but without to NULL-check it before. Solve this by checking the pointer before the call to dev_name(). Fixes: af5f60c7e3d5 ("net/smc: allow PCI IDs as ib device names in the pnet table") Reported-by: syzbot+03e3e228510223dabd34@syzkaller.appspotmail.com Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11net/smc: use memcpy instead of snprintf to avoid out of bounds readKarsten Graul
Using snprintf() to convert not null-terminated strings to null terminated strings may cause out of bounds read in the source string. Therefore use memcpy() and terminate the target string with a null afterwards. Fixes: fa0866625543 ("net/smc: add support for user defined EIDs") Fixes: 3c572145c24e ("net/smc: add generic netlink support for system EID") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11block: move lower_48_bits() to blockKeith Busch
The function is not generally applicable enough to be included in the core kernel header. Move it to block since it's the only subsystem using it. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20220327173316.315-1-kbusch@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-11net: macb: Restart tx only if queue pointer is laggingTomas Melin
commit 4298388574da ("net: macb: restart tx after tx used bit read") added support for restarting transmission. Restarting tx does not work in case controller asserts TXUBR interrupt and TQBP is already at the end of the tx queue. In that situation, restarting tx will immediately cause assertion of another TXUBR interrupt. The driver will end up in an infinite interrupt loop which it cannot break out of. For cases where TQBP is at the end of the tx queue, instead only clear TX_USED interrupt. As more data gets pushed to the queue, transmission will resume. This issue was observed on a Xilinx Zynq-7000 based board. During stress test of the network interface, driver would get stuck on interrupt loop within seconds or minutes causing CPU to stall. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220407161659.14532-1-tomas.melin@vaisala.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11io_uring: stop using io_wq_work as an fd placeholderJens Axboe
There are two reasons why this isn't the best idea: - It's an odd area to grab a bit of storage space, hence it's an odd area to grab storage from. - It puts the 3rd io_kiocb cacheline into the hot path, where normal hot path just needs the first two. Use 'cflags' for joint fd/cflags storage. We only need fd until we successfully issue, and we only need cflags once a request is done and is completed. Fixes: 6bf9c47a3989 ("io_uring: defer file assignment") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-11io_uring: move apoll->events cacheJens Axboe
In preparation for fixing a regression with pulling in an extra cacheline for IO that doesn't usually touch the last cacheline of the io_kiocb, move the cached location of apoll->events to space shared with some other completion data. Like cflags, this isn't used until after the request has been completed, so we can piggy back on top of comp_list. Fixes: 81459350d581 ("io_uring: cache req->apoll->events in req->cflags") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-11io_uring: io_kiocb_update_pos() should not touch file for non -1 offsetJens Axboe
-1 tells use to use the current position, but we check if the file is a stream regardless of that. Fix up io_kiocb_update_pos() to only dip into file if we need to. This is both more efficient and also drops 12 bytes of text on aarch64 and 64 bytes on x86-64. Fixes: b4aec4001595 ("io_uring: do not recalculate ppos unnecessarily") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-11phy: ti: tusb1210: Fix an error handling path in tusb1210_probe()Christophe JAILLET
tusb1210_probe_charger_detect() must be undone by a corresponding tusb1210_remove_charger_detect() in the error handling path, as already done in the remove function. Fixes: 48969a5623ed ("phy: ti: tusb1210: Add charger detection") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/07c4926c42243cedb3b6067a241bb486fdda01b5.1648991162.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-11KVM: x86: hyper-v: Avoid writing to TSC page without an active vCPUVitaly Kuznetsov
The following WARN is triggered from kvm_vm_ioctl_set_clock(): WARNING: CPU: 10 PID: 579353 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:3161 mark_page_dirty_in_slot+0x6c/0x80 [kvm] ... CPU: 10 PID: 579353 Comm: qemu-system-x86 Tainted: G W O 5.16.0.stable #20 Hardware name: LENOVO 20UF001CUS/20UF001CUS, BIOS R1CET65W(1.34 ) 06/17/2021 RIP: 0010:mark_page_dirty_in_slot+0x6c/0x80 [kvm] ... Call Trace: <TASK> ? kvm_write_guest+0x114/0x120 [kvm] kvm_hv_invalidate_tsc_page+0x9e/0xf0 [kvm] kvm_arch_vm_ioctl+0xa26/0xc50 [kvm] ? schedule+0x4e/0xc0 ? __cond_resched+0x1a/0x50 ? futex_wait+0x166/0x250 ? __send_signal+0x1f1/0x3d0 kvm_vm_ioctl+0x747/0xda0 [kvm] ... The WARN was introduced by commit 03c0304a86bc ("KVM: Warn if mark_page_dirty() is called without an active vCPU") but the change seems to be correct (unlike Hyper-V TSC page update mechanism). In fact, there's no real need to actually write to guest memory to invalidate TSC page, this can be done by the first vCPU which goes through kvm_guest_time_update(). Reported-by: Maxim Levitsky <mlevitsk@redhat.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220407201013.963226-1-vkuznets@redhat.com>
2022-04-11KVM: SVM: Do not activate AVIC for SEV-enabled guestSuravee Suthikulpanit
Since current AVIC implementation cannot support encrypted memory, inhibit AVIC for SEV-enabled guest. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20220408133710.54275-1-suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-11Documentation: KVM: Add SPDX-License-Identifier tagLike Xu
+new file mode 100644 +WARNING: Missing or malformed SPDX-License-Identifier tag in line 1 +#27: FILE: Documentation/virt/kvm/x86/errata.rst:1: Opportunistically update all other non-added KVM documents and remove a new extra blank line at EOF for x86/errata.rst. Signed-off-by: Like Xu <likexu@tencent.com> Message-Id: <20220406063715.55625-5-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-11selftests: kvm: add tsc_scaling_sync to .gitignoreLike Xu
The tsc_scaling_sync's binary should be present in the .gitignore file for the git to ignore it. Signed-off-by: Like Xu <likexu@tencent.com> Message-Id: <20220406063715.55625-3-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-11Merge tag 'kvm-riscv-fixes-5.18-1' of https://github.com/kvm-riscv/linux ↵Paolo Bonzini
into HEAD KVM/riscv fixes for 5.18, take #1 - Remove hgatp zeroing in kvm_arch_vcpu_put() - Fix alignment of the guest_hang() in KVM selftest - Fix PTE A and D bits in KVM selftest - Missing #include in vcpu_fp.c
2022-04-11phy: samsung: exynos5250-sata: fix missing device put in probe error pathsKrzysztof Kozlowski
The actions of of_find_i2c_device_by_node() in probe function should be reversed in error paths by putting the reference to obtained device. Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220407091857.230386-2-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-11phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probeMiaoqian Lin
The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220407091857.230386-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-11phy: ti: Fix missing of_node_put in ti_pipe3_get_sysctrl()Lv Ruyi
of_parse_phandle() returns node pointer with refcount incremented, use of_node_put() on it to decrease refcount when done. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Link: https://lore.kernel.org/r/20220408095617.2495234-1-lv.ruyi@zte.com.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-11drm/msm/dp: add fail safe mode outside of event_mutex contextKuogee Hsieh
There is possible circular locking dependency detected on event_mutex (see below logs). This is due to set fail safe mode is done at dp_panel_read_sink_caps() within event_mutex scope. To break this possible circular locking, this patch move setting fail safe mode out of event_mutex scope. [ 23.958078] ====================================================== [ 23.964430] WARNING: possible circular locking dependency detected [ 23.970777] 5.17.0-rc2-lockdep-00088-g05241de1f69e #148 Not tainted [ 23.977219] ------------------------------------------------------ [ 23.983570] DrmThread/1574 is trying to acquire lock: [ 23.988763] ffffff808423aab0 (&dp->event_mutex){+.+.}-{3:3}, at: msm_dp_displ ay_enable+0x58/0x164 [ 23.997895] [ 23.997895] but task is already holding lock: [ 24.003895] ffffff808420b280 (&kms->commit_lock[i]/1){+.+.}-{3:3}, at: lock_c rtcs+0x80/0x8c [ 24.012495] [ 24.012495] which lock already depends on the new lock. [ 24.012495] [ 24.020886] [ 24.020886] the existing dependency chain (in reverse order) is: [ 24.028570] [ 24.028570] -> #5 (&kms->commit_lock[i]/1){+.+.}-{3:3}: [ 24.035472] __mutex_lock+0xc8/0x384 [ 24.039695] mutex_lock_nested+0x54/0x74 [ 24.044272] lock_crtcs+0x80/0x8c [ 24.048222] msm_atomic_commit_tail+0x1e8/0x3d0 [ 24.053413] commit_tail+0x7c/0xfc [ 24.057452] drm_atomic_helper_commit+0x158/0x15c [ 24.062826] drm_atomic_commit+0x60/0x74 [ 24.067403] drm_mode_atomic_ioctl+0x6b0/0x908 [ 24.072508] drm_ioctl_kernel+0xe8/0x168 [ 24.077086] drm_ioctl+0x320/0x370 [ 24.081123] drm_compat_ioctl+0x40/0xdc [ 24.085602] __arm64_compat_sys_ioctl+0xe0/0x150 [ 24.090895] invoke_syscall+0x80/0x114 [ 24.095294] el0_svc_common.constprop.3+0xc4/0xf8 [ 24.100668] do_el0_svc_compat+0x2c/0x54 [ 24.105242] el0_svc_compat+0x4c/0xe4 [ 24.109548] el0t_32_sync_handler+0xc4/0xf4 [ 24.114381] el0t_32_sync+0x178 [ 24.118688] [ 24.118688] -> #4 (&kms->commit_lock[i]){+.+.}-{3:3}: [ 24.125408] __mutex_lock+0xc8/0x384 [ 24.129628] mutex_lock_nested+0x54/0x74 [ 24.134204] lock_crtcs+0x80/0x8c [ 24.138155] msm_atomic_commit_tail+0x1e8/0x3d0 [ 24.143345] commit_tail+0x7c/0xfc [ 24.147382] drm_atomic_helper_commit+0x158/0x15c [ 24.152755] drm_atomic_commit+0x60/0x74 [ 24.157323] drm_atomic_helper_set_config+0x68/0x90 [ 24.162869] drm_mode_setcrtc+0x394/0x648 [ 24.167535] drm_ioctl_kernel+0xe8/0x168 [ 24.172102] drm_ioctl+0x320/0x370 [ 24.176135] drm_compat_ioctl+0x40/0xdc [ 24.180621] __arm64_compat_sys_ioctl+0xe0/0x150 [ 24.185904] invoke_syscall+0x80/0x114 [ 24.190302] el0_svc_common.constprop.3+0xc4/0xf8 [ 24.195673] do_el0_svc_compat+0x2c/0x54 [ 24.200241] el0_svc_compat+0x4c/0xe4 [ 24.204544] el0t_32_sync_handler+0xc4/0xf4 [ 24.209378] el0t_32_sync+0x174/0x178 [ 24.213680] -> #3 (crtc_ww_class_mutex){+.+.}-{3:3}: [ 24.220308] __ww_mutex_lock.constprop.20+0xe8/0x878 [ 24.225951] ww_mutex_lock+0x60/0xd0 [ 24.230166] modeset_lock+0x190/0x19c [ 24.234467] drm_modeset_lock+0x34/0x54 [ 24.238953] drmm_mode_config_init+0x550/0x764 [ 24.244065] msm_drm_bind+0x170/0x59c [ 24.248374] try_to_bring_up_master+0x244/0x294 [ 24.253572] __component_add+0xf4/0x14c [ 24.258057] component_add+0x2c/0x38 [ 24.262273] dsi_dev_attach+0x2c/0x38 [ 24.266575] dsi_host_attach+0xc4/0x120 [ 24.271060] mipi_dsi_attach+0x34/0x48 [ 24.275456] devm_mipi_dsi_attach+0x28/0x68 [ 24.280298] ti_sn_bridge_probe+0x2b4/0x2dc [ 24.285137] auxiliary_bus_probe+0x78/0x90 [ 24.289893] really_probe+0x1e4/0x3d8 [ 24.294194] __driver_probe_device+0x14c/0x164 [ 24.299298] driver_probe_device+0x54/0xf8 [ 24.304043] __device_attach_driver+0xb4/0x118 [ 24.309145] bus_for_each_drv+0xb0/0xd4 [ 24.313628] __device_attach+0xcc/0x158 [ 24.318112] device_initial_probe+0x24/0x30 [ 24.322954] bus_probe_device+0x38/0x9c [ 24.327439] deferred_probe_work_func+0xd4/0xf0 [ 24.332628] process_one_work+0x2f0/0x498 [ 24.337289] process_scheduled_works+0x44/0x48 [ 24.342391] worker_thread+0x1e4/0x26c [ 24.346788] kthread+0xe4/0xf4 [ 24.350470] ret_from_fork+0x10/0x20 [ 24.354683] [ 24.354683] [ 24.354683] -> #2 (crtc_ww_class_acquire){+.+.}-{0:0}: [ 24.361489] drm_modeset_acquire_init+0xe4/0x138 [ 24.366777] drm_helper_probe_detect_ctx+0x44/0x114 [ 24.372327] check_connector_changed+0xbc/0x198 [ 24.377517] drm_helper_hpd_irq_event+0xcc/0x11c [ 24.382804] dsi_hpd_worker+0x24/0x30 [ 24.387104] process_one_work+0x2f0/0x498 [ 24.391762] worker_thread+0x1d0/0x26c [ 24.396158] kthread+0xe4/0xf4 [ 24.399840] ret_from_fork+0x10/0x20 [ 24.404053] [ 24.404053] -> #1 (&dev->mode_config.mutex){+.+.}-{3:3}: [ 24.411032] __mutex_lock+0xc8/0x384 [ 24.415247] mutex_lock_nested+0x54/0x74 [ 24.419819] dp_panel_read_sink_caps+0x23c/0x26c [ 24.425108] dp_display_process_hpd_high+0x34/0xd4 [ 24.430570] dp_display_usbpd_configure_cb+0x30/0x3c [ 24.436205] hpd_event_thread+0x2ac/0x550 [ 24.440864] kthread+0xe4/0xf4 [ 24.444544] ret_from_fork+0x10/0x20 [ 24.448757] [ 24.448757] -> #0 (&dp->event_mutex){+.+.}-{3:3}: [ 24.455116] __lock_acquire+0xe2c/0x10d8 [ 24.459690] lock_acquire+0x1ac/0x2d0 [ 24.463988] __mutex_lock+0xc8/0x384 [ 24.468201] mutex_lock_nested+0x54/0x74 [ 24.472773] msm_dp_display_enable+0x58/0x164 [ 24.477789] dp_bridge_enable+0x24/0x30 [ 24.482273] drm_atomic_bridge_chain_enable+0x78/0x9c [ 24.488006] drm_atomic_helper_commit_modeset_enables+0x1bc/0x244 [ 24.494801] msm_atomic_commit_tail+0x248/0x3d0 [ 24.499992] commit_tail+0x7c/0xfc [ 24.504031] drm_atomic_helper_commit+0x158/0x15c [ 24.509404] drm_atomic_commit+0x60/0x74 [ 24.513976] drm_mode_atomic_ioctl+0x6b0/0x908 [ 24.519079] drm_ioctl_kernel+0xe8/0x168 [ 24.523650] drm_ioctl+0x320/0x370 [ 24.527689] drm_compat_ioctl+0x40/0xdc [ 24.532175] __arm64_compat_sys_ioctl+0xe0/0x150 [ 24.537463] invoke_syscall+0x80/0x114 [ 24.541861] el0_svc_common.constprop.3+0xc4/0xf8 [ 24.547235] do_el0_svc_compat+0x2c/0x54 [ 24.551806] el0_svc_compat+0x4c/0xe4 [ 24.556106] el0t_32_sync_handler+0xc4/0xf4 [ 24.560948] el0t_32_sync+0x174/0x178 Changes in v2: -- add circular lockiing trace Fixes: d4aca422539c ("drm/msm/dp: always add fail-safe mode into connector mode list") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/481396/ Link: https://lore.kernel.org/r/1649451894-554-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-11drm/msm/dsi: Use connector directly in msm_dsi_manager_connector_init()Stephen Boyd
The member 'msm_dsi->connector' isn't assigned until msm_dsi_manager_connector_init() returns (see msm_dsi_modeset_init() and how it assigns the return value). Therefore this pointer is going to be NULL here. Let's use 'connector' which is what was intended. Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Sean Paul <seanpaul@chromium.org> Fixes: 6d5e78406991 ("drm/msm/dsi: Move dsi panel init into modeset init path") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/478693/ Link: https://lore.kernel.org/r/20220318000731.2823718-1-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-11drm/msm: Stop using iommu_present()Robin Murphy
Even if some IOMMU has registered itself on the platform "bus", that doesn't necessarily mean it provides translation for the device we care about. Replace iommu_present() with a more appropriate check. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/480707/ Link: https://lore.kernel.org/r/5ab4f4574d7f3e042261da702d493ee40d003356.1649168268.git.robin.murphy@arm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-11drm/msm/mdp5: check the return of kzalloc()Xiaoke Wang
kzalloc() is a memory allocation function which can return NULL when some internal memory errors happen. So it is better to check it to prevent potential wrong memory access. Besides, since mdp5_plane_reset() is void type, so we should better set `plane-state` to NULL after releasing it. Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/481055/ Link: https://lore.kernel.org/r/tencent_8E2A1C78140EE1784AB2FF4B2088CC0AB908@qq.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-11drm/msm: Fix range size vs end confusionRob Clark
The fourth param is size, rather than range_end. Note that we could increase the address space size if we had a way to prevent buffers from spanning a 4G split, mostly just to avoid fw bugs with 64b math. Fixes: 84c31ee16f90 ("drm/msm/a6xx: Add support for per-instance pagetables") Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220407202836.1211268-1-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-11arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO pin labeling for CON1Guillaume Giraudon
The labels for lines 61 through 84 on the periphs-banks were offset by 2. 2 lines are missing in the BOOT GPIO lines (contains 14, should be 16) Added 2 empty entries in BOOT to realigned the rest of GPIO labels to match the Banana Pi M5 schematics. (Thanks to Neil Armstrong for the heads up on the position of the missing pins) Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts") Signed-off-by: Guillaume Giraudon <ggiraudon@prism19.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220411144427.874-1-ggiraudon@prism19.com
2022-04-11bpf: Fix release of page_pool in BPF_PROG_RUN in test runnerToke Høiland-Jørgensen
The live packet mode in BPF_PROG_RUN allocates a page_pool instance for each test run instance and uses it for the packet data. On setup it creates the page_pool, and calls xdp_reg_mem_model() to allow pages to be returned properly from the XDP data path. However, xdp_reg_mem_model() also raises the reference count of the page_pool itself, so the single page_pool_destroy() count on teardown was not enough to actually release the pool. To fix this, add an additional xdp_unreg_mem_model() call on teardown. Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN") Reported-by: Freysteinn Alfredsson <freysteinn.alfredsson@kau.se> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20220409213053.3117305-1-toke@redhat.com
2022-04-11phy: ti: tusb1210: Make tusb1210_chg_det_states staticHans de Goede
Make tusb1210_chg_det_states static, fixing the following sparse warning: drivers/phy/ti/phy-tusb1210.c:158:12: sparse: sparse: symbol 'tusb1210_chg_det_states' was not declared. Should it be static? Fixes: 48969a5623ed ("phy: ti: tusb1210: Add charger detection") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220411135440.558394-1-hdegoede@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-11dmaengine: imx-sdma: Fix error checking in sdma_event_remapMiaoqian Lin
of_parse_phandle() returns NULL on errors, rather than error pointers. Using NULL check on grp_np to fix this. Fixes: d078cd1b4185 ("dmaengine: imx-sdma: Add imx6sx platform support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220308064952.15743-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-11dma: at_xdmac: fix a missing check on list iteratorXiaomeng Tong
The bug is here: __func__, desc, &desc->tx_dma_desc.phys, ret, cookie, residue); The list iterator 'desc' will point to a bogus position containing HEAD if the list is empty or no element is found. To avoid dev_dbg() prints a invalid address, use a new variable 'iter' as the list iterator, while use the origin variable 'desc' as a dedicated pointer to point to the found element. Cc: stable@vger.kernel.org Fixes: 82e2424635f4c ("dmaengine: xdmac: fix print warning on dma_addr_t variable") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Link: https://lore.kernel.org/r/20220327061154.4867-1-xiam0nd.tong@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-11ipv6: fix panic when forwarding a pkt with no in6 devNicolas Dichtel
kongweibin reported a kernel panic in ip6_forward() when input interface has no in6 dev associated. The following tc commands were used to reproduce this panic: tc qdisc del dev vxlan100 root tc qdisc add dev vxlan100 root netem corrupt 5% CC: stable@vger.kernel.org Fixes: ccd27f05ae7b ("ipv6: fix 'disable_policy' for fwd packets") Reported-by: kongweibin <kongweibin2@huawei.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-11dpaa_eth: Fix missing of_node_put in dpaa_get_ts_info()Lv Ruyi
Both of of_get_parent() and of_parse_phandle() return node pointer with refcount incremented, use of_node_put() on it to decrease refcount when done. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-11dmaengine: imx-sdma: fix init of uart scriptsKevin Groeneveld
Commit b98ce2f4e32b ("dmaengine: imx-sdma: add uart rom script") broke uart rx on imx5 when using sdma firmware from older Freescale 2.6.35 kernel. In this case reading addr->uartXX_2_mcu_addr was going out of bounds of the firmware memory and corrupting the uart script addresses. Simply adding a bounds check before accessing addr->uartXX_2_mcu_addr does not work as the uartXX_2_mcu_addr members are now beyond the size of the older firmware and the uart addresses would never be populated in that case. There are other ways to fix this but overall the logic seems clearer to me to revert the uartXX_2_mcu_ram_addr structure entries back to uartXX_2_mcu_addr, change the newer entries to uartXX_2_mcu_rom_addr and update the logic accordingly. I have tested this patch on: 1. An i.MX53 system with sdma firmware from Freescale 2.6.35 kernel. Without this patch uart rx is broken in this scenario, with the patch uart rx is restored. 2. An i.MX6D system with no external sdma firmware. uart is okay with or without this patch. 3. An i.MX8MM system using current sdma-imx7d.bin firmware from linux-firmware. uart is okay with or without this patch and I confirmed the rom version of the uart script is being used which was the intention and reason for commit b98ce2f4e32b ("dmaengine: imx-sdma: add uart rom script") in the first place. Fixes: b98ce2f4e32b ("dmaengine: imx-sdma: add uart rom script") Cc: stable@vger.kernel.org Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220410223118.15086-1-kgroeneveld@lenbrook.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-11netfilter: nft_socket: make cgroup match work in input tooFlorian Westphal
cgroupv2 helper function ignores the already-looked up sk and uses skb->sk instead. Just pass sk from the calling function instead; this will make cgroup matching work for udp and tcp in input even when edemux did not set skb->sk already. Fixes: e0bb96db96f8 ("netfilter: nft_socket: add support for cgroupsv2") Signed-off-by: Florian Westphal <fw@strlen.de> Tested-by: Topi Miettinen <toiwoton@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-04-11mac80211: fix ht_capa printout in debugfsBen Greear
Don't use sizeof(pointer) when calculating scnprintf offset. Fixes: 01f84f0ed3b4 ("mac80211: reduce stack usage in debugfs") Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20220406175659.20611-1-greearb@candelatech.com [correct the Fixes tag] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-11cfg80211: hold bss_lock while updating nontrans_listRameshkumar Sundaram
Synchronize additions to nontrans_list of transmitting BSS with bss_lock to avoid races. Also when cfg80211_add_nontrans_list() fails __cfg80211_unlink_bss() needs bss_lock to be held (has lockdep assert on bss_lock). So protect the whole block with bss_lock to avoid races and warnings. Found during code review. Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Link: https://lore.kernel.org/r/1649668071-9370-1-git-send-email-quic_ramess@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-11nl80211: correctly check NL80211_ATTR_REG_ALPHA2 sizeJohannes Berg
We need this to be at least two bytes, so we can access alpha2[0] and alpha2[1]. It may be three in case some userspace used NUL-termination since it was NLA_STRING (and we also push it out with NUL-termination). Cc: stable@vger.kernel.org Reported-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220411114201.fd4a31f06541.Ie7ff4be2cf348d8cc28ed0d626fc54becf7ea799@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-11net/sched: taprio: Check if socket flags are validBenedikt Spranger
A user may set the SO_TXTIME socket option to ensure a packet is send at a given time. The taprio scheduler has to confirm, that it is allowed to send a packet at that given time, by a check against the packet time schedule. The scheduler drop the packet, if the gates are closed at the given send time. The check, if SO_TXTIME is set, may fail since sk_flags are part of an union and the union is used otherwise. This happen, if a socket is not a full socket, like a request socket for example. Add a check to verify, if the union is used for sk_flags. Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-11net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-linkDinh Nguyen
When using a fixed-link, the altr_tse_pcs driver crashes due to null-pointer dereference as no phy_device is provided to tse_pcs_fix_mac_speed function. Fix this by adding a check for phy_dev before calling the tse_pcs_fix_mac_speed() function. Also clean up the tse_pcs_fix_mac_speed function a bit. There is no need to check for splitter_base and sgmii_adapter_base because the driver will fail if these 2 variables are not derived from the device tree. Fixes: fb3bbdb85989 ("net: ethernet: Add TSE PCS support to dwmac-socfpga") Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-11net: phy: LAN87xx: remove genphy_softreset in config_anegArun Ramadoss
When the T1 phy master/slave state is changed, at the end of config_aneg function genphy_softreset is called. After the reset all the registers configured during the config_init are restored to default value. To avoid this, removed the genphy_softreset call. v1->v2 ------ Added the author in cc Fixes: 8a1b415d70b7 ("net: phy: added ethtool master-slave configuration support") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-11bus: imx-weim: make symbol 'weim_of_notifier' staticWei Yongjun
The sparse tool complains as follows: drivers/bus/imx-weim.c:373:23: warning: symbol 'weim_of_notifier' was not declared. Should it be static? This symbol is not used outside of imx-weim.c, so marks it static. Fixes: e6cb5408289f ("bus: imx-weim: add DT overlay support for WEIM bus") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-11USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositionsDaniele Palmas
Add support for the following Telit FN980 and FN990 compositions: 0x1057: tty, adb, rmnet, tty, tty, tty, tty, tty 0x1058: tty, adb, tty, tty, tty, tty, tty 0x1075: adb, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20220406141408.580669-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-04-11x86/tsx: Disable TSX development mode at bootPawan Gupta
A microcode update on some Intel processors causes all TSX transactions to always abort by default[*]. Microcode also added functionality to re-enable TSX for development purposes. With this microcode loaded, if tsx=on was passed on the cmdline, and TSX development mode was already enabled before the kernel boot, it may make the system vulnerable to TSX Asynchronous Abort (TAA). To be on safer side, unconditionally disable TSX development mode during boot. If a viable use case appears, this can be revisited later. [*]: Intel TSX Disable Update for Selected Processors, doc ID: 643557 [ bp: Drop unstable web link, massage heavily. ] Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com> Suggested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Neelima Krishnan <neelima.krishnan@intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/347bd844da3a333a9793c6687d4e4eb3b2419a3e.1646943780.git.pawan.kumar.gupta@linux.intel.com
2022-04-11genirq/affinity: Consider that CPUs on nodes can be unbalancedRei Yamamoto
If CPUs on a node are offline at boot time, the number of nodes is different when building affinity masks for present cpus and when building affinity masks for possible cpus. This causes the following problem: In the case that the number of vectors is less than the number of nodes there are cases where bits of masks for present cpus are overwritten when building masks for possible cpus. Fix this by excluding CPUs, which are not part of the current build mask (present/possible). [ tglx: Massaged changelog and added comment ] Fixes: b82592199032 ("genirq/affinity: Spread IRQs to all available NUMA nodes") Signed-off-by: Rei Yamamoto <yamamoto.rei@jp.fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220331003309.10891-1-yamamoto.rei@jp.fujitsu.com
2022-04-11x86/tsx: Use MSR_TSX_CTRL to clear CPUID bitsPawan Gupta
tsx_clear_cpuid() uses MSR_TSX_FORCE_ABORT to clear CPUID.RTM and CPUID.HLE. Not all CPUs support MSR_TSX_FORCE_ABORT, alternatively use MSR_IA32_TSX_CTRL when supported. [ bp: Document how and why TSX gets disabled. ] Fixes: 293649307ef9 ("x86/tsx: Clear CPUID bits when TSX always force aborts") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Neelima Krishnan <neelima.krishnan@intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/5b323e77e251a9c8bcdda498c5cc0095be1e1d3c.1646943780.git.pawan.kumar.gupta@linux.intel.com
2022-04-11ALSA: hda/realtek: add quirk for Lenovo Thinkpad X12 speakersTao Jin
For this specific device on Lenovo Thinkpad X12 tablet, the verbs were dumped by qemu running a guest OS that init this codec properly. After studying the dump, it turns out that the same quirk used by the other Lenovo devices can be reused. The patch was tested working against the mainline kernel. Cc: <stable@vger.kernel.org> Signed-off-by: Tao Jin <tao-j@outlook.com> Link: https://lore.kernel.org/r/CO6PR03MB6241CD73310B37858FE64C85E1E89@CO6PR03MB6241.namprd03.prod.outlook.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-04-11ALSA: pcm: Test for "silence" field in struct "pcm_format_data"Fabio M. De Francesco
Syzbot reports "KASAN: null-ptr-deref Write in snd_pcm_format_set_silence".[1] It is due to missing validation of the "silence" field of struct "pcm_format_data" in "pcm_formats" array. Add a test for valid "pat" and, if it is not so, return -EINVAL. [1] https://lore.kernel.org/lkml/000000000000d188ef05dc2c7279@google.com/ Reported-and-tested-by: syzbot+205eb15961852c2c5974@syzkaller.appspotmail.com Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220409012655.9399-1-fmdefrancesco@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-04-11video: fbdev: i740fb: Error out if 'pixclock' equals zeroZheyu Ma
The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of 'pixclock', it may cause divide error. Fix this by checking whether 'pixclock' is zero in the function i740fb_check_var(). The following log reveals it: divide error: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:i740fb_decode_var drivers/video/fbdev/i740fb.c:444 [inline] RIP: 0010:i740fb_set_par+0x272f/0x3bb0 drivers/video/fbdev/i740fb.c:739 Call Trace: fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1036 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1112 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1191 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-11video: fbdev: i740fb: use memset_io() to clear screenOndrej Zary
sparse complains that using memset() on __iomem pointer is wrong: incorrect type in argument 1 (different address spaces) Use memset_io() to clear screen instead. Tested on real i740 cards. Signed-off-by: Ondrej Zary <linux@zary.sk> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-11video: fbdev: s3fb: Error out if 'pixclock' equals zeroZheyu Ma
The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of 'pixclock', it may cause divide error. Fix this by checking whether 'pixclock' is zero in s3fb_check_var(). The following log reveals it: divide error: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:s3fb_check_var+0x3f3/0x530 Call Trace: <TASK> fb_set_var+0x367/0xeb0 do_fb_ioctl+0x234/0x670 fb_ioctl+0xdd/0x130 do_syscall_64+0x3b/0x90 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-11video: fbdev: arkfb: Error out if 'pixclock' equals zeroZheyu Ma
The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of 'pixclock', it may cause divide error. Fix this by checking whether 'pixclock' is zero. The following log reveals it: divide error: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:arkfb_set_par+0x10fc/0x24f0 Call Trace: <TASK> fb_set_var+0x604/0xeb0 do_fb_ioctl+0x234/0x670 fb_ioctl+0xdd/0x130 do_syscall_64+0x3b/0x90 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-11video: fbdev: tridentfb: Error out if 'pixclock' equals zeroZheyu Ma
The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of 'pixclock', it may cause divide error. Fix this by checking whether 'pixclock' is zero. The following log reveals it: divide error: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:tridentfb_check_var+0x853/0xe60 Call Trace: <TASK> fb_set_var+0x367/0xeb0 do_fb_ioctl+0x234/0x670 fb_ioctl+0xdd/0x130 do_syscall_64+0x3b/0x90 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-11video: fbdev: vt8623fb: Error out if 'pixclock' equals zeroZheyu Ma
The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of 'pixclock', it may cause divide error. Fix this by checking whether 'pixclock' is zero in the function vt8623fb_check_var(). The following log reveals it: divide error: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:vt8623fb_set_par+0xecd/0x2210 Call Trace: <TASK> fb_set_var+0x604/0xeb0 do_fb_ioctl+0x234/0x670 fb_ioctl+0xdd/0x130 do_syscall_64+0x3b/0x90 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-11video: fbdev: kyro: Error out if 'lineclock' equals zeroZheyu Ma
The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of 'lineclock', it may cause divide error. Fix this by checking whether 'lineclock' is zero. The following log reveals it: divide error: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:kyrofb_set_par+0x30d/0xd80 Call Trace: <TASK> fb_set_var+0x604/0xeb0 do_fb_ioctl+0x234/0x670 fb_ioctl+0xdd/0x130 do_syscall_64+0x3b/0x90 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
generated by cgit (git 2.34.1) at 2025-09-14 02:37:03 +0000