| Age | Commit message (Collapse) | Author |
|---|
|
Samsung MIPI DSIM controller is common DSI IP that can be used
in various SoCs like Exynos, i.MX8M Mini/Nano/Plus.
Add hw_type enum via platform_data so that accessing the different
controller data between various platforms becomes easy and meaningful.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Look like PLL PMS_P offset value varies between platforms that have
Samsung DSIM IP.
However, there is no clear evidence for it as both Exynos and i.MX
8M Mini Application Processor Reference Manual is still referring
the PMS_P offset as 13.
The offset 13 is not working for i.MX8M Mini SoCs but the downstream
NXP sec-dsim.c driver is using offset 14 for i.MX8M Mini SoC platforms
[1] [2].
PMS_P value set in sec_mipi_dsim_check_pll_out using PLLCTRL_SET_P()
with offset 13 and then an additional offset of one bit added in
sec_mipi_dsim_config_pll via PLLCTRL_SET_PMS().
Not sure whether it is reference manual documentation or something
else but this patch trusts the downstream code and handle PLL_P offset
via platform driver data so-that imx8mm driver data shall use
pll_p_offset to 14.
Similar to Mini the i.MX8M Nano/Plus also has P=14, unlike Exynos.
[1] https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/gpu/drm/bridge/sec-dsim.c?h=imx_5.4.47_2.2.0#n210
[2] https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/gpu/drm/bridge/sec-dsim.c?h=imx_5.4.47_2.2.0#n211
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The same Samsung MIPI DSIM master can also be used in NXP's
i.MX8M Mini/Nano/Plus SoC.
In i.MX8M Mini/Nano/Plus SoC the DSI Phy requires a MIPI DPHY
bit to reset in order to activate the PHY and that can be done
via upstream i.MX8M blk-ctrl driver.
So, mark the phy get as optional.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
In general, for MIPI DSI there are three ways to represent the
pipeline for an upstream bridge to find the connected downstream
panel or bridge.
1. Child panel or bridge as a conventional device tree child node.
2. Child panel or bridge as an OF-graph port node.
3. Child panel or bridge as an OF-graph ports node.
There are three different downstream panels or bridges that are
possible to connect an upstream DSI host bridge - DSI Panel,
DSI Bridge, and I2C-Configured DSI bridge.
An example of the downstream panel represented as a child node,
&dsi {
compatible = "samsung,exynos5433-mipi-dsi";
ports {
port@0 {
reg = <0>;
dsi_to_mic: endpoint {
remote-endpoint = <&mic_to_dsi>;
};
};
};
panel@0 {
reg = <0>;
};
};
An example of the downstream bridge represented as a port node,
&i2c4 {
bridge@2c {
compatible = "ti,sn65dsi84";
ports {
port@0 {
reg = <0>;
bridge_in_dsi: endpoint {
remote-endpoint = <&dsi_out_bridge>;
data-lanes = <1 2>;
};
};
port@2 {
reg = <2>;
bridge_out_panel: endpoint {
remote-endpoint = <&panel_out_bridge>;
};
};
};
};
};
&dsi {
compatible = "fsl,imx8mm-mipi-dsim";
port {
dsi_in_lcdif: endpoint@0 {
reg = <0>;
remote-endpoint = <&lcdif_out_dsi>;
};
dsi_out_bridge: endpoint@1 {
reg = <1>;
remote-endpoint = <&bridge_in_dsi>;
};
};
};
An example of the downstream bridge represented as a ports node,
&dsi {
compatible = "fsl,imx8mm-mipi-dsim";
ports {
port@0 {
reg = <0>;
dsi_in_lcdif: endpoint@0 {
reg = <0>;
remote-endpoint = <&lcdif_out_dsi>;
};
};
port@1 {
reg = <1>;
dsi_out_bridge: endpoint {
remote-endpoint = <&bridge_in_dsi>;
};
};
};
In, summary it is possible to represent all three downstream slaves
devices using OF-graph port or ports node however only DSI Panel and
DSI Bridge are possible but not possible to represent I2C-Configured
DSI bridge child nodes since I2C-Configure bridges are child of I2C
node, not upstream DSI host bridge and it is must represent them
endpoint port linking.
This indeed means, the OF-graph port or ports representation is
mandatory for I2C-Configured DSI bridges.
This patch tries to add an OF-graph port or ports representation
detection code on top of existing child node detection.
It is possible to replace the entire detection code using existing
drm_of helper drm_of_find_panel_or_bridge but it will break the
Exynos DSI since the pipeline doesn't support OF-graph port or ports
node.
Overall, this patch has a combination of child and OF-graph pipeline
detections in order to support the backward compatibility of Exynos
DSI child node and i.MX8M Mini/Nano/Plus OF-graph port or ports
node pipelines.
This is the first common DSI host bridge driver that needs to support
all possible downstream connection pipeline combinations.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Exynos DSI already converted into a bridge driver, so bridge
detach will suppose happened during bridge chain removal done
by the bridge core.
Drop the explicit call chain to detach the bridge.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Add driver data of mt8188 vdosys0 to mediatek-drm and the sub driver.
Signed-off-by: amy zhang <Amy.Zhang@mediatek.com>
Signed-off-by: Nathan Lu <nathan.lu@mediatek.com>
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230324100553.13719-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
This panel is found in Lenovo Flex 5G laptop, so add the entry for it
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230324165909.131831-1-vkoul@kernel.org
|
|
A kzalloc()+memcpy() can be optimized in a single kmemdup().
This saves a few cycles because some memory doesn't need to be zeroed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Variable dppclk_delay_subtotal is not effectively used, so delete it.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_rq_dlg_calc_314.c:1004:15: warning: variable 'dppclk_delay_subtotal' set but not used.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4584
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No functional modification involved.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4585
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Skip TMR unload for Navi12 and CHIP_SIENNA_CICHLID SRIOV as TMR is
not loaded at all
Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Don't dereference "db->dsi_dev" when it is an error pointer.
Fixes: 249a4f5e663c ("drm/panel: Add Magnachip D53E6EA8966 Panel Driver")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/de0273a8-8910-4ac4-b4ed-f7691c4d2ca6@kili.mountain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux into drm-next
Miscellaneous fixes and improvements for rcar-du
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230325204922.GD19335@pendragon.ideasonboard.com
|
|
Compiling AMD GPU drivers displays two warnings:
drivers/gpu/drm/scheduler/sched_main.c:738: warning: Function parameter or member 'file' not described in 'drm_sched_job_add_syncobj_dependency'
drivers/gpu/drm/scheduler/sched_main.c:738: warning: Excess function
parameter 'file_private' description in
'drm_sched_job_add_syncobj_dependency'
Get rid of them by renaming the variable name on the function description
Signed-off-by: Caio Novais <caionovais@usp.br>
Link: https://lore.kernel.org/r/20230325131532.6356-1-caionovais@usp.br
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
|
|
Wrong register address is used to read the SAG block time. Fix
the register address according to the bspec.
Bspec: 64608
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323114426.41136-3-vinod.govindapillai@intel.com
|
|
Wrong offsets are calculated to read QGV point registers. Fix it
to read from the correct registers.
Bspec: 64602
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323114426.41136-2-vinod.govindapillai@intel.com
|
|
There are 2 banks on it6505, and when writing to different bank,
REG_BANK_SEL needs to be set to the targeted bank. The current code set
this additionally, which causes a race condition when a process is
writing bank 0 registers while another process set the bank to 1. Set
ranges in regmap config so the regmap API would handle the bank changes.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230327044804.3657551-1-hsinyi@chromium.org
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are a small set of USB and Thunderbolt driver fixes for reported
problems and a documentation update, for 6.3-rc4.
Included in here are:
- documentation update for uvc gadget driver
- small thunderbolt driver fixes
- cdns3 driver fixes
- dwc3 driver fixes
- dwc2 driver fixes
- chipidea driver fixes
- typec driver fixes
- onboard_usb_hub device id updates
- quirk updates
All of these have been in linux-next with no reported problems"
* tag 'usb-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (30 commits)
usb: dwc2: fix a race, don't power off/on phy for dual-role mode
usb: dwc2: fix a devres leak in hw_enable upon suspend resume
usb: chipidea: core: fix possible concurrent when switch role
usb: chipdea: core: fix return -EINVAL if request role is the same with current role
thunderbolt: Rename shadowed variables bit to interrupt_bit and auto_clear_bit
thunderbolt: Disable interrupt auto clear for rings
thunderbolt: Use const qualifier for `ring_interrupt_index`
usb: gadget: Use correct endianness of the wLength field for WebUSB
uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS583Gen 2
usb: cdnsp: changes PCI Device ID to fix conflict with CNDS3 driver
usb: cdns3: Fix issue with using incorrect PCI device function
usb: cdnsp: Fixes issue with redundant Status Stage
MAINTAINERS: make me a reviewer of USB/IP
thunderbolt: Use scale field when allocating USB3 bandwidth
thunderbolt: Limit USB3 bandwidth of certain Intel USB4 host routers
thunderbolt: Call tb_check_quirks() after initializing adapters
thunderbolt: Add missing UNSET_INBOUND_SBTX for retimer access
thunderbolt: Fix memory leak in margining
usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host"
docs: usb: Add documentation for the UVC Gadget
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Fix a corner case where vruntime of a task is not being sanitized
* tag 'sched_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Sanitize vruntime of entity being migrated
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Properly clear perf event status tracking in the AMD perf event
overflow handler
* tag 'perf_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/amd/core: Always clear status for idx
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Borislav Petkov:
- Do the delayed RCU wakeup for kthreads in the proper order so that
former doesn't get ignored
- A noinstr warning fix
* tag 'core_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry/rcu: Check TIF_RESCHED _after_ delayed RCU wake-up
entry: Fix noinstr warning in __enter_from_user_mode()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a AMX ptrace self test
- Prevent a false-positive warning when retrieving the (invalid)
address of dynamic FPU features in their init state which are not
saved in init_fpstate at all
- Randomize per-CPU entry areas only when KASLR is enabled
* tag 'x86_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/x86/amx: Add a ptrace test
x86/fpu/xstate: Prevent false-positive warning in __copy_xstate_uabi_buf()
x86/mm: Do not shuffle CPU entry areas without KASLR
|
|
Pull cifs client fixes from Steve French:
"Twelve cifs/smb3 client fixes (most also for stable)
- forced umount fix
- fix for two perf regressions
- reconnect fixes
- small debugging improvements
- multichannel fixes"
* tag 'smb3-client-fixes-6.3-rc3' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix unusable share after force unmount failure
cifs: fix dentry lookups in directory handle cache
smb3: lower default deferred close timeout to address perf regression
cifs: fix missing unload_nls() in smb2_reconnect()
cifs: avoid race conditions with parallel reconnects
cifs: append path to open_enter trace event
cifs: print session id while listing open files
cifs: dump pending mids for all channels in DebugData
cifs: empty interface list when server doesn't support query interfaces
cifs: do not poll server interfaces too regularly
cifs: lock chan_lock outside match_session
cifs: check only tcon status on tcon related functions
|
|
Move the one-time RPMh setup to a6xx_gmu_init(). To get rid of the hack
for one-time init vs start, add in an extra a6xx_rpmh_stop() at the end
of the init sequence.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527854/
Link: https://lore.kernel.org/r/20230320144356.803762-15-robdclark@gmail.com
|
|
These allocations are only done the first (successful) time through
hw_init() so they won't actually happen in the job_run() path. But
lockdep doesn't know this. So dis-entangle them from the hw_init()
path.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527852/
Link: https://lore.kernel.org/r/20230320144356.803762-14-robdclark@gmail.com
|
|
It is already a no-op, since we've already loaded the fw from
adreno_load_gpu(), so drop the redundant call.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527849/
Link: https://lore.kernel.org/r/20230320144356.803762-13-robdclark@gmail.com
|
|
Avoid allocation under idr_lock, to prevent deadlock against the
job_free() path (which runs on same thread as job_run(), which makes
it also part of the fence-signaling path.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527847/
Link: https://lore.kernel.org/r/20230320144356.803762-12-robdclark@gmail.com
|
|
Needed to idr_preload() which returns with preemption disabled.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527846/
Link: https://lore.kernel.org/r/20230320144356.803762-11-robdclark@gmail.com
|
|
Now that everything that controls which LRU an obj lives in *except* the
backing pages is protected by the LRU lock, add a special path to unpin
in the job_run() path, where we are assured that we already have backing
pages and will not be racing against eviction (because the GEM object's
dma_resv contains the fence that will be signaled when the submit/job
completes).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527845/
Link: https://lore.kernel.org/r/20230320144356.803762-10-robdclark@gmail.com
|
|
Since the LRU lock is already acquired when moving an obj between LRUs,
we can use it to protect pin_count and madv, without any significant
change in locking (ie. it just expands the scope of the lock by a hand-
ful of instructions). This prepares the way to decrement the pin_count
in the job_run() path without needing to hold the obj lock, to avoid a
potential deadlock (or rather stall) caused by the fence-signaling path
(job_run()) blocking on shrinker/reclaim. (Only a stall because the
wait for fence signaling wait_for_idle() is not infinite.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527843/
Link: https://lore.kernel.org/r/20230320144356.803762-9-robdclark@gmail.com
|
|
Just code-motion.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527841/
Link: https://lore.kernel.org/r/20230320144356.803762-8-robdclark@gmail.com
|
|
Export the locked version or lru's move_tail().
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527835/
Link: https://lore.kernel.org/r/20230320144356.803762-7-robdclark@gmail.com
|
|
vmap'ing is just pinning in disguise. So treat it as such and simplify
the LRU tracking.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527837/
Link: https://lore.kernel.org/r/20230320144356.803762-6-robdclark@gmail.com
|
|
We need to use the inuse count to track that a BO is pinned until
we have the hw_fence. But we want to remove the obj lock from the
job_run() path as this could deadlock against reclaim/shrinker
(because it is blocking the hw_fence from eventually being signaled).
So split that tracking out into a per-vma lock with narrower scope.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527839/
Link: https://lore.kernel.org/r/20230320144356.803762-5-robdclark@gmail.com
|
|
Stop open coding VMA construction, which will be needed in the next
commit. And since the VMA already has a ptr to the adress space, stop
passing that around everywhere. (Also, an aspace always has an mmu so
we can drop a couple pointless NULL checks.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527833/
Link: https://lore.kernel.org/r/20230320144356.803762-4-robdclark@gmail.com
|
|
The flags are only accessed (1) when submit is constructed, before
enqueuing to gpu sched (ie. when still visible to only the task calling
the submit ioctl), (2) here, where we own a reference to the submit and
are serialized on the gpu sched thread, and (3) after the submit is
retired and last reference is dropped, which is serialized on the
submit's reference count. Hence locking is unneeded here.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527830/
Link: https://lore.kernel.org/r/20230320144356.803762-3-robdclark@gmail.com
|
|
Avoid allocating memory in job_run() by pre-allocating the hw_fence.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527832/
Link: https://lore.kernel.org/r/20230320144356.803762-2-robdclark@gmail.com
|
|
The drmm_encoder_alloc() function returns error pointers. It never
returns NULL. Fix the check accordingly.
Fixes: 7a1adbd23990 ("drm: rcar-du: Use drmm_encoder_alloc() to manage encoder")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The DORCR register controls the routing of clocks and data between DU
channels within a group. For groups that contain a single channel,
there's no routing option to control, and some fields of the register
are then reserved. On Gen2 those reserved fields are documented as
required to be set to 0, while on Gen3 and newer the PG1T, DK1S and PG1D
reserved fields must be set to 1.
The DU driver initializes the DORCR register in rcar_du_group_setup(),
where it ignores the PG1T, DK1S and PG1D, and then configures those
fields to the correct value in rcar_du_group_set_routing(). This hasn't
been shown to cause any issue, but prevents certifying that the driver
complies with the documentation in safety-critical use cases.
As there is no reasonable change that the documentation will be updated
to clarify that those reserved fields can be written to 0 temporarily
before starting the hardware, make sure that the registers are always
set to valid values.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The DORCR fields were documented in the R-Car H1 datasheet with 1-based
named, and then got renamed to 0-based in Gen2. The 0-based names are
used for Gen3 and Gen4, making H1 an outlier. Rename the field macros to
make them 0-based, in order to increase readability of the code when
comparing it with the documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
When the input to a DU channel comes from a VSP, the DU doesn't perform
any blending operation. Select XRGB8888 instead of ARGB8888 to ensure
that the corresponding registers don't get written with invalid values.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The ESCR and OTAR registers are not present in all DU channels on Gen3
SoCs. ESCR only exists in channels that can be routed to an LVDS or
DPAD, and OTAR in channels that can be routed to a DPAD. Skip writing
those registers for other channels. This replaces the DU gen check, as
Gen4 doesn't have LVDS or DPAD outputs.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
On R-Car D3 and E3, the LVDS encoder provides the dot (pixel) clock to
the DU, regardless of whether the LVDS output is used or not. When using
the DPAD (RGB) output, the DU driver thus enables and disables the LVDS
PLL manually, while when using the LVDS output, it lets the LVDS bridge
driver handle the PLL configuration internally as part of the atomic
enable and disable operations.
This causes an issue when using the LVDS output. As bridges are disabled
before CRTCs, the current implementation violates the enable/disable
sequences documented in the hardware datasheet, which requires the dot
clock to be enabled before the CRTC is started and disabled after it
gets stopped.
Fix the problem by enabling/disabling the LVDS PLL manually from the DU
regardless of which output is used, and skipping the PLL handling in the
LVDS bridge atomic enable and disable operations.
This is however not enough. Disabling the LVDS encoder while leaving the
PLL on still results in a vertical blanking wait timeout when disabling
the DU. Investigation showed that the culprit is the LVEN bit. For an
unclear reason, clearing the bit when disabling the LVDS encoder blocks
vertical blanking interrupts. We thus have to delay disabling the whole
LVDS encoder, not just disabling the PLL, until the DU is disabled.
We could split the LVDS disable sequence by clearing the LVRES bit in
the LVDS bridge atomic disable handler, and delaying the rest of the
operations, in order to disable the LVDS output at bridge atomic disable
time, before stopping the CRTC. This would make the code more complex,
without a clear benefit, so keep the implementation simple(r).
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
|
|
To prepare for a rework of the LVDS disable code, which will need to be
called from rcar_lvds_pclk_disable(), move the LVDS enable code,
currently stored in the __rcar_lvds_atomic_enable() function, to a
separate code section separate from bridge operations. It will be then
extended with the LVDS disable code.
As part of this rework the __rcar_lvds_atomic_enable() function is
renamed to rcar_lvds_enable() to more clearly indicate its purpose.
No functional change intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
|
|
When disabling the companion bridge in rcar_lvds_atomic_disable(),
there's no need to go through the bridge's operations to call
.atomic_disable(). Call rcar_lvds_atomic_disable() on the companion
directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix a crash when using NFS with krb5p
* tag 'nfsd-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix a crash in gss_krb5_checksum()
|
|
Pull yet more xfs bug fixes from Darrick Wong:
"The first bugfix addresses a longstanding problem where we use the
wrong file mapping cursors when trying to compute the speculative
preallocation quantity. This has been causing sporadic crashes when
alwayscow mode is engaged.
The other two fixes correct minor problems in more recent changes.
- Fix the new allocator tracepoints because git am mismerged the
changes such that the trace_XXX got rebased to be in function YYY
instead of XXX
- Ensure that the perag AGFL_RESET state is consistent with whatever
we've just read off the disk
- Fix a bug where we used the wrong iext cursor during a write begin"
* tag 'xfs-6.3-fixes-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix mismerged tracepoints
xfs: clear incore AGFL_RESET state if it's not needed
xfs: pass the correct cursor to xfs_iomap_prealloc_size
|
|
Pull xfs percpu counter fixes from Darrick Wong:
"We discovered a filesystem summary counter corruption problem that was
traced to cpu hot-remove racing with the call to percpu_counter_sum
that sets the free block count in the superblock when writing it to
disk. The root cause is that percpu_counter_sum doesn't cull from
dying cpus and hence misses those counter values if the cpu shutdown
hooks have not yet run to merge the values.
I'm hoping this is a fairly painless fix to the problem, since the
dying cpu mask should generally be empty. It's been in for-next for a
week without any complaints from the bots.
- Fix a race in the percpu counters summation code where the
summation failed to add in the values for any CPUs that were dying
but not yet dead. This fixes some minor discrepancies and incorrect
assertions when running generic/650"
* tag 'xfs-6.3-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
pcpcntr: remove percpu_counter_sum_all()
fork: remove use of percpu_counter_sum_all
pcpcntrs: fix dying cpu summation race
cpumask: introduce for_each_cpu_or
|
|
Pull xfs fixes from Darrick Wong:
"This batch started with some debugging enhancements to the new
allocator refactoring that we put in 6.3-rc1 to assist developers in
rebasing their dev branches.
As for more serious code changes -- there's a bug fix to make the
lockless allocator scan the whole filesystem before resorting to the
locking allocator. We're also adding a selftest for the venerable
directory/xattr hash function to make sure that it produces consistent
results so that we can address any fallout as soon as possible.
- Add a few debugging assertions so that people (me) trying to port
code to the new allocator functions don't mess up the caller
requirements
- Relax some overly cautious lock ordering enforcement in the new
allocator code, which means that file allocations will locklessly
scan for the best space they can get before backing off to the
traditional lock-and-really-get-it behavior
- Add tracepoints to make it easier to trace the xfs allocator
behavior
- Actually test the dir/xattr hash algorithm to make sure it produces
consistent results across all the platforms XFS supports"
* tag 'xfs-6.3-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: test dir/attr hash when loading module
xfs: add tracepoints for each of the externally visible allocators
xfs: walk all AGs if TRYLOCK passed to xfs_alloc_vextent_iterate_ags
xfs: try to idiot-proof the allocators
|
