| Age | Commit message (Collapse) | Author |
|---|
|
Removes cq_enet_wq_desc_dec, not needed anymore.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-5-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Enables getting from hw all the supported rq cq sizes and
uses the highest supported cq size.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-4-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Adds the defines for 32 and 64 byte receive queue completion queue
descriptors.
Adds devcmd define to get rq cq descriptor size/s supported by hw.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-3-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Separates enic rx path from generic vnic api. Removes some
complexity of doign enic callbacks through vnic api in rx.
This is in preparation for enabling enic extended cq which
applies only to enic rx path.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-2-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Moves cq_enet_rq_desc_dec from cq_enet_desc.h to enic_rq.c.
This is in preparation for enic extended completion queue
enabling.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: John Daley <johndale@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-1-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of using a custom script to detect and fail on undefined
references, use --no-undefined for all VDSO linker invocations.
Drop the now unused checkundef.sh script.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20250306-vdso-checkundef-v2-2-a26cc315fd73@linutronix.de
|
|
Instead of using a custom script to detect and fail on undefined
references, use --no-undefined for all VDSO linker invocations.
Drop the now unused checkundef.sh script.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250306-vdso-checkundef-v2-1-a26cc315fd73@linutronix.de
|
|
The original code used if statements to update discovered VPD pages when
found. This had the side-effect of not breaking the loop when a page was
found.
Use an idiomatic switch statement instead.
Signed-off-by: Chaohai Chen <wdhh6@aliyun.com>
Link: https://lore.kernel.org/r/20250226065802.234144-1-wdhh6@aliyun.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Geert Uytterhoeven <geert+renesas@glider.be> says:
Hi all,
Initialization of the UFS controller on R-Car S4-8 ES1.0 requires only
static values. However, other UFS controller variants (R-Car S4-8 ES 1.2)
require dynamic values, like those obtained from E-FUSE, and downloading
firmware.
Hence this patch series refactors the initialization code to prepare for
this, and adds support for the UFS controller on R-Car S4-8 ES1.2.
The accompanying DTS change is available at [1].
This has been tested on:
- Renesas Spider with R-Car S4-8 ES1.0 (broken before/after),
- Renesas S4 Starter Kit with R-Car S4-8 ES1.2 (works after).
Thanks for your comments!
[1] "[PATCH] arm64: dts: renesas: r8a779f4: Add UFS tuning parameters in
E-FUSE"
https://lore.kernel.org/3e4fca228eb049d54a1ae520104558505dbdf803.1741179629.git.geert+renesas@glider.be
[2] "[PATCH v2 0/5] scsi: ufs: renesas: Refactor code for other UFS
controller"
https://lore.kernel.org/20240709023550.1750333-1-yoshihiro.shimoda.uh@renesas.com
[3] "[PATCH 0/5] scsi: ufs: renesas: Refactor code for other UFS
controller"
https://lore.kernel.org/20240708120931.1703956-1-yoshihiro.shimoda.uh@renesas.com
Link: https://lore.kernel.org/r/cover.1741179611.git.geert+renesas@glider.be
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add initialization code for R-Car S4-8 ES1.2 to improve transfer stability.
Using the new code requires downloading firmware and reading calibration
data from E-FUSE. If either fails, the driver falls back to the old
initialization code.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Co-developed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/97d83709495c764b2456d4d25846f5f48197cad0.1741179611.git.geert+renesas@glider.be
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since some settings can be reused on other UFS controller (R-Car S4-8
ES1.2), add reusable functions.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/446d67b751a96645799de3aeefec539735aa78c8.1741179611.git.geert+renesas@glider.be
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Extract specific PHY setting of the 0x10a[df] registers into a new
function.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/110eafd1ee24f9db0285a5e2bca224e35962268a.1741179611.git.geert+renesas@glider.be
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After refactoring the code, ufs_renesas_reg_control() is no longer needed,
because all operations are simple and can be called directly. Remove the
ufs_renesas_reg_control() helper function, and call udelay() directly.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/69500e4c18be1ca1de360f9e797e282ffef04004.1741179611.git.geert+renesas@glider.be
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for returning read register values from
ufs_renesas_reg_control(), so ufs_renesas_set_phy() can use the existing
ufs_renesas_write_phy() helper. Remove the now unused code to save to,
set, and restore from a static array inside ufs_renesas_reg_control().
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/9fa240a9dc0308d6675138f8434eccb77f051650.1741179611.git.geert+renesas@glider.be
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since initialization of the UFS controller on R-Car S4-8 ES1.0 requires
only static values, the driver uses initialization data stored in the const
ufs_param[] array. However, other UFS controller variants (R-Car S4-8
ES1.2) require dynamic values, like those obtained from E-FUSE. Refactor
the initialization code to prepare for this.
This also reduces kernel size by almost 30 KiB.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/3520e27ac7ff512de6508f630eee3c1689a7c73d.1741179611.git.geert+renesas@glider.be
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
On R-Car S4-8 ES1.2, the E-FUSE block contains PLL and AFE tuning
parameters for the Universal Flash Storage controller. Document the
related NVMEM properties, and update the example.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2f337169f8183d48b7d94ee13565fea804aade84.1741179611.git.geert+renesas@glider.be
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add Task Abort support to handle SCSI command timeouts, ensuring recovery
and cleanup of timed-out commands. This completes the error handling
framework for mpi3mr driver, which already includes device reset, target
reset, bus reset, and host reset.
Co-developed-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250304191453.12994-1-chandrakanth.patil@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The log statement reports the packet status code as the hv status code
which causes confusion when debugging as "hv" might refer to a hypervisor,
and sometimes to the host part of the Hyper-V virtualization stack.
Fix the name of the datum being logged to clearly indicate the component
reporting the error. Also log it in hexadecimal everywhere for consistency.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250304000940.9557-2-romank@linux.microsoft.com
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Most of the module parameters are only used locally in the same C file; so
static them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250309145044.38586-1-linux@treblig.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Most of the module parameters are only used locally in the same C file; so
static them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250309143348.32896-1-linux@treblig.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The original support for incrementally consumed buffers didn't allow it
to be used with bundles, with the assumption being that incremental
buffers are generally larger, and hence there's less of a nedd to
support it.
But that assumption may not be correct - it's perfectly viable to use
smaller buffers with incremental consumption, and there may be valid
reasons for an application or framework to do so.
As there's really no need to explicitly disable bundles with
incrementally consumed buffers, allow it. This actually makes the peek
side cheaper and simpler, with the completion side basically the same,
just needing to iterate for the consumed length.
Reported-by: Norman Maurer <norman_maurer@apple.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 2a51c327d4a4a2eb62d67f4ea13a17efd0f25c5c.
The kernel registered bvecs do use the iov_iter_advance() API, so we
can't rely on this simplification anymore.
Fixes: 27cb27b6d5ea40 ("io_uring: add support for kernel registered bvecs")
Reported-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250310184825.569371-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add UBLK_TEST_QUIET, so we can print test result(PASS/SKIP/FAIL) only.
Also always run from test script's current directory, then the same test
script can be started from other work directory.
This way helps a lot to reuse this test source code and scripts for
other projects(liburing, blktests, ...)
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-12-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add stress_test_01 for running IO vs. killing ublk server, so io_uring exit &
cancel code path can be covered, same with ublk's cancel code path.
Especially IO buffer lifetime is one big thing for ublk zero copy, the added
test can verify if this area works as expected.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-11-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add stress_test_01 for running IO vs. removing device for verifying that
ublk device removal can work as expected when heavy IO workloads are in
progress.
null, loop and loop/zc are covered in this tests.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-10-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Load ublk_drv module in _prep_test(), and unload it in _cleanup_test(),
so that test can always be done in consistent state.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-9-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move zero copy feature check into _add_ublk_dev() since we will have
more tests which requires to cover zero copy.
Then one check function of _check_add_dev() has to be added for dealing
with cleanup since '_add_ublk_dev()' is run in sub-shell, and we can't
exit from it to terminal shell.
Meantime always return error code from _add_ublk_dev().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-8-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
More devices can be created in single tests, so simply remove all
ublk devices in _cleanup_test(), meantime remove the ${dev_id} argument
of _cleanup_test().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add shellcheck, meantime fixes all warnings.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The argument of '-a' doesn't follow any value, so fix it by putting it
with '-z' together.
Fixes: bedc9cbc5f97 ("selftests: ublk: add ublk zero copy test")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250303124324.3563605-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Matthieu Baerts says:
====================
mptcp: pm: code reorganisation
Before this series, the PM code was dispersed in different places:
- pm.c had common code for all PMs.
- pm_netlink.c was initially only about the in-kernel PM, but ended up
also getting exported common helpers, callbacks used by the different
PMs, NL events for PM userspace daemon, etc. quite confusing.
- pm_userspace.c had userspace PM only code, but it was using "specific"
in-kernel PM helpers according to their names.
To clarify the code, a reorganisation is suggested here, only by moving
code around, and small helper renaming to avoid confusions:
- pm_netlink.c now only contains common PM generic Netlink code:
- PM events: this code was already there
- shared helpers around Netlink code that were already there as well
- shared Netlink commands code from pm.c
- pm_kernel.c now contains only code that is specific to the in-kernel
PM. Now all functions are either called from:
- pm.c: events coming from the core, when this PM is being used
- pm_netlink.c: for shared Netlink commands
- mptcp_pm_gen.c: for Netlink commands specific to the in-kernel PM
- sockopt.c: for the exported counters per netns
- pm.c got many code from pm_netlink.c:
- helpers used from both PMs and not linked to Netlink
- callbacks used by different PMs, e.g. ADD_ADDR management
- some helpers have been renamed to remove the '_nl' prefix, and some
have been marked as 'static'.
- protocol.h has been updated accordingly:
- some helpers no longer need to be exported
- new ones needed to be exported: they have been prefixed if needed.
The code around the PM is now less confusing, which should help for the
maintenance in the long term, and the introduction of a PM Ops.
This will certainly impact future backports, but because other cleanups
have already done recently, and more are coming to ease the addition of
a new path-manager controlled with BPF (struct_ops), doing that now
seems to be a good time. Also, many issues around the PM have been fixed
a few months ago while increasing the code coverage in the selftests, so
such big reorganisation can be done with more confidence now.
Note that checkpatch, when used with --max-line-length=80, will complain
about lines being over the 80 limits, but these warnings were already
there before moving the code around.
Also, patch 1 is not directly related to the code reorganisation, but it
was a remaining cleanup that we didn't upstream before, because it was
conflicting with another patch that has been sent for inclusion to the
net tree.
====================
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-0-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before this patch, the PM code was dispersed in different places:
- pm.c had common code for all PMs, but also Netlink specific code that
will not be needed with the future BPF path-managers.
- pm_netlink.c had common Netlink code.
To clarify the code, a reorganisation is suggested here, only by moving
code around, and small helper renaming to avoid confusions:
- pm_netlink.c now only contains common PM Netlink code:
- PM events: this code was already there
- shared helpers around Netlink code that were already there as well
- shared Netlink commands code from pm.c
- pm.c now no longer contain Netlink specific code.
- protocol.h has been updated accordingly:
- mptcp_nl_fill_addr() no longer need to be exported.
The code around the PM is now less confusing, which should help for the
maintenance in the long term.
This will certainly impact future backports, but because other cleanups
have already done recently, and more are coming to ease the addition of
a new path-manager controlled with BPF (struct_ops), doing that now
seems to be a good time. Also, many issues around the PM have been fixed
a few months ago while increasing the code coverage in the selftests, so
such big reorganisation can be done with more confidence now.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-15-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before this patch, the PM code was dispersed in different places:
- pm.c had common code for all PMs
- pm_netlink.c was supposed to be about the in-kernel PM, but also had
exported common Netlink helpers, NL events for PM userspace daemons,
etc. quite confusing.
To clarify the code, a reorganisation is suggested here, only by moving
code around to avoid confusions:
- pm_netlink.c now only contains common PM Netlink code:
- PM events: this code was already there
- shared helpers around Netlink code that were already there as well
- more shared Netlink commands code from pm.c will come after
- pm_kernel.c now contains only code that is specific to the in-kernel
PM. Now all functions are either called from:
- pm.c: events coming from the core, when this PM is being used
- pm_netlink.c: for shared Netlink commands
- mptcp_pm_gen.c: for Netlink commands specific to the in-kernel PM
- sockopt.c: for the exported counters per netns
- (while at it, a useless 'return;' spot by checkpatch at the end of
mptcp_pm_nl_set_flags_all, has been removed)
The code around the PM is now less confusing, which should help for the
maintenance in the long term.
This will certainly impact future backports, but because other cleanups
have already done recently, and more are coming to ease the addition of
a new path-manager controlled with BPF (struct_ops), doing that now
seems to be a good time. Also, many issues around the PM have been fixed
a few months ago while increasing the code coverage in the selftests, so
such big reorganisation can be done with more confidence now.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-14-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before this patch, the PM code was dispersed in different places:
- pm.c had common code for all PMs
- pm_netlink.c was supposed to be about the in-kernel PM, but also had
exported common helpers, callbacks used by the different PMs, NL
events for PM userspace daemon, etc. quite confusing.
- pm_userspace.c had userspace PM only code, but using specific
in-kernel PM helpers
To clarify the code, a reorganisation is suggested here, only by moving
code around, and (un)exporting functions:
- helpers used from both PMs and not linked to Netlink
- callbacks used by different PMs, e.g. ADD_ADDR management
- some helpers have been marked as 'static'
- protocol.h has been updated accordingly
- (while at it, a needless if before a kfree(), spot by checkpatch in
mptcp_remove_anno_list_by_saddr(), has been removed)
The code around the PM is now less confusing, which should help for the
maintenance in the long term.
This will certainly impact future backports, but because other cleanups
have already done recently, and more are coming to ease the addition of
a new path-manager controlled with BPF (struct_ops), doing that now
seems to be a good time. Also, many issues around the PM have been fixed
a few months ago while increasing the code coverage in the selftests, so
such big reorganisation can be done with more confidence now.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-13-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In prevision to another change importing all generic PM helpers from
pm_netlink.c to there.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-12-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a following commit, the 'remote_address' helper will need to be used
from different files.
It is then exported, and prefixed with 'mptcp_', similar to
'mptcp_local_address'.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-11-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To make it clear what actions are in-kernel PM specific and which ones
are not and done for all PMs, e.g. sending ADD_ADDR and close associated
subflows when a RM_ADDR is received.
The behavioural is changed a bit: MPTCP_PM_ADD_ADDR_RECEIVED is now
treated after MPTCP_PM_ADD_ADDR_SEND_ACK and MPTCP_PM_RM_ADDR_RECEIVED,
but that should not change anything in practice.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-10-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When destroying an MPTCP socket, some userspace PM specific code was
called from mptcp_destroy_common() in protocol.c. That feels wrong, and
it is the only case.
Instead, the core now calls mptcp_pm_destroy() from pm.c which is now in
charge of cleaning the announced addresses list, and ask the different
PMs to do extra cleaning if needed, e.g. the userspace PM, if used, will
clean the local addresses list.
While at it, the userspace PM specific helper has been prefixed with
'mptcp_userspace_pm_' like the other ones.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-9-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. Here, '_pm' was missing from 'mptcp_nl_set_flags'.
Add '_pm' to be similar to others, and add '_all' to avoid confusions
witih the global 'mptcp_pm_nl_set_flags'.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-8-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_is_init_remote_addr' is not
specific to this PM: it is called from pm.c for both the in-kernel and
userspace PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-7-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_subflow_chk_stale' is not specific
to this PM: it is called from pm.c for both the in-kernel and userspace
PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-6-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_rm_addr_received' is not specific
to this PM: it is called from the PM worker, and used by both the
in-kernel and userspace PMs. The helper has been renamed to
'mptcp_pm_rm_addr_recv' instead of '_received' to avoid confusions with
the one from pm.c.
mptcp_pm_nl_rm_addr_or_subflow', and 'mptcp_pm_nl_rm_subflow_received'
have been updated too for the same reason.
To avoid confusions, the '_nl' bit has been removed from the name.
While at it, the in-kernel PM specific code has been move from
mptcp_pm_rm_addr_or_subflow to a new dedicated helper, clearer.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-5-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_work' is not specific to this PM:
it is called from the core to call helpers, some of them needed by both
the in-kernel and userspace PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
Also used 'worker' instead of 'work', similar to protocol.c's worker.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-4-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_mp_prio_send_ack()' is not
specific to this PM: it is used by both the in-kernel and userspace PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-3-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_addr_send_ack()' is not specific
to this PM: it is used by both the in-kernel and userspace PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-2-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The following code in mptcp_userspace_pm_get_local_id() that assigns "skc"
to "new_entry" is not allowed in BPF if we use the same code to implement
the get_local_id() interface of a BFP path manager:
memset(&new_entry, 0, sizeof(struct mptcp_pm_addr_entry));
new_entry.addr = *skc;
new_entry.addr.id = 0;
new_entry.flags = MPTCP_PM_ADDR_FLAG_IMPLICIT;
To solve the issue, this patch moves this assignment to "new_entry" forward
to mptcp_pm_get_local_id(), and then passing "new_entry" as a parameter to
both mptcp_pm_nl_get_local_id() and mptcp_userspace_pm_get_local_id().
No behavioural changes intended.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-1-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Martin has left AMD and no longer works on the sfc driver.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250307154731.211368-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Taehee Yoo says:
====================
eth: bnxt: fix several bugs in the bnxt module
The first fixes setting incorrect skb->truesize.
When xdp-mb prog returns XDP_PASS, skb is allocated and initialized.
Currently, The truesize is calculated as BNXT_RX_PAGE_SIZE *
sinfo->nr_frags, but sinfo->nr_frags is flushed by napi_build_skb().
So, it stores sinfo before calling napi_build_skb() and then use it
for calculate truesize.
The second fixes kernel panic in the bnxt_queue_mem_alloc().
The bnxt_queue_mem_alloc() accesses rx ring descriptor.
rx ring descriptors are allocated when the interface is up and it's
freed when the interface is down.
So, if bnxt_queue_mem_alloc() is called when the interface is down,
kernel panic occurs.
This patch makes the bnxt_queue_mem_alloc() return -ENETDOWN if rx ring
descriptors are not allocated.
The third patch fixes kernel panic in the bnxt_queue_{start | stop}().
When a queue is restarted bnxt_queue_{start | stop}() are called.
These functions set MRU to 0 to stop packet flow and then to set up the
remaining things.
MRU variable is a member of vnic_info[] the first vnic_info is for
default and the second is for ntuple.
The first vnic_info is always allocated when interface is up, but the
second is allocated only when ntuple is enabled.
(ethtool -K eth0 ntuple <on | off>).
Currently, the bnxt_queue_{start | stop}() access
vnic_info[BNXT_VNIC_NTUPLE] regardless of whether ntuple is enabled or
not.
So kernel panic occurs.
This patch make the bnxt_queue_{start | stop}() use bp->nr_vnics instead
of BNXT_VNIC_NTUPLE.
The fourth patch fixes a warning due to checksum state.
The bnxt_rx_pkt() checks whether skb->ip_summed is not CHECKSUM_NONE
before updating ip_summed. if ip_summed is not CHECKSUM_NONE, it WARNS
about it. However, the bnxt_xdp_build_skb() is called in XDP-MB-PASS
path and it updates ip_summed earlier than bnxt_rx_pkt().
So, in the XDP-MB-PASS path, the bnxt_rx_pkt() always warns about
checksum.
Updating ip_summed at the bnxt_xdp_build_skb() is unnecessary and
duplicate, so it is removed.
The fifth patch fixes a kernel panic in the
bnxt_get_queue_stats{rx | tx}().
The bnxt_get_queue_stats{rx | tx}() callback functions are called when
a queue is resetting.
These internally access rx and tx rings without null check, but rings
are allocated and initialized when the interface is up.
So, these functions are called when the interface is down, it
occurs a kernel panic.
The sixth patch fixes memory leak in queue reset logic.
When a queue is resetting, tpa_info is allocated for the new queue and
tpa_info for an old queue is not used anymore.
So it should be freed, but not.
The seventh patch makes net_devmem_unbind_dmabuf() ignore -ENETDOWN.
When devmem socket is closed, net_devmem_unbind_dmabuf() is called to
unbind/release resources.
If interface is down, the driver returns -ENETDOWN.
The -ENETDOWN return value is not an actual error, because the interface
will release resources when the interface is down.
So, net_devmem_unbind_dmabuf() needs to ignore -ENETDOWN.
The last patch adds XDP testcases to
tools/testing/selftests/drivers/net/ping.py.
====================
Link: https://patch.msgid.link/20250309134219.91670-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ping.py has 3 cases, test_v4, test_v6 and test_tcp.
But these cases are not executed on the XDP environment.
So, it adds XDP environment, existing tests(test_v4, test_v6, and
test_tcp) are executed too on the below XDP environment.
So, it adds XDP cases.
1. xdp-generic + single-buffer
2. xdp-generic + multi-buffer
3. xdp-native + single-buffer
4. xdp-native + multi-buffer
5. xdp-offload
It also makes test_{v4 | v6 | tcp} sending large size packets. this may
help to check whether multi-buffer is working or not.
Note that the physical interface may be down and then up when xdp is
attached or detached.
This takes some period to activate traffic. So sleep(10) is
added if the test interface is the physical interface.
netdevsim and veth type interfaces skip sleep.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250309134219.91670-9-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When devmem socket is closed, netdev_rx_queue_restart() is called to
reset queue by the net_devmem_unbind_dmabuf(). But callback may return
-ENETDOWN if the interface is down because queues are already freed
when the interface is down so queue reset is not needed.
So, it should not warn if the return value is -ENETDOWN.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250309134219.91670-8-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
