| Age | Commit message (Collapse) | Author |
|---|
|
"wakeup-source" property describes a device which has wakeup capability
but should not force this device as a wakeup source.
Fixes: 48b41c5e2de6 ("clocksource: Add Low Power STM32 timers driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Rule: add
Link: https://lore.kernel.org/stable/20250306083407.2374894-1-fabrice.gasnier%40foss.st.com
Link: https://lore.kernel.org/r/20250306102501.2980153-1-fabrice.gasnier@foss.st.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Fixed a spelling issue in driver /s/processer/processor/
Signed-off-by: Anindya Sundar Gayen <anindya.sg@samsung.com>
Link: https://lore.kernel.org/r/20250228131138.9208-1-anindya.sg@samsung.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add support for power management on STM32 LPTIMER clocksource driver:
- Upon clockevents_suspend(), shutdown the LPTIMER, and balance the
clk_prepare_enable() from the probe routine.
- Upon clockevents_resume(), restore the prescaler that may have been lost
during low power mode, and restore the clock.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250224172101.3448398-1-fabrice.gasnier@foss.st.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Whilst having a new multicore timer that differs from the old designs in
functionality and registers (marked as MCTv2 in vendor kernels),
Exynos2200 also keeps an additional multicore timer connected over PERIS
that reuses the same design as older exynos socs.
Add a compatible for the legacy multicore timer of Exynos2200. Rather
than differentiating it based on the block version, mark it as the
one connected over PERIS.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250215123922.163630-1-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add a dedicated compatible for the MCT of the Exynos 990 SoC.
The design for the timer is reused from previous SoCs.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20250104-cmu-nodes-v1-1-ae8af253bc25@mentallysanemainliners.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20250107131024.246561-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Starting with the upcoming Rust 1.86.0 (to be released 2025-04-03),
Clippy warns:
error: doc list item overindented
--> drivers/gpu/drm/drm_panic_qr.rs:914:5
|
914 | /// will be encoded as binary segment, otherwise it will be encoded
| ^^^ help: try using ` ` (2 spaces)
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_overindented_list_items
The overindentation is slightly hard to notice, since all the items
start with a backquote that makes it look OK, but it is there.
Thus fix it.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Fixes: cb5164ac43d0 ("drm/panic: Add a QR code panic screen")
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250301231602.917580-2-ojeda@kernel.org
|
|
Starting with the upcoming Rust 1.86.0 (to be released 2025-04-03),
Clippy warns:
error: manually reimplementing `div_ceil`
--> drivers/gpu/drm/drm_panic_qr.rs:548:26
|
548 | let pad_offset = (offset + 7) / 8;
| ^^^^^^^^^^^^^^^^ help: consider using `.div_ceil()`: `offset.div_ceil(8)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_div_ceil
And similarly for `stride`. Thus apply the suggestion to both.
The behavior (and thus codegen) is not exactly equivalent [1][2], since
`div_ceil()` returns the right value for the values that currently
would overflow.
Link: https://github.com/rust-lang/rust-clippy/issues/14333 [1]
Link: https://godbolt.org/z/dPq6nGnv3 [2]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Fixes: cb5164ac43d0 ("drm/panic: Add a QR code panic screen")
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250301231602.917580-1-ojeda@kernel.org
|
|
A subsequent patch will use CPY* instructions to copy between user and
kernel memory. Add a new exception fixup type to avoid fixing up faults
on kernel memory accesses, in order to make it easier to debug kernel
bugs and to keep the same behavior as with regular loads/stores.
Signed-off-by: Kristina Martšenko <kristina.martsenko@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250228170006.390100-2-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
review-ilpo-next
|
|
This version has fix for:
- Display of die ID and optimize array size for multi package
systems.
- Fix build warning with cross compiler
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
This helps when using a cross-compiler for building intel-speed-select,
currently, its hardcoded to pick libnl3 headers from build host which may
not be same as build target when cross compiling.
cc -print-sysroot will print nothing if compiler is configured without
a sysroot and result in same string as it is now.
Fixes errors with gcc configured with host include poisoning e.g.
cc1: error: include location "/usr/include/libnl3" is unsafe for
cross-compilation [-Werror=poison-system-directories]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
[ srinivas: Changelog edits for checkpatch warning ]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Instead of displaying "-1" for IO dies, display "IO".
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Even when there is no die exported by CPUID leaf 0x1F, the kernel version
after 6.9 will show non zero die_id in the sysfs. In that case maximum
die_id can still match maximum power domain ID. So the condition to check
if the power domain ID is same a die_id to prevent duplicate display
doesn't hold true.
The better condition is to check if the maximum die_id is more than the
maximum package_id. If the die_id is exposed by CPUID leaf 0x1F, the
maximum die_id will be more than maximum package_id.
With this change tracking of max_punit_id is not used, so remove storing
max_punit_id.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
In the function for_each_online_power_domain_in_set() to pick one CPU
from each power domain a three-dimensional array is used, which assumes
that a package contains multiple dies, that means the die_id from
/sys/devices/system/cpu/cpu0/topology/die_id is only local to package.
If it is not unique, still there will be no functional issues in the
current generation of products, but the MAX_DIE_PER_PACKAGE will need to
be increased for future products with many packages.
After kernel version 6.9 die ID is unique system wide not per package.
Even if the CPU topology has no dies, the ID will still increment across
package. In this case the die_id in package 0 will be 0 and die_id in
package 1 will be 1 in a 2-package system.
Since the die count must be same for packages, just count the number of
dies in package 0 and calculate die index from
/sys/devices/system/cpu/cpu0/topology/die_id which is only unique within
a package.
In this way the array size
"int cpus[MAX_PACKAGE_COUNT][MAX_DIE_PER_PACKAGE][MAX_PUNIT_PER_DIE]"
doesn't have to increase with increasing package count.
No functional change is expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
When the ntc is reading Out Of Bounds instead of clipping to the nearest
limit (min/max) return -ENODATA. This prevents malfunctioning sensors
from sending a device into a shutdown loop due to a critical trip.
This implementation will only work for ntc type thermistors if a ptc
type is to be implemented the min/max ohm calculation must be adjusted
to take that into account.
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://lore.kernel.org/r/20250307-ntc_oob-v2-1-bba2d32b1a8e@gocontroll.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Now not only CPUs can use energy efficiency models, but GPUs
can also use. On the other hand, even with only one CPU, we can also
use energy_model to align control in thermal.
So remove the dependence of SMP, and add the DEVFREQ.
Signed-off-by: Jeson Gao <jeson.gao@unisoc.com>
[Added missing SMP config option in DTPM_CPU dependency]
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20250307132649.4056210-1-lukasz.luba@arm.com
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The usage of __rcu in the Energy Model code is quite inconsistent
which causes the following sparse warnings to trigger:
kernel/power/energy_model.c:169:15: warning: incorrect type in assignment (different address spaces)
kernel/power/energy_model.c:169:15: expected struct em_perf_table [noderef] __rcu *table
kernel/power/energy_model.c:169:15: got struct em_perf_table *
kernel/power/energy_model.c:171:9: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:171:9: expected struct callback_head *head
kernel/power/energy_model.c:171:9: got struct callback_head [noderef] __rcu *
kernel/power/energy_model.c:171:9: warning: cast removes address space '__rcu' of expression
kernel/power/energy_model.c:182:19: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:182:19: expected struct kref *kref
kernel/power/energy_model.c:182:19: got struct kref [noderef] __rcu *
kernel/power/energy_model.c:200:15: warning: incorrect type in assignment (different address spaces)
kernel/power/energy_model.c:200:15: expected struct em_perf_table [noderef] __rcu *table
kernel/power/energy_model.c:200:15: got void *[assigned] _res
kernel/power/energy_model.c:204:20: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:204:20: expected struct kref *kref
kernel/power/energy_model.c:204:20: got struct kref [noderef] __rcu *
kernel/power/energy_model.c:320:19: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:320:19: expected struct kref *kref
kernel/power/energy_model.c:320:19: got struct kref [noderef] __rcu *
kernel/power/energy_model.c:325:45: warning: incorrect type in argument 2 (different address spaces)
kernel/power/energy_model.c:325:45: expected struct em_perf_state *table
kernel/power/energy_model.c:325:45: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:425:45: warning: incorrect type in argument 3 (different address spaces)
kernel/power/energy_model.c:425:45: expected struct em_perf_state *table
kernel/power/energy_model.c:425:45: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:442:15: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:442:15: expected void const *objp
kernel/power/energy_model.c:442:15: got struct em_perf_table [noderef] __rcu *[assigned] em_table
kernel/power/energy_model.c:626:55: warning: incorrect type in argument 2 (different address spaces)
kernel/power/energy_model.c:626:55: expected struct em_perf_state *table
kernel/power/energy_model.c:626:55: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:681:16: warning: incorrect type in assignment (different address spaces)
kernel/power/energy_model.c:681:16: expected struct em_perf_state *new_ps
kernel/power/energy_model.c:681:16: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:699:37: warning: incorrect type in argument 2 (different address spaces)
kernel/power/energy_model.c:699:37: expected struct em_perf_state *table
kernel/power/energy_model.c:699:37: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:733:38: warning: incorrect type in argument 3 (different address spaces)
kernel/power/energy_model.c:733:38: expected struct em_perf_state *table
kernel/power/energy_model.c:733:38: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:855:53: warning: dereference of noderef expression
kernel/power/energy_model.c:864:32: warning: dereference of noderef expression
This is because the __rcu annotation for sparse is only applicable to
pointers that need rcu_dereference() or equivalent for protection, which
basically means pointers assigned with rcu_assign_pointer().
Make all of the above sparse warnings go away by cleaning up the usage
of __rcu and using rcu_dereference_protected() where applicable.
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/5885405.DvuYhMxLoT@rjwysocki.net
|
|
Compared to the SNP Guest Request, the "Extended" version adds data pages for
receiving certificates. If not enough pages provided, the HV can report to the
VM how much is needed so the VM can reallocate and repeat.
Commit
ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
moved handling of the allocated/desired pages number out of scope of said
mutex and create a possibility for a race (multiple instances trying to
trigger Extended request in a VM) as there is just one instance of
snp_msg_desc per /dev/sev-guest and no locking other than snp_cmd_mutex.
Fix the issue by moving the data blob/size and the GHCB input struct
(snp_req_data) into snp_guest_req which is allocated on stack now and accessed
by the GHCB caller under that mutex.
Stop allocating SEV_FW_BLOB_MAX_SIZE in snp_msg_alloc() as only one of four
callers needs it. Free the received blob in get_ext_report() right after it is
copied to the userspace. Possible future users of snp_send_guest_request() are
likely to have different ideas about the buffer size anyways.
Fixes: ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250307013700.437505-3-aik@amd.com
|
|
Commit
ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
narrowed the command mutex scope to snp_send_guest_request(). However,
GET_REPORT, GET_DERIVED_KEY, and GET_EXT_REPORT share the req structure in
snp_guest_dev. Without the mutex protection, concurrent requests can overwrite
each other's data. Fix it by dynamically allocating the request structure.
Fixes: ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
Closes: https://github.com/AMDESE/AMDSEV/issues/265
Reported-by: andreas.stuehrk@yaxi.tech
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250307013700.437505-2-aik@amd.com
|
|
Xen doesn't offer MSR_FAM10H_MMIO_CONF_BASE to all guests. This results
in the following warning:
unchecked MSR access error: RDMSR from 0xc0010058 at rIP: 0xffffffff8101d19f (xen_do_read_msr+0x7f/0xa0)
Call Trace:
xen_read_msr+0x1e/0x30
amd_get_mmconfig_range+0x2b/0x80
quirk_amd_mmconfig_area+0x28/0x100
pnp_fixup_device+0x39/0x50
__pnp_add_device+0xf/0x150
pnp_add_device+0x3d/0x100
pnpacpi_add_device_handler+0x1f9/0x280
acpi_ns_get_device_callback+0x104/0x1c0
acpi_ns_walk_namespace+0x1d0/0x260
acpi_get_devices+0x8a/0xb0
pnpacpi_init+0x50/0x80
do_one_initcall+0x46/0x2e0
kernel_init_freeable+0x1da/0x2f0
kernel_init+0x16/0x1b0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
based on quirks for a "PNP0c01" device. Treating MMCFG as disabled is the
right course of action, so no change is needed there.
This was most likely exposed by fixing the Xen MSR accessors to not be
silently-safe.
Fixes: 3fac3734c43a ("xen/pv: support selecting safe/unsafe msr accesses")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250307002846.3026685-1-andrew.cooper3@citrix.com
|
|
If the warning mode with disabled mitigation mode is used, then on each
CPU where the split lock occurred detection will be disabled in order to
make progress and delayed work will be scheduled, which then will enable
detection back.
Now it turns out that all CPUs use one global delayed work structure.
This leads to the fact that if a split lock occurs on several CPUs
at the same time (within 2 jiffies), only one CPU will schedule delayed
work, but the rest will not.
The return value of schedule_delayed_work_on() would have shown this,
but it is not checked in the code.
A diagram that can help to understand the bug reproduction:
- sld_update_msr() enables/disables SLD on both CPUs on the same core
- schedule_delayed_work_on() internally checks WORK_STRUCT_PENDING_BIT.
If a work has the 'pending' status, then schedule_delayed_work_on()
will return an error code and, most importantly, the work will not
be placed in the workqueue.
Let's say we have a multicore system on which split_lock_mitigate=0 and
a multithreaded application is running that calls splitlock in multiple
threads. Due to the fact that sld_update_msr() affects the entire core
(both CPUs), we will consider 2 CPUs from different cores. Let the 2
threads of this application schedule to CPU0 (core 0) and to CPU 2
(core 1), then:
| || |
| CPU 0 (core 0) || CPU 2 (core 1) |
|_________________________________||___________________________________|
| || |
| 1) SPLIT LOCK occured || |
| || |
| 2) split_lock_warn() || |
| || |
| 3) sysctl_sld_mitigate == 0 || |
| (work = &sl_reenable) || |
| || |
| 4) schedule_delayed_work_on() || |
| (reenable will be called || |
| after 2 jiffies on CPU 0) || |
| || |
| 5) disable SLD for core 0 || |
| || |
| ------------------------- || |
| || |
| || 6) SPLIT LOCK occured |
| || |
| || 7) split_lock_warn() |
| || |
| || 8) sysctl_sld_mitigate == 0 |
| || (work = &sl_reenable, |
| || the same address as in 3) ) |
| || |
| 2 jiffies || 9) schedule_delayed_work_on() |
| || fials because the work is in |
| || the pending state since 4). |
| || The work wasn't placed to the |
| || workqueue. reenable won't be |
| || called on CPU 2 |
| || |
| || 10) disable SLD for core 0 |
| || |
| || From now on SLD will |
| || never be reenabled on core 1 |
| || |
| ------------------------- || |
| || |
| 11) enable SLD for core 0 by || |
| __split_lock_reenable || |
| || |
If the application threads can be scheduled to all processor cores,
then over time there will be only one core left, on which SLD will be
enabled and split lock will be able to be detected; and on all other
cores SLD will be disabled all the time.
Most likely, this bug has not been noticed for so long because
sysctl_sld_mitigate default value is 1, and in this case a semaphore
is used that does not allow 2 different cores to have SLD disabled at
the same time, that is, strictly only one work is placed in the
workqueue.
In order to fix the warning mode with disabled mitigation mode,
delayed work has to be per-CPU. Implement it.
Fixes: 727209376f49 ("x86/split_lock: Add sysctl to control the misery mode")
Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250115131704.132609-1-davydov-max@yandex-team.ru
|
|
Kenneth noticed that his laptop crashes randomly when resuming from
hibernate if there is device connected and display tunneled. I was able
to reproduce this as well with the following steps:
1. Boot the system up, nothing connected.
2. Connect Thunderbolt 4 dock to the host.
3. Connect monitor to the Thunderbolt 4 dock.
4. Verify that there is picture on the screen.
5. Enter hibernate.
6. Exit hibernate.
7. Wait for the system to resume.
Expectation: System resumes just fine, the connected monitor still
shows screen.
Actual result: There is crash during resume, screen is blank.
What happens is that during resume from hibernate we tear down any
existing tunnels created by the boot kernel and this ends up calling
tb_dp_dprx_stop() which calls tb_tunnel_put() dropping the reference
count to zero even though we never called tb_dp_dprx_start() for it (we
never do that for discovery). This makes the discovered DP tunnel memory
to be released and any access after that causes use-after-free and
possible crash.
Fix this so that we only stop DPRX flow if it has been started in the
first place.
Reported-by: Kenneth Crudup <kenny@panix.com>
Closes: https://lore.kernel.org/linux-usb/8e175721-806f-45d6-892a-bd3356af80c9@panix.com/
Cc: stable@vger.kernel.org
Fixes: d6d458d42e1e ("thunderbolt: Handle DisplayPort tunnel activation asynchronously")
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The commit titled "block/bdev: lift block size restrictions to 64k"
lifted the block layer's max supported block size to 64k inside the
helper blk_validate_block_size() now that we support large folios.
However in lifting the block size we also removed the silly use
cases many filesystems have to use sb_set_blocksize() to *verify*
that the block size <= PAGE_SIZE. The call to sb_set_blocksize() was
used to check the block size <= PAGE_SIZE since historically we've
always supported userspace to create for example 64k block size
filesystems even on 4k page size systems, but what we didn't allow
was mounting them. Older filesystems have been using the check with
sb_set_blocksize() for years.
While, we could argue that such checks should be filesystem specific,
there are much more users of sb_set_blocksize() than LBS enabled
filesystem on upstream, so just do the easier thing and bring back
the PAGE_SIZE check for sb_set_blocksize() users and only skip it
for LBS enabled filesystems.
This will ensure that tests such as generic/466 when run in a loop
against say, ext4, won't try to try to actually mount a filesystem with
a block size larger than your filesystem supports given your PAGE_SIZE
and in the worst case crash.
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20250307020403.3068567-1-mcgrof@kernel.org
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The errno.h header is not always included indirectly, leading
to rare randconfig build warnings.
drivers/media/pci/mgb4/mgb4_regs.c:20:11: error: use of undeclared identifier 'EINVAL'
20 | return -EINVAL;
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Adopt managed devm_* APIs for handling mutex creation and deletion,
facilitating automatic resource cleanup.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305142615.410178-4-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Enhance code readability by fixing line break and blank line
inconsistencies.
Also make the return variable "rc" as function level local.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305142615.410178-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
To improve the code organization and readability, move the macros and
structures from the AMD PMC driver to the PMC header file.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305142615.410178-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Some of the AMD platforms do not support modern standby, so when such
CPU ID is detected, a warning message will be displayed to the user.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305142615.410178-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Use the power supply extension mechanism for registering the battery
temperature properties so that they can show up in the hwmon device
associated with the ACPI battery.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250305053009.378609-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Use devm_battery_hook_register() instead of manually calling
devm_add_action_or_reset() to simplify the code.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250305053009.378609-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
On the Dell Inspiron 3505 the battery temperature is always
0.1 degrees larger than the temperature show inside the OEM
application.
Emulate this behaviour to avoid showing strange looking values
like 29.1 degrees.
Fixes: 0331b1b0ba653 ("platform/x86: dell-ddv: Fix temperature scaling")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250305053009.378609-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The num_clks is set this way:
hdmirx_dev->num_clks = devm_clk_bulk_get_all(dev, &hdmirx_dev->clks);
if (hdmirx_dev->num_clks < 1)
return -ENODEV;
The devm_clk_bulk_get_all() function returns negative error codes so the
hdmirx_dev->num_cks variable needs to be signed for the error handling to
work.
Fixes: 7b59b132ad43 ("media: platform: synopsys: Add support for HDMI input driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
A wiphy_work can be queued from the moment the wiphy is allocated and
initialized (i.e. wiphy_new_nm). When a wiphy_work is queued, the
rdev::wiphy_work is getting queued.
If wiphy_free is called before the rdev::wiphy_work had a chance to run,
the wiphy memory will be freed, and then when it eventally gets to run
it'll use invalid memory.
Fix this by canceling the work before freeing the wiphy.
Fixes: a3ee4dc84c4e ("wifi: cfg80211: add a work abstraction with special semantics")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250306123626.efd1d19f6e07.I48229f96f4067ef73f5b87302335e2fd750136c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When MLO is used and SA Query processing isn't done by
userspace (e.g. wpa_supplicant w/o CONFIG_OCV), then
the mac80211 code kicks in but uses the wrong addresses.
Fix them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306123626.bab48bb49061.I9391b22f1360d20ac8c4e92604de23f27696ba8f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The refactoring of the assoc link handling in order to
support multi-link reconfiguration broke the setting
of the assoc link ID, and thus resulted in the wrong
BSS "use_for" value being selected. Fix that for both
association and ML reconfiguration.
Fixes: 720fa448f5a7 ("wifi: nl80211: Split the links handling of an association request")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306123626.7b233d769c32.I62fd04a8667dd55cedb9a1c0414cc92dd098da75@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The worker really shouldn't be queued for a non-running interface.
Also, if ieee80211_setup_sdata is called between queueing and executing
the wk, it will be initialized, which will corrupt wiphy_work_list.
Fixes: f8891461a277 ("mac80211: do not start any work during reconfigure flow")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250306123626.1e02caf82640.I4949e71ed56e7186ed4968fa9ddff477473fa2f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We first want to flush the station to make sure we no longer have any
frames being Tx by the station before the station is moved to
un-authorized state. Failing to do that will lead to races: a frame may
be sent after the station's state has been changed.
Since the API clearly states that the driver can't fail the sta_state()
transition down the list of state, we can easily flush the station
first, and only then call the driver's sta_state().
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306123626.450bc40e8b04.I636ba96843c77f13309c15c9fd6eb0c5a52a7976@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the restart work happens to run after the opmode left
(i.e. called iwl_trans_op_mode_leave), then the opmode memory (including
its mutex) is likely to be freed already, and trans->opmode is NULL.
Although the hw is stopped in that stage, which means that this restart
got aborted (i.e. STATUS_RESET_PENDING will be cleared),
it still can access trans->opmode (NULL pointer dereference)
or the opmodes memory (which is freed).
Fix this by canceling the restart wk in iwl_trans_op_mode_leave.
Also make sure that the restart wk is really aborted.
Fixes: 7391b2a4f7db ("wifi: iwlwifi: rework firmware error handling")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250306122425.801301ba1b8b.I6f6143f550b6335b699920c5d4b2b78449607a96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When MSI-X is not enabled, we mask all the interrupts in the interrupt
handler and re-enable them when the interrupt thread runs. If
STATUS_INT_ENABLED is not set, we won't re-enable in the thread.
In order to get the ALIVE interrupt, we allow the ALIVE interrupt
itself, and RX as well in order to receive the ALIVE notification (which
is received as an RX from the firmware.
The problem is that STATUS_INT_ENABLED is clear until the op_mode calls
trans_fw_alive which means that until trans_fw_alive is called, any
notification from the firmware will not be received.
This became a problem when we inserted the pnvm_load exactly between the
ALIVE and trans_fw_alive.
Fix that by calling trans_fw_alive before loading the PNVM. This will
allow to get the notification from the firmware about PNVM load being
complete and continue the flow normally.
This didn't happen on MSI-X because we don't disable the interrupts in
the ISR when MSI-X is available.
The error in the log looks like this:
iwlwifi 0000:00:03.0: Timeout waiting for PNVM load!
iwlwifi 0000:00:03.0: Failed to start RT ucode: -110
iwlwifi 0000:00:03.0: WRT: Collecting data: ini trigger 13 fired (delay=0ms).
Fixes: 70d3ca86b025 ("iwlwifi: mvm: ring the doorbell and wait for PNVM load completion")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306122425.0f2cf207aae1.I025d8f724b44f52eadf6c19069352eb9275613a8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The allocation of the scatter gather data structure should be done
based on the number of memory chunks that need to be mapped, and it
is not dependent on the overall payload length. Fix it.
In addition, as the skb_to_sgvec() function returns an 'int' do not
assign it to an 'unsigned int' as otherwise the error check would be
useless.
Fixes: 7f5e3038f029 ("wifi: iwlwifi: map entire SKB when sending AMSDUs")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306122425.8c0e23a3d583.I3cb4d6768c9d28ce3da6cd0a6c65466176cfc1ee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since I really don't want to be CC'ed on every patch
add X: entries for all the drivers that are otherwise
covered. In some cases, add a bit more to drivers that
have other entries, mostly for the vendor directories,
but for libertas also add libertas_tf.
While at it, also add all nl80211-related (vendor)
UAPI header files to the nl80211 entry.
Link: https://patch.msgid.link/20250306092831.f7fdfe7df7b2.I7c86da443038af32e9bcbaa5f53b1e4128a0d1f9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The proc read of each client should protect against the concurrent
data changes to keep the data consistent; although they are supposed
to be safe and won't crash things, it doesn't guarantee the
consistency between the read values. Take client->ioctl_mutex for
protecting against the concurrent changes.
Link: https://patch.msgid.link/20250307084246.29271-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_seq_poll() calls snd_seq_write_pool_allocated() that reads out a
field in client->pool object, while it can be updated concurrently via
ioctls, as reported by syzbot. The data race itself is harmless, as
it's merely a poll() call, and the state is volatile. OTOH, the read
out of poll object info from the caller side is fragile, and we can
leave it better in snd_seq_pool_poll_wait() alone.
A similar pattern is seen in snd_seq_kernel_client_write_poll(), too,
which is called from the OSS sequencer.
This patch drops the pool checks from the caller side and add the
pool->lock in snd_seq_pool_poll_wait() for better data consistency.
Reported-by: syzbot+2d373c9936c00d7e120c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/67c88903.050a0220.15b4b9.0028.GAE@google.com
Link: https://patch.msgid.link/20250307084246.29271-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The irqsteer IP routes groups of input interrupts to a dedicated system
interrupt per group. Each group handles 64 input interrupts.
The current driver is limited to 8 groups, i.e. 512 input interrupts, which
is sufficient for the existing i.MX SoCs. The upcoming i.MX94 family
extends the irqsteer IP to 15 groups, i.e. 960 interrupts.
Extending the group limit to 15 enables this, but the new SoCs are not
guaranteed to utilize all 15 groups. Unused groups have no mapping for the
underlying output interrupt, which makes the probe function fail as it
expects a valid mapping for each group output.
Remove this limitation and stop the mapping loop, when no valid mapping is
detected.
[ tglx: Massage change log ]
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/all/20250305095522.2177843-1-ping.bai@nxp.com
|
|
It is possible to use nl80211 to request to the driver to do allow the
required bus configuration to wake-up the host.
This patch implements the required API for nl80211.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://patch.msgid.link/20250304153224.39083-6-jerome.pouiller@silabs.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the device is connected with SDIO bus, it can wake up the host using
either the SDIO controller (that requires MMC_PM_WAKE_SDIO_IRQ
capability) or the out-of-bound IRQ. This patch allows both.
Obviously, the SDIO controller must be able to keep the SDIO device
powered on.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://patch.msgid.link/20250304153224.39083-5-jerome.pouiller@silabs.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the host is asleep, the device has wake up the host using the
usual SPI IRQ.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://patch.msgid.link/20250304153224.39083-4-jerome.pouiller@silabs.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
WF200 is able to keep the connection with the AP alive while the host is
asleep. So, let's expose this capability to the user.
For now, we don't provide any way to control the device filtering
features. The user has to allow wake-up on any received packets and on
disconnections.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://patch.msgid.link/20250304153224.39083-3-jerome.pouiller@silabs.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Just declare fields in the same order in bus_spi.c and bus_sdio.c
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://patch.msgid.link/20250304153224.39083-2-jerome.pouiller@silabs.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
