summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-02-08Merge ath-current from ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git ath.git fixes for 4.16. Major changes: ath10k * correct firmware RAM dump length for QCA6174/QCA9377 * add new QCA988X device id * fix a kernel panic during pci probe * revert a recent commit which broke ath10k firmware metadata parsing ath9k * fix a noise floor regression introduced during the merge window * add new device id
2018-02-08Revert "ath10k: add sanity check to ie_len before parsing fw/board ie"Ryan Hsu
This reverts commit 9ed4f91628737c820af6a1815b65bc06bd31518f. The commit introduced a regression that over read the ie with the padding. - the expected IE information ath10k_pci 0000:03:00.0: found firmware features ie (1 B) ath10k_pci 0000:03:00.0: Enabling feature bit: 6 ath10k_pci 0000:03:00.0: Enabling feature bit: 7 ath10k_pci 0000:03:00.0: features ath10k_pci 0000:03:00.0: 00000000: c0 00 00 00 00 00 00 00 - the wrong IE with padding is read (0x77) ath10k_pci 0000:03:00.0: found firmware features ie (4 B) ath10k_pci 0000:03:00.0: Enabling feature bit: 6 ath10k_pci 0000:03:00.0: Enabling feature bit: 7 ath10k_pci 0000:03:00.0: Enabling feature bit: 8 ath10k_pci 0000:03:00.0: Enabling feature bit: 9 ath10k_pci 0000:03:00.0: Enabling feature bit: 10 ath10k_pci 0000:03:00.0: Enabling feature bit: 12 ath10k_pci 0000:03:00.0: Enabling feature bit: 13 ath10k_pci 0000:03:00.0: Enabling feature bit: 14 ath10k_pci 0000:03:00.0: Enabling feature bit: 16 ath10k_pci 0000:03:00.0: Enabling feature bit: 17 ath10k_pci 0000:03:00.0: Enabling feature bit: 18 ath10k_pci 0000:03:00.0: features ath10k_pci 0000:03:00.0: 00000000: c0 77 07 00 00 00 00 00 Tested-by: Mike Lothian <mike@fireburn.co.uk> Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-07ath9k_htc: add Altai WA1011N-GUOleksij Rempel
as reported in: https://github.com/qca/open-ath9k-htc-firmware/pull/71#issuecomment-361100070 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-07ath10k: fix kernel panic issue during pci probeYu Wang
If device gone during chip reset, ar->normal_mode_fw.board is not initialized, but ath10k_debug_print_hwfw_info() will try to access its member, which will cause 'kernel NULL pointer' issue. This was found using a faulty device (pci link went down sometimes) in a random insmod/rmmod/other-op test. To fix it, check ar->normal_mode_fw.board before accessing the member. pci 0000:02:00.0: BAR 0: assigned [mem 0xf7400000-0xf75fffff 64bit] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002) ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 ath10k_pci 0000:02:00.0: failed to read device register, device is gone ath10k_pci 0000:02:00.0: failed to wait for target init: -5 ath10k_pci 0000:02:00.0: failed to warm reset: -5 ath10k_pci 0000:02:00.0: firmware crashed during chip reset ath10k_pci 0000:02:00.0: firmware crashed! (uuid 5d018951-b8e1-404a-8fde-923078b4423a) ath10k_pci 0000:02:00.0: (null) target 0x00000000 chip_id 0x00340aff sub 0000:0000 ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1 ath10k_pci 0000:02:00.0: firmware ver api 0 features crc32 00000000 ... BUG: unable to handle kernel NULL pointer dereference at 00000004 ... Call Trace: [<fb4e7882>] ath10k_print_driver_info+0x12/0x20 [ath10k_core] [<fb62b7dd>] ath10k_pci_fw_crashed_dump+0x6d/0x4d0 [ath10k_pci] [<fb629f07>] ? ath10k_pci_sleep.part.19+0x57/0xc0 [ath10k_pci] [<fb62c8ee>] ath10k_pci_hif_power_up+0x14e/0x1b0 [ath10k_pci] [<c10477fb>] ? do_page_fault+0xb/0x10 [<fb4eb934>] ath10k_core_register_work+0x24/0x840 [ath10k_core] [<c18a00d8>] ? netlbl_unlhsh_remove+0x178/0x410 [<c10477f0>] ? __do_page_fault+0x480/0x480 [<c1068e44>] process_one_work+0x114/0x3e0 [<c1069d07>] worker_thread+0x37/0x4a0 [<c106e294>] kthread+0xa4/0xc0 [<c1069cd0>] ? create_worker+0x180/0x180 [<c106e1f0>] ? kthread_park+0x50/0x50 [<c18ab4f7>] ret_from_fork+0x1b/0x28 Code: 78 80 b8 50 09 00 00 00 75 5d 8d 75 94 c7 44 24 08 aa d7 52 fb c7 44 24 04 64 00 00 00 89 34 24 e8 82 52 e2 c5 8b 83 dc 08 00 00 <8b> 50 04 8b 08 31 c0 e8 20 57 e3 c5 89 44 24 10 8b 83 58 09 00 EIP: [<fb4e7754>]- ath10k_debug_print_board_info+0x34/0xb0 [ath10k_core] SS:ESP 0068:f4921d90 CR2: 0000000000000004 Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-07ath9k: Fix get channel default noise floorWojciech Dubowik
Commit 8da58553cc63 ("ath9k: Use calibrated noise floor value when available") introduced regression in ath9k_hw_getchan_noise where per chain nominal noise floor has been taken instead default for channel. Revert to original default channel noise floor. Fixes: 8da58553cc63 ("ath9k: Use calibrated noise floor value when available") Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-07ath10k: add support for Ubiquiti rebranded QCA988X v2Tobias Schramm
Some modern Ubiquiti devices contain a rebranded QCA988X rev2 with a custom Ubiquiti vendor and device id. This patch adds support for those devices, treating them as a QCA988X v2. Signed-off-by: Tobias Schramm <tobleminer@gmail.com> [kvalo@codeaurora.org: rebase, add missing fields in hw_params, fix a long line in pci.c:61] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-07PCI: Add Ubiquiti Networks vendor IDTobias Schramm
Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Tobias Schramm <tobleminer@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-07ath10k: correct the length of DRAM dump for QCA6174 hw3.x/QCA9377 hw1.1Yu Wang
The length of DRAM dump for QCA6174 hw3.0/hw3.2 and QCA9377 hw1.1 are less than the actual value, some coredump contents are missed. To fix it, change the length from 0x90000 to 0xa8000. Fixes: 703f261dd77f ("ath10k: add memory dump support for QCA6174/QCA9377") Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-07rtlwifi: rtl8821ae: Fix connection lost problem correctlyLarry Finger
There has been a coding error in rtl8821ae since it was first introduced, namely that an 8-bit register was read using a 16-bit read in _rtl8821ae_dbi_read(). This error was fixed with commit 40b368af4b75 ("rtlwifi: Fix alignment issues"); however, this change led to instability in the connection. To restore stability, this change was reverted in commit b8b8b16352cd ("rtlwifi: rtl8821ae: Fix connection lost problem"). Unfortunately, the unaligned access causes machine checks in ARM architecture, and we were finally forced to find the actual cause of the problem on x86 platforms. Following a suggestion from Pkshih <pkshih@realtek.com>, it was found that increasing the ASPM L1 latency from 0 to 7 fixed the instability. This parameter was varied to see if a smaller value would work; however, it appears that 7 is the safest value. A new symbol is defined for this quantity, thus it can be easily changed if necessary. Fixes: b8b8b16352cd ("rtlwifi: rtl8821ae: Fix connection lost problem") Cc: Stable <stable@vger.kernel.org> # 4.14+ Fix-suggested-by: Pkshih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: James Cameron <quozl@laptop.org> # x86_64 OLPC NL3 Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-01mt76: do not set status->aggr for NULL data framesFelix Fietkau
Avoids data connection stalls when the client toggles powersave mode Fixes: aee5b8cf2477 ("mt76: implement A-MPDU rx reordering in the driver code") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-01mt76: avoid re-queueing A-MPDU rx reorder work if no frames are pendingFelix Fietkau
Fixes: aee5b8cf2477 ("mt76: implement A-MPDU rx reordering in the driver code") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-01mt76: implement processing of BlockAckReq framesFelix Fietkau
Avoids timeouts on reordered A-MPDU rx frames Fixes: aee5b8cf2477 ("mt76: implement A-MPDU rx reordering in the driver code") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-01mt76: implement AP_LINK_PSFelix Fietkau
With software A-MPDU reordering in place, frames that notify mac80211 of powersave changes are reordered as well, which can cause connection stalls. Fix this by implementing powersave state processing in the driver. Fixes: aee5b8cf2477 ("mt76: implement A-MPDU rx reordering in the driver code") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo
The last pull request didn't make it to v4.15 (I was too late) so pull it to wireless-drivers-next.git instead so that it can go to v4.16.
2018-01-29ibmvnic: Wait for device response when changing MACThomas Falcon
Wait for a response from the VNIC server before exiting after setting the MAC address. The resolves an issue with bonding a VNIC client in ALB or TLB modes. The bonding driver was changing the MAC address more rapidly than the device could respond, causing the following errors. "bond0: the hw address of slave eth2 is in use by the bond; couldn't find a slave with a free hw address to give it (this should not have happened)" If the function waits until the change is finalized, these errors are avoided. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29qlcnic: fix deadlock bugJunxiao Bi
The following soft lockup was caught. This is a deadlock caused by recusive locking. Process kworker/u40:1:28016 was holding spin lock "mbx->queue_lock" in qlcnic_83xx_mailbox_worker(), while a softirq came in and ask the same spin lock in qlcnic_83xx_enqueue_mbx_cmd(). This lock should be hold by disable bh.. [161846.962125] NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [kworker/u40:1:28016] [161846.962367] Modules linked in: tun ocfs2 xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn xenfs xen_privcmd autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bnx2fc fcoe libfcoe libfc sunrpc 8021q mrp garp bridge stp llc bonding dm_round_robin dm_multipath iTCO_wdt iTCO_vendor_support pcspkr sb_edac edac_core i2c_i801 shpchp lpc_ich mfd_core ioatdma ipmi_devintf ipmi_si ipmi_msghandler sg ext4 jbd2 mbcache2 sr_mod cdrom sd_mod igb i2c_algo_bit i2c_core ahci libahci megaraid_sas ixgbe dca ptp pps_core vxlan udp_tunnel ip6_udp_tunnel qla2xxx scsi_transport_fc qlcnic crc32c_intel be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi ipv6 cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi dm_mirror dm_region_hash dm_log dm_mod [161846.962454] [161846.962460] CPU: 1 PID: 28016 Comm: kworker/u40:1 Not tainted 4.1.12-94.5.9.el6uek.x86_64 #2 [161846.962463] Hardware name: Oracle Corporation SUN SERVER X4-2L /ASSY,MB,X4-2L , BIOS 26050100 09/19/2017 [161846.962489] Workqueue: qlcnic_mailbox qlcnic_83xx_mailbox_worker [qlcnic] [161846.962493] task: ffff8801f2e34600 ti: ffff88004ca5c000 task.ti: ffff88004ca5c000 [161846.962496] RIP: e030:[<ffffffff810013aa>] [<ffffffff810013aa>] xen_hypercall_sched_op+0xa/0x20 [161846.962506] RSP: e02b:ffff880202e43388 EFLAGS: 00000206 [161846.962509] RAX: 0000000000000000 RBX: ffff8801f6996b70 RCX: ffffffff810013aa [161846.962511] RDX: ffff880202e433cc RSI: ffff880202e433b0 RDI: 0000000000000003 [161846.962513] RBP: ffff880202e433d0 R08: 0000000000000000 R09: ffff8801fe893200 [161846.962516] R10: ffff8801fe400538 R11: 0000000000000206 R12: ffff880202e4b000 [161846.962518] R13: 0000000000000050 R14: 0000000000000001 R15: 000000000000020d [161846.962528] FS: 0000000000000000(0000) GS:ffff880202e40000(0000) knlGS:ffff880202e40000 [161846.962531] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [161846.962533] CR2: 0000000002612640 CR3: 00000001bb796000 CR4: 0000000000042660 [161846.962536] Stack: [161846.962538] ffff880202e43608 0000000000000000 ffffffff813f0442 ffff880202e433b0 [161846.962543] 0000000000000000 ffff880202e433cc ffffffff00000001 0000000000000000 [161846.962547] 00000009813f03d6 ffff880202e433e0 ffffffff813f0460 ffff880202e43440 [161846.962552] Call Trace: [161846.962555] <IRQ> [161846.962565] [<ffffffff813f0442>] ? xen_poll_irq_timeout+0x42/0x50 [161846.962570] [<ffffffff813f0460>] xen_poll_irq+0x10/0x20 [161846.962578] [<ffffffff81014222>] xen_lock_spinning+0xe2/0x110 [161846.962583] [<ffffffff81013f01>] __raw_callee_save_xen_lock_spinning+0x11/0x20 [161846.962592] [<ffffffff816e5c57>] ? _raw_spin_lock+0x57/0x80 [161846.962609] [<ffffffffa028acfc>] qlcnic_83xx_enqueue_mbx_cmd+0x7c/0xe0 [qlcnic] [161846.962623] [<ffffffffa028e008>] qlcnic_83xx_issue_cmd+0x58/0x210 [qlcnic] [161846.962636] [<ffffffffa028caf2>] qlcnic_83xx_sre_macaddr_change+0x162/0x1d0 [qlcnic] [161846.962649] [<ffffffffa028cb8b>] qlcnic_83xx_change_l2_filter+0x2b/0x30 [qlcnic] [161846.962657] [<ffffffff8160248b>] ? __skb_flow_dissect+0x18b/0x650 [161846.962670] [<ffffffffa02856e5>] qlcnic_send_filter+0x205/0x250 [qlcnic] [161846.962682] [<ffffffffa0285c77>] qlcnic_xmit_frame+0x547/0x7b0 [qlcnic] [161846.962691] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962696] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962701] [<ffffffff81630112>] sch_direct_xmit+0x112/0x220 [161846.962706] [<ffffffff8160b80f>] __dev_queue_xmit+0x1df/0x5e0 [161846.962710] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962721] [<ffffffffa0575bd5>] bond_dev_queue_xmit+0x35/0x80 [bonding] [161846.962729] [<ffffffffa05769fb>] __bond_start_xmit+0x1cb/0x210 [bonding] [161846.962736] [<ffffffffa0576a71>] bond_start_xmit+0x31/0x60 [bonding] [161846.962740] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962745] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962749] [<ffffffff8160bb1e>] __dev_queue_xmit+0x4ee/0x5e0 [161846.962754] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962760] [<ffffffffa05cfa72>] vlan_dev_hard_start_xmit+0xb2/0x150 [8021q] [161846.962764] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962769] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962773] [<ffffffff8160bb1e>] __dev_queue_xmit+0x4ee/0x5e0 [161846.962777] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962789] [<ffffffffa05adf74>] br_dev_queue_push_xmit+0x54/0xa0 [bridge] [161846.962797] [<ffffffffa05ae4ff>] br_forward_finish+0x2f/0x90 [bridge] [161846.962807] [<ffffffff810b0dad>] ? ttwu_do_wakeup+0x1d/0x100 [161846.962811] [<ffffffff815f929b>] ? __alloc_skb+0x8b/0x1f0 [161846.962818] [<ffffffffa05ae04d>] __br_forward+0x8d/0x120 [bridge] [161846.962822] [<ffffffff815f613b>] ? __kmalloc_reserve+0x3b/0xa0 [161846.962829] [<ffffffff810be55e>] ? update_rq_runnable_avg+0xee/0x230 [161846.962836] [<ffffffffa05ae176>] br_forward+0x96/0xb0 [bridge] [161846.962845] [<ffffffffa05af85e>] br_handle_frame_finish+0x1ae/0x420 [bridge] [161846.962853] [<ffffffffa05afc4f>] br_handle_frame+0x17f/0x260 [bridge] [161846.962862] [<ffffffffa05afad0>] ? br_handle_frame_finish+0x420/0x420 [bridge] [161846.962867] [<ffffffff8160d057>] __netif_receive_skb_core+0x1f7/0x870 [161846.962872] [<ffffffff8160d6f2>] __netif_receive_skb+0x22/0x70 [161846.962877] [<ffffffff8160d913>] netif_receive_skb_internal+0x23/0x90 [161846.962884] [<ffffffffa07512ea>] ? xenvif_idx_release+0xea/0x100 [xen_netback] [161846.962889] [<ffffffff816e5a10>] ? _raw_spin_unlock_irqrestore+0x20/0x50 [161846.962893] [<ffffffff8160e624>] netif_receive_skb_sk+0x24/0x90 [161846.962899] [<ffffffffa075269a>] xenvif_tx_submit+0x2ca/0x3f0 [xen_netback] [161846.962906] [<ffffffffa0753f0c>] xenvif_tx_action+0x9c/0xd0 [xen_netback] [161846.962915] [<ffffffffa07567f5>] xenvif_poll+0x35/0x70 [xen_netback] [161846.962920] [<ffffffff8160e01b>] napi_poll+0xcb/0x1e0 [161846.962925] [<ffffffff8160e1c0>] net_rx_action+0x90/0x1c0 [161846.962931] [<ffffffff8108aaba>] __do_softirq+0x10a/0x350 [161846.962938] [<ffffffff8108ae75>] irq_exit+0x125/0x130 [161846.962943] [<ffffffff813f03a9>] xen_evtchn_do_upcall+0x39/0x50 [161846.962950] [<ffffffff816e7ffe>] xen_do_hypervisor_callback+0x1e/0x40 [161846.962952] <EOI> [161846.962959] [<ffffffff816e5c4a>] ? _raw_spin_lock+0x4a/0x80 [161846.962964] [<ffffffff816e5b1e>] ? _raw_spin_lock_irqsave+0x1e/0xa0 [161846.962978] [<ffffffffa028e279>] ? qlcnic_83xx_mailbox_worker+0xb9/0x2a0 [qlcnic] [161846.962991] [<ffffffff810a14e1>] ? process_one_work+0x151/0x4b0 [161846.962995] [<ffffffff8100c3f2>] ? check_events+0x12/0x20 [161846.963001] [<ffffffff810a1960>] ? worker_thread+0x120/0x480 [161846.963005] [<ffffffff816e187b>] ? __schedule+0x30b/0x890 [161846.963010] [<ffffffff810a1840>] ? process_one_work+0x4b0/0x4b0 [161846.963015] [<ffffffff810a1840>] ? process_one_work+0x4b0/0x4b0 [161846.963021] [<ffffffff810a6b3e>] ? kthread+0xce/0xf0 [161846.963025] [<ffffffff810a6a70>] ? kthread_freezable_should_stop+0x70/0x70 [161846.963031] [<ffffffff816e6522>] ? ret_from_fork+0x42/0x70 [161846.963035] [<ffffffff810a6a70>] ? kthread_freezable_should_stop+0x70/0x70 [161846.963037] Code: cc 51 41 53 b8 1c 00 00 00 0f 05 41 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 51 41 53 b8 1d 00 00 00 0f 05 <41> 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29tcp: release sk_frag.page in tcp_disconnectLi RongQing
socket can be disconnected and gets transformed back to a listening socket, if sk_frag.page is not released, which will be cloned into a new socket by sk_clone_lock, but the reference count of this page is increased, lead to a use after free or double free issue Signed-off-by: Li RongQing <lirongqing@baidu.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29ipv4: Get the address of interface correctly.Tonghao Zhang
When using ioctl to get address of interface, we can't get it anymore. For example, the command is show as below. # ifconfig eth0 In the patch ("03aef17bb79b3"), the devinet_ioctl does not return a suitable value, even though we can find it in the kernel. Then fix it now. Fixes: 03aef17bb79b3 ("devinet_ioctl(): take copyin/copyout to caller") Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29net_sched: gen_estimator: fix lockdep splatEric Dumazet
syzbot reported a lockdep splat in gen_new_estimator() / est_fetch_counters() when attempting to lock est->stats_lock. Since est_fetch_counters() is called from BH context from timer interrupt, we need to block BH as well when calling it from process context. Most qdiscs use per cpu counters and are immune to the problem, but net/sched/act_api.c and net/netfilter/xt_RATEEST.c are using a spinlock to protect their data. They both call gen_new_estimator() while object is created and not yet alive, so this bug could not trigger a deadlock, only a lockdep splat. Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29net: macb: Handle HRESP errorHarini Katakam
Handle HRESP error by doing a SW reset of RX and TX and re-initializing the descriptors, RX and TX queue pointers. Signed-off-by: Harini Katakam <harinik@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoringGal Pressman
On TTC table creation, the indirection TIRs should be used instead of the inner indirection TIRs. Fixes: 1ae1df3a1193 ("net/mlx5e: Refactor RSS related objects and code") Signed-off-by: Gal Pressman <galp@mellanox.com> Reviewed-by: Shalom Lagziel <shaloml@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29ipv6: addrconf: break critical section in addrconf_verify_rtnl()Eric Dumazet
Heiner reported a lockdep splat [1] This is caused by attempting GFP_KERNEL allocation while RCU lock is held and BH blocked. We believe that addrconf_verify_rtnl() could run for a long period, so instead of using GFP_ATOMIC here as Ido suggested, we should break the critical section and restart it after the allocation. [1] [86220.125562] ============================= [86220.125586] WARNING: suspicious RCU usage [86220.125612] 4.15.0-rc7-next-20180110+ #7 Not tainted [86220.125641] ----------------------------- [86220.125666] kernel/sched/core.c:6026 Illegal context switch in RCU-bh read-side critical section! [86220.125711] other info that might help us debug this: [86220.125755] rcu_scheduler_active = 2, debug_locks = 1 [86220.125792] 4 locks held by kworker/0:2/1003: [86220.125817] #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000da8e9b73>] process_one_work+0x1de/0x680 [86220.125895] #1: ((addr_chk_work).work){+.+.}, at: [<00000000da8e9b73>] process_one_work+0x1de/0x680 [86220.125959] #2: (rtnl_mutex){+.+.}, at: [<00000000b06d9510>] rtnl_lock+0x12/0x20 [86220.126017] #3: (rcu_read_lock_bh){....}, at: [<00000000aef52299>] addrconf_verify_rtnl+0x1e/0x510 [ipv6] [86220.126111] stack backtrace: [86220.126142] CPU: 0 PID: 1003 Comm: kworker/0:2 Not tainted 4.15.0-rc7-next-20180110+ #7 [86220.126185] Hardware name: ZOTAC ZBOX-CI321NANO/ZBOX-CI321NANO, BIOS B246P105 06/01/2015 [86220.126250] Workqueue: ipv6_addrconf addrconf_verify_work [ipv6] [86220.126288] Call Trace: [86220.126312] dump_stack+0x70/0x9e [86220.126337] lockdep_rcu_suspicious+0xce/0xf0 [86220.126365] ___might_sleep+0x1d3/0x240 [86220.126390] __might_sleep+0x45/0x80 [86220.126416] kmem_cache_alloc_trace+0x53/0x250 [86220.126458] ? ipv6_add_addr+0xfe/0x6e0 [ipv6] [86220.126498] ipv6_add_addr+0xfe/0x6e0 [ipv6] [86220.126538] ipv6_create_tempaddr+0x24d/0x430 [ipv6] [86220.126580] ? ipv6_create_tempaddr+0x24d/0x430 [ipv6] [86220.126623] addrconf_verify_rtnl+0x339/0x510 [ipv6] [86220.126664] ? addrconf_verify_rtnl+0x339/0x510 [ipv6] [86220.126708] addrconf_verify_work+0xe/0x20 [ipv6] [86220.126738] process_one_work+0x258/0x680 [86220.126765] worker_thread+0x35/0x3f0 [86220.126790] kthread+0x124/0x140 [86220.126813] ? process_one_work+0x680/0x680 [86220.126839] ? kthread_create_worker_on_cpu+0x40/0x40 [86220.126869] ? umh_complete+0x40/0x40 [86220.126893] ? call_usermodehelper_exec_async+0x12a/0x160 [86220.126926] ret_from_fork+0x4b/0x60 [86220.126999] BUG: sleeping function called from invalid context at mm/slab.h:420 [86220.127041] in_atomic(): 1, irqs_disabled(): 0, pid: 1003, name: kworker/0:2 [86220.127082] 4 locks held by kworker/0:2/1003: [86220.127107] #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000da8e9b73>] process_one_work+0x1de/0x680 [86220.127179] #1: ((addr_chk_work).work){+.+.}, at: [<00000000da8e9b73>] process_one_work+0x1de/0x680 [86220.127242] #2: (rtnl_mutex){+.+.}, at: [<00000000b06d9510>] rtnl_lock+0x12/0x20 [86220.127300] #3: (rcu_read_lock_bh){....}, at: [<00000000aef52299>] addrconf_verify_rtnl+0x1e/0x510 [ipv6] [86220.127414] CPU: 0 PID: 1003 Comm: kworker/0:2 Not tainted 4.15.0-rc7-next-20180110+ #7 [86220.127463] Hardware name: ZOTAC ZBOX-CI321NANO/ZBOX-CI321NANO, BIOS B246P105 06/01/2015 [86220.127528] Workqueue: ipv6_addrconf addrconf_verify_work [ipv6] [86220.127568] Call Trace: [86220.127591] dump_stack+0x70/0x9e [86220.127616] ___might_sleep+0x14d/0x240 [86220.127644] __might_sleep+0x45/0x80 [86220.127672] kmem_cache_alloc_trace+0x53/0x250 [86220.127717] ? ipv6_add_addr+0xfe/0x6e0 [ipv6] [86220.127762] ipv6_add_addr+0xfe/0x6e0 [ipv6] [86220.127807] ipv6_create_tempaddr+0x24d/0x430 [ipv6] [86220.127854] ? ipv6_create_tempaddr+0x24d/0x430 [ipv6] [86220.127903] addrconf_verify_rtnl+0x339/0x510 [ipv6] [86220.127950] ? addrconf_verify_rtnl+0x339/0x510 [ipv6] [86220.127998] addrconf_verify_work+0xe/0x20 [ipv6] [86220.128032] process_one_work+0x258/0x680 [86220.128063] worker_thread+0x35/0x3f0 [86220.128091] kthread+0x124/0x140 [86220.128117] ? process_one_work+0x680/0x680 [86220.128146] ? kthread_create_worker_on_cpu+0x40/0x40 [86220.128180] ? umh_complete+0x40/0x40 [86220.128207] ? call_usermodehelper_exec_async+0x12a/0x160 [86220.128243] ret_from_fork+0x4b/0x60 Fixes: f3d9832e56c4 ("ipv6: addrconf: cleanup locking in ipv6_add_addr") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29ipv6: change route cache aging logicWei Wang
In current route cache aging logic, if a route has both RTF_EXPIRE and RTF_GATEWAY set, the route will only be removed if the neighbor cache has no NTF_ROUTER flag. Otherwise, even if the route has expired, it won't get deleted. Fix this logic to always check if the route has expired first and then do the gateway neighbor cache check if previous check decide to not remove the exception entry. Fixes: 1859bac04fb6 ("ipv6: remove from fib tree aged out RTF_CACHE dst") Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29i40e/i40evf: Update DESC_NEEDED value to reflect larger valueAlexander Duyck
When compared to ixgbe and other previous Intel drivers the i40e and i40evf drivers actually reserve 2 additional descriptors in maybe_stop_tx for cache line alignment. We need to update DESC_NEEDED to reflect this as otherwise we are more likely to return TX_BUSY which will cause issues with things like xmit_more. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29bnxt_en: cleanup DIM work on device shutdownAndy Gospodarek
Make sure to cancel any pending work that might update driver coalesce settings when taking down an interface. Fixes: 6a8788f25625 ("bnxt_en: add support for software dynamic interrupt moderation") Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Cc: Michael Chan <michael.chan@broadcom.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29net: ipv6: send unsolicited NA after DADDavid Ahern
Unsolicited IPv6 neighbor advertisements should be sent after DAD completes. Update ndisc_send_unsol_na to skip tentative, non-optimistic addresses and have those sent by addrconf_dad_completed after DAD. Fixes: 4a6e3c5def13c ("net: ipv6: send unsolicited NA on admin up") Reported-by: Vivek Venkatraman <vivek@cumulusnetworks.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29gianfar: prevent integer wrapping in the rx handlerAndy Spencer
When the frame check sequence (FCS) is split across the last two frames of a fragmented packet, part of the FCS gets counted twice, once when subtracting the FCS, and again when subtracting the previously received data. For example, if 1602 bytes are received, and the first fragment contains the first 1600 bytes (including the first two bytes of the FCS), and the second fragment contains the last two bytes of the FCS: 'skb->len == 1600' from the first fragment size = lstatus & BD_LENGTH_MASK; # 1602 size -= ETH_FCS_LEN; # 1598 size -= skb->len; # -2 Since the size is unsigned, it wraps around and causes a BUG later in the packet handling, as shown below: kernel BUG at ./include/linux/skbuff.h:2068! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [c021ec60] skb_pull+0x24/0x44 LR [c01e2fbc] gfar_clean_rx_ring+0x498/0x690 Call Trace: [df7edeb0] [c01e2c1c] gfar_clean_rx_ring+0xf8/0x690 (unreliable) [df7edf20] [c01e33a8] gfar_poll_rx_sq+0x3c/0x9c [df7edf40] [c023352c] net_rx_action+0x21c/0x274 [df7edf90] [c0329000] __do_softirq+0xd8/0x240 [df7edff0] [c000c108] call_do_irq+0x24/0x3c [c0597e90] [c00041dc] do_IRQ+0x64/0xc4 [c0597eb0] [c000d920] ret_from_except+0x0/0x18 --- interrupt: 501 at arch_cpu_idle+0x24/0x5c Change the size to a signed integer and then trim off any part of the FCS that was received prior to the last fragment. Fixes: 6c389fc931bc ("gianfar: fix size of scatter-gathered frames") Signed-off-by: Andy Spencer <aspencer@spacex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29Merge branch 'net_sched-reflect-tx_queue_len-change-for-pfifo_fast'David S. Miller
Cong Wang says: ==================== net_sched: reflect tx_queue_len change for pfifo_fast This pathcset restores the pfifo_fast qdisc behavior of dropping packets based on latest dev->tx_queue_len. Patch 1 introduces a helper, patch 2 introduces a new Qdisc ops which is called when we modify tx_queue_len, patch 3 implements this ops for pfifo_fast. Please see each patch for details. --- v3: use skb_array_resize_multiple() v2: handle error case for ->change_tx_queue_len() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29net_sched: implement ->change_tx_queue_len() for pfifo_fastCong Wang
pfifo_fast used to drop based on qdisc_dev(qdisc)->tx_queue_len, so we have to resize skb array when we change tx_queue_len. Other qdiscs which read tx_queue_len are fine because they all save it to sch->limit or somewhere else in qdisc during init. They don't have to implement this, it is nicer if they do so that users don't have to re-configure qdisc after changing tx_queue_len. Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29net_sched: plug in qdisc ops change_tx_queue_lenCong Wang
Introduce a new qdisc ops ->change_tx_queue_len() so that each qdisc could decide how to implement this if it wants. Previously we simply read dev->tx_queue_len, after pfifo_fast switches to skb array, we need this API to resize the skb array when we change dev->tx_queue_len. To avoid handling race conditions with TX BH, we need to deactivate all TX queues before change the value and bring them back after we are done, this also makes implementation easier. Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29net: introduce helper dev_change_tx_queue_len()Cong Wang
This patch promotes the local change_tx_queue_len() to a core helper function, dev_change_tx_queue_len(), so that rtnetlink and net-sysfs could share the code. This also prepares for the following patch. Note, the -EFAULT in the original code doesn't make sense, we should propagate the errno from notifiers. Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29vhost_net: stop device during reset ownerJason Wang
We don't stop device before reset owner, this means we could try to serve any virtqueue kick before reset dev->worker. This will result a warn since the work was pending at llist during owner resetting. Fix this by stopping device during owner reset. Reported-by: syzbot+eb17c6162478cc50632c@syzkaller.appspotmail.com Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29Merge branch 'net-Ease-to-follow-an-interface-that-moves-to-another-netns'David S. Miller
Nicolas Dichtel says: ==================== net: Ease to follow an interface that moves to another netns The goal of this series is to ease the user to follow an interface that moves to another netns. After this series, with a patched iproute2: $ ip netns bar foo $ ip monitor link & $ ip link set dummy0 netns foo Deleted 5: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default link/ether 6e:a7:82:35:96:46 brd ff:ff:ff:ff:ff:ff new-nsid 0 new-ifindex 6 => new nsid: 0, new ifindex: 6 (was 5 in the previous netns) $ ip link set eth1 netns bar Deleted 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default link/ether 52:54:01:12:34:57 brd ff:ff:ff:ff:ff:ff new-nsid 1 new-ifindex 3 => new nsid: 1, new ifindex: 3 (same ifindex) $ ip netns bar (id: 1) foo (id: 0) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29dev: advertise the new ifindex when the netns iface changesNicolas Dichtel
The goal is to let the user follow an interface that moves to another netns. CC: Jiri Benc <jbenc@redhat.com> CC: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29dev: always advertise the new nsid when the netns iface changesNicolas Dichtel
The user should be able to follow any interface that moves to another netns. There is no reason to hide physical interfaces. CC: Jiri Benc <jbenc@redhat.com> CC: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29net: ethernet: cavium: Correct Cavium Thunderx NIC driver names accordingly ↵Vadim Lomovtsev
to module name It was found that ethtool provides unexisting module name while it queries the specified network device for associated driver information. Then user tries to unload that module by provided module name and fails. This happens because ethtool reads value of DRV_NAME macro, while module name is defined at the driver's Makefile. This patch is to correct Cavium CN88xx Thunder NIC driver names (DRV_NAME macro) 'thunder-nicvf' to 'nicvf' and 'thunder-nic' to 'nicpf', sync bgx and xcv driver names accordingly to their module names. Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29Merge branch 'ptr_ring-fixes'David S. Miller
Michael S. Tsirkin says: ==================== ptr_ring fixes This fixes a bunch of issues around ptr_ring use in net core. One of these: "tap: fix use-after-free" is also needed on net, but can't be backported cleanly. I will post a net patch separately. Lightly tested - Jason, could you pls confirm this addresses the security issue you saw with ptr_ring? Testing reports would be appreciated too. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Jason Wang <jasowang@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2018-01-29tools/virtio: fix smp_mb on x86Michael S. Tsirkin
Offset 128 overlaps the last word of the redzone. Use 132 which is always beyond that. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29tools/virtio: copy READ/WRITE_ONCEMichael S. Tsirkin
This is to make ptr_ring test build again. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29tools/virtio: more stubs to fix tools buildMichael S. Tsirkin
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29tools/virtio: switch to __ptr_ring_emptyMichael S. Tsirkin
We don't rely on lockless guarantees, but it seems cleaner than inverting __ptr_ring_peek. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29ptr_ring: prevent queue load/store tearingMichael S. Tsirkin
In theory compiler could tear queue loads or stores in two. It does not seem to be happening in practice but it seems easier to convert the cases where this would be a problem to READ/WRITE_ONCE than worry about it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29skb_array: use __ptr_ring_emptyMichael S. Tsirkin
__skb_array_empty should use __ptr_ring_empty since that's the only legal lockless function. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29Revert "net: ptr_ring: otherwise safe empty checks can overrun array bounds"Michael S. Tsirkin
This reverts commit bcecb4bbf88aa03171c30652bca761cf27755a6b. If we try to allocate an extra entry as the above commit did, and when the requested size is UINT_MAX, addition overflows causing zero size to be passed to kmalloc(). kmalloc then returns ZERO_SIZE_PTR with a subsequent crash. Reported-by: syzbot+87678bcf753b44c39b67@syzkaller.appspotmail.com Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29ptr_ring: disallow lockless __ptr_ring_fullMichael S. Tsirkin
Similar to bcecb4bbf88a ("net: ptr_ring: otherwise safe empty checks can overrun array bounds") a lockless use of __ptr_ring_full might cause an out of bounds access. We can fix this, but it's easier to just disallow lockless __ptr_ring_full for now. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29tap: fix use-after-freeMichael S. Tsirkin
Lockless access to __ptr_ring_full is only legal if ring is never resized, otherwise it might cause use-after free errors. Simply drop the lockless test, we'll drop the packet a bit later when produce fails. Fixes: 362899b8 ("macvtap: switch to use skb array") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29ptr_ring: READ/WRITE_ONCE for __ptr_ring_emptyMichael S. Tsirkin
Lockless __ptr_ring_empty requires that consumer head is read and written at once, atomically. Annotate accordingly to make sure compiler does it correctly. Switch locked callers to __ptr_ring_peek which does not support the lockless operation. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29ptr_ring: clean up documentationMichael S. Tsirkin
The only function safe to call without locks is __ptr_ring_empty. Move documentation about lockless use there to make sure people do not try to use __ptr_ring_peek outside locks. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29ptr_ring: keep consumer_head valid at all timesMichael S. Tsirkin
The comment near __ptr_ring_peek says: * If ring is never resized, and if the pointer is merely * tested, there's no need to take the lock - see e.g. __ptr_ring_empty. but this was in fact never possible since consumer_head would sometimes point outside the ring. Refactor the code so that it's always pointing within a ring. Fixes: c5ad119fb6c09 ("net: sched: pfifo_fast use skb_array") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29ipv6: Fix SO_REUSEPORT UDP socket with implicit sk_ipv6onlyMartin KaFai Lau
If a sk_v6_rcv_saddr is !IPV6_ADDR_ANY and !IPV6_ADDR_MAPPED, it implicitly implies it is an ipv6only socket. However, in inet6_bind(), this addr_type checking and setting sk->sk_ipv6only to 1 are only done after sk->sk_prot->get_port(sk, snum) has been completed successfully. This inconsistency between sk_v6_rcv_saddr and sk_ipv6only confuses the 'get_port()'. In particular, when binding SO_REUSEPORT UDP sockets, udp_reuseport_add_sock(sk,...) is called. udp_reuseport_add_sock() checks "ipv6_only_sock(sk2) == ipv6_only_sock(sk)" before adding sk to sk2->sk_reuseport_cb. In this case, ipv6_only_sock(sk2) could be 1 while ipv6_only_sock(sk) is still 0 here. The end result is, reuseport_alloc(sk) is called instead of adding sk to the existing sk2->sk_reuseport_cb. It can be reproduced by binding two SO_REUSEPORT UDP sockets on an IPv6 address (!ANY and !MAPPED). Only one of the socket will receive packet. The fix is to set the implicit sk_ipv6only before calling get_port(). The original sk_ipv6only has to be saved such that it can be restored in case get_port() failed. The situation is similar to the inet_reset_saddr(sk) after get_port() has failed. Thanks to Calvin Owens <calvinowens@fb.com> who created an easy reproduction which leads to a fix. Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-23 18:51:02 +0000