summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-01-25netxen: fix netxen_nic_poll() logicEric Dumazet
NAPI poll logic now enforces that a poller returns exactly the budget when it wants to be called again. If a driver limits TX completion, it has to return budget as well when the limit is hit, not the number of received packets. Reported-and-tested-by: Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: d75b1ade567f ("net: less interrupt masking in NAPI") Cc: Manish Chopra <manish.chopra@qlogic.com> Acked-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24enic: fix rx napi poll return valueGovindarajulu Varadarajan
With the commit d75b1ade567ffab ("net: less interrupt masking in NAPI") napi repoll is done only when work_done == budget. When we are in busy_poll we return 0 in napi_poll. We should return budget. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24Merge tag 'wireless-drivers-for-davem-2015-01-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers ath9k: * fix an IRQ storm caused by commit 872b5d814f99 iwlwifi: * A fix for scan that fixes a firmware assertion * A fix that improves roaming behavior. Same fix has been tested for a while in iwldvm. This is a bit of a work around, but the real fix should be in mac80211 and will come later. * A fix for BARs that avoids a WARNING. * one fix for rfkill while scheduled scan is running. Linus's system hit this issue. WiFi would be unavailable after this has happpened because of bad state in cfg80211. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24ARM: dts: imx6sx: correct i.MX6sx sdb board enet phy addressNimrod Andy
The commit (3d125f9c91c5) cause i.MX6SX sdb enet cannot work. The cause is the commit add mdio node with un-correct phy address. The patch just correct i.MX6sx sdb board enet phy address. V2: * As Shawn's suggestion that unit-address should match 'reg' property, so update ethernet-phy unit-address. Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Fugang Duan <B38611@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi pULL SCSI fixes from James Bottomley: "This consists of four real fixes and three MAINTAINER updates. Three of the fixes are obvious (the DIX and atomic allocation are bug on and warn on fixes and the other is just trivial) and the ipr one is a bit more involved but is required because without it, the card double completes aborted commands and causes a kernel oops" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: MAINTAINERS: ibmvscsi driver maintainer change MAINTAINERS: ibmvfc driver maintainer change MAINTAINERS: Remove self as isci maintainer scsi_debug: test always evaluates to false, || should be used instead scsi: Avoid crashing if device uses DIX but adapter does not support it scsi_debug: use atomic allocation in resp_rsup_opcodes ipr: wait for aborted command responses
2015-01-24Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog fixes from Wim Van Sebroeck: "This will fix reboot issues with the imx2_wdt driver and it also drops some forgotten owner assignments from platform_drivers" * git://www.linux-watchdog.org/linux-watchdog: watchdog: drop owner assignment from platform_drivers watchdog: imx2_wdt: Disable power down counter on boot watchdog: imx2_wdt: Improve power management support.
2015-01-24Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon update from Jean Delvare: "This contains a single thing: a new driver for the temperature sensor embedded in the Intel 5500/5520/X58 chipsets. Sorry for the late request, it's been so long since I last sent a pull request and I've been so busy with other tasks meanwhile that I simply forgot about these patches. But given that this is a new driver, it can't introduce any regression so I thought it could still be OK. This has been in linux-next for months now" * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (i5500_temp) Convert to use ATTRIBUTE_GROUPS macro hwmon: (i5500_temp) Convert to module_pci_driver hwmon: (i5500_temp) Don't bind to disabled sensors hwmon: (i5500_temp) Convert to devm_hwmon_device_register_with_groups hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsets
2015-01-24Merge tag 'media/v3.19-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - fix some race conditions caused by a regression on videobuf2 - fix a interrupt release bug on cx23885 - fix support for Mygica T230 and HVR4400 - fix compilation breakage when USB is not selected on tlg2300 - fix capabilities report on ompa3isp, soc-camera, rcar_vin and pvrusb2 * tag 'media/v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] omap3isp: Correctly set QUERYCAP capabilities [media] cx23885: fix free interrupt bug [media] pvrusb2: fix missing device_caps in querycap [media] vb2: fix vb2_thread_stop race conditions [media] rcar_vin: Update device_caps and capabilities in querycap [media] soc-camera: fix device capabilities in multiple camera host drivers [media] Fix Mygica T230 support [media] cx23885: Split Hauppauge WinTV Starburst from HVR4400 card entry [media] tlg2300: Fix media dependencies
2015-01-24dm: fix handling of multiple internal suspendsMikulas Patocka
Commit ffcc393641 ("dm: enhance internal suspend and resume interface") attempted to handle multiple internal suspends on the same device, but it did that incorrectly. When these functions are called in this order on the same device the device is no longer suspended, but it should be: dm_internal_suspend_noflush dm_internal_suspend_noflush dm_internal_resume Fix this bug by maintaining an 'internal_suspend_count' and resuming the device when this count drops to zero. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-01-24hwmon: (i5500_temp) Convert to use ATTRIBUTE_GROUPS macroAxel Lin
Use ATTRIBUTE_GROUPS macro to simplify the code a bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2015-01-24hwmon: (i5500_temp) Convert to module_pci_driverAxel Lin
Use module_pci_driver to simplify the code a bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2015-01-24hwmon: (i5500_temp) Don't bind to disabled sensorsJean Delvare
On many motherboards, for an unknown reason, the thermal sensor seems to be disabled and will return a constant temperature value of 36.5 degrees Celsius. Don't bind to the device in that case, so that we don't report this bogus value to userspace. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Romain Dolbeau <romain@dolbeau.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2015-01-24hwmon: (i5500_temp) Convert to devm_hwmon_device_register_with_groupsJean Delvare
Use devm_hwmon_device_register_with_groups() to simplify the code a bit. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Romain Dolbeau <romain@dolbeau.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2015-01-24hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsetsJean Delvare
The Intel 5500, 5520 and X58 chipsets embed a digital thermal sensor. This new driver supports it. Note that on many boards the sensor seems to be disabled and reports the minimum value (36.5 degrees Celsius) all the time. Signed-off-by: Jean Delvare <jdelvare@suse.de> Tested-by: Romain Dolbeau <romain@dolbeau.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2015-01-24hrtimer: Make __hrtimer_get_next_event() statickbuild test robot
kernel/time/hrtimer.c:444:9: sparse: symbol '__hrtimer_get_next_event' was not declared. Should it be static? Fixes: 9bc7491906b4 hrtimer: Prevent stale expiry time in hrtimer_interrupt() Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Cc: kbuild-all@01.org Link: http://lkml.kernel.org/r/20150123121206.GA4766@snb Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-24x86, init: Fix UP boot regression on x86_64Thomas Gleixner
Commit 30b8b0066caf "init: Get rid of x86isms" broke the UP boot on x86_64. That happens because CONFIG_UP_LATE_INIT depends on CONFIG_X86_UP_APIC. X86_UP_APIC is a 32bit only config switch and therefor not set on 64bit UP builds. As a consequence the UP init of the local APIC and the IOAPIC is not called, which results in a boot failure. Make it depend on !SMP && X86_LOCAL_APIC instead. Fixes: 30b8b0066caf init: Get rid of x86isms Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-24Merge tag 'fortglx-3.20-time' of ↵Thomas Gleixner
https://git.linaro.org/people/john.stultz/linux into timers/core Pull time updates from John Stultz for 3.20: * ktime division optimization * Expose a few more y2038-safe timekeeping interfaces * RTC core changes to address y2038
2015-01-23amd-xgbe: Use proper Rx flow control registerLendacky, Thomas
Updated hardware documention shows the Rx flow control settings were moved from the Rx queue operation mode register to a new Rx queue flow control register. The old flow control settings are now reserved areas of the Rx queue operation mode register. Update the code to use the new register. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24i2c: s3c2410: fix ABBA deadlock by keeping clock preparedPaul Osmialowski
This patch solves deadlock between clock prepare mutex and regmap mutex reported by Tomasz Figa in [1] by implementing solution from [2]: "always leave the clock of the i2c controller in a prepared state". [1] https://lkml.org/lkml/2014/7/2/171 [2] https://lkml.org/lkml/2014/7/2/207 On each i2c transfer handled by s3c24xx_i2c_xfer(), clk_prepare_enable() was called, which calls clk_prepare() then clk_enable(). clk_prepare() takes prepare_lock mutex before proceeding. Note that i2c transfer functions are invoked from many places in kernel, typically with some other additional lock held. It may happen that function on CPU1 (e.g. regmap_update_bits()) has taken a mutex (i.e. regmap lock mutex) then it attempts i2c communication in order to proceed (so it needs to obtain clock related prepare_lock mutex during transfer preparation stage due to clk_prepare() call). At the same time other task on CPU0 wants to operate on clock (e.g. to (un)prepare clock for some other reason) so it has taken prepare_lock mutex. CPU0: CPU1: clk_disable_unused() regulator_disable() clk_prepare_lock() map->lock(map->lock_arg) regmap_read() s3c24xx_i2c_xfer() map->lock(map->lock_arg) clk_prepare_lock() Implemented solution from [2] leaves i2c clock prepared. Preparation is done in s3c24xx_i2c_probe() function. Without this patch, it is immediately unprepared by clk_disable_unprepare() call. I've replaced this call with clk_disable() and I've added clk_unprepare() call in s3c24xx_i2c_remove(). The s3c24xx_i2c_xfer() function now uses clk_enable() instead of clk_prepare_enable() (and clk_disable() instead of clk_unprepare_disable()). Signed-off-by: Paul Osmialowski <p.osmialowsk@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2015-01-24i2c: slave-eeprom: fix boundary check when using sysfsWolfram Sang
Due to a copy&paste error, the last byte of the shared memory was not accessible via sysfs. Reported-by: Debora Grosse <debora@mds.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-24i2c: st: Rename clock reference to something that existsLee Jones
CLK_S_ICN_REG_0 hasn't existed for a while now. This was renamed over a few commits, then finally removed in commit 5aa02b9 (ARM: STi: DT: STiH415: Remove unused CLK_S_ICN_REG_0 fixed clock). Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "We have a few fixes in my for-linus branch. Qu Wenruo's batch fix a regression between some our merge window pull and the inode_cache feature. The rest are smaller bugs" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: Don't call btrfs_start_transaction() on frozen fs to avoid deadlock. btrfs: Fix the bug that fs_info->pending_changes is never cleared. btrfs: fix state->private cast on 32 bit machines Btrfs: fix race deleting block group from space_info->ro_bgs list Btrfs: fix incorrect freeing in scrub_stripe btrfs: sync ioctl, handle errors after transaction start
2015-01-23rtc: Convert rtc_set_ntp_time() to use timespec64Xunlei Pang
rtc_set_ntp_time() uses timespec which is y2038-unsafe, so modify to use timespec64 which is y2038-safe, then replace rtc_time_to_tm() with rtc_time64_to_tm(). Also adjust all its call sites(only NTP uses it) accordingly. Cc: pang.xunlei <pang.xunlei@linaro.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-01-23rtc: Remove redundant rtc_valid_tm() from rtc_hctosys()Xunlei Pang
rtc_read_time() has already judged valid tm by rtc_valid_tm(), so just remove it. Cc: pang.xunlei <pang.xunlei@linaro.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-01-23rtc: Modify rtc_hctosys() to address y2038 issuesXunlei Pang
rtc_hctosys() has a number of y2038 issues. This patch resolves them by: - Replace rtc_tm_to_time() with y2038-safe rtc_tm_to_time64() - Replace do_settimeofday() with y2038-safe do_settimeofday64() After this patch, it should not have any remaining y2038 issues. Cc: pang.xunlei <pang.xunlei@linaro.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-01-23rtc: Update rtc-dev to use y2038-safe time interfacesXunlei Pang
Currently, rtc-dev.c uses y2038 problematic rtc_tm_to_time() and rtc_time_to_tm(). So replace them with their corresponding y2038-safe versions: rtc_tm_to_time64() and rtc_time64_to_tm(). Cc: pang.xunlei <pang.xunlei@linaro.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-01-23rtc: Update interface.c to use y2038-safe time interfacesXunlei Pang
Currently, interface.c uses y2038 problematic rtc_tm_to_time() and rtc_time_to_tm(). So replace them with their corresponding y2038-safe versions: rtc_tm_to_time64() and rtc_time64_to_tm(). Cc: pang.xunlei <pang.xunlei@linaro.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-01-23time: Expose get_monotonic_boottime64 for in-kernel useJohn Stultz
As part of the 2038 conversion process, add a get_monotonic_boottime64 accessor so we can depracate get_monotonic_boottime. Cc: pang.xunlei <pang.xunlei@linaro.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-01-23time: Expose getboottime64 for in-kernel usesJohn Stultz
Adds a timespec64 based getboottime64() implementation that can be used as we convert internal users of getboottime away from using timespecs. Cc: pang.xunlei <pang.xunlei@linaro.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-01-23ktime: Optimize ktime_divns for constant divisorsNicolas Pitre
At least on ARM, do_div() is optimized to turn constant divisors into an inline multiplication by the reciprocal value at compile time. However this optimization is missed entirely whenever ktime_divns() is used and the slow out-of-line division code is used all the time. Let ktime_divns() use do_div() inline whenever the divisor is constant and small enough. This will make things like ktime_to_us() and ktime_to_ms() much faster. Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Nicolas Pitre <nico@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-01-23PCI: Fix infinite loop with ROM image of size 0Michel Dänzer
If the image size would ever read as 0, pci_get_rom_size() could keep processing the same image over and over again. Exit the loop if we ever read a length of zero. This fixes a soft lockup on boot when the radeon driver calls pci_get_rom_size() on an AMD Radeon R7 250X PCIe discrete graphics card. [bhelgaas: changelog, reference] Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1386973 Reported-by: Federico <federicotg@gmail.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org
2015-01-24Merge tag 'platform-drivers-x86-v3.19-2' of ↵Linus Torvalds
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull platform driver fix from Darren Hart: "Revert keyboard backlight sysfs support and documentation. The support for the dell-laptop keyboard backlight was flawed and the fix: https://lkml.org/lkml/2015/1/14/539 was more invasive that I felt comfortable sending at RC5. This series reverts the support for the dell-laptop keyboard backlight as well as the documentation for the newly created sysfs attributes. We'll get this implemented correctly for 3.20" * tag 'platform-drivers-x86-v3.19-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: Revert "platform: x86: dell-laptop: Add support for keyboard backlight" Revert "Documentation: Add entry for dell-laptop sysfs interface"
2015-01-23PCI: xgene: Include clk.h instead of clk-private.hStephen Boyd
This driver should be including clk.h as it's a clock consumer, not a clock provider that needs to register clocks early. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Tanmay Inamdar <tinamdar@apm.com>
2015-01-23PCI: Add Wellsburg (X99) to Intel PCH root port ACS quirkAlex Williamson
Intel has confirmed that the Wellsburg chipset, while not reporting ACS, does provide the proper isolation through the RCBA/BSPR registers, so the same quirk works for this set of device IDs. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Don Dugger <donald.d.dugger@intel.com>
2015-01-24Merge tag 'pci-v3.19-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These are fixes for: - a resource management problem that causes a Radeon "Fatal error during GPU init" on machines where the BIOS programmed an invalid Root Port window. This was a regression in v3.16. - an Atheros AR93xx device that doesn't handle PCI bus resets correctly. This was a regression in v3.14. - an out-of-date email address" * tag 'pci-v3.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Update Richard Zhu's email address sparc/PCI: Clip bridge windows to fit in upstream windows powerpc/PCI: Clip bridge windows to fit in upstream windows parisc/PCI: Clip bridge windows to fit in upstream windows mn10300/PCI: Clip bridge windows to fit in upstream windows microblaze/PCI: Clip bridge windows to fit in upstream windows ia64/PCI: Clip bridge windows to fit in upstream windows frv/PCI: Clip bridge windows to fit in upstream windows alpha/PCI: Clip bridge windows to fit in upstream windows x86/PCI: Clip bridge windows to fit in upstream windows PCI: Add pci_claim_bridge_resource() to clip window if necessary PCI: Add pci_bus_clip_resource() to clip to fit upstream window PCI: Pass bridge device, not bus, when updating bridge windows PCI: Mark Atheros AR93xx to avoid bus reset PCI: Add flag for devices where we can't use bus reset
2015-01-24Merge tag 'devicetree-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree bug fixes and documentation updates from Grant Likely: "A few bugfixes for the new DT overlay feature, documentation updates, spelling corrections, and changes to MAINTAINERS. Nothing earth shattering here" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: of/unittest: Overlays with sub-devices tests of/platform: Handle of_populate drivers in notifier of/overlay: Do not generate duplicate nodes devicetree: document the "qemu" and "virtio" vendor prefixes devicetree: document ARM bindings for QEMU's Firmware Config interface Documentation: of: fix typo in graph bindings dma-mapping: fix debug print to display correct dma_pfn_offset of: replace Asahi Kasei Corp vendor prefix ARM: dt: GIC: Spelling s/specific/specifier/, s/flaggs/flags/ dt/bindings: arm-boards: Spelling s/pointong/pointing/ MAINTAINERS: Update DT website and git repository MAINTAINERS: drop DT regex matching on of_get_property and of_match_table
2015-01-23Merge tag 'imx-fixes-3.19-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.19, 2nd round" from Shawn Guo: The i.MX fixes for 3.19, 2nd round: - Correct pwm clock assignment in i.MX25 device tree to fix the broken pwm support on i.MX25 * tag 'imx-fixes-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx25: Fix PWM "per" clocks Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-23arm64: dts: add baud rate to Juno stdout-pathRobin Murphy
Without explicit command-line parameters, the Juno UART ends up running at 57600 baud in the kernel, which is at odds with the 115200 baud used by the rest of the firmware. Since commit 7914a7c5651a5161 now lets us fix this by specifying default options in stdout-path, do so. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-23PM / Domains: Remove pm_genpd_dev_need_restore() APIUlf Hansson
There are currently no users of this API, let's remove it. Additionally, if such feature would be needed future wise, a better option is likely use pm_runtime_set_active|suspended() in some form. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23PM / hibernate: Remove unused functionRickard Strandqvist
Remove the function get_safe_write_buffer() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23Merge tag 'mvebu-fixes-3.19-4' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson
Merge "mvebu/fixes #3" from Andrew Lunn: mvebu fixes for 3.19. (Part 4) bus: mvebu-mbus: fix support of MBus window 13 * tag 'mvebu-fixes-3.19-4' of git://git.infradead.org/linux-mvebu: bus: mvebu-mbus: fix support of MBus window 13 ARM: mvebu: completely disable hardware I/O coherency Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-23cpufreq: stats: drop unnecessary lockingViresh Kumar
There is no possibility of any race on updating last_index, trans_table or total_trans as these are updated only by cpufreq_stat_notifier_trans() which will be called sequentially. The only place where locking is still relevant is: cpufreq_stats_update(), which updates time_in_state and last_time. This can be called by two thread in parallel, that may result in races. The two threads being: - sysfs read of time_in_state - and frequency transition that calls cpufreq_stat_notifier_trans(). Remove locking from the first case mentioned above. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23cpufreq: stats: don't update stats on false notifiersViresh Kumar
We need to call cpufreq_stats_update() to update 'time_in_state' for the last frequency. This is achieved by calling it from cpufreq_stat_notifier_trans(), which is called after frequency transition. But if we detect that the cpu's frequency haven't really changed and its a false POSTCHANGE notification, we don't really need to update time_in_state. It wouldn't cause any harm in calling cpufreq_stats_update() but we can avoid calling it here and call it when the frequency really changes. The result will be the same but more efficient. Reviewed-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23cpufreq: stats: don't update stats from show_trans_table()Viresh Kumar
cpufreq_stats_update() updates time_in_state and nothing else. It should ideally be updated only in two cases: - User requested for the current value of time_in_state. - We have switched states and so need to update time for the last state. Currently, we are also doing this while user asks for the transition table of frequencies. It wouldn't do any harm, but no good as well. Its useless here. Remove it. Reviewed-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23cpufreq: stats: time_in_state can't be NULL in cpufreq_stats_update()Viresh Kumar
'time_in_state' can't be NULL if 'stats' is valid. These are allocated together and only if time_in_state is allocated successfully, we update policy->stats. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23cpufreq: stats: create sysfs group once we are readyViresh Kumar
Userspace is free to read value of any file from cpufreq/stats directory once they are created. __cpufreq_stats_create_table() is creating the sysfs files first and then allocating resources for them. Though it would be quite difficult to trigger the racy situation here, but for the sake of keeping sensible code lets create sysfs entries only after we are ready to go. This also does some makeup to the routine to make it look better. Reviewed-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23cpufreq: remove CPUFREQ_UPDATE_POLICY_CPU notificationsViresh Kumar
CPUFREQ_UPDATE_POLICY_CPU notifications were used only from cpufreq-stats which doesn't use it anymore. Remove them. This also decrements values of other notification macros defined after CPUFREQ_UPDATE_POLICY_CPU by 1 to remove gaps. Hopefully all users are using macro's instead of direct numbers and so they wouldn't break as macro values are changed now. Reviewed-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23cpufreq: stats: drop 'cpu' field of struct cpufreq_statsViresh Kumar
'cpu' field of struct cpufreq_stats isn't used anymore and so can be dropped. This change makes cpufreq_stats_update_policy_cpu() empty and so that is removed as well. Reviewed-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23cpufreq: Remove (now) unused 'last_cpu' from struct cpufreq_policyViresh Kumar
'last_cpu' was used only from cpufreq-stats and isn't used anymore. Get rid of it. Reviewed-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-23cpufreq: stats: rename 'struct cpufreq_stats' objects as 'stats'Viresh Kumar
Currently we name objects of 'struct cpufreq_stats' as 'stat' and 'stats'. Use 'stats' to make it consistent. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-09-15 04:53:14 +0000